[SOLVED] Thunar doesn't show any USB storage devices.

Hi,
i'm using arch for a quite long time now and thankfully never had to use the support forums, because of the great wiki but this time i really got stuck...
Installed a fresh arch a few days ago, because of an HDD Crash and now i can't see any USB devices (SD-Cards/USB-Sticks) in Thunar anymore and so i always have to mount them in terminal :-/
Already installed thunar-volman and gamin, and  i am member of the storage group.
Any help ? Thanks !
Last edited by JHnet (2012-11-10 06:26:12)

Well..Fuck. Just had to install gvfs - as mentioned in the wiki -..

Similar Messages

  • [SOLVED] Thunar doesn't show external volumes anymore

    Hello,
    Thunar used to show external devices (USB sticks, iPod, ...) in the left panel (when displaying shortcuts instead of tree). For some reason I can't figure, it doesn't do it anymore.
    All I have in the left panel is the standard "home, Desktop, filesystem" and the static links to the different folders I placed there.
    I tried to uninstall completely thunar and remove the configuration files, then re-install it, but it changed nothing.
    Desktop : openbox.
    Running daemons (I'm not sure if all of theme are relevant) : dbus, hal, fam.
    .config/Thunar/thunarrc :
    [Configuration]
    DefaultView=void
    LastCompactViewZoomLevel=THUNAR_ZOOM_LEVEL_SMALLEST
    LastDetailsViewColumnOrder=THUNAR_COLUMN_NAME,THUNAR_COLUMN_SIZE,THUNAR_COLUMN_TYPE,THUNAR_COLUMN_DATE_MODIFIED
    LastDetailsViewColumnWidths=50,204,50,50,134,50,50,64,109
    LastDetailsViewFixedColumns=FALSE
    LastDetailsViewVisibleColumns=THUNAR_COLUMN_DATE_MODIFIED,THUNAR_COLUMN_NAME,THUNAR_COLUMN_SIZE,THUNAR_COLUMN_TYPE
    LastDetailsViewZoomLevel=THUNAR_ZOOM_LEVEL_SMALLER
    LastIconViewZoomLevel=THUNAR_ZOOM_LEVEL_NORMAL
    LastLocationBar=ThunarLocationButtons
    LastSeparatorPosition=184
    LastShowHidden=FALSE
    LastSidePane=ThunarShortcutsPane
    LastSortColumn=THUNAR_COLUMN_NAME
    LastSortOrder=GTK_SORT_ASCENDING
    LastStatusbarVisible=TRUE
    LastView=ThunarIconView
    LastWindowHeight=441
    LastWindowWidth=743
    LastWindowMaximized=FALSE
    MiscVolumeManagement=TRUE
    MiscCaseSensitive=FALSE
    MiscDateStyle=THUNAR_DATE_STYLE_SIMPLE
    MiscFoldersFirst=TRUE
    MiscHorizontalWheelNavigates=FALSE
    MiscRecursivePermissions=THUNAR_RECURSIVE_PERMISSIONS_ASK
    MiscRememberGeometry=TRUE
    MiscShowAboutTemplates=TRUE
    MiscShowThumbnails=TRUE
    MiscSingleClick=FALSE
    MiscSingleClickTimeout=500
    MiscTextBesideIcons=FALSE
    ShortcutsIconEmblems=TRUE
    ShortcutsIconSize=THUNAR_ICON_SIZE_SMALLER
    TreeIconEmblems=TRUE
    TreeIconSize=THUNAR_ICON_SIZE_SMALLEST
    What should I do to get it working again ?
    Thanks in advance !
    PS : please tell me if I forgot anything. Also, I searched for similar topics in the forum, but haven't found anything.
    Last edited by Alfred456654 (2011-02-11 07:13:58)

    Hello,
    Yes, I have gvfs installed :
    yaourt -Ss gvfs
    1 extra/gvfs 1.6.6-1 [installé]
    Userspace virtual filesystem implemented as a pluggable module for gio
    2 extra/gvfs-afc 1.6.6-1 [installé]
    AFC (mobile devices) backend for gvfs
    3 extra/gvfs-gphoto2 1.6.6-1
    gphoto2 (PTP camera/MTP media player) backend for gvfs
    4 extra/gvfs-obexftp 1.6.6-1
    ObexFTP (bluetooth) backend for gvfs
    5 extra/gvfs-smb 1.6.6-1 [installé]
    SMB/CIFS (Windows client) backend for gvfs

  • Statellite M100 won't recognise any USB storage devices or SD card

    I've been having problems with my Toshiba M100 Satellite series notebook not reading Sandisk SD card from my son's camera - it's a 2GB card and from what i've read online maybe that's the problem BUT the notebook is also not reading any of my USB 'stick' devices. When i insert the SD card or a USB 'stick' it asks me to instal driver software which is just stupid. I've tried connecting the camera via a usb cable too and it won't recognise the device and, again, asks for device driver software.
    I've looked on the toshiba website and have installed all updates that i thought might be appropriate, i'm also in the process of running Windows update (do this at least every 2nd week anyway so it shouldn't be a problem). I'm running Vista Home Edition (32bit). The USB ports have definately worked in the past, I really don't want to resort to running recovery discs if i don't have too as i don't want to lose all the stuff i have stored.
    The SD Card/USB issue seems to be a common one but i can't find a specific fix on this or any other tech site, any suggestions?
    Cheers

    In your case I would do two things.
    First: Check if a new BIOS is available. Look on the Toshiba website and make an update.
    Second: Reinstall the laptop with the recovery disks. I know that you will lose all data, but you can save it on DVDs or external HDD.

  • [SOLVED]Udev: How to easily automount usb/storage devices?...

    Hello there everyone, first time posting here.
    So as for my question, I recently finished up my preferred install for arch but I have just one problem. Can't seem to get Udev working right.
    Before I was using debian with the same Udev automount rules posted in the wiki actually. Then I tried the same ones migrating to arch but they don't seem to work. After searching for my netbook, getting the runaround, then searching for an alternative method and getting the same it's getting kind of annoying. So here I am.
    I'm running Arch with LXDE and all default DE components(PCmanFM, openbox, etc). I don't have HAL installed, only udisks and udev as PnP support. Any help?
    (Also in specific, I was using the second rule in the Udev wiki page. The one with LUKS support)
    (Ah, nevermind is was just a tiny bit of a syntax error. A little bit more googling helped me find the answer)
    Last edited by jjsullivan (2011-02-10 09:03:33)

    v43 wrote:i'll tell you anyway
    my choice was autofs (+hal). no volume managers.
    it works like a charm with thunar (and pcmanfm too).
    Its nice that you told anyway, solved my problem

  • When I try to boot my macbook pro the startup manager doesn't show any drives. How can I solve this issue?

    when I try to boot my macbook pro the startup manager doesn't show any drives. How can I solve this issue?

    Please confirm what version of OS X you are running - I doubt it is the ancient OS 10.1 !

  • Thunar doesn't show the partitions mounted in fstab[SOLVED]

    Hi everyone,
    I am running XFCE 4.10 in archlinux and today when i added couple of partitions to fstab and rebooted my system I noticed that thunar doesn't show the partitions that I added to my fstab. what should i do to make it appear in thunar ?
    here is my fstab:
    /dev/sda5 /media/disk ntfs-3g defaults 0 0
    /dev/sda2 /media/disk-1 ntfs-3g defaults 0 0
    Last edited by pyarch (2012-10-03 22:03:54)

    Maybe an old thread, but I came up with a different solution. By default Thunar mounts NTFS partitions under
    /run/media/<username>/<UUID of NTFS drive> .
    If the fstab is updated with a path different from above for your NTFS partitions, they end up not being displayed in bookmarks.
    So, to overcome this, create your mount points in
    /run/media/<username>/<mount point dir>
    and point to those dirs while adding entries to fstab.

  • Auto-mounting USB storage devices doesn't work

    Hi all,
    I have some problems with the auto-mounting of USB storage devices. I already installed udisks and ntfs-3g.
    When I connect the external device (it's an external hard disk WD My Passport 500GB, but I have the same problem with a SanDisk USB stick 8GB) the auto-mount doesn't work. I see a shorcut in the left panel of Thunar but if I try to use it Thunar crash without any message error.
    I try with the manual mount and it works, but the left panel of Thunar continue to have the same problem.
    In the italian Arch forum a friend suggest me to open Thunar from bash and close it. If I do it I receive this error log:
    $ thunar
    thunar: symbol lookup error: /usr/lib/libstdc++.so.6: undefined symbol: _ZNSt14error_categoryD2Ev, version GLIBCXX_3.4.15
    and this is the reply of dmesg command:
    [ 340.826768] usb 1-1: new high speed USB device number 2 using ehci_hcd
    [ 341.591397] Initializing USB Mass Storage driver...
    [ 341.592166] scsi6 : usb-storage 1-1:1.0
    [ 341.592345] usbcore: registered new interface driver usb-storage
    [ 341.592349] USB Mass Storage support registered.
    [ 341.599805] usbcore: registered new interface driver uas
    [ 342.591094] scsi 6:0:0:0: Direct-Access WD My Passport 070A 1032 PQ: 0 ANSI: 4
    [ 342.591474] sd 6:0:0:0: Attached scsi generic sg1 type 0
    [ 342.592845] scsi 6:0:0:1: CD-ROM WD Virtual CD 070A 1032 PQ: 0 ANSI: 4
    [ 342.593048] scsi 6:0:0:1: Attached scsi generic sg2 type 5
    [ 342.594050] sd 6:0:0:0: [sdb] 975400960 512-byte logical blocks: (499 GB/465 GiB)
    [ 342.594814] scsi 6:0:0:2: Enclosure WD SES Device 1032 PQ: 0 ANSI: 4
    [ 342.595141] scsi 6:0:0:2: Attached scsi generic sg3 type 13
    [ 342.596546] sd 6:0:0:0: [sdb] Write Protect is off
    [ 342.596553] sd 6:0:0:0: [sdb] Mode Sense: 23 00 10 00
    [ 342.596557] sd 6:0:0:0: [sdb] Assuming drive cache: write through
    [ 342.599163] sd 6:0:0:0: [sdb] Assuming drive cache: write through
    [ 342.618228] sdb: sdb1
    [ 342.621039] sd 6:0:0:0: [sdb] Assuming drive cache: write through
    [ 342.621046] sd 6:0:0:0: [sdb] Attached SCSI disk
    [ 342.665174] sr0: scsi3-mmc drive: 51x/51x caddy
    [ 342.665180] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 342.665447] sr 6:0:0:1: Attached scsi CD-ROM sr0
    [ 342.665654] ses 6:0:0:2: Attached Enclosure device
    [ 349.105348] [b]Thunar[996]: segfault at 0 ip b6de1660 sp bfe586f4 error 4 in libglib-2.0.so.0.2800.8[b6d6f000+ed000][/b]
    Do you have any suggestion?
    Thank you very much,
    Gianluca

    Are you using [testing]? Partially updated system?
    The error looks like you have a different version of gcc-libs / glibc than the app was built against.
    Last edited by Mr.Elendig (2011-06-20 19:16:33)

  • [solved] USB storage devices problem

    Hello everyone. I have MSI Wind U270 and recently I've moved from Ubuntu 11.04 to Arch. I really like Arch so far but I have one quite big problem and I can't find any solution, so I hope someone here could help me.
    After I'd installed Arch, I tried to copy some file from/to USB flash drive. After just few seconds, transfer failed with information about I/O errors and USB flash drive disappeared along with any other USB drives connected at the same time but logitech usb mouse and keyboard continue to work.
    My first thought was that it's simply broken USB drive, but same thing was happening also when I tried to move some files from/to any other USB storage device that I have.
    Here is sample dmesg output after I connect device:
    [ 4799.189720] usb 1-2: new high-speed USB device number 4 using ehci_hcd
    [ 4799.369911] xhci_hcd 0000:06:00.0: PME# disabled
    [ 4799.369935] xhci_hcd 0000:06:00.0: setting latency timer to 64
    [ 4799.399707] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0xfeb48000-0xfeb480ff] (PCI address [0xfeb48000-0xfeb480ff])
    [ 4799.399754] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
    [ 4799.399800] ehci_hcd 0000:00:13.2: PME# disabled
    [ 4799.399819] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 4799.426731] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 4799.520213] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 4799.690262] usbcore: registered new interface driver uas
    [ 4799.704107] Initializing USB Mass Storage driver...
    [ 4799.704420] scsi7 : usb-storage 1-2:1.0
    [ 4799.704959] usbcore: registered new interface driver usb-storage
    [ 4799.704966] USB Mass Storage support registered.
    [ 4801.166512] scsi 7:0:0:0: Direct-Access JetFlash Transcend 8GB 1100 PQ: 0 ANSI: 0 CCS
    [ 4801.168550] sd 7:0:0:0: [sdc] 15826944 512-byte logical blocks: (8.10 GB/7.54 GiB)
    [ 4801.169401] sd 7:0:0:0: [sdc] Write Protect is off
    [ 4801.169411] sd 7:0:0:0: [sdc] Mode Sense: 43 00 00 00
    [ 4801.170332] sd 7:0:0:0: [sdc] No Caching mode page present
    [ 4801.170340] sd 7:0:0:0: [sdc] Assuming drive cache: write through
    [ 4801.175736] sd 7:0:0:0: [sdc] No Caching mode page present
    [ 4801.175747] sd 7:0:0:0: [sdc] Assuming drive cache: write through
    [ 4801.176962] sdc: sdc1
    [ 4801.181454] sd 7:0:0:0: [sdc] No Caching mode page present
    [ 4801.181465] sd 7:0:0:0: [sdc] Assuming drive cache: write through
    [ 4801.181471] sd 7:0:0:0: [sdc] Attached SCSI removable disk
    [ 4801.388155] xhci_hcd 0000:06:00.0: PME# enabled
    [ 4801.439601] ehci_hcd 0000:00:13.2: PCI INT B disabled
    [ 4801.439657] ehci_hcd 0000:00:13.2: PME# enabled
    [ 4801.519628] ohci_hcd 0000:00:12.0: PCI INT A disabled
    [ 4802.346484] ohci_hcd 0000:00:13.0: PCI INT A disabled
    and when I start to copy some things to/from USB device this is what's happening:
    [ 4981.389262] ehci_hcd 0000:00:12.2: force halt; handshake ffffc90000c1e024 00004000 00000000 -> -110
    [ 4981.389271] ehci_hcd 0000:00:12.2: HC died; cleaning up
    [ 4981.389377] usb 1-2: USB disconnect, device number 4
    [ 4981.399810] sd 7:0:0:0: [sdc] Unhandled error code
    [ 4981.399820] sd 7:0:0:0: [sdc] Result: hostbyte=0x01 driverbyte=0x00
    [ 4981.399826] sd 7:0:0:0: [sdc] CDB: cdb[0]=0x2a: 2a 00 00 1f b4 7e 00 00 08 00
    [ 4981.399840] end_request: I/O error, dev sdc, sector 2077822
    [ 4981.399850] Buffer I/O error on device sdc1, logical block 259720
    [ 4981.399854] lost page write due to I/O error on sdc1
    [ 4981.404451] sd 7:0:0:0: [sdc] Unhandled error code
    [ 4981.404461] sd 7:0:0:0: [sdc] Result: hostbyte=0x01 driverbyte=0x00
    [ 4981.404467] sd 7:0:0:0: [sdc] CDB: cdb[0]=0x2a: 2a 00 00 20 34 7e 00 00 f0 00
    [ 4981.404481] end_request: I/O error, dev sdc, sector 2110590
    [ 4981.404489] Buffer I/O error on device sdc1, logical block 263816
    [ 4981.404493] lost page write due to I/O error on sdc1
    [ 4981.404500] Buffer I/O error on device sdc1, logical block 263817
    [ 4981.404504] lost page write due to I/O error on sdc1
    [ 4981.404509] Buffer I/O error on device sdc1, logical block 263818
    [ 4981.404512] lost page write due to I/O error on sdc1
    [ 4981.404517] Buffer I/O error on device sdc1, logical block 263819
    [ 4981.404521] lost page write due to I/O error on sdc1
    [ 4981.404525] Buffer I/O error on device sdc1, logical block 263820
    [ 4981.404529] lost page write due to I/O error on sdc1
    [ 4981.404534] Buffer I/O error on device sdc1, logical block 263821
    [ 4981.404537] lost page write due to I/O error on sdc1
    [ 4981.404543] Buffer I/O error on device sdc1, logical block 263822
    [ 4981.404546] lost page write due to I/O error on sdc1
    [ 4981.404550] Buffer I/O error on device sdc1, logical block 263823
    [ 4981.404554] lost page write due to I/O error on sdc1
    [ 4981.444899] usb 1-4: USB disconnect, device number 3
    Next I thought – computer is broken. But it simply couldn't be true because in Ubuntu it's working.
    I wanted to test if USB transfer is working in other distros, so I downloaded few and tried:
    Ubuntu 11.04 – everything is working
    Ubuntu 11.10 – it's not working, exactly same errors as in Arch
    Ubuntu 12.04 Alpha 2 – it's not working
    Mint 11 – it's working
    Mint 12 – it's not working
    So one thing in common that I can think of is fact that USB transfer is working in distros using kernel <3.0 and is broken in those using kernel >=3.0.
    In dmesg output I can see ehci_hcd errors. When I remove this module before moving files, than everything is working fine apart from very slow transfer but it's obvious.
    I really hope that someone will be able to help with my problem.  I don't know if it's some bug or it's just some configuration error.
    EDIT: problems were caused by rts5139 module (card reader). Blacklisting that module solved all the problems.
    Last edited by wpb (2012-07-01 08:37:02)

    Ok,  so here is part of /var/log/messages.log with failed USB transfer:
    Feb 28 20:21:40 localhost kernel: [ 117.263584] usb 3-2: new high-speed USB device number 4 using ehci_hcd
    Feb 28 20:21:40 localhost mtp-probe: checking bus 3, device 4: "/sys/devices/pci0000:00/0000:00:12.2/usb3/3-2"
    Feb 28 20:21:40 localhost kernel: [ 117.470130] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0xfeb48000-0xfeb480ff] (PCI address [0xfeb48000-0xfeb480ff])
    Feb 28 20:21:40 localhost kernel: [ 117.470251] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    Feb 28 20:21:40 localhost kernel: [ 117.546266] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    Feb 28 20:21:40 localhost mtp-probe: bus: 3, device: 4 was not an MTP device
    Feb 28 20:21:42 localhost kernel: [ 119.687034] usbcore: registered new interface driver uas
    Feb 28 20:21:42 localhost kernel: [ 119.692675] Initializing USB Mass Storage driver...
    Feb 28 20:21:42 localhost kernel: [ 119.693029] scsi7 : usb-storage 3-2:1.0
    Feb 28 20:21:42 localhost kernel: [ 119.694285] usbcore: registered new interface driver usb-storage
    Feb 28 20:21:42 localhost kernel: [ 119.694294] USB Mass Storage support registered.
    Feb 28 20:21:43 localhost kernel: [ 120.353657] ohci_hcd 0000:00:13.0: PCI INT A disabled
    Feb 28 20:21:43 localhost kernel: [ 121.110815] scsi 7:0:0:0: Direct-Access JetFlash Transcend 8GB 1100 PQ: 0 ANSI: 0 CCS
    Feb 28 20:21:43 localhost kernel: [ 121.115125] sd 7:0:0:0: [sdc] 15826944 512-byte logical blocks: (8.10 GB/7.54 GiB)
    Feb 28 20:21:43 localhost kernel: [ 121.117132] sd 7:0:0:0: [sdc] Write Protect is off
    Feb 28 20:21:43 localhost kernel: [ 121.125243] sdc: sdc1
    Feb 28 20:21:43 localhost kernel: [ 121.130244] sd 7:0:0:0: [sdc] Attached SCSI removable disk
    Feb 28 20:21:44 localhost kernel: [ 121.570240] ehci_hcd 0000:00:13.2: PCI INT B disabled
    Feb 28 20:21:44 localhost ntfs-3g[1936]: Version 2012.1.15 external FUSE 28
    Feb 28 20:21:44 localhost ntfs-3g[1936]: Mounted /dev/sdc1 (Read-Write, label "", NTFS 3.1)
    Feb 28 20:21:44 localhost ntfs-3g[1936]: Cmdline options: rw,nosuid,nodev,uhelper=udisks,uid=1000,gid=1000,dmask=0077,fmask=0177
    Feb 28 20:21:44 localhost ntfs-3g[1936]: Mount options: rw,nosuid,nodev,uhelper=udisks,allow_other,nonempty,relatime,fsname=/dev/sdc1,blkdev,blksize=4096,default_permissions
    Feb 28 20:21:44 localhost ntfs-3g[1936]: Global ownership and permissions enforced, configuration type 1
    Feb 28 20:22:11 localhost kernel: [ 148.692914] usb 3-2: USB disconnect, device number 4
    Feb 28 20:22:11 localhost kernel: [ 148.756937] sd 7:0:0:0: [sdc] Unhandled error code
    Feb 28 20:22:11 localhost kernel: [ 148.756947] sd 7:0:0:0: [sdc] Result: hostbyte=0x01 driverbyte=0x00
    Feb 28 20:22:11 localhost kernel: [ 148.756954] sd 7:0:0:0: [sdc] CDB: cdb[0]=0x2a: 2a 00 00 1e 2f f6 00 00 18 00
    Feb 28 20:22:11 localhost kernel: [ 148.756983] lost page write due to I/O error on sdc1
    Feb 28 20:22:11 localhost kernel: [ 148.757000] lost page write due to I/O error on sdc1
    Feb 28 20:22:11 localhost kernel: [ 148.757016] lost page write due to I/O error on sdc1
    Feb 28 20:22:11 localhost kernel: [ 148.761894] sd 7:0:0:0: [sdc] Unhandled error code
    Feb 28 20:22:11 localhost kernel: [ 148.761905] sd 7:0:0:0: [sdc] Result: hostbyte=0x01 driverbyte=0x00
    Feb 28 20:22:11 localhost kernel: [ 148.761911] sd 7:0:0:0: [sdc] CDB: cdb[0]=0x2a: 2a 00 00 1e 2f ae 00 00 08 00
    Feb 28 20:22:11 localhost kernel: [ 148.761939] lost page write due to I/O error on sdc1
    Feb 28 20:22:11 localhost kernel: [ 148.914173] usb 3-4: USB disconnect, device number 3
    Feb 28 20:22:24 localhost ntfs-3g[1936]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
    Feb 28 20:22:24 localhost ntfs-3g[1936]: Reading $BITMAP failed: Input/output error
    Feb 28 20:22:24 localhost ntfs-3g[1936]: Failed to allocate clusters: Input/output error
    Feb 28 20:22:24 localhost kernel: [ 161.862408] quiet_error: 2 callbacks suppressed
    Feb 28 20:22:24 localhost kernel: [ 161.862424] lost page write due to I/O error on sdc1
    Feb 28 20:22:24 localhost kernel: [ 161.862436] lost page write due to I/O error on sdc1
    Feb 28 20:22:24 localhost kernel: [ 161.862446] lost page write due to I/O error on sdc1
    Feb 28 20:22:24 localhost kernel: [ 161.862457] lost page write due to I/O error on sdc1
    Feb 28 20:22:24 localhost kernel: [ 161.862466] lost page write due to I/O error on sdc1
    Feb 28 20:22:24 localhost kernel: [ 161.862476] lost page write due to I/O error on sdc1
    Feb 28 20:22:24 localhost kernel: [ 161.862485] lost page write due to I/O error on sdc1
    Feb 28 20:22:24 localhost kernel: [ 161.862495] lost page write due to I/O error on sdc1
    Feb 28 20:22:24 localhost kernel: [ 161.862505] lost page write due to I/O error on sdc1
    Feb 28 20:22:24 localhost kernel: [ 161.862514] lost page write due to I/O error on sdc1
    Feb 28 20:22:24 localhost ntfs-3g[1936]: Unmounting /dev/sdc1 ()
    and here is complete /var/log/messages.log - I just started system and then tried to copy some files to USB drive:

  • IPS MC: It doesn´t show any signature.

    Hi.
    I had IPS MC 2.1.0 (Build 123) functioning fine. I installed the idsmdc2.1.0-win-CSCsc336961.tar file in order to solve the CSCsc33696 bug. Next, I installed an update signature for IPS version 5 (But I didn´t has any IPS sensor version 5, I just was checking), but the update didn´t work. Afther it, I noted that I have a big issue: When I try to modify any signature, in the Settings->IOS IPS, it shows:
    Object loading failed. Errors occurred while loading the Signatures. Not all signatures may have been loaded.
    It doesn´t show any signature.
    I erased all the sensors, including the IOS IPS. Then I import one of the IOS IPS and follow the instruction for the CSCsc33696 bug. I reimported the device, deployed configuration, disabled the IPS feature in the router and enabled the feature in order to load the signature configuration, but the issue persist. Then, I installed the newest signature update to IDS sensor version 4 (it includes IOS IPS update) and it installed without problems, but the problem in the sigature page perisist.
    I reinstalled the IPS MC, but the problem persist. I uninstalled the IDS MC, and installed again without save the database. It shows the application IDS MC and Security Monitor without configuration, like a new installation, but the issue persist!!!
    Someone had this problem? Someone know how can I solve it?
    Thanks.

    The Cisco IOS IPS feature restructures the existing Cisco IOS Intrusion Detection System (IDS), allowing customers to choose to load the default, built-in signatures or to load a Signature Definition File (SDF) called attack-drop.sdf onto the router. The attack-drop.sdf file contains 118 high-fidelity Intrusion Prevention System (IPS) signatures, providing customers with the latest available detection of security threats. For more information refer to following url:
    http://www.cisco.com/en/US/products/ps5854/prod_configuration_guide09186a00802c9587.html

  • Photo stream doesn't show any photo

    Listen, I have this problem when I open iCloud photos, folder "Photo Stream" shows, I open it and it doesn't show any photo taken on my iPhone, but I can play slide show and see every single photo, but only in that way with slide show, how can I fix this? It worked alright for a few days, now it's somehow different, help please.....

    GimmeCheezburgers
    This solved my questionRe: I upgraded to iOS6 and now I can't save photos from facebook app?
    Sep 21, 2012 7:05 AM (in response to GimmeCheezburgers)
    Nevermind... figured it out.
    If anyone else runs into the problem, here's the fix:
    Settings > Privacy > Photos > turn facebook to ON

  • My App Store Doesn't Show Any Thing , and not working .

    Today I've Noticed that My App Store Application is Not Working , and even I Can't Click On any Tabs ,and all of menu bar items such as sign out,sign in doesn't work . and doesn't Show Loading Status Bar, and doesn't show any message as you see in this picture :
    I've Tried There Solutions:
    Reset PRAM
    Delete App Store Cache Files
    Signed Out of Itunes And and signed in again
    clear History and web site data in safari
    But Nothing Changed .
    (Sorry My English is Not Good at all , But i'll be thankful if you help me )

    Test after taking each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
    Step 1
    Sign in to the App Store by selecting Sign In from the Store menu. If you're already signed in, sign out and then sign in again.
    Step 2
    Log out or restart the computer.
    Step 3
    Remove or disable "LittleSnitch" or any similar third-party software that blocks outgoing network connections according to the developer's instructions.
    Step 4
    Start up in safe mode and log in to the account with the problem.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    After testing, restart as usual (not in safe mode.)
    Step 5
    If possible, connect to a different network and test.
    Step 6
    There are reports that resetting the PRAM may solve the problem in some cases. I can't confirm.

  • Since updating to OS7 the video app doesn't show any titles for movies I have downloaded on my iPad. Anyone have the same problem or a fix?

    Since updating to OS7 the video app doesn't show any titles for movies I have downloaded on my iPad. Anyone have the same problem or a fix?

    Many users have solved the problem by syncing several times; and if that doesn't work, perform a simple restore. Your titles will come back.

  • Pages doesn't show any page content.

    I have pages 4.0.1, and it doesn't show any page content. How can I solve this?
    Thanks

    Pages 4.0.1 is very old & is likely the cause of your problem. You should be using Pages 4.0.4 in Snow Leopard. iWork '09 installed from the retail disk or from the downloaded trial must be updated through Software Update. If you're not running the latest versions of the iWork apps installed from a retail box or the downloaded trial & Software Update says your software is up to date, make sure the applications are where the installer initially put them. The updaters are very picky. If the location is not where the updater is programmed to look or if the folder doesn't have the name the updater looks for, it will not work. The applications cannot be renamed or moved. If you installed from the downloaded trial or the retail box, they must be in the iWork '09 folder in Applications. That iWork folder must be named iWork '09. If it doesn't have the '09 Software Update won't find them & the updaters won't work.

  • My new iPhone 5 won't connect to iTunes, and when I connect to my computer it comes up as a usb storage device, also in the phone itself under usage it shows internal memory of 2gb and sd card 64 gb, is this an original iPhone or have I been sold a copy

    My new iphone 5 can not connect to itunes, it comes up as a usb storage device when I plug it in, also in the phone under settings/usage it shows internal memory of 2gb and SD card of 64gb, I cannot get it to connect to itunes at all so cannot sync etc, is this a genuine Iphone or a copy. I have owned 4 iphones and never had a problem with connecting to iphones and restoreing to a backup.

    According to http://en.wikipedia.org/wiki/IPhone_5
    the iPhone5 has 1GB of RAM, and internal storage of 16, 32, or 64GB.
    It does not use SD cards.
    Fake iphones are really Android phones using the skin of iOS6.
    Click on the App Store icon. If it takes you to Apple's App Store, then it's a real iPhone.
    But if you are directed to Google Play, then I'm afraid you've gotten a copy.

  • BPEL Console doesn't show any instances created

    Hi,
    We are using file protocol to read the files from trading partner into B2B. File is successfully processes by B2B. I can see that in reports.
    Then I have defined a BPEL process to Dequeue the messages from B2B using AQ Adapter, transforms and places the files in the local file system.
    The BPEL process is simple flow with one receive , transform and invoke activity.
    I have configured AQ adapter using WSIF browser. I can see the deployed document definition in browser.
    I have the TP agreement deployed, BPEL process deployed, but I don't see the 850 file processed. BPEL Console doesn't show any instances created. How would I know where what went wrong?
    Please help.

    Try using java oracle.tip.adapter.b2b.data.IPDequeue to dequeue the message and see if you can dequeue
    Then you'l be able to pin point if the issue is with your BPEL or with B2B Queue's
    Kalyan

Maybe you are looking for