[SOLVED] Thunar permission denied for all partitions excpt arch

Continuing conversion from other thread: https://bbs.archlinux.org/viewtopic.php?id=128639
I made comments #14, #17, #19, & #22 in that thread that are relevant here.
rene wrote:Earlier you said that you DID need to restore the .pacsave files to have things working, whereas you now say differently so I'll refrain from further comment. If you still have problems after removing all the .pkla files and after replacing SLiM with LXDM you have a different problem than the ConsoleKit one, which IS likely the only problem the thread-starter and the others in this thread are having. We should therefore get out of here so that they can get their problem fixed without this thread wandering off into all sorts of directions.
That is true, but a subsequent update broke it.
Here are the updates I made on 11/05 {I might not have logged out/logged in or rebooted after installing the updates on 11/05 before posting to the thread above on that date - or possibly I was in another OS when I posted my first comment on 11/05 in the thread above}
AM M-05-11 2011 05:37:10DT autoconf
AM M-05-11 2011 05:37:10DT automake
AM M-05-11 2011 05:37:10DT bash
AM M-05-11 2011 05:37:11DT ca-certificates
AM M-05-11 2011 05:37:13DT curl
AM M-05-11 2011 05:37:10DT findutils
AM M-05-11 2011 05:37:10DT gawk
AM M-05-11 2011 05:37:13DT gedit
AM M-05-11 2011 05:37:14DT gettext
PM M-05-11 2011 08:45:59DT gksu
AM M-05-11 2011 05:37:14DT grep
AM M-05-11 2011 05:37:13DT gtksourceview3
AM M-05-11 2011 05:37:14DT gzip
PM M-05-11 2011 07:53:20DT intltool
AM M-05-11 2011 05:37:14DT less
AM M-05-11 2011 05:37:15DT lib32-glib2
AM M-05-11 2011 05:37:15DT lib32-libdrm
AM M-05-11 2011 05:37:15DT lib32-libffi
AM M-05-11 2011 05:37:15DT lib32-readline
AM M-05-11 2011 05:37:15DT libdrm
PM M-05-11 2011 07:53:20DT libfm
PM M-05-11 2011 08:45:59DT libgksu
PM M-05-11 2011 08:45:59DT libgtop
AM M-05-11 2011 05:37:15DT libusb
AM M-05-11 2011 05:37:15DT libva
AM M-05-11 2011 05:37:16DT linux-firmware
PM M-05-11 2011 07:53:21DT lxmenu-data
AM M-05-11 2011 05:37:10DT m4
PM M-05-11 2011 07:53:20DT menu-cache
AM M-05-11 2011 05:37:14DT ncurses
AM M-05-11 2011 05:37:16DT patch
AM M-05-11 2011 05:37:16DT pciutils
AM M-05-11 2011 05:37:16DT pkg-config
AM M-05-11 2011 05:37:16DT prelink
AM M-05-11 2011 05:37:10DT sed
AM M-05-11 2011 05:37:16DT sqlite3
AM M-05-11 2011 05:37:16DT tar
AM M-05-11 2011 05:37:17DT thunar
AM M-05-11 2011 05:37:18DT tzdata
AM M-05-11 2011 05:37:18DT which
AM M-05-11 2011 05:37:18DT xfce4-session
Here are the updates I made on 11/06 & 11/07
PM M-06-11 2011 09:57:51ST bison
PM M-07-11 2011 09:31:54ST cryptsetup
PM M-06-11 2011 09:57:51ST db
PM M-06-11 2011 09:57:51ST dialog
PM M-06-11 2011 09:57:51ST expat
PM M-06-11 2011 09:57:51ST flex
PM M-06-11 2011 09:57:51ST gdbm
PM M-06-11 2011 09:57:52ST imagemagick
PM M-07-11 2011 09:31:54ST keyutils
PM M-06-11 2011 09:57:52ST krb5
PM M-06-11 2011 09:57:52ST lib32-libpciaccess
PM M-06-11 2011 09:57:52ST libcap
PM M-07-11 2011 09:31:54ST libdatrie
PM M-06-11 2011 09:57:52ST libldap
PM M-06-11 2011 09:57:52ST libpcap
PM M-06-11 2011 09:57:52ST libpipeline
PM M-07-11 2011 09:31:54ST libthai
PM M-07-11 2011 09:31:54ST module-init-tools
PM M-06-11 2011 09:57:52ST nano
PM M-06-11 2011 09:57:52ST popt
PM M-06-11 2011 09:57:52ST readline
PM M-06-11 2011 09:57:52ST talloc
PM M-06-11 2011 09:57:52ST texinfo
PM M-06-11 2011 09:57:52ST vi
PM M-06-11 2011 09:57:52ST wpa_actiond
PM M-06-11 2011 09:57:52ST wpa_supplicant
PM M-07-11 2011 09:31:54ST xorg-server
PM M-07-11 2011 09:31:54ST xorg-server-common
Around the above dates I installed pcmanfm to try it out, but subsequently uninstalled it. Thunar was still working at the time.
Subsequently (today) I installed gvfs to see if it made any difference, but it did not.
Last edited by David Batson (2011-11-15 01:08:02)

Polkit-gnome was the missing ingredient. With polkit-gnome installed the udisks.pkla file is not required. One difference between the usdisks.pkla fix and the polkit-gnome fix is that you are prompted for root's password to mount the drive. No problem for me there - I prefer it that way.
I did not decipher from the bug report that polkit-gnome was required for thunar in Xfce - only perhaps for thunar in gnome. I wish this had been made more clear in the bug report I filed.
The thunar maintainer for arch wrote: Remove org.freedesktop.udisks.pkla; mounting/unmounting of removable media should continue to function through gvfs. No mention that polkit-gnome was required as well (for all desktops I imagine). I already did have polkit installed - just not polkit-gnome. Polkit was working, just missing some pieces for full functionality.
In the end, I consider it a bug if a dependency is not listed as required or optional.
Package Details: thunar 1.2.3-2
Dependencies (16)
desktop-file-utils
exo
gtk2
hicolor-icon-theme
libexif
libnotify
libpng
libxfce4ui
libxfce4util
udev
gvfs (optional) - for trash support, mounting with udisk and remote filesystems
thunar-archive-plugin (optional) - create and deflate archives
thunar-media-tags-plugin (optional) - view/edit id3/ogg tags
thunar-volman (optional) - manages removable devices
tumbler (optional) - for thumbnail previews
xfce4-panel (optional) - for trash applet
http://www.archlinux.org/packages/extra/x86_64/thunar/
Package Details: gvfs 1.10.1-1
Dependencies (12)
avahi
dconf
fuse
libarchive
libcdio
libgdu
libsoup-gnome
gvfs-afc (optional) - AFC (mobile devices) support
gvfs-afp (optional) - Apple Filing Protocol (AFP) support
gvfs-gphoto2 (optional) - gphoto2 (PTP camera/MTP media player) support
gvfs-obexftp (optional) - ObexFTP (bluetooth) support
gvfs-smb (optional) - SMB/CIFS (Windows client) support
http://www.archlinux.org/packages/extra/x86_64/gvfs/

Similar Messages

Access denied for all (most?) users in all site collections of web app

Hi,
I have a Sharepoint 2010 farm pre-SP1 (yes should be updated!) and for all site collections of a web app, all users are getting access denied.
Now in my title I said "most?" because I have found one user in another office who does not have this issue. This web app/site collections also do not go through f5 or any proxies.
Even if I add myself as a site collection admin via central admin, I get the same result. I've looked at everything, windows time on the server (not using kerberos), errors in event log (nothing), uls logs just say access denied (very helpful!), etc...
I can try what's suggested at http://social.technet.microsoft.com/Forums/en-US/e66f1b09-605d-4546-a581-2a9283c238c0/access-denied-for-all-users-and-for-site-collections-owner?forum=sharepointgeneralprevious but when asking colleagues, there's been no
changes, let alone with those accounts? I can do a get on the property tomorrow to find if there is a value set first, however.
Any suggestions on this?

Hi,
Please try logging in the site with farm account.
If it works, please make sure you have superuser and superreader accounts in CA > Application management > web application policy. If not, please add both accounts with the powershell script in the article below, this can cause all users denied when
access the site:
http://technet.microsoft.com/en-us/library/ff758656.aspx
Here is a similar thread:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/a49b1ab8-273f-41e4-a0b8-be0e31c6733b/all-users-including-site-collection-admins-receiving-access-denied-from-one-site-collection?forum=sharepointadminprevious
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Error: Permission denied for (document.domain has not been set) to call method Location.toString on (document.domain=).

Why am I getting these errors Error: Permission denied for (document.domain has not been set) to call method Location.toString on (document.domain=).
== URL of affected sites ==
http://

HOW DO YOU SET THIS??? I'M FRUSTRATED OVER THIS. ITS BEEN 2 MONTHS SINCE I HAVE BEEN ABLE TO PLAY ANY GAMES IN FACEBOOK DUE TO THIS PROBLEM! IT DOES NOT MATTER WHAT BROWSER I USE I STILL GET THIS SAME MESSAGE.

I get this error msg - Permission denied for to webpage get property XPCComponents.classes

A couple of days ago I started geting the error msg -Permission denied for to <webpage> get property XPCComponents.classes. It happens with every webpage I visit. If I hit the x in the upper righthand corner I can then access the page. This doesn't have in IE. Any ideas how I could fix this and why it started happening?

Try the Firefox SafeMode to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''
If you look in the Error Console for that '''XPCComponents.classes''' error, there should be a '''Source file: chrome://''' address which might give us information related to which extension is causing that message.
Firefox button > Web Developer -> Error Console or just use {Ctrl + Shft + J} from the keyboard

[Solved] Permission denied for imgs in apache home folder

Hi,
I'm getting 403 error when trying to open a captcha image with the browser (generated by codeigniter PHP framework with captcha helper and Tank Auth library) the imgs are created with the http owner with permission "-rw-r--r--" inside a captcha folder
with 777 permissions.
The apache local server is configured to use the documentRoot to a www folder in /home dir with this permissions "drwxr-xr-x"
Have http group and users created like the arch wiki LAMP section.
The httpd.conf is confgured like this:
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/home/lucas/www"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride All
Order deny,allow
Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/home/lucas/www">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
#AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
Last edited by crosssover (2012-09-17 23:20:57)

Here is the log massge
[Sun Sep 16 14:26:47 2012] [error] [client ::1] File does not exist: /home/lucas/www/favicon.ico
[Sun Sep 16 14:26:47 2012] [error] [client ::1] client denied by server configuration: /home/lucas/www/test/application/captcha/1347816281.8856.jpg

[SOLVED] /media permission denied

$sudo mount /dev/sda1 /media
mount: warning: /media seems to be mounted read-only.
$ groups
lp wheel games network video audio optical storage power howard
trying to mount my music hard drive in /media for audacious. it's ntfs and ide if that makes a difference. gives me permission denied pop-up in thunar and in audacious.
not sure where to start exactly.
Last edited by howard (2011-10-20 00:31:58)

jasonwryan wrote:
howard wrote:it's ntfs and ide if that makes a difference
Yes: it does https://wiki.archlinux.org/index.php/Ntfs
Yep!
$sudo ntfs-3g /dev/sda1 /media
Thanks a lot, jason.

Permission denied for root!?

Hey yall--
Something very odd seems to be happening with my file system, such that I am unable to write to certain directories as root. I don't know exactly when this started, but it has to have been within the last month or so--roughly coinciding with when I upgraded to kernel 2.6.15 (or possibly 2.6.14).
Here's some background info:
Some lines from /etc/fstab:
/dev/hda3 / ext2 defaults 0 1
/dev/hda11 /usr reiserfs defaults 0 0
/dev/hda6 /opt reiserfs defaults 0 0
/dev/hda8 /.devel reiserfs defaults 0 0
Output of 'ls -ld' on various directories:
drwxr-xr-x 26 root root 1024 2006-02-19 23:38 /
drwxr-xr-x 89 root root 2352 2006-02-19 23:39 /opt
drwxr-xr-x 40 root root 1128 2006-02-19 23:40 /opt/usr.local
lrwxrwxrwx 1 root root 15 2005-11-08 13:54 /usr/local -> /opt/usr.local/
drwxr-xr-x 2 root root 17192 2006-01-24 14:25 /opt/usr.local/bin
drwxr-xr-x 8 root root 184 2006-02-19 23:40 /.devel
drwxr-xr-x 15 root root 576 2006-02-19 23:46 /.devel/src
drwxr-xr-x 52 root staff 2664 2006-02-19 23:41 /.devel/local.src
lrwxrwxrwx 1 root root 12 2005-11-08 14:00 /usr/src -> /.devel/src/
lrwxrwxrwx 1 root staff 17 2002-08-04 15:36 /usr/local/src -> /.devel/local.src
Yes, my partitioning scheme is a little weird. But it has evolved over several years of trial and error, and it has worked well for me until now. Anyway, here's what happens:
[root@swordfish ~]# mkdir /x
[root@swordfish ~]# rmdir /x
[root@swordfish ~]# mkdir /opt/x
[root@swordfish ~]# rmdir /opt/x
[root@swordfish ~]# mkdir /opt/usr.local/x
[root@swordfish ~]# rmdir /opt/usr.local/x
rmdir: `/opt/usr.local/x': Operation not permitted
[root@swordfish ~]# mkdir /opt/usr.local/bin/x
mkdir: cannot create directory `/opt/usr.local/bin/x': Permission denied
[root@swordfish ~]# mkdir /usr/local/y
[root@swordfish ~]# rmdir /usr/local/y
rmdir: `/usr/local/y': Operation not permitted
[root@swordfish ~]# mkdir /.devel/x
[root@swordfish ~]# rmdir /.devel/x
[root@swordfish ~]# mkdir /.devel/local.src/x
[root@swordfish ~]# rmdir /.devel/local.src/x
[root@swordfish ~]# mkdir /usr/local/src/x
[root@swordfish ~]# rmdir /usr/local/src/x
[root@swordfish ~]# mkdir /.devel/src/x
[root@swordfish ~]# rmdir /.devel/src/x
[root@swordfish ~]# mkdir /usr/src/x
[root@swordfish ~]# rmdir /usr/src/x
So, like, WTF??
I have Googled for some clues on this (though it's a bit hard to figure out good search terms); I did find one or two hits that seemed relevant, but the respondents suggested running fsck on the affected partition. I've done that and found no errors.
So, what else? Something in my UDev configuration, maybe?

I had a problem like that a week or two ago on a reiser partition, though after running fsck.reiserfs it did find errors & fixed them
But before using them make sure you back up
HTH

[SOLVED]ObConf Permission Denied

Hey Guys i am having some trouble to install some openbox themes using obconf, the error is this:
Unable to extract the file "/home/raamon/Downloads/Murrine-Unity-20110222.obt".
Please ensure that "/home/raamon/.themes" is writable and that the file is a valid Openbox theme archive.
The following errors were reported:
tar: Murrine-Unity: Cannot mkdir: Permission denied
tar: Murrine-Unity/openbox-3: Cannot mkdir: No such file or directory
tar: Murrine-Unity: Cannot mkdir: Permission denied
tar: Murrine-Unity/openbox-3/iconify.xbm: Cannot open: No such file or directory
tar: Murrine-Unity: Cannot mkdir: Permission denied
tar: Murrine-Unity/openbox-3/shade.xbm: Cannot open: No such file or directory
tar: Murrine-Unity: Cannot mkdir: Permission denied
tar: Murrine-Unity/openbox-3/desk_toggled.xbm: Cannot open: No such file or directory
tar: Murrine-Unity: Cannot mkdir: Permission denied
tar: Murrine-Unity/openbox-3/max_toggled.xbm: Cannot open: No such file or directory
tar: Murrine-Unity: Cannot mkdir: Permission denied
tar: Murrine-Unity/openbox-3/bullet.xbm: Cannot open: No such file or directory
tar: Murrine-Unity: Cannot mkdir: Permission denied
tar: Murrine-Unity/openbox-3/desk.xbm: Cannot open: No such file or directory
tar: Murrine-Unity: Cannot mkdir: Permission denied
tar: Murrine-Unity/openbox-3/shade_toggled.xbm: Cannot open: No such file or directory
tar: Murrine-Unity: Cannot mkdir: Permission denied
tar: Murrine-Unity/openbox-3/max.xbm: Cannot open: No such file or directory
tar: Murrine-Unity: Cannot mkdir: Permission denied
tar: Murrine-Unity/openbox-3/close.xbm: Cannot open: No such file or directory
tar: Murrine-Unity: Cannot mkdir: Permission denied
tar: Murrine-Unity/openbox-3/themerc: Cannot open: No such file or directory
tar: Exiting with failure status due to previous errors
I tried to move the themes to the ~/.themes and then install by obconf but didn't worked too.
Solved...
Last edited by Arcken (2011-08-08 03:17:19)

Can you please explain how it was solved?

[SOLVED]bash: Permission denied

Hi!
After yesterdays update (pacman -Syu) i can't seem to run scripts or execute commands like
./configure
here is me trying to compile xbmc.
==> Bootstraping XBMC
/home/*****/build/xbmc-pvr-svn/PKGBUILD: ./bootstrap: /bin/sh: felaktig tolk: Åtkomst nekas <--(Permission denied)
==> Configuring XBMC
/home/*****/build/xbmc-pvr-svn/PKGBUILD: ./configure: /bin/sh: felaktig tolk: Åtkomst nekas <--(Permission denied)
==> FEL: Build misslyckades <--(build failed)
Avbryter...
sorry my locale is Swedish.
here is me trying to run script that starts vdr.
./startvdr
bash: ./startvdr: Permission denied
What caused the problem was, my external drives is not auto mounted in Gnome so i used this udev rule
http://wiki.archlinux.org/index.php/Ude … _it_exists
which by the ways works great, after i deleted the udev rule file and rebooted everything is back to normal.
Last edited by decaturguy (2009-12-23 23:26:34)

ZaQ wrote:
Hi,
Maybe the permissions and/or the owner/group changed?
Therefore, you could post:
ls -l /PATH/startvdr
nothing wrong with the permissions:
-rwxr-xr-x 1 myusername users 180 23 feb 2009 startvdr
i can run my scripts like this: bash ./startvdr
but, bash ./configure is no go it get stuck.
configure: WARNING: unrecognized options: --enable-external-libmad, --enable-external-libfaad, --enable-external-libvorbis, --enable-external-libmpcdec, --enable-external-libflac
configure: Ensuring config.guess and config.sub exist and is executable
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for ccache... none
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... configure: error: in `/home/****/build/xbmc-pvr-svn/src/pvr-testing2':
configure: error: cannot run C++ compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details.

Help!!getting Connection Exception &permission denied for my local system

Hi,
I am getting this connect Exception when i am running my RMI program.It is not comming when i am running all the programs[server,client] in my local system.
When i put the server program in the server which is linux server and i am calling it from my local system its giving ConnectException permission denied to 127.0.0.1,no more further infoemation.
These are the programs..
server :
import java.net.*;
import java.rmi.*;
public class AddServer
public static void main(String args[])
     try
     AddServerImpl addServerImpl=new AddServerImpl();
     Naming.rebind("AddServer",addServerImpl);
     catch(Exception e)
     System.out.println("Exception :"+e);
Implement:
import java.rmi.*;
import java.rmi.server.*;
public class AddServerImpl extends UnicastRemoteObject
implements AddServerIntf
public AddServerImpl()throws RemoteException
public double add(double d1,double d2)throws RemoteException
     return d1+d2;
Interface:
import java.rmi.*;
public interface AddServerIntf extends Remote
     double add(double d1,double d2)throws RemoteException;
Client Program :
import java.rmi.*;
import java.rmi.registry.*;
public class AddClient
     public static void main(String args[])
     try
//     String addServerURL="rmi://"+args[0]+"/AddServer";
     Registry r=LocateRegistry.getRegistry("rmi://"+args[0]);
//AddServerIntf addServerIntf=(AddServerIntf)Naming.lookup(addServerURL);
AddServerIntf addServerIntf=(AddServerIntf)r.lookup("AddServer");
System.out.println("The firsrt number is"+args[1]);
double d1 =Double.valueOf(args[1]).doubleValue();
System.out.println("The second number is:"+args[2]);
double d2=Double.valueOf(args[2]).doubleValue();
System.out.println("The sum is:"+addServerIntf.add(d1,d2));
catch(Exception e){
     System.out.println("Exception:"+e);
Plese go thru it and tell what modifications that i have to do with it...
regards,
j.mouli

You can specify a policy file and grant the following pemission in it:
grant {
permission java.net.SocketPermission "*:1024-65535","accept, connect, listen, resolve";
Specify this policy file using "-Djava.security.policy=your policy file".
BTW, don't forget to run rmiregistry before you launch your own RMI application.
Good luck!
Justine

DNS permission denied for vpn clients?

I have an x-serve setup to allow a client access remotely to a local network via VPN. I'm currently having an issue with the DNS server however, which is not allowing me to do lookups when connected via the VPN:
client 10.0.0.130#59551: view com.apple.ServerAdmin.DNS.public: error sending response: permission denied
The DNS server resolves perfectly fine for physical machines on the local network.

Have you added the range of VPN-assigned addresses to the list of clients the DNS server will respond to?
Server Admin -> (server) -> DNS -> Settings -> Accept recursive queries from the following networks
This will have to include the VPN client address range in order for the DNS server to respond to their queries.

[solved] mkv too big for fat32 partition... split, shrink.. ?

I have an mkv file that is larger than the FAT32 limit of my external hard drive. Obviously i would like to keep the 720p quality, so splitting seems to be my best option, but what is the best software to do so?
Last edited by jewnersey (2012-03-06 13:21:26)

jewnersey wrote:
thanks for all the replies.
laughed at the toolbars comment because it is actually what made me buy my first computer. gotta love when your browser window has only 30% useful real estate.
back on topic:
i am using this drive for media with my custom firmware PS3, which has limited NTFS support at the moment, so switching is not my best option at the moment. i found some info about having the ps3 read ntfs but it's currently being a bastard.
Ah, I see. You're not dealing with an IBM compatible PC. In the PS3's case it seems like splitting or resizing are your only options (short of installing a new OS).
FAT32 supports a max file size of 4 gigs. Are you sure you can't simply shrink the file a bit. I assume you're dealing with a movie file (i.e. something with about 1.5-ish hours of content). Most movie files, with 720p resolution, I come across are 1-2 gigs in size. They look and sound just fine on my 35in (90cm) TV screen, so I'd think dropping a (test) file just below 4 gigs is worth a try. All things being equal, the bitrate is a variable to look at.

[SOLVED]getting permission denied

I put this in command line
/mnt/EFI/boot /dev/sda1 vfat rw,flush,tz=UTC
I'm getting a permission error
Last edited by tmccaffery (2013-04-04 10:04:40)

The only part of the page you referenced - that I can find pertaining to the bizarre command you wrote - is the section describing how you'd find the device path for the UEFI System Partition. If that's the case you need to make sure you read the guides very carefully, as (in that specific use case) the command is thus;
# findmnt /boot/efi
Minus the # of course, as this is to denote that you are logged in as root.
The command you say you wrote into the terminal is in fact the type of output you'd expect from writing the aforementioned command. Having said all this, if you're writing nonsense to the terminal expecting results I think you should start from scratch, or at least double check what it is that you wish to achieve, as that section is for gummiboot which now has its own installer.

How to fix permission denied for home folder with Apache in Mavericks?

I recently activated the apache that ships with OS X Mavericks. I followed some tutorial to set up the web-server, however. When I browse to my home-filter at http://localhost/~nazeem, I get the following error: You don't have permission to access /~nazeem/ on this server.
Installation steps
To set up the webserver, I took the following steps:
1. activated the webserver with command: apachectl start
2. enabled PHP by checking if the module is loaded
3. checked if the home folder module is loaded
4. made the user based configuration file, in /etc/apache2/users/nazeem.conf The content is as follows:
<Directory "/Users/nazeem/Development/Websites/">
Options Indexes MultiViews FollowSymLinks AllowOverride All
</Directory>
Permissions
~/nazeem : drwxr-xr-x+ ~/nazeem/Development : drwxr-xr-x ~/nazeem/Development/Websites : drwxr-xr-x
Log
The apache log says the following:
[Mon May 19 21:22:57 2014] [error] [client ::1] client denied by server configuration: /Users/nazeem/Sites
In my opinion this is remarkable, as the path /Users/nazeem/Sites is nog what I defined in my user configuration.
Versions
OS X Mavericks 10.9.3
Apache 2.2.26
Does anybody know how to solve this?

nzm_aak wrote:
I recently activated the apache that ships with OS X Mavericks. I followed some tutorial to set up the web-server, however. When I browse to my home-filter at http://localhost/~nazeem, I get the following error: You don't have permission to access /~nazeem/ on this server.
Does anybody know how to solve this?
You will have to contact the author of that tutorial and ask. Apache can be configured an infinite number of ways. You seem to be attempting to configure it in two conflicting methods. You can define specific directories on your web server or you can use mod_userdir. You can't hack up a combination of the two.
I posted my own User Tip on how to configure Apache: https://discussions.apple.com/docs/DOC-3083
This user tip only covers mod_userdir and will serve content out of $(HOME)/Sites. I strongly suggest starting there and only trying a custom location later, if you see the need.

Syncing forced fsck runs at system boot for all partitions

I know how to change the interval (number of mounts) that fsck uses to force a check. What I'd like to know is how I can get all my partitions to be in sync with each other? In other words, my (/) partition is queued to get checked at the next boot. /home is in queue for 2 boots, /var isn't on the list. I'd like all three of these to be in sync'ed such that all three will get checked together. Ideas?

You could use the -C option in tune2fs to set the mount-count:
tune2fs -C 0 /dev/sda1
Check the result with:
dumpe2fs /dev/sda1 | more
If you set the same mount-count and the same max-mount-counts on all volumes I guess they should be checked at the same time.

[SOLVED] Thunar permission denied for all partitions excpt arch

Similar Messages

Maybe you are looking for