[SOLVED] Transparent Minecraft screen
Hello, I've been having issues with my graphics for Minecraft lately. Ever since the upgrade to Mesa 10 and above along with the Intel drivers that go along with it, I have had a major transparency bug with Minecraft. I've included some screenshots below on imgur.
I'm running a system(Dell Inspiron N5110) with:
Intel i5-2450m (2.5GHz at 2 cores)
6 GB RAM
Intel HD Graphics 3000 (integrated graphics)
My system is currently up to date, and I also did a reinstall yesterday(I had the issue beforehand too, I just downgraded to mesa and all required libraries to 9.2.4 - the last version that didn't happen with this - I just want to get it fixed and run on latest versions now). Minecraft is completely up to date(1.7.5). Doesn't matter what launcher I use either.
http://imgur.com/a/a9Wl6
Last edited by logangorence (2014-03-31 21:29:58)
Thank you for pointing me towards that post, I had not seen that one while searching. All I found was old posts that didn't lead me anywhere.
Edit: Issue solved, close if you'd like.
Last edited by logangorence (2014-03-31 21:30:19)
Similar Messages
-
Randomly, the transparent gray screen appears and displays the message to restart holding down the restart button. Once I do so everything works fine again. This usually happens once a day. I tried the Hardware Test and everything is find. My iBook has OSX 10.3.9. Does anyone have any suggestions? Thank you!
You're welcome.
Thankfully most KPs are easily solved. If you have additional RAM I would remove it first and see if that's the cause. Because your KP's are ramdom the Hardware Test disc will probably not find a problem with the RAM.
John -
I am not able to access my photos through the photo application... when I click on the photo app, I can see the camera roll, but a transparent "album" screen is over it and I cannot click on the photos to see it... can any one please help ???
Known bug. Quit the Camera App, double-tap the home key and delete Camera from the recent apps bar. Fire it up again, should be good.
-
Transparent splash screen in VB6.0
how to make a transparent splash screen in VB6.0?
how to make a transparent splash screen in VB6.0?
Hi,
I would remind you that VB6 issues are not supported in these forums any more, you could refer to the following thread:
Where to post your VB 6 questions
You could consider posting this issue in these forums below:
These forums do not support Visual Basic 6, however there are many third-party support sites that do. If you have a VB6-related question please visit these popular forums:
VB Forums
VB City
Thanks for your understanding.
In addition, you could also mark any reply as answer which is helpful.
And VB6 is not supported in these IDEs since VS2003, so if you just want to use the IDE to use VB.Net then you could download the Visual Studio from
http://www.visualstudio.com/downloads/download-visual-studio-vs by choosing the one fits your requirements. And here are the resources to get start about VB.net:
http://msdn.microsoft.com/en-us/vstudio/hh388573
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
[SOLVED] Closing Minecraft turns screen black
Minecraft itself runs fine but when i exit it or window it from fullscreen my display turns black (except the cursor). Switching to tty1 and then back to 7 fixes the problem but i'd prefer not do that.
Im using mate and openjdk6 with the catalyst driver using a radeon HD 7690m gpu.
Any help would be appreciated
EDIT: I should also note that this hasn't always happened. It only started happening yesterday
Last edited by BennyBolton (2012-09-26 23:37:26)I have installed openjdk7 but am still experiencing the same issues. I should also note that this doesn't happen with any of the other games i have (darkplaces, quake 2, quake 3, etc)
My entire screen goes black, even if i have minecraft as a window
Last edited by BennyBolton (2012-09-18 06:14:09) -
Hello,
I was searching google for a quite long time to fix this problem - no solution found.
Minecraft used to blink in light blue colour, but now it doesnt or does very rary, but I can live with that.
Now it blinks, not very quickly, despite fullscreen or not, it is annoying actually. its like black screen for ~20ms and about every second. If I stand still in the game - it doesnt. (or a bit, but basically not blinking). Also doesnt blink in menu at all.
Some useful information:
KDE 4.0, installed both 32bit (lib) and 64bit gpu drivers, laptop: Asus N550JV, "disable effects for fullscreen applications" is checked in settings.so, basically I solved this problem, but not really.... anyway, It works 100% without problems, so lemme explain what I have done and maybe you will have the idea (but not the actual solution)
I am the beginner at arch linux, still haven't mastered it yet. I love it. I didn't know much about bumblebee so I installed without it. I used arch linux for about 1 week, but I decided to reinstall it - create regular user, avoid errors which I currently had and set up gpu drivers properly.
minecraft worked fine after fresh install, until after some time after using primusrun I started to have lags. the best thing I have done so far was - installed openbox (but I still daily use KDE). Openbox only for gaming. Install it, configure menu, configure new xbindkeys file for volume changing and thats it! fullscreen games like minecraft or borderlands 2 work absolutelly FINE on openbox in fullscreen mode. on login screen manager (I use KDM) you can choose whether you want to load KDE or openbox.
Use openbox for gaming - the best performance, a very basic graphical interface lets you run programs without suppressing/modifying/changing any effects/applications with full performance speed, not like KDE - "suspend effects for fullscreen applications" and blablabla.....
BTW I use "primusrun java -jar minecraftLauncher.jar", but actually, I use "optiprime" to avoid lag delay in minecraft (check it here: http://askubuntu.com/a/321595)
Last edited by erkexzcx (2014-10-16 14:31:20) -
[Solved] Startx black screen on nvidia macbook
startx goes to a black screen, Xorg.0.log doesn't report anything unusual (that I noticed). I've been using arch for a few years, but this is my first install on a mac, and my knowledge is rather thin in places, so I apologize if I'm missing something obvious. any help would be appreciated. here's my log. I have nvidia graphics
btw this is the first time I've ever posted, (although these forums have helped me tremendously over the years)
[ 608.040]
X.Org X Server 1.14.4
Release Date: 2013-10-31
[ 608.043] X Protocol Version 11, Revision 0
[ 608.043] Build Operating System: Linux 3.11.6-1-ARCH x86_64
[ 608.044] Current Operating System: Linux Quixote 3.12.1-1-ARCH #1 SMP PREEMPT Thu Nov 21 08:18:42 CET 2013 x86_64
[ 608.044] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=78c7995e-65e8-48b9-aa92-cd0a6a7ad1d1 rw quiet rootflags=data=writeback
[ 608.046] Build Date: 01 November 2013 05:10:48PM
[ 608.047]
[ 608.048] Current version of pixman: 0.32.4
[ 608.050] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 608.050] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 608.054] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 26 15:32:02 2013
[ 608.090] (==) Using config file: "/etc/X11/xorg.conf"
[ 608.091] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 608.120] (==) ServerLayout "Layout0"
[ 608.120] (**) |-->Screen "Screen0" (0)
[ 608.120] (**) | |-->Monitor "Monitor0"
[ 608.120] (**) | |-->Device "Device0"
[ 608.120] (**) |-->Input Device "Keyboard0"
[ 608.120] (**) |-->Input Device "Mouse0"
[ 608.120] (**) Option "DontZap" "False"
[ 608.120] (==) Automatically adding devices
[ 608.120] (==) Automatically enabling devices
[ 608.120] (==) Automatically adding GPU devices
[ 608.161] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 608.161] Entry deleted from font path.
[ 608.161] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 608.161] Entry deleted from font path.
[ 608.161] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 608.161] Entry deleted from font path.
[ 608.161] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 608.161] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 608.161] Entry deleted from font path.
[ 608.161] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 608.161] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 608.161] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 608.161] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 608.161] (WW) Disabling Keyboard0
[ 608.161] (WW) Disabling Mouse0
[ 608.161] (II) Loader magic: 0x7fdc20
[ 608.161] (II) Module ABI versions:
[ 608.161] X.Org ANSI C Emulation: 0.4
[ 608.161] X.Org Video Driver: 14.1
[ 608.161] X.Org XInput driver : 19.1
[ 608.161] X.Org Server Extension : 7.0
[ 608.161] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 608.164] (--) PCI:*(0:4:0:0) 10de:08a0:106b:00c2 rev 162, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00001000/128, BIOS @ 0x????????/131072
[ 608.165] Initializing built-in extension Generic Event Extension
[ 608.166] Initializing built-in extension SHAPE
[ 608.167] Initializing built-in extension MIT-SHM
[ 608.168] Initializing built-in extension XInputExtension
[ 608.169] Initializing built-in extension XTEST
[ 608.170] Initializing built-in extension BIG-REQUESTS
[ 608.171] Initializing built-in extension SYNC
[ 608.172] Initializing built-in extension XKEYBOARD
[ 608.173] Initializing built-in extension XC-MISC
[ 608.175] Initializing built-in extension SECURITY
[ 608.176] Initializing built-in extension XINERAMA
[ 608.177] Initializing built-in extension XFIXES
[ 608.178] Initializing built-in extension RENDER
[ 608.179] Initializing built-in extension RANDR
[ 608.180] Initializing built-in extension COMPOSITE
[ 608.181] Initializing built-in extension DAMAGE
[ 608.182] Initializing built-in extension MIT-SCREEN-SAVER
[ 608.183] Initializing built-in extension DOUBLE-BUFFER
[ 608.184] Initializing built-in extension RECORD
[ 608.185] Initializing built-in extension DPMS
[ 608.186] Initializing built-in extension X-Resource
[ 608.187] Initializing built-in extension XVideo
[ 608.188] Initializing built-in extension XVideo-MotionCompensation
[ 608.189] Initializing built-in extension XFree86-VidModeExtension
[ 608.190] Initializing built-in extension XFree86-DGA
[ 608.191] Initializing built-in extension XFree86-DRI
[ 608.192] Initializing built-in extension DRI2
[ 608.192] (II) LoadModule: "glx"
[ 608.219] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 609.006] (II) Module glx: vendor="NVIDIA Corporation"
[ 609.006] compiled for 4.0.2, module version = 1.0.0
[ 609.006] Module class: X.Org Server Extension
[ 609.006] (II) NVIDIA GLX Module 331.20 Wed Oct 30 17:36:48 PDT 2013
[ 609.022] Loading extension GLX
[ 609.022] (II) LoadModule: "nvidia"
[ 609.062] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 609.149] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 609.149] compiled for 4.0.2, module version = 1.0.0
[ 609.149] Module class: X.Org Video Driver
[ 609.158] (II) NVIDIA dlloader X Driver 331.20 Wed Oct 30 17:16:53 PDT 2013
[ 609.158] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 609.159] (++) using VT number 1
[ 609.171] (II) Loading sub module "fb"
[ 609.171] (II) LoadModule: "fb"
[ 609.171] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 609.190] (II) Module fb: vendor="X.Org Foundation"
[ 609.191] compiled for 1.14.4, module version = 1.0.0
[ 609.191] ABI class: X.Org ANSI C Emulation, version 0.4
[ 609.191] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 609.191] (II) Loading sub module "wfb"
[ 609.191] (II) LoadModule: "wfb"
[ 609.191] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 609.193] (II) Module wfb: vendor="X.Org Foundation"
[ 609.193] compiled for 1.14.4, module version = 1.0.0
[ 609.193] ABI class: X.Org ANSI C Emulation, version 0.4
[ 609.193] (II) Loading sub module "ramdac"
[ 609.193] (II) LoadModule: "ramdac"
[ 609.193] (II) Module "ramdac" already built-in
[ 609.214] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 609.214] (==) NVIDIA(0): RGB weight 888
[ 609.214] (==) NVIDIA(0): Default visual is TrueColor
[ 609.214] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 609.215] (**) NVIDIA(0): Enabling 2D acceleration
*Edit* Never mind, just switched to nouveau drivers, everything's fine now. marking as solved!
Last edited by Lawless Flogic (2013-11-27 00:31:28)startx goes to a black screen, Xorg.0.log doesn't report anything unusual (that I noticed). I've been using arch for a few years, but this is my first install on a mac, and my knowledge is rather thin in places, so I apologize if I'm missing something obvious. any help would be appreciated. here's my log. I have nvidia graphics
btw this is the first time I've ever posted, (although these forums have helped me tremendously over the years)
[ 608.040]
X.Org X Server 1.14.4
Release Date: 2013-10-31
[ 608.043] X Protocol Version 11, Revision 0
[ 608.043] Build Operating System: Linux 3.11.6-1-ARCH x86_64
[ 608.044] Current Operating System: Linux Quixote 3.12.1-1-ARCH #1 SMP PREEMPT Thu Nov 21 08:18:42 CET 2013 x86_64
[ 608.044] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=78c7995e-65e8-48b9-aa92-cd0a6a7ad1d1 rw quiet rootflags=data=writeback
[ 608.046] Build Date: 01 November 2013 05:10:48PM
[ 608.047]
[ 608.048] Current version of pixman: 0.32.4
[ 608.050] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 608.050] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 608.054] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 26 15:32:02 2013
[ 608.090] (==) Using config file: "/etc/X11/xorg.conf"
[ 608.091] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 608.120] (==) ServerLayout "Layout0"
[ 608.120] (**) |-->Screen "Screen0" (0)
[ 608.120] (**) | |-->Monitor "Monitor0"
[ 608.120] (**) | |-->Device "Device0"
[ 608.120] (**) |-->Input Device "Keyboard0"
[ 608.120] (**) |-->Input Device "Mouse0"
[ 608.120] (**) Option "DontZap" "False"
[ 608.120] (==) Automatically adding devices
[ 608.120] (==) Automatically enabling devices
[ 608.120] (==) Automatically adding GPU devices
[ 608.161] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 608.161] Entry deleted from font path.
[ 608.161] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 608.161] Entry deleted from font path.
[ 608.161] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 608.161] Entry deleted from font path.
[ 608.161] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 608.161] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 608.161] Entry deleted from font path.
[ 608.161] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 608.161] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 608.161] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 608.161] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 608.161] (WW) Disabling Keyboard0
[ 608.161] (WW) Disabling Mouse0
[ 608.161] (II) Loader magic: 0x7fdc20
[ 608.161] (II) Module ABI versions:
[ 608.161] X.Org ANSI C Emulation: 0.4
[ 608.161] X.Org Video Driver: 14.1
[ 608.161] X.Org XInput driver : 19.1
[ 608.161] X.Org Server Extension : 7.0
[ 608.161] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 608.164] (--) PCI:*(0:4:0:0) 10de:08a0:106b:00c2 rev 162, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00001000/128, BIOS @ 0x????????/131072
[ 608.165] Initializing built-in extension Generic Event Extension
[ 608.166] Initializing built-in extension SHAPE
[ 608.167] Initializing built-in extension MIT-SHM
[ 608.168] Initializing built-in extension XInputExtension
[ 608.169] Initializing built-in extension XTEST
[ 608.170] Initializing built-in extension BIG-REQUESTS
[ 608.171] Initializing built-in extension SYNC
[ 608.172] Initializing built-in extension XKEYBOARD
[ 608.173] Initializing built-in extension XC-MISC
[ 608.175] Initializing built-in extension SECURITY
[ 608.176] Initializing built-in extension XINERAMA
[ 608.177] Initializing built-in extension XFIXES
[ 608.178] Initializing built-in extension RENDER
[ 608.179] Initializing built-in extension RANDR
[ 608.180] Initializing built-in extension COMPOSITE
[ 608.181] Initializing built-in extension DAMAGE
[ 608.182] Initializing built-in extension MIT-SCREEN-SAVER
[ 608.183] Initializing built-in extension DOUBLE-BUFFER
[ 608.184] Initializing built-in extension RECORD
[ 608.185] Initializing built-in extension DPMS
[ 608.186] Initializing built-in extension X-Resource
[ 608.187] Initializing built-in extension XVideo
[ 608.188] Initializing built-in extension XVideo-MotionCompensation
[ 608.189] Initializing built-in extension XFree86-VidModeExtension
[ 608.190] Initializing built-in extension XFree86-DGA
[ 608.191] Initializing built-in extension XFree86-DRI
[ 608.192] Initializing built-in extension DRI2
[ 608.192] (II) LoadModule: "glx"
[ 608.219] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 609.006] (II) Module glx: vendor="NVIDIA Corporation"
[ 609.006] compiled for 4.0.2, module version = 1.0.0
[ 609.006] Module class: X.Org Server Extension
[ 609.006] (II) NVIDIA GLX Module 331.20 Wed Oct 30 17:36:48 PDT 2013
[ 609.022] Loading extension GLX
[ 609.022] (II) LoadModule: "nvidia"
[ 609.062] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 609.149] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 609.149] compiled for 4.0.2, module version = 1.0.0
[ 609.149] Module class: X.Org Video Driver
[ 609.158] (II) NVIDIA dlloader X Driver 331.20 Wed Oct 30 17:16:53 PDT 2013
[ 609.158] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 609.159] (++) using VT number 1
[ 609.171] (II) Loading sub module "fb"
[ 609.171] (II) LoadModule: "fb"
[ 609.171] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 609.190] (II) Module fb: vendor="X.Org Foundation"
[ 609.191] compiled for 1.14.4, module version = 1.0.0
[ 609.191] ABI class: X.Org ANSI C Emulation, version 0.4
[ 609.191] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 609.191] (II) Loading sub module "wfb"
[ 609.191] (II) LoadModule: "wfb"
[ 609.191] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 609.193] (II) Module wfb: vendor="X.Org Foundation"
[ 609.193] compiled for 1.14.4, module version = 1.0.0
[ 609.193] ABI class: X.Org ANSI C Emulation, version 0.4
[ 609.193] (II) Loading sub module "ramdac"
[ 609.193] (II) LoadModule: "ramdac"
[ 609.193] (II) Module "ramdac" already built-in
[ 609.214] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 609.214] (==) NVIDIA(0): RGB weight 888
[ 609.214] (==) NVIDIA(0): Default visual is TrueColor
[ 609.214] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 609.215] (**) NVIDIA(0): Enabling 2D acceleration
*Edit* Never mind, just switched to nouveau drivers, everything's fine now. marking as solved!
Last edited by Lawless Flogic (2013-11-27 00:31:28) -
[SOLVED] Compositing causes screen to freeze in KDE 4.7 with Nouveau
Hello,
since the upgrade to KDE 4.7 screen gets [partial] freezes for several seconds (differs) especialy when some repainting is to be done (scrolling in Rekonq/KWrite, opening and closing tabs in Rekonq, playing video in KDE). Usually I can stil see moving the mouse, though the cursor doesn't change on links etc. Also repainting of plasma widgets freezes.
I'm using nouvea driver for 7600 GS video card:
multilib/lib32-nouveau-dri 7.11-1
extra/nouveau-dri 7.11-1
extra/nouveau-firmware 20091212-4
extra/xf86-video-nouveau 0.0.16_git20110726-1
And get foloving in dmesg after a freeze:
[43244.176746] [drm] nouveau 0000:04:00.0: vm flush timeout: 0x00000022
and in xorg.log:
[ 43235.667] [mi] EQ overflowing. The server is probably stuck in an infinite loop.
Everything is ok with disabled compositing, or with nvidia driver, thogh I do not prefer to use it since it lacks KMS and is proprietary.
Any idea which splendid new feature of KDE 4.7 causes this? And how to turn it off so I can use compositing again? I tried diasbling new GL 2.0 shaders and setting worser filter in advanced Plasma settings but it didn't help.
I'll happily provide more info, if I am pointed which one.
Thank you.
Last edited by Nicky726 (2011-08-13 10:20:57)3-D is currently an unsupported use-at-your-own-risk feature in nouveau. That leads me to conclude that neither project (kwin or nouveau) can be blamed at the moment.
I had irrecoverable freezes (had to ssh in and reboot) on my 9800 GT while playing videos fullscreen. Turning off the option to disable 3-D for full screen applications solved that problem for me. Compared to that, I'm okay with the temporary one-second freezes (which I see as well).
Your best bet is to play around and isolate which effects cause the issues for you. Start with no desktop effects checked and work your way up, adding one effect at a time. Maybe you'll discover the culprit that way. Hope that helps. -
[SOLVED][KDE, intel] Screen goes gray when switching windows
Hello,
on my EEE netbook, since the xorg update, I guess --noticed today, as I use it for school only --, the screen goes gray after I switch windows via alt+tab. This does not happen every time, but eventually it occures. In that case the whole screen has color of not yet painted window, and the DE is seemingly not responding to anything, I can still move my mose though and cursor moves too. Switching to text console works, but xserver restart is needed to get things back to normal.
I have been using graphics system raster, but change to default didn't solved the issue. The same goes for -lcd font filters. System is up-to-date and uses some SELinux packages from the AUR if that matters, but it should not, as they are not graphics nor DE related.
Would you have any sugestions? I should not be doing any potentially risky operations till thursday, as I need the computer for school and don't have any other available.
Thank you.
Will happily provide additional information, if you specify it.
EDIT: The situation is simmilar as when I run a program, first a fullscreen window is painted gray, and when everything is loaded its content is painted. This lasts few second in case of big applications like Kontact. In the case of mentioned bug it is like the content of window never painted.
EDIT: So I recompiled bespin-svn, as I remembered, that this package likes to cause trobles, when it is older, and I wanted to mark this solved, as it behaved during the day, but just few minutes ago, the problem happend again.
EDIT: I don't understand it. On monday it happed several times during day. On tuesday it happend once. Since wednesday it didn't happend. Sould I start to beleave in ghosts?
Last edited by Nicky726 (2010-12-09 16:02:37)Ok, happend again several times today. Didn't happen at any other PC, but I do not have other Intel based, in case it is graphics related.
As for log (not like I have an idea what to look for) I have error loading fbdev module and some touchpad errors in xorg.log (not imediatelly after the problem), and some Networkmanager warnings.
Damn. Now I failed three times in a row to switch from konsole to rekonq in order to copy those logs. Anyway this is tail -n 50 everything.log (right now X11 screen is just gray and mouse cursor). SELinux can be ignored as it is set permissive.
Oct 13 20:39:46 localhost kernel: ata3.00: configured for UDMA/133
Oct 13 20:39:46 localhost kernel: ata3: EH complete
Oct 13 20:39:46 localhost kernel: EXT4-fs (dm-3): re-mounted. Opts: commit=0
Oct 13 20:39:46 localhost kernel: EXT4-fs (dm-5): re-mounted. Opts: commit=0
Oct 13 20:39:46 localhost kernel: type=1400 audit(1286995186.522:24): avc: denied { execstack } for pid=16129 comm="ksmserver" scontext=user_u:user_r:insmod_t tcontext=user_u:user_r:insmod_t tclass=process
Oct 13 20:39:46 localhost kernel: EXT4-fs (dm-2): re-mounted. Opts: commit=0
Oct 13 20:39:46 localhost kernel: EXT4-fs (dm-4): re-mounted. Opts: commit=0
Oct 13 20:39:47 localhost NetworkManager[22388]: <warn> invalid connection: 'NMSettingWireless' / 'mac-address' invalid: 1
Oct 13 20:39:47 localhost NetworkManager[22388]: <warn> invalid connection: 'NMSettingWireless' / 'mac-address' invalid: 1
Oct 13 20:39:53 localhost kernel: composite sync not supported
Oct 13 20:39:54 localhost kernel: SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
Oct 13 20:39:54 localhost kernel: type=1401 audit(1286995194.036:25): security_compute_sid: invalid context user_u:user_r:mount_t for scontext=user_u:user_r:insmod_t tcontext=system_u:object_r:mount_exec_t tclass=process
Oct 13 20:39:54 localhost kernel: type=1400 audit(1286995194.036:26): avc: denied { read write } for pid=16308 comm="mount" path="socket:[1171927]" dev=sockfs ino=1171927 scontext=user_u:user_r:mount_t tcontext=user_u:user_r:insmod_t tclass=unix_stream_socket
Oct 13 20:39:54 localhost kernel: type=1400 audit(1286995194.036:27): avc: denied { read write } for pid=16308 comm="mount" path="/dev/fuse" dev=devtmpfs ino=4086 scontext=user_u:user_r:mount_t tcontext=system_u:object_r:fuse_device_t tclass=chr_file
Oct 13 20:39:54 localhost kernel: type=1400 audit(1286995194.039:28): avc: denied { append } for pid=16308 comm="mount" name="mtab" dev=dm-3 ino=37749 scontext=user_u:user_r:mount_t tcontext=system_u:object_r:etc_t tclass=file
Oct 13 20:39:56 localhost kernel: type=1400 audit(1286995196.412:29): avc: denied { execmod } for pid=16256 comm="knotify4" path="/usr/lib/codecs/drvc.so" dev=dm-3 ino=828208 scontext=user_u:user_r:insmod_t tcontext=system_u:object_r:lib_t tclass=file
Oct 13 20:39:59 localhost kernel: type=1400 audit(1286995199.259:30): avc: denied { execmod } for pid=16256 comm="knotify4" path="/usr/lib/libx264.so.104" dev=dm-3 ino=16190 scontext=user_u:user_r:insmod_t tcontext=user_u:object_r:lib_t tclass=file
Oct 13 20:42:02 localhost dhcpcd[22391]: eth0: renewing lease of 192.168.1.200
Oct 13 20:42:02 localhost dhcpcd[22391]: eth0: acknowledged 192.168.1.200 from 192.168.1.254 `router'
Oct 13 20:42:02 localhost dhcpcd[22391]: eth0: leased 192.168.1.200 for 300 seconds
Oct 13 20:43:09 localhost kernel: type=1401 audit(1286995389.304:31): security_compute_sid: invalid context user_u:user_r:mount_t for scontext=user_u:user_r:insmod_t tcontext=system_u:object_r:mount_exec_t tclass=process
Oct 13 20:43:12 localhost kdm[3254]: X server for display :0 terminated unexpectedly
Oct 13 20:43:12 localhost acpid: client 15799[0:0] has disconnected
Oct 13 20:43:12 localhost acpid: client connected from 20364[0:0]
Oct 13 20:43:12 localhost acpid: 1 client rule loaded
Oct 13 20:43:13 localhost kernel: composite sync not supported
Oct 13 20:43:13 localhost kernel: composite sync not supported
Oct 13 20:43:20 localhost kernel: ata3.00: configured for UDMA/133
Oct 13 20:43:20 localhost kernel: ata3: EH complete
Oct 13 20:43:20 localhost kernel: EXT4-fs (dm-3): re-mounted. Opts: commit=0
Oct 13 20:43:21 localhost kernel: EXT4-fs (dm-5): re-mounted. Opts: commit=0
Oct 13 20:43:21 localhost kernel: EXT4-fs (dm-2): re-mounted. Opts: commit=0
Oct 13 20:43:22 localhost kernel: EXT4-fs (dm-4): re-mounted. Opts: commit=0
Oct 13 20:43:22 localhost NetworkManager[22388]: <warn> invalid connection: 'NMSettingWireless' / 'mac-address' invalid: 1
Oct 13 20:43:22 localhost NetworkManager[22388]: <warn> invalid connection: 'NMSettingWireless' / 'mac-address' invalid: 1
Oct 13 20:43:24 localhost kernel: SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
Oct 13 20:43:24 localhost kernel: type=1401 audit(1286995404.994:32): security_compute_sid: invalid context user_u:user_r:mount_t for scontext=user_u:user_r:insmod_t tcontext=system_u:object_r:mount_exec_t tclass=process
Oct 13 20:43:25 localhost kernel: type=1400 audit(1286995405.008:33): avc: denied { write } for pid=20701 comm="mount" name="mtab" dev=dm-3 ino=37746 scontext=user_u:user_r:mount_t tcontext=system_u:object_r:etc_t tclass=file
Oct 13 20:43:25 localhost kernel: type=1400 audit(1286995405.008:34): avc: denied { append } for pid=20701 comm="mount" name="mtab" dev=dm-3 ino=37746 scontext=user_u:user_r:mount_t tcontext=system_u:object_r:etc_t tclass=file
Oct 13 20:43:25 localhost kernel: composite sync not supported
Oct 13 20:44:32 localhost dhcpcd[22391]: eth0: renewing lease of 192.168.1.200
Oct 13 20:44:32 localhost dhcpcd[22391]: eth0: acknowledged 192.168.1.200 from 192.168.1.254 `router'
Oct 13 20:44:32 localhost dhcpcd[22391]: eth0: leased 192.168.1.200 for 300 seconds
Oct 13 20:45:44 localhost ntpd[22509]: skew change 53.711 exceeds limit
Oct 13 20:47:02 localhost dhcpcd[22391]: eth0: renewing lease of 192.168.1.200
Oct 13 20:47:02 localhost dhcpcd[22391]: eth0: acknowledged 192.168.1.200 from 192.168.1.254 `router'
Oct 13 20:47:02 localhost dhcpcd[22391]: eth0: leased 192.168.1.200 for 300 seconds
Oct 13 20:49:32 localhost dhcpcd[22391]: eth0: renewing lease of 192.168.1.200
Oct 13 20:49:32 localhost dhcpcd[22391]: eth0: acknowledged 192.168.1.200 from 192.168.1.254 `router'
Oct 13 20:49:32 localhost dhcpcd[22391]: eth0: leased 192.168.1.200 for 300 seconds
This should cover the time of at least one of the failures. Can somebody see something in it?
Last edited by Nicky726 (2010-10-13 18:58:16) -
Downgrading to 7.0.1 did not solve the white screen issue.
Hello -
A little background - in early January, with a thesis presentation due, I delayed upgrading to Quicktime 7.0.4 until after the thesis - this was a good idea, because now after upgrading and downgrading again, I've got problems.
I made a video with Final Cut Pro - (assume I can no longer go back and output it again) and have the file as a .mov. Before upgrading, thesis era, I threw it into iDVD and got a DVD.
NOW I need to make more copies of the DVD so I go about re-creating the dvd in iDVD with the exact same files... and the video comes up blank. both in quicktime AND in iDVD.
I downgraded from 7.0.4 to 7.0.1 - but that did not solve the problem completely... sure, I get my audio back now, but the film is entirely white-screen...
I'm under a massive time deadline to make more copies of the DVD and I'm at a loss os what to do! Please help!!
I'm already deleted the receipts, downgraded from 7.0.4 -> 7.0.1... no fix.
tried going back to 7.0.3 from 7.0.1... no fix.
went BACK to 7.0.1 again.... no fix...
HELP!!!! t
thanksThere's a good chance that you're doing something unusual and risky with JavaScript. For us to figure out the problem you would need to allow us to use your web app and tell us where it is.
Given the tags you're using you understand tech talk and rathr than posting to 'iPad in Business and Education' you're better off posting in a developer forum. You could try the public one that's part of this list
https://discussions.apple.com/community/developer_forums
or the more private ones which are part of developer.apple.com, for which you need a developer account. -
[Solved] Catalyst + Minecraft: system freeze.
Hi everyone,
I bought a new graphics card: the ATI HD 7750 (7700 Series, Cape Verde) and installed catalyst-total from the [catalyst] repo, because the 3D performance with xf86-video-ati-git was incredible poor. I wasn't even able to scroll in chromium with this.
Now with proprietary fglrx everything performs buttery smooth, except I get severe troubles running 3D games.
The only one I'd miss very much is Minecraft, but also there I always encounter a system freeze after 5 seconds. Only S-Abf + B can help me get out of there, I cannot switch to tty1-6 to fix this issue.
Here's my Xorg.0.log
[ 15.054]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 15.054] X Protocol Version 11, Revision 0
[ 15.054] Build Operating System: Linux 3.4.8-1-ARCH x86_64
[ 15.054] Current Operating System: Linux hubert 3.5.3-1-ARCH #1 SMP PREEMPT Sun Aug 26 09:14:51 CEST 2012 x86_64
[ 15.054] Kernel command line: locale=de_DE.UTF-8 lang=de cryptdevice=/dev/sda2:vgroup root=/dev/mapper/vgroup-root nomodeset ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
[ 15.054] Build Date: 27 August 2012 08:04:39AM
[ 15.054]
[ 15.054] Current version of pixman: 0.26.2
[ 15.054] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 15.054] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 15.054] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 1 11:22:33 2012
[ 15.056] (==) Using config file: "/etc/X11/xorg.conf"
[ 15.056] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 15.058] (==) ServerLayout "aticonfig Layout"
[ 15.058] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 15.058] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 15.060] (**) | |-->Device "aticonfig-Device[0]-0"
[ 15.060] (==) Automatically adding devices
[ 15.060] (==) Automatically enabling devices
[ 15.062] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 15.063] Entry deleted from font path.
[ 15.065] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 15.065] Entry deleted from font path.
[ 15.065] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 15.065] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 15.065] Entry deleted from font path.
[ 15.065] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 15.065] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 15.065] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 15.065] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 15.065] (II) Loader magic: 0x7c8b00
[ 15.065] (II) Module ABI versions:
[ 15.065] X.Org ANSI C Emulation: 0.4
[ 15.065] X.Org Video Driver: 12.1
[ 15.065] X.Org XInput driver : 16.0
[ 15.065] X.Org Server Extension : 6.0
[ 15.067] (--) PCI:*(0:1:0:0) 1002:683f:174b:e213 rev 0, Mem @ 0xd0000000/268435456, 0xfeac0000/262144, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[ 15.067] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 15.067] (II) "extmod" will be loaded by default.
[ 15.067] (II) "dbe" will be loaded by default.
[ 15.067] (II) "glx" will be loaded by default.
[ 15.067] (II) "record" will be loaded by default.
[ 15.067] (II) "dri" will be loaded by default.
[ 15.067] (II) "dri2" will be loaded by default.
[ 15.067] (II) LoadModule: "extmod"
[ 15.073] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 15.076] (II) Module extmod: vendor="X.Org Foundation"
[ 15.076] compiled for 1.12.4, module version = 1.0.0
[ 15.076] Module class: X.Org Server Extension
[ 15.076] ABI class: X.Org Server Extension, version 6.0
[ 15.076] (II) Loading extension MIT-SCREEN-SAVER
[ 15.076] (II) Loading extension XFree86-VidModeExtension
[ 15.076] (II) Loading extension XFree86-DGA
[ 15.076] (II) Loading extension DPMS
[ 15.076] (II) Loading extension XVideo
[ 15.076] (II) Loading extension XVideo-MotionCompensation
[ 15.076] (II) Loading extension X-Resource
[ 15.076] (II) LoadModule: "dbe"
[ 15.076] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 15.078] (II) Module dbe: vendor="X.Org Foundation"
[ 15.078] compiled for 1.12.4, module version = 1.0.0
[ 15.078] Module class: X.Org Server Extension
[ 15.078] ABI class: X.Org Server Extension, version 6.0
[ 15.078] (II) Loading extension DOUBLE-BUFFER
[ 15.078] (II) LoadModule: "glx"
[ 15.078] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 15.088] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 15.088] compiled for 6.9.0, module version = 1.0.0
[ 15.088] (II) Loading extension GLX
[ 15.088] (II) LoadModule: "record"
[ 15.088] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 15.090] (II) Module record: vendor="X.Org Foundation"
[ 15.090] compiled for 1.12.4, module version = 1.13.0
[ 15.090] Module class: X.Org Server Extension
[ 15.090] ABI class: X.Org Server Extension, version 6.0
[ 15.090] (II) Loading extension RECORD
[ 15.090] (II) LoadModule: "dri"
[ 15.090] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 15.095] (II) Module dri: vendor="X.Org Foundation"
[ 15.095] compiled for 1.12.4, module version = 1.0.0
[ 15.095] ABI class: X.Org Server Extension, version 6.0
[ 15.095] (II) Loading extension XFree86-DRI
[ 15.095] (II) LoadModule: "dri2"
[ 15.095] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 15.097] (II) Module dri2: vendor="X.Org Foundation"
[ 15.097] compiled for 1.12.4, module version = 1.2.0
[ 15.097] ABI class: X.Org Server Extension, version 6.0
[ 15.097] (II) Loading extension DRI2
[ 15.097] (II) LoadModule: "fglrx"
[ 15.101] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 15.229] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 15.229] compiled for 1.4.99.906, module version = 8.98.2
[ 15.229] Module class: X.Org Video Driver
[ 15.230] (II) Loading sub module "fglrxdrm"
[ 15.230] (II) LoadModule: "fglrxdrm"
[ 15.230] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 15.234] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 15.234] compiled for 1.4.99.906, module version = 8.98.2
[ 15.234] (II) AMD Proprietary Linux Driver Version Identifier:8.98.2
[ 15.234] (II) AMD Proprietary Linux Driver Release Identifier: 8.982
[ 15.234] (II) AMD Proprietary Linux Driver Build Date: Jul 27 2012 20:37:56
[ 15.234] (++) using VT number 7
[ 15.236] (WW) Falling back to old probe method for fglrx
[ 15.269] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 15.276] (--) Chipset Supported AMD Graphics Processor (0x683F) found
[ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found
[ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found
[ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
[ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
[ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 15.282] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 15.283] (II) AMD Video driver is signed
[ 15.283] (II) fglrx(0): pEnt->device->identifier=0xb0c260
[ 15.283] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
[ 15.284] (II) Loading sub module "vgahw"
[ 15.284] (II) LoadModule: "vgahw"
[ 15.284] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 15.286] (II) Module vgahw: vendor="X.Org Foundation"
[ 15.286] compiled for 1.12.4, module version = 0.1.0
[ 15.286] ABI class: X.Org Video Driver, version 12.1
[ 15.286] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 15.286] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 15.286] (==) fglrx(0): Default visual is TrueColor
[ 15.286] (**) fglrx(0): Option "DPMS" "true"
[ 15.286] (==) fglrx(0): RGB weight 888
[ 15.286] (II) fglrx(0): Using 8 bits per RGB
[ 15.287] (==) fglrx(0): Buffer Tiling is ON
[ 15.289] (II) Loading sub module "fglrxdrm"
[ 15.289] (II) LoadModule: "fglrxdrm"
[ 15.290] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 15.290] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 15.290] compiled for 1.4.99.906, module version = 8.98.2
[ 15.293] ukiDynamicMajor: found major device number 250
[ 15.293] ukiDynamicMajor: found major device number 250
[ 15.293] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 15.293] ukiOpenDevice: node name is /dev/ati/card0
[ 15.293] ukiOpenDevice: open result is 11, (OK)
[ 15.293] ukiOpenByBusid: ukiOpenMinor returns 11
[ 15.293] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 15.294] (**) fglrx(0): NoAccel = NO
[ 15.294] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 15.294] (--) fglrx(0): Chipset: "AMD Radeon HD 7700 Series " (Chipset = 0x683f)
[ 15.294] (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe213)
[ 15.294] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 15.294] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 15.294] (--) fglrx(0): MMIO registers at 0xfeac0000
[ 15.294] (--) fglrx(0): I/O port at 0x0000d000
[ 15.294] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 15.323] (II) fglrx(0): AC Adapter is used
[ 15.346] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 15.462] (II) Loading sub module "vbe"
[ 15.462] (II) LoadModule: "vbe"
[ 15.462] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 15.464] (II) Module vbe: vendor="X.Org Foundation"
[ 15.464] compiled for 1.12.4, module version = 1.1.0
[ 15.464] ABI class: X.Org Video Driver, version 12.1
[ 15.467] (II) fglrx(0): VESA BIOS detected
[ 15.467] (II) fglrx(0): VESA VBE Version 3.0
[ 15.467] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 15.467] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[ 15.467] (II) fglrx(0): VESA VBE OEM Software Rev: 15.14
[ 15.467] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
[ 15.467] (II) fglrx(0): VESA VBE OEM Product: VERDE
[ 15.467] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 15.475] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 15.475] (--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
[ 15.475] (II) fglrx(0): PCIE card detected
[ 15.475] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 15.475] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 15.479] (II) fglrx(0): Using adapter: 1:0.0.
[ 15.489] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x40000000)
[ 15.496] (II) fglrx(0): Interrupt handler installed at IRQ 44.
[ 15.496] (II) fglrx(0): RandR 1.2 support is enabled!
[ 15.496] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 15.496] (==) fglrx(0): Center Mode is disabled
[ 15.496] (II) Loading sub module "fb"
[ 15.496] (II) LoadModule: "fb"
[ 15.496] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 15.501] (II) Module fb: vendor="X.Org Foundation"
[ 15.501] compiled for 1.12.4, module version = 1.0.0
[ 15.501] ABI class: X.Org ANSI C Emulation, version 0.4
[ 15.501] (II) Loading sub module "ddc"
[ 15.501] (II) LoadModule: "ddc"
[ 15.501] (II) Module "ddc" already built-in
[ 15.652] (II) fglrx(0): Finished Initialize PPLIB!
[ 15.658] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 15.658] (II) fglrx(0): Output DFP2 has no monitor section
[ 15.658] (II) fglrx(0): Output DFP3 has no monitor section
[ 15.658] (II) fglrx(0): Output DFP4 has no monitor section
[ 15.658] (II) fglrx(0): Output DFP5 has no monitor section
[ 15.658] (II) fglrx(0): Output DFP6 has no monitor section
[ 15.658] (II) fglrx(0): Output CRT1 has no monitor section
[ 15.658] (II) Loading sub module "ddc"
[ 15.658] (II) LoadModule: "ddc"
[ 15.658] (II) Module "ddc" already built-in
[ 15.658] (II) fglrx(0): Connected Display0: DFP6
[ 15.658] (II) fglrx(0): Display0 EDID data ---------------------------
[ 15.658] (II) fglrx(0): Manufacturer: ENC Model: 1975 Serial#: 16843009
[ 15.658] (II) fglrx(0): Year: 2010 Week: 16
[ 15.658] (II) fglrx(0): EDID Version: 1.3
[ 15.658] (II) fglrx(0): Digital Display Input
[ 15.658] (II) fglrx(0): Max Image Size [cm]: horiz.: 48 vert.: 30
[ 15.658] (II) fglrx(0): Gamma: 2.20
[ 15.658] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[ 15.658] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 15.659] (II) fglrx(0): First detailed timing is preferred mode
[ 15.659] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 15.659] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 15.659] (II) fglrx(0): Supported established timings:
[ 15.659] (II) fglrx(0): 720x400@70Hz
[ 15.659] (II) fglrx(0): 640x480@60Hz
[ 15.659] (II) fglrx(0): 800x600@60Hz
[ 15.659] (II) fglrx(0): 1024x768@60Hz
[ 15.659] (II) fglrx(0): Manufacturer's mask: 0
[ 15.659] (II) fglrx(0): Supported standard timings:
[ 15.659] (II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 15.659] (II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 15.659] (II) fglrx(0): Supported detailed timing:
[ 15.659] (II) fglrx(0): clock: 119.0 MHz Image Size: 474 x 297 mm
[ 15.659] (II) fglrx(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
[ 15.659] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
[ 15.659] (II) fglrx(0): Serial No: 98458040
[ 15.659] (II) fglrx(0): Ranges: V min: 59 V max: 61 Hz, H min: 31 H max: 65 kHz, PixClock max 125 MHz
[ 15.659] (II) fglrx(0): Monitor name: S2202W
[ 15.659] (II) fglrx(0): EDID (in hex):
[ 15.659] (II) fglrx(0): 00ffffffffffff0015c3751901010101
[ 15.659] (II) fglrx(0): 1014010380301e78eaee95a3544c9926
[ 15.659] (II) fglrx(0): 0f5054a1080081808140010101010101
[ 15.659] (II) fglrx(0): 0101010101017c2e90a0601a1e403020
[ 15.659] (II) fglrx(0): 3600da291100001a000000ff00393834
[ 15.659] (II) fglrx(0): 35383034300a20202020000000fd003b
[ 15.659] (II) fglrx(0): 3d1f410c000a202020202020000000fc
[ 15.659] (II) fglrx(0): 005332323032570a202020202020001f
[ 15.659] (II) fglrx(0): End of Display0 EDID data --------------------
[ 15.660] (II) fglrx(0): EDID for output DFP1
[ 15.660] (II) fglrx(0): EDID for output DFP2
[ 15.660] (II) fglrx(0): EDID for output DFP3
[ 15.660] (II) fglrx(0): EDID for output DFP4
[ 15.660] (II) fglrx(0): EDID for output DFP5
[ 15.660] (II) fglrx(0): EDID for output DFP6
[ 15.660] (II) fglrx(0): Manufacturer: ENC Model: 1975 Serial#: 16843009
[ 15.660] (II) fglrx(0): Year: 2010 Week: 16
[ 15.660] (II) fglrx(0): EDID Version: 1.3
[ 15.660] (II) fglrx(0): Digital Display Input
[ 15.660] (II) fglrx(0): Max Image Size [cm]: horiz.: 48 vert.: 30
[ 15.660] (II) fglrx(0): Gamma: 2.20
[ 15.660] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[ 15.660] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 15.660] (II) fglrx(0): First detailed timing is preferred mode
[ 15.660] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 15.660] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 15.660] (II) fglrx(0): Supported established timings:
[ 15.660] (II) fglrx(0): 720x400@70Hz
[ 15.660] (II) fglrx(0): 640x480@60Hz
[ 15.660] (II) fglrx(0): 800x600@60Hz
[ 15.660] (II) fglrx(0): 1024x768@60Hz
[ 15.660] (II) fglrx(0): Manufacturer's mask: 0
[ 15.660] (II) fglrx(0): Supported standard timings:
[ 15.660] (II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 15.660] (II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 15.660] (II) fglrx(0): Supported detailed timing:
[ 15.660] (II) fglrx(0): clock: 119.0 MHz Image Size: 474 x 297 mm
[ 15.660] (II) fglrx(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
[ 15.660] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
[ 15.660] (II) fglrx(0): Serial No: 98458040
[ 15.660] (II) fglrx(0): Ranges: V min: 59 V max: 61 Hz, H min: 31 H max: 65 kHz, PixClock max 125 MHz
[ 15.660] (II) fglrx(0): Monitor name: S2202W
[ 15.660] (II) fglrx(0): EDID (in hex):
[ 15.660] (II) fglrx(0): 00ffffffffffff0015c3751901010101
[ 15.660] (II) fglrx(0): 1014010380301e78eaee95a3544c9926
[ 15.660] (II) fglrx(0): 0f5054a1080081808140010101010101
[ 15.660] (II) fglrx(0): 0101010101017c2e90a0601a1e403020
[ 15.660] (II) fglrx(0): 3600da291100001a000000ff00393834
[ 15.660] (II) fglrx(0): 35383034300a20202020000000fd003b
[ 15.660] (II) fglrx(0): 3d1f410c000a202020202020000000fc
[ 15.660] (II) fglrx(0): 005332323032570a202020202020001f
[ 15.660] (II) fglrx(0): Printing probed modes for output DFP6
[ 15.660] (II) fglrx(0): Modeline "1680x1050"x60.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 15.660] (II) fglrx(0): Modeline "1400x1050"x60.0 119.00 1400 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 15.660] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 15.660] (II) fglrx(0): Modeline "1440x900"x60.0 119.00 1440 1728 1760 1840 900 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 15.660] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 15.660] (II) fglrx(0): Modeline "1280x800"x60.0 108.00 1280 1376 1488 1800 800 961 964 1000 +hsync +vsync (60.0 kHz)
[ 15.660] (II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1376 1488 1800 768 961 964 1000 +hsync +vsync (60.0 kHz)
[ 15.660] (II) fglrx(0): Modeline "1280x720"x60.0 108.00 1280 1376 1488 1800 720 961 964 1000 +hsync +vsync (60.0 kHz)
[ 15.660] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 15.660] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 15.660] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 15.660] (II) fglrx(0): EDID for output CRT1
[ 15.660] (II) fglrx(0): Output DFP1 disconnected
[ 15.660] (II) fglrx(0): Output DFP2 disconnected
[ 15.660] (II) fglrx(0): Output DFP3 disconnected
[ 15.660] (II) fglrx(0): Output DFP4 disconnected
[ 15.660] (II) fglrx(0): Output DFP5 disconnected
[ 15.660] (II) fglrx(0): Output DFP6 connected
[ 15.660] (II) fglrx(0): Output CRT1 disconnected
[ 15.660] (II) fglrx(0): Using exact sizes for initial modes
[ 15.660] (II) fglrx(0): Output DFP6 using initial mode 1680x1050
[ 15.661] (II) fglrx(0): DPI set to (96, 96)
[ 15.661] (II) fglrx(0): Eyefinity capable adapter detected.
[ 15.661] (II) fglrx(0): Adapter AMD Radeon HD 7700 Series has 6 configurable heads and 1 displays connected.
[ 15.661] (==) fglrx(0): PseudoColor visuals disabled
[ 15.661] (II) Loading sub module "ramdac"
[ 15.661] (II) LoadModule: "ramdac"
[ 15.661] (II) Module "ramdac" already built-in
[ 15.661] (==) fglrx(0): NoDRI = NO
[ 15.661] (==) fglrx(0): Capabilities: 0x00000000
[ 15.661] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 15.661] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 15.661] (==) fglrx(0): UseFastTLS=0
[ 15.661] (--) Depth 24 pixmap format is 32 bpp
[ 15.661] (II) Loading extension ATIFGLRXDRI
[ 15.661] (II) fglrx(0): doing swlDriScreenInit
[ 15.661] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 15.661] ukiDynamicMajor: found major device number 250
[ 15.661] ukiDynamicMajor: found major device number 250
[ 15.661] ukiDynamicMajor: found major device number 250
[ 15.661] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 15.661] ukiOpenDevice: node name is /dev/ati/card0
[ 15.661] ukiOpenDevice: open result is 12, (OK)
[ 15.661] ukiOpenByBusid: ukiOpenMinor returns 12
[ 15.661] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 15.661] (II) fglrx(0): [uki] DRM interface version 1.0
[ 15.661] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 15.661] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 15.661] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f509aba4000
[ 15.661] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 15.661] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 15.661] (II) fglrx(0): swlDriScreenInit done
[ 15.661] (II) fglrx(0): Kernel Module Version Information:
[ 15.661] (II) fglrx(0): Name: fglrx
[ 15.661] (II) fglrx(0): Version: 8.98.2
[ 15.661] (II) fglrx(0): Date: Jul 27 2012
[ 15.661] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 15.661] (II) fglrx(0): Kernel Module version matches driver.
[ 15.661] (II) fglrx(0): Kernel Module Build Time Information:
[ 15.661] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.5.3-1-ARCH
[ 15.661] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 15.661] (II) fglrx(0): Build-Kernel __SMP__: no
[ 15.661] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 15.662] (II) fglrx(0): [uki] register handle = 0x00004000
[ 15.684] (II) fglrx(0): DRI initialization successfull
[ 15.688] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x01008000
[ 15.698] (==) fglrx(0): Backing store disabled
[ 15.698] (II) Loading extension FGLRXEXTENSION
[ 15.698] (**) fglrx(0): DPMS enabled
[ 15.698] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 15.698] (**) fglrx(0): Textured Video is enabled.
[ 15.698] (II) LoadModule: "glesx"
[ 15.698] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 15.750] (II) Module glesx: vendor="X.Org Foundation"
[ 15.751] compiled for 1.4.99.906, module version = 1.0.0
[ 15.751] (II) Loading extension GLESX
[ 15.751] (II) fglrx(0): GLESX enableFlags = 592
[ 15.753] (II) fglrx(0): GLESX is enabled
[ 15.753] (II) LoadModule: "amdxmm"
[ 15.753] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 15.758] (II) Module amdxmm: vendor="X.Org Foundation"
[ 15.758] compiled for 1.4.99.906, module version = 2.0.0
[ 15.773] (II) Loading extension AMDXVOPL
[ 15.773] (II) Loading extension AMDXVBA
[ 15.778] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 15.784] (II) fglrx(0): Enable composite support successfully
[ 15.784] (WW) fglrx(0): Option "VendorName" is not used
[ 15.784] (WW) fglrx(0): Option "ModelName" is not used
[ 15.784] (II) fglrx(0): X context handle = 0x1
[ 15.784] (II) fglrx(0): [DRI] installation complete
[ 15.785] (==) fglrx(0): Silken mouse enabled
[ 15.785] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 15.786] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 15.909] (II) fglrx(0): Framebuffer compression enabled: mcAddr=0xf40b9e0000 width=0xa00 height=0x1900
[ 15.909] (--) RandR disabled
[ 15.909] (II) Initializing built-in extension Generic Event Extension
[ 15.909] (II) Initializing built-in extension SHAPE
[ 15.909] (II) Initializing built-in extension MIT-SHM
[ 15.909] (II) Initializing built-in extension XInputExtension
[ 15.909] (II) Initializing built-in extension XTEST
[ 15.909] (II) Initializing built-in extension BIG-REQUESTS
[ 15.909] (II) Initializing built-in extension SYNC
[ 15.909] (II) Initializing built-in extension XKEYBOARD
[ 15.909] (II) Initializing built-in extension XC-MISC
[ 15.909] (II) Initializing built-in extension SECURITY
[ 15.909] (II) Initializing built-in extension XINERAMA
[ 15.909] (II) Initializing built-in extension XFIXES
[ 15.909] (II) Initializing built-in extension RENDER
[ 15.909] (II) Initializing built-in extension RANDR
[ 15.909] (II) Initializing built-in extension COMPOSITE
[ 15.909] (II) Initializing built-in extension DAMAGE
[ 15.911] ukiDynamicMajor: found major device number 250
[ 15.911] ukiDynamicMajor: found major device number 250
[ 15.911] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 15.911] ukiOpenDevice: node name is /dev/ati/card0
[ 15.911] ukiOpenDevice: open result is 13, (OK)
[ 15.911] ukiOpenByBusid: ukiOpenMinor returns 13
[ 15.911] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 16.449] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 16.547] (II) fglrx(0): Enable the clock gating!
[ 16.547] (II) fglrx(0): Setting screen physical size to 444 x 277
[ 16.715] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 16.715] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.715] (II) LoadModule: "evdev"
[ 16.715] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 16.719] (II) Module evdev: vendor="X.Org Foundation"
[ 16.719] compiled for 1.12.3.901, module version = 2.7.3
[ 16.719] Module class: X.Org XInput Driver
[ 16.719] ABI class: X.Org XInput driver, version 16.0
[ 16.719] (II) Using input driver 'evdev' for 'Power Button'
[ 16.719] (**) Power Button: always reports core events
[ 16.720] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 16.720] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.720] (--) evdev: Power Button: Found keys
[ 16.720] (II) evdev: Power Button: Configuring as keyboard
[ 16.720] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 16.720] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 16.720] (**) Option "xkb_rules" "evdev"
[ 16.720] (**) Option "xkb_model" "evdev"
[ 16.720] (**) Option "xkb_layout" "us"
[ 16.772] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 16.772] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.772] (II) Using input driver 'evdev' for 'Power Button'
[ 16.772] (**) Power Button: always reports core events
[ 16.772] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 16.772] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.772] (--) evdev: Power Button: Found keys
[ 16.772] (II) evdev: Power Button: Configuring as keyboard
[ 16.772] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[ 16.772] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 16.772] (**) Option "xkb_rules" "evdev"
[ 16.772] (**) Option "xkb_model" "evdev"
[ 16.772] (**) Option "xkb_layout" "us"
[ 16.773] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event14)
[ 16.773] (II) No input driver specified, ignoring this device.
[ 16.773] (II) This device may have been added with another device file.
[ 16.774] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event15)
[ 16.774] (II) No input driver specified, ignoring this device.
[ 16.774] (II) This device may have been added with another device file.
[ 16.775] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event16)
[ 16.775] (II) No input driver specified, ignoring this device.
[ 16.775] (II) This device may have been added with another device file.
[ 16.775] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event17)
[ 16.775] (II) No input driver specified, ignoring this device.
[ 16.775] (II) This device may have been added with another device file.
[ 16.776] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event18)
[ 16.776] (II) No input driver specified, ignoring this device.
[ 16.776] (II) This device may have been added with another device file.
[ 16.776] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event19)
[ 16.776] (II) No input driver specified, ignoring this device.
[ 16.776] (II) This device may have been added with another device file.
[ 16.776] (II) config/udev: Adding input device USB Keyboard (/dev/input/event0)
[ 16.776] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 16.776] (II) Using input driver 'evdev' for ' USB Keyboard'
[ 16.776] (**) USB Keyboard: always reports core events
[ 16.776] (**) evdev: USB Keyboard: Device: "/dev/input/event0"
[ 16.776] (--) evdev: USB Keyboard: Vendor 0x1241 Product 0x1603
[ 16.776] (--) evdev: USB Keyboard: Found keys
[ 16.776] (II) evdev: USB Keyboard: Configuring as keyboard
[ 16.777] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input0/event0"
[ 16.777] (II) XINPUT: Adding extended input device " USB Keyboard" (type: KEYBOARD, id 8)
[ 16.777] (**) Option "xkb_rules" "evdev"
[ 16.777] (**) Option "xkb_model" "evdev"
[ 16.777] (**) Option "xkb_layout" "us"
[ 16.777] (II) config/udev: Adding input device USB Keyboard (/dev/input/event1)
[ 16.777] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 16.777] (II) Using input driver 'evdev' for ' USB Keyboard'
[ 16.777] (**) USB Keyboard: always reports core events
[ 16.777] (**) evdev: USB Keyboard: Device: "/dev/input/event1"
[ 16.777] (--) evdev: USB Keyboard: Vendor 0x1241 Product 0x1603
[ 16.777] (--) evdev: USB Keyboard: Found keys
[ 16.777] (II) evdev: USB Keyboard: Configuring as keyboard
[ 16.777] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/input/input1/event1"
[ 16.777] (II) XINPUT: Adding extended input device " USB Keyboard" (type: KEYBOARD, id 9)
[ 16.777] (**) Option "xkb_rules" "evdev"
[ 16.777] (**) Option "xkb_model" "evdev"
[ 16.777] (**) Option "xkb_layout" "us"
[ 16.777] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event2)
[ 16.777] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 16.777] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[ 16.777] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 16.777] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event2"
[ 16.777] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc01e
[ 16.777] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
[ 16.777] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 16.777] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
[ 16.777] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[ 16.777] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[ 16.777] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[ 16.778] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 16.778] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 16.778] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/input/input2/event2"
[ 16.778] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 10)
[ 16.778] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[ 16.778] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[ 16.778] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 16.778] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 16.778] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 16.778] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[ 16.778] (II) No input driver specified, ignoring this device.
[ 16.778] (II) This device may have been added with another device file.
[ 16.778] (II) config/udev: Adding input device UVC Camera (046d:09a4) (/dev/input/event20)
[ 16.778] (**) UVC Camera (046d:09a4): Applying InputClass "evdev keyboard catchall"
[ 16.778] (II) Using input driver 'evdev' for 'UVC Camera (046d:09a4)'
[ 16.778] (**) UVC Camera (046d:09a4): always reports core events
[ 16.778] (**) evdev: UVC Camera (046d:09a4): Device: "/dev/input/event20"
[ 16.778] (--) evdev: UVC Camera (046d:09a4): Vendor 0x46d Product 0x9a4
[ 16.778] (--) evdev: UVC Camera (046d:09a4): Found keys
[ 16.778] (II) evdev: UVC Camera (046d:09a4): Configuring as keyboard
[ 16.778] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input20/event20"
[ 16.778] (II) XINPUT: Adding extended input device "UVC Camera (046d:09a4)" (type: KEYBOARD, id 11)
[ 16.778] (**) Option "xkb_rules" "evdev"
[ 16.778] (**) Option "xkb_model" "evdev"
[ 16.778] (**) Option "xkb_layout" "us"
[ 16.779] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event10)
[ 16.779] (II) No input driver specified, ignoring this device.
[ 16.779] (II) This device may have been added with another device file.
[ 16.779] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event11)
[ 16.779] (II) No input driver specified, ignoring this device.
[ 16.779] (II) This device may have been added with another device file.
[ 16.779] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event12)
[ 16.779] (II) No input driver specified, ignoring this device.
[ 16.779] (II) This device may have been added with another device file.
[ 16.779] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event13)
[ 16.779] (II) No input driver specified, ignoring this device.
[ 16.779] (II) This device may have been added with another device file.
[ 16.779] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event6)
[ 16.779] (II) No input driver specified, ignoring this device.
[ 16.779] (II) This device may have been added with another device file.
[ 16.779] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event7)
[ 16.779] (II) No input driver specified, ignoring this device.
[ 16.779] (II) This device may have been added with another device file.
[ 16.780] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event8)
[ 16.780] (II) No input driver specified, ignoring this device.
[ 16.780] (II) This device may have been added with another device file.
[ 16.780] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event9)
[ 16.780] (II) No input driver specified, ignoring this device.
[ 16.780] (II) This device may have been added with another device file.
[ 16.780] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 16.780] (II) No input driver specified, ignoring this device.
[ 16.780] (II) This device may have been added with another device file.
[ 16.782] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 16.786] (II) fglrx(0): EDID vendor "ENC", prod id 6517
[ 16.786] (II) fglrx(0): Using EDID range info for horizontal sync
[ 16.786] (II) fglrx(0): Using EDID range info for vertical refresh
[ 16.786] (II) fglrx(0): Printing DDC gathered Modelines:
[ 16.786] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
[ 16.786] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 16.786] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 16.786] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 16.786] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 16.786] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 16.786] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 18.696] (II) fglrx(0): EDID vendor "ENC", prod id 6517
[ 18.696] (II) fglrx(0): Using hsync ranges from config file
[ 18.696] (II) fglrx(0): Using vrefresh ranges from config file
[ 18.696] (II) fglrx(0): Printing DDC gathered Modelines:
[ 18.696] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
[ 18.696] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 18.696] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 18.696] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 18.696] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 18.696] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 18.696] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 19.844] (II) fglrx(0): EDID vendor "ENC", prod id 6517
[ 19.844] (II) fglrx(0): Using hsync ranges from config file
[ 19.844] (II) fglrx(0): Using vrefresh ranges from config file
[ 19.844] (II) fglrx(0): Printing DDC gathered Modelines:
[ 19.844] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
[ 19.844] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 19.844] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 19.844] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 19.844] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 19.844] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 19.844] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
I can't see anything suspicious, hopefully someone of you knows better.
At last my xorg.conf :
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Help and hints how to continue from here would be highly appreciated.
EDIT: By the way, I tried lots of things from the wiki. https://wiki.archlinux.org/index.php/Catalyst.
But there was one point I could't figure out how to implement:
The radeonfb framebuffer drivers have been known in the past to cause problems of this nature. If your kernel has radeonfb support compiled in, you may want to try a different kernel and see if this helps.
How can I disable radeonfb?
EDIT2: Well, almost 2 years later the open source driver is good enough to handle Minecraft and others very easily. Closed.
Last edited by Duxon (2014-07-10 21:31:02)I read the open source drivers for the Southern Island Cards have been improved, but aren't ready for 3d accelerated use yet.
http://thread.gmane.org/gmane.comp.vide … evel/45138
Therefore users of the 7700 series have to stick to catalyst and I still have no idea what the cause of the freeze is. Can anyone help? -
[SOLVED] Agh my screen is melting!
Alright, so i've had linux running on my Sony VGN-S460 laptop for about 8 months now, gone from ubuntu to arch and settled here.
Now since the very beginning (ubuntu) every time I have rebooted, shutdown or changed the terminal window (with alt+F* buttons) my screen blanks then literally looks like it melting.
I cant see any sort of output while its doing this, and as far as I know everyhting else is running cleanly - I havent had any problems or anything, suspend to RAM and Disk work fine, it seems harmless (my screen hasnt degraded either) and honestly it looks pretty damn cool.
now the problem is I want to use the other virtual terminals, and see my shutdown logs (if there are any.... I still dont know)
the only idea I have is that the video drivers are for whatever reason cutting the power to my monitor... google hasnt helped me and I've been trying to figure out what is going on since day 1
anyone had this problem and fixed it, any ideas?I had this issue, and solved it.
See my topic here: http://bbs.archlinux.org/viewtopic.php?id=63551 -
Solved the Minecraft flicker issue
SOLVED!
Was having an issue with the intel HD4600 graphics driver flickering every time my son played minecraft. Got a hold of a wonderful HP support guy in India and he and I worked it out.
1. Uninstall the Intel 4600 Driver fom device manager
2. Uninstall java
3. Increase the virtual memory on your computer as much as you can
4. reboot
5. from device manager on the graphics card do the "check for updates" or "update driver". Follow the process until it updates to the intel 4600 from the microsoft standard display adapter (what is interesting is that when it did this on my new pc, it acutally rolled back the driver to a previous version, NOT the version that shipped when I received the PC)
6. Reboot
7. reinstall java
8. reboot
9. Click minecraft and play.
Hope you avoid the time wasted that I had before I finally got through to a real technician in India.
Also you should know that the text "chat" support from HP is horrible. The person there told me that minecraft was just incompatible with my pc. Which obviously it isnt, as my son is now playing it flicker-free.SOLVED!
Was having an issue with the intel HD4600 graphics driver flickering every time my son played minecraft. Got a hold of a wonderful HP support guy in India and he and I worked it out.
1. Uninstall the Intel 4600 Driver fom device manager
2. Uninstall java
3. Increase the virtual memory on your computer as much as you can
4. reboot
5. from device manager on the graphics card do the "check for updates" or "update driver". Follow the process until it updates to the intel 4600 from the microsoft standard display adapter (what is interesting is that when it did this on my new pc, it acutally rolled back the driver to a previous version, NOT the version that shipped when I received the PC)
6. Reboot
7. reinstall java
8. reboot
9. Click minecraft and play.
Hope you avoid the time wasted that I had before I finally got through to a real technician in India.
Also you should know that the text "chat" support from HP is horrible. The person there told me that minecraft was just incompatible with my pc. Which obviously it isnt, as my son is now playing it flicker-free. -
[SOLVED] freeze (black screen) during boot
When booting, after I can choose between Arch and Arch Fallback, the console messages are still huge (resolution not yet fit to screen). That's the output of scripts run on boot, if I understand it right. Then, the screen turns black for a second when the screen resolution is increased, and then the colored stuff comes, e.g. the Daemons (network etc.).
Now sometimes, the screen just remains black when the screen resolution is increased. Nothing happens anymore, then, and I have to force reboot holding the power button. Most times, booting works on second try, sometimes it needs more tries (but eventually, it always boots just fine).
I'm running up-to-date Arch on a MacBook4 dualboot (rEFIt boots first, and from there, Arch is loaded by Grub). That's all system information I can provide right know, since I don't know much about what happens at boot, and there doesn't seem to be a boot logfile on Arch.
It's not a really fatal problem because, as mentionned, Arch eventually boots just fine every time after some tries; but it's really, really annoying because otherwise, my Arch runs rock stable (all crashes are window manager, i.e. gnome3, related...).
Last edited by cryptkeeper (2012-06-12 14:38:10)I finally solved the problem, as it seems for good because I haven't had a single freeze on boot anymore since I did this.
What I did is to set up an "early KMS start", described here: https://wiki.archlinux.org/index.php/KM … _KMS_start . I stumbled into this when I was googling for a solution, thought: why not give it a try?, and it works!!
Last edited by cryptkeeper (2012-06-12 14:48:03) -
[SOLVED] GNOME login screen freezes after 3 seconds
Hello,
today I installed Arch-Linux the first time. I had some issues during the installation (following https://wiki.archlinux.de/title/Anleitu … Einsteiger (its the german version, seems to differ a little from the english version)), but everything went good until I installed GNOME. Now the login screen freezes everytime after quite exactly 3 seconds, unless I press [strg]+[alt]+[f2] fast enough to switch in tty2. Then the screen will only freeze when I switch back to tty1. Once the screen is frozen, I can't switch to tty2 anymore.
I think the problem has something to do with my nvidia hybrid graphic system. During the installation I installed the packages bumblebee, bbswitch and primus, but uninstalled them because I thought they could be the problem. But although I uninstalled the packages, the "Stamina-Mode" status led is turned on after the system has started and the "Speed-Mode" status led not. I think that's a little bit strange, because I can't imagine which process is controlling these leds.
So I ran just
pacman -S xorg-drivers
and I had to create the xinitrc-file (because I could not find this file in /etc/skel). Now the default GUI appeared after I ran
startx
(I saw some windows and a clock). After that I installed gnome, changed the xinitrc-file in my userhome and got the freeze after a reboot.
I don't know if it has anything to do with my problem, but I get the following error-messages everytime I boot:
[drm:ibx_irq_handler] *ERROR* PCH transcoder A FIFO underrun
[drm:intel_dp_start_link_train] *ERROR* too many full retries, give up
[drm:ilk_display_irq_handler] *ERROR* Pipe A FIFO underrun
interl ips 0000:00:1f.6: thermal reporting for required devices not enabled, aborting
Hoeman
P.S.: Because I'm a total beginner at linux I probably missed the most important informations, but I can give you more if you tell me how
Last edited by Homan42 (2014-10-18 19:43:17)Ok, I could solve the problem myself by installing the latest nvidia driver. Now I guess the intel grahic card is not used anymore, but I don't really know...
Maybe you are looking for
-
Things are even more confusing, because shortly after getting my iphone 4, I tried to update it to the newest version and the phone crashed; my husband reformatted the phone to factory settings, and in the process set up my phone with my daughter's e
-
Hi, I plan to use a PXI-8231 in a PXI-1042 chassis with PXI-8184 controller. The controller doesn't run Windows, it runs LabVIEW RT 7.1. Let's say that in my code I do a TCP Open Connection - since I can't specify what Ethernet adapter to use (8231
-
Hello Forum, I was running a report that was built on report builder at some point an error message of the operation has timed out will come up. I have set the time out to 0 values and more than 600 seconds too. On SQL the report ran within 6 minute.
-
Creating specific image sizes on contact sheets
I need to be able to create specific images size on contact sheets 1.75"x 2.25" on 24"w x ??"L paper. Anyone know how to do this?
-
Hi guys, new guy here. I am having an issue with my front I/O. I have a SB Audigy 2 card (driver version?5.2.496) I connected the front I/O?to it, plugged my headphones in and no sound. I can hear a slight hum through the headphones so i am assuming