[SOLVED] Trouble initialising display - G55VW (GTX 660M)
Couple months back I made the switch from Ubuntu to Arch, which has worked out great on my old laptop, and I've gotten quite familiar with the system.
I've got a new laptop now though, and I can't for the life of me figure out what's wrong with my display/GPU on Arch.
Here's the situation.
I've tried both vesa, nouveau, and nvidia binaries.
Here are a few outputs using the nvidia driver, first nvidia-xconfig --query-gpu-info (which returns two alternating outputs)
Number of GPUs: 1
GPU #0:
Name : GeForce GTX 660M
PCI BusID : PCI:1:0:0
Number of Display Devices: 1
Display Device 0 (DFP-0):
EDID Name : LGD
Minimum HorizSync : 44.370 kHz
Maximum HorizSync : 66.555 kHz
Minimum VertRefresh : 39 Hz
Maximum VertRefresh : 59 Hz
Maximum PixelClock : 139.500 MHz
Maximum Width : 1920 pixels
Maximum Height : 1080 pixels
Preferred Width : 1920 pixels
Preferred Height : 1080 pixels
Preferred VertRefresh : 60 Hz
Physical Width : 340 mm
Physical Height : 190 mm
Number of GPUs: 1
GPU #0:
Name : GeForce GTX 660M
PCI BusID : PCI:1:0:0
Number of Display Devices: 0
Starting a basic xsession works 50% of the time, which I assume stems from the same issue nvidia-xconfig shows, here is the Xorg.0.log output of a failed intialisation
[ 721.328]
X.Org X Server 1.14.2
Release Date: 2013-06-25
[ 721.331] X Protocol Version 11, Revision 0
[ 721.332] Build Operating System: Linux 3.9.7-1-ARCH x86_64
[ 721.333] Current Operating System: Linux kris 3.9.7-1-ARCH #1 SMP PREEMPT Thu Jun 20 22:45:32 CEST 2013 x86_64
[ 721.333] Kernel command line: root=/dev/sda3 ro rootfstype=ext4 systemd.unit=graphical.target initrd=EFI\arch\initramfs-arch.img
[ 721.335] Build Date: 25 June 2013 06:53:24PM
[ 721.336]
[ 721.337] Current version of pixman: 0.30.0
[ 721.338] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 721.338] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 721.339] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 28 17:30:27 2013
[ 721.340] (==) Using config file: "/etc/X11/xorg.conf"
[ 721.340] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 721.340] (==) ServerLayout "Layout0"
[ 721.340] (**) |-->Screen "Screen0" (0)
[ 721.340] (**) | |-->Monitor "Monitor0"
[ 721.340] (**) | |-->Device "Device0"
[ 721.340] (**) |-->Input Device "Keyboard0"
[ 721.340] (**) |-->Input Device "Mouse0"
[ 721.340] (==) Automatically adding devices
[ 721.340] (==) Automatically enabling devices
[ 721.340] (==) Automatically adding GPU devices
[ 721.340] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 721.340] Entry deleted from font path.
[ 721.340] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 721.340] Entry deleted from font path.
[ 721.340] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 721.340] Entry deleted from font path.
[ 721.340] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 721.340] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 721.340] Entry deleted from font path.
[ 721.340] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 721.340] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 721.340] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 721.341] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 721.341] (WW) Disabling Keyboard0
[ 721.341] (WW) Disabling Mouse0
[ 721.341] (II) Loader magic: 0x7fdc20
[ 721.341] (II) Module ABI versions:
[ 721.341] X.Org ANSI C Emulation: 0.4
[ 721.341] X.Org Video Driver: 14.1
[ 721.341] X.Org XInput driver : 19.1
[ 721.341] X.Org Server Extension : 7.0
[ 721.341] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 721.342] (--) PCI:*(0:1:0:0) 10de:0fd4:1043:2117 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 721.342] Initializing built-in extension Generic Event Extension
[ 721.342] Initializing built-in extension SHAPE
[ 721.343] Initializing built-in extension MIT-SHM
[ 721.343] Initializing built-in extension XInputExtension
[ 721.344] Initializing built-in extension XTEST
[ 721.344] Initializing built-in extension BIG-REQUESTS
[ 721.345] Initializing built-in extension SYNC
[ 721.345] Initializing built-in extension XKEYBOARD
[ 721.345] Initializing built-in extension XC-MISC
[ 721.346] Initializing built-in extension SECURITY
[ 721.346] Initializing built-in extension XINERAMA
[ 721.347] Initializing built-in extension XFIXES
[ 721.347] Initializing built-in extension RENDER
[ 721.348] Initializing built-in extension RANDR
[ 721.348] Initializing built-in extension COMPOSITE
[ 721.348] Initializing built-in extension DAMAGE
[ 721.349] Initializing built-in extension MIT-SCREEN-SAVER
[ 721.349] Initializing built-in extension DOUBLE-BUFFER
[ 721.350] Initializing built-in extension RECORD
[ 721.350] Initializing built-in extension DPMS
[ 721.351] Initializing built-in extension X-Resource
[ 721.351] Initializing built-in extension XVideo
[ 721.351] Initializing built-in extension XVideo-MotionCompensation
[ 721.352] Initializing built-in extension XFree86-VidModeExtension
[ 721.352] Initializing built-in extension XFree86-DGA
[ 721.353] Initializing built-in extension XFree86-DRI
[ 721.353] Initializing built-in extension DRI2
[ 721.353] (II) LoadModule: "glx"
[ 721.353] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 721.359] (II) Module glx: vendor="NVIDIA Corporation"
[ 721.359] compiled for 4.0.2, module version = 1.0.0
[ 721.359] Module class: X.Org Server Extension
[ 721.359] (II) NVIDIA GLX Module 319.23 Thu May 16 19:23:10 PDT 2013
[ 721.360] Loading extension GLX
[ 721.360] (II) LoadModule: "nvidia"
[ 721.360] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 721.360] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 721.360] compiled for 4.0.2, module version = 1.0.0
[ 721.360] Module class: X.Org Video Driver
[ 721.360] (II) NVIDIA dlloader X Driver 319.23 Thu May 16 19:02:20 PDT 2013
[ 721.360] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 721.360] (++) using VT number 1
[ 721.360] (II) Loading sub module "fb"
[ 721.360] (II) LoadModule: "fb"
[ 721.360] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 721.360] (II) Module fb: vendor="X.Org Foundation"
[ 721.360] compiled for 1.14.2, module version = 1.0.0
[ 721.360] ABI class: X.Org ANSI C Emulation, version 0.4
[ 721.360] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 721.360] (II) Loading sub module "wfb"
[ 721.360] (II) LoadModule: "wfb"
[ 721.360] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 721.360] (II) Module wfb: vendor="X.Org Foundation"
[ 721.360] compiled for 1.14.2, module version = 1.0.0
[ 721.360] ABI class: X.Org ANSI C Emulation, version 0.4
[ 721.360] (II) Loading sub module "shadow"
[ 721.360] (II) LoadModule: "shadow"
[ 721.360] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 721.360] (II) Module shadow: vendor="X.Org Foundation"
[ 721.360] compiled for 1.14.2, module version = 1.1.0
[ 721.360] ABI class: X.Org ANSI C Emulation, version 0.4
[ 721.360] (II) Loading sub module "ramdac"
[ 721.360] (II) LoadModule: "ramdac"
[ 721.361] (II) Module "ramdac" already built-in
[ 721.361] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 721.361] (==) NVIDIA(0): RGB weight 888
[ 721.361] (==) NVIDIA(0): Default visual is TrueColor
[ 721.361] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 721.361] (**) NVIDIA(0): Enabling 2D acceleration
[ 721.561] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 660M (GK107) at PCI:1:0:0 (GPU-0)
[ 721.561] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 721.561] (--) NVIDIA(0): VideoBIOS: 80.07.2c.00.05
[ 721.561] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 721.565] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 660M at PCI:1:0:0
[ 721.565] (--) NVIDIA(0): CRT-0
[ 721.565] (--) NVIDIA(0): DFP-0 (boot)
[ 721.565] (--) NVIDIA(0): DFP-1
[ 721.565] (--) NVIDIA(0): DFP-2
[ 721.565] (--) NVIDIA(0): DFP-3
[ 721.565] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 721.565] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[ 721.565] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 721.565] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 721.565] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 721.565] (--) NVIDIA(0): DFP-2: 165.0 MHz maximum pixel clock
[ 721.565] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS
[ 721.565] (--) NVIDIA(0): DFP-3: 960.0 MHz maximum pixel clock
[ 721.565] (--) NVIDIA(0): DFP-3: Internal DisplayPort
[ 721.565] (EE) NVIDIA(0): Failed to assign any connected display devices to X screen 0
[ 722.360] (EE) NVIDIA(0): Failing initialization of X screen 0
[ 723.405] (II) UnloadModule: "nvidia"
[ 723.405] (II) UnloadSubModule: "shadow"
[ 723.405] (II) UnloadSubModule: "wfb"
[ 723.405] (II) UnloadSubModule: "fb"
[ 723.405] (EE) Screen(s) found, but none have a usable configuration.
[ 723.405] (EE)
Fatal server error:
[ 723.405] (EE) no screens found(EE)
[ 723.405] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 723.405] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 723.405] (EE)
[ 723.407] (EE) Server terminated with error (1). Closing log file.
I have googled my butt off trying to find a solution to this, problem, with no success. This seems to be a common problem with Nvidia Optimus which is something this laptop simply doesn't have (I bought it very much for that particular reason).
I have tried booting up with nomodeset and later on a custom EDID.bin extracted from Windows registry, thinking the kernel might be reading it wrong, but no.
Here is my dmesg output for the sake of thoroughness.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.9.7-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.1 (GCC) ) #1 SMP PREEMPT Thu Jun 20 22:45:32 CEST 2013
[ 0.000000] Command line: root=/dev/sda3 ro rootfstype=ext4 systemd.unit=graphical.target initrd=EFI\arch\initramfs-arch.img
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dd783fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dd784000-0x00000000dd784fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dd785000-0x00000000dd791fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dd792000-0x00000000ddd92fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ddd93000-0x00000000ddd95fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ddd96000-0x00000000dddaafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dddab000-0x00000000dddb0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dddb1000-0x00000000dddb2fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dddb3000-0x00000000dddbcfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dddbd000-0x00000000ddf16fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ddf17000-0x00000000ddf1afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ddf1b000-0x00000000ddf65fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ddf66000-0x00000000ddf8afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ddf8b000-0x00000000ddf8dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ddf8e000-0x00000000ddf8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ddf90000-0x00000000ddfa6fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ddfa7000-0x00000000ddfacfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ddfad000-0x00000000ddfb4fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ddfb5000-0x00000000ddfb5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ddfb6000-0x00000000ddfc4fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ddfc5000-0x00000000ddfc5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ddfc6000-0x00000000ddfd0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ddfd1000-0x00000000ddfd5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ddfd6000-0x00000000de006fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000de007000-0x00000000de007fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000de008000-0x00000000de017fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000de018000-0x00000000de03ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000de040000-0x00000000de053fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000de054000-0x00000000de054fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000de055000-0x00000000de055fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000de056000-0x00000000de057fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000de058000-0x00000000de059fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000de05a000-0x00000000de05efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000de05f000-0x00000000de073fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000de074000-0x00000000de63bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000de63c000-0x00000000de8bbfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000de8bc000-0x00000000de8c0fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000de8c1000-0x00000000de8c1fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000de8c2000-0x00000000de904fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000de905000-0x00000000ded11fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ded12000-0x00000000deff3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000deff4000-0x00000000deffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f3fffff] usable
[ 0.000000] e820: update [mem 0xd2c01018-0xd2c16e57] usable ==> usable
[ 0.000000] e820: update [mem 0xd2c3e018-0xd2c49857] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000d2c01017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000d2c01018-0x00000000d2c16e57] usable
[ 0.000000] reserve setup_data: [mem 0x00000000d2c16e58-0x00000000d2c3e017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000d2c3e018-0x00000000d2c49857] usable
[ 0.000000] reserve setup_data: [mem 0x00000000d2c49858-0x00000000dd783fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000dd784000-0x00000000dd784fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000dd785000-0x00000000dd791fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000dd792000-0x00000000ddd92fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000ddd93000-0x00000000ddd95fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ddd96000-0x00000000dddaafff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000dddab000-0x00000000dddb0fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000dddb1000-0x00000000dddb2fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000dddb3000-0x00000000dddbcfff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000dddbd000-0x00000000ddf16fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ddf17000-0x00000000ddf1afff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ddf1b000-0x00000000ddf65fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ddf66000-0x00000000ddf8afff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ddf8b000-0x00000000ddf8dfff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ddf8e000-0x00000000ddf8ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ddf90000-0x00000000ddfa6fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ddfa7000-0x00000000ddfacfff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ddfad000-0x00000000ddfb4fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ddfb5000-0x00000000ddfb5fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ddfb6000-0x00000000ddfc4fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ddfc5000-0x00000000ddfc5fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ddfc6000-0x00000000ddfd0fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ddfd1000-0x00000000ddfd5fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ddfd6000-0x00000000de006fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000de007000-0x00000000de007fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000de008000-0x00000000de017fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000de018000-0x00000000de03ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000de040000-0x00000000de053fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000de054000-0x00000000de054fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000de055000-0x00000000de055fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000de056000-0x00000000de057fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000de058000-0x00000000de059fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000de05a000-0x00000000de05efff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000de05f000-0x00000000de073fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000de074000-0x00000000de63bfff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000de63c000-0x00000000de8bbfff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000de8bc000-0x00000000de8c0fff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000de8c1000-0x00000000de8c1fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000de8c2000-0x00000000de904fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000de905000-0x00000000ded11fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ded12000-0x00000000deff3fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000deff4000-0x00000000deffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000021f3fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0xde88d000 ACPI 2.0=0xde88d000 SMBIOS=0xf04c0 MPS=0xfd4d0
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
[ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000008000-0x0000000000010000) (0MB)
[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000010000-0x000000000005e000) (0MB)
[ 0.000000] efi: mem03: type=4, attr=0xf, range=[0x000000000005e000-0x0000000000060000) (0MB)
[ 0.000000] efi: mem04: type=3, attr=0xf, range=[0x0000000000060000-0x000000000009f000) (0MB)
[ 0.000000] efi: mem05: type=6, attr=0x800000000000000f, range=[0x000000000009f000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001100000) (1MB)
[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000001100000-0x0000000002000000) (15MB)
[ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000002000000-0x0000000002f51000) (15MB)
[ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000002f51000-0x000000007fd27000) (1997MB)
[ 0.000000] efi: mem11: type=2, attr=0xf, range=[0x000000007fd27000-0x0000000080000000) (2MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000080000000-0x00000000d1a8f000) (1306MB)
[ 0.000000] efi: mem13: type=1, attr=0xf, range=[0x00000000d1a8f000-0x00000000d1e2a000) (3MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x00000000d1e2a000-0x00000000d21c5000) (3MB)
[ 0.000000] efi: mem15: type=4, attr=0xf, range=[0x00000000d21c5000-0x00000000d27c7000) (6MB)
[ 0.000000] efi: mem16: type=1, attr=0xf, range=[0x00000000d27c7000-0x00000000d27ee000) (0MB)
[ 0.000000] efi: mem17: type=7, attr=0xf, range=[0x00000000d27ee000-0x00000000d2815000) (0MB)
[ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x00000000d2815000-0x00000000d29da000) (1MB)
[ 0.000000] efi: mem19: type=7, attr=0xf, range=[0x00000000d29da000-0x00000000d29dc000) (0MB)
[ 0.000000] efi: mem20: type=4, attr=0xf, range=[0x00000000d29dc000-0x00000000d2a34000) (0MB)
[ 0.000000] efi: mem21: type=7, attr=0xf, range=[0x00000000d2a34000-0x00000000d2c01000) (1MB)
[ 0.000000] efi: mem22: type=2, attr=0xf, range=[0x00000000d2c01000-0x00000000d2c17000) (0MB)
[ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x00000000d2c17000-0x00000000d2c37000) (0MB)
[ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x00000000d2c37000-0x00000000d2c3e000) (0MB)
[ 0.000000] efi: mem25: type=2, attr=0xf, range=[0x00000000d2c3e000-0x00000000d2c4a000) (0MB)
[ 0.000000] efi: mem26: type=4, attr=0xf, range=[0x00000000d2c4a000-0x00000000d2cbe000) (0MB)
[ 0.000000] efi: mem27: type=7, attr=0xf, range=[0x00000000d2cbe000-0x00000000d2cc3000) (0MB)
[ 0.000000] efi: mem28: type=4, attr=0xf, range=[0x00000000d2cc3000-0x00000000d2d0c000) (0MB)
[ 0.000000] efi: mem29: type=7, attr=0xf, range=[0x00000000d2d0c000-0x00000000d2d0d000) (0MB)
[ 0.000000] efi: mem30: type=4, attr=0xf, range=[0x00000000d2d0d000-0x00000000dc40c000) (150MB)
[ 0.000000] efi: mem31: type=7, attr=0xf, range=[0x00000000dc40c000-0x00000000dc40e000) (0MB)
[ 0.000000] efi: mem32: type=4, attr=0xf, range=[0x00000000dc40e000-0x00000000dc429000) (0MB)
[ 0.000000] efi: mem33: type=2, attr=0xf, range=[0x00000000dc429000-0x00000000dc42a000) (0MB)
[ 0.000000] efi: mem34: type=4, attr=0xf, range=[0x00000000dc42a000-0x00000000dd0d8000) (12MB)
[ 0.000000] efi: mem35: type=7, attr=0xf, range=[0x00000000dd0d8000-0x00000000dd766000) (6MB)
[ 0.000000] efi: mem36: type=3, attr=0xf, range=[0x00000000dd766000-0x00000000dd784000) (0MB)
[ 0.000000] efi: mem37: type=6, attr=0x800000000000000f, range=[0x00000000dd784000-0x00000000dd785000) (0MB)
[ 0.000000] efi: mem38: type=3, attr=0xf, range=[0x00000000dd785000-0x00000000dd792000) (0MB)
[ 0.000000] efi: mem39: type=10, attr=0xf, range=[0x00000000dd792000-0x00000000ddd93000) (6MB)
[ 0.000000] efi: mem40: type=5, attr=0x800000000000000f, range=[0x00000000ddd93000-0x00000000ddd96000) (0MB)
[ 0.000000] efi: mem41: type=3, attr=0xf, range=[0x00000000ddd96000-0x00000000dddab000) (0MB)
[ 0.000000] efi: mem42: type=5, attr=0x800000000000000f, range=[0x00000000dddab000-0x00000000dddb1000) (0MB)
[ 0.000000] efi: mem43: type=3, attr=0xf, range=[0x00000000dddb1000-0x00000000dddb3000) (0MB)
[ 0.000000] efi: mem44: type=5, attr=0x800000000000000f, range=[0x00000000dddb3000-0x00000000dddbd000) (0MB)
[ 0.000000] efi: mem45: type=3, attr=0xf, range=[0x00000000dddbd000-0x00000000ddf17000) (1MB)
[ 0.000000] efi: mem46: type=5, attr=0x800000000000000f, range=[0x00000000ddf17000-0x00000000ddf1b000) (0MB)
[ 0.000000] efi: mem47: type=3, attr=0xf, range=[0x00000000ddf1b000-0x00000000ddf66000) (0MB)
[ 0.000000] efi: mem48: type=5, attr=0x800000000000000f, range=[0x00000000ddf66000-0x00000000ddf6d000) (0MB)
[ 0.000000] efi: mem49: type=6, attr=0x800000000000000f, range=[0x00000000ddf6d000-0x00000000ddf7a000) (0MB)
[ 0.000000] efi: mem50: type=5, attr=0x800000000000000f, range=[0x00000000ddf7a000-0x00000000ddf8b000) (0MB)
[ 0.000000] efi: mem51: type=3, attr=0xf, range=[0x00000000ddf8b000-0x00000000ddf8e000) (0MB)
[ 0.000000] efi: mem52: type=5, attr=0x800000000000000f, range=[0x00000000ddf8e000-0x00000000ddf90000) (0MB)
[ 0.000000] efi: mem53: type=3, attr=0xf, range=[0x00000000ddf90000-0x00000000ddfa7000) (0MB)
[ 0.000000] efi: mem54: type=5, attr=0x800000000000000f, range=[0x00000000ddfa7000-0x00000000ddfad000) (0MB)
[ 0.000000] efi: mem55: type=3, attr=0xf, range=[0x00000000ddfad000-0x00000000ddfb5000) (0MB)
[ 0.000000] efi: mem56: type=5, attr=0x800000000000000f, range=[0x00000000ddfb5000-0x00000000ddfb6000) (0MB)
[ 0.000000] efi: mem57: type=3, attr=0xf, range=[0x00000000ddfb6000-0x00000000ddfc5000) (0MB)
[ 0.000000] efi: mem58: type=5, attr=0x800000000000000f, range=[0x00000000ddfc5000-0x00000000ddfc6000) (0MB)
[ 0.000000] efi: mem59: type=3, attr=0xf, range=[0x00000000ddfc6000-0x00000000ddfd1000) (0MB)
[ 0.000000] efi: mem60: type=5, attr=0x800000000000000f, range=[0x00000000ddfd1000-0x00000000ddfd6000) (0MB)
[ 0.000000] efi: mem61: type=3, attr=0xf, range=[0x00000000ddfd6000-0x00000000de007000) (0MB)
[ 0.000000] efi: mem62: type=5, attr=0x800000000000000f, range=[0x00000000de007000-0x00000000de008000) (0MB)
[ 0.000000] efi: mem63: type=3, attr=0xf, range=[0x00000000de008000-0x00000000de018000) (0MB)
[ 0.000000] efi: mem64: type=5, attr=0x800000000000000f, range=[0x00000000de018000-0x00000000de040000) (0MB)
[ 0.000000] efi: mem65: type=3, attr=0xf, range=[0x00000000de040000-0x00000000de054000) (0MB)
[ 0.000000] efi: mem66: type=5, attr=0x800000000000000f, range=[0x00000000de054000-0x00000000de055000) (0MB)
[ 0.000000] efi: mem67: type=3, attr=0xf, range=[0x00000000de055000-0x00000000de056000) (0MB)
[ 0.000000] efi: mem68: type=5, attr=0x800000000000000f, range=[0x00000000de056000-0x00000000de058000) (0MB)
[ 0.000000] efi: mem69: type=3, attr=0xf, range=[0x00000000de058000-0x00000000de05a000) (0MB)
[ 0.000000] efi: mem70: type=5, attr=0x800000000000000f, range=[0x00000000de05a000-0x00000000de05f000) (0MB)
[ 0.000000] efi: mem71: type=3, attr=0xf, range=[0x00000000de05f000-0x00000000de074000) (0MB)
[ 0.000000] efi: mem72: type=6, attr=0x800000000000000f, range=[0x00000000de074000-0x00000000de0f5000) (0MB)
[ 0.000000] efi: mem73: type=5, attr=0x800000000000000f, range=[0x00000000de0f5000-0x00000000de112000) (0MB)
[ 0.000000] efi: mem74: type=6, attr=0x800000000000000f, range=[0x00000000de112000-0x00000000de119000) (0MB)
[ 0.000000] efi: mem75: type=6, attr=0x800000000000000f, range=[0x00000000de119000-0x00000000de11b000) (0MB)
[ 0.000000] efi: mem76: type=6, attr=0x800000000000000f, range=[0x00000000de11b000-0x00000000de13c000) (0MB)
[ 0.000000] efi: mem77: type=0, attr=0xf, range=[0x00000000de13c000-0x00000000de490000) (3MB)
[ 0.000000] efi: mem78: type=0, attr=0xf, range=[0x00000000de490000-0x00000000de5d1000) (1MB)
[ 0.000000] efi: mem79: type=0, attr=0xf, range=[0x00000000de5d1000-0x00000000de5d7000) (0MB)
[ 0.000000] efi: mem80: type=0, attr=0xf, range=[0x00000000de5d7000-0x00000000de63c000) (0MB)
[ 0.000000] efi: mem81: type=10, attr=0xf, range=[0x00000000de63c000-0x00000000de6ee000) (0MB)
[ 0.000000] efi: mem82: type=10, attr=0xf, range=[0x00000000de6ee000-0x00000000de8a6000) (1MB)
[ 0.000000] efi: mem83: type=10, attr=0xf, range=[0x00000000de8a6000-0x00000000de8a8000) (0MB)
[ 0.000000] efi: mem84: type=10, attr=0xf, range=[0x00000000de8a8000-0x00000000de8bc000) (0MB)
[ 0.000000] efi: mem85: type=9, attr=0xf, range=[0x00000000de8bc000-0x00000000de8c0000) (0MB)
[ 0.000000] efi: mem86: type=9, attr=0xf, range=[0x00000000de8c0000-0x00000000de8c1000) (0MB)
[ 0.000000] efi: mem87: type=4, attr=0xf, range=[0x00000000de8c1000-0x00000000de8c2000) (0MB)
[ 0.000000] efi: mem88: type=10, attr=0xf, range=[0x00000000de8c2000-0x00000000de905000) (0MB)
[ 0.000000] efi: mem89: type=4, attr=0xf, range=[0x00000000de905000-0x00000000dea51000) (1MB)
[ 0.000000] efi: mem90: type=3, attr=0xf, range=[0x00000000dea51000-0x00000000dece9000) (2MB)
[ 0.000000] efi: mem91: type=4, attr=0xf, range=[0x00000000dece9000-0x00000000decf9000) (0MB)
[ 0.000000] efi: mem92: type=3, attr=0xf, range=[0x00000000decf9000-0x00000000ded0b000) (0MB)
[ 0.000000] efi: mem93: type=4, attr=0xf, range=[0x00000000ded0b000-0x00000000ded12000) (0MB)
[ 0.000000] efi: mem94: type=6, attr=0x800000000000000f, range=[0x00000000ded12000-0x00000000deff4000) (2MB)
[ 0.000000] efi: mem95: type=4, attr=0xf, range=[0x00000000deff4000-0x00000000df000000) (0MB)
[ 0.000000] efi: mem96: type=7, attr=0xf, range=[0x0000000100000000-0x000000021f400000) (4596MB)
[ 0.000000] efi: mem97: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
[ 0.000000] efi: mem98: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem99: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
[ 0.000000] efi: mem100: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem101: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem102: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. G55VW/G55VW, BIOS G55VW.209 06/07/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x21f400 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FF0000000 write-back
[ 0.000000] 2 base 210000000 mask FF8000000 write-back
[ 0.000000] 3 base 218000000 mask FFC000000 write-back
[ 0.000000] 4 base 21C000000 mask FFE000000 write-back
[ 0.000000] 5 base 21E000000 mask FFF000000 write-back
[ 0.000000] 6 base 21F000000 mask FFFC00000 write-back
[ 0.000000] 7 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 8 base 0DFC00000 mask FFFC00000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xdfc00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd830-0x000fd83f] mapped at [ffff8800000fd830]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x03b30000, 0x03b30fff] PGTABLE
[ 0.000000] BRK [0x03b31000, 0x03b31fff] PGTABLE
[ 0.000000] BRK [0x03b32000, 0x03b32fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21f200000-0x21f3fffff]
[ 0.000000] [mem 0x21f200000-0x21f3fffff] page 2M
[ 0.000000] BRK [0x03b33000, 0x03b33fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21f1fffff]
[ 0.000000] [mem 0x21c000000-0x21f1fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
[ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xdd783fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xdd5fffff] page 2M
[ 0.000000] [mem 0xdd600000-0xdd783fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xdd785000-0xdd791fff]
[ 0.000000] [mem 0xdd785000-0xdd791fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xddd96000-0xdddaafff]
[ 0.000000] [mem 0xddd96000-0xdddaafff] page 4k
[ 0.000000] BRK [0x03b34000, 0x03b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xdddb1000-0xdddb2fff]
[ 0.000000] [mem 0xdddb1000-0xdddb2fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xdddbd000-0xddf16fff]
[ 0.000000] [mem 0xdddbd000-0xddf16fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xddf1b000-0xddf65fff]
[ 0.000000] [mem 0xddf1b000-0xddf65fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xddf8b000-0xddf8dfff]
[ 0.000000] [mem 0xddf8b000-0xddf8dfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xddf90000-0xddfa6fff]
[ 0.000000] [mem 0xddf90000-0xddfa6fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xddfad000-0xddfb4fff]
[ 0.000000] [mem 0xddfad000-0xddfb4fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xddfb6000-0xddfc4fff]
[ 0.000000] [mem 0xddfb6000-0xddfc4fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xddfc6000-0xddfd0fff]
[ 0.000000] [mem 0xddfc6000-0xddfd0fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xddfd6000-0xde006fff]
[ 0.000000] [mem 0xddfd6000-0xde006fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xde008000-0xde017fff]
[ 0.000000] [mem 0xde008000-0xde017fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xde040000-0xde053fff]
[ 0.000000] [mem 0xde040000-0xde053fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xde055000-0xde055fff]
[ 0.000000] [mem 0xde055000-0xde055fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xde058000-0xde059fff]
[ 0.000000] [mem 0xde058000-0xde059fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xde05f000-0xde073fff]
[ 0.000000] [mem 0xde05f000-0xde073fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xde8c1000-0xde8c1fff]
[ 0.000000] [mem 0xde8c1000-0xde8c1fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xde905000-0xded11fff]
[ 0.000000] [mem 0xde905000-0xde9fffff] page 4k
[ 0.000000] [mem 0xdea00000-0xdebfffff] page 2M
[ 0.000000] [mem 0xdec00000-0xded11fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xdeff4000-0xdeffffff]
[ 0.000000] [mem 0xdeff4000-0xdeffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x7fd27000-0x7fffffff]
[ 0.000000] ACPI: RSDP 00000000de88d000 00024 (v02 _ASUS_)
[ 0.000000] ACPI: XSDT 00000000de88d078 0006C (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000de89f1a8 000F4 (v04 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000de88d178 1202F (v02 _ASUS_ Notebook 00000013 INTL 20091112)
[ 0.000000] ACPI: FACS 00000000de8b9f80 00040
[ 0.000000] ACPI: APIC 00000000de89f2a0 00092 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 00000000de89f338 00044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: ECDT 00000000de89f380 000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: MCFG 00000000de89f448 0003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[ 0.000000] ACPI: SLIC 00000000de89f488 00176 (v01 _ASUS_ Notebook 01072009 ASUS 00000001)
[ 0.000000] ACPI: HPET 00000000de89f600 00038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 00000000de89f638 0090A (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000de89ff48 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021f3fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21f3fffff]
[ 0.000000] NODE_DATA [mem 0x21f3ee000-0x21f3f2fff]
[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880216a00000-ffff88021e9fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x21f3fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xdd783fff]
[ 0.000000] node 0: [mem 0xdd785000-0xdd791fff]
[ 0.000000] node 0: [mem 0xddd96000-0xdddaafff]
[ 0.000000] node 0: [mem 0xdddb1000-0xdddb2fff]
[ 0.000000] node 0: [mem 0xdddbd000-0xddf16fff]
[ 0.000000] node 0: [mem 0xddf1b000-0xddf65fff]
[ 0.000000] node 0: [mem 0xddf8b000-0xddf8dfff]
[ 0.000000] node 0: [mem 0xddf90000-0xddfa6fff]
[ 0.000000] node 0: [mem 0xddfad000-0xddfb4fff]
[ 0.000000] node 0: [mem 0xddfb6000-0xddfc4fff]
[ 0.000000] node 0: [mem 0xddfc6000-0xddfd0fff]
[ 0.000000] node 0: [mem 0xddfd6000-0xde006fff]
[ 0.000000] node 0: [mem 0xde008000-0xde017fff]
[ 0.000000] node 0: [mem 0xde040000-0xde053fff]
[ 0.000000] node 0: [mem 0xde055000-0xde055fff]
[ 0.000000] node 0: [mem 0xde058000-0xde059fff]
[ 0.000000] node 0: [mem 0xde05f000-0xde073fff]
[ 0.000000] node 0: [mem 0xde8c1000-0xde8c1fff]
[ 0.000000] node 0: [mem 0xde905000-0xded11fff]
[ 0.000000] node 0: [mem 0xdeff4000-0xdeffffff]
[ 0.000000] node 0: [mem 0x100000000-0x21f3fffff]
[ 0.000000] On node 0 totalpages: 2085294
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 25 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14137 pages used for memmap
[ 0.000000] DMA32 zone: 904720 pages, LIFO batch:31
[ 0.000000] Normal zone: 18384 pages used for memmap
[ 0.000000] Normal zone: 1176576 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000d2c01000 - 00000000d2c02000
[ 0.000000] PM: Registered nosave memory: 00000000d2c16000 - 00000000d2c17000
[ 0.000000] PM: Registered nosave memory: 00000000d2c3e000 - 00000000d2c3f000
[ 0.000000] PM: Registered nosave memory: 00000000d2c49000 - 00000000d2c4a000
[ 0.000000] PM: Registered nosave memory: 00000000dd784000 - 00000000dd785000
[ 0.000000] PM: Registered nosave memory: 00000000dd792000 - 00000000ddd93000
[ 0.000000] PM: Registered nosave memory: 00000000ddd93000 - 00000000ddd96000
[ 0.000000] PM: Registered nosave memory: 00000000dddab000 - 00000000dddb1000
[ 0.000000] PM: Registered nosave memory: 00000000dddb3000 - 00000000dddbd000
[ 0.000000] PM: Registered nosave memory: 00000000ddf17000 - 00000000ddf1b000
[ 0.000000] PM: Registered nosave memory: 00000000ddf66000 - 00000000ddf8b000
[ 0.000000] PM: Registered nosave memory: 00000000ddf8e000 - 00000000ddf90000
[ 0.000000] PM: Registered nosave memory: 00000000ddfa7000 - 00000000ddfad000
[ 0.000000] PM: Registered nosave memory: 00000000ddfb5000 - 00000000ddfb6000
[ 0.000000] PM: Registered nosave memory: 00000000ddfc5000 - 00000000ddfc6000
[ 0.000000] PM: Registered nosave memory: 00000000ddfd1000 - 00000000ddfd6000
[ 0.000000] PM: Registered nosave memory: 00000000de007000 - 00000000de008000
[ 0.000000] PM: Registered nosave memory: 00000000de018000 - 00000000de040000
[ 0.000000] PM: Registered nosave memory: 00000000de054000 - 00000000de055000
[ 0.000000] PM: Registered nosave memory: 00000000de056000 - 00000000de058000
[ 0.000000] PM: Registered nosave memory: 00000000de05a000 - 00000000de05f000
[ 0.000000] PM: Registered nosave memory: 00000000de074000 - 00000000de63c000
[ 0.000000] PM: Registered nosave memory: 00000000de63c000 - 00000000de8bc000
[ 0.000000] PM: Registered nosave memory: 00000000de8bc000 - 00000000de8c1000
[ 0.000000] PM: Registered nosave memory: 00000000de8c2000 - 00000000de905000
[ 0.000000] PM: Registered nosave memory: 00000000ded12000 - 00000000deff4000
[ 0.000000] PM: Registered nosave memory: 00000000df000000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
[ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021f000000 s85824 r8192 d20672 u262144
[ 0.000000] pcpu-alloc: s85824 r8192 d20672 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2052684
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda3 ro rootfstype=ext4 systemd.unit=graphical.target initrd=EFI\arch\initramfs-arch.img
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7944460k/8900608k available (4984k kernel code, 559432k absent, 396716k reserved, 3966k data, 1092k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 2294.752 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4591.73 BogoMIPS (lpj=7649173)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000018] init_memory_mapping: [mem 0xdd784000-0xdd784fff]
[ 0.000019] [mem 0xdd784000-0xdd784fff] page 4k
[ 0.000031] init_memory_mapping: [mem 0xddd93000-0xddd95fff]
[ 0.000032] [mem 0xddd93000-0xddd95fff] page 4k
[ 0.000040] init_memory_mapping: [mem 0xdddab000-0xdddb0fff]
[ 0.000041] [mem 0xdddab000-0xdddb0fff] page 4k
[ 0.000049] init_memory_mapping: [mem 0xdddb3000-0xdddbcfff]
[ 0.000050] [mem 0xdddb3000-0xdddbcfff] page 4k
[ 0.000060] init_memory_mapping: [mem 0xddf17000-0xddf1afff]
[ 0.000061] [mem 0xddf17000-0xddf1afff] page 4k
[ 0.000068] init_memory_mapping: [mem 0xddf66000-0xddf6cfff]
[ 0.000069] [mem 0xddf66000-0xddf6cfff] page 4k
[ 0.000077] init_memory_mapping: [mem 0xddf6d000-0xddf79fff]
[ 0.000078] [mem 0xddf6d000-0xddf79fff] page 4k
[ 0.000085] init_memory_mapping: [mem 0xddf7a000-0xddf8afff]
[ 0.000086] [mem 0xddf7a000-0xddf8afff] page 4k
[ 0.000093] init_memory_mapping: [mem 0xddf8e000-0xddf8ffff]
[ 0.000094] [mem 0xddf8e000-0xddf8ffff] page 4k
[ 0.000101] init_memory_mapping: [mem 0xddfa7000-0xddfacfff]
[ 0.000102] [mem 0xddfa7000-0xddfacfff] page 4k
[ 0.000108] init_memory_mapping: [mem 0xddfb5000-0xddfb5fff]
[ 0.000109] [mem 0xddfb5000-0xddfb5fff] page 4k
[ 0.000116] init_memory_mapping: [mem 0xddfc5000-0xddfc5fff]
[ 0.000117] [mem 0xddfc5000-0xddfc5fff] page 4k
[ 0.000123] init_memory_mapping: [mem 0xddfd1000-0xddfd5fff]
[ 0.000124] [mem 0xddfd1000-0xddfd5fff] page 4k
[ 0.000130] init_memory_mapping: [mem 0xde007000-0xde007fff]
[ 0.000131] [mem 0xde007000-0xde007fff] page 4k
[ 0.000137] init_memory_mapping: [mem 0xde018000-0xde03ffff]
[ 0.000138] [mem 0xde018000-0xde03ffff] page 4k
[ 0.000145] init_memory_mapping: [mem 0xde054000-0xde054fff]
[ 0.000146] [mem 0xde054000-0xde054fff] page 4k
[ 0.000153] init_memory_mapping: [mem 0xde056000-0xde057fff]
[ 0.000154] [mem 0xde056000-0xde057fff] page 4k
[ 0.000160] init_memory_mapping: [mem 0xde05a000-0xde05efff]
[ 0.000161] [mem 0xde05a000-0xde05efff] page 4k
[ 0.000167] init_memory_mapping: [mem 0xde074000-0xde0f4fff]
[ 0.000168] [mem 0xde074000-0xde0f4fff] page 4k
[ 0.000175] init_memory_mapping: [mem 0xde0f5000-0xde111fff]
[ 0.000177] [mem 0xde0f5000-0xde111fff] page 4k
[ 0.000182] init_memory_mapping: [mem 0xde112000-0xde13bfff]
[ 0.000183] [mem 0xde112000-0xde13bfff] page 4k
[ 0.000190] init_memory_mapping: [mem 0xded12000-0xdeff3fff]
[ 0.000191] [mem 0xded12000-0xdeff3fff] page 4k
[ 0.022837] Security Framework initialized
[ 0.022844] AppArmor: AppArmor disabled by boot time parameter
[ 0.023321] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.025401] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.026329] Mount-cache hash table entries: 256
[ 0.026510] Initializing cgroup subsys cpuacct
[ 0.026512] Initializing cgroup subsys memory
[ 0.026518] Initializing cgroup subsys devices
[ 0.026520] Initializing cgroup subsys freezer
[ 0.026521] Initializing cgroup subsys net_cls
[ 0.026522] Initializing cgroup subsys blkio
[ 0.026546] CPU: Physical Processor ID: 0
[ 0.026547] CPU: Processor Core ID: 0
[ 0.026552] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.026941] mce: CPU supports 9 MCE banks
[ 0.026954] CPU0: Thermal monitoring enabled (TM1)
[ 0.026962] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 1
[ 0.027097] Freeing SMP alternatives: 20k freed
[ 0.028065] ACPI: Core revision 20130117
[ 0.035706] ACPI: All ACPI Tables successfully acquired
[ 0.042340] ftrace: allocating 19550 entries in 77 pages
[ 0.052173] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.085161] smpboot: CPU0: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz (fam: 06, model: 3a, stepping: 09)
[ 0.085168] TSC deadline timer enabled
[ 0.085177] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver.
[ 0.085183] ... version: 3
[ 0.085183] ... bit width: 48
[ 0.085184] ... generic registers: 4
[ 0.085185] ... value mask: 0000ffffffffffff
[ 0.085186] ... max period: 000000007fffffff
[ 0.085187] ... fixed-purpose events: 3
[ 0.085188] ... event mask: 000000070000000f
[ 0.135513] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.121917] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
[ 0.257563] Brought up 8 CPUs
[ 0.257567] smpboot: Total of 8 processors activated (36730.86 BogoMIPS)
[ 0.264931] devtmpfs: initialized
[ 0.266116] PM: Registering ACPI NVS region [mem 0xdd792000-0xddd92fff] (6295552 bytes)
[ 0.266206] PM: Registering ACPI NVS region [mem 0xde63c000-0xde8bbfff] (2621440 bytes)
[ 0.266245] PM: Registering ACPI NVS region [mem 0xde8c2000-0xde904fff] (274432 bytes)
[ 0.266880] RTC time: 15:18:25, date: 06/28/13
[ 0.266919] NET: Registered protocol family 16
[ 0.267026] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.267027] ACPI: bus type PCI registered
[ 0.267078] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.267081] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.284615] PCI: Using configuration type 1 for base access
[ 0.285229] bio: create slab <bio-0> at 0
[ 0.285279] ACPI: Added _OSI(Module Device)
[ 0.285280] ACPI: Added _OSI(Processor Device)
[ 0.285281] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.285282] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.287260] ACPI: EC: EC description table is found, configuring boot EC
[ 0.289284] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.414899] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.415237] ACPI: SSDT 00000000de5e9018 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.415731] ACPI: Dynamic OEM Table Load:
[ 0.415733] ACPI: SSDT (null) 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.415998] ACPI: SSDT 00000000de5eaa98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.416517] ACPI: Dynamic OEM Table Load:
[ 0.416519] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.416661] ACPI: SSDT 00000000de5ebc18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.417153] ACPI: Dynamic OEM Table Load:
[ 0.417155] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.418311] ACPI: Interpreter enabled
[ 0.418318] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568)
[ 0.418323] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
[ 0.418337] ACPI: (supports S0 S3 S4 S5)
[ 0.418339] ACPI: Using IOAPIC for interrupt routing
[ 0.418364] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.424999] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.425570] PCI host bridge to bus 0000:00
[ 0.425573] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.425575] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.425577] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.425579] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.425580] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.425582] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.425583] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.425585] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.425586] pci_bus 0000:00: root bus resource [mem 0xdfc00000-0xfeafffff]
[ 0.425594] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.425692] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.425722] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.425749] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.425809] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.425834] pci 0000:00:14.0: reg 10: [mem 0xf7300000-0xf730ffff 64bit]
[ 0.425908] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.425937] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.425975] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.425999] pci 0000:00:16.0: reg 10: [mem 0xf731b000-0xf731b00f 64bit]
[ 0.426076] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.426169] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.426191] pci 0000:00:1a.0: reg 10: [mem 0xf7318000-0xf73183ff]
[ 0.426285] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.426321] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.426358] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.426374] pci 0000:00:1b.0: reg 10: [mem 0xf7310000-0xf7313fff 64bit]
[ 0.426445] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.426484] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.426518] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.426600] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.426643] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.426678] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.426758] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.426839] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
[ 0.426920] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.426971] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.427009] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
[ 0.427139] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.427201] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.427242] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.427264] pci 0000:00:1d.0: reg 10: [mem 0xf7317000-0xf73173ff]
[ 0.427357] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.427389] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.427425] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[ 0.427601] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.427621] pci 0000:00:1f.2: reg 10: [io 0xf070-0xf077]
[ 0.427629] pci 0000:00:1f.2: reg 14: [io 0xf060-0xf063]
[ 0.427637] pci 0000:00:1f.2: reg 18: [io 0xf050-0xf057]
[ 0.427646] pci 0000:00:1f.2: reg 1c: [io 0xf040-0xf043]
[ 0.427654] pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f]
[ 0.427663] pci 0000:00:1f.2: reg 24: [mem 0xf7316000-0xf73167ff]
[ 0.427710] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.427782] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.427799] pci 0000:00:1f.3: reg 10: [mem 0xf7315000-0xf73150ff 64bit]
[ 0.427821] pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
[ 0.427938] pci 0000:01:00.0: [10de:0fd4] type 00 class 0x030000
[ 0.427947] pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
[ 0.427957] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.427967] pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.427973] pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
[ 0.427980] pci 0000:01:00.0: reg 30: [mem 0xf7000000-0xf707ffff pref]
[ 0.428059] pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
[ 0.428068] pci 0000:01:00.1: reg 10: [mem 0xf7080000-0xf7083fff]
[ 0.434790] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.434795] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.434810] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.434813] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.434871] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.434958] pci 0000:03:00.0: [168c:0032] type 00 class 0x028000
[ 0.434986] pci 0000:03:00.0: reg 10: [mem 0xf7200000-0xf727ffff 64bit]
[ 0.435051] pci 0000:03:00.0: reg 30: [mem 0xf7280000-0xf728ffff pref]
[ 0.435119] pci 0000:03:00.0: supports D1 D2
[ 0.435121] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.435161] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.441462] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.441483] pci 0000:00:1c.1: bridge window [mem 0xf7200000-0xf72fffff]
[ 0.441568] pci 0000:04:00.0: [1969:1083] type 00 class 0x020000
[ 0.441596] pci 0000:04:00.0: reg 10: [mem 0xf7100000-0xf713ffff 64bit]
[ 0.441611] pci 0000:04:00.0: reg 18: [io 0xd000-0xd07f]
[ 0.441741] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.441781] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.448133] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.448149] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.448153] pci 0000:00:1c.3: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.448242] pci 0000:00:1c.4: PCI bridge to [bus 05-30]
[ 0.448359] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[ 0.448550] acpi PNP0A08:00: ACPI _OSC control (0x18) granted
[ 0.449237] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
[ 0.449285] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 12)
[ 0.449334] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 12)
[ 0.449378] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 12)
[ 0.449423] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.449471] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.449516] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 12)
[ 0.449561] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12)
[ 0.449887] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 0.449894] acpi root: \_SB_.PCI0 notify handler is installed
[ 0.449954] Found 1 acpi root devices
[ 0.450018] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 0.450151] ACPI: No dock devices found.
[ 0.450204] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.450206] vgaarb: loaded
[ 0.450207] vgaarb: bridge control possible 0000:01:00.0
[ 0.450230] PCI: Using ACPI for IRQ routing
[ 0.452998] PCI: pci_cache_line_size set to 64 bytes
[ 0.453055] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.453056] e820: reserve RAM buffer [mem 0xd2c01018-0xd3ffffff]
[ 0.453058] e820: reserve RAM buffer [mem 0xd2c3e018-0xd3ffffff]
[ 0.453059] e820: reserve RAM buffer [mem 0xdd784000-0xdfffffff]
[ 0.453065] e820: reserve RAM buffer [mem 0xdd792000-0xdfffffff]
[ 0.453071] e820: reserve RAM buffer [mem 0xdddab000-0xdfffffff]
[ 0.453076] e820: reserve RAM buffer [mem 0xdddb3000-0xdfffffff]
[ 0.453082] e820: reserve RAM buffer [mem 0xddf17000-0xdfffffff]
[ 0.453087] e820: reserve RAM buffer [mem 0xddf66000-0xdfffffff]
[ 0.453092] e820: reserve RAM buffer [mem 0xddf8e000-0xdfffffff]
[ 0.453097] e820: reserve RAM buffer [mem 0xddfa7000-0xdfffffff]
[ 0.453101] e820: reserve RAM buffer [mem 0xddfb5000-0xdfffffff]
[ 0.453106] e820: reserve RAM buffer [mem 0xddfc5000-0xdfffffff]
[ 0.453110] e820: reserve RAM buffer [mem 0xddfd1000-0xdfffffff]
[ 0.453115] e820: reserve RAM buffer [mem 0xde007000-0xdfffffff]
[ 0.453119] e820: reserve RAM buffer [mem 0xde018000-0xdfffffff]
[ 0.453122] e820: reserve RAM buffer [mem 0xde054000-0xdfffffff]
[ 0.453126] e820: reserve RAM buffer [mem 0xde056000-0xdfffffff]
[ 0.453129] e820: reserve RAM buffer [mem 0xde05a000-0xdfffffff]
[ 0.453132] e820: reserve RAM buffer [mem 0xde074000-0xdfffffff]
[ 0.453135] e820: reserve RAM buffer [mem 0xde8c2000-0xdfffffff]
[ 0.453137] e820: reserve RAM buffer [mem 0xded12000-0xdfffffff]
[ 0.453138] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[ 0.453140] e820: reserve RAM buffer [mem 0x21f400000-0x21fffffff]
[ 0.453217] NetLabel: Initializing
[ 0.453219] NetLabel: domain hash size = 128
[ 0.453220] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.453230] NetLabel: unlabeled traffic allowed by default
[ 0.453246] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.453251] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.455263] Switching to clocksource hpet
[ 0.459100] pnp: PnP ACPI init
[ 0.459113] ACPI: bus type PNP registered
[ 0.459176] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.459179] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.459246] pnp 00:01: [dma 4]
[ 0.459265] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.459285] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.459374] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.459411] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.459413] system 00:04: [io 0x0200-0x020f] has been reserved
[ 0.459414] system 00:04: [io 0xffff] has been reserved
[ 0.459416] system 00:04: [io 0xffff] has been reserved
[ 0.459418] system 00:04: [io 0x0400-0x0453] has been reserved
[ 0.459420] system 00:04: [io 0x0458-0x047f] has been reserved
[ 0.459421] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.459423] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.459425] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.459454] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.459496] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.459499] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.459543] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.459546] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.459571] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.459601] system 00:09: [io 0x0240-0x0259] has been reserved
[ 0.459604] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.459660] pnp 00:0a: Plug and Play ACPI device, IDs ETD0101 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.459698] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.459855] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.459857] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.459859] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.459861] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.459863] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.459865] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.459867] system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.459869] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.459871] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
[ 0.459873] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.459875] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.459984] pnp: PnP ACPI: found 13 devices
[ 0.459985] ACPI: bus type PNP unregistered
[ 0.466346] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 05-30] add_
Apologies if I wasn't clear on that part. I've tried generating a xorg.conf, even adding sections (like those pertaining to display ID etc) via nvidia-xsettings; making sure it adds sections when the display is being "properly" detected.
Similar Messages
-
GTX 660M black screen after installing driver, maybe a BIOS problem
Hello,
I own a custom PowerPro 11-36 laptop based on a MS-16F23 platform. A few months ago my graphics card died. (A GTX 560M)
I could not afford to buy a new laptop or new graphics card so I replaced it with a second hand GTX 670M 3 GB. It worked fine at first, but after a month this card also died.
About a week ago I received an used GTX 660M from an acquaintance.
I installed it with the new heatsink, started Windows and everything looked OK. Then I installed the Nvidia drivers and after reboot, right after the loading screen, I got a black screen (with the screen still lit).
I went into Safe mode and uninstalled the driver. Then installed again and got the same result. Went into Bios, change settings, tried resetting CMOS, nothing worked. I installed Windows 7 Ultimate again, then Windows 8, same thing. I also tried modding the drivers, still nothing.
I finally connected the laptop to an external monitor and it worked with the Nvidia driver installed. The laptop screen work perfectly without the driver.
Somebody form the Nvidia forum told me that this might be a BIOS problem, so I came here for help. Updating the BIOS is the only thing I haven't tried.
I looked for a fix for this for days now, if anyone can help, I would really appreciate it.
Thank you,
FoxOK, thanks to runningman and to the great people at Power Notebooks I got to the point I am now. I have a MS-16F2-ID1 platform, with this BIOS:
BIOS Version: E16F2IMT.300
BIOS Build: 05/31/2011
EC Version 16F2EG61 Ver4.22
EC Build 04/21/2011
and a Dell (Alienware) GTX 660M video card with original VBIOS that are currently not fully compatible with each other.
By looking around I have found:
- the VBIOS for the Dell GTX 660M at http://www.techpowerup.com/
- a more recent BIOS for my PowerPro R 11:36-560 MSI 937-16F231-004 on the MSI website.
- that the MSI GE60 0ND laptop used to come with the GTX 660M GPU and I have also found a BIOS for this on the MSI website.
I have tried modding the Nvidia driver again, following the indications in the link provided by runningman, but unfortunately it did not solved the problem.
I understand that for this to work, I have to either find, create, or find somebody that can make a modified vbios for the Dell GTX 660M GPU that will make it compatible with my laptop. Or, I could change the BIOS of my laptop in such a way that it would ID the 660M Dell MXM.
This is were I am right now and I have no idea were to go next. As before, any kind of help would be greatly appreciated.
Thanx,
Fox -
Hi
I've got a GE60 0ND with an i7-3630QM @2.4GHz and GTX 660M
Is it okay to overclock the gpu ? How much is appropriate to keep it at safe temps and get a good fps boost?
And would the msi Afterburner suffice for overclocking?
Thanks in advanceI think Afterburner is capable to overclock the GPU, but not a big number gap.
-
After Effects CS6 Graphics Card Nvidia GTX 660M
When will After Effects CS6 work with Nvidia GTX 660M? Will ever work with Nvidia GT 630M? Thank you.
Nobody can tell, but you shouldn't keep your hopes up. These are trimmed down "mobile" cards/ chips and they may never support Raytrace 3D. for the rest refer to the system specs as stated on the product page. what's not listed there, is not supported.
Mylenium -
[Solved] Grub not displaying menu, error messages from grub-mkconfig
Hi I'm new
I have (or rather, am trying to setup) a dual boot with Windows 8.1 and Arch, with each OS on separate SSDs.
Windows 8.1 already installed, Arch installation (seems to have) has gone smoothly. However, when I remove the installation usb, and try to boot, I get a command line prompt:
grub >_
...instead of a menu. I tried typing 'boot', but got 'you need to load the kernel first'. So I cannot access my arch installation without chrooting (or knowing how to compile the kernel in the command line, which I could not find after a lot of searching)
I followed the documentation in the Beginner's Guide and the GRUB page for installing and configuring GRUB. This is UEFI (grub2), not BIOS (grub legacy).
pacman -S grub efibootmgr
grub-install --target=x86S64-efi --efi-directory=/boot --bootloader-id=arch_grub --recheck
No error messages. I also installed os-prober for kicks. When I went to generate the config file (as recommended for beginners), I got a torrent of what I interpreted to be error messages, not just copacetic output:
grub-mkconfig -o /boot/grub/grub.cfg
resulted in:
click this link for error messages
(sorry about the image. I had to shutdown and reboot into my windows partition, since I still can't arch it up. If any/all of you have a better way to reproduce output and feel it pertinent, I'm all ears)
so upon exiting chroot and rebooting, grub boots up to the above effect; no menu is displayed. And I am sad panda.
Background Information:
Partition scheme:
/dev/sda1 - BIOS boot partition (I didn't read carefully, lol)
/dev/sda2 - EFI System Partition - mounted to /mnt/boot when chrooting in
/dev/sda3 - Root partition - mounted to /mnt/ when chrooting in
/dev/sda4 - Home partition - mounted to /mnt/home when chrooting in
The installation and configuration described above was done in chroot with the above partition scheme
I originally had issues booting into UEFI mode with the arch iso (written to a usb stick for the initial install). The boot would hang at 'triggering uevents'. I ultimately fixed this by pressing 'e' in the bootloader menu (also grub, I believe) and prepended
linux /boot/vmlinux-linux root=UUID=978e3e81-8048-4ae1-8a06-aa727458e8ff nomodeset nouveau.modeset=0
It then (successfully triggered uevents? and) booted normally
ALSO:
This is a custom built pc.
Hardware:
intel i7 4930K
ASUS Sabertooth X79 mobo
ASUS GTX 780 Ti gpu
ballistix sport DDR3 RAM (4 x 8 GB)
3 x 128 GB SSD (ADATA P900)
1 x 2 TB HDD (Toshiba, 7200 rpm)
Hey, if you made it to the bottom of this post, I really appreciate you taking the time out of your day. Thank you!
Last edited by Otsdarva (2014-06-09 03:22:25)I realized that since I was not using EFISTUB, I could not mount the ESP to /boot; it had to be /boot/efi. A quick remount-reinstall of grub, then rerunning grub-mkconfig solved the issue.
Also, regarding WonderWoofy's suggestion: I learned by trying gummiboot that for whatever reason the kernel hadn't compiled properly when I ran
pacstrap /mnt base base-devel
Fixed via
pacman -S linux
Thanks for your help, everybody! -
[SOLVED] Incorrect time displayed in my system
Hey Archers,
I have trouble correct time being displayed in my system.
My BIOS time is:
May 18 2012 08:39:21 PM IST
Date command displays
Sat May 19 02:09:59 IST 2012
Clearly the time displayed by date command is localtime+05:30 (Asia/Kolkata), when I expect it to be just localtime.
How do I correct this?
I dont dual boot and have just Arch installed on my machine.
And my /etc/rc.conf has this:
HARDWARECLOCK="UTC"
TIMEZONE="Asia/Kolkata"
Please correct if my understanding is wrong, but is this how it works?
When I say HARDWARECLOCK=UTC and TIMEZONE=''Asia/Kolkata",
It assumes, hardwareclock, time displayed by BIOS, is infact UTC, and, since the user is interested in timezone, +0530, it adds 0530 to hardware clock.
Thanks,
Nachiket.
Last edited by Nachiket (2012-05-19 07:22:47)Hey Tectu,
The wiki article on Time was indeed splendid. It had all the information I needed. Thank you.
Trilby,
You were right, my hardware clock was on local time.
So this is what I did to set it correct.
1. Set the HARDWARECLOCK to "localtime" in /etc/rc.conf
HARDWARECLOCK="localtime"
TIMEZONE="Asia/Kolkata"
2. Reboot the system
3. Set the systemclock to UTC by doing a -0530 (minus 05 hours 30 minutes)
# date `date -d "-05 hours -30 mins" +%m%d%H%M%Y`
4. Copy the system clock value to hardware clock
# hwclock --systohc
5. Edit the /etc/rc.conf to set HARDWARECLOCK back to UTC
HARDWARECLOCK="UTC"
TIMEZONE="Asia/Kolkata"
6. Reboot the system.
And yes, now my system clock displays correct time
Just setting HARDWARECLOCK to "localtime" also worked. But since I the beginners guide recomments "UTC" I did all this.
Marking the thread as SOLVED.
Regards,
Nachiket.
Last edited by Nachiket (2012-05-19 07:23:33) -
[Solved] URXVT cannot display Japanese Characters
Solved:
I had a typo in my locale.conf, setting to an invalid locale - apparently that did it.
Thanks for the help!
Hi everybody!
I just now re-installed Arch because I switched hard-drives (to an SSD) and everything seems to be working again, apart from one thing:
urxvt doesn't display Japanese Characters, just questionmarks instead when using ls and garbage characters otherwise.
I literally copied and pasted my ~/.Xresources from my old install, so I'm not quite sure what went wrong.
This is said file:
Urxvt.urgentOnBell: True
urxvt*cursorBlink: false
!urxvt*internalBorder: 0
!urxvt*externalBorder: 0
URxvt*.depth: 32
URxvt*.background: [85]#000000
! URxvt.scrollstyle: plain
URxvt.scrollBar: false
URxvt.foreground: grey
! red
URxvt.color1: #CC0000
URxvt.color9: #B33838
! blue
URxvt.color4: #3465A4
URxvt.color12: #729FCF
! yellow
Urxvt.color3: #b48363
URxvt.color11: #d49b4e
!URxvt.font: 8x13
urxvt*font: xft:DejaVu Sans Mono:size=8:antialas=true,xft:Kochi Gothic:size=8
This is what fc-list has to say:
% fc-list | grep "Kochi\|DejaVuSansMono"
/usr/share/fonts/TTF/DejaVuSansMono.ttf: DejaVu Sans Mono:style=Book
/usr/share/fonts/TTF/kochi-mincho-subst.ttf: Kochi Mincho,æ±é¢¨ææ:style=Regular,æ¨æº
/usr/share/fonts/TTF/kochi-gothic-subst.ttf: Kochi Gothic,æ±é¢¨ã´ã·ãã¯:style=Regular,æ¨æº
/usr/share/fonts/TTF/DejaVuSansMono-Oblique.ttf: DejaVu Sans Mono:style=Oblique
/usr/share/fonts/TTF/DejaVuSansMono-Bold.ttf: DejaVu Sans Mono:style=Bold
/usr/share/fonts/TTF/DejaVuSansMono-BoldOblique.ttf: DejaVu Sans Mono:style=Bold Oblique
I already tried re-installing the fonts and I also tried out alternative fonts, but nothing seems to work.
All the other settings from the ~/.Xresources file are applied perfectly, so I'm not quite sure where to look for the error.
My browser (dwb) displays japanese characters just fine.
Any help is greatly appreciated
Edit: I just realized that urxvt seems to completely ignore the fonts line - I had that problem once before, when I used the AMD Catalyst driver and not the open source one.
I now have an Nvidia card and started using the propietary driver - maybe that has something to do with it?
Last edited by lorizean (2013-12-02 13:16:14)Works here:
URxvt*depth: 32
URxvt*buffered: true
URxvt*termName: rxvt-256color
URxvt.font: xft:Terminus:pixelsize=12:antialias=false
urxvt.imLocale: pl_PL.ISO8859-2
What's the output of 'localectl'? -
[SOLVED] Switch x displays with script instead of ctrl-alt fx
Hi, I am looking for a way to switch x displays on a computer without using the keyboard. Is this possible with a bash script of some sort?
EDIT: I found chvt but that only works from a tty, running sh chvt X doesn't work from a terminal emulator.
EDIT2: SOLVED: read this http://superuser.com/questions/69807/wh … ot-under-x
Last edited by RiceKills (2010-10-30 18:27:56)chvt command maybe what you need.
-
[SOLVED] Trouble selecting Line-in instead of Mic
I'm trying to use QSSTV to display SSTV signals from my ham radio. The only problem I'm having is that it's listening to my laptop's built-in mic instead of the line-in jack. The input soundcard option in QSSTV is set to default, so I presume I'll have to play around with ALSA to make line-in its default input source.
Please help me here, I'm a bit stuck.
Last edited by phillid (2013-08-04 00:24:15)Hi phillid,
Welcome to Arch Linux. One of the things we ask is that when you regard something as solved, edit the title of your thread and prepend [SOLVED] to the thread title. You do this by editing the first post in the thread. We ask that you do this because you are the only one who really can determine that the problem is solved, and (aside from the moderators) you are the only one who can do that. And -- I hear the moderators are all lazy -
Three displays with GTX 670 -- duplicating desktop problem
Just got a new computer with an Asus GTX 670 card. I am running 3 displays: 1. (Main) Dell U2412M via DVI port, 2. Old Samsung LCD monitor via DVI port with VGA adapter, 3. Samsung 59" plasma TV via HDMI port. I am trying to duplicate the desktop on my TV, but the card will only allow me to extend the desktop to the TV. TV goes blank when I try to duplicate the desktop. I am able to duplicate the desktop on the TV when my third monitor is not connected. My old Samsung monitor displays an extended desktop which is what I want.
If anyone has figured out the workings of this new card, I'd like to know if it is possible to duplicate the desktop on my TV with my setup. ThanksYes, as I mentioned in my post, the GTX will extend the desktop to all 3 displays, that is, I can move a window from the main monitor to either of the other two displays. I am trying to duplicate the desktop on my main monitor to the TV so they show exactly the same thing, as one would do in a presentation with a projector. This is possible if I don't use a third monitor.
-
[SOLVED] KDE konsole display looks broken after upgrading.
Hi,
I just upgraded konsole (:: Replace kdebase-konsole with extra/konsole? [Y/n] ) so it's konsole 2.14.2 -> 3.0.1, and there is many display problems. For example, fonts are not monospaced, the cursor is not aligned with the text, when I execute "ls", files name are incomplete and some filename are over other filename, etc.
I already have ttf-dejavu and ttf-liberation installed.
Do you have any idea on how this append and how to fix this ?
Last edited by lracicot (2015-01-25 01:18:53)arojas wrote:
kralyk wrote:My fonts are allright, but Oxygen doesn't work with konsole.
Well, there are also a few threads about that too.
Pray tell!
EDIT:
I did solve my problem by following the tip about symlinking configuration on the wiki here:
https://wiki.archlinux.org/index.php/KD … nalization
(I was surprised it's not been mentioned in this thread hence this edit.)
Last edited by kralyk (2015-02-11 21:51:13) -
I reccently installed gvim to use as my text editor, but I'm having a bit of trouble seeing text, whitespace, or anything otherwise meaningful on it. I've tried changing the font, setting the encoding to utf8, which helped some people who were having problems with similar rectangles showing up for foreign characters, uninstalling/reinstalling gvim, and pacman -Syu, all to no avail. I explored my logs folder as was suggested in the sticky, but I'm not really sure where I'd find anything that would be helpful.
Vim works just fine.
My display:
http://puu.sh/eo6JT/4a04216ede.jpg
Last edited by vorom (2015-01-14 20:17:48)The picture's an empty file.
The start screen: http://oi59.tinypic.com/2dmca9t.jpg
I hadn't created a .vimrc or a .gvimrc. I stole a user's gvimrc from the internet which read
" 100 columns, 60 lines
:set co=100
:set lines=60
" Use visual bell instead of beeping
:set visualbell
" Use CSS for HTML conversion
:let html_use_css = 1
" Luxi Mono 8 point font
:set gfn=Luxi\ Mono\ 8
and used that one, which did very little. Picture: http://oi57.tinypic.com/2q0ok2a.jpg
Last edited by vorom (2015-01-12 21:17:31) -
[SOLVED] Trouble with Install that I've never seen before (Gnucash)
Hello all! I am rather new to Arch. I came over from Windows (disgruntled up to Win 7). When I first came over to Linux I did so via Ubuntu (12.04 and 13.10) and Mint (16). Seeing that Ubuntu would love to eventually sell us all out I decided to give Arch a try and LOVED IT! The install went smoothly and almost every program that I have needed has installed flawlessly..That is with the exception of Gnucash. I do a lot of freelance bookkeeping work and Gnucash is most definitely the best program I have found out there (even when I was using Windows). I have tried to install from BOTH the official repository and the AUR with no luck. I am using a 64 bit install of Arch on a Dell Inspiron 1440. All of my packages and repositories have been updated through pacman -Syu and -Syy. Below is the results message that I receive when trying to install from EITHER repository (AUR version is what I have posted). It shows that there appear to be two corrupt packages. If any of you can guide me in the right direction as to how to possibly rectify my trouble I would be most appreciative. (Also: if I am posting this in the wrong area please let me know where the better place would be.)
[rick@rick_inspiron1440 builds]$ tar -xf gnucash-latest.tar.gz
[rick@rick_inspiron1440 builds]$ cd gnucash-latest
[rick@rick_inspiron1440 gnucash-latest]$ makepkg -sci
==> Making package: gnucash-latest 2.6.1-1 (Sun Feb 16 14:27:20 EST 2014)
==> Checking runtime dependencies...
==> Installing missing dependencies...
[sudo] password for rick:
resolving dependencies...
looking for inter-conflicts...
Packages (25): gconf-3.2.6-3 gnome-mime-data-2.18.0-6 gnome-vfs-2.24.4-8
guile1.8-1.8.8-3 gwenhywfar-4.3.3-4 ktoblzcheck-1.43-1
libart-lgpl-2.3.21-3 libbonobo-2.32.1-4 libbonoboui-2.24.5-2
libdbi-0.9.0-2 libglade-2.6.4-5 libgnome-2.32.1-4
libgnome-data-2.32.1-4 libgnomecanvas-2.30.3-2
libidl2-0.8.14-3 libofx-0.9.9-1 libxml++-2.36.0-1
opensp-1.5.2-4 orbit2-2.14.19-2 aqbanking-5.0.25-2
goffice0.8-0.8.17-2 gtkhtml-3.32.2-3 libdbi-drivers-0.9.0-2
libgnomeui-2.24.5-1 slib-3b3-3
Total Download Size: 1.28 MiB
Total Installed Size: 88.49 MiB
:: Proceed with installation? [Y/n] y
:: Retrieving packages ...
gtkhtml-3.32.2-3-x86_64 628.7 KiB 724K/s 00:01 [######################] 100%
libdbi-0.9.0-2-x86_64 642.2 KiB 415K/s 00:02 [######################] 100%
libdbi-drivers-0.9.... 35.4 KiB 668K/s 00:00 [######################] 100%
(25/25) checking keys in keyring [######################] 100%
(25/25) checking package integrity [######################] 100%
error: libdbi: signature from "Thorsten Töpper <[email protected]>" is unknown trust
:: File /var/cache/pacman/pkg/libdbi-0.9.0-2-x86_64.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n]
error: libdbi-drivers: signature from "Thorsten Töpper <[email protected]>" is unknown trust
:: File /var/cache/pacman/pkg/libdbi-drivers-0.9.0-2-x86_64.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n]
error: failed to commit transaction (invalid or corrupted package)
Errors occurred, no packages were upgraded.
==> ERROR: 'pacman' failed to install missing dependencies.
Last edited by rightwingrb (2014-02-19 00:28:41)rightwingrb wrote:Also...I have no idea what "code" tags are but hopefully the above is acceptable ;-)
When posting configs, code or command output, please use [ code ] tags https://bbs.archlinux.org/help.php#bbcode
like this
It makes the code more readable and - in case of longer listings - more convenient to scroll through.
Please remember to mark the thread as solved https://bbs.archlinux.org/viewtopic.php?id=130309
Last edited by karol (2014-02-18 22:23:24) -
[SOLVED] Trouble setting up KVM VGA passthrough using vfio
Hi all!
In the past two weeks I've set up my first LFS build using Arch and everything is working great! Well, almost everything.
I'm trying to get a VM set up with vfio for Windows gaming but I'm having trouble and I don't know where to look to fix this... Following this guide: https://bbs.archlinux.org/viewtopic.php?id=162768
I have compiled and am running AUR\linux-vfio, with amd_iommu=on and my processor supports virtualization. pci-stubs holding on to the card to be virtualized.
Cobbled together specs - The 7850 is my host and the 7870 is to be passed to the VM.
OS: Arch Linux
Kernel: x86_64 Linux 4.0.4-2-vfio
CPU: AMD Phenom II X4 955 @ 3.2GHz
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Pitcairn PRO [Radeon HD 7850] [1002:6819]
01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series] [1002:aab0]
02:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Pitcairn XT [Radeon HD 7870 GHz Edition] [1002:6818]
02:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series] [1002:aab0]
When I try to run the test in the linked thread, I get the following:
archdeckstawp% qemu-system-x86_64 -enable-kvm -m 1024 -cpu host,kvm=off \
> -smp 4,sockets=1,cores=4,threads=1 \
> -device vfio-pci,host=02:00.0,x-vga=on -device vfio-pci,host=02:00.1 \
> -vga none
qemu-system-x86_64: -device vfio-pci,host=02:00.0,x-vga=on: vfio: error no iommu_group for device
qemu-system-x86_64: -device vfio-pci,host=02:00.0,x-vga=on: Device initialization failed
qemu-system-x86_64: -device vfio-pci,host=02:00.0,x-vga=on: Device 'vfio-pci' could not be initialized
I checked dmesg and found the following errors, and a patch linked here from Bumblebee, but I don't believe this is the issue so I haven't tried it yet - going to investigate more: https://github.com/Bumblebee-Project/Bu … nt-5804686
archdeckstawp% dmesg | grep vgaarb
[ 0.347409] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.347411] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.347413] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none
[ 0.347415] vgaarb: loaded
[ 0.347416] vgaarb: bridge control possible 0000:02:00.0
[ 0.347417] vgaarb: bridge control possible 0000:01:00.0
[ 17.814588] vgaarb: this pci device is not a vga device
... 22 times ...
[ 17.814761] vgaarb: this pci device is not a vga device
[ 17.814778] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 17.814794] vgaarb: this pci device is not a vga device
... 3 times ...
[ 17.814848] vgaarb: this pci device is not a vga device
For some strange reason I feel like virtualization isn't working on my machine. I've checked the BIOS, virtualization is enabled... I just can't get iommu turned on. Any ideas?
Last edited by SkySky (2015-06-12 01:14:22)So after a bit more research, looks like my motherboard doesn't support IOMMU... http://forums.tweaktown.com/gigabyte/39 … witch.html
[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[ 1.949134] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
[ 1.949136] AMD IOMMUv2 functionality not available on this system
Blah, looks like I have to build a new system (or at least get a new mobo) to get this figured out. I've put in a ticket with gigabyte for my mobo to see if they'll do anything for me, but I doubt it...
I'm hesitant to mark this as solved... would anyone have any ideas on how I could get this working otherwise? -
Trouble with display settings for projector/Reactable
Hi,
I'm trying to install a musical hardware interface called the Reactable for use with my iMac, and I'm having trouble getting the correct display settings. It's designed to work with laptops and it works fine for the most part with my Apple Hackintosh, but I can't seem to get it working correctly with my iMac. The tech support from the Reactable company recommends that I use 1600x1200 resolution or 1024x768 (native) on the projector, but when I open my display settings I am not presented with either of those options. It only permits me to use 1024x768 and 1024x768 (stretched).
The only instance in which I can get the projection to cover the whole table is with 1024x768, but then the projection is too large. Do I need to change the scaling somehow? How do I do that?
Thanks,
Justin1080p. If you have a Mac Mini with an HDMI connector, connect direct through there.
Otherwise you'll need to look at either: Which Macs don't have audio over mini-Displayport connectivity, need either an
Apogee DVI To HDMI Converter / SPDIF Optical Toslink+Coaxial Input Output if you have a mini-DVI or DVI (The left connector is DVI, and the right connector is mini-DVI) connector and it is Intel.
Kanex iAdapt Displayport adaptor if you have a mini-Displayport ( http://upload.wikimedia.org/wikipedia/commons/thumb/4/47/Mini_DisplayPort_on_App le_MacBook.jpg/300px-Mini_DisplayPort_on_Apple_MacBook.jpg
) connector.
Note, thunderbolt connectors look the same as mini-Displayport except they have the lightning icon symbol.
PowerPC Mac Minis, need a StarTech DVI2HDMIA connector together with an RCA minijack to red and white splitter cable.
Maybe you are looking for
-
HTTPS with SessionBean Webservice Endpoint
Any ideas? I'm struggling with the inablilty to specify the entire URL of a webservice endpoint implemented using a session bean. During deployment the URL is always forced to begin with http (i.e. never https). I cannot find anything in the EAR depl
-
Problem using LV 8.0.x with Delcom USB Visual Signal Indicator
This could end up being more of a general question about USB and LabVIEW 8.0.x. I have a USB Visual Signal Indicator from Delcom that doesn't function properly under either LV 8.0 or 8.0.1. I've had to revert back to LV 7.1 where it works fine. Ple
-
Estimating how much temp space a query will take?
I have a query that is "SELECT * FROM some_table ORDER BY field_name DESC". some_table has an avg_row_len of 458 bytes and stats are current. There are just about 6 million rows in some_table. TEMP is set to 500MB and the query fails for lack of TEMP
-
How can I set iPad and iPhone with IOS6 to do not remember wifi and proxy credential
My company want to implement the Password Policy to limit the failure logon count. Such as Lock users if they try logon with invalid password for 3 times. The problem occur on iPad and iPhone my iPad using IOS6. and user had change their password.
-
Error 1324 / Installing Java Runtime
I am trying to install the latest version of Java Runtime Environment on my computer with Windows 2000 and it will not install. An error:1324 The path Documents and Settings has an invalid character and it will not let me install Java. Any suggestion