[SOLVED] Trouble installing with encrypted root system

I'm trying to install with an encrypted root filesystem following the wikiguide: http://wiki.archlinux.org/index.php/Enc … Filesystem
I've downloaded the latest 0.7.1 ISO with 2.6.15-12 kernel.
All I get when I try to intall a bootloader is
Missing/Invalid root partition
Errormsg taken from the top of my head
Any suggestions? Isn't the guide applicable on 0.7.1 / 2.6.15-2-kernel?

It was all my bad.. I somehow forgot to configure a mount for /boot.

Similar Messages

[SOLVED] Trouble installing with ASUS P8B75-M (UEFI) motherboard

I recently built a computer, which has an ASUSTek P8B75-M motherboard, and I can't seem to get past "triggering uevents" on the USB installation disk. After reading up, I'm pretty sure it's a Secure Boot issue, but I can't seem to figure out how exactly I should get it to boot, since nothing I've tried seems to work.
As it is now, here is what I have set for my options:
Secure Boot State: Enabled
Platform Key (PK) state: Loaded
OS Type: Windows UEFI mode (setting it to Other OS doesn't seem to make a difference)
Under the CSM (Compatibility Support Module)
Launch CSM: Enabled
Boot Device Control: UEFI and Legacy OpROM, OpROM Only, UEFI only
Boot from Network Devices: Legacy OpROM first, UEFI driver first, Ignore
Boot from Storage Devices: Both; Legacy OPROM first, Both; UEFI first, Legacy OpROM first, UEFI driver first, Ignore
Boot from PCIe/PCI Expansion Devices: Legacy OpROM first, UEFI driver first
and of course I have Fast Boot Disabled
not sure if it will help, but I also have:
Interrupt 19 Capture: Disabled
POST Delay Time: 3 sec
Option ROM Messages: Force BIOS
Any ideas? I'd go with other threads, but this seems to be organized rather strangely.
also, I'm using Windows 7, not 8.
Last edited by rodaz143 (2014-02-27 22:24:33)

Never mind, I got it working. Note to self, don't use dd for creating bootable USBs

System with encrypted root and random passphrase

Hello,
everybody
I`ve got some question regarding some kind of secure systems.
After a short period of time, i had the idea of a system with some
security constructions in regarding some special situations.
This is as most of the time not really importend for me, but sometimes
i like to think about some very paranoid situations just for fun.
so every critisim is enjoyed and nice to hear.
I know that everything is only as secure as the weakest link, this especially the
case with the higher applications which provide services, increased with a network
and based with the underlying system and the physical access to the hardware.
So it will for sure has flaws, but i try to concentrade myself at this time to
the basics and maybe someone has the knowledge what is possible with an increasing
effort known at this time and possibilities of technology today.
Let`s say i have a system providing some services. It is headless so no physical keylogger
could be implemented. It has a bios protection and can only boot from usb. I`ve got
2 usbsticks. One with an encrypted system which autologin as root and the other usbstick
provides the keyfiles needed that the system will boot at all. The system boots into tmpfs
and then use /dev/random to generate a new long passfrase which becomes the new root-password.
The new password will be written to the second usbstick with a date and maybe other unigue
indicators (seperated from the original keyfile). So the new password is different of the
original booting one. This password is only valid for let`s say 12 hours after that the system
has to be rebooted. Maybe at this point the tmpfs rest storage has to be overwritten with
/dev/zero to delete every entry of the old one. (does the system system crash here? i don`t
know). After that the usbsticks are ejected and keeped save by the maintainer. The system has
also be keeped physical safe -- like in a safe.
So what is the main point here. The system gets a new and automaticaly generated password
every working day. The maintainer has the possibility to access the running maching with the
saved new password. The enemy can`t really insert a permanent access to the system because
of the everday changing password. The maintainer can leave the system alone in the safe,
and is only one who has the the sticks. Two sticks a more secure than one unencrypted.
I think this can also be expanded with a diskless system for more network systems, waiting
with sshd for the passphrase procedure keep everything "live" and every service passphrased
of the user, like files access to another system.
I don`t think that not somebody had the same idea, so there has to be flaws.
Oh and by the way:
How can i forbid that the user can use strg+alt+del to reboot?
How can i see when network cable has been unplugged, maybe with an optical indicator
connected as a serial input to the lights of the switch ot maybe a more electrical way
examined with a serial input connected to the main system?
When i load the / system into a tmpfs i know exactly how big it is (there is no logging i don`t
know the size of a running /tmp ) and i will give it only the exactly size and mount the user tmpfs seperate.
So when the enemy gains user privileges he can only expand the user filesystem space for his
use, but he want to expand the root filesystem , the sytem will crash and maybe reboot, which
could maybe be recognized? Ok if he have root he could hardlink to the userspace. Hmmh i don`t know.
Maybe i should post this thread, but i want to know more.
There are many questions remained, but i am no coder and i will try not to go to far of my
knowledge. So ....
thanks for your answers
and
greetings

Without hacking the encrypt hook, you'll only be able to unlock one volume at the same time. Afaik the device mapper asks for a password for each encrypted partition, and using one for all won't work, you have to repeat the process for each partition, whereas the encrypt hook only seems to be able to handle one partition. You can hack it, but I haven't done that (yet), it's already quite messy you have to hack the hook file to make it apply to non-root partitions.

Solaris 10 Install - with Sun Java System Application Server (8.2)

Hi guys:
What is the reason for Solaris 10 to be installed with the Sun Java System Application Server (8.2). It is a really old version and gets in the way when I install GlassFish 2.1.1
How does on avoid getting it in the install, and how does Sun stop adding it to the distribution?
Thanks
Leonid

Hi guys:
What is the reason for Solaris 10 to be installed with the Sun Java System Application Server (8.2). It is a really old version and gets in the way when I install GlassFish 2.1.1
How does on avoid getting it in the install, and how does Sun stop adding it to the distribution?
Thanks
Leonid

[SOLVED] Trouble installing on SSD with GPT partitioning

Hi there!
I'm trying to install Arch on my brandnew SSD. As per the wiki, I've set the SSD up to use GPT partitioning. I've created a first 1MB partition of type BIOS boot partition, and in the mobo's BIOS I've set the SATA controllers to AHCI mode. I've manually created an ext4 filesystem on the 2nd partition before running arch's installer. In the installer, I chose not to install a boot loader, cause this is said to install GRUB, while GPT partitioning requires GRUB2. So, after installation, I've chrooted into the installation, cause there doesn't seem to be any other way to get GRUB2 installed. I've pacman -Sy'd grub2 and left the chroot. I've tried to run
grub-install --recheck --no-floppy --root-directory=/mnt /dev/sda
, but got
Probing devices to guess BIOS drives. This may take some time.
The file /mnt/boot/grub/stage1 not read correctly
What's the matter? How am I supposed to get a working boot loader onto my new SSD?
Best wishes,
Rufus
Last edited by RufusD (2010-12-19 17:07:21)

Check whether grub-install belongs to grub package or grub2 package. Try to install these updated grub2 packages from here
http://dl.dropbox.com/u/9710721/skodabe … pkg.tar.xz - for x86_64
http://dl.dropbox.com/u/9710721/skodabe … pkg.tar.xz - for i686
http://dl.dropbox.com/u/9710721/skodabe … pkg.tar.xz - any arch
and then follow the post_install instructions from grub2-bios package.
You might have to 'bind' mount /dev into your <chroot>/dev though or install the above packages and install grub2 from outside the chroot.
Last edited by skodabenz (2010-12-13 13:32:51)

[SOLVED] Trouble installing Xmonad and Xmonad-contrib

I am new to Arch Linux. After using awesome for a month I decided to shift to xmonad.I installed xmonad and xmonad-contrib from official arch repositories by using
pacman -S xmonad xmonad-contrib
and then installed GHC. I was able to start session using
exec xmonad
in my ~/.xsession file. I copied the default xmonad.hs template to my home.
cp /usr/share/xmonad-0.11/man/xmonad.hs ~/.xmonad/xmonad.hs
. However while recompiling I am getting this error -
xmonad.hs:14:18:
Could not find module `XMonad.StackSet'
Use -v to see a list of the files searched for.
So I checked the modules in my ghc
[mangat@Noahas_Arch ~]$ ghc-pkg list
/usr/lib/ghc-7.6.2/package.conf.d
Cabal-1.16.0
array-0.4.0.1
base-4.6.0.1
bin-package-db-0.0.0.0
binary-0.5.1.1
bytestring-0.10.0.2
containers-0.5.0.0
deepseq-1.3.0.1
directory-1.2.0.1
filepath-1.3.0.1
ghc-7.6.2
ghc-prim-0.3.0.0
haskell2010-1.1.1.0
haskell98-2.0.0.2
hoopl-3.9.0.0
hpc-0.6.0.0
integer-gmp-0.5.0.0
old-locale-1.0.0.5
old-time-1.1.0.1
pretty-1.1.1.0
process-1.1.0.2
rts-1.0
template-haskell-2.8.0.0
time-1.4.0.1
unix-2.6.0.1
I am now missing xmonad and xmonad-contrib modules, so I tried to reinstall it but I am now getting following error messages :-
[mangat@Noahas_Arch ~]$ su -c "pacman -Sv xmonad xmonad-contrib"
Password:
Root : /
Conf File : /etc/pacman.conf
DB Path : /var/lib/pacman/
Cache Dirs: /var/cache/pacman/pkg/
Lock File : /var/lib/pacman/db.lck
Log File : /var/log/pacman.log
GPG Dir : /etc/pacman.d/gnupg/
Targets : xmonad xmonad-contrib
warning: xmonad-0.11-5 is up to date -- reinstalling
warning: xmonad-contrib-0.11-6 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Packages (2): xmonad-0.11-5 xmonad-contrib-0.11-6
Total Installed Size: 34.13 MiB
Net Upgrade Size: 0.00 MiB
:: Proceed with installation? [Y/n] Y
(2/2) checking keys in keyring [###########################################################] 100%
(2/2) checking package integrity [###########################################################] 100%
(2/2) loading package files [###########################################################] 100%
(2/2) checking for file conflicts [###########################################################] 100%
(2/2) checking available disk space [###########################################################] 100%
ghc-pkg: cannot find package xmonad-0.11
error: command failed to execute correctly
(1/2) reinstalling xmonad [###########################################################] 100%
Reading package info from stdin ... done.
xmonad-0.11: Warning: haddock-interfaces: /usr/share/doc/xmonad-0.11/html/xmonad.haddock doesn't exist or isn't a file
xmonad-0.11: Warning: haddock-html: /usr/share/doc/xmonad-0.11/html doesn't exist or isn't a directory
xmonad-0.11: dependency "X11-1.6.1.1-1d285f3adf4105d51aa29a4bb5b0c634" doesn't exist (use --force to override)
xmonad-0.11: dependency "extensible-exceptions-0.1.1.4-757e1af929bd59fccfe8430149f55bc2" doesn't exist (use --force to override)
xmonad-0.11: dependency "mtl-2.1.2-36ff22533b21e2182d8d4647bfd2b3e7" doesn't exist (use --force to override)
xmonad-0.11: dependency "utf8-string-0.3.7-89a3d8cf53390a43809e108bcfba69ef" doesn't exist (use --force to override)
error: command failed to execute correctly
ghc-pkg: cannot find package xmonad-contrib-0.11
error: command failed to execute correctly
(2/2) reinstalling xmonad-contrib [###########################################################] 100%
Reading package info from stdin ... done.
xmonad-contrib-0.11: Warning: haddock-interfaces: /usr/share/doc/xmonad-contrib-0.11/html/xmonad-contrib.haddock doesn't exist or isn't a file
xmonad-contrib-0.11: Warning: haddock-html: /usr/share/doc/xmonad-contrib-0.11/html doesn't exist or isn't a directory
xmonad-contrib-0.11: dependency "X11-1.6.1.1-1d285f3adf4105d51aa29a4bb5b0c634" doesn't exist (use --force to override)
xmonad-contrib-0.11: dependency "X11-xft-0.3.1-af5f924091c4d4d0e7fd0f1ef1e3e1c5" doesn't exist (use --force to override)
xmonad-contrib-0.11: dependency "extensible-exceptions-0.1.1.4-757e1af929bd59fccfe8430149f55bc2" doesn't exist (use --force to override)
xmonad-contrib-0.11: dependency "mtl-2.1.2-36ff22533b21e2182d8d4647bfd2b3e7" doesn't exist (use --force to override)
xmonad-contrib-0.11: dependency "random-1.0.1.1-048316c239de82db6e182c94b6cf4e19" doesn't exist (use --force to override)
xmonad-contrib-0.11: dependency "utf8-string-0.3.7-89a3d8cf53390a43809e108bcfba69ef" doesn't exist (use --force to override)
xmonad-contrib-0.11: dependency "xmonad-0.11-b1caf0967c016228684d4fbe995fb8d7" doesn't exist (use --force to override)
error: command failed to execute correctly
Any Idea why pacman is unable to resolve the dependency. Are they availiable in AUR?
PS: I have just updated by installation and I am not using AUR right now.
Last edited by mangatmodi (2013-04-23 09:26:14)

@Raynman
My pacman.conf was really in a very bad shape at the time of installation of Xmonad. I think I must be careless to notice and removed dependency check.
When I compiled my xmonad.hs I found errors related to GHC. I was too surprised, however installed it further. Now since GHC was installed later, it missed some modules which were previously installed.
I tried reinstalling xmonad, xmonad-contrib before but there was no use. However recursively removing and installing, as suggested by you, seems to have fixed have problem. I am now getting following modules in GHC.
/usr/lib/ghc-7.6.2/package.conf.d
Cabal-1.16.0
X11-1.6.1.1
X11-xft-0.3.1
array-0.4.0.1
base-4.6.0.1
bin-package-db-0.0.0.0
binary-0.5.1.1
bytestring-0.10.0.2
containers-0.5.0.0
data-default-0.5.1
deepseq-1.3.0.1
directory-1.2.0.1
dlist-0.5
extensible-exceptions-0.1.1.4
filepath-1.3.0.1
ghc-7.6.2
ghc-prim-0.3.0.0
haskell2010-1.1.1.0
haskell98-2.0.0.2
hoopl-3.9.0.0
hpc-0.6.0.0
integer-gmp-0.5.0.0
mtl-2.1.2
old-locale-1.0.0.5
old-time-1.1.0.1
pretty-1.1.1.0
process-1.1.0.2
random-1.0.1.1
rts-1.0
template-haskell-2.8.0.0
time-1.4.0.1
transformers-0.3.0.0
unix-2.6.0.1
utf8-string-0.3.7
xmonad-0.11
xmonad-contrib-0.11
I will test my system and mark the thread solved. Thank you for the help

[SOLVED] Fresh install read only file system

I just did a fresh install of Arch this morning, and I have been trying to fix it most of the day. I was following the Beginner's Guide in the wiki as close as I could. (There were a couple items that didn't quite match up.) I only edited the files that it told me to, and then just minor edits. I checked out /etc/fstab during the process and noticed that none of my hard drives were present. I didn't think this was normal, so I opened another terminal and grabbed the UUIDs with ls -l /dev/disk/by-uuid/. I have two hard drives, but only sda1 (/) and sda2 (swap) showed up. (sdb1 is the entire second hard drive as /home.) Here is the default fstab:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
/dev/cdrom /media/cd auto ro,user,noauto,unhide 0 0
/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
/dev/fd0 /media/fl auto user,noauto 0 0
The example documentation indicated that the file should have lines similair to...
/dev/disk/by-uuid/6334340b-87f1-406e-a777-13210ba85887 / ext3 defaults,noatime,nodirtime 0 1
/dev/disk/by-uuid/5ffd6a40-6d72-4710-82af-ae894e557f89 swap swap defaults 0 0
/dev/disk/by-uuid/32935c6c-6b75-4039-6b69-21f8b805e8f8 /home ext3 defaults,noatime,nodirtime 0 2
...but then I found an example while searching around that showed the lines like this:
UUID=6334340b-87f1-406e-a777-13210ba85887 / ext3 defaults,noatime,nodirtime 0 1
UUID=5ffd6a40-6d72-4710-82af-ae894e557f89 swap swap defaults 0 0
UUID=32935c6c-6b75-4039-6b69-21f8b805e8f8 /home ext3 defaults,noatime,nodirtime 0 2
In the first scenario, everything boots like normal, but when I tried to do anything that required writing to disk, the operation failed with a message about the file system being read-only. (I was trying to edit some config files because I couldn't get online.) Mind you, I was working as root the whole time, because I hadn't even gotten to adding a user yet. The only way I could make changes was to boot a live cd, mount, edit, reboot. remember to remove the live cd, reboot again, repeat.
In the second version of fstab, the bootup process kept trying to check the disk for errors. When it was done it wanted to reboot. Then it tried to check again (presumably because it couldn't save the fact that it had already checked).
I am at a loss. I really wish to use Arch Linux. I've been baby-fed for quite a while on Ubuntu, but it always ran slow. Please somebody help me! I am happy to provide more information; just let me know what you need.
Last edited by ravinggenius (2008-07-05 18:33:22)

Thank you so much for pointing out that typo! Turns out that is what was wrong. Well plus two of uuids had one typo each....
Also from what I can tell it doesn't matter which format I use for the uuids in fstab. I will use the UUID=xxxxx... version unless somebody can tell me why I shouldn't.

Using archboot-2011-10/aif to install an encrypted btrfs system?

Has anyone managed to install a btrfs encrypted system using the latest archboot image? Could we try and make a new entry in the wiki regarding these steps, or if anyone did it using the AIF? I have a 500GB disk and I'm wondering what would be the best layout for my laptop?

AFAIK, there is no fsck tool for btrfs yet. It's apparently on the way. I found out the hard way last summer when my computer froze and required a hard reboot. Trashed the filesystem. It was fast though.

[SOLVED]Trouble installing tiling WM

Ok so iv read the wiki's iv read the board posts and iv googled but i still failed in installing wmii, openbox, and even gnome (i succeeded with xfce4). I thought i had enough skill to handle arch but it seems like i was dead wrong so really my question here today is where did you all accumulate your *nix skill? Iv been using Linux (ubuntu) for a good 2 years now, iv manuals about linux, and im comfortable with the cli but i dont think iv been reading the correct manuals because im not really understanding anything of whats going on when i was trying to configure everything to run properly. So if theres like some super-duper amazing website or book that helped you become "leet" with linux please just post it here. Also i really want to try out a tiling WM just because i love the concept of them and i like things to be small and quick (one of the reasons i left ubuntu) but i cant for the love of god install one correctly so maybe im missing a doc that i should be looking at or maybe i should just re-install arch and start from scratch and see if it was something with my install thats messing everything up for me. so to sum it all up: where can i get more *good* info about linux (arch to be specific) and/or tiling WM's and im sorry if i seem like a total noob (and i know i am) but im just trying to learn more and better myself
Last edited by markbabc (2010-11-09 03:49:57)

ngoonee wrote:
Actually my reading of things is the OP knows how to search and read.
And that's about it?
About the only advise I can give you is to try and understand what you're reading. Don't fall into the trap of "let's copy this whole hunk of script, if it seems to do what I want then yay!". If you can't even install Gnome on Arch successfully, there's 2 possibilities:-
1. You don't understand what you're doing.
2. Your computer/system reveals some corner case bugs.
1 can be fixed. 2 I'm afraid you'd have to live with (its less likely though if you've been using Ubuntu for 2 years...).
I understand what im reading and always try to actually understand what im typing into a terminal before running whatever command. Also im sorry for the crappy OP it was 1:30 AM and i was almost asleep. I think im just going to re-install Arch and see if that helps, i have a feeling i messed up a config file somewhere.

[SOLVED] Trouble Running Ksniffer as root

so i installed ksniffer on my kde desktop... if i run ksniffer it runs fine however when i run sudo ksniffer i get this message and it crashes.
kdeinit: Can't connect to the X Server.
kdeinit: Might not terminate at end of session.
No protocol specified
kded: cannot connect to X server :0
DCOP aborting call from 'anonymous-3509' to 'kded'
kded: ERROR: Communication problem with kded, it probably crashed.
No protocol specified
ksniffer: cannot connect to X server :0
DCOP aborting call from 'anonymous-3500' to 'ksniffer'
ksniffer: ERROR: Communication problem with ksniffer, it probably crashed
not sure how to fix it and have been googleing it all day with no luck i assume its a simple fix but dont know how to
Last edited by nijani (2012-09-27 21:58:25)

well that worked for it to get started... thank you. i still cant seem to get packets from wlan0 but let me make sure its the same problem before i decide its working

[solved] Trouble installing android SDK and eclipse plugin

Hi !
Owner of an HTC hero, I would like to develop some apps for it. However, I have problems to install the android eclipse plugin on my archs (a 32 and a 64 bits) while it is working fine on my roommate's ubuntu...
I'm following these instructions : http://developer.android.com/sdk/eclipse-adt.html
At step 3, when I click OK in order to add the site, just nothing happens, the pop up stays displayed and I can still clic on the bottons, (but only "cancel" do something...) . I've tried to start eclipse from the console, but no output here
Why do you think this happens ?
I have also problem with the sdk tools :
when I try to view the available packages il get :
Failed to fetch URL https://dl-ssl.google.com/android/repos … sitory.xml, reason: HTTPS SSL error. You might want to force download through HTTP in the settings.
(even if I ask to use HTTP insted of HTTPS)
Have you already got this problem?
Thanks,
Fredszaq (from France, escuse english mistakes...)
Last edited by fredszaq (2009-12-02 21:20:13)

found the solution ! it seems to be a GTK problem in fact...
http://groups.google.com/group/android- … 63a8d07cd9
https://bugzilla.gnome.org/show_bug.cgi?id=598734
https://bugs.eclipse.org/bugs/show_bug.cgi?id=290395
the major tip was to resize the windows when notings seems to happen ant to "clik" on the buttons with the enter key ...

[SOLVED] Trouble Installing Flash

I held off on posting anything about this because I was sure I missed something obvious, and I wanted to read everything before asking, but I have no idea how to get Flash to install.
I used pacman -S flashplugin to get the flash plugin from the [multilib] repository, and that worked fine, but Flash still didn't work.
Then I thought to myself, "Wait, I just installed the browser plugin, and not actually the Flash Player. Derp." (Right?) So then I tried to install the Flash plugin. Adobe's website is nigh incomprehensible but I found the Linux installer -- a .tar.gz, so I tried to install it with pacman -U. Then it told me that the package was corrupt and/or missing metadata. Redownloaded it a few times to make sure it wasn't a bum download or something.
I tried the plugin in both Firefox and Chromium, but if I can get it to work in just Chromium I'd be happy (I only installed Firefox to test it).
Last edited by PhoenixFyre (2011-08-16 21:55:09)

The problem (which I somehow managed to miss) was that when trying to install flashplugin, it told me that glibc was not up to date, but flashplugin installed anyway. Glibc couldn't update on its own because its dependency (linux-api-headers) was marked out of date just 6 days ago, without a new version being posted outside of [testing]. So I had to manually upgrade linux-api-headers, then upgrade glibc, then install flashplugin.
Just tested the flashplugin, and it works.

(SOLVED)Trouble installing qt3

When I try to install qt3 with Pacman, i get the error:
error: failed retrieving file 'qt3-3.3.8-19-i686.pkg.tar.xz' from ftp.archlinux.org : File unavailable (e.g., file not found, no access)
I get this for every mirror I try. That "xz" extension looks a little funny to me. Any ideas?
Last edited by nadman10 (2011-05-17 00:51:09)

Always -Syu when installing anything

[SOLVED] Trouble installing Shaman

I'm happy enough with the CLI pacman, I just thought shaman looked kinda cool and worth a try. I downloaded the archive from http://aur.archlinux.org/packages.php?ID=15422 and extracted it. I followed the instructions in the INSTALL file and ran "cmake .", followed by "make", which generates the following errors:
[ 0%] Building CXX object src/CMakeFiles/shaman.dir/MainWindow.o
/home/danny/Downloads/shaman-1.0.9/src/MainWindow.cpp: In member function 'virtual void CreateItemsThread::run()':
/home/danny/Downloads/shaman-1.0.9/src/MainWindow.cpp:114: error: 'alpm_db_getpkgcache' was not declared in this scope
/home/danny/Downloads/shaman-1.0.9/src/MainWindow.cpp: In member function 'bool MainWindow::packageExists(const QString&)':
/home/danny/Downloads/shaman-1.0.9/src/MainWindow.cpp:2164: error: no matching function for call to 'QTreeWidget::findItems(const QString&, QIncompatibleFlag, int)'
/usr/include/QtGui/qtreewidget.h:318: note: candidates are: QList<QTreeWidgetItem*> QTreeWidget::findItems(const QString&, Qt::MatchFlags, int) const
/home/danny/Downloads/shaman-1.0.9/src/MainWindow.cpp: In member function 'void MainWindow::removePackageFromView(const QString&)':
/home/danny/Downloads/shaman-1.0.9/src/MainWindow.cpp:2178: error: no matching function for call to 'QTreeWidget::findItems(const QString&, QIncompatibleFlag, int)'
/usr/include/QtGui/qtreewidget.h:318: note: candidates are: QList<QTreeWidgetItem*> QTreeWidget::findItems(const QString&, Qt::MatchFlags, int) const
/home/danny/Downloads/shaman-1.0.9/src/MainWindow.cpp: In member function 'void MainWindow::doStreamPackages()':
/home/danny/Downloads/shaman-1.0.9/src/MainWindow.cpp:2351: error: 'alpm_db_getpkgcache' was not declared in this scope
make[2]: *** [src/CMakeFiles/shaman.dir/MainWindow.o] Error 1
make[1]: *** [src/CMakeFiles/shaman.dir/all] Error 2
make: *** [all] Error 2
I tried googling some of the errors and only came up with one result that didn't seem to provide any solution...
Last edited by DWilliams (2010-01-29 18:53:45)

tlaloc wrote:shaman is now [community], you don't have use AUR.
Ohhh that's what I get for following outdated guides I guess

[SOLVED] Trouble installing glassfish

I have tried installing glassfish from the AUR but after it said it went all the way to 100%, it says:
/tmp/alpm_zDmJMR/.INSTALL: line 3:
error: el comando falló al ejecutarse
(that's spanish and means: "error: the command failed to execute")
I did the install via yaourt.
Well, I the went to netbeans to see if that error was going to affect me and tried to add glassfish server. I gave netbeans the glassfish path: /opt/glassfish and netbeans tells me:
run setup.xml or setup-cluster.xml before attempting to register
I'm new to glassfish. I've used it a couple of times but it always was embedded in netbeans. I did a google search for the previous errors and also for installing glassfish in arch but no luck this far.
Any help will be appreciated
Last edited by ztrange (2009-09-13 03:15:51)

Hello ztrange!
You can post the error output in english firstly too
Does it work if you install it manually, aurbuild -s or with makepkg without yaourt ?
Last edited by djszapi (2009-08-30 10:56:39)

[SOLVED] Trouble installing with encrypted root system

Similar Messages

Maybe you are looking for