[SOLVED] - Twinkle: why its look is pretty ugly?

I think the best sip program on archlinux it's Twinkle (unfortunately, ekiga sucks ). Leaving the fact that in the extra repo there is an old twinkle version, the application has a very ugly aspect. Do you know a way to improve the appareance, just like on the twinkle site?
I know the program requires Qt libs (3.3.0 or later, but not Qt4).
Twinkle on my desktop:
Twinkle screenshoot from its website:
Last edited by Garret (2009-09-01 09:55:49)

baghera wrote:you should try /opt/bin/qtconfig , that's the utility to config qt3 themes. you can also try to install polymer pkg from community, it's a nice theme.
[garret@desktop ~]$ /opt/bin/qtconfig
bash: /opt/bin/qtconfig: No such file or directory
I installed polymer, but restarting twinkle it's always the same

Similar Messages

TS1292 Hi, can you please take a look at my account and why its asking me to contact support. I have my billing address correct and everything but for some reason its not letting me to authorize my transaction

Hi, can you please take a look at my account and why its asking me to contact support. I have my billing address correct and everything but for some reason its not letting me to authorize my transaction

We are all fellow users here and have no way of accessing your account information; iTunes Store employees do not participate in these forums. You will need to do what it says, contact iTunes Support. Go here:
http://www.apple.com/emea/support/itunes/contact.html
to contact the iTunes Store.
Regards.

Why is iCal leather so ugly?

Seriously, gross tan leather that I can't get rid of? Are you f*ing kidding me? What on earth are they thinking? It's the worst of retro. Like sideburns on a 50-year-old. A graying, paunchy 50-year-old. And my address book too? This is worth dropping Lion for. I can't believe Apple is forcing me to look at faux leather barf every hour of every day. I would never, ever, ever buy a calendar that looks like that. Why are they shoving it down my throat? Barf barf barf. Worst design ever.

serenafox wrote:
Barf barf barf. Worst design ever.
Well, I don't know about that..... speaking as a pauchy 50-year old, the Pontiac Aztek was pretty ugly.
http://www.codinghorror.com/blog/2005/06/the-pontiac-aztek-and-the-perils-of-des ign-by-committee.html
The Lion Tweaks program Grove posted above does a nice job of making your iCal and Address book matchy-matchy with iTunes and all will have a nice aluminum display.
Feel better now?

Plz help why its not compiling ,

hello all i am trying to make the tutorial http://developers.sun.com/mobility/midp/articles/tutorial2/
i have made all the steps once i try to compile it it shows the folowing error:
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Wrapper cannot find servlet class HitServlet or a class it depends on
     at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:836)
     at org.apache.catalina.core.StandardWrapper.allocate(StandardWrapper.java:613)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:164)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:596)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:433)
etc.....
i believe the error has something to do with my classpath thats why its not compiling the HitServlet.java
if anybody can show me plz how to make this following step :
Compiling the Servlet
Compiling servlet code is pretty much the same as for other Java development, except for an important twist. Because the servlet API is not a core part of the Java SE platform, you'll need to add it to your CLASSPATH before you can compile servlets.
The servlet API is contained in common/lib/servlet.jar under the Tomcat root directory. Simply add this file to your CLASSPATH and you will be able to compile HitServlet.java using javac. You can edit the CLASSPATH in the system properties or do it on the command line, as this Windows example demonstrates:
C:\>set CLASSPATH=\jakarta-tomcat-4.1.31\common\lib\servlet.jar
C:\>javac HitServlet.java
i have installed the tomcat and its working fine but i dont understand how to set the classpath , i tried to make it in control panel / system / envirement and put the classpath but its still doesnt work
please help on what i should make in my classpath and how to set it to work if not please notify me where am i making mistake thank you
appreciate a lot help

hello all i am trying to make the tutorial http://developers.sun.com/mobility/midp/articles/tutorial2/
i have made all the steps once i try to compile it it shows the folowing error:
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Wrapper cannot find servlet class HitServlet or a class it depends on
     at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:836)
     at org.apache.catalina.core.StandardWrapper.allocate(StandardWrapper.java:613)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:164)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:596)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:433)
etc.....
i believe the error has something to do with my classpath thats why its not compiling the HitServlet.java
if anybody can show me plz how to make this following step :
Compiling the Servlet
Compiling servlet code is pretty much the same as for other Java development, except for an important twist. Because the servlet API is not a core part of the Java SE platform, you'll need to add it to your CLASSPATH before you can compile servlets.
The servlet API is contained in common/lib/servlet.jar under the Tomcat root directory. Simply add this file to your CLASSPATH and you will be able to compile HitServlet.java using javac. You can edit the CLASSPATH in the system properties or do it on the command line, as this Windows example demonstrates:
C:\>set CLASSPATH=\jakarta-tomcat-4.1.31\common\lib\servlet.jar
C:\>javac HitServlet.java
i have installed the tomcat and its working fine but i dont understand how to set the classpath , i tried to make it in control panel / system / envirement and put the classpath but its still doesnt work
please help on what i should make in my classpath and how to set it to work if not please notify me where am i making mistake thank you
appreciate a lot help

Macbook air Wi Fi and sound stops every time it goes to sleep. i have to restart it every time to use wifi and sounds. this started happening just after the latest upgrade to X. any reasons why its doing that and how to fix it.

Macbook air Wi Fi and sound stops every time it goes to sleep. i have to restart it every time to use wifi and sounds. this started happening just after the latest upgrade to OS X. any reasons why its doing that and how to fix it.

Test after taking each of the following steps. Back up all data before making any changes.
1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved.
2. Follow the instructions in this support article under the heading "Symptom: The network connection drops unexpectedly."
3. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
4. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
5. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
6. In some cases, the problem has been resolved by repairing permissions on the startup volume.
7. Turn off Bluetooth and test.
8. Reinstall OS X.

I want to reset my privacy questions for my apple i.d. But when i request to do so it sends it to a email address that isnt on my file can anyone tell me why its not working?

I want to reset my privacy questions for my apple i.d. But when i request to do so it sends it to a email address that isnt on my file can anyone tell me why its not working?

1) Apple ID: All about Apple ID security questions
Torrifromny wrote:
I want to reset my privacy questions for my apple i.d. But when i request to do so it sends it to a email address that isnt on my file ?
2) See Here. Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
3) Or Email Here > Apple Support iTunes Store Contact

I can't access iCloud, i keep getting a message to try again later. This is the first time i have tried to log into icloud. I know my account is working, i want to access it from my macbook. I think its looking for my old icloud email, what to do?

I can't access iCloud, i keep getting a message to try again later. This is the first time i have tried to log into icloud. I know my account is working, i want to access it from my macbook. I think its looking for my old icloud email, what to do? I have a working apple id, i dont understand, could it be linked to an old account iD?

Hi smccarrison,
Thanks for visiting Apple Support Communities.
You may find the steps in this article helpful with troubleshooting signing into iCloud:
iCloud: Account troubleshooting
http://support.apple.com/kb/TS3988
All the best,
Jeremy

First time buyer on itunes store, its looking for answers to security questions i dont remember answering, what do i do

first time buyer on itunes store, its looking for answers to security questions i dont remember answering, what do i do

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, and filling out and submitting this form.
(96666)

After updating my ios 6 to ios 7 also when i open apps like whatsapp r wechat or adobe reader its screen is still vibrating being blurred and fluctuate... i cdnt undrstand why its so and hw to resolv ths.?????

after updating my ios 6 to ios 7 also when i open apps like whatsapp r wechat or adobe reader its screen is still vibrating being blurred and fluctuate... i cdnt undrstand why its so and hw to resolv ths.????? pls help me

shillshocked wrote:Since version 1.12, LightDM now relies on systemd-logind for seat
management. It means LightDM van load seats automatically as they are added
from logind.
Ha! I searched something like that during my investigations, I was wondering if it wasn't about the recent logind changes, but I gave up due to the lack of documentation

Im trying to load my CS2 PS but its looking for my old copy of PS

Im trying to load my old PS CS2 and its looking for my old disk of 5.5 or higher.. I lost the disk but have the SN# how do i load this. I know in the past Adobe helped me do this..??

When you install the upgrade, the installer will check for a previous qualifying version already installed on your computer. If it cannot detect one, it will ask you to input the serial number for the older software version to verify if it is a valid upgrade.
Once you input the serial number, the installer will use that as a qualifying criteria and continue installation.

HI wat's use of notes and patches in sap why its require..

Hi can anyone give me idea about notes and patches why its required and wat's its effect in technical side and in functional side also..
Thanks & Regards,
Nainesh.

Sorry,The print did not come.
In order to fix one of the problem in R/3 system, SAP will asked you to download an OSS notes which is a ".car" file.
To work with a CAR File do the following at OS Level:
Get into OS as <sapsid>adm
Copy the .CAR file to a Temporary Directory.
Uncompress the file with SAPCAR
Copy the the data file generated in the data transport directory
( ej: = /usr/Sap/trans/data).
Copy the the cofile file generated in the cofiles transport directory
( = ej: /usr/Sap/trans/cofiles).
Run transaction STMS
Upload the support package with SPAM transaction and the support package will show "New support packages".
Examples of CAR command :-
   1) UNIX only:
       Log on as user <sapsid>adm.
       cd /usr/sap/trans
       CAR -xvf tmp/<ARCHIVE_NAME>.CAR -V
   2) Windows NT only:
       Log on as user <SAPSID>ADM.
       cd \USR\SAP\TRANS
       CAR -xvf TMP\<ARCHIVE_NAME>.CAR
This Will create two(2) FILES
After you run SPAM you MUST run STMS and check the transport queues
As per 315963 note you can direct made the changes in the program or you can apply the support pack.
a) If you want to apply correction then first you need to register the object in SAP, so that you will get the Access key and then you can make the changes.
b) If you want to import the support pack then you need to down load from SAP market-place. and this is in CAR file. and then you need extract the same using CAR utility.
ex: CAR -xvf abc.car
or
you can directly apply the patch from SAPGUI, login to 000 client and then you can load the patch from Presentation server.
Also check what is your current basis patch level?
For example if you want to apply patch 07 and you are having 05 then you need to apply 06 and then apply 07.
Things to take note of:-
It would definitely be better to apply the latest spam/saint spam manager, tp, R3trans and possibly a new kernel patch.
This is not a simple task to complete on the fly. By applying SAP support packs, you may run into problems with SPDD and SPAU adjustments. Also include the fact that the support packages may break one of your transactions. You may want to test this in your sandbox environment, if you have one, before tackling it.
In most situation when you apply support packages, it can takes about 3 weeks to fully test the support packages before you can apply them to the production system.
Do test your "golden" transactions to make sure that they are not broken. If you are not familiar with SPDD and/or SPAU adjustments than do not attempt to load support packages.
You may be better off just to modify the SAP object in question via OSS note.

Can i change apple id to update a game? if its possible how i can change it? if its not possible why in this generation why its not possible?

can i change apple id to update a game? if its possible how i can change it? if its not possible why in this generation why its not possible?

You can't. All apps, and any other content from the store, are tied to the account that downloaded them, and they will remain tied to that account - so only the account that bought/downloaded an app can download updates to an app. Are you having problems downloading an app update via the app's own account ?

The screen to my i pad stay in gry coler and i cannot change the page its look frozen

the screen to my i pad 2 stay in gray color and i cannot change the page even back er forword in internet page.its look frozen

Try clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

I could not update my apps on my phone this morning,it told me my account was locked for security reasons ??to vist iforgot and reset my account and its looking for all my details again ,i have credit in my account,can you help

i could not update my apps on my phone this morning,it told me my account was locked for security reasons ??to vist iforgot and reset my account and its looking for all my details again ,i have credit in my account,can you help

Apple ID- "This Apple ID has been disabled for security reasons" alert appears

When i try and open itunes a memo pops up saying "itunes could not connect to this iPhone. This device is no longer connected" my iphone is not plugged into my mac so i dont know why its mentioning an iphone nor why i cant open my itunes library

when i try and open itunes a memo pops up saying "itunes could not connect to this iPhone. This device is no longer connected" my iphone is not plugged into my mac so i dont know why its mentioning an iphone nor why i cant open my itunes library?

Each time you connect your iPhone to iTunes, you need to eject it before closing iTunes by clicking on the little "eject" icon shown in iTunes. It seems that sometime in the past, you did not do that.
I'm not sure how to undo the previously done damage, but maybe a reboot of your Mac would help.

[SOLVED] - Twinkle: why its look is pretty ugly?

Similar Messages

Maybe you are looking for