[SOLVED] udev-145 and gnome automount

Hi!
I tried using udev-145, mainly for networmanager latest version which requires it, however before I even got to using new NM I noticed that my USB flash keys, mp3 player etc. doesn't show up in gnome, dmesg shows new devices and stuff, but they aren't automounted
Is this a known problem or I'm sort of missing smth?
regards
Kirurgs
Last edited by Kirurgs (2009-08-10 11:20:21)

Nope, but if this is known as "must have along with new udev" I'll do that...
Thanks for clue, will report back with results.
Is anything else is needed from testing?
P.S. I'm trying not to install anything from testing anyway, just packages that I have to have to fix some problems with other packages Currently I have some problem with NM, so I'm trying to fix that by compiling it form git which requires udev>143 or so.
EDIT: It works! Everything is auto-mounted! Thanx a lot... I wonder why it's not in dependencies
Last edited by Kirurgs (2009-08-10 11:19:54)

Similar Messages

  • [SOLVED]Udev: How to easily automount usb/storage devices?...

    Hello there everyone, first time posting here.
    So as for my question, I recently finished up my preferred install for arch but I have just one problem. Can't seem to get Udev working right.
    Before I was using debian with the same Udev automount rules posted in the wiki actually. Then I tried the same ones migrating to arch but they don't seem to work. After searching for my netbook, getting the runaround, then searching for an alternative method and getting the same it's getting kind of annoying. So here I am.
    I'm running Arch with LXDE and all default DE components(PCmanFM, openbox, etc). I don't have HAL installed, only udisks and udev as PnP support. Any help?
    (Also in specific, I was using the second rule in the Udev wiki page. The one with LUKS support)
    (Ah, nevermind is was just a tiny bit of a syntax error. A little bit more googling helped me find the answer)
    Last edited by jjsullivan (2011-02-10 09:03:33)

    v43 wrote:i'll tell you anyway
    my choice was autofs (+hal). no volume managers.
    it works like a charm with thunar (and pcmanfm too).
    Its nice that you told anyway, solved my problem

  • [SOLVED]HDMI audio and gnome volume applet issues

    Hi all,
    After setting up Arch without too many problems came the real pain in the ass: HDMI audio over a Asus NVIDIA GeForce EN210....
    Eventually I got everything to work with the help of the ASLA en Pulse wiki pages, but I found the last piece of the puzzle here:
    http://wiki.xbmc.org/index.php?title=HO … ,_or_GT240
    Maybe this is useful for others too.
    The only problem I have now is that the ALSA deamon fails to load. I found this in the boot log file (/var/log/boot):
    Thu Apr 12 13:54:19 2012: :: Restoring ALSA Levels    [BUSY] Found hardware: "HDA-Intel" "Nvidia GPU 0b HDMI/DP" "HDA:10de000b,10de0101,00100200" "0x1043" "0x8343"
    Thu Apr 12 13:54:20 2012: Hardware is initialized using a generic method
    Does this mean I don't need the alsa deamon anymore? Sound still works normally after boot but a strange thing is that I can turn up and down the volume with the gnome shell volume applet but the volume of media applications like vlc do not react. Same problem with flash video's like youtube. I do hear the "blip" sound from the applet.
    Does anyone have ideas how to fix this?
    Last edited by Jurry (2012-04-26 23:46:31)

    yeah have the samre problem, adjusting sound in Amarok doesn't change anything.... happened after the last udev update, here is my bootup log :
    Sat Apr 14 17:28:55 2012: :: Adjusting system time and setting kernel timezone    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Starting UDev Daemon    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Triggering UDev uevents    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Loading User-specified Modules    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Waiting for UDev uevents to be processed    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Bringing up loopback interface    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Unlocking encrypted volumes:    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Checking Filesystems    [BUSY] /dev/sda1: clean, 29/40160 files, 24631/160616 blocks
    Sat Apr 14 17:28:55 2012: /dev/sda4: clean, 76872/18530304 files, 16371381/74101820 blocks
    Sat Apr 14 17:28:55 2012:    [DONE]
    Sat Apr 14 17:28:55 2012: :: Remounting Root    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Mounting Local Filesystems    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Activating Swap    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Configuring Time Zone    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Initializing Random Seed    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Removing Leftover Files    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Setting Hostname: Nashed    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Setting Consoles to UTF-8 mode    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Loading Keyboard Map: us    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Saving dmesg Log    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: INIT: Entering runlevel: 5
    Sat Apr 14 17:28:55 2012: :: Starting Syslog-NG    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Starting Network    [BUSY]    [DONE]
    Sat Apr 14 17:29:26 2012: :: Starting net-profiles    [BKGD]
    Sat Apr 14 17:29:26 2012: :: Mounting Network Filesystems    [BUSY]    [DONE]
    Sat Apr 14 17:29:26 2012: :: Starting crond daemon    [BUSY]    [DONE]
    Sat Apr 14 17:29:26 2012: :: Restoring ALSA Levels    [BUSY] Found hardware: "HDA-Intel" "Realtek ALC888" "HDA:10ec0888,80860024,00100202" "0x8086" "0x0024"
    Sat Apr 14 17:29:26 2012: Hardware is initialized using a generic method
    Sat Apr 14 17:29:26 2012:    [FAIL]
    Sat Apr 14 17:29:26 2012: :: Starting D-BUS system messagebus    [BUSY]    [DONE]
    I hope it helps identify the problem

  • [SOLVED]Removing enlightenment and gnome...

    Apologies if this has been posted already, I did a little search but couldn't find anything.
    I installed arch a couple of weeks ago with enlightenment, to me it looked by far the most advanced environment to use. However there's hardly any support! They have a mailing list instead of a forum, is this 1994?
    So I went and installed gnome, but it's not starting.
    I just want to get rid of all of it now, gnome, enlightenment, all the rubbish along with it and install openbox then go from there.
    I don't want my comp filled with random rubbish and I worry that it may be at the point where it's more beneficial to reinstall arch and start again but I know you good folks on the forum can help me avoid that monumental nooby stress that comes packaged with arch.
    Cheers!
    Last edited by jpjenkins (2014-04-03 18:58:31)

    Thanks, I was concerned about the dependencies not removing, it makes sense to just -R the original installation!
    I didn't make any effort at all henk, it's not the reason why I want to uninstall though. When gnome 3.12 is packaged up I'll give it a shot. For now, a simple window manager will suffice while I fine tune the engine.
    Thanks guys.

  • [solved/cannot be solved]Xorg-server and gnome-power-manager

    I was wondering if there is hope that someone will put patches to main tree of Xorg-server which are here: http://blogs.gnome.org/hughsie/2009/08/ … of-bodges/
    It should remove this weird blanking effect and time gap before screen is backlighted again. I didn't tested it, because it requires rebuild of xorg-server and I don't want to use git version, but guys there says that it's working.
    Last edited by megawebmaster (2010-02-08 22:24:26)

    OK, thanks for advice, I'll try building xorg-server with ABS.
    I've got another problem with automatic turn off screen - media players don't prevent turning screen off while they are playing film. Is there any possibility to fix it? Only way I've found is to turn off automatic screen backlight off after couple of minutes, but it's not how tigers want this to work

  • [SOLVED] After upgrade gdm and Gnome don't work.

    Hi,
    after I did an upgrade I had some ldconfig: errors and fixed them all using pkgfile and reinstallation of quite some packages.
    But now starting gdm with
    # systemctl start gdm
    only leads to a black screen with a cross shaped cursor I can move. Nothing more.
    Xorg works -- I'm writing this post from KDE.
    I reinstalled gnome and gnome-extra. Still no success.
    System is up to date.
    Hopefully my logs will help, I have no idea what to do. Thanks for any help. :)
    /var/log/Xorg.0.log
    [ 384.588]
    X.Org X Server 1.14.1
    Release Date: 2013-04-17
    [ 384.588] X Protocol Version 11, Revision 0
    [ 384.588] Build Operating System: Linux 3.8.7-1-ARCH x86_64
    [ 384.588] Current Operating System: Linux rolfgang 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64
    [ 384.588] Kernel command line: cryptdevice=/dev/sda2:main root=/dev/mapper/main-root lang=de locale=de_DE.UTF-8 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
    [ 384.588] Build Date: 17 April 2013 02:37:06PM
    [ 384.588]
    [ 384.588] Current version of pixman: 0.30.0
    [ 384.588] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 384.588] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 384.589] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 9 00:18:24 2013
    [ 384.589] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 384.589] (==) No Layout section. Using the first Screen section.
    [ 384.589] (==) No screen section available. Using defaults.
    [ 384.589] (**) |-->Screen "Default Screen Section" (0)
    [ 384.589] (**) | |-->Monitor "<default monitor>"
    [ 384.590] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 384.590] (**) | |-->Device "Intel Graphics"
    [ 384.590] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 384.590] (==) Automatically adding devices
    [ 384.590] (==) Automatically enabling devices
    [ 384.590] (==) Automatically adding GPU devices
    [ 384.590] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 384.590] Entry deleted from font path.
    [ 384.590] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 384.590] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/
    [ 384.590] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 384.590] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 384.590] (II) Loader magic: 0x7fcc20
    [ 384.590] (II) Module ABI versions:
    [ 384.590] X.Org ANSI C Emulation: 0.4
    [ 384.590] X.Org Video Driver: 14.1
    [ 384.590] X.Org XInput driver : 19.1
    [ 384.590] X.Org Server Extension : 7.0
    [ 384.591] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 384.594] (--) PCI:*(0:0:2:0) 8086:0166:144d:c0d3 rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00003000/64
    [ 384.594] Initializing built-in extension Generic Event Extension
    [ 384.594] Initializing built-in extension SHAPE
    [ 384.594] Initializing built-in extension MIT-SHM
    [ 384.594] Initializing built-in extension XInputExtension
    [ 384.594] Initializing built-in extension XTEST
    [ 384.594] Initializing built-in extension BIG-REQUESTS
    [ 384.594] Initializing built-in extension SYNC
    [ 384.594] Initializing built-in extension XKEYBOARD
    [ 384.594] Initializing built-in extension XC-MISC
    [ 384.594] Initializing built-in extension SECURITY
    [ 384.594] Initializing built-in extension XINERAMA
    [ 384.594] Initializing built-in extension XFIXES
    [ 384.594] Initializing built-in extension RENDER
    [ 384.594] Initializing built-in extension RANDR
    [ 384.594] Initializing built-in extension COMPOSITE
    [ 384.594] Initializing built-in extension DAMAGE
    [ 384.594] Initializing built-in extension MIT-SCREEN-SAVER
    [ 384.594] Initializing built-in extension DOUBLE-BUFFER
    [ 384.594] Initializing built-in extension RECORD
    [ 384.595] Initializing built-in extension DPMS
    [ 384.595] Initializing built-in extension X-Resource
    [ 384.595] Initializing built-in extension XVideo
    [ 384.595] Initializing built-in extension XVideo-MotionCompensation
    [ 384.595] Initializing built-in extension XFree86-VidModeExtension
    [ 384.595] Initializing built-in extension XFree86-DGA
    [ 384.595] Initializing built-in extension XFree86-DRI
    [ 384.595] Initializing built-in extension DRI2
    [ 384.595] (II) LoadModule: "glx"
    [ 384.595] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 384.595] (II) Module glx: vendor="X.Org Foundation"
    [ 384.595] compiled for 1.14.1, module version = 1.0.0
    [ 384.595] ABI class: X.Org Server Extension, version 7.0
    [ 384.595] (==) AIGLX enabled
    [ 384.596] Loading extension GLX
    [ 384.596] (II) LoadModule: "intel"
    [ 384.596] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 384.596] (II) Module intel: vendor="X.Org Foundation"
    [ 384.596] compiled for 1.14.1, module version = 2.21.9
    [ 384.596] Module class: X.Org Video Driver
    [ 384.596] ABI class: X.Org Video Driver, version 14.1
    [ 384.596] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
    Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
    Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
    Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
    Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
    HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
    Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
    Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
    Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
    Haswell SDV Server (GT2), Haswell SDV Server (GT3),
    Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
    Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
    Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
    Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
    HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
    Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
    Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
    Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
    Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
    HD Graphics 4600, Iris(TM) Pro Graphics 5200,
    Haswell CRW Server (GT1), Haswell CRW Server (GT2),
    Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
    Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
    Iris(TM) Pro Graphics 5200, ValleyView PO board
    [ 384.597] (++) using VT number 1
    [ 384.602] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 384.602] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 384.602] (==) intel(0): RGB weight 888
    [ 384.602] (==) intel(0): Default visual is TrueColor
    [ 384.602] (**) intel(0): Option "AccelMethod" "sna"
    [ 384.603] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
    [ 384.603] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
    [ 384.603] (**) intel(0): Framebuffer tiled
    [ 384.603] (**) intel(0): Pixmaps tiled
    [ 384.603] (**) intel(0): "Tear free" disabled
    [ 384.603] (**) intel(0): Forcing per-crtc-pixmaps? no
    [ 384.604] (II) intel(0): Output eDP1 has no monitor section
    [ 384.604] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
    [ 384.605] (II) intel(0): Output VGA1 has no monitor section
    [ 384.605] (II) intel(0): Output HDMI1 has no monitor section
    [ 384.605] (II) intel(0): Output DP1 has no monitor section
    [ 384.606] (II) intel(0): EDID for output eDP1
    [ 384.606] (II) intel(0): Manufacturer: SEC Model: 3546 Serial#: 0
    [ 384.606] (II) intel(0): Year: 2011 Week: 0
    [ 384.606] (II) intel(0): EDID Version: 1.4
    [ 384.606] (II) intel(0): Digital Display Input
    [ 384.606] (II) intel(0): 8 bits per channel
    [ 384.606] (II) intel(0): Digital interface is DisplayPort
    [ 384.606] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16
    [ 384.606] (II) intel(0): Gamma: 2.20
    [ 384.606] (II) intel(0): No DPMS capabilities specified
    [ 384.606] (II) intel(0): Supported color encodings: RGB 4:4:4
    [ 384.606] (II) intel(0): First detailed timing is preferred mode
    [ 384.606] (II) intel(0): Preferred mode is native pixel format and refresh rate
    [ 384.606] (II) intel(0): redX: 0.590 redY: 0.340 greenX: 0.330 greenY: 0.540
    [ 384.606] (II) intel(0): blueX: 0.155 blueY: 0.135 whiteX: 0.313 whiteY: 0.329
    [ 384.606] (II) intel(0): Manufacturer's mask: 0
    [ 384.606] (II) intel(0): Supported detailed timing:
    [ 384.606] (II) intel(0): clock: 100.4 MHz Image Size: 293 x 165 mm
    [ 384.606] (II) intel(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1792 h_border: 0
    [ 384.606] (II) intel(0): v_active: 900 v_sync: 902 v_sync_end 907 v_blanking: 932 v_border: 0
    [ 384.606] (II) intel(0): Unknown vendor-specific block f
    [ 384.606] (II) intel(0): SAMSUNG
    [ 384.606] (II) intel(0): LSN133KL018
    [ 384.606] (II) intel(0): EDID (in hex):
    [ 384.606] (II) intel(0): 00ffffffffffff004ca3463500000000
    [ 384.606] (II) intel(0): 00150104a51d10780209e59757548a27
    [ 384.606] (II) intel(0): 22505400000001010101010101010101
    [ 384.606] (II) intel(0): 010101010101382740c0608420303020
    [ 384.606] (II) intel(0): 250025a5100000190000000f00000000
    [ 384.606] (II) intel(0): 000000000028800a1e00000000fe0053
    [ 384.606] (II) intel(0): 414d53554e470a2020202020000000fe
    [ 384.606] (II) intel(0): 004c534e3133334b4c3031380a200003
    [ 384.606] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 384.606] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 384.606] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 384.606] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 384.606] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 384.606] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 384.606] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 384.606] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 384.606] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 384.606] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 384.606] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 384.606] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    [ 384.606] (II) intel(0): Printing probed modes for output eDP1
    [ 384.606] (II) intel(0): Modeline "1600x900"x60.1 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
    [ 384.606] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
    [ 384.606] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
    [ 384.606] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
    [ 384.606] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
    [ 384.608] (II) intel(0): EDID for output VGA1
    [ 384.608] (II) intel(0): EDID for output HDMI1
    [ 384.608] (II) intel(0): EDID for output DP1
    [ 384.608] (II) intel(0): Output eDP1 connected
    [ 384.608] (II) intel(0): Output VGA1 disconnected
    [ 384.608] (II) intel(0): Output HDMI1 disconnected
    [ 384.608] (II) intel(0): Output DP1 disconnected
    [ 384.608] (II) intel(0): Using exact sizes for initial modes
    [ 384.608] (II) intel(0): Output eDP1 using initial mode 1600x900
    [ 384.608] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 384.608] (==) intel(0): DPI set to (96, 96)
    [ 384.608] (II) Loading sub module "dri2"
    [ 384.608] (II) LoadModule: "dri2"
    [ 384.608] (II) Module "dri2" already built-in
    [ 384.608] (==) Depth 24 pixmap format is 32 bpp
    [ 384.608] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
    [ 384.608] (==) intel(0): Backing store disabled
    [ 384.608] (==) intel(0): Silken mouse enabled
    [ 384.608] (II) intel(0): HW Cursor enabled
    [ 384.608] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 386.414] (==) intel(0): DPMS enabled
    [ 386.414] (II) intel(0): [DRI2] Setup complete
    [ 386.414] (II) intel(0): [DRI2] DRI driver: i965
    [ 386.414] (II) intel(0): direct rendering: DRI2 Enabled
    [ 386.414] (==) intel(0): hotplug detection: "enabled"
    [ 386.415] (--) RandR disabled
    [ 386.430] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 386.430] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 386.430] (II) AIGLX: enabled GLX_ARB_create_context
    [ 386.430] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 386.430] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 386.430] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 386.430] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 386.430] (II) AIGLX: Loaded and initialized i965
    [ 386.430] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 386.430] (II) intel(0): switch to mode 1600x900 on pipe 0 using eDP1
    [ 386.446] (II) intel(0): Setting screen physical size to 423 x 238
    [ 386.508] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 386.508] (**) Power Button: Applying InputClass "system-keyboard"
    [ 386.508] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 386.508] (II) LoadModule: "evdev"
    [ 386.509] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 386.509] (II) Module evdev: vendor="X.Org Foundation"
    [ 386.509] compiled for 1.14.0, module version = 2.8.0
    [ 386.509] Module class: X.Org XInput Driver
    [ 386.509] ABI class: X.Org XInput driver, version 19.1
    [ 386.509] (II) Using input driver 'evdev' for 'Power Button'
    [ 386.509] (**) Power Button: always reports core events
    [ 386.509] (**) evdev: Power Button: Device: "/dev/input/event4"
    [ 386.509] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 386.509] (--) evdev: Power Button: Found keys
    [ 386.509] (II) evdev: Power Button: Configuring as keyboard
    [ 386.509] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
    [ 386.510] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 386.510] (**) Option "xkb_rules" "evdev"
    [ 386.510] (**) Option "xkb_model" "evdev"
    [ 386.510] (**) Option "xkb_layout" "de"
    [ 386.535] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
    [ 386.535] (**) Video Bus: Applying InputClass "system-keyboard"
    [ 386.535] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 386.535] (II) Using input driver 'evdev' for 'Video Bus'
    [ 386.535] (**) Video Bus: always reports core events
    [ 386.535] (**) evdev: Video Bus: Device: "/dev/input/event10"
    [ 386.535] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 386.535] (--) evdev: Video Bus: Found keys
    [ 386.535] (II) evdev: Video Bus: Configuring as keyboard
    [ 386.535] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10/event10"
    [ 386.535] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 386.535] (**) Option "xkb_rules" "evdev"
    [ 386.535] (**) Option "xkb_model" "evdev"
    [ 386.535] (**) Option "xkb_layout" "de"
    [ 386.536] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 386.536] (**) Power Button: Applying InputClass "system-keyboard"
    [ 386.536] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 386.536] (II) Using input driver 'evdev' for 'Power Button'
    [ 386.536] (**) Power Button: always reports core events
    [ 386.536] (**) evdev: Power Button: Device: "/dev/input/event3"
    [ 386.536] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 386.536] (--) evdev: Power Button: Found keys
    [ 386.536] (II) evdev: Power Button: Configuring as keyboard
    [ 386.536] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3"
    [ 386.536] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
    [ 386.536] (**) Option "xkb_rules" "evdev"
    [ 386.536] (**) Option "xkb_model" "evdev"
    [ 386.536] (**) Option "xkb_layout" "de"
    [ 386.536] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
    [ 386.536] (II) No input driver specified, ignoring this device.
    [ 386.536] (II) This device may have been added with another device file.
    [ 386.537] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 386.537] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event5)
    [ 386.537] (II) No input driver specified, ignoring this device.
    [ 386.537] (II) This device may have been added with another device file.
    [ 386.538] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event6)
    [ 386.538] (II) No input driver specified, ignoring this device.
    [ 386.538] (II) This device may have been added with another device file.
    [ 386.538] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event7)
    [ 386.538] (II) No input driver specified, ignoring this device.
    [ 386.538] (II) This device may have been added with another device file.
    [ 386.539] (II) config/udev: Adding input device Webcam SC-13HDL11624N (/dev/input/event8)
    [ 386.539] (**) Webcam SC-13HDL11624N: Applying InputClass "system-keyboard"
    [ 386.539] (**) Webcam SC-13HDL11624N: Applying InputClass "evdev keyboard catchall"
    [ 386.539] (II) Using input driver 'evdev' for 'Webcam SC-13HDL11624N'
    [ 386.539] (**) Webcam SC-13HDL11624N: always reports core events
    [ 386.539] (**) evdev: Webcam SC-13HDL11624N: Device: "/dev/input/event8"
    [ 386.539] (--) evdev: Webcam SC-13HDL11624N: Vendor 0x2232 Product 0x1024
    [ 386.539] (--) evdev: Webcam SC-13HDL11624N: Found keys
    [ 386.539] (II) evdev: Webcam SC-13HDL11624N: Configuring as keyboard
    [ 386.539] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input8/event8"
    [ 386.539] (II) XINPUT: Adding extended input device "Webcam SC-13HDL11624N" (type: KEYBOARD, id 9)
    [ 386.539] (**) Option "xkb_rules" "evdev"
    [ 386.539] (**) Option "xkb_model" "evdev"
    [ 386.539] (**) Option "xkb_layout" "de"
    [ 386.540] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 386.540] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
    [ 386.541] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 386.541] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 386.541] (**) AT Translated Set 2 keyboard: always reports core events
    [ 386.541] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 386.541] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 386.541] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 386.541] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 386.541] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 386.541] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
    [ 386.541] (**) Option "xkb_rules" "evdev"
    [ 386.541] (**) Option "xkb_model" "evdev"
    [ 386.541] (**) Option "xkb_layout" "de"
    [ 386.542] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event9)
    [ 386.542] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
    [ 386.542] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
    [ 386.542] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
    [ 386.542] (**) ETPS/2 Elantech Touchpad: Applying InputClass "disable clickpad buttons"
    [ 386.542] (II) LoadModule: "synaptics"
    [ 386.542] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 386.543] (II) Module synaptics: vendor="X.Org Foundation"
    [ 386.543] compiled for 1.14.1, module version = 1.7.1
    [ 386.543] Module class: X.Org XInput Driver
    [ 386.543] ABI class: X.Org XInput driver, version 19.1
    [ 386.543] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
    [ 386.543] (**) ETPS/2 Elantech Touchpad: always reports core events
    [ 386.543] (**) Option "Device" "/dev/input/event9"
    [ 386.563] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
    [ 386.563] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2964 (res 33)
    [ 386.563] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1872 (res 32)
    [ 386.564] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
    [ 386.564] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
    [ 386.564] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
    [ 386.564] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
    [ 386.564] (**) Option "TapButton1" "1"
    [ 386.564] (**) Option "TapButton2" "2"
    [ 386.564] (**) Option "TapButton3" "3"
    [ 386.564] (**) Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
    [ 386.564] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
    [ 386.564] (**) ETPS/2 Elantech Touchpad: always reports core events
    [ 386.570] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
    [ 386.570] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 11)
    [ 386.570] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
    [ 386.571] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
    [ 386.571] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.057
    [ 386.571] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
    [ 386.571] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
    [ 386.571] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
    [ 386.571] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
    [ 386.571] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
    [ 386.572] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
    [ 386.572] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
    [ 386.573] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
    [ 386.573] (II) No input driver specified, ignoring this device.
    [ 386.573] (II) This device may have been added with another device file.
    [ 386.899] (II) intel(0): EDID vendor "SEC", prod id 13638
    [ 386.899] (II) intel(0): Printing DDC gathered Modelines:
    [ 386.899] (II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
    [ 387.041] (II) intel(0): EDID vendor "SEC", prod id 13638
    [ 387.041] (II) intel(0): Printing DDC gathered Modelines:
    [ 387.041] (II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
    [ 387.069] (II) intel(0): EDID vendor "SEC", prod id 13638
    [ 387.069] (II) intel(0): Printing DDC gathered Modelines:
    [ 387.069] (II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
    [ 389.740] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 391.348] (II) AIGLX: Resuming AIGLX clients after VT switch
    [ 391.348] (II) intel(0): switch to mode 1600x900 on pipe 0 using eDP1
    [ 391.367] (II) intel(0): EDID vendor "SEC", prod id 13638
    [ 391.367] (II) intel(0): Printing DDC gathered Modelines:
    [ 391.367] (II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
    [ 391.369] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
    [ 397.614] (II) AIGLX: Suspending AIGLX clients for VT switch
    and
    /var/log/gdm/:0.log
    X.Org X Server 1.14.1
    Release Date: 2013-04-17
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.8.7-1-ARCH x86_64
    Current Operating System: Linux rolfgang 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64
    Kernel command line: cryptdevice=/dev/sda2:main root=/dev/mapper/main-root lang=de locale=de_DE.UTF-8 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
    Build Date: 17 April 2013 02:37:06PM
    Current version of pixman: 0.30.0
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 9 00:18:24 2013
    (==) Using config directory: "/etc/X11/xorg.conf.d"
    (==) No Layout section. Using the first Screen section.
    (==) No screen section available. Using defaults.
    (**) |-->Screen "Default Screen Section" (0)
    (**) | |-->Monitor "<default monitor>"
    (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    (**) | |-->Device "Intel Graphics"
    (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) Automatically adding GPU devices
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    (II) config/udev: Adding drm device (/dev/dri/card0)
    (--) PCI:*(0:0:2:0) 8086:0166:144d:c0d3 rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00003000/64
    Initializing built-in extension Generic Event Extension
    Initializing built-in extension SHAPE
    Initializing built-in extension MIT-SHM
    Initializing built-in extension XInputExtension
    Initializing built-in extension XTEST
    Initializing built-in extension BIG-REQUESTS
    Initializing built-in extension SYNC
    Initializing built-in extension XKEYBOARD
    Initializing built-in extension XC-MISC
    Initializing built-in extension SECURITY
    Initializing built-in extension XINERAMA
    Initializing built-in extension XFIXES
    Initializing built-in extension RENDER
    Initializing built-in extension RANDR
    Initializing built-in extension COMPOSITE
    Initializing built-in extension DAMAGE
    Initializing built-in extension MIT-SCREEN-SAVER
    Initializing built-in extension DOUBLE-BUFFER
    Initializing built-in extension RECORD
    Initializing built-in extension DPMS
    Initializing built-in extension X-Resource
    Initializing built-in extension XVideo
    Initializing built-in extension XVideo-MotionCompensation
    Initializing built-in extension XFree86-VidModeExtension
    Initializing built-in extension XFree86-DGA
    Initializing built-in extension XFree86-DRI
    Initializing built-in extension DRI2
    (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.14.1, module version = 1.0.0
    (==) AIGLX enabled
    Loading extension GLX
    (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.14.1, module version = 2.21.9
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
    Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
    Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
    Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
    Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
    HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
    Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
    Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
    Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
    Haswell SDV Server (GT2), Haswell SDV Server (GT3),
    Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
    Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
    Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
    Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
    HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
    Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
    Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
    Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
    Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
    HD Graphics 4600, Iris(TM) Pro Graphics 5200,
    Haswell CRW Server (GT1), Haswell CRW Server (GT2),
    Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
    Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
    Iris(TM) Pro Graphics 5200, ValleyView PO board
    (++) using VT number 1
    (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    (==) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
    (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
    (**) intel(0): Framebuffer tiled
    (**) intel(0): Pixmaps tiled
    (**) intel(0): "Tear free" disabled
    (**) intel(0): Forcing per-crtc-pixmaps? no
    (II) intel(0): Output eDP1 has no monitor section
    (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
    (II) intel(0): Output VGA1 has no monitor section
    (II) intel(0): Output HDMI1 has no monitor section
    (II) intel(0): Output DP1 has no monitor section
    (II) intel(0): EDID for output eDP1
    (II) intel(0): Manufacturer: SEC Model: 3546 Serial#: 0
    (II) intel(0): Year: 2011 Week: 0
    (II) intel(0): EDID Version: 1.4
    (II) intel(0): Digital Display Input
    (II) intel(0): 8 bits per channel
    (II) intel(0): Digital interface is DisplayPort
    (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16
    (II) intel(0): Gamma: 2.20
    (II) intel(0): No DPMS capabilities specified
    (II) intel(0): Supported color encodings: RGB 4:4:4
    (II) intel(0): First detailed timing is preferred mode
    (II) intel(0): Preferred mode is native pixel format and refresh rate
    (II) intel(0): redX: 0.590 redY: 0.340 greenX: 0.330 greenY: 0.540
    (II) intel(0): blueX: 0.155 blueY: 0.135 whiteX: 0.313 whiteY: 0.329
    (II) intel(0): Manufacturer's mask: 0
    (II) intel(0): Supported detailed timing:
    (II) intel(0): clock: 100.4 MHz Image Size: 293 x 165 mm
    (II) intel(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1792 h_border: 0
    (II) intel(0): v_active: 900 v_sync: 902 v_sync_end 907 v_blanking: 932 v_border: 0
    (II) intel(0): Unknown vendor-specific block f
    (II) intel(0): SAMSUNG
    (II) intel(0): LSN133KL018
    (II) intel(0): EDID (in hex):
    (II) intel(0): 00ffffffffffff004ca3463500000000
    (II) intel(0): 00150104a51d10780209e59757548a27
    (II) intel(0): 22505400000001010101010101010101
    (II) intel(0): 010101010101382740c0608420303020
    (II) intel(0): 250025a5100000190000000f00000000
    (II) intel(0): 000000000028800a1e00000000fe0053
    (II) intel(0): 414d53554e470a2020202020000000fe
    (II) intel(0): 004c534e3133334b4c3031380a200003
    (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    (II) intel(0): Printing probed modes for output eDP1
    (II) intel(0): Modeline "1600x900"x60.1 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
    (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
    (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
    (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
    (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
    (II) intel(0): EDID for output VGA1
    (II) intel(0): EDID for output HDMI1
    (II) intel(0): EDID for output DP1
    (II) intel(0): Output eDP1 connected
    (II) intel(0): Output VGA1 disconnected
    (II) intel(0): Output HDMI1 disconnected
    (II) intel(0): Output DP1 disconnected
    (II) intel(0): Using exact sizes for initial modes
    (II) intel(0): Output eDP1 using initial mode 1600x900
    (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    (==) intel(0): DPI set to (96, 96)
    (==) Depth 24 pixmap format is 32 bpp
    (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): HW Cursor enabled
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (==) intel(0): DPMS enabled
    (II) intel(0): [DRI2] Setup complete
    (II) intel(0): [DRI2] DRI driver: i965
    (II) intel(0): direct rendering: DRI2 Enabled
    (==) intel(0): hotplug detection: "enabled"
    (--) RandR disabled
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_INTEL_swap_event
    (II) AIGLX: enabled GLX_ARB_create_context
    (II) AIGLX: enabled GLX_ARB_create_context_profile
    (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    (II) AIGLX: Loaded and initialized i965
    (II) GLX: Initialized DRI2 GL provider for screen 0
    (II) intel(0): switch to mode 1600x900 on pipe 0 using eDP1
    (II) intel(0): Setting screen physical size to 423 x 238
    (II) config/udev: Adding input device Power Button (/dev/input/event4)
    (**) Power Button: Applying InputClass "system-keyboard"
    (**) Power Button: Applying InputClass "evdev keyboard catchall"
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.14.0, module version = 2.8.0
    (II) Using input driver 'evdev' for 'Power Button'
    (**) Power Button: always reports core events
    (**) evdev: Power Button: Device: "/dev/input/event4"
    (--) evdev: Power Button: Vendor 0 Product 0x1
    (--) evdev: Power Button: Found keys
    (II) evdev: Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
    > Ignoring extra symbols
    Errors from xkbcomp are not fatal to the X server
    (II) config/udev: Adding input device Video Bus (/dev/input/event10)
    (**) Video Bus: Applying InputClass "system-keyboard"
    (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'Video Bus'
    (**) Video Bus: always reports core events
    (**) evdev: Video Bus: Device: "/dev/input/event10"
    (--) evdev: Video Bus: Vendor 0 Product 0x6
    (--) evdev: Video Bus: Found keys
    (II) evdev: Video Bus: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    (II) config/udev: Adding input device Power Button (/dev/input/event3)
    (**) Power Button: Applying InputClass "system-keyboard"
    (**) Power Button: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'Power Button'
    (**) Power Button: always reports core events
    (**) evdev: Power Button: Device: "/dev/input/event3"
    (--) evdev: Power Button: Vendor 0 Product 0x1
    (--) evdev: Power Button: Found keys
    (II) evdev: Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
    (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
    (II) No input driver specified, ignoring this device.
    (II) This device may have been added with another device file.
    (II) config/udev: Adding drm device (/dev/dri/card0)
    (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event5)
    (II) No input driver specified, ignoring this device.
    (II) This device may have been added with another device file.
    (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event6)
    (II) No input driver specified, ignoring this device.
    (II) This device may have been added with another device file.
    (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event7)
    (II) No input driver specified, ignoring this device.
    (II) This device may have been added with another device file.
    (II) config/udev: Adding input device Webcam SC-13HDL11624N (/dev/input/event8)
    (**) Webcam SC-13HDL11624N: Applying InputClass "system-keyboard"
    (**) Webcam SC-13HDL11624N: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'Webcam SC-13HDL11624N'
    (**) Webcam SC-13HDL11624N: always reports core events
    (**) evdev: Webcam SC-13HDL11624N: Device: "/dev/input/event8"
    (--) evdev: Webcam SC-13HDL11624N: Vendor 0x2232 Product 0x1024
    (--) evdev: Webcam SC-13HDL11624N: Found keys
    (II) evdev: Webcam SC-13HDL11624N: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Webcam SC-13HDL11624N" (type: KEYBOARD, id 9)
    (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
    (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    (--) evdev: AT Translated Set 2 keyboard: Found keys
    (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
    (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event9)
    (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
    (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
    (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
    (**) ETPS/2 Elantech Touchpad: Applying InputClass "disable clickpad buttons"
    (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.14.1, module version = 1.7.1
    (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
    (**) ETPS/2 Elantech Touchpad: always reports core events
    (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
    (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2964 (res 33)
    (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1872 (res 32)
    (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
    (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
    (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
    (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
    (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
    (**) ETPS/2 Elantech Touchpad: always reports core events
    (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 11)
    (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
    (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
    (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.057
    (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
    (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
    (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
    (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
    (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
    (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
    (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
    (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
    (II) No input driver specified, ignoring this device.
    (II) This device may have been added with another device file.
    (II) intel(0): EDID vendor "SEC", prod id 13638
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
    (II) intel(0): EDID vendor "SEC", prod id 13638
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
    > Ignoring extra symbols
    Errors from xkbcomp are not fatal to the X server
    (II) intel(0): EDID vendor "SEC", prod id 13638
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
    > Ignoring extra symbols
    Errors from xkbcomp are not fatal to the X server
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
    > Ignoring extra symbols
    Errors from xkbcomp are not fatal to the X server
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
    > Ignoring extra symbols
    Errors from xkbcomp are not fatal to the X server
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
    > Ignoring extra symbols
    Errors from xkbcomp are not fatal to the X server
    (II) AIGLX: Suspending AIGLX clients for VT switch
    (II) AIGLX: Resuming AIGLX clients after VT switch
    (II) intel(0): switch to mode 1600x900 on pipe 0 using eDP1
    (II) intel(0): EDID vendor "SEC", prod id 13638
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
    (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
    > Ignoring extra symbols
    Errors from xkbcomp are not fatal to the X server
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
    > Ignoring extra symbols
    Errors from xkbcomp are not fatal to the X server
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
    > Ignoring extra symbols
    Errors from xkbcomp are not fatal to the X server
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
    > Ignoring extra symbols
    Errors from xkbcomp are not fatal to the X server
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
    > Ignoring extra symbols
    Errors from xkbcomp are not fatal to the X server
    (II) AIGLX: Suspending AIGLX clients for VT switch
    Last edited by Duxon (2013-06-15 16:17:35)

    Finally managed fixed it.
    libcanberra-pulse from [extra] was broken. I reinstalled it with --force.
    Likely that came with the recent pulseaudio upgrade.

  • Xfce4 and gnome-network-manager [solved]

    I just made a clean install of archlinux. installed xorg and Xfce4, xfce-goodies, gnome-panel, gnome-desktop and gnome-network-manager. also I enabled GNOME services in startup and sessions. how do I start that network manager now? is nowhere in the settings, nor there is icon to add to the taskbar (i got xfapplets installed too)
    Last edited by anarxi (2009-01-14 00:22:42)

    quoted from a previous thread
    I solved it by uncommenting my <locale><charset> in /etc/locale.gen.
    First you have to enable the locales you want being supported by your system. To enable or disable them, the file /etc/locale.gen is used. It contains every locale you can enable, and you have just to uncomment lines you want to do so.
    As we want to setup an english UTF-8 conform system, we want to enable en_US.UTF-8. But for compatibility to programs that don't support UTF-8 yet, it's recommended to support any other locale, prefixed with en_US as well. Having this in mind, we enable this set of locales:
    en_US.UTF8 UTF-8
    en_US ISO-8859-1
    After you've enabled the necessary locales, you have to run locale-gen as root to update them:
    # sudo locale-gen
    Generating locales...
    en_US.UTF-8... done
    en_US.ISO-8859-1... done
    Generation complete.

  • Gnome automount and media.repo under Oracle Linux 6.3

    Hello,
    I experiencing a strange behavior testing the following under Oracle Linux 6.3 (x86-64-bit) UEK2 with all latest updates. I selected the Gnome desktop packages using the "customize now" ratio button when installing the OS
    * Log in to a graphical shell such as GNOME
    * Insert addition media disk into the computer
    * Observe the media is mounted by the session
    * Wait a couple of seconds
    * Observe the /etc/yum.repos.d/packagekit-media.repo now exists
    The above is explained in more details at http://people.redhat.com/rhughes/media-repo.txt
    I don't know what the "addition media disk" is, but inserted the Oracle Linux 6.3 x86_64 binary distribution DVD, which also has media.repo file in the root directory. And btw, I'm using VirtualBox and the DVD is an .iso disk image.
    I'm experiencing the following:
    Gnome automount works and automatically opens the DVD when inserted.
    It does not create the /etc/yum.repos.d/packagekit-media.repo file.
    It actually does create the named repo file, but only after one waits about 15 minutes. Perhaps this has anything to do with gpk-update-icon, but when run manually it hangs.
    With the packagekit-media.repo file finally created. The gpk-application however complains: "The group list was invalid".
    I know how to create a yum configuration file pointing to a local repository, which is also coverd in the Oracle Linux 6.3 distribution readme. I just wonder about the problem. Th automatic business with the media.repo file seems broken and useless. I did one more test using the original RHEL kernel which, as expected, did not make a difference.
    Does anyone know more about it?
    Thanks!

    I cannot create an SR, but I did some more tests creating my own DVD, playing with the info in the media.repo file. It seems matching the mediaid and .discinfo information alone doesn't fix it.
    Actually some of the stuff is explained in the link I already used: http://people.redhat.com/rhughes/media-repo.txt. The problem seems that it doesn't work as advertised.
    It takes exactly 15 min. before the system (gnome) automatically copies the media.repo file from DVD to /etc/packagekit-media.repo. If the file already exists it gets overwritten.
    I think it might be a good idea to make an entry in the media.repo file on the DVD, such as:
    baseurl=file:///media/<disklabel>
    skip_if_unavailable=True
    Then when inserting the DVD under gnome it would not be necessary to create a yum repository configuration file to use the DVD. The 15 min. delay will have to be fixed, which is only supposed to take a couple of seconds.
    Edited by: Dude on Aug 27, 2012 5:51 PM

  • Problems starting X and gnome (Solved)

    I have just installed Arch, and installed and configured xorg as is says in the wiki, X worked with twm, so I installed gnome and gnome-extra also with the Gnome wiki, then , when using the gnome-session command to open gnome it gives me the following error message:
    "Gtk-WARNING **: Cannot open display:"
    So I configured the ~/.xinitrc file and added the exec gnome-session line to make gnome the default, restarted and when using the startx command it gives me this message:
    "(EE) xf86OpenSerial: Cannot open device /dev/mouse No such file or directory
    (EE)Mouse1: Cannot open input device
    (EE)PreInit failed for input device  "Mouse1"
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    >Warning:   Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
    >       Ignoring extra symbols
    Errors from xkbcomp are not fatal to the X erver
    No core pointer
    Fatal Server Error:
    failed to initialize core devices
    XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
    after 0 requests (0 known processed) with 0 events remaining."
    And nothing happens, im still in the command line, can anyone help me out?

    If you've recently updated udev, then yes, I'm pretty sure you need to update the kernel alongside it - there are patches in the newer kernels that work with udev.

  • Udev rules and group / permission errors [solved] [outdated]

    Latest udev is a miracle to me. It ignores every group ore permission settings. Anyone else having same experiences?
    Last edited by Moo-Crumpus (2008-09-29 05:17:40)

    Let's assume that you have two files with udev rules. The basic udev.rules and 00.udev.rules (with custom rules).
    Udev first reads all rules from 00 file and then rules from the basic file.
    This means that if you have a custom rule for a given device you should copy all rules that apply to it from the basic file to the 00 file (not only lines with GROUP). This is because with OPTIONS="last_rule" udev will stop processing rules for this device.
    All rules are read and then applied in the order from the top to bottom except SUBSYTEM which is applied as the last rule (kind of held in a buffer). This is the reason why my cd burner /dev/hdc had permissions for disk group and not optical.
    This is my 00.udev.rules (it still needs some cosmetic changes but it works and of course I don't have all the devices):
    SUBSYSTEM="video4linux", GROUP="users"
    SUBSYSTEM="sound", GROUP="users"
    SUBSYSTEM="printer", GROUP="users"
    SUBSYSTEM="block", GROUP="disk"
    BUS="ide", KERNEL="hd[a-z]", PROGRAM="/etc/udev/cdsymlinks.sh %k", SYMLINK="%c{1} %c{2} %c{3} %c{4} %c{5} %c{6}"
    BUS="ide", KERNEL="hd*", PROGRAM="/etc/udev/ide-devfs.sh %k %b %n", SYMLINK="%c{1} %c{2}"
    BUS="ide", KERNEL="hdc", SYSFS{removable}="1", PROGRAM="/bin/cat /proc/ide/%k/media", RESULT="cdrom*", NAME="%k", GROUP="users", SYMLINK="nagrywarka dvd cdrw", OPTIONS="last_rule"
    BUS="ide", KERNEL="hd[a-z]", SYSFS{removable}="1", PROGRAM="/bin/cat /proc/ide/%k/media", RESULT="cdrom*", NAME="%k", GROUP="users", OPTIONS="last_rule"
    BUS="ide", KERNEL="hd*", PROGRAM="/etc/udev/ide-floppy.sh %k", RESULT="floppy", NAME{all_partitions}="%k", GROUP="users", OPTIONS="last_rule"
    BUS="scsi", KERNEL="sr[0-9]*", PROGRAM="/etc/udev/cdsymlinks.sh %k", SYMLINK="%c{1} %c{2} %c{3} %c{4} %c{5} %c{6}"
    BUS="scsi", KERNEL="scd[0-9]*", PROGRAM="/etc/udev/cdsymlinks.sh %k", SYMLINK="%c{1} %c{2} %c{3} %c{4} %c{5} %c{6}"
    BUS="scsi", KERNEL="sr[0-9]*", SYSFS{type}="5", NAME="scd%n", GROUP="users", OPTIONS="last_rule"
    BUS="scsi", KERNEL="sg[0-9]*", SYSFS{type}="5", NAME="%k", GROUP="users", OPTIONS="last_rule"
    KERNEL="fd[0-9]*", NAME="fd%n", GROUP="users", SYMLINK="floppy/%n fd%nu1440 fd%nu720 fd%nh1200 fd%nu360", OPTIONS="last_rule"
    BUS="usb", SYSFS{serial}="CN16J1Q3HWSX", KERNEL="lp[0-9]*", NAME="usb/%k", GROUP="users", SYMLINK="drukarka_hp_845c drukarka", OPTIONS="last_rule"
    BUS="usb", KERNEL="sd*", PROGRAM="/etc/udev/usb-storage.sh %k", RESULT="1", NAME="%k", GROUP="users", OPTIONS="last_rule"
    KERNEL="rtc", NAME="misc/%k", SYMLINK="%k", GROUP="users", MODE="0664", OPTIONS="last_rule"
    KERNEL="agpgart", NAME="misc/%k", SYMLINK="%k" GROUP="users", OPTIONS="last_rule"
    KERNEL="nvidia*", GROUP="users", OPTIONS="last_rule"
    KERNEL="fb[0-9]*", NAME="fb/%n", GROUP="users", SYMLINK="%k", OPTIONS="last_rule"
    KERNEL="card[0-9]*", NAME="dri/%k", GROUP="users", OPTIONS="last_rule"
    KERNEL="3dfx*", NAME="%k", GROUP="users", OPTIONS="last_rule"
    KERNEL="dvb*", PROGRAM="/etc/udev/dvb.sh %k", NAME="%c", GROUP="users", OPTIONS="last_rule"
    KERNEL="video[0-9]*", NAME="v4l/video%n", GROUP="users", SYMLINK="%k", OPTIONS="last_rule"
    KERNEL="radio[0-9]*", NAME="v4l/radio%n", GROUP="users", SYMLINK="radio%e", OPTIONS="last_rule"
    KERNEL="vbi[0-9]*", NAME="v4l/vbi%n", GROUP="users", SYMLINK="%k", OPTIONS="last_rule"
    KERNEL="vtx[0-9]*", NAME="v4l/vtx%n", GROUP="users", SYMLINK="%k", OPTIONS="last_rule"
    KERNEL="controlC[0-9]*", NAME="snd/%k", OPTIONS="last_rule"
    KERNEL="hw[CD0-9]*", NAME="snd/%k", OPTIONS="last_rule"
    KERNEL="pcm[CD0-9cp]*", NAME="snd/%k", OPTIONS="last_rule"
    KERNEL="midi[CD0-9]*", NAME="snd/%k", OPTIONS="last_rule"
    KERNEL="timer", NAME="snd/%k", OPTIONS="last_rule"
    KERNEL="seq", NAME="snd/%k", OPTIONS="last_rule"
    KERNEL="audio*", NAME="sound/%k", SYMLINK="%k", OPTIONS="last_rule"
    KERNEL="dmmidi*", NAME="sound/%k", SYMLINK="%k", OPTIONS="last_rule"
    KERNEL="admmidi*", NAME="sound/%k", SYMLINK="%k", OPTIONS="last_rule"
    KERNEL="dsp*", NAME="sound/%k", SYMLINK="%k", OPTIONS="last_rule"
    KERNEL="adsp*", NAME="sound/%k", SYMLINK="%k", OPTIONS="last_rule"
    KERNEL="midi*", NAME="sound/%k", SYMLINK="%k", OPTIONS="last_rule"
    KERNEL="amidi*", NAME="sound/%k", SYMLINK="%k", OPTIONS="last_rule"
    KERNEL="mixer*", NAME="sound/%k", SYMLINK="%k", OPTIONS="last_rule"
    KERNEL="sequencer*", NAME="sound/%k", SYMLINK="%k", OPTIONS="last_rule"
    KERNEL="pktcdvd", NAME="pktcdvd/control", GROUP="users", MODE="0660", OPTIONS="last_rule"
    KERNEL="pktcdvd[0-9]*", NAME="pktcdvd/pktcdvd%n", GROUP="users", MODE="0660", OPTIONS="last_rule"
    The problem with /dev/hdc was that first udev (version 057) was reading a rule from my 00 file (BUS="ide", KERNEL="hdc"...) with GROUP=users. Then it was reading SUBSYSTEM="block", GROUP="disk" rule from the basic file (but it wasn't executed at that time). And then it was reading BUS="ide", KERNEL="hd[a-z]", SYSFS{removable}="1"... with GROUP=optical. Then it was executing SUBSYTEM rule (hdc is a block device). That's why only disk group had an access to /dev/hdc (with OPTIONS="last_rule" in the basic file in the GROUP="optical" line it would ignore SUBSYSTEM rule).
    There are also other rules that you should add (IMO) to your custom rules if  you are changing something. In my case it's for example BUS="ide", KERNEL="hd[a-z]", PROGRAM="/etc/udev/cdsymlinks.sh %k"... which creates symlinks for cd drives. This rule must be above other rules (the number of the symlinks is now unlimited - previously it was 5 IIRC).
    So now the rules are mixed together in the lexical order (except SUBSYTEM rules which are executed at the end) unless OPTIONS="last_rule" is used or second (and other) rule has a NAME filed (only one rule for a given device can have NAME filed. Every other rule for the same device with NAME field is ignored IIRC). It also means you can now split rules for a device into several rules - only one of them can have NAME filed and the last should have OPTIONS="last_rule".
    Since in your case you have custom rules only for a well defined usb devices (not /dev/sd*) IMO it should work as you think (only add OPTIONS="last_rule").
    I hope it's now perfectly clear  8) 

  • No TV sound - Problem with Pulseaudio and Gnome

    Hi Community!
    Since January 2013 I got big problems with the sound of my tvcard. The card is a Sundtek Media TV Pro. But after all the problems have nothing to to with the card itself!
    So far I found out, that the problem is with Pulseaudio.
    - Sound works under Windows on same PC.
    - Sound don't work under Arch - not with tvtime, not with vlc, etc.
    - Problem occurs even on a new installed system with the Arch-2013-02-01 install medium.
    cat /etc/mediasrv.log
    [1033] Pulseaudio connect reported an error (6 - Connection refused)
    [1033] select error() in audio processor (can be caused because of pulseaudio) (Interrupted system call)
    After setting up a new Arch installation with just xorg-server, gnome, tvtime and the sundtek driver from AUR I run journalctl -b:
    Feb 10 16:25:15 hightower pulseaudio[636]: [pulseaudio] pid.c:
    Daemon already running.
    With sudo journalctl | grep 'Feb 10 16:2' I get the following output:
    Feb 10 16:25:01 hightower rtkit-daemon[489]: Successfully made thread 488 of process 488 (/usr/bin/pulseaudio) owned by '120' high priority at nice level -11.
    Feb 10 16:25:14 hightower rtkit-daemon[489]: Successfully made thread 606 of process 606 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
    Feb 10 16:25:15 hightower rtkit-daemon[489]: Successfully made thread 636 of process 636 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
    Feb 10 16:25:15 hightower pulseaudio[636]: [pulseaudio] pid.c: Daemon already running.
    Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] module-jackdbus-detect.c: Unable to contact D-Bus session bus: org.freedesktop.DBus.Error.NotSupported: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
    Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] module.c: Failed to load module "module-jackdbus-detect" (argument:""): initialization failed.
    Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] socket-server.c: bind(): Die Adresse wird bereits verwendet
    Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] module.c: Failed to load module "module-esound-protocol-unix" (argument: ""): initialization failed.
    Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] main.c: Module load failed.
    Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] main.c: Module load failed.
    Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] main.c: Konnte Daemon nicht initialisieren.
    Feb 10 16:28:55 hightower pulseaudio[997]: [pulseaudio] main.c: Start des Daemons fehlgeschlagen.
    So, if I understand right, pulseaudio is alreade started by the rtkit-daemon and gnome couldn't start it again.
    At https://bugs.archlinux.org/task/30926 I found a hint concerning /etc/xdg/autostart/pulseaudio.desktop and /etc/xdg/autostart/pulseaudio-kde.desktop.
    After removing them from /etc/xdg/autostart and running journalctl -b there are no more errors.
    With sudo journalctl | grep 'pulseaudio' I get:
    sudo journalctl | grep 'Feb 10 17:4' | grep 'pulse*'
    Feb 10 17:41:42 hightower rtkit-daemon[485]: Successfully made thread 484 of process 484 (/usr/bin/pulseaudio) owned by '120' high priority at nice level -11.
    Feb 10 17:41:55 hightower rtkit-daemon[485]: Successfully made thread 625 of process 625 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
    In my opinion all looks ok! I also checked the channels with the alsamixer and it looks good, too.
    So I ran vlc v4l2://:dev=/dev/video0:width=720:height=576:tuner-frequency=510750:adev=/dev/null:standard=255 - but still no sound.
    With cat /var/log/mediasrv.log I checked the drivers logfile:
    2013-02-10 17:48:55 [343] SETTING DVB-C
    2013-02-10 17:48:55 [343] switching to analog TV
    2013-02-10 17:48:56 [343] SETTING PAL/SECAM
    2013-02-10 17:48:58 [343] invalid audio input selected: 2
    2013-02-10 17:48:58 [343] Setting frequency: 510750000
    2013-02-10 17:48:58 [343] Using settings for Europe
    2013-02-10 17:48:58 [343] Set Pixelformat: 0 YUV 4:2:2 (YUYV)
    2013-02-10 17:48:58 [1033] Starting audio processor (PID 1033)
    2013-02-10 17:48:58 [1033] initializing audio in audio processor
    2013-02-10 17:48:58 [1033] loaded local pulseaudio driver
    2013-02-10 17:48:58 [1033] select error() in audio processor (can be caused because of pulseaudio) (Interrupted system call)
    2013-02-10 17:48:59 [1033] Pulseaudio connect reported an error (6 - Connection refused)
    2013-02-10 17:48:59 [1033] select error() in audio processor (can be caused because of pulseaudio) (Interrupted system call)
    2013-02-10 17:48:59 [1033] Pulseaudio connect reported an error (6 - Connection refused)
    I started tvtime again. This time I ran rm -rf ~/.config/pulse/ and killall pulseaudio to kill the Pulseaudio server. I instantly got a loud noise out of my speakers.
    I closed tvtime and re-opened it. And there it was: TV SOUND OUT OF MY SPEAKERS!
    But now, when I run pavucontrol I get:
    Connection to PulseAudio failed. Automatic retry in 5s.
    In this cas this is likely because PULSE_SERVER in the Environment/X11 root Windows Properties or default-server in client.conf is misconfigured.
    This situation can also arrise when PulseAudio crashed and left stale details in the X11 Root Windows.
    If this is the case, then PuseAudio should autospawn again, or if this is not configured you sould run start-pulseaudio-x11 manually.
    I got the information from Sundtek, that Pulseaudio should not be started as system service. Instead, every user should have an own Pulseaudio daemon and that PA was concepted this way. But they don't know how it is implemented in ArchLinux.
    I also don't know it exactly. So the question to all you ArchLinu pro's:
    How is PA implemented in Arch? And how can I sustainable solve my problem?
    Thank you for your time and help!
    Durag

    There is just one more thing I found out.
    After logging into Gnome and running ps aux | grep pulse I get:
    rebel 727 0.7 0.2 444316 10288 ? S<l 03:02 0:00 /usr/bin/pulseaudio --start --log-target=syslog
    rebel 731 0.0 0.0 71236 2652 ? S 03:02 0:00 /usr/lib/pulse/gconf-helper
    rebel 843 0.0 0.0 17396 1184 pts/0 D+ 03:03 0:00 grep pulse
    To get the sound to work I run:
    rm -rf .config/pulse/
    killall pulseaudio
    killall -9 pulseaudio
    I again run ps aux | grep pulse
    rebel 4016 4.2 0.2 510124 11528 ? Sl 03:06 0:02 /usr/bin/pulseaudio --start --log-target=syslog
    rebel 4020 0.0 0.0 71368 2700 ? S 03:06 0:00 /usr/lib/pulse/gconf-helper
    rebel 4046 0.0 0.0 19456 1216 pts/0 R+ 03:07 0:00 grep pulse
    I can recognize that the STATs have changed. Maybe this can help to solve the problem?

  • [SOLVED] After latest update: Gnome icons broken

    Hi,
    I just did a full system update
    [2013-03-29 10:29] Running 'pacman -Syu'
    [2013-03-29 10:29] synchronizing package lists
    [2013-03-29 10:29] starting full system upgrade
    [2013-03-29 10:40] upgraded libdrm (2.4.42-1 -> 2.4.43-1)
    [2013-03-29 10:40] upgraded libffi (3.0.12-1 -> 3.0.13-1)
    [2013-03-29 10:40] upgraded wayland (1.0.5-1 -> 1.0.6-1)
    [2013-03-29 10:40] upgraded libgcrypt (1.5.0-3 -> 1.5.1-1)
    [2013-03-29 10:40] upgraded systemd (198-1 -> 198-2)
    [2013-03-29 10:40] upgraded mesa (9.1-3 -> 9.1.1-1)
    [2013-03-29 10:40] upgraded mesa-libgl (9.1-3 -> 9.1.1-1)
    [2013-03-29 10:40] upgraded ati-dri (9.1-3 -> 9.1.1-1)
    [2013-03-29 10:40] upgraded icu (50.1.2-1 -> 51.1-1)
    [2013-03-29 10:40] upgraded boost-libs (1.52.0-1 -> 1.52.0-3)
    [2013-03-29 10:40] upgraded gstreamer (1.0.5-1 -> 1.0.6-1)
    [2013-03-29 10:40] upgraded gst-plugins-base-libs (1.0.5-1 -> 1.0.6-1)
    [2013-03-29 10:40] g_module_open() failed for /usr/lib/gdk-pixbuf-2.0/2.10.0/loaders/libpixbufloader-svg.so: libicule.so.50: cannot open shared object file: No such file or directory
    [2013-03-29 10:40] upgraded gdk-pixbuf2 (2.26.5-1 -> 2.26.5-2)
    [2013-03-29 10:40] upgraded gst-plugins-good (1.0.5-1 -> 1.0.6-1)
    [2013-03-29 10:40] upgraded sqlite (3.7.15.2-1 -> 3.7.16-1)
    [2013-03-29 10:40] upgraded libtracker-sparql (0.14.4-3 -> 0.14.5-1)
    [2013-03-29 10:40] upgraded brasero (3.6.1-1 -> 3.6.1-2)
    [2013-03-29 10:40] installed libwebp (0.2.1-1)
    [2013-03-29 10:40] installed python (3.3.0-3)
    [2013-03-29 10:40] installed python-xdg (0.25-1)
    [2013-03-29 10:40] installed dotconf (1.3-3)
    [2013-03-29 10:40] installed speech-dispatcher (0.8-1)
    [2013-03-29 10:40] upgraded chromium (25.0.1364.172-1 -> 26.0.1410.43-2)
    [2013-03-29 10:40] upgraded polkit (0.109-1 -> 0.110-1)
    [2013-03-29 10:40] warning: /etc/colord.conf installed as /etc/colord.conf.pacnew
    [2013-03-29 10:40] upgraded colord (0.1.30-1 -> 0.1.31-1)
    [2013-03-29 10:40] upgraded colord-gtk (0.1.24-1 -> 0.1.25-1)
    [2013-03-29 10:40] upgraded dhclient (4.2.4.2-1 -> 4.2.5-1)
    [2013-03-29 10:40] upgraded diffutils (3.2-1 -> 3.3-1)
    [2013-03-29 10:40] upgraded dnssec-anchors (20120422-1 -> 20130320-1)
    [2013-03-29 10:40] upgraded file (5.13-1 -> 5.14-1)
    [2013-03-29 10:40] upgraded gegl (0.2.0-5 -> 0.2.0-6)
    [2013-03-29 10:40] upgraded geoclue (0.12.0-5 -> 0.12.99-1)
    [2013-03-29 10:40] upgraded gnome-common (3.6.0-1 -> 3.7.4-1)
    [2013-03-29 10:40] ==> To add the gnuplot mode in Emacs, add the content of /usr/share/emacs/site-lisp/dotemacs to your ~/.emacs file.
    [2013-03-29 10:40] Updating TeX tree...
    [2013-03-29 10:40] mktexlsr: Updating /etc/texmf/ls-R...
    [2013-03-29 10:40] mktexlsr: Updating /usr/share/texmf/ls-R...
    [2013-03-29 10:40] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
    [2013-03-29 10:40] mktexlsr: Updating /var/lib/texmf/ls-R...
    [2013-03-29 10:40] mktexlsr: Done.
    [2013-03-29 10:40] upgraded gnuplot (4.6.1-2 -> 4.6.2-2)
    [2013-03-29 10:40] upgraded gnutls (3.1.9-1 -> 3.1.10-1)
    [2013-03-29 10:40] Warning: Could not load "/usr/lib/graphviz/libgvplugin_rsvg.so.6" - file not found
    [2013-03-29 10:40] Warning: Could not load "/usr/lib/graphviz/libgvplugin_pango.so.6" - file not found
    [2013-03-29 10:40] Warning: Could not load "/usr/lib/graphviz/libgvplugin_gs.so.6" - file not found
    [2013-03-29 10:40] /tmp/alpm_SSGROj/.INSTALL: line 1: 2567 Segmentation fault (core dumped) usr/bin/dot -c
    [2013-03-29 10:40] upgraded graphviz (2.30.1-1 -> 2.30.1-2)
    [2013-03-29 10:40] upgraded gst-libav (1.0.5-1 -> 1.0.6-1)
    [2013-03-29 10:40] upgraded gst-plugins-bad (1.0.5-1 -> 1.0.6-1)
    [2013-03-29 10:40] upgraded gst-plugins-base (1.0.5-1 -> 1.0.6-1)
    [2013-03-29 10:40] upgraded gst-plugins-ugly (1.0.5-2 -> 1.0.6-1)
    [2013-03-29 10:40] upgraded harfbuzz (0.9.9-3 -> 0.9.14-1)
    [2013-03-29 10:40] upgraded hwloc (1.6.1-1 -> 1.6.2-1)
    [2013-03-29 10:40] upgraded imagemagick (6.8.2.3-1 -> 6.8.4.0-1)
    [2013-03-29 10:40] upgraded lib32-libdrm (2.4.42-1 -> 2.4.43-1)
    [2013-03-29 10:40] upgraded lib32-mesa (9.1-2 -> 9.1.1-1)
    [2013-03-29 10:40] upgraded lib32-mesa-libgl (9.1-2 -> 9.1.1-1)
    [2013-03-29 10:40] upgraded lib32-ati-dri (9.1-2 -> 9.1.1-1)
    [2013-03-29 10:40] upgraded lib32-libffi (3.0.11-1 -> 3.0.13-1)
    [2013-03-29 10:40] upgraded lib32-libgcrypt (1.5.0-1 -> 1.5.1-1)
    [2013-03-29 10:40] upgraded libxi (1.6.2-1 -> 1.7-1)
    [2013-03-29 10:40] upgraded lib32-libxi (1.6.2-1 -> 1.7-1)
    [2013-03-29 10:40] upgraded lib32-sqlite (3.7.15.2-1 -> 3.7.16-1)
    [2013-03-29 10:40] upgraded libcups (1.6.1-6 -> 1.6.2-1)
    [2013-03-29 10:40] upgraded libgexiv2 (0.5.0-2 -> 0.6.1-1)
    [2013-03-29 10:40] upgraded libsasl (2.1.23-9 -> 2.1.23-10)
    [2013-03-29 10:40] upgraded libwacom (0.6-1 -> 0.7-1)
    [2013-03-29 10:40] >>> Updating module dependencies. Please wait ...
    [2013-03-29 10:40] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2013-03-29 10:40] ==> Building image from preset: 'default'
    [2013-03-29 10:40] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2013-03-29 10:40] ==> Starting build: 3.8.4-1-ARCH
    [2013-03-29 10:40] -> Running build hook: [base]
    [2013-03-29 10:40] -> Running build hook: [udev]
    [2013-03-29 10:40] -> Running build hook: [autodetect]
    [2013-03-29 10:40] -> Running build hook: [modconf]
    [2013-03-29 10:40] -> Running build hook: [block]
    [2013-03-29 10:41] -> Running build hook: [filesystems]
    [2013-03-29 10:41] -> Running build hook: [keyboard]
    [2013-03-29 10:41] -> Running build hook: [fsck]
    [2013-03-29 10:41] ==> Generating module dependencies
    [2013-03-29 10:41] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2013-03-29 10:41] ==> Image generation successful
    [2013-03-29 10:41] ==> Building image from preset: 'fallback'
    [2013-03-29 10:41] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2013-03-29 10:41] ==> Starting build: 3.8.4-1-ARCH
    [2013-03-29 10:41] -> Running build hook: [base]
    [2013-03-29 10:41] -> Running build hook: [udev]
    [2013-03-29 10:41] -> Running build hook: [modconf]
    [2013-03-29 10:41] -> Running build hook: [block]
    [2013-03-29 10:41] -> Running build hook: [filesystems]
    [2013-03-29 10:41] -> Running build hook: [keyboard]
    [2013-03-29 10:41] -> Running build hook: [fsck]
    [2013-03-29 10:41] ==> Generating module dependencies
    [2013-03-29 10:41] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2013-03-29 10:41] ==> Image generation successful
    [2013-03-29 10:41] upgraded linux (3.7.10-1 -> 3.8.4-1)
    [2013-03-29 10:41] upgraded linux-headers (3.7.10-1 -> 3.8.4-1)
    [2013-03-29 10:41] upgraded ncurses (5.9-4 -> 5.9-5)
    [2013-03-29 10:41] upgraded obex-data-server (0.4.6-4 -> 0.4.6-5)
    [2013-03-29 10:41] upgraded openssh (6.1p1-6 -> 6.2p1-1)
    [2013-03-29 10:41] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
    [2013-03-29 10:41] upgraded pacman-mirrorlist (20130203-1 -> 20130323-1)
    [2013-03-29 10:41] upgraded poppler (0.22.1-3 -> 0.22.2-1)
    [2013-03-29 10:41] upgraded poppler-glib (0.22.1-3 -> 0.22.2-1)
    [2013-03-29 10:41] upgraded procps-ng (3.3.5-1 -> 3.3.7-1)
    [2013-03-29 10:41] upgraded qt4 (4.8.4-13 -> 4.8.4-16)
    [2013-03-29 10:41] upgraded raptor (2.0.9-1 -> 2.0.9-2)
    [2013-03-29 10:41] refind-efi applications have been installed at /usr/lib/refind/*.efi
    [2013-03-29 10:41]
    [2013-03-29 10:41] UEFI FS drivers have deen installed at /usr/lib/refind/drivers_*/
    [2013-03-29 10:41]
    [2013-03-29 10:41] Copy the efi application (according to your UEFI ARCH)
    [2013-03-29 10:41] and /usr/lib/refind/config/refind.conf to a sub-directory of <EFISYS>/EFI/
    [2013-03-29 10:41] and add an entry to firmware boot menu using efibootmgr or mactel-boot (for Macs)
    [2013-03-29 10:41]
    [2013-03-29 10:41] rEFInd icons have been installed at /usr/share/refind/icons/
    [2013-03-29 10:41]
    [2013-03-29 10:41] HTML Documentation is available at /usr/share/refind/docs/html/
    [2013-03-29 10:41]
    [2013-03-29 10:41] More info at [url]https://wiki.archlinux.org/index.php/UEFI_Bootloaders#Using_rEFInd[/url]
    [2013-03-29 10:41]
    [2013-03-29 10:41] upgraded refind-efi (0.6.7-1 -> 0.6.8-1)
    [2013-03-29 10:41] upgraded shadow (4.1.5.1-4 -> 4.1.5.1-5)
    [2013-03-29 10:41] upgraded webkitgtk3 (1.10.2-2 -> 1.10.2-3)
    [2013-03-29 10:41] upgraded shotwell (0.13.1-6 -> 0.14.0-1)
    [2013-03-29 10:41] upgraded skype (4.1.0.20-5 -> 4.1.0.20-6)
    [2013-03-29 10:41] upgraded systemd-sysvcompat (198-1 -> 198-2)
    [2013-03-29 10:41] >>> texlive: updating the filename database...
    [2013-03-29 10:41] mktexlsr: Updating /etc/texmf/ls-R...
    [2013-03-29 10:41] mktexlsr: Updating /usr/share/texmf/ls-R...
    [2013-03-29 10:41] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
    [2013-03-29 10:41] mktexlsr: Updating /var/lib/texmf/ls-R...
    [2013-03-29 10:41] mktexlsr: Done.
    [2013-03-29 10:41] recreating all formats... done.
    [2013-03-29 10:41] (logs are under /var/lib/texmf/web2c/<engine>/<formatname>.log)
    [2013-03-29 10:41] upgraded texlive-bin (2012.0-7 -> 2012.0-8)
    [2013-03-29 10:41] upgraded upower (0.9.19-1 -> 0.9.20-1)
    [2013-03-29 10:41] upgraded tracker (0.14.4-3 -> 0.14.5-1)
    [2013-03-29 10:41] upgraded webkitgtk2 (1.10.2-2 -> 1.10.2-3)
    [2013-03-29 10:41] upgraded xdg-user-dirs-gtk (0.9-1 -> 0.10-1)
    [2013-03-29 10:41] upgraded xf86-input-evdev (2.7.3-2 -> 2.8.0-1)
    [2013-03-29 10:41] upgraded xf86-input-synaptics (1.6.3-1 -> 1.6.3-2)
    [2013-03-29 10:41] installed glamor-egl (0.5.0-4)
    [2013-03-29 10:41] upgraded xf86-video-ati (1:7.1.0-1 -> 1:7.1.0-3)
    [2013-03-29 10:41] upgraded xf86-video-vesa (2.3.2-2 -> 2.3.2-3)
    [2013-03-29 10:41] upgraded xorg-server-common (1.13.3-1 -> 1.14.0-2)
    [2013-03-29 10:41] upgraded xorg-server (1.13.3-1 -> 1.14.0-2)
    Due to another bug here in rEFInd, I had to downgrade the kernel afterwards
    [2013-03-29 10:47] Running 'pacman -U linux-3.7.9-2-x86_64.pkg.tar.xz linux-headers-3.7.9-2-x86_64.pkg.tar.xz'
    [2013-03-29 10:48] >>> Updating module dependencies. Please wait ...
    [2013-03-29 10:48] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2013-03-29 10:48] ==> Building image from preset: 'default'
    [2013-03-29 10:48] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2013-03-29 10:48] ==> Starting build: 3.7.9-2-ARCH
    [2013-03-29 10:48] -> Running build hook: [base]
    [2013-03-29 10:48] -> Running build hook: [udev]
    [2013-03-29 10:48] -> Running build hook: [autodetect]
    [2013-03-29 10:48] -> Running build hook: [modconf]
    [2013-03-29 10:48] -> Running build hook: [block]
    [2013-03-29 10:48] -> Running build hook: [filesystems]
    [2013-03-29 10:48] -> Running build hook: [keyboard]
    [2013-03-29 10:48] -> Running build hook: [fsck]
    [2013-03-29 10:48] ==> Generating module dependencies
    [2013-03-29 10:48] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2013-03-29 10:48] ==> Image generation successful
    [2013-03-29 10:48] ==> Building image from preset: 'fallback'
    [2013-03-29 10:48] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2013-03-29 10:48] ==> Starting build: 3.7.9-2-ARCH
    [2013-03-29 10:48] -> Running build hook: [base]
    [2013-03-29 10:48] -> Running build hook: [udev]
    [2013-03-29 10:48] -> Running build hook: [modconf]
    [2013-03-29 10:48] -> Running build hook: [block]
    [2013-03-29 10:48] -> Running build hook: [filesystems]
    [2013-03-29 10:48] -> Running build hook: [keyboard]
    [2013-03-29 10:48] -> Running build hook: [fsck]
    [2013-03-29 10:48] ==> Generating module dependencies
    [2013-03-29 10:48] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2013-03-29 10:48] ==> Image generation successful
    [2013-03-29 10:48] upgraded linux (3.8.4-1 -> 3.7.9-2)
    [2013-03-29 10:48] upgraded linux-headers (3.8.4-1 -> 3.7.9-2)
    Now my icons in GDM and GNOME are missing. The icons in the top panel are not monochrome anymore and the Shell Overview and Web are missing all their icons. Plus they are crashing repeadedly.
    Is it possible that this has something to do with the old kernel? Or is this another problem? What does the line
    [2013-03-29 10:40] g_module_open() failed for /usr/lib/gdk-pixbuf-2.0/2.10.0/loaders/libpixbufloader-svg.so: libicule.so.50: cannot open shared object file: No such file or directory
    mean?
    Last edited by mjb (2013-03-30 16:13:45)

    mjb wrote:
    Is it possible that this has something to do with the old kernel? Or is this another problem? What does the line
    [2013-03-29 10:40] g_module_open() failed for /usr/lib/gdk-pixbuf-2.0/2.10.0/loaders/libpixbufloader-svg.so: libicule.so.50: cannot open shared object file: No such file or directory
    mean?
    Icu was upgraded from 0.50 to 0.51.1 , you probably have packages (could be from AUR) that are build against the old icu version and need to be rebuild.
    Check https://bbs.archlinux.org/viewtopic.php?id=160363

  • [SOLVED] New Install of Gnome 3.2 doesn't feel like loading

    Greetings,
    Before making this post, I have spent the majority of the day trying to solve this issue. I have switched from nvidia drivers to nouvela (sp?) drivers, incase that was the issue. I have scoured google, arch-wiki, and the forums until my eyes have bled. I have dug through the xsession-errors log to search out any missing components that might be causing this... but to no avail. If anything, trying to run and try Gnome 3.2 has made me feel like a complete idiot, who has obviously learnt nothing after years of using linux. So, I come here hoping that some one can point me to the solution my brain cannot itself come up with.
    Here the situation:
    I have been running KDE4 for quite some time happily. I have ran Gnome 3 back in its beginning days succesfully as well, but that was an older, now dead, pc. Having seen some neat little things about the new Gnome 3.2, I got an itch to give it a try. So, I go and follow the Gnome article on the excellent arch wiki- installing both gnome and gnome extras, letting it grab everything, change from kdm to gdm, and reboot.
    Well, it gives me the old gdm I remember from the early gnome 3 days (wasn't this changed) despite it showing that it is GDM 3.2 via pacman. It shows my user name, lets me put my password, and shows the stripped background. One thing to note is that the cursor remains a clock face, never changing to a pointer.
    I log in, choosing GNOME, all that remains is the wallpaper, with the clockface cursor, no pointer. I go take the kids to the bus stop, come back apx. 20 min. later, no change.
    Ok, bug crushing time right? So I go through the steps. I make sure that gnome shell is indeed installed. I remove any config files (there weren't any), remove gnome shell, reinstall. No go. I rinse and repeat, but removing & reinstalling different things, such as GDM, and even gnome completely. No go.
    Hopping into pekwm, I search. I make copies of the xsession-errors each time, and load them in pekwm after a reboot, looking through with pacman by myside to make sure I have any possible missing files. And finally after failure after failure I give up, and come here.
    So, here's my xsession-errors log. Please, if anyone can help, or even offer any kind of suggestion that might spark something in my brain to get me going in the right direction, I'd greatly appreciate it. If this thread needs moved, merged, etc, please do so... I've searched the forums, but now my brain is numb, so yeah...
    /etc/gdm/Xsession: Beginning session setup...
    /etc/gdm/Xsession: Setup done, will execute: /usr/bin/ssh-agent -- gnome-session
    gnome-session[1112]: EggSMClient-WARNING: Desktop file '/home/mythus/.config/autostart/dropbox.desktop' has malformed Icon key 'dropbox.png'(should not include extension)
    ** (gnome-settings-daemon:1138): WARNING **: libltdl.so.7: cannot open shared object file: No such file or directory
    ** (gnome-settings-daemon:1138): WARNING **: Cannot load plugin 'Color' since file '/usr/lib/gnome-settings-daemon-3.0/libcolor.so' cannot be read.
    ** (gnome-settings-daemon:1138): WARNING **: Error activating plugin 'Color'
    ** (gnome-settings-daemon:1138): WARNING **: libltdl.so.7: cannot open shared object file: No such file or directory
    ** (gnome-settings-daemon:1138): WARNING **: Cannot load plugin 'Power' since file '/usr/lib/gnome-settings-daemon-3.0/libpower.so' cannot be read.
    ** (gnome-settings-daemon:1138): WARNING **: Error activating plugin 'Power'
    GNOME_KEYRING_CONTROL=/tmp/keyring-HPDXfX
    GNOME_KEYRING_CONTROL=/tmp/keyring-HPDXfX
    GPG_AGENT_INFO=/tmp/keyring-HPDXfX/gpg:0:1
    GNOME_KEYRING_CONTROL=/tmp/keyring-HPDXfX
    GPG_AGENT_INFO=/tmp/keyring-HPDXfX/gpg:0:1
    GNOME_KEYRING_CONTROL=/tmp/keyring-HPDXfX
    GPG_AGENT_INFO=/tmp/keyring-HPDXfX/gpg:0:1
    SSH_AUTH_SOCK=/tmp/keyring-HPDXfX/ssh
    ** (gnome-settings-daemon:1138): WARNING **: libltdl.so.7: cannot open shared object file: No such file or directory
    ** (gnome-settings-daemon:1138): WARNING **: Cannot load plugin 'Media keys' since file '/usr/lib/gnome-settings-daemon-3.0/libmedia-keys.so' cannot be read.
    ** (gnome-settings-daemon:1138): WARNING **: Error activating plugin 'Media keys'
    Gtk-Message: Failed to load module "canberra-gtk-module"
    common-plugin-Message: checking whether we have a device for 4: yes
    common-plugin-Message: checking whether we have a device for 5: yes
    common-plugin-Message: checking whether we have a device for 6: yes
    common-plugin-Message: checking whether we have a device for 7: yes
    common-plugin-Message: checking whether we have a device for 8: yes
    common-plugin-Message: checking whether we have a device for 9: yes
    common-plugin-Message: checking whether we have a device for 10: yes
    /usr/bin/gnome-shell: error while loading shared libraries: libltdl.so.7: cannot open shared object file: No such file or directory
    gnome-session[1112]: WARNING: Failed to start app: Unable to start application: Failed to execute child process "if" (No such file or directory)
    Initializing tracker-store...
    Tracker-Message: Setting up monitor for changes to config file:'/home/mythus/.config/tracker/tracker-store.cfg'
    Initializing tracker-miner-fs...
    /usr/lib/evolution/3.2/evolution-alarm-notify: error while loading shared libraries: libltdl.so.7: cannot open shared object file: No such file or directory
    Tracker-Message: Setting up monitor for changes to config file:'/home/mythus/.config/tracker/tracker-miner-fs.cfg'
    /usr/bin/canberra-gtk-play: error while loading shared libraries: libltdl.so.7: cannot open shared object file: No such file or directory
    Gtk-Message: Failed to load module "canberra-gtk-module"
    Starting log:
    File:'/home/mythus/.local/share/tracker/tracker-miner-fs.log'
    Gtk-Message: Failed to load module "canberra-gtk-module"
    Gtk-Message: Failed to load module "canberra-gtk-module"
    /usr/bin/pulseaudio: error while loading shared libraries: libltdl.so.7: cannot open shared object file: No such file or directory
    Tracker-Message: Setting up monitor for changes to config file:'/home/mythus/.config/tracker/tracker-store.cfg'
    Starting log:
    File:'/home/mythus/.local/share/tracker/tracker-store.log'
    ** Message: applet now removed from the notification area
    (nm-applet:1180): libnotify-WARNING **: Failed to connect to proxy
    ** (nm-applet:1180): WARNING **: get_all_cb: couldn't retrieve system settings properties: (25) Launch helper exited with unknown return code 1.
    ** (nm-applet:1180): WARNING **: fetch_connections_done: error fetching connections: (25) Launch helper exited with unknown return code 1.
    ** (nm-applet:1180): WARNING **: Failed to register as an agent: (25) Launch helper exited with unknown return code 1
    Gtk-Message: Failed to load module "canberra-gtk-module"
    /usr/lib/libgvfscommon.so.0: undefined symbol: g_free
    Failed to load module: /usr/lib/gio/modules/libgvfsdbus.so
    Last edited by mythus (2011-10-07 15:36:43)

    Ok, I guess all it took was for me to post this to wake up and be able to solve the issue.
    It is simple really. I just needed to re-install libltdl.
    So, for those searching, if you get this similar problem,
    pacman -S libltdl
    is what solved it for me.

  • I3 and gnome-session

    trying to use i3 with gdm and gnome-session, following the same steps as using xmonad and awesome. gnome-session crashes about 30 seconds after it starts. i3 is running properly before that.
    /usr/share/xsessions/i3-gnome.desktop:
    [Desktop Entry]
    Name=i3 GNOME
    Comment=Dynamic window manager
    TryExec=/usr/bin/gnome-session
    Exec=gnome-session --session=i3
    Type=XSession
    /usr/share/gnome-session/sessions/i3.session
    [GNOME Session]
    Name=i3 session
    RequiredComponents=gnome-settings-daemon;
    RequiredProviders=windowmanager;notifications;
    DefaultProvider-windowmanager=i3
    DefaultProvider-notifications=notification-daemon
    ~/.xsession-errors (after the i3 init stuff):
    gnome-session[9169]: WARNING: Application 'i3.desktop' failed to register before timeout
    [src/xcb.c:698] ERROR: X11 connection was closed unexpectedly - maybe your X server terminated / crashed?
    (notification-daemon:9225): Gdk-WARNING **: notification-daemon: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0"
    after 16 requests (16 known processed) with 0 events remaining.
    XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0"
    after 32 requests (32 known processed) with 0 events remaining.
    i feel like gnome-session shouldn't crash if it's only throwing a warning. there's not much info here. as far as i know, i3 logs to ~/.xsession-errors anyway.

    I switched nvidia card for ati and its solved my problem so far.

  • [SOLVED] Conky troubles with Gnome

    I don't know if I am making some obvious, easily correctable mistake, or if this is a known bug. I have looked on the wiki and all I could find about Conky on Gnome was a short little thing that caused this problem:
    http://imgur.com/jQPBsDq
    Here is my .conkyrc file:
    # Conky, a system monitor, based on torsmo
    # Any original torsmo code is licensed under the BSD license
    # All code written since the fork of torsmo is licensed under the GPL
    # Please see COPYING for details
    # Copyright (c) 2004, Hannu Saransaari and Lauri Hakkarainen
    # Copyright (c) 2005-2010 Brenden Matthews, Philip Kovacs, et. al. (see AUTHORS)
    # All rights reserved.
    # This program is free software: you can redistribute it and/or modify
    # it under the terms of the GNU General Public License as published by
    # the Free Software Foundation, either version 3 of the License, or
    # (at your option) any later version.
    # This program is distributed in the hope that it will be useful,
    # but WITHOUT ANY WARRANTY; without even the implied warranty of
    # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
    # GNU General Public License for more details.
    # You should have received a copy of the GNU General Public License
    # along with this program. If not, see <http://www.gnu.org/licenses/>.
    own_window yes
    own_window_type conky
    own_window_transparent yes
    own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
    alignment lower_right
    background yes
    border_width 1
    cpu_avg_samples 2
    default_color white
    default_outline_color white
    default_shade_color white
    draw_borders no
    draw_graph_borders yes
    draw_outline no
    draw_shades no
    use_xft yes
    xftfont DejaVu Sans Mono:size=12
    gap_x 5
    gap_y 60
    minimum_size 5 5
    net_avg_samples 2
    no_buffers yes
    out_to_console no
    out_to_stderr no
    extra_newline no
    stippled_borders 0
    update_interval 1.0
    uppercase no
    use_spacer none
    show_graph_scale no
    show_graph_range no
    TEXT
    ${scroll 16 $nodename - $sysname $kernel on $machine | }
    $hr
    ${color grey}Uptime:$color $uptime
    ${color grey}Frequency (in MHz):$color $freq
    ${color grey}Frequency (in GHz):$color $freq_g
    ${color grey}RAM Usage:$color $mem/$memmax - $memperc% ${membar 4}
    ${color grey}Swap Usage:$color $swap/$swapmax - $swapperc% ${swapbar 4}
    ${color grey}CPU Usage:$color $cpu% ${cpubar 4}
    ${color grey}Processes:$color $processes ${color grey}Running:$color $running_processes
    $hr
    ${color grey}File systems:
    / $color${fs_used /}/${fs_size /} ${fs_bar 6 /}
    ${color grey}Networking:
    Up:$color ${upspeed eth0} ${color grey} - Down:$color ${downspeed eth0}
    $hr
    ${color grey}Name PID CPU% MEM%
    ${color lightgrey} ${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1}
    ${color lightgrey} ${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2}
    ${color lightgrey} ${top name 3} ${top pid 3} ${top cpu 3} ${top mem 3}
    ${color lightgrey} ${top name 4} ${top pid 4} ${top cpu 4} ${top mem 4}
    Has anyone else discovered a way to make conky work transparently with Gnome as a DE?
    Thanks for the help!
    Last edited by treeman1111 (2013-02-17 22:21:02)

    treeman1111 wrote:All you do is follow me around and tell me what I am doing wrong.
    Thats because you keep exhibiting the same behaviours, despite being asked not to.
    I'll link you (again) to the Forum Etiquette. Please read all of it.
    Don't expect that help vampirism will be tolerated here, it won't.
    I'll also remind you of the Arch Way
    This user-centric design necessarily implies a certain "do-it-yourself" approach to using the Arch distribution. Rather than pursuing assistance or requesting a new feature to be implemented by developers, Arch Linux users have a tendency to solve problems themselves and generously share the results with the community and development team – a "do first, then ask" philosophy.

Maybe you are looking for