[SOLVED] Unable to connect via an ftp cable with my acer Laptop

Hello there everyone!
I can't connect to the internet.Although i installed via ftp the packages and i could successfully ping google.After i installed gnome 3 i can't ping anything.
I need your help!I have Laptop connected to my router with an ftp cable,my desktop ubuntu pc works fine with the internet,but after reading again and again this two guides :
https://wiki.archlinux.org/index.php/Be … cessary.29
https://wiki.archlinux.org/index.php/Network
nothing seems to work!Could someone please help me?
Last edited by sepuku (2011-06-04 01:22:46)

You should check settings in NetworkManager as well, since your settings broke after installing Gnome 3 that seems like a possible culprit.
Generally off topic:
Just as a small note, there is such a thing as a FTP cable, though it is also sometimes written as F/UTP due to newer standards names. Basically it is a TP cable where the cables in it are wrapped in foil, hence the name Foiled Twisted Pair. This gives shielding from interference like magnetic fields unlike a UTP cable which is an Unshielded TP cable. There are also several other cable shielding standard names.
http://en.wikipedia.org/wiki/Twisted_pa … _shielding

Similar Messages

FTP-client behind RRAS - unable to connect to external FTP servers

FTP-client behind RRAS - unable to connect to external FTP servers
A small network (10-20PCs) without any segmentation - one LAN with one Gateway.
1. If the Gateway is some small hardware device, there are not any problems to make FTP-connections from LAN to Internet FTP-servers
2. If the Gateway is Win2003+RRAS+NAT or Win2003+ISA2005, there are not any problems to make FTP-connections from LAN to Internet FTP-servers
3. But if the gateway is Win2008+RAS+NAT or Win2012+RRAS+NAT, the computers in the LAN are not able to connect to Internet FTP-servers
I made a few tests:
1. On Win2012+RRAS+NAT
TurnOff Windows Firewall for All profiles (Domain, Private, Public) - the problem disappears, it it possible to connect to external Internet FTP-servers.
2. On Win2012+RRAS+NAT
TurnOff Windows Firewall only for Domain profile - the problem disappears, it it possible to connect to Internet FTP-servers.
3. On Win2012+RRAS+NAT
TurnOn Windows Firewall for All profiles (Domain, Private, Public)
But I excluded the Internal NIC in this list
Windows Firewall / Properties / Domain Profile / Protected network connections
and the problem disappears again
My question is:
What new Firewall rule I have to make and where to place it (to be able to make FTP-connection from LAN to Internet FTP-servers)?
I made some attempts to allow port21, but any success.

Thank you, but did you try this ?
Can you describe in detail "exclusion rule for FTP traffic" ?!
In my previous post, I want to say that if you use Win 2008/2012 RAS+NAT as a network gateway, than it is not possible to make FTP-connections to external FTP servers from the computers behind that gateway.
And the standard attempts to make "Allow"-rules for port 21 in the gateway firewall (Win 2008/2012), do not solve the problem.
No matter which FTP-client you can try to use.
To see this problem, just make few simple tests:
">telnet <ftp-server> 21"
with firewall on/off and inbound/outbound "Allow port 21 rule (All/Domain/Private/Public)"
In my country, the Government Tax Department uses FTP-protocol to collect monthly data from companies.
And it is too stupid scenario (to be a small company and to) upgrade from Win 2003 to a newer 2008/2012 and than to not be able to make all your jobs.
-------EDIT---------
The same problem (and its solution) is described here:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/0c68aed6-e22b-4cd4-86bd-f3c767e88349/advanced-firewall-blocking-through-ftp-traffic-rras
The magic command:
">netsh routing ip nat delete ftp"
solved the problem for me.
And here is the description of this command - "Disables the FTP proxy on the NAT server."
http://technet.microsoft.com/en-us/library/cc754535(v=ws.10).aspx#BKMK_106

When my iPhone is connected (via the Lightning cable) to the usb port in my car, the alert tones are no longer played through the car speaker or the phone. This previously worked, but has randomly stopped working, help!

When my iPhone is connected (via the Lightning cable) to the usb port in my car, the alert tones are no longer played through the car speaker or the phone. This previously worked, but has randomly stopped working. help!

I took my iPhone to the Service center of M/s RSG INFOTECH PRIVATE LIMITED on April 17, 2014.
Why are you posting in this forum about what occured with an independent service provider? How is is at all relevant to Apple?? In fact, service by any person or business not authorized by Apple voids any waranty.

My computer can not recognize the new Apple iPod touch when it is connected via the USB cable (that goes with it) attempt to attach it to the computer.

My computer can not recognize the new Apple iPod touch when it is connected via the USB cable (that goes with it) attempt to attach it to the computer.

You do have iTunes installed right?
See:
iOS: Device not recognized in iTunes for Windows

Unable to connect to my Oracle Database with Microsoft's ODBC for Oracle driver

I am unable to connect to my Oracle Database with Microsoft's ODBC for Oracle driver vers.2.573.4202.00 on a Win98 computer.
First, I create a "Net Service Name" in order for the ODBC Driver to find the Oracle server. I then created a System DSN in the ODBC Data Source Administrator and assigned the "Net Server Name" as the server in the "Microsoft ODBC for Oracle Setup". But when I test this DSN with Oracle's provided "Oracle ODBC 32Bit Test vers.2.5.3.1.0" I get an error:
SQLSTATE: NA000
Native Error Code:0
Driver Message:[Microsoft][ODBC driver for Oracle][Oracle]
This error occurred on all three Win98 computers I have tried. It does however, seem to work fine on WinNT 4.0, and believe it or not, on the two Win95 computers I have tried.
Does anyone have any fixes, recomendations, or advice?
Thank you,
Eric Edwards
null

Why are yu not using the Oracle ODBC driver - these can be downloaded from OTN.
Have you set up a tnsnames.ora entry for the Oracle database you want to connect to? Does this name have a domain name added to it? Check %ORACLE_HOME%\network\admin\tnsnames.ora for the service name. If it is a name of the form :
name.domain.subdomain
then you should try using this full name when configuring the ODBC data source.
null

AirDisk File Sharing - Saving Files - Unable to connect via wires then...

OK, I followed these instructions from another poster as I was unable to save Microsoft Word documents directly to the drive via the "Save As" option...
-------- PREVIOUS POSTERS INFO ----------
The solution that works for me is to mount the AirDisk(s) using SMB instead of AFP.
This means you should log on the AEBS and configure the Disk for Windows File Sharing - this is on the 'File Sharing' tab of the Disks configuration group.
You only need to put in a Workgroup Name (I used "Basestation"). Don't worry about the WINS Server.
You should update your AEBS, and turn of the AirDisk Utility.
You then mount your disk(s) using SMB. You can do this using the Finder -> Go -> Connect to Server.
Enter the following:
smb://"YourBaseStationName".local./"YourDiskName"
You should then be asked to enter the Workgroup name, the disk name and the disk password.
This should mount your AirDisk using SMB.
In my experience, this not only solved my problem re saving within Word/Excel, but also increased the speed with which I can access the AirDisk...
(If you want these Disks to mount automatically when you login, then Add these disks to you Start Up items in your login account...)
-------- END POSTER ------
OK, so here is my problem... After doing this, I was able to save a file directly to the drive... I also followed these instructions as it said it would be faster overall... Now, I use Apple Backup 3.1 to backup both my laptops to my external hard drive on the Extreme. Well, when I brought up the drives on my desktop, the names didn't change, but the names of the drives were all capital letters... I think this threw off the Backup program because it said that it doesn't recognize this location, therefore, it showed that he had never backed up to that location before. So, figuring I changed it and caused a few minor changes, that I would just erase the hard drive, plug the hard drive directly into the laptop as I had done before to speed up the inital backup, and then go back to wireless backups thereafter as they wouldn't be "full" backups and would then be faster and tolerable. Well, when I went to connect the drive to my laptop via the USB cable, you could hear the drive mounting, you could see the drives mounted in Disk Utility, but they refused to show up on the desktop, no matter what. What does this mean? Did making the drives work as File Sharing drives make them no longer able to mount via a cable anymore? What gives? Any ideas?

1. My USB 500GB External Hard Drive is currently
partitioned into three different drives. The Volume
Format is "Mac OS Extended (Journaled), what is
that?
Mac OS Extended (Journaled) is one of the HFS formats. Apple does not use the term HFS anymore but it is the same thing. You can find a good explanation about it here http://en.wikipedia.org/wiki/HFS_Plus
This will explain journalling, http://en.wikipedia.org/wiki/Journalingfilesystem
2. What is a FAT volume? What does FAT stand for?
Where would I select that?
Here is an explanation about FAT http://en.wikipedia.org/wiki/FileAllocationTable
It is a choice in Disk Utility when you erase a disk.
3. What is an HFS volume? What does HFS stand for?
Where would I select that?
See above: Mac OS Extended.
It is a choice in Disk Utility when you erase a disk.
4. What does SMB mean/stand for?
It stands for Server Message Block explained here http://en.wikipedia.org/wiki/ServerMessageBlock
It is a protocol for connecting to volumes over a network.
5. What does AFP mean/stand for?
It stands for Apple File Protocol explained here http://en.wikipedia.org/wiki/AppleFilingProtocol
It is also a protocol for connecting to volumes over a network.
- Yes, I tried to save an MS Word document to my
AirPort Disk, but it hung up and I got the spinning
beach ball and ended in an error and I had to force
Microsoft Word to quit. Then I saw that posting and
I tried that, I was then able to open an MS Word
document and save it directly to the drive the first
time. However, like I said, it messed up my Backup
3.1 (When mounting as SMB) and made it believe that
this was a whole new drive and that it hadn't backed
up to it before, when it had, but only when I
connected as AFP.
Did Backup work when you connected using AFP?
- So, this would've been a simple fix if I plan on
staying with SMB share, however, when I go to connect
my USB External Hard Drive directly to my laptop, the
partitions do not mount on my drive like they had
before I made the drives a File Sharing device
through AirPort Utility.
Try using Disk Utility to repair the disk or disk permissions and see if you can read it again.
6. How do I get that drive to be recognized by my
computer again when I connect it directly to my
laptop?
I don't know why this is happening you may want to call Apple Support about that.
7. I don't care about anything Windows/PC, so
whatever way is FASTER and provides the BEST results,
let me know!
If you don't have PCs then stick with Mac OS Extended (Journaled) as your volume file format.
8. Also, when I select "Connect to server" and then
click "Browse" and then "Network" nothing shows up in
there, but when I type the path in they connect just
fine, why?
That's strange! All available network volumes should show up when you click on the Network icon in the Finder. I don't know why it is not working for you.
THANKS FOR ALL THE HELP!
Some thoughts!
I would stick with Mac OS Extended (Journaled) as your volume file format. If backing up to the network share is important to you, I would wait until Apple fixes the problem regarding opening and saving Word files directly to the network share (Air Disk). Save them locally and then copy them to the network share.

Unable to connect via "Data Transfer" Mode On N95 ...

Its been happening for a little while now. When i plug the USB cable in, it asks if i wanna connect via PC Suite, Data Transfer etc
When i click Data Transfer it says the following:
"Unable to activate Data Transfer Mode. Mass Memory is in use by another application"
Does anyone know the fix for this problem?
Many thanks
Message Edited by tiff777 on 06-Nov-2008 07:56 PM
Message Edited by tiff777 on 06-Nov-2008 07:57 PM

Hi There
Im not sure this would work for you all but i came accross this discussion after suffering the same problem and after pulling my hair out i finally solved it and thought it was only fair i posted how.
I had tried all options on here apart from deleteing everything off my memory card ( i wasn't keen on this option ) i checked the running apps and it just showed that standby was running,
So i thought i would try uninstalling recently installed item one by one, i had recently installed some software called CALL RECORDER and although it was not showing up that it was running it was in the background after deleting this the problem was solved ,
So try and think if there are any apps that you have installed that may be running in the background but not showing up , i would advise deleting these one by one as i did and if it still doesnt work you can reinstall it ,
hope this helps
BUT EVEN AFTER ALL THIS I STILL LOVE MY N95 8GB !!!!!!!!!!!!!!!!!!!!!!!

Question regarding ONT connection via Ethernet and Cable cards

Hi,
We recently upgraded to Fios Quation 150Mbps/65 plan. We are not getting the advertised speeds (we only get like 5mbps upload) so verizon is sending a tech to switch the ONT connection from coax to ethernet.
I have 2 questions regarding this new setup:
1. If the ONT communicates with the Fios Actiontect router via ethernet instead of coax from now on, How will the set top boxes and Tivo-esque cable card powered device I currently have connected to coax, talk to the verizon system from now on, if coax is taken out of the equation? Will fios signal still flow through the internal coax wiring of the house? And moreover, I was under the impression that coax was the way set top boxes communicated and derived independent ip addresses from the Fios router, for on deman purposes and what not. How will this work from now on?
Quiestion 2.
Right next to the wall where the ONT sits, theres's a basement office where we have a PC that connects to the Fios system via an Actiontect MoCa adapter (ECB2500C) which I assume derives it internet connection from the Fios Actiontec router which sits upstairs in the living room.
Again, with the Coax about to be disabled next Friday in favor of ethernet connection from the ONT, I assume this PC will be left without internet because of the lack of internet signal in the coax? Is this correct?
Question 2.5 If my above assumption is correct, since this office is right on the other side of the wall where the ONT sits outside the house, would it be possible to run an ethernet wire through the wall that connects straight from the ONT to an ethernet switch inside the office, from which I would derive a connection for this basement PC (properly firewalled of course) and then, from said switch, continue running the ethernet wire that would ultimately reach the Actiontec Fios router upstairs from which the rest of the house derives it's internet? and would this setup affect in any way the propper functioning of the cable boxes in the house?
I'd appreciate your input and any help you can provide so I can have a ballpark idea of what to tell the Fios guy to do when he comes on Friday.
Cheers.
Solved!
Go to Solution.

It's not valid to have two devices connected to the ONT, PC and VZ Router. Must be a single device. The ONT locks onto the MAC Address of the first device it sees. Since you have TV you should have the VZ router as the internet facing router.
Other options:
1. Have the VZ Router located next to the PC in the basement and then use Wireless for all other PC's.
2. Have the VZ Router located next to the PC in the basement but run one wire upstairs and connect a switch where other PCs and devices can connect via a wire.
Hope that helps.

Unable to connect via wireless, printer is online.

I am using a Photosmart plus 209a via wireless. There are 3 notebooks connected. 2 will print but my Dell Studio (Win 7 Pro) will not. It was previously connected but now unable to connect. I have uninstalled all components using level 3 twice. Have used the Print/Scan tool. Downloaded the full SW package and the Basic driver SW. I process a job and it gets to the spooler and then "print job failed". I can view the control panel via IP address. I can view network settings and print wireless test page through HP Solution Center. Why am I unable to connect? I was able to use via USB but this is not an option.

It sounds like there is something different on the Dell Studio since it works from two other computers on the same network as the Dell Studio. It also sounds like you are able to access the EWS of the printer by using its IP address.
Are there any other errors messages regarding the printer? If so, what are they?
Is there a third party firewall installed (e.g. Norton, Kasperksy, BitDefender, etc.)?
Is this Windows 7 Professional 32bit or 64bit?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Unable to connect via airport all of a sudden

Unable to connect to the internet via airport all of a sudden. No changes to modem or router or network settings of macbook etc. Other devices in the house can connect just fine, but called cable support to verify and all is fine on the DSL end. Cannot download updates w/o internet connectivity. Have tried going thru the motions of setting up airport again and cannot get past the DHCP (can't remember exact letters at the moment) as my carrier is not a PPoE. Aside from reinstalling the OS to see if that will fix, does anyone else have any suggestions? Apparently this happens more often than I thought based upon other posts. Thank you!

Thank you for your help and it was a big help. I removed Norton software firewall, and firefox began to work. I thank you for your help and suggestion.
Dennis

Connecting Via Windows FTP Service

I recently moved several sites that used Contribute to a new
webserver (Windows 2003 running IIS 6). The server uses Windows FTP
Service.
To create a FTP account I created a Windows Account and then
a Virtual FTP directory with the same name as the windows user and
pointed that virtual directory at the root of the site I want to
update with contribute. I gave the Windows account full control on
the site root folder. I can FTP connect via Internet Explorer and
the command line.
When connecting via contribute I get an error saying
The directory you specified does not exist. Please make sure you
entered the directory name correctly. On some servers,
file/directory names are case sensitive"
Contribute seems to be trying to change directory to a folder
with the same name as the FTP virtual directory, rather than to the
folder that the virtual directory points at.
here's the error log from contribute
Date: 11/27/2006
LocalTime: 14:07
Host: 80.76.207.49
Port:
LoginID: myFTPUserName
Path: /myFTPUserName/
Passive Enabled: false
ProxyHost: NoneContribute Alternate Rename: no
Contribute Optimized: yes
======================== Test Results
==========================
NOTE: Microsoft FTP Service has been detected. For more
information on FTP server compatibility issues, please see
http://www.macromedia.com/support/contribute/ts/documents/ftp_info.htm
Login: SUCCESS!
Changing Directory To: /myFTPUserName/ Error. The directory
you specified does not exist. Please make sure you entered the
directory name correctly. On some servers, file/directory names are
case sensitive.
----------------------- FTP log from the last operation
> CWD /ftp
< 550 /ftp: The system cannot find the file specified.
> CWD /ftp/
< 550 /ftp: The system cannot find the file specified.
> CWD /
< 250 CWD command successful.
> RNFR ftp
< 550 ftp: The system cannot find the file specified.
> MDTM ftp
< 550 ftp: The system cannot find the file specified.

Hi!
I think the windows service is using a different systemaccount that your other application, and that account does not have rights to read the sbo-common database.
You can change the account used by your service on the service definition or in the SERVICES application of Windows.
Sir Harold

How to connect via null modem cable / console?

Hi
I need to connect from a laptop (solaris 10) to a sun fire v120 via null modem cable.
But I just can't get it work. I tried "tip hardwire" but it says "all ports busy". Looking for a solution I read that I should change in /etc/remote /dev/term/b into /dev/term/b....but this didn't help.
May anyone help me please?
Thank you very much in advance.

Guest wrote:
well the ports can't be busy, because I didn't use them......
>
You will get an "all ports busy" when tip fails to open the device. It is not the most descriptive of error messages.
I don't know what's wrong. Which command will I have to use to connect via console? And which configurations will I have to make?I'd check
a) that /dev/term/b exists
b) it is owned by uucp
Though I'm not exactly sure why you are using term/b, since most laptops don't have a second serial port, so I would presume that it would be term/b.

HT4108 How do I connect I 4 phone to Satellite model Toshiba Laptop. Tried connecting via normal charging cable into laptop & when try to open the web am advised 'The device has been disconnected or unavailable'. Amaysim is carrier.They have tethered phon

How do I connect i 4 to Satellite model Toshiba laptop. Tried connecting via cable via normal charging cable. When try yo open web advised 'this device has been disconnected or unavailable' AMAYSIM is carrier & advise they have tethered phone & should work?

Hi qwerty,
Dun tink that creative customer support sucks cos I had been dealing with them in the past and I can say that their service are quite gd and fast. If you wanted a refund, I tink you need to contact the store that sells you the product. Dun tink creative will refund you though.

How to solve unable to connect ipad issue

Has anyone been able to solve the unable to connect to network issue?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Ipad Air unable to connect via Citrix Receiver

Hello,
Has anyone been having issues since the beginning of the week with regards to connecting via the Citrix Receiver App? I just get cannot connect, it does launch the applications briefly but then bombs out.
Tried factory reset and upgrading to 8.1 but still same issue.
Did notice Citrix updated their app on Monday.
Thanks,

usb is a digital serial bus it does not carry analog audio to be able to do what you wish a program would have to run on both devices and I doubt that 3th party programs can get access to the usb port in ios
your best bet is to connect the minijack audio out connector of the ios device to a minijack analog input port like line or mic in on the mac
if a such does not exist then you can get usb audio cards for the computer which would have a 3.5mm minijack line in

[SOLVED] Unable to connect via an ftp cable with my acer Laptop

Similar Messages

Maybe you are looking for