[SOLVED] Unable to see certain glyphs in bitmap fonts

Could someone help me with the bitmap fonts? I am using the uushi font for the BAR: https://github.com/phallus/fonts
Although I've installed it and am able to use it in my terminal (termite), and SE the glyphs in gbdfed. I am unable to use the glyphs that are in the high 2xxx hex codes, such as the battery and the headphones icon.
any ideas? (also using infinality bundle, don't know if that affect things).
I even ensured that my termite is using the font. I can see some glyphs, but not all.
Edit: Turns out you have to do " echo -e \u2BFE" in the terminal and the copy and paste it.
Last edited by 3xOSC (2014-01-02 00:59:54)

Works on Mac CS6, but I have 0067 for unicode ID, and you have 0073, might be a recoding between systems i do not understand.
What happens if you copy from InDesign and paste to Illustrator. I did not find Opentype settings to affect this, but including in my screenshot incase that helps.
CS6 Mac Indesgin
CS6 Mac Illustrator
My Version
Funny was wondering If I even had that font, and was already open. Do not think hat is a system fonts.
I do not think this is ligatures, but another palette to check,

Similar Messages

Unable to see all glyphs in Illustrator CC 2014

I am using Illustrator CC 2014 on Windows 7 Ultimate.
When using the pro version of a font, I am not seeing all the possible glyphs in the glyphs panel. This has happened with several fonts. I can see all the glyphs in InDesign.
What am I doing wrong?
All help appreciated

Works on Mac CS6, but I have 0067 for unicode ID, and you have 0073, might be a recoding between systems i do not understand.
What happens if you copy from InDesign and paste to Illustrator. I did not find Opentype settings to affect this, but including in my screenshot incase that helps.
CS6 Mac Indesgin
CS6 Mac Illustrator
My Version
Funny was wondering If I even had that font, and was already open. Do not think hat is a system fonts.
I do not think this is ligatures, but another palette to check,

Unable to see certain folders on server after upgrading to mountain lion

Hello, I recently upgraded from lion to mountain lion on my MacBook Pro.
With lion I would connect to the server at work through finder under shared. Now with mountina lion, the server still shows up but when I connect to it only shows 3 folders there now when there are a lot more than that in there. I finally was able to connect to the folder I needed by hitting command + K and tryping out the path with smb.
The folder appears as an external disk icon when I connect to it like this so I guess maybe mountain lion recategorizes it as such and no longer displays it in finder when I connect to the server. Does anyone know how to fix this?

Hello nikkjazz. Welcome to the Apple Discussions!
The 802.11n AirPort Extreme Base Station (AEBSn) supports USB storage devices that use a block size of 512 bytes ... and is true whether the device is formatted for HFS+, FAT16 or FAT32. If yours is not, then it may explain why you can see the folders when the drive is directly attached to the Mac, but not so when connected to the AEBSn.

Unable to see certain pdf files--before I could-need help-please advise

I could download my bank statement and I am unable to do so..checked with bank and said problem was with Firefox not letting me do it..I could do it before..
== This happened ==
Every time Firefox opened
== about two weeks ago

Have you tried any of the solutions from [[Opening PDF files within Firefox]]?

10.9 unable to see share folders on 10.6.8

I have a mac mini running 10.6.8 being accessed via 10.9 iMac and I am unable to see certain shared folders.
I was checking on the Mac Mini an some folders have an extra space at the end of the filename. I remove the extra space, and now, I am able to see it on 10.9 iMac. I also notice that filename that contains "/" have the same issue.
I check on another computer running 10.8.5 and I can see all the folders that are list on the mac mini running 10.6.8.
Is this a common issue with 10.9 that it can't read "/" and an extra space at the end of a filename? Or is anybody else experiencing this issue?

Hey,
I have got a similar problem.
I use a NTFS-partition on OS X 10.9 and bootcamp.
I have had some folders on my shared NTFS harddisk with a "/" in the folders name. Example:"share/download".
Now all this folders disappeared and I can't see them anymore in OS. If I boot Windows via bootcamp, I can see the folders. The "/" is replaced with a ":", but the file location cannot be located and It is not possible to rename nor open nor anything.
For now all the data seems to be lost on OS and untouchable on windows...
I want my folders back!!

When I try to open mozilla firefox 11 I unable to see regional language fonts I install fonts but problem was not solved.So kindly provide solution.Thanking You

Respected Sir,
When I try to open mozilla firefox 11 I unable to see regional language fonts .So kindly provide solution.Thanking You

Did you post this problem with two different user names?
*[[/questions/924333]]
If you did then please continue in the other thread.

HP 7525 unable to see/connect to hidden secured SSD

I purchased a new HP 7525 All in one printer replacing an HP 7510 printer that recently died. I have updated the firmware of the printer and also am using the latest drivers from the HP website. I am installing on an iMac running 10.8.5.
During the installation procedure when configuring the wireless network (with the USB cable plugged in) the printer is unable to see my hidden network which operates at both 2 and 5 GHz and is secure via WPA2 passcode. Every other Mac, iPad, Apple TV and iPhone in our home uses this network (and have no connectivity issues). I have tried restarting the computer, printer and the router. I have reset the printer back to defaults. I have tried manually entering the network information directly into the printer (same unable to find error message). For those who do (rightfully) ask I am entering the SSID manually (since it is hidden) and am certain it is spelled and spaced properly.
The printer is able to successfully connect to my guest network with no security - that's not what I want though and doesn't suit our needs. Any help or direction is greatly appreciated before I decide to return and find an alternative product. Thank you very much and have a fantastic day.

Hi,
No, it can't see 5GHz networks, it can only see 2.4GHz networks and it supports:
Wireless network: 802.11b, 802.11g, and 802.11n supported.
as shown in the following specs:
http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?tmp_rule=58988&tmp_task=prodinfoCategory&cc=u...
You can get your router to broacast BOTH bands and this will be ok. (I'm using the same)
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Unable to see other writer's checked check boxes in comments of shared review

I'm using Acrobat 3D Version 8 in a Windows XP environment. We are using SharePoint for shared reviews.
We are able to see developer's comments, and we can respond back to the comments with a reply. However, when we use the checkbox to indicate that a comment has been addressed, each writer can only see the checkmarks that she makes. We cannot see checkmarks made by other writers.
We have tried selecting the check box, and we have also used the check box icon to select the check box. We then publish and the the action is accepted as a comment and is published. But we are unable to see each other's check boxes.
Why?
Thanks!

Solved on my own.
Simply close BEx Analyzer and restart it again. If still it doesn't work then restart your computer and then run BEx Analyzer again, it will definitely work.
TR.

Unable to see Java 5 features from Doclet API

The Doclet API was extended in Java 5 for getting information in generics, but I have been unable to get it to work. For example, calling ClassDoc.typeParameters and typeParamTags always returns an empty array.
* @param <X> The X
public class Test<X> {
}And the Doclet is:
import com.sun.javadoc.*;
public class TestDoc extends Doclet {
    public static boolean start(RootDoc root) {
        for (ClassDoc cd : root.classes()) {
            System.out.println();
            System.out.println(cd);
            TypeVariable[] tv = cd.typeParameters();
         if (tv.length == 0) {
          System.out.println("No type parameters");
         } else {
          for (TypeVariable t : tv) {
              System.out.println("tv: " + t);
         ParamTag[] pt = cd.typeParamTags();
         if (pt.length == 0) {
          System.out.println("No type parameter tags");
         } else {
          for (ParamTag t : pt) {
              System.out.println("pt: " + t);
        return true;
}For the Test class, it always prints out:
No type parameters
No type parameter tagsI'm running version 1.5.0_05. Is there some magic flag that needs to get passed? I have been unable to see any evidence that the new Java 5 API does anything at all.

Implementing
     public static LanguageVersion languageVersion() {
          return LanguageVersion.JAVA_1_5;
in my extension doclet solved the problem. Is part of the transition documentation from javadoc 1.2 to javadoc 1.5, but can not easily be found, not even a useful hint link.

I am unable to see any POP3 or IMAP tab when I set up an account in my iphone 4S. Hence by default all my email accounts become IMAP and the messages are deleted from the server when I delete them from the iphone.

I am unable to see any POP3 or IMAP tab when I set up an account in my iphone 4S. Hence by default all my email accounts become IMAP and the messages are deleted from the server when I delete them from the iphone.

ok sorry everyone but i solved it myself but the solution is so nuts i've posted it here to help others who have the same problem.
to setup a comcast imap account on your iphone:
go to mail, contacts, etc in settings
under accts, select add account
select "other"
new screen, choose "add mail account"
now on the new acct screen you must enter your name, email address and password for your GMAIL acct ! (yes i said your gmail acct !, or some other acct with a NON comcast address).
hit next
then the acct verifies
when verified a screen will open with all the acct settings for this acct AND @ the top of the screen are the 2 buttons > imap or POP
select imap and THEN CHANGE ALL THE ACCOUNT information to the comcast account !
then hit next and the account will take a couple minutes to verify but it will verify and now you have a comcast imap acct set up on your iphone. The problem must be that when the iphone sends the initial verify acct info to comcast (if you enter that information first) the comcast server is simply not setup yet to signal the iphone that there is an imap option.

Unable to see myplugin in Windows-- Extension File Menu of InDesign while Debugging/ Run .

I couldn't able to see myplugin extesnion under file menu of Windows-->Extension of my MAC while i try to run or debug .
-myplugin.zxp is provided to my testing team and they are able to see it under file menu of Window-->Extension   as expected .
-But this is not happening on my mac when i try to run/debug my application .
Mac
: CS 5.5 and Extesnion Builder 1.5   . (version 7.5.3)
This was the same problem i faced on windows , seems it was due to the latest updates taken by users . ...But the problem was solved by changing version from 7.5 to 7.5.3 in manifest file while Exporting the build .
- To run/debug i will revert back version from 7.5.3 to 7.5 after providing the zxp , since my indesign version is 7.5 on Windows system .
Windows : CS 5.5 and Extesnion Builder 1.5 . (version 7.5)
Can some please suggest me or point me something on this .
Thanks ,
Sai Charan

Am facing another Interrelated problem with CS6 too -->Issue 2 :
   -if inDesign users take update for InDesign Version 8.0.1 [since CS6 version would be 8.0 by default ] Users Unable to See myplugin.zxp in Windows-->Extesnion .
- I Exported myplugin.zxp using InDesign CS6 Version 8.0 / Flash Builder 4.5/ Extesnion Builder 2.0 .
- This worked in all below lowest versions perfectly but not with InDesign CS6 updated Version 8.0.1
Windows 7PC :
1) CS6 -->-- Adobe Extension Manager CS6 Version 6.0.0.412
          -- Adobe In Design CS6 Version 8.0
2)CS5.5-->-- Adobe Extension Manager CS5.5 Version 5.5.163
          -- Adobe InDesign CS5.5 Version 7.5
3)CS5.5-->-- Adobe Extension Manager CS5.5 Version 5.5.1.019
          -- Adobe In Design CS5.5 Version 7.5.3
Mac Operating System :
1) CS6 --> -- Adobe Extension Manager CS6 Version 6.0.0.412
           -- Adobe In Design CS6 Version 8.0
           -- Mac OS :10.7.4
2)CS5.5--> -- Adobe Extension Manager CS5.5 Version 5.5.163
           -- Adobe InDesign CS5.5 Version 7.5.3
           -- Mac OS :10.6.8

Unable to see the pageviewer in a page from pages library in a custom page layout

<File Url="Inbox.aspx" Type="GhostableInLibrary" Level="Published" Path="myPages\Pages\Inbox.aspx" >
<AllUsersWebPart WebPartOrder="0" WebPartZoneID="Header" ID="inboxwp1">
<![CDATA[<WebPart xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://schemas.microsoft.com/WebPart/v2">
<Title>Inbox</Title>
<FrameType>Default</FrameType>
<Description>Displays another Web page on this Web page. The other Web page is presented in an IFrame.</Description>
<IsIncluded>true</IsIncluded>
<ZoneID>wpz</ZoneID>
<PartOrder>0</PartOrder>
<FrameState>Normal</FrameState>
<Height></Height>
<Width />
<AllowRemove>true</AllowRemove>
<AllowZoneChange>true</AllowZoneChange>
<AllowMinimize>true</AllowMinimize>
<AllowConnect>true</AllowConnect>
<AllowEdit>true</AllowEdit>
<AllowHide>true</AllowHide>
<IsVisible>true</IsVisible>
<DetailLink />
<HelpLink />
<HelpMode>Modeless</HelpMode>
<Dir>Default</Dir>
<PartImageSmall />
<MissingAssembly>Cannot import this Web Part.</MissingAssembly>
<PartImageLarge>/_layouts/15/images/mscntvwl.gif</PartImageLarge>
<IsIncludedFilter />
<Assembly>Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c</Assembly>
<TypeName>Microsoft.SharePoint.WebPartPages.PageViewerWebPart</TypeName>
<ContentLink xmlns="http://schemas.microsoft.com/WebPart/v2/PageViewer">/_layouts/15/AppPages/InboxRedirectPage.aspx</ContentLink>
<SourceType xmlns="http://schemas.microsoft.com/WebPart/v2/PageViewer">URL</SourceType>
</WebPart>]]>
</AllUsersWebPart>
<AllUsersWebPart WebPartOrder="0" WebPartZoneID="LeftWP" ID="wpLeft">
<![CDATA[
<webParts>
<webPart xmlns="http://schemas.microsoft.com/WebPart/v3">
<metaData>
<type name="myWebParts.ProjectLinks.ProjectLinks, m, Version=1.0.0.0, Culture=neutral, PublicKeyToken=52f3214933d771f7" />
<importErrorMessage>$Resources:core,ImportErrorMessage;</importErrorMessage>
</metaData>
<data>
<properties>
<property name="Title" type="string">myprojectLinks</property>
<property name="Description" type="string">My Visual Web Part</property>
</properties>
</data>
</webPart>
</webParts>
]]>
</AllUsersWebPart>
<Property Name="ContentTypeId" Value="0x010100C568DB52D9D0A14D9B2FDCC96666E9F2007948130EC3DB064584E219954237AF390076F7B5D03DD146D699D042E1C5D76EF7" />
<Property Name="FileLeafRef" Value="Inbox.aspx" />
<Property Name="Title" Value="Inbox" />
<Property Name="PublishingPageLayout" Value="~SiteCollection/_catalogs/masterpage/myPageLayout/myPage.aspx, my custom Page Template"/>
<Property Name="ContentType" Value="myPageCT" />
<Property Name="_ModerationStatus" Value="3" />
<Property Name="FileDirRef" Value="Pages" />
<Property Name="FSObjType" Value="0" />
</File>
I have created a custom page layout in my site collec. using VS 2012 and deployed am able to see the page in the pages lib [inbox.aspx].
Here, I have added a page viewer web part and I want to redirect to another application page, which is already coded [inboxredirect.aspx] in my solution[its another dll - another SP solution which has appln pages and web parts
etc - ]
The issue is that, i am unable to see the page viewer web part when the page is displayed. inbox.aspx is a page which is created once my custompagelayouts solution is deployed and when i navigate to this page, i am stuck . i am getting
the " access denied " message is displayed.
can anyone help why this error is displayed?
in my inboxredirect.aspx page i am inherting from unsecuredlayoutspagebase class, so i dont think , access denied message should come.
using System;
using System.Configuration;
using Microsoft.SharePoint;
using Microsoft.SharePoint.WebControls;
namespace myproj.Layouts.AppPages
public partial class InboxRedirectPage : UnsecuredLayoutsPageBase
string projectName = string.Empty;
protected void Page_Load(object sender, EventArgs e)
string siteUrl = SPContext.Current.Web.Url;
using (SPSite site = new SPSite(siteUrl))
using (SPWeb web = site.OpenWeb())
string urlProjectName =Request.UrlReferrer.ToString();
projectName = urlProjectName.Split('/')[5];
//end
SPUser user = web.CurrentUser;
if (user != null)
above is my appln page to which i am redirecting.

Solved it myself guys... (Well the major part)
Got help from here...
https://www.nothingbutsharepoint.com/sites/devwiki/articles/pages/blank-open-save-dialog-when-browsing-document-library-from-office-clients.aspx
and
http://www.sharepointconfig.com/2011/02/vs2010-list-definition-template-missing-file-dialog-view/
with some tweaks of my own..
Still working on it because its showing SharePoint 2010 header... And I need 2013 look...

SAP Authorization: unable to see change logs for role assignments

Hi ,
please do help us in this regards .
When trying to find the changes update to certain role . We are unable to see that changes/ hope the changes are note gettng updated.
we recive the message " NO CHAGE DOCUMENT FOUND TO MATCH SPECIFIED CRITERIA"
MESSAGE NO .CD887.
Please let us know how can this be sorted.
Best Regards,
Rahul.

Hi,
As per your query you can get this info in suim and when you modify any role the you have to activate this.
Anil

Unable to see pdf files with Lion upgrade

Since upgarding to Lion I've been unable to see my bank e-statements in Safari or Firefox. When the pdf file appears to load the result is a black statement in Safari and a white screen in Firefox. A right click does not allow me to download the file for viewing. When I spoke with their electronic support the said they have had many calls regarding this problem with newest OS X Lion upgrades. His suggestion was to uninstall or remove Adobe Reader v10.1.1 and allow Safari to read the files. Has anyone found a solution to this problem rather than completely abandoning Adobe Reader?

Hi BDAqua,
Thanks for the info, I dragged a PDF to desktop ctrl-, get info. change all to open with adobe.
Problem solved, many thanks for a quick response.
Barry69

[SOLVED] VIM not displaying many glyphs

I'm struggling to get the full glyph set to display in VIM. Particularly missed are the mathematical super- and sub-script. I've worked on the problem and tried various fixes for displaying UTF-8 characters without success.
(Code block bad form? Ok T. IMHO. There's that type of post where the OP doesn't know why something isn't working and they quote a dump truck of details, even though they're not sure what's relevant and what isn't. And the longer the quote, the harder it is to figure out what they're doing wrong. I didn't want to be that guy. I was hiding the verbosity, in the event my font problems are simpler than I've made it.)
1) Applied settings from these WIKI pages:
Fonts
Xterm
2) Apps I've installed
$ pacman -Qs font
local/dina-font 2.92-4
A monospace bitmap font, primarily aimed at programmers
local/fontconfig 2.11.1-1
A library for configuring and customizing font access
local/fontsproto 2.1.3-1
X11 font extension wire protocol
local/freetype2 2.5.3-2
TrueType font rendering library
local/gsfonts 1.0.7pre44-4
Standard Ghostscript Type1 fonts from URW
local/libfontenc 1.1.2-1
X11 font encoding library
local/libotf 0.9.13-2
OpenType Font library
local/libxfont 1.4.7-3
X11 font rasterisation library
local/libxft 2.3.2-1
FreeType-based font drawing library for X
local/t1lib 5.1.2-5
Library for generating character- and string-glyphs from Adobe Type 1 fonts
local/tamsyn-font 1.10-1
A monospaced bitmap font for the console and X11
local/terminus-font 4.39-1
Monospace bitmap font (for X11 and console)
local/ttf-bitstream-vera 1.10-10
Bitstream vera fonts
local/ttf-droid 20121017-3
General-purpose fonts released by Google as part of Android
local/xorg-bdftopcf 1.0.4-2 (xorg xorg-apps)
Convert X font from Bitmap Distribution Format to Portable Compiled Format
local/xorg-font-util 1.3.0-2 (xorg-fonts xorg)
X.Org font utilities
local/xorg-font-utils 7.6-4
Transitional package depending on xorg font utilities
local/xorg-fonts-100dpi 1.0.1-5 (xorg)
X.org 100dpi fonts
local/xorg-fonts-alias 1.0.3-1
X.org font alias files
local/xorg-fonts-encodings 1.0.4-4 (xorg-fonts xorg)
X.org font encoding files
local/xorg-fonts-misc 1.0.1-3
X.org misc fonts
local/xorg-fonts-type1 7.4-3
X.org Type1 fonts
local/xorg-mkfontdir 1.0.7-2 (xorg xorg-apps)
Create an index of X font files in a directory
local/xorg-mkfontscale 1.1.1-1 (xorg-apps xorg)
Create an index of scalable font files for X
3) A forum search found some common issues:
unicode symbols not working in my terminal
$ localectl
System Locale: LANG=en_US.UTF-8
LC_COLLATE=C
VC Keymap: US
X11 Layout: n/a
$ locale -a
C
en_US.utf8
POSIX
$ echo $TERM
xterm-256color
4) ~/.Xresources
! wiki.archlinux.org/.../Xterm
xterm*termName: xterm-256color
xterm*locale: true
xterm*saveLines: 4096
xterm*bellIsUrgent: false
xterm*VT100.geometry: 80x25
xterm*faceName: Droid:style=Regular:size=12
xterm*dynamicColors: true
xterm*utf8: 2
xterm*toolBar: false
5) ~/.xinitrc
# X11 Fonts
xset +fp /usr/share/fonts
Last edited by xtian (2014-07-27 14:43:23)

Linux fonts are a muddle. Consoles can only display 256 characters, maybe 512. You simply cannot display many texts in a console. To navigate through the font mess in X, you need some familiarity with fontconfig. Xft uses fontconfig to select fonts. Fontconfig documentation is not user-friendly.
Droid is a family of fonts. My installation of the Droid family includes 27 different fonts. The command fc-list will list fonts matching a pattern. I usually filter the output by piping through grep. To list the Droid fonts, file name first followed by the fontconfig name, I use:
$ fc-list | grep Droid
Your fc-match results for Droid are from fontconfig doing its best to give you a readable display. Fontconfig cannot find a matching font for the name 'Droid', so it falls back to a "safe" font, 'Bitstream Vera Sans'.
XTerm or UXTerm or URxvt
I have my locale correctly configured, I think. I do not see any real advantage for uxterm over xterm. In my X resources, I include the lines,
xterm*termName: xterm-256color
XTerm*locale: true
For good glyph coverage with xterm, I have found 'DejaVu Sans Mono' to be among the better fonts. If I truly need utf8 coverage, I use urxvt. Urxvt allows one to use a ladder of fonts. If the character is not found in the first font listed, urxvt will search through the other listed fonts until it finds a glyph that can be displayed.
urxvt*font: xft:DejaVu Sans Mono:style=Book:antialias=false:size=8, \
xft:WenQuanYi Bitmap Song:size=8, \
xft:FreeSerif:style=Regular, \
xft:unifont:style=Medium:antialias=false
Here's a screenshot with three xterms using Droid, DejaVu Sans Mono, and Liberation Mono, plus one urxvt using the fonts in the code above. They all show the same portion of Markus Kuhn's utf8 test text.

[SOLVED] Unable to see certain glyphs in bitmap fonts

Similar Messages

Maybe you are looking for