[Solved] Unable to set bluetooth stick on laptop

Hi everyone.
I am trying to set my bluetooth usb device, as it is sad in the wiki, but I am not able to get it run.
When I plug my bluetooth stick, I got that in my /var/log/messages.log
Jul 7 14:38:34 tangra usbcore: registered new interface driver hci_usb
and this is what I have in my /var/log/messages.log when I start the bluetooth daemon:
Jul 7 14:38:24 tangra usb 2-2: new full speed USB device using uhci_hcd and address 2
Jul 7 14:38:34 tangra usb 2-2: configuration #1 chosen from 1 choice
Jul 7 14:38:34 tangra Bluetooth: Core ver 2.11
Jul 7 14:38:34 tangra NET: Registered protocol family 31
Jul 7 14:38:34 tangra Bluetooth: HCI device and connection manager initialized
Jul 7 14:38:34 tangra Bluetooth: HCI socket layer initialized
Jul 7 14:38:34 tangra Bluetooth: HCI USB driver ver 2.9
Jul 7 14:38:34 tangra usbcore: registered new interface driver hci_usb
Jul 7 14:41:51 tangra hcid[4165]: Bluetooth HCI daemon
This is what I have, when I write lsusb:
Bus 004 Device 001: ID 1d6b:0002
Bus 005 Device 001: ID 1d6b:0001
Bus 003 Device 001: ID 1d6b:0001
Bus 002 Device 002: ID 1131:1001 Integrated System Solution Corp. KY-BT100 Bluetooth Adapter
Bus 002 Device 001: ID 1d6b:0001
Bus 001 Device 001: ID 1d6b:0001
After I plug the device, I am running /etc/rc.d/bluetooth start, and everything seems to be in order, but when I type "hcitool dev" I got nothing displayed. I red the wiki, and I have bluez installed. Where is my mistake. Do I need some software, or... I do not know what. It is my first time when I am using bluetooth in my life.
Regards.
Last edited by Gruntz (2008-07-07 12:43:44)

Hi
I solved the problem. You need to "hciconfig hci0 up", before run "hcitool dev" and see the device, or "hcitool scan" to scan for bluetooth devices in range.
Do you know how to brows the files on my mobile phone. I have no gnome or kde.
Regards.
Last edited by Gruntz (2008-07-07 12:44:48)

Similar Messages

[SOLVED] Unable to set up wireless connection (wiki read)

Well, as you can see that's my 1st post. That's why I want, at first, congratulate the community for the amazing wiki and forums. It helped so much.
But I'm writing here because I have a problem that I'm unable to resolve with the wiki: The wireless connection. It doesn't work.
Now I will post my hardware and some software:
ASUS Eeepc 1000
01:00.0 Network controller: Ralink corp. RT2860 (as # lspci | grep -i net says)
03:00.0 Ethernet controller: Atheros Communications AR8121/AR8113/AR8114 Gigabit or Faster Ethernet (rev b0) (as # lspci | grep -i net says)
Linux Kernel 3.2.4-1-ARCH (as # uname -r says)
I3 window manager
wireless_tools and wpa_supplicant installed
(If you want to know something more, ask me)
The wireless is enabled in the BIOS and the led indicator is on.
Being the network controller RT2860, must I do something special? I tried to blacklist what the wiki says with no results.
I have no problems with wired connection, but I can't set up my wireless connection with the # ip link set wlan0 up command (and yes, I execute this command as su or with sudo). I3 corroborates it in the status bar: W: down.
# ip link list
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
( I had it disconnected when I did this check)2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000 link/ether 00:22:15:08:af:e2 brd ff:ff:ff:ff:ff:ff
3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN qlen 1000 link/ether 00:15:af:ba:39:b8 brd ff:ff:ff:ff:ff:ff
I tried a lot of thing, but no results at all. Must I configure manually some file like wpa_supplicant.conf, rc.conf or others? It is normal that in rc.conf, NETWORKING tab, the only interface is eth0 (interface=eth0) with no other references to wlan0?
Thanks for your attention.
Last edited by Agravain (2012-02-20 17:42:52)

That thing on the wiki about blacklisting is probably outdated, it's from the times the kernel had two Ralink drivers. Now there's only one, and you should not blacklist anything.
rc.conf is only for wired interfaces. For wireless you can do stuff manually, or use a manager - netcfg, wicd, networkmanager.
And that's that. For further help, you'll have to provide details about which commands you used and what their output is.
Last edited by Gusar (2012-02-20 16:15:04)

[Solved]Unable to set default browser

Using XFCE I can set the default browser from settings/Preferred Applications to either google chrome or firefox both of which are installed. I set chrome as preferred and can get online no problem. The setting will stay for sometimes days or maybe a few minutes before the system 'forgets' what preference has been set and reverts to no preference set.
Using thunderbird to open links in emails always opens Firefox despite the default browser being set to chrome. In fact firefox always stays set as default browser under preferences/general and I can have firefox and chrome open at the same time with both claiming they are the default browser. If I set the system preference to firefox then open chrome it detects it is not the default browser and allws me to set it as default, this always seems to set the system preferences to not set so it removes firefox but not not set chrome, if I then open firefox it does not give the message about not being the default but checking in preferences/general it is already set as default.
I seem to be going around in circles for the last few weeks, can someone point me in the right direction?
Last edited by weedfreak (2012-09-23 09:43:11)

Well I had also tried using XFCE Preferred application to set it and that also did not work, there was also an anomaly with the menu entry for Web Browser, it always claimed there was no preference set and I needed to select the session browser from the list.
The link provided was not really a lot of help directly, but it did point out that xdg-open is broken and gave me some directions to search in, eventually I found the ~/.local/applications/mimeapp.list contained a lot of references to firefox that stayed in place even if preferences were changed, they were listed before the chrome entries. I deleted every line with firefox in then when I tried a link from Thunderbird I was asked to choose a browser and the change stuck, the web browser menu link also works correctly.
Not sure if this is really solved or if it is a workaround but I'll mark it solved.

[SOLVED] Unable to set default application to open files

Hello,
Whenever I try to set a default application for a file type (an avi for example) by right-clicking the file in Nautilus and choosing Open with Other Application, I can select the application (in this case VLC), check the Remember this Application checkbox and click Open, I always get the below message:
Could not set application as the default: Can't create user application configuration folder /root/.local/share/applications: Permission denied
I'm not logged in as root (confirmed with "whoami") so I'm not sure why it's trying to access the root home folder.
I'm thinking this is simply a misconfigured path statement (forgive the Windows terminology) but I'm not sure where to start looking. Any help would be most appreciated.
Thanks!
Beta
Last edited by betawind (2010-07-09 00:10:58)

Thanks for the reply ngoonee!
The situation has already changed a bit. Still being in Windows mode, I decided to try a reboot. After rebooting I no longer get the error I was before (I wonder if it had something to do with logging in initially as root then su'ing to my user account) but the association with vlc just isn't sticking.
I noticed though that now when I right-click on a video file I get the option to "Open with Movie Player" as well as "Open with VLC media player" (which does do what it's supposed to), which wasn't there before. For grins I went and set the preferred multimedia app to VLC through System > Preferences > Preferred Applications, but that didn't help.
Is there a place these preferences are stored that I might take a peek at?
Last edited by betawind (2010-07-09 00:04:56)

SOLVED: Unable to set Destination URI to URL stored in a VO attribute

Hi OAF Gurus,
I want to set destination URI for a message styled text bean in my custom OAF page, such that on clicking the link a popup window comes up with an external url. This external url is record specific and is stored in a db table. I have access to this url thru a VO attribute on my page.
If I set destination URI declaratively using a static url, it works fine for me. However when I try to pick up the destination url from VO attribute, fwk is prefixing "http://server:port/" to the url and consequently making it an invalid url.
Please suggest a way to stop fwk from prefixing "http://server:port/" to the url stored in my VO attribute.
What works:
Destination URI:
javascript:var a = window.open('http://www.google.com/', 'a','height=500,width=900,status=yes,toolbar=no,menubar=no,location=no'); a.focus();
What doesn't work:
Destination URI:
javascript:var a = window.open('{@BpelInstanceUrl}', 'a','height=500,width=900,status=yes,toolbar=no,menubar=no,location=no'); a.focus();
VO attribute BpelInstanceUrl has value "http://www.google.com/".
When I specify the above destination uri using VO attribute 'BpelInstanceUrl', I get the following url on the link:
javascript:var a = window.open('http%u003a//www.google.com/', 'a','height=500,width=900,status=yes,toolbar=no,menubar=no,location=no'); a.focus();
I searched the forum, but couldn't find any discussion on setting destination uri to an external url based on the value of a VO attribute.
Thanks for the help. Waiting for your valuable inputs.

Shiv,
I don't think your suggestion will work, because jsp redirect which framework will use internally will take default port number if fully qualified url(like http://www.google.com/') is not used.So, Ritesh will have the same problem as he mentioned.
Now, Ritesh coming back to your problem, the solution is to attach the fully qualified url in the table component at runtime. This will help you in two forms:
1)There will be no MAC key validation for your javascript generated url.
2)Your fully qauilified url will be attached to url property at runtime, so would not face the current problem.
Hence you need to use bound values api. Here is the sample code:
OATableBean tableBean =
(OATableBean)webBean.findChildRecursive("<table item id>");
OAMessageStyledTextBean m= (OAMessageStyledTextBean)tableBean.findChildRecursive("<message styled text in table item id>");
OADataBoundValueViewObject tip1 = new OADataBoundValueViewObject(m, "<vo attr name which stores url for each row>");
m.setAttributeValue(oracle.cabo.ui.UIConstants.DESTINATION_ATTR, tip1);
I hope i am clear.
--Mukul

[Solved] Unable to set preferred credentials

(Windows 2003, SP2 for all computers ... locked down by local administrators) Grid Control Rel 2 with patches (but not up to R3).
I created a test userid, made it part of the local administration group, added it to the 4 required privileges "log on as batch", "replace process level token", "act as part of OS", and "adjust memory quotas". When I attempt to set te preferred credentials, I get the error
"Connection to cepaoas63.COE.ADS as user test failed."
That's all. No reason is given, as indicated by some of the other similar queries.
Questions:
- Any other privs normally required (and possibly normally given to administrators)?
- Any other policy setting your can think of that might defeat this?
- Any firewall stuff that might have an effect?
Message was edited by:
Hans Forbrich
Patch 4703814

From emoms trace file:
2007-05-02 15:14:48,921 [EMUI_15_14_44_/console/pref/setCredentials$targetType=host] ERROR creds.SetPrefCreds testCreds.1298 - SetPrefCreds.testCreds(): CredsException: Connection to gdntlnx1.guident.com as user oracle failed.
2007-05-02 15:15:10,796 [EMUI_15_15_06_/console/pref/setCredentials$targetType=host] ERROR creds.SetPrefCreds testCreds.1298 - SetPrefCreds.testCreds(): CredsException: Connection to gdntlnx1.guident.com as user oracle failed.
2007-05-02 15:15:29,171 [EMUI_15_15_27_/console/pref/setCredentials$targetType=host] ERROR creds.SetPrefCreds testCreds.1298 - SetPrefCreds.testCreds(): CredsException: Connection to oraclebi.guident.com as user oracle failed.
[EMUI_15_38_07_/console/monitoring/hostOverview$ctxType=Hosts$type=host$target=gdntlnx1.guident.com] ERROR host.HostOverviewDataObject getLogonInfo.2340 - IOException in sending Request :: Connection refused: connect
oracle.sysman.emSDK.emd.comm.CommException: IOException in sending Request :: Connection refused: connect
     at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest_(EMDClient.java:1726)
     at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest(EMDClient.java:1622)
     at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest(EMDClient.java:1545)
     at oracle.sysman.emSDK.emd.comm.EMDClient.getMetrics(EMDClient.java:913)
     at oracle.sysman.eml.mntr.host.HostOverviewDataObject.getLogonInfo(HostOverviewDataObject.java:2282)
     at oracle.sysman.eml.mntr.host.HostOverviewDataObject.getHostInfo(HostOverviewDataObject.java:2223)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at oracle.cabo.ui.data.provider.MethodDataProvider.getDataObject(Unknown Source)
     at oracle.cabo.ui.data.provider.TableDataProvider.getDataObject(Unknown Source)
     at oracle.cabo.ui.data.provider.CachingDataProvider.getDataObject(Unknown Source)
     at oracle.cabo.ui.data.provider.DataProviderStack.getDataObject(Unknown Source)
     at oracle.cabo.ui.LogicalNodeRenderingContext.getDataObject(Unknown Source)
     at oracle.cabo.ui.RootRenderingContext.getDataObject(Unknown Source)
     at oracle.cabo.ui.LogicalNodeRenderingContext.getDataObject(Unknown Source)
     at oracle.cabo.ui.RootRenderingContext.getDataObject(Unknown Source)
     at oracle.cabo.ui.data.DataBoundValue.getValue(Unknown Source)
     at oracle.cabo.ui.BaseUINode.getAttributeValueImpl(Unknown Source)
     at oracle.cabo.ui.BaseUINode.getAttributeValue(Unknown Source)
     at oracle.cabo.ui.laf.base.TextRenderer.renderContent(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderContent(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderContent(Unknown Source)
     at oracle.cabo.ui.laf.base.DataScopeRenderer.renderContent(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderContent(Unknown Source)
     at oracle.cabo.ui.laf.base.xhtml.BodyRenderer.renderContent(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderContent(Unknown Source)
     at oracle.cabo.ui.laf.base.xhtml.DocumentRenderer.renderContent(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
     at oracle.cabo.ui.laf.base.xhtml.DocumentRenderer.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.servlet.ui.UINodePageRenderer.renderPage(Unknown Source)
     at oracle.cabo.servlet.AbstractPageBroker.renderPage(Unknown Source)
     at oracle.cabo.servlet.PageBrokerHandler.handleRequest(Unknown Source)
     at oracle.cabo.servlet.UIXServlet.doGet(Unknown Source)
     at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:377)
     at oracle.sysman.eml.app.Console.doGet(Console.java:318)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:88)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
     at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:122)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
     at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:102)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
     at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:336)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:659)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)
2007-05-02 15:38:38,234 [EMUI_15_38_33_/console/monitoring/hostOverview$selTab=0$target=gdntlnx1.guident.com$type=host] ERROR host.HostOverviewDataObject getLogonInfo.2340 - IOException in sending Request :: Connection refused: connect
oracle.sysman.emSDK.emd.comm.CommException: IOException in sending Request :: Connection refused: connect
     at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest_(EMDClient.java:1726)
     at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest(EMDClient.java:1622)
     at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest(EMDClient.java:1545)
     at oracle.sysman.emSDK.emd.comm.EMDClient.getMetrics(EMDClient.java:913)
     at oracle.sysman.eml.mntr.host.HostOverviewDataObject.getLogonInfo(HostOverviewDataObject.java:2282)
     at oracle.sysman.eml.mntr.host.HostOverviewDataObject.getHostInfo(HostOverviewDataObject.java:2223)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at oracle.cabo.ui.data.provider.MethodDataProvider.getDataObject(Unknown Source)
     at oracle.cabo.ui.data.provider.TableDataProvider.getDataObject(Unknown Source)
     at oracle.cabo.ui.data.provider.CachingDataProvider.getDataObject(Unknown Source)
     at oracle.cabo.ui.data.provider.DataProviderStack.getDataObject(Unknown Source)
     at oracle.cabo.ui.LogicalNodeRenderingContext.getDataObject(Unknown Source)
     at oracle.cabo.ui.RootRenderingContext.getDataObject(Unknown Source)
     at oracle.cabo.ui.LogicalNodeRenderingContext.getDataObject(Unknown Source)
     at oracle.cabo.ui.RootRenderingContext.getDataObject(Unknown Source)
     at oracle.cabo.ui.data.DataBoundValue.getValue(Unknown Source)
     at oracle.cabo.ui.BaseUINode.getAttributeValueImpl(Unknown Source)
     at oracle.cabo.ui.BaseUINode.getAttributeValue(Unknown Source)
     at oracle.cabo.ui.laf.base.TextRenderer.renderContent(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderContent(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderContent(Unknown Source)
     at oracle.cabo.ui.laf.base.DataScopeRenderer.renderContent(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderContent(Unknown Source)
     at oracle.cabo.ui.laf.base.xhtml.BodyRenderer.renderContent(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderContent(Unknown Source)
     at oracle.cabo.ui.laf.base.xhtml.DocumentRenderer.renderContent(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
     at oracle.cabo.ui.laf.base.xhtml.DocumentRenderer.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.servlet.ui.UINodePageRenderer.renderPage(Unknown Source)
     at oracle.cabo.servlet.AbstractPageBroker.renderPage(Unknown Source)
     at oracle.cabo.servlet.PageBrokerHandler.handleRequest(Unknown Source)
     at oracle.cabo.servlet.UIXServlet.doGet(Unknown Source)
     at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:377)
     at oracle.sysman.eml.app.Console.doGet(Console.java:318)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:88)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
     at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:122)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
     at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:102)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
     at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:336)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:659)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)
OEM Grid Control Version is: 10.2.0.2
Windows Version is: Windows XP Professional Version 2002 SP2
I had no issues with installing this version 10.2.0.2. My remote agents are uploading information back to OEM and I can see this information in OEM. I just cannot set the host preferred credentials which means I cannot take advantage of the maintenance features like scheduling a backup.
I originally tried to install 10.2.0.2 and upgrade to 10.2.0.3 but the OEM wasn't working after I did the uprade. So I did a fresh install on another server and just stayed at 10.2.0.2. I don't have a requirement to be at any particular version.

[SOLVED]unable to set/view timezone

A few days ago the time on my computer changed, it was 1 hour late. Since today the dalight saving started/ended in Hungary its now 2 hours late. I tought that I might have misconfigured the timezone, so I trie dto change it as its writtten in this wiki, but if I try timedatectl status or timedatectl set-timezone Europe/Budapest I get
[matyilona@localhost ~]$ timedatectl set-timezone Europe/Budapest
Failed to issue method call: Launch helper exited with unknown return code 1
[matyilona@localhost ~]$ timedatectl status
Failed to issue method call: Launch helper exited with unknown return code 1
Whats wrong?
Last edited by matyilona200 (2012-10-29 18:31:25)

Yes I'm using initsripts. theres the output:
[matyilona@localhost ~]$ ls -l /etc/localtime
lrwxrwxrwx 1 root root 35 Jun 21 12:39 /etc/localtime -> /usr/share/zoneinfo/Europe/Budapest
[matyilona@localhost ~]$ hwclock -D
hwclock from util-linux 2.22.1
Using /dev interface to clock.
Last drift adjustment done at 0 seconds after 1969
Last calibration done at 0 seconds after 1969
Hardware clock is on UTC time
Assuming hardware clock is kept in UTC time.
Waiting for clock tick...
...got clock tick
Time read from Hardware Clock: 2012/10/29 18:00:53
Hw clock time : 2012/10/29 18:00:53 = 1351533653 seconds since 1969
Mon 29 Oct 2012 07:00:53 PM CET -0.949399 seconds
Edit: Yesterday I tried editing /etc/adjtime, it didnt work, so I changed it back to original. but now the clock is about 7 hour early.
Last edited by matyilona200 (2012-10-29 11:15:15)

[CUPS] Unable to set my new CUPS server with an HP printer (solved)

Hello,
I come from Gentoo and I just installed my new Arch Linux server on a notebook with 2 NIC ... Now, I'm trying to set the CUPS deamon to share printer (HP DESKJET 895Cxi) for 3 workstations in my LAN. Before, it was working (printer and linux ... has never been very good...). But now, I'm not able, and it's about 1 hour I'm looking for a stupid error that I don't know if it's important or not ...
(all is on my Wiki : http://pix-mania.dyndns.org/mediawiki/index.php/Cups)
Here are a list of installed package : cups ghostscript gsfonts hplip
The printer (USB) :
(lsusb)
Bus 002 Device 004: ID 03f0:0004 Hewlett-Packard DeskJet 895c
(dmesg)
usb 2-2: new full speed USB device using uhci_hcd and address 4
usblp0: Disabling reads from problematic bidirectional printer
usblp0: USB Unidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0004
Current configuration (only change made to original configuration) :
Listen <ip_serveur>:631
<Location />
Order allow,deny
Allow From all
</Location>
<Location /admin>
Order allow,deny
Allow From all
</Location>
<Location /admin/conf>
AuthType Default
Require user @SYSTEM
Order allow,deny
Allow From all
</Location>
When starting cups service, all is fine : I can use a workstation to browse the Web Interface ... but printer seems to be not detected since it tells "No printers." when clicking on "Printers" tab. So, I go to "Administration" tab and, under "Printers", I click the "Find New Printers" and again, it says : "No printers found.".
Not goot ... so, like I was doing with Gentoo, I click on "Add Printer" ... then, I receive a redirection to HTTPS ... click on the link (or wait) and nothing happend (timed out): web interface is broken for HTTPS ... I really got no idea why HTTPS is not working .
After that, when updating the configuration (with vim) and restarting the service, deamon won't stop and I have to send a "kill -9" to the cupsd pid ...
I look in log and I can just see this :
E [09/Jan/2011:18:19:55 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
I googled for one hour, but is not more working right now ...
Some questions :
- the printer is not detected? Is it because of the ACLs errors ?
- what the hell is "ACLs" for cups ? Never seen that before ...
So, right now, I got a working HTTP but not working HTTPS, with no printer available ... very useless
This printer is working "well" with cups, since it's an old model and it's a HP printer, so is "fully?" working on Linux ...
Any idea on what to do/try now ?
EDIT: after that message, I just refresh the page (I'm using Chromium) and ... magically, HTTPS was working (after accept untrusted certificate for HTTPS?) ... Then, go back to "Find New Printers" and now, it was working. Printer has been added ... Seems to be OK, but the "Print Self Test Page" doesn't work right now because of this :
Unsupported format 'application/vnd.cups-command'!
Current log file :
E [09/Jan/2011:18:19:55 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:24:48 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:29:08 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:36:28 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:36:42 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:41:06 +0100] Unknown SystemGroup "sys root lpadmin" on line 13, ignoring!
E [09/Jan/2011:18:41:06 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:42:24 +0100] Unknown SystemGroup "lpadmin" on line 14, ignoring!
E [09/Jan/2011:18:42:24 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:45:12 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:47:32 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:48:35 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:49:35 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:59:46 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:19:33:06 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:06 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:06 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:37 +0100] [CGI] Unable to create avahi client: No such file or directory
E [09/Jan/2011:19:33:37 +0100] [cups-deviced] PID 2744 (dnssd) stopped with status 1!
E [09/Jan/2011:19:33:37 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:34:09 +0100] [CGI] Unable to create avahi client: No such file or directory
E [09/Jan/2011:19:34:09 +0100] [cups-deviced] PID 2763 (dnssd) stopped with status 1!
E [09/Jan/2011:19:39:51 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:39:52 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
E [09/Jan/2011:19:41:23 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
E [09/Jan/2011:19:44:49 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:47:16 +0100] Returning IPP client-error-document-format-not-supported for Send-Document (ipp://localhost:631/printers/HP_DeskJet_895C_USB_ES89M230MKGO_HPLIP) from localhost
E [09/Jan/2011:19:49:36 +0100] Returning IPP client-error-document-format-not-supported for Send-Document (ipp://localhost:631/printers/HP_DeskJet_895C_USB_ES89M230MKGO_HPLIP) from localhost
EDIT2: tried to print "Print Test Page" instead of the above ... and got these errors :
(web interface)
"/usr/lib/cups/backend/hp failed"
(error_log)
E [09/Jan/2011:20:08:31 +0100] [CGI] Unable to create avahi client: No such file or directory
E [09/Jan/2011:20:08:31 +0100] [cups-deviced] PID 3126 (dnssd) stopped with status 1!
D [09/Jan/2011:20:09:16 +0100] [Job 5] perl: warning: Setting locale failed.
D [09/Jan/2011:20:09:16 +0100] [Job 5] prnt/backend/hp.c 559: dBus Connection Error (Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)!
D [09/Jan/2011:20:09:16 +0100] [Job 5] perl: warning: Please check that your locale settings:
D [09/Jan/2011:20:09:16 +0100] [Job 5] LANGUAGE = (unset),
D [09/Jan/2011:20:09:16 +0100] [Job 5] LC_ALL = (unset),
D [09/Jan/2011:20:09:16 +0100] [Job 5] LANG = "fr_FR.UTF-8"
D [09/Jan/2011:20:09:16 +0100] [Job 5] are supported and installed on your system.
D [09/Jan/2011:20:09:16 +0100] [Job 5] perl: warning: Falling back to the standard locale ("C").
D [09/Jan/2011:20:09:16 +0100] [Job 5] GhostScript extra search path ('GS_LIB'): /usr/share/cups/fonts
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'job-uuid=urn:uuid:e4395221-1209-32a9-5add-30f7945eaa6b'
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option job-uuid=urn:uuid:e4395221-1209-32a9-5add-30f7945eaa6b.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'job-originating-host-name=localhost'
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option job-originating-host-name=localhost.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'time-at-creation=1294600145'
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option time-at-creation=1294600145.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'time-at-processing=1294600145'
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option time-at-processing=1294600145.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'AP_D_InputSlot='
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option AP_D_InputSlot=.
D [09/Jan/2011:20:09:16 +0100] [Job 5] prnt/backend/hp.c 625: ERROR: 5021 device communication error!
D [09/Jan/2011:20:09:16 +0100] [Job 5] GPL Ghostscript 9.00: Unrecoverable error, exit code 1
D [09/Jan/2011:20:09:16 +0100] [Job 5] Process 3154 ending: "gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=5..."
D [09/Jan/2011:20:09:16 +0100] [Job 5] renderer return value: 1
D [09/Jan/2011:20:09:16 +0100] [Job 5] renderer received signal: 1
D [09/Jan/2011:20:09:16 +0100] [Job 5] Process dying with "Possible error on renderer command line or PostScript error. Check options.", exit stat: 3
D [09/Jan/2011:20:09:16 +0100] [Job 5] error: No such file or directory (2)
D [09/Jan/2011:20:09:16 +0100] [Job 5] Cleaning up ...
D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3153 (KID4) with signal 15
D [09/Jan/2011:20:09:16 +0100] [Job 5] KID3 exited with status 3
D [09/Jan/2011:20:09:16 +0100] [Job 5] Renderer exit stat: 3
D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3153 (KID4) with signal 9
D [09/Jan/2011:20:09:16 +0100] [Job 5]
D [09/Jan/2011:20:09:16 +0100] [Job 5] Closing foomatic-rip.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Renderer process finished
D [09/Jan/2011:20:09:16 +0100] [Job 5] Process dying with "Error closing renderer", exit stat: 3
D [09/Jan/2011:20:09:16 +0100] [Job 5] error: (0)
D [09/Jan/2011:20:09:16 +0100] [Job 5] Cleaning up ...
D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3152 (KID3) with signal 15
D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3152 (KID3) with signal 9
D [09/Jan/2011:20:09:16 +0100] [Job 5] Error closing renderer
D [09/Jan/2011:20:09:16 +0100] [Job 5]
D [09/Jan/2011:20:09:16 +0100] [Job 5] Closing foomatic-rip.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Backend returned status 4 (stop printer)
D [09/Jan/2011:20:09:16 +0100] [Job 5] Printer stopped due to backend errors; please consult the error_log file for details.
D [09/Jan/2011:20:09:16 +0100] [Job 5] End of messages
D [09/Jan/2011:20:09:16 +0100] [Job 5] printer-state=5(stopped)
D [09/Jan/2011:20:09:16 +0100] [Job 5] printer-state-message="/usr/lib/cups/backend/hp failed"
D [09/Jan/2011:20:09:16 +0100] [Job 5] printer-state-reasons=paused
E [09/Jan/2011:20:14:21 +0100] [Job 5] Stopping unresponsive job!
EDIT3: I tested the ppd from cups (and not hpijs) and got the same problem ... The latest idea was to unplug USB and plug to another USB ... and it seams to works ... Now, the test page print "fine" ...
So, I shared the printer over my LAN, and tried to print from a workstation ... it works fine now ... when looking error_log, I can see than there is no more Ghostscript error .
But I have a last question .. if somebody can answer ... When choosing a PPD file, I have the choice between 3 version :
- hpijs, 3.10.9
- hpijs, 3.10.9.11
- hpcups, 3.10.9
Don't know why onlyl the HPIJS got the ".11" and not any others ... I selected this one and here is what Cups say about the printer :
HP_DeskJet_895C_USB_ES29Z231JKGO_HPLIP HP DeskJet 895C Local Printer HP Deskjet 895c hpijs, 3.10.9.11 Idle - "ready to print"
I hope when upgrading the system, I will not get error from PPD file not found ... With my current PPD file, I get (really not sure) this error, but print is working so, it doesn't matter :
E [09/Jan/2011:21:08:04 +0100] [CGI] Unable to create avahi client: No such file or directory
E [09/Jan/2011:21:08:04 +0100] [cups-deviced] PID 5705 (dnssd) stopped with status 1!
E [09/Jan/2011:21:08:09 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
Thanks for all .. hope you don't think I'm crazy ^^
Last edited by loopx (2011-01-09 20:31:21)

WD and their lack of support for Mavericks:
A recent email from WD reads:
Dear WD Registered Customer,
UPDATE: November 1st, 2013
As a valued WD customer we want to make you aware of new reports of Western Digital and other external HDD products experiencing data loss when updating to Apple's OS X Mavericks (10.9). WD is urgently investigating these reports and the possible connection to the WD Drive Manager, WD Raid Manager and WD SmartWare software applications. Until the issue is understood and the cause identified, WD strongly urges our customers to uninstall these software applications before updating to OS X Mavericks (10.9), or delay upgrading. If you have already upgraded to Mavericks, WD recommends that you remove these applications and restart your computer. If you have already upgraded to Mavericks and are experiencing difficulty in accessing your external hard drive, please do not save anything to the drive, disconnect the drive from your computer, and contact Western Digital Customer Service at http://support.wd.com/country/ for further assistance.
The WD Drive Manager, WD Raid Manager, and WD SmartWare software applications are not new and have been available from WD for many years. However, solely as a precaution WD has removed these applications from our website as we investigate this issue.
Sincerely,
Western Digital
Which is basically Western Digital informing you that their out-of-date utilities don’t support Mavericks.
In any case those utilities are not the most effective. The moral of the story is: the first thing you should do after buying a WD drive is to format it as HFS Extended (Journaled) and not install ANY of their utilities but instead use reliable applications like CarbonCopyCloner or SuperDuper - or Time Machine.

[SOLVED] sudo: unable to set runas group vector: Invalid argument

I recently made the (idiotic) mistake of overwriting my /etc/passwd and /etc/group files, although I managed to restore them from a backup. Since restarting the machine I'm having the same issue every time I invoke sudo:
sudo: unable to set runas group vector: Invalid argument
I can't find any info on this error. Any ideas on where to start?
Thanks,
-- C. M.
EDIT: I should also note that this is a headless machine that I'm accessing via SSH.
Last edited by C. M. Harlequin (2014-06-15 10:35:33)

Thanks for the reply, Amish.
It's my understanding that the 'group vector' is a term that refers to the specific set of groups to which a user has membership, rather than a specific group named 'vector'. Although, I could be mistaken.
From the sudo manpage:
The -P (preserve group vector) option causes sudo to preserve the user's group vector unaltered. By default, sudo will initialize the group vector to the list of groups the target user is in. The real and effective group IDs, however, are still set to match the target user.
Similarly, from the sudoers manpage:
By default, sudo will initialize the group vector to the list of groups the target user is in. When preserve_groups is set, the user's existing group vector is left unaltered. The real and effective group IDs, however, are still set to match the target user. This flag is off by default.
But the manpages don't offer me much, I'm still clueless as to why I'm getting the error.
EDIT: although using the -P flag seems to allow sudo to run without error
Last edited by C. M. Harlequin (2014-06-14 18:42:39)

Power Policy Mananger unable to set global policy - error message

As my laptop hibernates after 30 minutes being unattended I would like to adjust the power settings. However I get a message saying "Power Policy Mananger unable to set global policy" - access is denied. Any ideas how I overcome this ?

hi found this on a forum hope it helps
I had a situation on machine where the administrator could not change
display settings, e.g., monitor blanking timeout period. After making
any changes and trying to save them a "Power Policy Manager unable to
set global policy" message box reported "Access is Denied".
I eventually solved this by exporting
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\Curr entVersion
\ControlsFolder\PowerCfg\GlobalPowerPolicy
from a working machine, and importing it into the problem machine.
If that fails log on to the computer by using an account that has Administrator privileges, or make a new user and give them administrator privileges and try again with the new user account
Message was edited by: bigmac

Illustrator won't run: "unable to set maximum number of files to be opened"

I have an intel macbook pro (core duo with 2GB ram) and a copy of purchased adobe creative suite 2. Other applications in the suite like photoshop, acrobat, etc can run on my mac without any problem. But when I try to run illustrator, it just shows an error message "Unable to set maximum number of files to be opened" and quits. I also installed a trial version of illustrator cs3 and got the same problem. Can anyone help? Thanks.
CC

Hi, I realize this is an old thread but it was unanswered and the issue has come up again in a newer thread:
http://forums.adobe.com/message/2534652
If the original poster sees this, can you reply tin the new thread and let us know if you were ever to solve this problem?
Thanks!

Boot camp no longer on startup disk bless tool unable to set boot disk

iOS 10.6.8 boot camp no longer on startup disk msg says 'bless tool unable to set boot disk'

solved my own problem. a simple restart did the trick.

Please Help, After Kernel panic restart failed- apple swirl(6 hrs), SafeMode-failed, SUMode-sucess. Could not unmount disk to erase. Repair permissions-multiple fail errors:unable to set permissions on... unable to set owner and group...

Please Help, I deleted an account that was the same name as the administrator but was not the administrator. Also a samsung galaxy s phone was charging through the usb port.
I closed out a program and got a message that the temp file could not be stored/saved.
Then a Kernel panic message occurred and restart was necessary.
The restart resulted in the screen with the apple logo and a continous swirl for 6+hrs,
Attempted Safe Mode start up, unsuccessful,
Single User Mode-sucess.
Ran $ fsck_hfs -rfd /dev/disk0s2 Ran several times repairs made with one which remained. something about a node.
No change in start up attempts
Started with install CD matching current OS 10.6
Ran Disk Utility Repair Permissions resulting in multiple errors:
One line/error
Warning: SUID file /////Ardagent has been modified and will not be repaired
144 lines/errors of this type of series of lines
Group permissions differ on...should be drwxr-xr-x, they are -rw-r--r-- .
permissions differ on...should be drwxr-xr-x, they are -rw-r--r-- .
unable to set owner and group...error 22: Invalid Argument
unable to set permissions on...error 22: Invalid Argument
Ran Repair Disk, result:
Error: Could not unmount disk (in red)
Ran Verify Disk, result:
The volume HD appears to be ok (in green)
Next I attempted to erase the dist to start from scratch since I have data backed up on time machine.
Error message box
Volume Erase failed
Volume Erase failed with error:
Could not unmount disk
I am looking to solve without buying DiskWarrior unless only resort.

So it looks like solved it for now I will update later. What I did was after starting from the install cd for the 10.6 system I ran from terminal ran:
diskutil disablejournaling /dev/disk0s2
diskutil disableownership /dev/disk0s2
diskutil repairPermissions /dev/disk0s2
then i closed terminal and then when to disk utility and chose to repair disk with results all was fine. Then ran repair permissions and got similar results from terminal function next I erased disk and then chose to restore from time machine and it is now restoring! yea!

Unable to set working directory (-2147024832) for some app installs

I've found several drivers on a Dell Laptop that don't play well with others in MDT 2012, so I started making an application install package for them instead. Most of them fail with an "unable to set working directory" error. I checked
the app install logs and they don't really make any sense to me. I know the process as a whole works, because I can install .Net 4.0 runtimes without any problems using the same method. The important bits of the ZTI App log are below. Would
be for any guidance on this, as I'm stumped and none of the searches on the exact errors are of much help.
A sample error returned in the wizard is:
WARNING - unable to set working directory (-2147024832)Error installing application Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00: The system cannot find the file specified.
The ZTIApplication.log file contains the following... the first is one that works (.NET 4), the second is one that fails. (Not using code block for this one, it doesn't like it).
<![LOG[Validating connection to \\ITSASERVER\DeploymentShare$\Applications\Microsoft .NET 4.0 runtime 4.0]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1"
thread="" file="ZTIApplications">
<![LOG[Already connected to server ITSASERVER as that is where this script is running from.]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[ Change directory: \\ITSASERVER\DeploymentShare$\Applications\Microsoft .NET 4.0 runtime 4.0]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications"
context="" type="1" thread="" file="ZTIApplications">
<![LOG[ Run Command: \\ITSASERVER\DeploymentShare$\Tools\X64\bddrun.exe dotNetFx40_Full_x86_x64.exe /norestart /passive]LOG]!><time="08:20:30.000+000" date="09-27-2013"
component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[ZTI installing application ]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Event 41031 sent: ZTI installing application ]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[About to run command: \\ITSASERVER\DeploymentShare$\Tools\X64\bddrun.exe dotNetFx40_Full_x86_x64.exe /norestart /passive]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications" context=""
type="1" thread="" file="ZTIApplications">
<![LOG[Command has been started (process ID 3212)]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[ZTI Heartbeat: command has been running for 0 minutes (process ID 3212)]LOG]!><time="08:20:31.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[Event 41003 sent: ZTI Heartbeat: command has been running for 0 minutes (process ID 3212)]LOG]!><time="08:20:31.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1"
thread="" file="ZTIApplications">
<![LOG[Return code from command = 0]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Application Microsoft .NET 4.0 runtime 4.0 installed successfully]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Event 41033 sent: Application Microsoft .NET 4.0 runtime 4.0 installed successfully]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[Property InstalledApplications001 is now = {9abb5842-9a8e-45c5-9268-4fa4e69dba34}]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[Application Microsoft .NET 4.0 runtime 4.0 needs a reboot, initiating.]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[Dependent application requested a reboot]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Property SMSTSRebootRequested is now = true]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Property SMSTSRetryRequested is now = true]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Exiting to initiate a reboot with retry (to pick up where we left off)]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[ZTIApplications processing completed successfully.]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Event 41001 sent: ZTIApplications processing completed successfully.]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[################]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Entry: {dee65f94-e269-4eac-927d-6e06c0e0eb9d}]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Name: Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[################]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Validating connection to \\ITSASERVER\DeploymentShare$\Applications\Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context=""
type="1" thread="" file="ZTIApplications">
<![LOG[Already connected to server ITSASERVER as that is where this script is running from.]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[ Change directory: \\ITSASERVER\DeploymentShare$\Applications\Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00]LOG]!><time="08:25:04.000+000" date="09-27-2013"
component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[WARNING - unable to set working directory: (-2147024832)]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="2" thread="" file="ZTIApplications">
<![LOG[ Run Command: \\ITSASERVER\DeploymentShare$\Tools\X64\bddrun.exe Setup.exe -s]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications"
context="" type="1" thread="" file="ZTIApplications">
<![LOG[ZTI installing application ]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Error executing web service http://ITSASERVER:9800/MDTMonitorEvent/PostEvent?uniqueID=2a0f4469-d803-4976-b434-adbf06b85c23&computerName=Lat3440_0927b&messageID=41031&severity=1&stepName=Install Applications&currentStep=61&totalSteps=88&id=4C4C4544-0031-4610-8053-B7C04F4C5731,E0:DB:55:AC:48:1C&message=ZTI
installing application &dartIP=&dartPort=&dartTicket=&vmHost=&vmName=: The server name or address could not be resolved
(-2147012889)]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Event 41031 sent: ZTI installing application ]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[About to run command: \\ITSASERVER\DeploymentShare$\Tools\X64\bddrun.exe Setup.exe -s]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[Error installing application Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00: The system cannot find the file specified.
]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="3" thread="" file="ZTIApplications">
<![LOG[Error executing web service http://ITSASERVER:9800/MDTMonitorEvent/PostEvent?uniqueID=2a0f4469-d803-4976-b434-adbf06b85c23&computerName=Lat3440_0927b&messageID=41032&severity=3&stepName=Install Applications&currentStep=61&totalSteps=88&id=4C4C4544-0031-4610-8053-B7C04F4C5731,E0:DB:55:AC:48:1C&message=Error
installing application Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00: The system cannot find the file specified.
&dartIP=&dartPort=&dartTicket=&vmHost=&vmName=: The server name or address could not be resolved
(-2147012889)]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Event 41032 sent: Error installing application Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00: The system cannot find the file specified.]
<![LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
Why can't it find it or set the working directory, especially when it's already validated that it's there?
--smthng

I'm not familiar with how Dell does their client side software, but for the server-side software (my area of expertise), I've always done something like the following:
I recommend running every application install in a VBScript/Powershell wrapper. You get logging for the application back on your SLShare as well as its cleaner (you can replace Drivers A05 with A06 by changing the script, rather than editing the application
in MDT).
sApplicationName = "Dell 12G Chipset"
oLogging.CreateEntry "Install-" & sApplicationName & ": Starting " & sApplicationName & " installation", LogTypeInfo
'//Set Destination Folder
sDestFolder = "c:\temp\"
'//Set Source Install Directory
sSourceDir = oUtility.ScriptDir
sSourceDir = sSourceDir & "\Source"
'//Check that folder exists, if not, create it.
oLogging.CreateEntry "Install-" & sApplicationName & ": Check that " & sDestFolder & " exists.", LogTypeInfo
if not oFSO.FolderExists (sDestFolder) then
oFSO.CreateFolder sDestFolder
End If
'//Copy folder from MDT share to C:\Temp
oLogging.CreateEntry "Install-" & sApplicationName & ": Copy from " & sSourceDir & " to " & sDestFolder, LogTypeInfo
oFSO.CopyFolder sSourceDir, sDestFolder
'//Sleep for 2 seconds to allow copy to finish
wscript.sleep 2000
sFile = sDestFolder & "Source\setup.exe"
'// Check if file/folder exists
If not oFSO.FileExists(sFile) then
oLogging.CreateEntry "Install-" & sApplicationName & ": " & sFile & " was not found, unable to install " & sApplicationName & "", LogTypeError
ZTIProcess = Failure
Exit Function
End if
'// Create log entry to show file being run
oLogging.CreateEntry "" & sFile & " -s", LogTypeInfo
iRetVal = oUtility.RunWithHeartbeat("" & sFile & " -s")
if (iRetVal = 0) or (iRetVal = 3010) then
ZTIProcess = Success
Else
ZTIProcess = Failure
End If
wscript.sleep 15000
'// Disable Zone Checks
oEnv("SEE_MASK_NOZONECHECKS") = 1
'//Folder Cleanup
oFSO.DeleteFolder sDestFolder & "Source"
I always copy any drivers that are installed after the fact (everything for me other than SAS/NIC drivers) to the C:\Temp as it can break. I always update my NIC drivers during the build to the latest Dell software using their packs. I try to
not mess with my boot image unless I'm adding a new model that is not supported by the built-in drivers.

Unable to set default program for .pdf

CURRENT PROBLEM:
As show in print screen, when i attempt to set default program nth happens at all. The only way i can open any .pdf file now is by 1st opening adobe reader 9 and select the .pdf file manually
INITIAL STAGE OF PROBLEM:
Problem started after upgrading to windows 7 from vista. Windows 7 is able to recognise adobe reader 8 as a valid default program since it is in windows.old. Thus the default for .pdf is adobe reader 8 (it was installed in vista).
Subsequently, installing adobe reader 9 isof no use as it will be ignored and windows 7 will only continue to use adobe reader 8 as the default reader when i try to open a .pdf file, unless if i manually opened adobe reader 9 and selected a .pdf file manaually
However, I am unable to uninstall adobe reader 8 as the "program and feature" can only identify adobe reader 9 and does not think that adobe reader 8 exists.
ATTEMPTs TO SOLVE:
Thus, I removed windows.old by using the disk cleanup. However, I am still unable to set adobe reader 9 as the default reader. Instead, .pdf are no longer accessible/"open-able" unless I 1st opened adobe reader 9 and then selected a .pdf manaually.
I've attempted reinstalling and restarting comps etc, they dun seem to help. I suspect the OS is now only able to recognise adobe reader 8 from windows.old as a valid program directory due to some registry issues since it was initally set as the default when i 1st upgraded the OS. Now that adobe reader 8 is removed, there might be some corrupted registry somewhere that needs to be set right again?
Really need help with this. Thanks a million.

Thanks guys for showing interest in helping.
As you guys can see, there's no adobe reader when u expand. Also, I already browsed the reader just in case too. Thus expanding doesnt help. =(
Also, I cant seem to find the "file type" tab in folder options

[Solved] Unable to set bluetooth stick on laptop

Similar Messages

Maybe you are looking for