[Solved]Unable to SSH to another PC
Until a couple of days ago, I logged into another box on the LAN using:
ssh <ip address>
Now, that command just reports:
ssh: connect to host <ip address> port 22: Connection timed out
The following also fails:
ssh <ip address> -l user
However, the following succeeds:
ssh user@<ip address>
Can anyone explain this change?
Last edited by Cotton (2011-11-23 19:35:25)
denstark wrote:we can take the other host out of the picture.
Cotton wrote:
However, the following succeeds:
ssh user@<ip address>
Similar Messages
-
Unable to SSH to Server with terminal, Putty Works (SOLVED)
Hi all,
I am unable to ssh to a remote server from the terminal, when I try with Putty it works, heres the output of ssh -v
OpenSSH_6.3, OpenSSL 1.0.1e 11 Feb 2013
debug1: Reading configuration data /root/.ssh/config
debug1: /root/.ssh/config line 49: Applying options for testing
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 20: Applying options for *
debug1: Connecting to ********* [*********] port 22.
debug1: Connection established.
debug1: permanently_set_uid: 0/0
debug1: identity file /root/.ssh/************.pem type -1
debug1: identity file /root/.ssh/************ type -1
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.3
debug1: Remote protocol version 2.0, remote software version OpenSSH_6.1
debug1: match: OpenSSH_6.1 pat OpenSSH*
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: server->client aes128-ctr hmac-md5 none
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Server host key: RSA 50:97:e6:ff:44:01:02:ca:e2:b4:38:41:86:42:2c:c2
debug1: Host '************' is known and matches the RSA host key.
debug1: Found key in /root/.ssh/known_hosts:4
debug1: ssh_rsa_verify: signature correct
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug1: SSH2_MSG_NEWKEYS received
debug1: Roaming not allowed by server
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug1: Authentications that can continue: publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /root/.ssh/************.pem
debug1: read PEM private key done: type RSA
debug1: Authentication succeeded (publickey).
Authenticated to ************ ([************]:22).
debug1: channel 0: new [client-session]
debug1: Requesting [email protected]
debug1: Entering interactive session.
debug1: Sending environment.
debug1: Sending env LANG = en_US.UTF-8
I suspect it has something to do with my terminal? I am using xfce terminal
Update:
so following advice from other forum members, I am marking this as solved. The situation resulted from me installing a new router and this router blocked SSH connections, I search on stackoverflow and tried this fix at
http://stackoverflow.com/questions/2247 … i-does-not
I applied the setting to /etc/ssh/ssh_config and it started working again.
Last edited by zenwong (2013-10-30 08:47:41)In addition to marking your thread as solved, you should also give a bit of info on how you came to that concolusion and what that confguration does. If you have the expectation that posting in these threads might yeild assistance, you should also assume that there is the expectation that you will have the courtesty to make the thread useful for others in the event that you find the solution on your own. https://wiki.archlinux.org/index.php/Fo … way_Street
-
Unable to ssh Opensuse 12.3 VM after restart
After successful provisioning of an OpenSuse 12.3 instance, I was able to ssh through putty. However, after restarting the VM through the management portal, I am unable to ssh to my server through putty. "Network Connection Timed out" error. Only
peculiar thing that I have noticed is that the hostname is blank in VM->Dashboard.
I am using the "SSH Details" value to ssh and not the Virtual IP address.Hi,
Thanks for your reply.
If the host name of the VM is lost, in general, it is impossible to connect to the VM.
If the issue persists after restart and you have no importance data in the temporary driver(D:) on the VM, maybe you can delete the VM and keep the attached disks, then recreate a new VM using that disk. (Please note that after recreating the VM, the data on the
D: of the previous VM would be lost)
In addition, if the above solution is not helpful, I recommend you to contact Azure support by submiting a support ticket to better analyze this issue and you won't be charged if this issue is caused by Azure.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Unable to SSH into both remote & VM machine server
Unable to SSH into both remote & VM machine server
Getting the message
"fork failed: Resource temporarily unavailable"
"ssh_exchange_identification: Connection closed by remote host"
"ssh_exchange_identification: Connection closed by remote host"
"ssh_exchange_identification: Connection closed by remote host"
Please help.These are the processes currently running: from top command.
These are the ulimit -a settings
This is the output of trying to ssh into local Ubuntu VM (I am able to login here via VirtualBox interface)
$ssh -v -v -v [email protected]
OpenSSH_6.2p2, OSSLShim 0.9.8r 8 Dec 2011
debug1: Reading configuration data /Users/spgen/.ssh/config
debug1: /Users/spgen/.ssh/config line 1: Applying options for *
debug1: Reading configuration data /etc/ssh_config
debug1: /etc/ssh_config line 20: Applying options for *
debug1: /etc/ssh_config line 102: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Executing proxy command: exec ssh 10.0.2.15 -W 192.168.1.11:22
debug1: permanently_drop_suid: 501
debug1: identity file /Users/spgen/.ssh/id_rsa type -1
debug1: identity file /Users/spgen/.ssh/id_rsa-cert type -1
debug1: identity file /Users/spgen/.ssh/id_dsa type -1
debug1: identity file /Users/spgen/.ssh/id_dsa-cert type -1
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.2
fork failed: Resource temporarily unavailable
ssh_exchange_identification: Connection closed by remote host
ssh_exchange_identification: Connection closed by remote host
ssh_exchange_identification: Connection closed by remote host
This is the output of trying to SSH into remote AWS server. ( I am able to login through web interface here)
$ssh -v -v -v -i /Users/spgen/pem-files/123.pem [email protected]
OpenSSH_6.2p2, OSSLShim 0.9.8r 8 Dec 2011
debug1: Reading configuration data /Users/spg/.ssh/config
debug1: /Users/spgen/.ssh/config line 1: Applying options for *
debug1: Reading configuration data /etc/ssh_config
debug1: /etc/ssh_config line 20: Applying options for *
debug1: /etc/ssh_config line 102: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Executing proxy command: exec ssh 10.0.2.15 -W 54.94.230.41:22
debug3: Incorrect RSA1 identifier
debug1: permanently_drop_suid: 501
debug3: Could not load "/Users/spgen/pem-files/123.pem" as a RSA1 public key
debug1: identity file /Users/spgen/pem-files/123.pem type -1
debug1: identity file /Users/spgen/pem-files/123.pem-cert type -1
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.2
fork failed: Resource temporarily unavailable
ssh_exchange_identification: Connection closed by remote host
ssh_exchange_identification: Connection closed by remote host
ssh_exchange_identification: Connection closed by remote host"
I guess the processes is not the issue, but maybe something to do with ssh config files.
As you rightly guessed 'fork failed' is happening on the local system. Would appreciate any pointers.
TIA. -
Unable to make SSH to another node in AIX for Oracle RAC Configuration
Hi,
After creating RSA Keys on both node when I try to scp authorized_keys file from one node to another, it give me the error of Connection lost and then connection closed by 'Machine Address'. SSH services are running on both node and I'm able to do ssh from root user but this happened with Oracle OS user account. This seems that sencond machine refuse to make connection. Kindly help me why is this happening.
I'm doing this on AIX 5.3. Your help will highly be appreciated.
Regards,
AbbasiSchavali, you are right this question is acutally has nothing to do with Oracle but the thing is that this issue arises during the configuration of RAC and we are unable to find the reason yet. I think there is problem with key genration however, I'll try to do this. by configuring sshd_config file and then will share the result.
Regards,
Abbasi -
[SOLVED] Unable to login to root unless it's through another account.
I'm fairly inexperienced with Linux and am having a frustrating problem.
I've forgotten my root password (oh boy) and am experiencing some weird problems attempting to reset it.
I have other accounts, which I can log in to, and they have sudo privileges. So I am not very restricted as to what I can actually do.
So I tried to use "passwd root" to change my root account password.
This allowed me to log in to root (at least I believe it is root) using "su" and the newly created password.
However, when I reboot and try to log in to root from the normal log in screen, it claims I'm using the wrong password.
I also tried logging in to root using "su" and then using "passwd" to change the root password. I got the same results as before.
I even tried removing the root password from the "etc/shadow" file, though I'm really not familiar with how that file works in archlinux.
I've searched around online, and stumbled across some similar topics in this forum, but all of them have worked around the problem by using a boot disc in some way.
I would really like to know what exactly is going on with my system here and why this password confusion is happening. If possible, I'd really really like to reset my root password remotely.
If this has been addressed before and I missed it, please link me to the old topic.
Thanks for reading guys. Any help is appreciated.
Last edited by bluekirby (2011-04-05 04:55:20)bluekirby wrote:If there were any location where I could deny people from logging in as root, where would that file be?
I'm really hoping it's just something I edited months ago and forgot about.
Take a look to this topic:
https://bbs.archlinux.org/viewtopic.php?id=67753
And try this to reset the password:
http://www.howtoforge.com/how-to-reset- … knoppix-p2
After that, only the users who knows(and are listed on /etc/sudoers) the root password will be able to do root jobs, like installing/removing packages or modify the filesystem.
Note that if you use sudo you can use visudo to edit /etc/sudoers command to prevent or allow users to do root jobs, example:
root ALL=(ALL) ALL
# %wheel ALL=(ALL) ALL
If you uncomment %wheel line all users in wheel group can do root jobs if they know the root password.
But you can leave commented %wheel line and add users manually, example(for "edward" and "christine" users):
root ALL=(ALL) ALL
# %wheel ALL=(ALL) ALL
edward ALL=(ALL) ALL
christine ALL=(ALL) ALL
By doing this,these two users(through sudo) and root will be allowed to do root jobs and nobody else
NOTE: Editing /etc/sudoers through visudo is hardly recommended, please dont edit the file manually with nano,vi,vim,etc. USE "visudo"
P.S. Reseting the password through a live distro is the most recommended way to reset the root password.
Last edited by AurosGamma (2011-04-05 04:31:34) -
[Solved] Unable to find root device
Hi guys,
it's been three days now that my laptop refuses to boot with a message from systemd like this:
ERROR: device 'UUID=xxx...' not found. Skipping fsck.
ERROR: Unable to find root device 'UUID=xxx...'.
You are being dropped to a recovery shell.
That said, keep in mind that I'm saying "three days" just because it's in the past two days that I've spent most of the time searching in the Internet for a solution of what seems just to be a well-known, very common problem, especially when it arises after a kernel upgrade (as in my case).
But believe me, I've been trying this and that through the live Arch Linux environment, but without the slightest improvement: regeneration of the initramfs, regeneration of /etc/fstab, reconfiguration of GRUB (although this was clearly unhelpful, since the problem arises when the kernel has already been booted), small changes in the hooks in /etc/mkinitcpio.conf, small changes to some modules loaded at boot, downgrading linux... Nothing works.
I'm now writing from another computer, so I cannot post the entire output of useful commands now, but if you need to know something I will give you the necessary information.
In the meanwhile, notice that I use Linux LVM partition with logical volumes formatted with Btrfs, without encryption.
It's strange that even with the dowgrade from Linux 3.18.3 (the one after whose installation the system was unusable) to 3.18.2 the problem still remains.
However, the only thing I managed to take from my system is the output of dmesg, obtained from the recovery shell, after having set the debug settings for systemd in the kernel command line before booting.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.18.4-1-ARCH (builduser@tobias) (gcc version 4.9.2 20141224 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jan 27 20:45:02 CET 2015
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=345f6168-2ff7-41fd-bf0e-050d4dd6795d systemd.log_level=debug systemd.log_target=kmsg log_buf_len=1M rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000913ff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000091400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c8c6cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c8c6d000-0x00000000dae8cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dae8d000-0x00000000daeb6fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000daeb7000-0x00000000db802fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000db803000-0x00000000dbafffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021edfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Dell Inc. Latitude E5550/0YM97J, BIOS A03 10/30/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x21ee00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
[ 0.000000] 1 base 0200000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 3 base 00DE000000 mask 7FFE000000 uncachable
[ 0.000000] 4 base 00DD000000 mask 7FFF000000 uncachable
[ 0.000000] 5 base 021F000000 mask 7FFF000000 uncachable
[ 0.000000] 6 base 021EE00000 mask 7FFFE00000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xc8c6d max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fda70-0x000fda7f] mapped at [ffff8800000fda70]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff88000008b000] 8b000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[ 0.000000] BRK [0x01b38000, 0x01b38fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21ec00000-0x21edfffff]
[ 0.000000] [mem 0x21ec00000-0x21edfffff] page 2M
[ 0.000000] BRK [0x01b39000, 0x01b39fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21ebfffff]
[ 0.000000] [mem 0x21c000000-0x21ebfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
[ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xc8c6cfff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xc8bfffff] page 2M
[ 0.000000] [mem 0xc8c00000-0xc8c6cfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
[ 0.000000] log_buf_len: 1048576 bytes
[ 0.000000] early log buf free: 519600(99%)
[ 0.000000] RAMDISK: [mem 0x3539c000-0x369c5fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000EF280 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x00000000DAE960A8 0000CC (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000DAEA9C60 00010C (v05 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000DAE96200 013A5B (v02 DELL CBX3 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x00000000DB800F80 000040
[ 0.000000] ACPI: APIC 0x00000000DAEA9D70 000084 (v03 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000DAEA9DF8 000044 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x00000000DAEA9E40 00009C (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000DAEA9EE0 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000DAEA9F20 000038 (v01 DELL CBX3 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DAEA9F58 0004B5 (v01 SataRe SataTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x00000000DAEAA410 000042 (v01 00000000 00000000)
[ 0.000000] ACPI: SSDT 0x00000000DAEAA458 000C7D (v02 Ther_R Ther_Rvp 00001000 INTL 20120913)
[ 0.000000] ACPI: ASF! 0x00000000DAEAB0D8 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: SSDT 0x00000000DAEAB178 00051F (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000DAEAB698 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000DAEAC210 0001C7 (v02 PmRef LakeTiny 00003000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000DAEAC3D8 0003A5 (v02 CppcTa CppcTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: PCCT 0x00000000DAEAC780 00006E (v05 PcctTa PcctTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000DAEAC7F0 000AC4 (v02 Cpc_Ta Cpc_Tabl 00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000DAEAD2B8 0041AC (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000DAEB1468 004508 (v01 DptfTa DptfTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: SLIC 0x00000000DAEB5970 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
[ 0.000000] ACPI: MSDM 0x00000000DAEB5AE8 000055 (v03 DELL CBX3 06222004 AMI 00010013)
[ 0.000000] ACPI: DMAR 0x00000000DAEB5B40 0000B0 (v01 INTEL BDW 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021edfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x21ecfa000-0x21ecfdfff]
[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880216800000-ffff88021e3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x21edfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00090fff]
[ 0.000000] node 0: [mem 0x00100000-0xc8c6cfff]
[ 0.000000] node 0: [mem 0x100000000-0x21edfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x21edfffff]
[ 0.000000] On node 0 totalpages: 1997309
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3984 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12786 pages used for memmap
[ 0.000000] DMA32 zone: 818285 pages, LIFO batch:31
[ 0.000000] Normal zone: 18360 pages used for memmap
[ 0.000000] Normal zone: 1175040 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xdd200000-0xdf1fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high dfl lint[0xe4])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl edge lint[0x35])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl edge lint[0x4b])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x59])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00091000-0x00091fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00092000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc8c6d000-0xdae8cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdae8d000-0xdaeb6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdaeb7000-0xdb802fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb803000-0xdbafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdbb00000-0xdcffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88021ea00000 s82880 r8192 d31808 u524288
[ 0.000000] pcpu-alloc: s82880 r8192 d31808 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1966078
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=345f6168-2ff7-41fd-bf0e-050d4dd6795d systemd.log_level=debug systemd.log_target=kmsg log_buf_len=1M rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7760140K/7989236K available (5479K kernel code, 908K rwdata, 1720K rodata, 1160K init, 1184K bss, 229096K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:728 0
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 32505856 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2593.984 MHz processor
[ 0.000025] Calibrating delay loop (skipped), value calculated using timer frequency.. 5190.13 BogoMIPS (lpj=8646613)
[ 0.000028] pid_max: default: 32768 minimum: 301
[ 0.000032] ACPI: Core revision 20140926
[ 0.020437] ACPI: All ACPI Tables successfully acquired
[ 0.021107] Security Framework initialized
[ 0.021114] Yama: becoming mindful.
[ 0.021531] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.023288] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.024091] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.024099] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.024297] Initializing cgroup subsys memory
[ 0.024302] Initializing cgroup subsys devices
[ 0.024304] Initializing cgroup subsys freezer
[ 0.024305] Initializing cgroup subsys net_cls
[ 0.024307] Initializing cgroup subsys blkio
[ 0.024325] CPU: Physical Processor ID: 0
[ 0.024326] CPU: Processor Core ID: 0
[ 0.024329] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.024329] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.025227] mce: CPU supports 7 MCE banks
[ 0.025238] CPU0: Thermal monitoring enabled (TM1)
[ 0.025247] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.025247] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.025334] Freeing SMP alternatives memory: 20K (ffffffff81a07000 - ffffffff81a0c000)
[ 0.026009] ftrace: allocating 20921 entries in 82 pages
[ 0.033432] dmar: Host address width 39
[ 0.033434] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.033442] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[ 0.033443] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.033447] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[ 0.033448] dmar: RMRR base: 0x000000db9ee000 end: 0x000000db9fcfff
[ 0.033449] dmar: RMRR base: 0x000000dd000000 end: 0x000000df1fffff
[ 0.033571] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.033572] HPET id 0 under DRHD base 0xfed91000
[ 0.033573] Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.033573] Your BIOS is broken and requested that x2apic be disabled.
[ 0.033573] This will slightly decrease performance.
[ 0.033573] Use 'intremap=no_x2apic_optout' to override BIOS request.
[ 0.033713] Enabled IRQ remapping in xapic mode
[ 0.033713] x2apic not enabled, IRQ remapping is in xapic mode
[ 0.034335] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.067359] smpboot: CPU0: Intel(R) Core(TM) i5-4310U CPU @ 2.00GHz (fam: 06, model: 45, stepping: 01)
[ 0.067366] TSC deadline timer enabled
[ 0.067387] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.067404] ... version: 3
[ 0.067405] ... bit width: 48
[ 0.067406] ... generic registers: 4
[ 0.067407] ... value mask: 0000ffffffffffff
[ 0.067407] ... max period: 0000ffffffffffff
[ 0.067408] ... fixed-purpose events: 3
[ 0.067409] ... event mask: 000000070000000f
[ 0.090846] x86: Booting SMP configuration:
[ 0.090848] .... node #0, CPUs: #1
[ 0.105028] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.111723] #2 #3
[ 0.146545] x86: Booted up 1 node, 4 CPUs
[ 0.146548] smpboot: Total of 4 processors activated (20760.53 BogoMIPS)
[ 0.149839] devtmpfs: initialized
[ 0.151742] PM: Registering ACPI NVS region [mem 0xdaeb7000-0xdb802fff] (9748480 bytes)
[ 0.152488] pinctrl core: initialized pinctrl subsystem
[ 0.152525] RTC time: 14:27:35, date: 01/29/15
[ 0.152613] NET: Registered protocol family 16
[ 0.163220] cpuidle: using governor ladder
[ 0.176565] cpuidle: using governor menu
[ 0.176604] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.176606] ACPI: bus type PCI registered
[ 0.176607] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.176682] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.176684] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.176776] PCI: Using configuration type 1 for base access
[ 0.176783] dmi type 0xB1 record - unknown flag
[ 0.190254] ACPI: Added _OSI(Module Device)
[ 0.190257] ACPI: Added _OSI(Processor Device)
[ 0.190258] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.190259] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.195406] ACPI: Executed 16 blocks of module-level executable AML code
[ 0.527048] ACPI: Dynamic OEM Table Load:
[ 0.527056] ACPI: SSDT 0xFFFF88021322C800 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.540534] ACPI: Dynamic OEM Table Load:
[ 0.540541] ACPI: SSDT 0xFFFF8802131E2000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
[ 0.553725] ACPI: Dynamic OEM Table Load:
[ 0.553731] ACPI: SSDT 0xFFFF8802131DD200 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
[ 0.607146] ACPI: Interpreter enabled
[ 0.607157] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
[ 0.607166] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
[ 0.607184] ACPI: (supports S0 S3 S4 S5)
[ 0.607185] ACPI: Using IOAPIC for interrupt routing
[ 0.607218] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.608649] ACPI: Power Resource [PG00] (on)
[ 0.620317] ACPI: Power Resource [PG01] (on)
[ 0.640702] ACPI: Power Resource [PG02] (on)
[ 1.401836] ACPI: Power Resource [FN00] (off)
[ 1.401913] ACPI: Power Resource [FN01] (off)
[ 1.401986] ACPI: Power Resource [FN02] (off)
[ 1.402057] ACPI: Power Resource [FN03] (off)
[ 1.402127] ACPI: Power Resource [FN04] (off)
[ 1.403037] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 1.403043] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 1.403622] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 1.404193] PCI host bridge to bus 0000:00
[ 1.404195] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 1.404196] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 1.404198] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 1.404199] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 1.404200] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff]
[ 1.404207] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 1.404286] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[ 1.404296] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 1.404301] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 1.404305] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 1.404376] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 1.404383] pci 0000:00:03.0: reg 0x10: [mem 0xf7e3c000-0xf7e3ffff 64bit]
[ 1.404461] pci 0000:00:04.0: [8086:0a03] type 00 class 0x118000
[ 1.404471] pci 0000:00:04.0: reg 0x10: [mem 0xf7e30000-0xf7e37fff 64bit]
[ 1.404565] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 1.404580] pci 0000:00:14.0: reg 0x10: [mem 0xf7e20000-0xf7e2ffff 64bit]
[ 1.404631] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 1.404674] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 1.404707] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 1.404725] pci 0000:00:16.0: reg 0x10: [mem 0xf7e46000-0xf7e4601f 64bit]
[ 1.404787] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.404856] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000
[ 1.404870] pci 0000:00:19.0: reg 0x10: [mem 0xf7e00000-0xf7e1ffff]
[ 1.404876] pci 0000:00:19.0: reg 0x14: [mem 0xf7e43000-0xf7e43fff]
[ 1.404882] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
[ 1.404937] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 1.445821] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 1.445873] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 1.445892] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e38000-0xf7e3bfff 64bit]
[ 1.445956] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.446016] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 1.446062] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[ 1.446146] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.446197] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 1.446246] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[ 1.446328] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 1.446379] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 1.446423] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
[ 1.446505] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.446555] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 1.446601] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 1.446621] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e42000-0xf7e423ff]
[ 1.446711] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.446770] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 1.446812] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 1.446999] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
[ 1.447014] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
[ 1.447021] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
[ 1.447027] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
[ 1.447034] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
[ 1.447041] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 1.447048] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e41000-0xf7e417ff]
[ 1.447087] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.447164] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 1.447177] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e40000-0xf7e400ff 64bit]
[ 1.447196] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 1.449196] pci 0000:01:00.0: [1217:8520] type 00 class 0x080501
[ 1.449218] pci 0000:01:00.0: reg 0x10: [mem 0xf7d01000-0xf7d01fff]
[ 1.449231] pci 0000:01:00.0: reg 0x14: [mem 0xf7d00000-0xf7d007ff]
[ 1.449369] pci 0000:01:00.0: PME# supported from D3hot D3cold
[ 1.449400] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 1.457648] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 1.457653] pci 0000:00:1c.0: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 1.458041] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000
[ 1.458129] pci 0000:02:00.0: reg 0x10: [mem 0xf7c00000-0xf7c01fff 64bit]
[ 1.458420] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 1.458511] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 1.462692] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 1.462697] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 1.462787] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 1.464747] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 1.547152] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 1.547202] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.547250] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.547296] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 1.547342] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 1.547388] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 1.547434] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[ 1.547480] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.613841] ACPI: Enabled 3 GPEs in block 00 to 7F
[ 1.613905] ACPI : EC: GPE = 0x27, I/O: command/status = 0x934, data = 0x930
[ 1.614013] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 1.614016] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.614019] vgaarb: loaded
[ 1.614020] vgaarb: bridge control possible 0000:00:02.0
[ 1.614099] PCI: Using ACPI for IRQ routing
[ 1.615308] PCI: pci_cache_line_size set to 64 bytes
[ 1.615344] e820: reserve RAM buffer [mem 0x00091400-0x0009ffff]
[ 1.615345] e820: reserve RAM buffer [mem 0xc8c6d000-0xcbffffff]
[ 1.615346] e820: reserve RAM buffer [mem 0x21ee00000-0x21fffffff]
[ 1.615428] NetLabel: Initializing
[ 1.615429] NetLabel: domain hash size = 128
[ 1.615429] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.615438] NetLabel: unlabeled traffic allowed by default
[ 1.615467] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.615471] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.617497] Switched to clocksource hpet
[ 1.621576] pnp: PnP ACPI init
[ 1.621752] system 00:00: [io 0x0680-0x069f] has been reserved
[ 1.621755] system 00:00: [io 0xffff] has been reserved
[ 1.621756] system 00:00: [io 0xffff] has been reserved
[ 1.621758] system 00:00: [io 0xffff] has been reserved
[ 1.621759] system 00:00: [io 0x1800-0x18fe] could not be reserved
[ 1.621761] system 00:00: [io 0x164e-0x164f] has been reserved
[ 1.621763] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.621806] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.621837] system 00:02: [io 0x1854-0x1857] has been reserved
[ 1.621839] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 1.621908] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.621927] pnp 00:04: Plug and Play ACPI device, IDs DLL062c PNP0f13 (active)
[ 1.774372] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (disabled)
[ 1.774526] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.774529] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.774530] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.774532] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.774534] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[ 1.774536] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.774538] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 1.774539] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.774541] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 1.774543] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.774545] system 00:06: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 1.774547] system 00:06: [mem 0xf7ff0000-0xf7ffffff] has been reserved
[ 1.774549] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.774927] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.001167] pnp: PnP ACPI: found 8 devices
[ 2.007535] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 2.007540] pci 0000:00:1c.0: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 2.007546] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 2.007549] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 2.007555] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 2.007564] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 2.007566] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 2.007567] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 2.007568] pci_bus 0000:00: resource 7 [mem 0xdf200000-0xfeafffff]
[ 2.007570] pci_bus 0000:01: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 2.007571] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 2.007594] NET: Registered protocol family 2
[ 2.007754] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 2.007894] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 2.008082] TCP: Hash tables configured (established 65536 bind 65536)
[ 2.008100] TCP: reno registered
[ 2.008108] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 2.008140] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 2.008195] NET: Registered protocol family 1
[ 2.008208] pci 0000:00:02.0: Video device with shadowed ROM
[ 2.024532] PCI: CLS 64 bytes, default 64
[ 2.024577] Unpacking initramfs...
[ 2.341540] Freeing initrd memory: 22696K (ffff88003539c000 - ffff8800369c6000)
[ 2.341564] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 2.341567] software IO TLB [mem 0xc4c6d000-0xc8c6d000] (64MB) mapped at [ffff8800c4c6d000-ffff8800c8c6cfff]
[ 2.341712] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 2.341757] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
[ 2.341762] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
[ 2.341766] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
[ 2.341771] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
[ 2.341822] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 2.341843] Scanning for low memory corruption every 60 seconds
[ 2.342043] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 2.342061] Initialise system trusted keyring
[ 2.342314] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.343277] zpool: loaded
[ 2.343280] zbud: loaded
[ 2.343434] VFS: Disk quotas dquot_6.5.2
[ 2.343457] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.343557] msgmni has been set to 15200
[ 2.343599] Key type big_key registered
[ 2.343749] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.343779] io scheduler noop registered
[ 2.343781] io scheduler deadline registered
[ 2.343802] io scheduler cfq registered (default)
[ 2.343967] pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X
[ 2.344096] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 2.344214] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
[ 2.344282] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 2.344283] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 2.344286] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 2.344296] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 2.344297] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 2.344300] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 2.344310] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 2.344312] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 2.344325] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.344337] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.344362] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 2.344363] vesafb: scrolling: redraw
[ 2.344364] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 2.344382] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004f80000, using 8128k, total 8128k
[ 2.492136] Console: switching to colour frame buffer device 240x67
[ 2.639261] fb0: VESA VGA frame buffer device
[ 2.639278] intel_idle: MWAIT substates: 0x11142120
[ 2.639279] intel_idle: v0.4 model 0x45
[ 2.639280] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.639471] GHES: HEST is not enabled!
[ 2.639520] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 2.639854] Linux agpgart interface v0.103
[ 2.639890] rtc_cmos 00:01: RTC can wake from S4
[ 2.640003] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 2.640027] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.640037] Intel P-state driver initializing.
[ 2.640149] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.640415] TCP: cubic registered
[ 2.640635] NET: Registered protocol family 10
[ 2.641104] NET: Registered protocol family 17
[ 2.641809] Loading compiled-in X.509 certificates
[ 2.641841] registered taskstats version 1
[ 2.642839] Magic number: 15:558:486
[ 2.642991] rtc_cmos 00:01: setting system clock to 2015-01-29 14:27:38 UTC (1422541658)
[ 2.643157] PM: Hibernation image not present or could not be loaded.
[ 2.645133] Freeing unused kernel memory: 1160K (ffffffff818e5000 - ffffffff81a07000)
[ 2.645137] Write protecting the kernel read-only data: 8192k
[ 2.649298] Freeing unused kernel memory: 652K (ffff88000155d000 - ffff880001600000)
[ 2.651088] Freeing unused kernel memory: 328K (ffff8800017ae000 - ffff880001800000)
[ 2.656604] random: systemd-tmpfile urandom read with 6 bits of entropy available
[ 2.656683] systemd-tmpfiles[60]: /dev/mapper created successfully.
[ 2.656691] systemd-tmpfiles[60]: /dev/fuse created successfully.
[ 2.656696] systemd-tmpfiles[60]: /dev/mapper/control created successfully.
[ 2.656700] systemd-tmpfiles[60]: /dev/loop-control created successfully.
[ 2.656704] systemd-tmpfiles[60]: /dev/cuse created successfully.
[ 2.656707] systemd-tmpfiles[60]: /dev/btrfs-control created successfully.
[ 2.657455] systemd-udevd[61]: starting version 218
[ 2.657462] systemd-udevd[61]: hwdb.bin does not exist, please run udevadm hwdb --update
[ 2.657510] systemd-udevd[61]: Load module index
[ 2.657562] systemd-udevd[61]: Created link configuration context.
[ 2.657568] systemd-udevd[61]: timestamp of '/usr/lib/udev/rules.d' changed
[ 2.657608] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/10-dm.rules
[ 2.657685] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/11-dm-initramfs.rules
[ 2.657695] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/11-dm-lvm.rules
[ 2.657733] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/13-dm-disk.rules
[ 2.657763] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/50-udev-default.rules
[ 2.657871] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/60-persistent-storage.rules
[ 2.657981] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/64-btrfs.rules
[ 2.657999] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/69-dm-lvm-metad.rules
[ 2.658057] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/80-drivers.rules
[ 2.658080] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/95-dm-notify.rules
[ 2.658089] systemd-udevd[61]: rules contain 24576 bytes tokens (2048 * 12 bytes), 4834 bytes strings
[ 2.658091] systemd-udevd[61]: 641 strings (8077 bytes), 378 de-duplicated (3507 bytes), 264 trie nodes used
[ 2.658106] systemd-udevd[61]: chmod '/dev/fuse' 0666
[ 2.658188] systemd-udevd[61]: Unload module index
[ 2.658212] systemd-udevd[61]: Unloaded link configuration context.
[ 2.658262] systemd-udevd[62]: set children_max to 16
[ 2.660408] systemd-udevd[62]: seq 678 queued, 'add' 'module'
[ 2.660490] systemd-udevd[62]: seq 678 forked new worker [67]
[ 2.660575] systemd-udevd[67]: seq 678 running
[ 2.660618] systemd-udevd[67]: no db file to read /run/udev/data/+module:raid6_pq: No such file or directory
[ 2.660644] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 2.660651] systemd-udevd[67]: seq 678 processed with 0
[ 2.714860] raid6: sse2x1 9342 MB/s
[ 2.771561] raid6: sse2x2 11848 MB/s
[ 2.828260] raid6: sse2x4 13887 MB/s
[ 2.884943] raid6: avx2x1 18356 MB/s
[ 2.941655] raid6: avx2x2 21230 MB/s
[ 2.998344] raid6: avx2x4 24583 MB/s
[ 2.998345] raid6: using algorithm avx2x4 (24583 MB/s)
[ 2.998346] raid6: using avx2x2 recovery algorithm
[ 2.998547] xor: automatically using best checksumming function:
[ 2.998570] systemd-udevd[62]: seq 679 queued, 'add' 'module'
[ 2.998603] systemd-udevd[62]: passed 124 bytes to netlink monitor 0x7f4fb497f0d0
[ 2.998639] systemd-udevd[67]: seq 679 running
[ 2.998659] systemd-udevd[67]: no db file to read /run/udev/data/+module:xor: No such file or directory
[ 2.998678] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 2.998684] systemd-udevd[67]: seq 679 processed with 0
[ 3.031698] avx : 25444.800 MB/sec
[ 3.034144] systemd-udevd[62]: Validate module index
[ 3.034177] systemd-udevd[62]: Check if link configuration needs reloading.
[ 3.034204] systemd-udevd[62]: seq 680 queued, 'add' 'module'
[ 3.034228] systemd-udevd[62]: passed 126 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.034249] systemd-udevd[67]: seq 680 running
[ 3.034275] systemd-udevd[67]: no db file to read /run/udev/data/+module:btrfs: No such file or directory
[ 3.034299] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 3.034308] systemd-udevd[67]: seq 680 processed with 0
[ 3.034899] systemd-udevd[62]: seq 681 queued, 'add' 'module'
[ 3.034927] systemd-udevd[62]: passed 133 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.034945] systemd-udevd[67]: seq 681 running
[ 3.034964] systemd-udevd[67]: no db file to read /run/udev/data/+module:crc32c_intel: No such file or directory
[ 3.034979] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 3.034986] systemd-udevd[67]: seq 681 processed with 0
[ 3.035051] systemd-udevd[62]: seq 682 queued, 'add' 'module'
[ 3.035070] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.035087] systemd-udevd[67]: seq 682 running
[ 3.035101] systemd-udevd[67]: no db file to read /run/udev/data/+module:crc32c_generic: No such file or directory
[ 3.035113] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 3.035118] systemd-udevd[67]: seq 682 processed with 0
[ 3.035756] systemd-udevd[62]: seq 683 queued, 'add' 'slab'
[ 3.035776] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.035790] systemd-udevd[67]: seq 683 running
[ 3.035795] systemd-udevd[62]: seq 684 queued, 'add' 'slab'
[ 3.035810] systemd-udevd[67]: no db file to read /run/udev/data/+slab:btrfs_inode: No such file or directory
[ 3.035830] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 3.035834] systemd-udevd[67]: seq 683 processed with 0
[ 3.035903] systemd-udevd[62]: seq 684 forked new worker [75]
[ 3.035934] systemd-udevd[62]: seq 685 queued, 'add' 'slab'
[ 3.035948] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.035961] systemd-udevd[67]: seq 685 running
[ 3.035968] systemd-udevd[62]: seq 686 queued, 'add' 'slab'
[ 3.035981] systemd-udevd[67]: no db file to read /run/udev/data/+slab::at-0000144: No such file or directory
[ 3.035981] systemd-udevd[75]: seq 684 running
[ 3.035999] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 3.036004] systemd-udevd[67]: seq 685 processed with 0
[ 3.036010] systemd-udevd[75]: no db file to read /run/udev/data/+slab::at-0000176: No such file or directory
[ 3.036027] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
[ 3.036031] systemd-udevd[75]: seq 684 processed with 0
[ 3.036065] systemd-udevd[62]: seq 686 forked new worker [76]
[ 3.036107] systemd-udevd[62]: seq 687 queued, 'add' 'slab'
[ 3.036128] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.036146] systemd-udevd[62]: seq 688 queued, 'add' 'slab'
[ 3.036165] systemd-udevd[76]: seq 686 running
[ 3.036166] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.036180] systemd-udevd[75]: seq 688 running
[ 3.036182] systemd-udevd[62]: seq 689 queued, 'add' 'slab'
[ 3.036199] systemd-udevd[75]: no db file to read /run/udev/data/+slab::at-0000088: No such file or directory
[ 3.036206] systemd-udevd[76]: no db file to read /run/udev/data/+slab::at-0000064: No such file or directory
[ 3.036212] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
[ 3.036215] systemd-udevd[75]: seq 688 processed with 0
[ 3.036227] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
[ 3.036231] systemd-udevd[76]: seq 686 processed with 0
[ 3.036257] Btrfs loaded
[ 3.036289] systemd-udevd[62]: seq 689 forked new worker [77]
[ 3.036329] systemd-udevd[62]: seq 690 queued, 'add' 'slab'
[ 3.036351] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.036370] systemd-udevd[62]: seq 691 queued, 'add' 'slab'
[ 3.036378] systemd-udevd[77]: seq 689 running
[ 3.036390] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.036407] systemd-udevd[62]: seq 692 queued, 'add' 'slab'
[ 3.036413] systemd-udevd[77]: no db file to read /run/udev/data/+slab::at-0000280: No such file or directory
[ 3.036434] systemd-udevd[77]: passed -1 bytes to netlink monitor 0x7f4fb498a250
[ 3.036439] systemd-udevd[77]: seq 689 processed with 0
[ 3.036457] systemd-udevd[76]: seq 691 running
[ 3.036474] systemd-udevd[76]: no db file to read /run/udev/data/+slab::at-0000304: No such file or directory
[ 3.036493] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
[ 3.036498] systemd-udevd[76]: seq 691 processed with 0
[ 3.036513] systemd-udevd[62]: seq 692 forked new worker [78]
[ 3.036548] systemd-udevd[62]: seq 693 queued, 'add' 'slab'
[ 3.036563] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.036576] systemd-udevd[76]: seq 693 running
[ 3.036579] systemd-udevd[62]: seq 694 queued, 'add' 'slab'
[ 3.036596] systemd-udevd[76]: no db file to read /run/udev/data/+slab::at-0000096: No such file or directory
[ 3.036597] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.036615] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
[ 3.036616] systemd-udevd[62]: seq 695 queued, 'add' 'slab'
[ 3.036619] systemd-udevd[76]: seq 693 processed with 0
[ 3.036637] systemd-udevd[77]: seq 694 running
[ 3.036649] systemd-udevd[78]: seq 692 running
[ 3.036655] systemd-udevd[77]: no db file to read /run/udev/data/+slab::at-0000040: No such file or directory
[ 3.036672] systemd-udevd[77]: passed -1 bytes to netlink monitor 0x7f4fb498a250
[ 3.036676] systemd-udevd[77]: seq 694 processed with 0
[ 3.036678] systemd-udevd[78]: no db file to read /run/udev/data/+slab::at-0000160: No such file or directory
[ 3.036694] systemd-udevd[78]: passed -1 bytes to netlink monitor 0x7f4fb498f600
[ 3.036698] systemd-udevd[78]: seq 692 processed with 0
[ 3.036721] systemd-udevd[62]: seq 695 forked new worker [80]
[ 3.036773] systemd-udevd[62]: seq 696 queued, 'add' 'misc'
[ 3.036801] systemd-udevd[80]: seq 695 running
[ 3.036826] systemd-udevd[80]: no db file to read /run/udev/data/+slab::at-0000080: No such file or directory
[ 3.036832] systemd-udevd[62]: passed 192 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.036843] systemd-udevd[80]: passed -1 bytes to netlink monitor 0x7f4fb49913d0
[ 3.036848] systemd-udevd[80]: seq 695 processed with 0
[ 3.036859] systemd-udevd[76]: seq 696 running
[ 3.036904] systemd-udevd[76]: no db file to read /run/udev/data/c10:234: No such file or directory
[ 3.036916] systemd-udevd[76]: handling device node '/dev/btrfs-control', devnum=c10:234, mode=0600, uid=0, gid=0
[ 3.036922] systemd-udevd[76]: preserve permissions /dev/btrfs-control, 020600, uid=0, gid=0
[ 3.036930] systemd-udevd[76]: creating symlink '/dev/char/10:234' to '../btrfs-control'
[ 3.036959] systemd-udevd[76]: created empty file '/run/udev/data/c10:234' for '/devices/virtual/misc/btrfs-control'
[ 3.036987] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
[ 3.036992] systemd-udevd[76]: seq 696 processed with 0
[ 3.037009] systemd-udevd[67]: seq 687 running
[ 3.037027] systemd-udevd[67]: no db file to read /run/udev/data/+slab::at-0000152: No such file or directory
[ 3.037044] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 3.037048] systemd-udevd[67]: seq 687 processed with 0
[ 3.037063] systemd-udevd[75]: seq 690 running
[ 3.037079] systemd-udevd[75]: no db file to read /run/udev/data/+slab::at-0000424: No such file or directory
[ 3.037093] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
[ 3.037097] systemd-udevd[75]: seq 690 processed with 0
[ 3.037372] udevadm[79]: calling: trigger
[ 3.037397] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/vt'
[ 3.037403] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/xor'
[ 3.037408] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/8250'
[ 3.037412] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/tcp_cubic'
[ 3.037417] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/acpi'
[ 3.037421] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/ipv6'
[ 3.037425] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/cpuidle'
[ 3.037428] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/rcutree'
[ 3.037432] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/block'
[ 3.037436] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/btrfs'
[ 3.037440] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/sysrq'
[ 3.037444] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/zswap'
[ 3.037448] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/crc32c_generic'
[ 3.037453] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/firmware_class'
[ 3.037457] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/workqueue'
[ 3.037461] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/crc32c_intel'
[ 3.037465] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/spurious'
[ 3.037469] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/raid6_pq'
[ 3.037473] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/configfs'
[ 3.037477] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/netpoll'
[ 3.037481] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/pci_slot'
[ 3.037486] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/kernel'
[ 3.037490] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/acpiphp'
[ 3.037494] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/pciehp'
[ 3.037498] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/printk'
[ 3.037502] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/pstore'
[ 3.037507] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/dynamic_debug'
[ 3.037511] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/xz_dec'
[ 3.037515] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/pcie_aspm'
[ 3.037522] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/rcupdate'
[ 3.037526] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/intel_idle'
[ 3.037530] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/keyboard'
[ 3.037534] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/pci_hotplug'
[ 3.037548] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/cpu'
[ 3.037552] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci'
[ 3.037556] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pnp'
[ 3.037559] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/spi'
[ 3.037563] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/xen'
[ 3.037567] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/acpi'
[ 3.037571] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/node'
[ 3.037575] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/clocksource'
[ 3.037579] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/machinecheck'
[ 3.037583] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/event_source'
[ 3.037587] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/workqueue'
[ 3.037591] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/container'
[ 3.037595] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/memory'
[ 3.037599] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci_express'
[ 3.037603] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform'
[ 3.037607] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/clockevents'
[ 3.037611] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/xen-backend'
[ 3.037628] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci/drivers/xen-platform-pci'
[ 3.037633] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci/drivers/pcieport'
[ 3.037638] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci/drivers/ioapic'
[ 3.037642] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci/drivers/serial'
[ 3.037653] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pnp/drivers/rtc_cmos'
[ 3.037658] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pnp/drivers/serial'
[ 3.037662] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pnp/drivers/system'
[ 3.037675] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/acpi/drivers/ec'
[ 3.037680] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/acpi/drivers/hpet'
[ 3.037685] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/acpi/drivers/intel_smart_connect'
[ 3.037691] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/acpi/drivers/hardware_error_device'
[ 3.037716] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci_express/drivers/aer'
[ 3.037721] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci_express/drivers/pcie_pme'
[ 3.037726] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci_express/drivers/pciehp'
[ 3.037735] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/alarmtimer'
[ 3.037739] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/efi-framebuffer'
[ 3.037744] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/vesa-framebuffer'
[ 3.037748] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/serial8250'
[ 3.037753] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/syscon'
[ 3.037760] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/clk-lpt'
[ 3.037842] systemd-udevd[62]: seq 697 queued, 'add' 'bus'
[ 3.037860] systemd-udevd[62]: passed 119 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.037890] systemd-udevd[67]: seq 697 running
[ 3.037891] systemd-udevd[62]: seq 698 queued, 'add' 'drivers'
[ 3.037906] systemd-udevd[62]: seq 699 queued, 'add' 'drivers'
[ 3.037909] systemd-udevd[67]: no db file to read /run/udev/data/+bus:acpi: No such file or directory
[ 3.037921] systemd-udevd[62]: seq 700 queued, 'add' 'drivers'
[ 3.037923] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 3.037925] systemd-udevd[67]: seq 697 processed with 0
[ 3.037941] systemd-udevd[62]: seq 701 queued, 'add' 'drivers'
[ 3.037963] systemd-udevd[62]: passed 134 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.037985] systemd-udevd[62]: passed 153 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.037988] systemd-udevd[67]: seq 698 running
[ 3.037999] systemd-udevd[62]: passed 136 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038001] systemd-udevd[67]: no db file to read /run/udev/data/+drivers:ec: No such file or directory
[ 3.038011] systemd-udevd[62]: passed 151 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038013] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 3.038015] systemd-udevd[67]: seq 698 processed with 0
[ 3.038031] systemd-udevd[62]: seq 702 queued, 'add' 'bus'
[ 3.038053] systemd-udevd[62]: passed 126 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038076] systemd-udevd[67]: seq 702 running
[ 3.038079] systemd-udevd[62]: seq 703 queued, 'add' 'bus'
[ 3.038088] systemd-udevd[67]: no db file to read /run/udev/data/+bus:clockevents: No such file or directory
[ 3.038094] systemd-udevd[62]: passed 126 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038102] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 3.038106] systemd-udevd[67]: seq 702 processed with 0
[ 3.038111] systemd-udevd[62]: seq 704 queued, 'add' 'bus'
[ 3.038113] systemd-udevd[78]: seq 703 running
[ 3.038126] systemd-udevd[62]: passed 124 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038134] systemd-udevd[78]: no db file to read /run/udev/data/+bus:clocksource: No such file or directory
[ 3.038143] systemd-udevd[80]: seq 704 running
[ 3.038145] systemd-udevd[62]: seq 705 queued, 'add' 'bus'
[ 3.038152] systemd-udevd[78]: passed -1 bytes to netlink monitor 0x7f4fb498f600
[ 3.038156] systemd-udevd[62]: passed 118 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038158] systemd-udevd[78]: seq 703 processed with 0
[ 3.038163] systemd-udevd[80]: no db file to read /run/udev/data/+bus:container: No such file or directory
[ 3.038175] systemd-udevd[62]: seq 706 queued, 'add' 'bus'
[ 3.038177] systemd-udevd[80]: passed -1 bytes to netlink monitor 0x7f4fb49913d0
[ 3.038179] systemd-udevd[80]: seq 704 processed with 0
[ 3.038188] systemd-udevd[62]: passed 127 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038192] systemd-udevd[67]: seq 705 running
[ 3.038201] systemd-udevd[78]: seq 706 running
[ 3.038206] systemd-udevd[62]: seq 707 queued, 'add' 'bus'
[ 3.038209] systemd-udevd[67]: no db file to read /run/udev/data/+bus:cpu: No such file or directory
[ 3.038218] systemd-udevd[62]: passed 127 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038224] systemd-udevd[78]: no db file to read /run/udev/data/+bus:event_source: No such file or directory
[ 3.038225] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 3.038228] systemd-udevd[67]: seq 705 processed with 0
[ 3.038234] systemd-udevd[62]: seq 708 queued, 'add' 'bus'
[ 3.038243] systemd-udevd[80]: seq 707 running
[ 3.038243] systemd-udevd[78]: passed -1 bytes to netlink monitor 0x7f4fb498f600
[ 3.038246] systemd-udevd[78]: seq 706 processed with 0
[ 3.038254] systemd-udevd[76]: seq 700 running
[ 3.038261] systemd-udevd[80]: no db file to read /run/udev/data/+bus:machinecheck: No such file or directory
[ 3.038272] systemd-udevd[80]: passed -1 bytes to netlink monitor 0x7f4fb49913d0
[ 3.038275] systemd-udevd[80]: seq 707 processed with 0
[ 3.038276] systemd-udevd[76]: no db file to read /run/udev/data/+drivers:hpet: No such file or directory
[ 3.038306] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
[ 3.038310] systemd-udevd[76]: seq 700 processed with 0
[ 3.038325] systemd-udevd[75]: seq 699 running
[ 3.038343] systemd-udevd[75]: no db file to read /run/udev/data/+drivers:hardware_error_device: No such file or directory
[ 3.038360] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
[ 3.038364] systemd-udevd[75]: seq 699 processed with 0
[ 3.038405] systemd-udevd[77]: seq 701 running
[ 3.038419] systemd-udevd[77]: no db file to read /run/udev/data/+drivers:intel_smart_connect: No such file or directory
[ 3.038429] systemd-udevd[77]: passed -1 bytes to netlink monitor 0x7f4fb498a250
[ 3.038432] systemd-udevd[77]: seq 701 processed with 0
[ 3.038531] systemd-udevd[62]: seq 708 forked new worker [81]
[ 3.038591] systemd-udevd[62]: seq 709 queued, 'add' 'bus'
[ 3.038612] systemd-udevd[62]: passed 119 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038623] systemd-udevd[81]: seq 708 running
[ 3.038627] systemd-udevd[67]: seq 709 running
[ 3.038631] systemd-udevd[62]: seq 710 queued, 'add' 'bus'
[ 3.038640] systemd-udevd[62]: passed 118 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038648] systemd-udevd[67]: no db file to read /run/udev/data/+bus:node: No such file or directory
[ 3.038653] systemd-udevd[75]: seq 710 running
[ 3.038655] systemd-udevd[81]: no db file to read /run/udev/data/+bus:memory: No such file or directory
[ 3.038657] systemd-udevd[62]: seq 711 queued, 'add' 'drivers'
[ 3.038666] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 3.038671] systemd-udevd[62]: seq 712 queued, 'add' 'drivers'
[ 3.038671] systemd-udevd[67]: seq 709 processed with 0
[ 3.038676] systemd-udevd[81]: passed -1 bytes to netlink monitor 0x7f4fb49945b0
[ 3.038678] systemd-udevd[75]: no db file to read /run/udev/data/+bus:pci: No such file or directory
[ 3.038682] systemd-udevd[81]: seq 708 processed with 0
[ 3.038693] systemd-udevd[62]: seq 713 queued, 'add' 'drivers'
[ 3.038695] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
[ 3.038700] systemd-udevd[75]: seq 710 processed with 0
[ 3.038710] systemd-udevd[62]: seq 714 queued, 'add' 'drivers'
[ 3.038721] systemd-udevd[62]: passed 137 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038732] systemd-udevd[62]: passed 139 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038734] systemd-udevd[67]: seq 711 running
[ 3.038753] systemd-udevd[76]: seq 713 running
[ 3.038753] systemd-udevd[67]: no db file to read /run/udev/data/+drivers:ioapic: No such file or directory
[ 3.038779] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 3.038782] systemd-udevd[76]: no db file to read /run/udev/data/+drivers:serial: No such file or directory
[ 3.038784] systemd-udevd[67]: seq 711 processed with 0
[ 3.038797] systemd-udevd[75]: seq 712 running
[ 3.038799] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
[ 3.038803] systemd-udevd[76]: seq 713 processed with 0
[ 3.038810] systemd-udevd[62]: passed 137 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038815] systemd-udevd[75]: no db file to read /run/udev/data/+drivers:pcieport: No such file or directory
[ 3.038823] systemd-udevd[62]: passed 147 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038841] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
[ 3.038845] systemd-udevd[75]: seq 712 processed with 0
[ 3.038849] systemd-udevd[77]: seq 714 running
[ 3.038856] systemd-udevd[62]: seq 715 queued, 'add' 'bus'
[ 3.038864] systemd-udevd[77]: no db file to read /run/udev/data/+drivers:xen-platform-pci: No such file or directory
[ 3.038871] systemd-udevd[62]: passed 126 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038876] systemd-udevd[77]: passed -1 bytes to netlink monitor 0x7f4fb498a250
[ 3.038878] systemd-udevd[77]: seq 714 processed with 0
[ 3.038891] systemd-udevd[62]: seq 716 queued, 'add' 'drivers'
[ 3.038915] systemd-udevd[62]: seq 717 queued, 'add' 'drivers'
[ 3.038928] systemd-udevd[62]: seq 718 queued, 'add' 'drivers'
[ 3.038941] systemd-udevd[62]: seq 719 queued, 'add' 'bus'
[ 3.038953] systemd-udevd[62]: passed 123 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038976] systemd-udevd[75]: seq 719 running
[ 3.038977] systemd-udevd[62]: seq 720 queued, 'add' 'drivers'
[ 3.038990] systemd-udevd[75]: no db file to read /run/udev/data/+bus:platform: No such file or directory
[ 3.038991] systemd-udevd[62]: seq 721 queued, 'add' 'drivers'
[ 3.039001] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
[ 3.039004] systemd-udevd[75]: seq 719 processed with 0
[ 3.039005] systemd-udevd[62]: seq 722 queued, 'add' 'drivers'
[ 3.039034] systemd-udevd[62]: seq 723 queued, 'add' 'drivers'
[ 3.039046] systemd-udevd[62]: passed 146 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.039070] systemd-udevd[75]: seq 720 running
[ 3.039078] systemd-udevd[76]: seq 721 running
[ 3.039081] systemd-udevd[75]: no db file to read /run/udev/data/+drivers:alarmtimer: No such file or directory
[ 3.039092] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
[ 3.039094] systemd-udevd[75]: seq 720 processed with 0
[ 3.039101] systemd-udevd[76]: no db file to read /run/udev/data/+drivers:clk-lpt: No such file or directory
[ 3.039128] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
[ 3.039133] systemd-udevd[76]: seq 721 processed with 0
[ 3.039146] systemd-udevd[67]: seq 715 running
[ 3.039162] systemd-udevd[67]: no db file to read /run/udev/data/+bus:pci_express: No such file or directory
[ 3.039177] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 3.039181] systemd-udevd[67]: seq 715 processed with 0
[ 3.039188] systemd-udevd[62]: passed 143 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.039200] systemd-udevd[62]: passed 151 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.039221] systemd-udevd[62]: passed 146 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.039224] systemd-udevd[77]: seq 722 running
[ 3.039235] systemd-udevd[78]: seq 723 running
[ 3.039244] systemd-udevd[77]: no db file to read /run/udev/data/+drivers:efi-framebuffer: No such file or directory
[ 3.039244] systemd-udevd[62]: seq 724 queued, 'add' 'drivers'
[ 3.039255] systemd-udevd[78]: no db file to read /run/udev/data/+drivers:serial8250: No such file or directory
[ 3.039257] systemd-udevd[62]: passed 142 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.039263] systemd-udevd[77]: passed -1 bytes to netlink monitor 0x7f4fb498a250
[ 3.039267] systemd-udevd[77]: seq 722 processed with 0
[ 3.039269] systemd-udevd[62]: passed 147 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.039273] systemd-udevd[78]: passed -1 bytes to netlink monitor 0x7f4fb498f600
[ 3.039277] systemd-udevd[78]: seq 723 processed with 0
[ 3.039284] systemd-udevd[75]: seq 717 running
[ 3.039288] systemd-udevd[76]: seq 718 running
[ 3.039298] systemd-udevd[75]: no db file to read /run/udev/data/+drivers:pcie_pme: No such file or directory
[ 3.039306] systemd-udevd[76]: no db file to read /run/udev/data/+drivers:pciehp: No such file or directory
[ 3.039309] sysGuys, I think I've found the strange thing.
First, in the recovery shell, when I type "lvm lvscan", it prints:
WARNING: lvmetad is running but disabled. Restart lvmetad before enabling it!
and then it says that all four my logical volumes root,boot,home and var are inactive.
So I tried to set them up manually, with "lvm vgchange -a y", and guess what happened: I was able to boot!
I still haven't managed to understand the real causes of this problem, but basically it seems that I have the same problem explained here: https://bbs.archlinux.org/viewtopic.php?id=184340.
The only difference is that there the OP says to have solved the problem with an upgrade to Linux 3.15.7, while it appeared to me with the upgrade to 3.18.3, and as I said it doesn't go away neither with a downgrade nor with another upgrade to version 3.18.4
Last edited by rdm (2015-01-29 21:55:44) -
[SOLVED] Unable to use DRI due to DRM problem
HI.
I have a Sony Vaio laptop with an ATI video card, and I'm using the opensource ATI video drivers.
The problem is that I'm unable to use DRI. I think it's because there's no DRM module loaded.
How can I fix that?
This info may be relevant:
bash-3.2# dmesg | grep agp
Linux agpgart interface v0.102
agpgart: Detected Ati IGP345M chipset
agpgart: AGP aperture is 128M @ 0xe8000000
bash-3.2# dmesg | grep -i drm
bash-3.2# lspci
00:00.0 Host bridge: ATI Technologies Inc RS200/RS200M AGP Bridge [IGP 340M] (rev 02)
00:01.0 PCI bridge: ATI Technologies Inc PCI Bridge [IGP 340M]
X.Org X Server 1.4.0.90
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-ARCH i686
Current Operating System: Linux blah 2.6.24-ARCH #1 SMP PREEMPT Wed Feb 27 01:15:32 CET 2008 i686
Build Date: 03 February 2008 02:54:48PM
Thank you.
Last edited by elifarley (2009-05-04 18:46:47)Hi signor_rossi.
The 'drm' module was not loaded because I didn't include the 'radeon' module in my rc.conf file
I added 'radeon' to my modules and restarted, which led to another problem. To solve this new problem, I had to declare some additional modules before the radeon module, like this:
ati_agp agpgart radeon radeonfb
(It seems that the 'ati_agp' and 'agpgart' modules must be loaded before the 'radeon' module)
I added the 'radeonfb' module just in case, but I'm not sure if I'll need it.
With this configuration in place, DRI is finally enabled, but now the screen is completely black
I started the X server with:
startx 2>startx.log
After the screen went all black, I killed X (by typing <ctrl>+<alt>+<backspace>) and typed 'reboot' in order to get a visible screen again.
This is the last part of 'startx.log':
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
init memmap
init common
init crtc1
init pll1
restore memmap
restore common
restore crtc1
restore pll1
restore LVDS
enable montype: 2
disable montype: 2
Backtrace:
Inconsistency detected by ld.so: dl-open.c: 260: dl_open_worker: Assertion `_dl_debug_initialize (0, args->nsid)->r_state == RT_CONSISTENT' failed!
waiting for X server to begin accepting connections
giving up.
xinit: Connection reset by peer (errno 104): unable to connect to X server
xinit: No such process (errno 3): Server error.
You can take a look at the Xorg.0.log file here: http://pastebin.ca/935744
In order to avoid the black screen, I have to disable DRI in my xorg.conf file...
Any idea is welcome.
Thanks.
Last edited by elifarley (2008-03-09 21:54:48) -
[SOLVED] Unable to install packages in lxc container
tl;dr: lxc-console should be used for logging in, not lxc-attach. Also, I had to do some additional work to get the tty to work in systemd, and I plan to update the wiki soon.
I created a container using the following command:
# lxc-create -n test -t archlinux
Once created and configured, I started the container daemonized, and attached:
# lxc-start -n test -d
# lxc-attach --clear-env -n test -- su - root
However, I am unable to install any software packages because GPG isn't working properly
[root@test ~]# pacman -Syu openssh
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
multilib is up to date
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
Packages (3): ldns-1.6.17-1 libedit-20130601_3.1-1 openssh-6.5p1-2
Total Installed Size: 6.08 MiB
:: Proceed with installation? [Y/n]
(3/3) checking keys in keyring [###########################] 100%
(3/3) checking package integrity [###########################] 100%
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: libedit: missing required signature
:: File /var/cache/pacman/pkg/libedit-20130601_3.1-1-x86_64.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n]
error: ldns: missing required signature
:: File /var/cache/pacman/pkg/ldns-1.6.17-1-x86_64.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n]
error: openssh: missing required signature
:: File /var/cache/pacman/pkg/openssh-6.5p1-2-x86_64.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n]
error: failed to commit transaction (invalid or corrupted package (PGP signature))
Errors occurred, no packages were upgraded.
error: segmentation fault
Please submit a full bug report with --debug if appropriate.
The container config is as follows:
lxc.utsname=test
lxc.autodev=1
lxc.tty=1
lxc.pts=1024
lxc.rootfs=/var/lib/lxc/test/rootfs
lxc.mount=/var/lib/lxc/test/fstab
lxc.cap.drop=mknod sys_module mac_admin mac_override
lxc.kmsg=0
lxc.stopsignal=SIGRTMIN+4
#networking
lxc.network.type=veth
lxc.network.link=br0
lxc.network.flags=up
lxc.network.name=eth0
lxc.network.ipv4=10.10.209.2/24
lxc.network.ipv4.gateway=10.10.209.1
lxc.network.mtu=1500
#cgroups
lxc.cgroup.devices.deny = a
lxc.cgroup.devices.allow = c *:* m
lxc.cgroup.devices.allow = b *:* m
lxc.cgroup.devices.allow = c 1:3 rwm
lxc.cgroup.devices.allow = c 1:5 rwm
lxc.cgroup.devices.allow = c 1:7 rwm
lxc.cgroup.devices.allow = c 1:8 rwm
lxc.cgroup.devices.allow = c 1:9 rwm
lxc.cgroup.devices.allow = c 1:9 rwm
lxc.cgroup.devices.allow = c 4:1 rwm
lxc.cgroup.devices.allow = c 5:0 rwm
lxc.cgroup.devices.allow = c 5:1 rwm
lxc.cgroup.devices.allow = c 5:2 rwm
lxc.cgroup.devices.allow = c 136:* rwm
Has anyone else experienced this? I've searched the web for solutions to the GPG error, and most of them relate to GPG not working in a chroot because the right things don't exist in /dev. However, I was under the impression that lxc.autodev=1 would take care of this, and indeed /dev/pts, etc. all exist in the container.
Last edited by archtaku (2014-02-07 23:19:12)x33a wrote:
Try
# pacman-key --refresh-keys
from within the container. Though, I do notice a segmentation fault, so I am not sure if it'll work.
I just did this, and the command succeeded:
gpg: refreshing 75 keys from hkp://pool.sks-keyservers.net
gpg: requesting key 5263801D from hkp server pool.sks-keyservers.net
gpg: requesting key FFF979E7 from hkp server pool.sks-keyservers.net
gpg: requesting key CDFD6BB0 from hkp server pool.sks-keyservers.net
gpg: requesting key 4C7EA887 from hkp server pool.sks-keyservers.net
... snip ...
gpg: Total number processed: 74
gpg: unchanged: 74
However, the installation still failed.
I was able to get pacman to install openssh by turning off signature verification. I then ssh'ed into the container, turned signature verification back on, and was able to install other packages just fine.
So the issue seems to be with how lxc-attach connects to the container. A temporary solution would be:
Add openssh to the list of packages installed when running lxc-create.
# lxc-create -n test -t archlinux -- -P vim,openssh
Attach to the container and run systemctl enable sshd.service, and set a root password
Detach, then ssh into container and go about your business.
However, I'd rather have the option of not using sshd on the container, and still be able to install packages, so I don't necessarily consider this problem solved yet.
Can anyone shed some light on what I might be doing wrong when I attach to the container?
Last edited by archtaku (2014-02-07 16:46:52) -
How to solve unable to connect ipad issue
Has anyone been able to solve the unable to connect to network issue?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
[SOLVED] Unable to determine major/minor number of root device - USB
I installed Arch on a USB harddrive of mine from within VirtualBox with the intention of running the installation (via the drive) on a laptop in my house. I passed through the drive through by creating a special vmdk (here - it's for "expert users only". ) and installed Arch on it by booting off the Arch 2011.08.19 iso and following the instructions. I do recall the installer complaining because /sbin/mkinitcpio was missing, so I copied over the one from the host (which is also an up-to-date Arch system). After that, everything worked and I was able to boot the drive within virtualbox.
Then I went and plugged it in to another laptop in the house and, surprisingly (for me at least), it got past GRUB. My joy was short-lived, because it failed just a bit later:
:: Running Hook [udev]
:: Triggering uevents...done.
ERROR: Unable to determine major/minor number of root device 'Waiting 10 seconds
for device /dev/disk/by-uuid/[the uuid] ...
/dev/disk/by-uuid/(the uuid)'.
You are being dropped to a recovery shell
Type 'exit' to try and continue booting
sh: can't access tty: job control turned off
[ramfs /]#
So I googled around for a while and plugged it back in to my computer, booted it up in virtualbox, and added "usb" to the HOOKS array right after udev in /etc/mkinitcpio.conf. Then I rebuilt the initramfs:
# mkinitcpio -p linux
So I plugged it back into the laptop, booted it, and got the same error.
Later, in an attempt to isolate the problem, I removed "sata" from HOOKS, ran the same mkinitcpio command again, and rebooted the VM. I got what looked like the same error as the one above. yay. So I guess the usb hook isn't being loaded or something like that. (I've since added the "sata" hook back and rebuilt the initramfs so I can mess around in the VM )
I've tried removing autodetect from HOOKS (saw that in some threads) and trying different USB ports on the laptop, but nothing seems to be working. I also checked to see if virtualbox was providing a bogus uuid or something, but the one it's specifying seems to be correct - I looked in my computer's /dev/disk/by-uuid and it matched.
Info on the drive (first partition is /boot, second is swap (derp!), third is /, and fourth is /home):
# sudo fdisk -l /dev/sdg
Disk /dev/sdg: 500.1 GB, 500107861504 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773167 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00016b3d
Device Boot Start End Blocks Id System
/dev/sdg1 * 63 208844 104391 83 Linux
/dev/sdg2 208845 4417874 2104515 82 Linux swap / Solaris
/dev/sdg3 4417875 209230559 102406342+ 83 Linux
/dev/sdg4 209230560 976768064 383768752+ 83 Linux
Screengrab of my VirtualBox storage setup (just for giggles):
My /etc/mkinitcpio.conf:
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES=""
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run first, so it may be used to
# override the actual binaries used in a given hook.
# (Existing files are NOT overwritten if already added)
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
# Some users may wish to include modprobe.conf for custom module options
# like so:
# FILES="/etc/modprobe.d/modprobe.conf"
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS="base udev autodetect pata scsi sata filesystems"
## This is identical to the above, except the old ide subsystem is
## used for IDE devices instead of the new pata subsystem.
# HOOKS="base udev autodetect ide scsi sata filesystems"
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS="base udev pata scsi sata usb filesystems"
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS="base udev pata mdadm encrypt filesystems"
## This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev usb lvm2 filesystems"
# Tried this line instead -- didn't work either
#HOOKS="base udev usb autodetect pata scsi sata filesystems usbinput"
HOOKS="base udev usb sata filesystems"
# COMPRESSION
# Use this to compress the initramfs image. With kernels earlier than
# 2.6.30, only gzip is supported, which is also the default. Newer kernels
# support gzip, bzip2 and lzma. Kernels 2.6.38 and later support xz
# compression.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""
My GRUB menu.lst:
# Config file for GRUB - The GNU GRand Unified Bootloader
# /boot/grub/menu.lst
# DEVICE NAME CONVERSIONS
# Linux Grub
# /dev/fd0 (fd0)
# /dev/sda (hd0)
# /dev/sdb2 (hd1,1)
# /dev/sda3 (hd0,2)
# FRAMEBUFFER RESOLUTION SETTINGS
# +-------------------------------------------------+
# | 640x480 800x600 1024x768 1280x1024
# ----+--------------------------------------------
# 256 | 0x301=769 0x303=771 0x305=773 0x307=775
# 32K | 0x310=784 0x313=787 0x316=790 0x319=793
# 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
# 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
# +-------------------------------------------------+
# for more details and different resolutions see
# https://wiki.archlinux.org/index.php/GRUB#Framebuffer_resolution
# general configuration:
timeout 5
default 0
color light-blue/black light-cyan/blue
# boot sections follow
# each is implicitly numbered from 0 in the order of appearance below
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
# (0) Arch Linux
title Arch Linux
root (hd0,0)
kernel /vmlinuz-linux root=/dev/disk/by-uuid/b4a677d0-cb0d-4acd-bb09-2dc2f4b9501f ro
initrd /initramfs-linux.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd0,0)
kernel /vmlinuz-linux root=/dev/disk/by-uuid/b4a677d0-cb0d-4acd-bb09-2dc2f4b9501f ro
initrd /initramfs-linux-fallback.img
# (2) Windows
#title Windows
#rootnoverify (hd0,0)
#makeactive
#chainloader +1
Last edited by UncleNinja (2011-12-02 15:33:21)UncleNinja wrote:
skunktrader wrote:https://bugs.archlinux.org/task/27385
Perfect! Thank you!
Would it be safe to copy over the version from HEAD into my mkinitcpio?
EDIT: nevermind, derp derp the package is updated
EDIT again: Actually, it's not.
I copied over the init_functions in HEAD into /lib/initcpio/init_functions and rebuilt the initramfs. It worked!
Thanks guys!
Last edited by UncleNinja (2011-12-02 15:35:20) -
SOLVED - Unable to login into xfce after upgrade
I upgraded my Arch computer. When rebooting I get SLIM and can enter my login/password but can go any further as it loops back to SLIM. I've read another post on consolekit & HAL.
I have consolekit 0.4.1-2 and HAL 0.5.14-1. SLIM gets started via /etc/inittab
id:5:initdefault:
x:5:respawn:/usr/bin/slim >& /dev/null
And my .xinitrc looks like:
#!bin/sh
exec ck-launch-session startxfce4
It has been working for months this way. Too bad to be stuck today.
Any hint on how I can debug this issue?
Thanks
Alphazo
---> ANSWER IS HERE:
http://bbs.archlinux.org/viewtopic.php?id=86747
Just had to
sudo rm ~/.ICEauthority
and rebooted.
COOL... That didn't even give me enough time to get nervous.
EDIT
I killed SLIM and tried to launch 'startx'. I don't know how to copy/paste from the command line but what I see is :
(EE) Failed to load module "fbdev" (module does not exist, 0)
xf86TokenToOptInfo: table is NULL
(EE) config/hal: couldn't find input devices: org.freedesktop.DBus.Error.AccessDenied (Rejected send message, 1 matched rules; type="method_call", sender.........
<stdin>3: error: Unknown #directive "Xft"
EDIT2
Here is a copy of the log files after rebooting:
/var/log/slim.log
/usr/bin/xauth: creating new authority file /var/run/slim.auth
slim: waiting for X server to begin accepting connections
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.3.901 (1.7.4 RC 1)
Release Date: 2009-12-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-ARCH i686
Current Operating System: Linux ARCH-DN 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009 i686
Kernel command line: root=/dev/disk/by-uuid/046d7122-21a4-47df-8f19-3fb5ebec9192 ro vga=773
Build Date: 12 December 2009 12:59:40PM
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 24 19:46:20 2009
(==) Using default built-in configuration (30 lines)
.(EE) Failed to load module "fbdev" (module does not exist, 0)
xf86TokenToOptinfo: table is NULL
xf86TokenToOptinfo: table is NULL
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
Errors from xkbcomp are not fatal to the X server
/usr/bin/xauth: creating new authority file /home/dnativel/.Xauthority
/usr/bin/startxfce4: X server already running on display :0.0
<stdin>:1: error: Unknown #directive "Those"
# Those are fallback settings, use the ui plugin to change it
<stdin>:2: error: Unknown #directive "or"
# or add your overrides to ~/.Xresources
<stdin>:3: error: Unknown #directive "Xft"
# Xft.hintstyle: hintnone/hintslight/hintmedium/hintfull
<stdin>:4: error: Unknown #directive "Xft"
# Xft hinting: 1/0
4 errors in preprocessor.
xrdb: "Xft.hinting" on line 9 overrides entry on line 6
xrdb: "Xft.hintstyle" on line 11 overrides entry on line 7
Agent pid 3015
xfce4-session: Unable to access file /home/dnativel/.ICEauthority: Permission non accordée
Agent pid 3015 killed
slim: waiting for X server to shut down.
/usr/bin/xauth: creating new authority file /var/run/slim.auth
slim: waiting for X server to begin accepting connections
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.3.901 (1.7.4 RC 1)
Release Date: 2009-12-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-ARCH i686
Current Operating System: Linux ARCH-DN 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009 i686
Kernel command line: root=/dev/disk/by-uuid/046d7122-21a4-47df-8f19-3fb5ebec9192 ro vga=773
Build Date: 12 December 2009 12:59:40PM
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 24 19:46:56 2009
(==) Using default built-in configuration (30 lines)
(EE) Failed to load module "fbdev" (module does not exist, 0)
xf86TokenToOptinfo: table is NULL
xf86TokenToOptinfo: table is NULL
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
Errors from xkbcomp are not fatal to the X server
/var/log/Xorg.0.log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.3.901 (1.7.4 RC 1)
Release Date: 2009-12-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-ARCH i686
Current Operating System: Linux ARCH-DN 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009 i686
Kernel command line: root=/dev/disk/by-uuid/046d7122-21a4-47df-8f19-3fb5ebec9192 ro vga=773
Build Date: 12 December 2009 12:59:40PM
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 24 19:46:56 2009
(II) Loader magic: 0x81e4c60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:0:2:0) 8086:27a2:1028:0201 Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xeff00000/524288, 0xd0000000/268435456, 0xefec0000/262144, I/O @ 0x0000eff8/8
(--) PCI: (0:0:2:1) 8086:27a6:1028:0201 Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xeff80000/524288
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default intel Device 0"
Driver "intel"
EndSection
Section "Screen"
Identifier "Builtin Default intel Screen 0"
Device "Builtin Default intel Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default intel Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default intel Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default intel Device 0"
(==) No monitor specified for screen "Builtin Default intel Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AutoAddDevices.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 2.9.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.0.901, module version = 2.2.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 00@00:02:0
(WW) Falling back to old probe method for vesa
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
"Builtin Default intel Screen 0" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
(--) intel(0): Chipset: "945GM"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xEFF00000 size 524288
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(II) intel(0): the SDVO device with slave addr 70 is found on DVO 1 port
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA has no monitor section
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "LCD", prod id 14086
xf86TokenToOptinfo: table is NULL
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): I2C bus "SDVOB DDC Bus" initialized.
(II) intel(0): Output TMDS-1 has no monitor section
(II) intel(0): SDVOB: device VID/DID: 04:AA.03, clock range 25.0MHz - 165.0MHz
(II) intel(0): SDVOB: 1 input channel
(II) intel(0): SDVOB: TMDS0 output reported
xf86TokenToOptinfo: table is NULL
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): Current clock rate multiplier: 1
(II) intel(0): EDID vendor "LCD", prod id 14086
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TMDS-1 disconnected
(II) intel(0): Output TV disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x00000000 to 0x00000020
(WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000000 to 0x00000400
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000000 to 0x00000203
(WW) intel(0): PIPEASTAT before: status:
(WW) intel(0): PIPEASTAT after: status: VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000202 to 0x80000202
(WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): Kernel reported 488960 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1955836 kB available
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): Current clock rate multiplier: 1
(II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x005fffff: compressed frame buffer (6144 kB, 0x000000007f800000 physical
(II) intel(0): 0x00600000-0x00600fff: compressed ll buffer (4 kB, 0x000000007fe00000 physical
(II) intel(0): 0x00601000-0x0060afff: HW cursors (40 kB, 0x000000007fe01000 physical
(II) intel(0): 0x0060b000-0x0060bfff: overlay registers (4 kB, 0x000000007fe0b000 physical
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0f9f3fff: DRI memory manager (248020 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB) X tiled
(II) intel(0): 0x0f9f4000: end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane B is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane A is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TMDS-1 is connected to pipe none
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 211
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "fr"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device AlpsPS/2 ALPS DualPoint TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.2.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.1
(**) Option "Device" "/dev/input/event8"
(II) AlpsPS/2 ALPS DualPoint TouchPad: x-axis range 0 - 1023
(II) AlpsPS/2 ALPS DualPoint TouchPad: y-axis range 0 - 767
(II) AlpsPS/2 ALPS DualPoint TouchPad: pressure range 0 - 127
(II) AlpsPS/2 ALPS DualPoint TouchPad: finger width range 0 - 0
(II) AlpsPS/2 ALPS DualPoint TouchPad: buttons: left right middle
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
(**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
(II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD)
(**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping acceleration scheme 1
(**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration profile 0
(--) AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
(II) config/hal: Adding input device DualPoint Stick
(**) DualPoint Stick: always reports core events
(**) DualPoint Stick: Device: "/dev/input/event7"
(II) DualPoint Stick: Found 3 mouse buttons
(II) DualPoint Stick: Found relative axes
(II) DualPoint Stick: Found x and y relative axes
(II) DualPoint Stick: Configuring as mouse
(**) DualPoint Stick: YAxisMapping: buttons 4 and 5
(**) DualPoint Stick: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "DualPoint Stick" (type: MOUSE)
(**) DualPoint Stick: (accel) keeping acceleration scheme 1
(**) DualPoint Stick: (accel) acceleration profile 0
(II) DualPoint Stick: initialized for relative axes.
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event4"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "fr"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "fr"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "fr"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event5"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "fr"
(II) AIGLX: Suspending AIGLX clients for VT switch
Last edited by alphazo (2009-12-25 00:04:20)Hi John,
Thanks for reply
I got error while doing following steps in few procedures
Change directory to c:\oraclexe\apex\owa, open the README.TXT file and follow the instructions within to complete the installation
Before doing the above step i was able to login into my application but without images
Can you please help that how to check those errors and any particular procedure you know which is responsible for the Login problem.
Thanks a Lot for help John
Thanks & Regards
Sanjay -
[SOLVED] Unable to Boot Windows 7 from GRUB
I recently reinstalled Arch onto my laptop (Lenovo Thinkpad t520) and have been having problems with Grub. For the last week I've been having trouble getting it to run grub at boot at all, only being able to run windows 7 by flagging it as the bootable drive. The other day I finally got it to boot into grub, and from grub I can boot into Arch. However, I can not boot into windows 7 through grub. When I attempt to, it throws an error:
Invalid EFI file path
I'm somewhat new to arch, and especially new to efi bootloading and such. Right now the only way I can get into windows is either booting from the arch install disk > boot other os and specifying partition 2 (where I have windows installed) or by pressing f12 at boot. When I do this (not sure what the term is, if anyone knows please tell me), it brings up a menu asking where I want to boot with "arch_efi" "cd drive" "Hard drive" etc. I choose hard drive and it will then boot to windows by default. Booting normally takes me to grub where I can boot into arch but not windows. If there's any more info you need please let me know and I'll try to provide it. Thanks in advance.
Also, here is my current partition setup
/dev/sda1 /boot/efi
/dev/sda2 Windows7
/dev/sda3 Extended partition containing sda 5,6, & 7
/dev/sda4 swap
/dev/sda5 /boot
/dev/sda6 /
/dev/sda7 /home
UPDATE
Terminator seems to be right (still on a roll!), so I wiped the partition I had grub on, removed grub, and installed syslinux. Now I have another problem that I'm hoping can be solved in the same thread to avoid another. It boots to syslinux no problem, and I can boot to windows from there all good, but when I select arch I get:
Root device mounted successfully but /sbin/init does not exist
I haven't been able to look for solutions too much on my own, but any help would be appreciated, thank you.
Last edited by IamFuzzles (2012-08-22 04:20:56)Terminator wrote:If I understand it correctly, what you are trying is impossible: you are trying to boot windows using UEFI on a disk with MBR partitioning. Windows 7 only supports UEFI on discs with GPT partitioning but AFAIK, extended partitions only exist in MBR partitioning.
i also saw this in the arch wiki, but i have a brand new lenovo ideapad y570 running windows 7 64-bit that i'm in the process of setting up for someone, and it has what i think is an efi system partition but the disk uses mbr partitioning. does anyone know why this might be, or is there a way i can verify that the system is actually being booted via bios-mbr?
Last edited by e_tank (2012-08-21 11:56:15) -
[SOLVED]Unable to boot in UEFI mode from CD
Hello gents!
Here's the problem:
According to the beginner's guide I followed the instruction to test if I am in UEFI mode:
In case you have a UEFI motherboard, the CD/USB will launch UEFI Shell and display a message that
startup.nsh
script will be launched. Allow the shell to launch it. Then, to check whether you have booted into UEFI mode, load the efivars kernel module (before chrooting) and then check whether there are files in
/sys/firmware/efi/vars/
# modprobe efivars # before chrooting
# ls -1 /sys/firmware/efi/vars/
Well, the thing is that when I boot the CD no UEFI Shell is launched as well as no
startup.nsh
When I try to load the efivars I don't receive any message, so, I assume, the module is loaded; but the, when I invoke ls the message I receive is:
#ls: cannot access /sys/firmware/efi/vars/: No such file or directory
To me it looks that for some reason I am unable to access the UEFI mode when starting the CD iso.
Thank you guys for your courteous attention.
Have a wonderful day!!!
P.S. I've searched already in the following posts:
https://bbs.archlinux.org/viewtopic.php … 84#p148184
https://bbs.archlinux.org/viewtopic.php … 55#p148155
P.S.2
My mobo is an ASUS Maximus V Gene with i3770K on it.
Edit:
Ok guys! Thanks to all of you, but everything was brought about by my scarce knowledge of the mobo. Logging into the BIOS, in the boot section, you have to choose between normal DVD and UEFI DVD. When selecting the last, everything, I mean, the startup phase at least, went well.
Enjoy everybody
Any idea how to close/"solved" this forum tread?
Last edited by guidone (2012-09-11 20:34:21)guidone wrote:Any idea how to close/"solved" this forum tread?
README: Forum Rules
Simply edit the original post by clicking on the 'edit' button at the lower right corner of it and prepend [SOLVED] to the title. -
[SOLVED] Unable to boot after update
After full system upgrade my arch is unable to boot kernel:
ERROR: device 'UUID=xxx...' not found, skipping fsck.
ERROR: unable to find root device 'UUID=xxx...'
You're being dropped to a recovery shell
I'm pretty sure UUID of /dev/sda2 is correct (double checked with Ubuntu live cd).
Last edited by soroush (2012-09-06 12:20:15)Then you need to provide more information. Bootloader? Kernel? Tried fallback initramfs?
Edit: OK, you solved it. pacman does regenerate the initramfs if the kernel is updated. It just didn't work for you this time.
Last edited by progandy (2012-09-06 12:21:55)
Maybe you are looking for
-
IPhoto 9.4.3-keyword "" not working correctly in smart albums
Every May I work on the 5th Grade recognition slideshow (using Keynote) for our 5th grade students. In iPhoto, I always give photos the checkmark keyword after I've placed that photo so that I know it's been added/used. I have many smart photo albu
-
Does anyone know how to run an export in background mode for windows ? Normally in unix I would simply nohup the expdp command. Also what is the purpose of being able to reattach to a job in Data Pump - that in itself would suggest the export is alre
-
How can I get a contact number deleted
I delete it by mistake a number and I need to call back
-
Hi Experts, Could you please let me know what is consolidation in BPC and how helpful it would be for Planners. Please send me the basic documents related to consolidation . Thanks. Regards, Sanjeev
-
Error Exporting - File Not Found - due to Summary Information Title
I downloaded the vbnet_win_SimplePreviewReport and modified it slightly in order to duplicate the export problem I'm having. I'm using Crystal Reports 2008 in VB.NET. I opened the World Sales report and edited the Summary Info (Crystal Reports > Rep