[solved]Update of x264 and ffmpeg breaks MPD

Updating to x264-20100107-1 and ffmpeg-20100108-2 had a bad effect on MPD today
error while loading shared libraries: libx264.so.67
error while loading shared libraries libavutil.so.49
Were the error I got after update when trying to start mpd.
Rather than do the ugly ls -s fix I'll wait for a rebuild/fix.
Anyone else??
Last edited by jwbirdsong (2010-01-10 23:26:56)

I've not pulled in my msg from arch-dev-public in last 24 hrs or so... my bad.
I at least did ask in #archlinux and got no response before posting here.
wonder wrote:P.S mpd rebuilt has landed testing.
good... I somehow knew if I posted this to begin w/ MPD would be rebuilt/uploaded soon soon after I posted.
Last edited by jwbirdsong (2010-01-10 23:28:33)

Similar Messages

[SOLVED] rc.xml: & ampersand and # hash break Openbox keybinding URL's

I'm trying to get a keybinding to work in Openbox's rc.xml, so that when I press W-XF86Mail it opens a Google documents spreadsheet.
rc.xml:
<keybind key="W-XF86Mail">
<action name="Execute">
<execute>firefox https://spreadsheets.google.com/ccc?key=0AjuCrdYnTCyacGNfX0FuRzBFUnBOalNxS0VXYjJhVUE&hl=en#gid=3</execute>
</action>
</keybind>
Other keybindings in the same file work fine. But when I reconfigure Openbox I get an error message "One or more XML syntax errors were found while parsing the Openbox configutation files...". After reconfiguration, I press W-XF86Mail and it starts Firefox but opens the wrong URL - the first bit is correct but the last bit reads ...key=0AjuCrdYnTCyacGNfX0FuRzBFUnBOalNxS0VXYjJhVUE=en instead. As you can see the last bit &hl=en#gid=3 is missing. If I delete the & ampersand then the hash # character seems to cause the same problem. Is there a problem with using the ampersand or hash characters in keybindings?
Last edited by dameunmate (2010-09-04 14:24:50)

thanks for the tips, I've now got the right page to load when I type the command into the urxvt terminal. But it still doesn't work with Openbox keybindings, I edit and reconfigure but press the keys and get no response at all. I've checked and the same keybinding will successfully open other programs and webpages. Here's the keybinding in /home/username/.config/openbox/rc.xml:
<keybind key="W-XF86Mail">
<action name="Execute">
<execute>urxvt -e gdocspread</execute>
</action>
</keybind>
I've also tried <execute>urxvt -c gdocspread</execute> and simply <execute>gdocspread</execute> to no avail. However changing the same keybinding command to <execute>urxvt</execute> does open urxvt successfuly.
So the keybinding will open urxvt, and if I manually open a urxvt terminal and type gdocspread firefox starts on my desired web page. So what's the missing link?
NB: About the ampersand:
For some reason even from the terminal it won't work with the ampersand, but I discovered that I can leave that out as it just defines the language. However for future reference it would be useful to know how to put an ampersand in a URL. This is the code that does load the correct page:
home/username/.bashrc
# Check for an interactive session
[ -z "$PS1" ] && return
alias ls='ls --color=auto'
PS1='[\u@\h \W]\$ '
gdocspread() {
firefox https://spreadsheets.google.com/ccc?key=0AjuCrdYnTCyacGNfX0FuRzBFUnBOalNxS0VXYjJhVUE&hl=en#gid=3
Interestingly the URL etc...key=0AjuCrdYnTCyacGNfX0FuRzBFUnBOalNxS0VXYjJhVUE&hl=en#gid=3 and the URL etc...key=0AjuCrdYnTCyacGNfX0FuRzBFUnBOalNxS0VXYjJhVUE&hl=en#gid=3 won't load, the URL gets cut off at the ampersand.
Furthermore it's interesting to note that in the above configuration file /home/username/.bashrc only the ampersand causes problems, but in /home/username/openbox/rc.xml both the ampersand and the hash characters cause the URL to be cut off.

[SOLVED] libva update breaks mpd

Today's libva update to 1.0.4 makes mpd refuse to start, printing "error while loading shared libraries: libva-0.31.0.6.so.1" instead.
edit: Downgrade to 0.31.1_p3-1 doesn't help, but with 0.31.0_p13-2 mpd starts just fine.
Last edited by misc (2010-08-07 19:39:28)

wonder wrote:mpd doesn't link to libva. ffmpeg does and that's your starting point
That's it, thanks. I have ffmpeg-svn installed; updating that fixed the problem.

Hello I'm trying to update my applications and it is asking me to sign in and checking my billing account .it is not accepting my billing account that I use tried to change it several time it didn't work .what can I do to solve it?

Hello I'm trying to update my applications and it is asking me to sign in and checking my billing account .it is not accepting my billing account that I use tried to change it several time it didn't work .what can I do to solve it?

What happens when you try to confirm your details, if you are getting an error message then what does it say ? For a card to be accepted (debit cards are no longer accepted in all countries) it needs to be registered to exactly the same name and address as on your account, and have been issued by a bank in your country. If it's not being accepted then do you get the 'none' option on your account ?

I've just updated to Lion and aperture 3.4.1. I'm finding the slideshow is coming on automatically and then it crashes. Anyone know how to solve this?

I've just updated to Lion and aperture 3.4.1. I'm finding the slideshow is coming on automatically and then it crashes. Anyone know how to solve this?

Try resetting PRAM.
Reset PRAM. http://support.apple.com/kb/PH4405
Best.

I am not getting my iCloud or other mail thru...I had an update last week and it quit also. I simply turned mail off and on and it solved the problem. Now simply nothing is coming thru....I think I've tried everything....can anyone give me suggestions

I am not getting my iCloud or other mail thru...I had an update last week and it quit also. I simply turned mail off and on and it solved the problem. Now simply nothing is coming thru....I think I've tried everything....can anyone give me suggestions

I am not getting my iCloud or other mail thru...I had an update last week and it quit also. I simply turned mail off and on and it solved the problem. Now simply nothing is coming thru....I think I've tried everything....can anyone give me suggestions

I have just updated my iPad and now cannot access any apps as they just close down straight away. Any ideas why and how to solve?

I have just updated my iPad and now cannot access any apps as they just close down straight away. Any ideas why and how to solve?

Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
I've also seen it suggested that people try downloading a free app from the store onto the iPad (as that seems to reset something), and then re-try the apps - the free app can then be deleted.

[Solved]Updated system, and dealing with glibc issue.

I neglected to update/use Arch for quite some time, and decided to last night. I quickly encountered problems and I've read https://www.archlinux.org/news/filesyst … equired-1/, https://www.archlinux.org/news/the-lib- … a-symlink/, https://www.archlinux.org/news/fontconf … -required/, http://allanmcrae.com/2012/07/updating- … e-install/, and many threads about issues with filesystem and/or glibc.
First, I followed the instructions to resolve the issue with fontconfig.
<read various threads>
Then, I landed here: https://wiki.archlinux.org/index.php/De … iki:usrlib. I installed glibc-2.16.0-1-x86_64 using the instructions provided. IIRC, I was still experiencing conflicts with filesystem. I came across a thread where a user stated that instructions from Allan McRae's blog (from the link at the top) allowed him to upgrade his system. I tried it out, and I got around the filesystem issue as well as the issue with dependencies linked to tzdata, etc. My issue now lies with the pacman -Su step:
[asdf@asdf ~]$ sudo pacman -Su
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
Targets (1): glibc-2.16.0-5
Total Installed Size: 37.63 MiB
Net Upgrade Size: 0.05 MiB
Proceed with installation? [Y/n] y
(1/1) checking package integrity [###############################] 100%
(1/1) loading package files [###############################] 100%
(1/1) checking for file conflicts [###############################] 100%
error: failed to commit transaction (conflicting files)
glibc: /lib exists in filesystem
Errors occurred, no packages were upgraded.
Following Issue 2 under https://wiki.archlinux.org/index.php/De … iki:usrlib, I entered
$ grep '^lib/' /var/lib/pacman/local/*/files
. The output was:
/var/lib/pacman/local/consolekit-0.4.5-2/files:lib/
/var/lib/pacman/local/consolekit-0.4.5-2/files:lib/security/
/var/lib/pacman/local/consolekit-0.4.5-2/files:lib/security/pam_ck_connector.so
/var/lib/pacman/local/consolekit-0.4.5-2/files:lib/systemd/
/var/lib/pacman/local/consolekit-0.4.5-2/files:lib/systemd/system/
/var/lib/pacman/local/consolekit-0.4.5-2/files:lib/systemd/system/basic.target.wants/
/var/lib/pacman/local/consolekit-0.4.5-2/files:lib/systemd/system/basic.target.wants/console-kit-log-system-start.service
/var/lib/pacman/local/consolekit-0.4.5-2/files:lib/systemd/system/console-kit-daemon.service
/var/lib/pacman/local/consolekit-0.4.5-2/files:lib/systemd/system/console-kit-log-system-restart.service
/var/lib/pacman/local/consolekit-0.4.5-2/files:lib/systemd/system/console-kit-log-system-start.service
/var/lib/pacman/local/consolekit-0.4.5-2/files:lib/systemd/system/console-kit-log-system-stop.service
/var/lib/pacman/local/consolekit-0.4.5-2/files:lib/systemd/system/halt.target.wants/
/var/lib/pacman/local/consolekit-0.4.5-2/files:lib/systemd/system/halt.target.wants/console-kit-log-system-stop.service
/var/lib/pacman/local/consolekit-0.4.5-2/files:lib/systemd/system/kexec.target.wants/
/var/lib/pacman/local/consolekit-0.4.5-2/files:lib/systemd/system/kexec.target.wants/console-kit-log-system-restart.service
/var/lib/pacman/local/consolekit-0.4.5-2/files:lib/systemd/system/poweroff.target.wants/
/var/lib/pacman/local/consolekit-0.4.5-2/files:lib/systemd/system/poweroff.target.wants/console-kit-log-system-stop.service
/var/lib/pacman/local/consolekit-0.4.5-2/files:lib/systemd/system/reboot.target.wants/
/var/lib/pacman/local/consolekit-0.4.5-2/files:lib/systemd/system/reboot.target.wants/console-kit-log-system-restart.service
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/ld-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/ld-linux-x86-64.so.2
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libBrokenLocale-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libBrokenLocale.so.1
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libSegFault.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libanl-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libanl.so.1
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libc-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libc.so.6
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libcidn-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libcidn.so.1
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libcrypt-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libcrypt.so.1
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libdl-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libdl.so.2
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libm-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libm.so.6
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libmemusage.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnsl-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnsl.so.1
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_compat-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_compat.so.2
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_db-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_db.so.2
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_dns-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_dns.so.2
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_files-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_files.so.2
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_hesiod-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_hesiod.so.2
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_nis-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_nis.so.2
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_nisplus-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_nisplus.so.2
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libpcprofile.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libpthread-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libpthread.so.0
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libresolv-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libresolv.so.2
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/librt-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/librt.so.1
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libthread_db-1.0.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libthread_db.so.1
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libutil-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libutil.so.1
/var/lib/pacman/local/hal-0.5.14-6/files:lib/
/var/lib/pacman/local/hal-0.5.14-6/files:lib/udev/
/var/lib/pacman/local/hal-0.5.14-6/files:lib/udev/rules.d/
/var/lib/pacman/local/hal-0.5.14-6/files:lib/udev/rules.d/90-hal.rules
/var/lib/pacman/local/lib32-glibc-2.14-5/files:lib/
/var/lib/pacman/local/lib32-glibc-2.14-5/files:lib/ld-linux.so.2
/var/lib/pacman/local/ntfs-3g-2012.1.15-4/files:lib/
Being a newb, I didn't want to do something stupid, so I didn't take any action here..
I proceeded on with trying
find /lib -exec pacman -Qo -- {} +
The output was:
error: cannot determine ownership of directory '/lib'
/lib/libutil.so.1 is owned by glibc 2.16.0-1
/lib/libnsl.so.1 is owned by glibc 2.16.0-1
/lib/libnss_compat-2.16.so is owned by glibc 2.16.0-1
/lib/libSegFault.so is owned by glibc 2.16.0-1
/lib/ld-linux.so.2 is owned by lib32-glibc 2.14-5
/lib/ld-2.16.so is owned by glibc 2.16.0-1
/lib/libpthread.so.0 is owned by glibc 2.16.0-1
/lib/libnss_nisplus.so.2 is owned by glibc 2.16.0-1
/lib/libthread_db-1.0.so is owned by glibc 2.16.0-1
/lib/librt-2.16.so is owned by glibc 2.16.0-1
/lib/libnss_files.so.2 is owned by glibc 2.16.0-1
error: cannot determine ownership of directory '/lib/ufw'
error: No package owns /lib/ufw/user6.rules.pacsave
error: No package owns /lib/ufw/user.rules.pacsave
error: cannot determine ownership of directory '/lib/udev'
error: cannot determine ownership of directory '/lib/udev/rules.d'
/lib/udev/rules.d/90-hal.rules is owned by hal 0.5.14-6
/lib/libnss_hesiod-2.16.so is owned by glibc 2.16.0-1
/lib/libnss_dns.so.2 is owned by glibc 2.16.0-1
/lib/libnss_hesiod.so.2 is owned by glibc 2.16.0-1
/lib/libm.so.6 is owned by glibc 2.16.0-1
/lib/libnss_files-2.16.so is owned by glibc 2.16.0-1
/lib/libc-2.16.so is owned by glibc 2.16.0-1
/lib/libBrokenLocale.so.1 is owned by glibc 2.16.0-1
/lib/libdl.so.2 is owned by glibc 2.16.0-1
/lib/libutil-2.16.so is owned by glibc 2.16.0-1
/lib/libBrokenLocale-2.16.so is owned by glibc 2.16.0-1
/lib/libpthread-2.16.so is owned by glibc 2.16.0-1
/lib/libnss_nisplus-2.16.so is owned by glibc 2.16.0-1
/lib/librt.so.1 is owned by glibc 2.16.0-1
/lib/libnss_nis-2.16.so is owned by glibc 2.16.0-1
/lib/libc.so.6 is owned by glibc 2.16.0-1
/lib/libcrypt-2.16.so is owned by glibc 2.16.0-1
/lib/libresolv-2.16.so is owned by glibc 2.16.0-1
/lib/libnss_db.so.2 is owned by glibc 2.16.0-1
/lib/libcidn.so.1 is owned by glibc 2.16.0-1
/lib/libresolv.so.2 is owned by glibc 2.16.0-1
/lib/libmemusage.so is owned by glibc 2.16.0-1
/lib/ld-linux-x86-64.so.2 is owned by glibc 2.16.0-1
error: cannot determine ownership of directory '/lib/security'
/lib/security/pam_ck_connector.so is owned by consolekit 0.4.5-2
/lib/libanl-2.16.so is owned by glibc 2.16.0-1
/lib/libnss_compat.so.2 is owned by glibc 2.16.0-1
/lib/libcidn-2.16.so is owned by glibc 2.16.0-1
/lib/libm-2.16.so is owned by glibc 2.16.0-1
/lib/libcrypt.so.1 is owned by glibc 2.16.0-1
error: cannot determine ownership of directory '/lib/systemd'
error: cannot determine ownership of directory '/lib/systemd/system'
/lib/systemd/system/console-kit-daemon.service is owned by consolekit 0.4.5-2
/lib/systemd/system/console-kit-log-system-restart.service is owned by consolekit 0.4.5-2
error: cannot determine ownership of directory '/lib/systemd/system/kexec.target.wants'
/lib/systemd/system/kexec.target.wants/console-kit-log-system-restart.service is owned by consolekit 0.4.5-2
error: cannot determine ownership of directory '/lib/systemd/system/basic.target.wants'
/lib/systemd/system/basic.target.wants/console-kit-log-system-start.service is owned by consolekit 0.4.5-2
error: cannot determine ownership of directory '/lib/systemd/system/poweroff.target.wants'
/lib/systemd/system/poweroff.target.wants/console-kit-log-system-stop.service is owned by consolekit 0.4.5-2
error: cannot determine ownership of directory '/lib/systemd/system/halt.target.wants'
/lib/systemd/system/halt.target.wants/console-kit-log-system-stop.service is owned by consolekit 0.4.5-2
error: cannot determine ownership of directory '/lib/systemd/system/reboot.target.wants'
/lib/systemd/system/reboot.target.wants/console-kit-log-system-restart.service is owned by consolekit 0.4.5-2
/lib/systemd/system/console-kit-log-system-stop.service is owned by consolekit 0.4.5-2
/lib/systemd/system/console-kit-log-system-start.service is owned by consolekit 0.4.5-2
/lib/libdl-2.16.so is owned by glibc 2.16.0-1
/lib/libnsl-2.16.so is owned by glibc 2.16.0-1
/lib/libnss_nis.so.2 is owned by glibc 2.16.0-1
/lib/libnss_dns-2.16.so is owned by glibc 2.16.0-1
/lib/libpcprofile.so is owned by glibc 2.16.0-1
/lib/libnss_db-2.16.so is owned by glibc 2.16.0-1
/lib/libanl.so.1 is owned by glibc 2.16.0-1
/lib/libthread_db.so.1 is owned by glibc 2.16.0-1
Again, I'm not sure what to do here.
On an irrelevant note, a red flag went up earlier. By some means, it appears I messed up Arch. Is there a chance I can fix the issue with the kernel or is the best option a reinstall?
(482/563) upgrading linux [################] 100%
>>> Updating module dependencies. Please wait ...
depmod: ERROR: could not open directory /lib/modules/3.6.10-1-ARCH: No such file or directory
depmod: FATAL: could not search modules: No such file or directory
>>> Generating initial ramdisk, using mkinitcpio. Please wait...
==> Building image from preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> ERROR: '/lib/modules/3.6.10-1-ARCH' is not a valid kernel module directory
==> Building image from preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> ERROR: '/lib/modules/3.6.10-1-ARCH' is not a valid kernel module directory
error: command failed to execute correctly
(498/563) upgrading nvidia [################] 100%
depmod: ERROR: could not open directory /lib/modules/3.6.10-1-ARCH: No such file or directory
depmod: FATAL: could not search modules: No such file or directory
If your card is from the 7xxx series or earlier, install nvidia-304xx
[asdf@asdf ~]$ ls -ld /lib
drwxr-xr-x 6 root root 4096 Dec 22 15:11 /lib
[asdf@asdf ~]$ mkinitcpio -p linux
==> Building image from preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> ERROR: '/lib/modules/3.6.10-1-ARCH' is not a valid kernel module directory
==> Building image from preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> ERROR: '/lib/modules/3.6.10-1-ARCH' is not a valid kernel module directory
Thanks in advance.
Last edited by illusory (2012-12-24 00:24:47)

I checked out https://wiki.archlinux.org/index.php/Initramfs, and I'm not sure what to do. I rebooted a few times in attempt to get things going. I'm assuming I need to start by logging in to the live CD as root and mounting the sda in which Arch is installed? I don't know how to mount root nor know the complete title for the Arch partition (sda x,x). Sorry for the hassle.
Edit: Found https://wiki.archlinux.org/index.php/Ch … partitions. Be back in a bit.
I currently have the temporary filesystems mounted, chrooted, and am in bash.
# mkinitcpio -p linux
doesn't work. I tried
mkinitcpio -g ..... 3.6.10-1-ARCH
and I received something about 3.6.10 and a module directory.
Last edited by illusory (2012-12-23 23:26:00)

Windows Updater Not Installing and Troubleshooter Wizard Is Not Working???

I am in need help desperately!
        I have tried to install the Windows 7 latest update since late October 2014 and every time that I have tried it has failed, this is messing with certain programs to either not run such as my Troubleshooter,
leaving me unable to fix the issue, and making my computer to run poorly as well as when I am on Firefox unable to load pages, do downloads, watch movies & TV, or watch videos on You Tube without having to move the mouse around to keep it running and just
freeze the picture on the You Tube and Xfinity but the sound keeps playing though. I am unable to run the Troubleshooter Wizard at all; gives me an error code 0x80131018. I have gone to the forums to find a solution I tried everything possible. Such
as trying to do all the maintenance; disc clean ups, compressing files to save on space, checking the disc drives for errors, defragmenting the drives, try to use the Fix It (MicrosoftFixit.malware.RNP.1343648269423620.1.1.Run, as well as: MicrosoftFixit.ProgramInstallUninstall.RNP.1343648269423620.2.1.Run,
as well as: MicrosoftFixit.wu.FISC.1341772369343897.1.1.Run,   and: MicrosoftFixit50123) all the these would not help.
        I also tried to run what information I received from viewing options from the Error Code 0x80131018 and all the HP Support Assistant and Windows Help and Support. These are some of them; SCUDownloader,
Windows6.1-KB947821-v34-x64,   HPSupportSolutionsFramework-en-11.51.0048,   HPSupportSolutionsFramework-11.51.0048,   HP CoolSense Technology - sp65424,   HP Notebook System BIOS Update (Intel Processors) - sp55068,
HP Power Manager Utility Software - sp55151,   HP On-Screen Display Utility - sp55152,   HP System Diagnostics UEFI - sp52407, and    Intel Rapid Storage Technology Driver - sp55101. All these with running the maintenance,
I also installed Boost, also ran the scans through my Norton Security, and so much more to try and fix this problem, I just can't remember everything that I tried I have been working so hard at solving this problem since of the effect of how this Windows Updater
failing at updating and Troubleshooter not working to leaving me unable to find and fix these issues.
           I am a Graphic Design Artist and I am pretty computer savvy but I am at a loss on this . If anyone has any advise on these issues please help me ASAP, I use my HP everyday and it is important for
me to have it for work purposes, concepts and so much more. My Mother got this computer for me when I graduated from college in 2012 for my graduation gift so I can do what I do.
Thank you so much for your help in trying to get this resolved without having to take it into somewhere and pay $$ that I do not have.

I recently had a similar problem - Windows 7 Ultimate. Apart from updates not installing and troubleshooters not running I started getting crashes and BSOD's
I checked that my Cryptographic services was set to auto (it was)
Press the 'Windows key" and and key "R" together   to launch the RUN box. Type
services.msc in the box and press Enter. It'll open Services Manager.
Scroll down to "Cryptographic Services" in the list. It should be set to Auto ( mine was)
I then checked my Windows updates to see when the problem started
Taking the bull by the horns I deleted the last 20 updates installed.
I restarted the computer and was amazed to find the troubleshooters working ok
I downloaded the Windows updates and installed them 5 at a time checking the troubleshooter after each batch. Everything was ok .
I can only assume the troublesome update was not re-offered or the one that installed itself was corrupt.

Since Mavericks update my iPhone and iPad calendars are NOT syncing with the calendar on my MacBook Pro

Since Mavericks update my iPhone and iPad calendars
are NOT syncing with the calendar on my MacBook Pro.
I used to use iTunes but don't see the options now.
Does anyone know how to set up a sync.?

I have temporarily solved the sync problem by using an older MBAir running snow leopard, I exported
both calendar and contacts and imported them in the MBA and synced normally.
Since I'm not about to send my data on the cloud, or setup a server to just sync my iphone,
I think this is a good workaround ! BTW I stopped updating my contacts and calendar on the MB, I only
update the iphone until a permanent solution is found !
And they better come up with one soon, because I'll just switch to an Android phone and Ubuntu linux for my MBP, Apple should make our lives easier, not harder !
I'm sure Samsung is having a ball ever since the sync issue was made public !
Hopefully Apple is listening and will make things right again !

I just updated my iTunes, and I need to delete photos from my iPod 4, and there is a Photo Library that synced to my iPod when i plugged it into my computer, and now it doesnt have the option to delete them off my iPod. How do I get rid of these photos?

I just updated my iTunes, and I need to delete photos from my iPod 4, and there is a Photo Library that synced to my iPod when i plugged it into my computer, and now it doesnt have the option to delete them off my iPod. How do I get rid of these photos? I have read other questions that say to plug the iPod into the computer and like un-sync it, but I downloaded the new iTunes and it doesnt have a photos tab. Does anyone know how to solve my problem? Please and Thank You, Megan!

Just what did you do to the computer?
It sounds like the iPodf is seening the iTunes libary as a new libary.

My iTunes doesn't keep track of my listening history anymore. It doesn't update play counts and default "Recently Played" playlist.

My iTunes doesn't keep track of my listening history anymore. It doesn't update play counts and default "Recently Played" playlist. But it still tracking plays from my iPhone and syncing them.
I've tried to repair it with setup file. Nothing's changed.
Can you help me with that?
NOTE: Now I tried disabling the crossfade feature and it worked, started to count again. But I like crossfade, I don't want to keep it off.

I think I got this figured out. The playcount does update, but not how the previous iPod models update their playcount. Instead of immediately updating the playcount right after you finish the song like the older iPod models, iPod Touch keeps the updates in memory. The next time you connect to iTunes it'll sync those playcounts in memory to the actual songs itself, effectively updating the playcount of the songs only after connecting to iTunes. I have set my syncing manually. That's why after connecting to iTunes, my playcounts are updated. BUT it doesn't solve the mystery of my Smart Playlist. Even though in iTunes, the correct songs are listed, in the iPod Touch, it shows the old playlist.
Don't you just hate that? It was working fine before on non-iPod touch models. Now we have to live with this new bug. I just hope when they release software 2.0 it fixes these bugs and that they *give it for free!* People shouldn't be charged on something they should have gotten as a support!

TS3212 hi my iphone was updated to IOS6 and now it wont play my music it just scroles through all the titles please help

my iphone was updated with IOS6 and now it wont play any of my music it just svroles through every song and wont stop i turned it off using the twin keys start and turn off but still no help please can some one halp me this apple softwear is crap

Hi alicia243,
Thanks for visiting Apple Support Communities.
If your iPhone wont power on, I recommend going through these steps first:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Best,
Jeremy

IMac G3 won't boot after updating the firmware and upgrading the OS!

Hi! Everyone,
I have an iMac G3 333MHz (five flavors) which comes with 192MB of RAM and 6GB of hard drive. Originally, it was OS 8.5.1 installed, later upgraded to OS 9.2.2. Of course, the firmware has been updated by the appropriate method provided by the on-screen instructions before the installation of 9.2.2. After successfully updating the firmware and installing Mac OS 9.2.2, the system booted up and worked fine. However, after shutting it down and powering it up a few days later, I have encountered a critical problem:
1. At first, the iMac would chime and displayed a smiley-mac finder face.
2. No question mark appeared and the system halted because it stayed at the same screen for about 5 minutes! Also, the keyboard wouldn't respond. For instance, the LED signal light wouldn't light on when Caps Lock was pressed.
3. I assumed that this is just a typical crash and rebooted the machine via the "reset" button on the right side of the machine.
4. After restarting, well, no luck, the same condition. Therefore, I rebooted it again by using the method mentioned above.
5. The condition of sticking at the smiley-mac finder face occurred again! However, this time the iMac wouldn't chime and just displayed the mac face.
6. Another restart, well, it was getting worse... no chime and no smiley-mac finder face but a white screen.
7. I was frustrated then and shut the machine down forcefully by rebooting it again and pressing on the power bottom quickly before the screen appears. Also, I unplugged the power cord.
---------- After a few hours later ----------
8. Okay, I then plugged the power cord in and booted it up again, this time, it would chime but stuck at the white screen. => No smiley-mac finder face appeared!
9. Rebooted it again, the result was as same as step 8.
10. Another restart, the smiley-mac face finally appeared but still... stuck here and this time, no chime.
11. I then shut the machine forcefully by using the method mentioned above and let the machine rest for about a day with the power cord unplugged.
---------- After resting for a day ----------
12. I booted it up and it would chime, but no screen (the power button was orange, not green). I then forcefully shut down the machine.
13. Waited for about a minute and powered it up. This time, I tried to clear the PRAM, but no chime and gave me a white screen. => No luck! As mentioned, the keyboard's LED signal light wouldn't light on even though the Caps Lock key has been pressed.
*Note: The keyboard has been tested on the other computers and it worked. Also, I tried different USB ports to plug the keyboard in. => The USB ports were all in working condition， as I can know from the last successful start up.
14. Forcefully shut the machine down and tried to enter the Open firmware, no luck. It didn't enter and gave my a white screen.
15. Conclusion:
1) After resting for a while, the iMac would chime.
2) Rebooting too much times would cause the machine not to chime and leaded the screen to become white instead of the smiley-mac finder face.
3) However, rebooted the machine when the screen became white, the smiley-mac finder face would appear again without chime.
By the way, I could hear the hard disk spinning up so that means the hard disk is working.
Can anyone help me solve this problem? Is it related to the firmware update? Any suggestions will be appreciated! Thanks!
Andy

OK, I will try replacing the PRAM battery. Also, the PowerMac G3 and the other iMac 233MHz had the dead batteries. They are still working though... Should I replace them along with the iMac 333MHz? In case of not replacing, will they malfunction in future times? There are some symptoms on this two machines: 1. iMac 233MHz - No chime and no sound when adjusting system volume (the bi sound is not available), but iTunes and other applications can still use the audio device and output the sound via internal speakers; 2. PowerMac G3 450MHz - Will chime but sometimes hard to boot: 1) Chime but no screen; 2) No respond after pressing the power button => the power signal light won't light on. Every time I experienced this, I would open its case, pressing a small button (not quite understand what it does... anyway, just works if system halted.) near the PRAM battery and wait for about a minute, then close the case, and it boots. However, I have to reset "Date & Time"...

I've updated my phone and lost my music but I can't seem to sync it back on!!

Please help me!! I've updated my phone and have lost all my music but I can't seem to sync it back on! An error message has popped up asking me if i'd risk losing my apps so I've clicked yes but nothing seems to be happening!!?? Helpp!! i need my music!!!

problem solved! took me three hours some dental floss a tooth pick a fork and a quarter but i fixed it! so relieved!

[solved]Update of x264 and ffmpeg breaks MPD

Similar Messages

Maybe you are looking for