[Solved] Upgrading my current hard drive

Hey guys
I'm having this MSI GE60-2OC which I find slow.
Last time I was seeking some advices on what I should upgrade, and I was adviced to upgrade my current hard drive with a SSD instead. I was recommended to go with a mSATA SSD, which is perfectly fine - however, I got one question.
Would it be a waste to get a mSATA SSD and then replace my current HDD with a SSD?
If so, I'm planning to buy the Samsung SSD 840 EVO mSATA 120GB and a Samsung SSD 840 EVO 250GB.
Is that possible? Would it be overkill?

You'll need at least two mSATA to have RAID 0, so it's not supported on GE60 2OC.
Just stick with the original BIOS you have and there is no additional settings needed in BIOS.
For how to do the OS installation onto the SSD, you can check on the post Svet share before.
http://dragonarmy.msi.com/forum/showthread.php?t=64052&p=101050#post101050
Quote:
"Burn and prepare MSI Recovery DVDs, then:
Disconnect/remove your HDD, and leave the mSata SSD installed only.
Then use the burned recovery DVDs to restore it over the SSD.
Once you can boot your OS from the SSD and restore is complete,
install again your HDD, and adjust boot prioroty 1st boot: SSD"
How to adjust boot prioroty?
1. After seeing MSI logo while booting up, press "Delete" button to enter the BIOS menu.
2. Use keyboard to move to "Boot" tab.
3. Set SSD to the Boot Option #1.
*You need to change the Hard Disk Drive BBS Priorities if you can't find your SSD in the Hard Disk item.

Similar Messages

  • About to upgrade my Macbook hard drive - what steps to ensure TM works?

    I'm about to upgrade my 100Gb hard drive in my Macbook to a 320Gb drive and I was planning to use either Carbon Copy Cloner or SuperDuper to clone my existing drive to my new drive.
    Couple of questions:-
    Will TM continue to work seamlessly or are there some tweaks I will need to do to get it to continue to work.
    With the increase in size of my Macbook drive I probably need to increase the size of my TM drive for backup as well - can I just clone my current TM drive to a larger capacity drive or will there be tweaks required.
    Many thanks
    Mike

    Mike,
    If you have a good Time Machine backup, you can just use that. You would install the new drive, boot to the Leopard install disk, then use the "Restore From a Time Machine Backup" utility. This restores your entire installation from the Time Machine backup of your choosing. Time Machine would then continue with the same backup where it left off.
    Kappy will not agree with this, because he has not had the same success as I with Time Machine. For me, it has worked flawlessly, and I have used the above method several times to go from one machine to another, or to a new drive on the same machine.
    I do recommend that you take a few precautions prior to trusting your Time Machine backup, however. First, I would verify the Time Machine volume with Disk Utility, to make sure there are no disk errors. Then, I would make a final backup and monitor it carefully. Open /Applications/Utilities/Console. In the Sidebar, under "Log Database Queries," select "All Messages." Then type "backupd" into the search field. Finally, choose "Backup Now" from the Time Machine menu.
    Watch the progress of the backup in the Console window, and look for the presence of any potential errors. If nothing seems out of the ordinary, your backup should be safe to use.
    Scott

  • Can you upgrade a MacBookPro hard drive from a "750GB Serial ATA Drive @ 7200 rpm" to a Solid State Drive easily?  The info seems to say that it's as easy as plugging the new drive into a drive slot?

    I am about to buy a new MacBook Pro, but want to try out the Serial Drive 7200rpm before taking the plunge to use the SSD....Can you upgrade a MacBookPro hard drive from a "750GB Serial ATA Drive @ 7200 rpm" to a Solid State Drive easily?  The info seems to say that it's as easy as plugging the new drive into a drive slot?

    shldr2thewheel wrote:
    Fmaharg wrote:
    I am about to buy a new MacBook Pro, but want to try out the Serial Drive 7200rpm before taking the plunge to use the SSD....Can you upgrade a MacBookPro hard drive from a "750GB Serial ATA Drive @ 7200 rpm" to a Solid State Drive easily?
           Yes
    Fmaharg wrote:
    The info seems to say that it's as easy as plugging the new drive into a drive slot?
           It's easy, but not that easy.  You need to copy all the info from the drive currently in the mac to the new  one before you install the new SSD.  You can do          this by downloading cloning software (I use CarbonCopyCloner because it's free)
    Not to be picky but CCC is donationware, if you use it because of its quality you should send a little bit of money in appreciation, and as a bonus you get to turn the banner off.

  • How to upgrade a dv2000 hard drive help.

    I want to swap my hard drive for a new one and am unsure how to do this. I want to upgrade and start fresh and was wondering how I could use my current hard drive without transferring everything just windows and all the hp stuff I would need like drivers. Thank you all for any help you could give me. And yes I know I could just do a system restore but I want to put a fresh drive in. Thanks

    Do you have a set of the HP recovery disks?  Run Imgburn on your disks to verify the surface integrity.  Once that is done then backup your data.
    I upgraded my laptop from 120 to 320 gb using this process.  I brought the same model line and manufacturer as the drive I had installed.  Then I swapped drives and did a HP recovery using the HP recovery disks.  Now you'll be back to a day one factory fresh state.  The only thing left is to reinstall programs and copy your data back.
    If your old drive is still good then you could buy an external enclosure and use it for whatever you like.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • What All Do I Need If I Want To Upgrade My Macbook Hard Drive?

    hey guys.
    i've tried reading up a little but i was hoping someone (or a few people) could give me some straight up answers.
    if i want to upgrade my macbook hard drive what all do i need? just the hard drive? or are there other pieces?
    also.. whats a good 250GB one? i found this one on ebay: http://cgi.ebay.com/NEW-2-5-Western-Digital-250GB-SATA-Harddrive_W0QQitemZ220271 134397QQihZ012QQcategoryZ158853QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
    is that one any good? i just know the name (Western Digital) and have heard good things about them...
    any comments are welcome.
    thanks!
    beau

    I got a 320GB sata 2.5" hard drive and installed it myself, its easy. I also got a caddy so I can use my old 120GB drive as a back up. Make sure u have everything backed up! Seagate and western digital drives are most popular. I asked similar q and got this answer"
    Extended Hard Drive Preparation
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.
    If your backup is bootable, then boot from the external drive and use SuperDuper to clone it back to the newly installed drive.
    Mac Pro 2.66 Ghz; MacBook Pro C2D 2.33 Ghz; MacBook Pro 2.16 Ghz Mac OS X (10.5.4) Intel iMac C2D 17 "; MacBook 2.0 Ghz.
    And
    Now, to install the hard drive, follow http://www.ifixit.com/Guide/Mac/MacBook-Core-Duo/Hard-Drive-Replacement/86/5/

  • I upgraded my imac hard drive to a 2tb drive. how do i use time machine to get my computer back to normal?

    i upgraded my imac hard drive to a 2tb drive. how do i use time machine to get my computer back to normal?

    Thank you. I followed the faq#14 (using setup wizard from the osx install disk). Everything went just as planned until I woke up this morning and noticed there was no progress on the "transferring documents" meter. It stopped about 1/4 of the way. I can hear the computer working and the bar is somewhat animated like it is advancing but it's not.
    Should I cancel and restart or should I wait it out? It already been about 13 hours since I started the process. Do you think it is my time machine or my iMac? Maybe the time machine file is corrupt or something.
    Anyway, any help is appreciated. Thanks.

  • How can i backup my iPod Touch 4g and save my apps onto a new hard drive without having to save onto the current hard drive first?

    How can i backup my iPod Touch 4g and save my apps onto a new hard drive without having to save onto the current hard drive first?
    My current hard drive is filled up and i'm going to buy a new, bigger hard drive. How can i change the save and backup destination for iTunes so i can backup and transfer my purchases(apps) onto the new hard drive? Without having to backup and save my apps onto the current hard drive because there's no space left on it. Thanks!

    have you tried following the steps given here on the apple's knowledge base site may be they can help you
    http://support.apple.com/kb/HT1414
    here is a video from youtube as well
    http://www.youtube.com/watch?v=wH_1qkHkZi0
    also this tutorial
    http://www.imore.com/how-to-setup-backup-restore-update-use-icloud

  • 2011 Macbook Pro - if i upgrade ram and Hard drive will it void my applecare ?

    2011 13" Macbook Pro - if i upgrade ram and Hard drive will it void my 3 years of applecare ?  - Does apple offer this service ?
    Thanks

    However it might be worth reading this article in The Register about Apple not using standard temperature sensing methodology  - see
    http://www.theregister.co.uk/2011/05/14/imac_hard_drive_replacement_woes/http://
    also read the links to OWC comments.

  • How to upgrade my internal hard drive for macbook 5,2 from 160GB to 1TB?

    Hello,
    I wonder if you can please help me out.
    I wonder, is it possible to upgrade my internal hard drive for macbook 5,2 from 160GB to 1TB?
    Thanks,

    There's only one 9.5mm high 1tb drive around http://eshop.macsales.com/item/Samsung/HNM101MBB/
    With a video on replacing the hard drive http://eshop.macsales.com/installvideos/macbook_13_mem_hd/

  • I am using FCPX 10.1.3. and want to duplicate my project, and its complete resources, to a different hard drive.  When I click "duplicate", it automatically duplicates the project in its current hard drive.  How do duplicate to a different hard drive

    I am using FCPX 10.1.3. with Yosemite, and want to duplicate my project and its complete resources to a different hard drive.  When I click "duplicate", it automatically duplicates the project in its current hard drive, unlike the previous FCPX that gave you options. How do duplicate to a different hard drive?

    Since projects are now stored in events and events are stored in libraries, you need to create a new l;bray on that different drive or open an existing library on that drive. Then duplicate your project and move it to the new library. It will copy the media. Then use the Consolidate Project File command to round up any external assets; there may or may not be any.
    Russ

  • My Mavericks upgrade crashed my hard drive and I had to reinstall Mountain Lion.  Now I cannot get any of the apps that I purchased to download.  The icons on the launchpad just say "waiting" no matter what I try.

    My Mavericks upgrade crashed my hard drive and I had to reinstall Mountain Lion.  Now I cannot get any of the apps that I purchased to download.  The icons on the launchpad just say "waiting" no matter what I try.  My app store ID is fine.  What do I do?

    Are you now using a different username from the one you used prior to migrating? If so that is the reason for the problem. You might, then, give this a try:
    To fix Home folder permissions
    Open the Terminal application in the Utilities folder.  At the command line prompt enter or paste the following command line:
    sudo chown -R `id -un`:`id -gn` ~
    Press RETURN.  You will be prompted to enter your admin password which will not be echoed.

  • I upgraded my macbookpro hard drive to 1 TB then migrated my files from time machine. I'm now locked out of the computer because the password is not the same as my usual one and one that was years old and not retreivable. How do I work around this?

    I upgraded my macbookpro hard drive to 1 TB then migrated my files from time machine. I'm now locked out of the computer because the password is not the same as my usual one and one that was years old and not retreivable. How do I work around this?

    Whether or not you are able to recover the data off the drive yourself will depend on if the drive suffered any impact damage in the crash. You can buy USB SATA or IDE adapters (Intel and almost all G5 use SATA) that will let you connect your hard drive to a computer (like a flash drive) to see if you can recover the data. If the drive has suffered physical damage if may not mount.
    If you know someone who has one of these adapters you could try using theirs, otherwise you could buy one but you take the risk of the data on the drive being non recoverable. Regardless, both are much cheaper than $1699!
    (Alternatively, if you know of someone with a Mac Pro or PowerMac G5 they may be able to install the drive in their machine and try to boot from or mount it and copy the data off.)

  • Upgrading my PS4 hard drive

    Hi, I'm looking to upgrade my PS4 hard drive to a 2TB. I am looking for the cheapest deal possible and I was hoping you guys could help me out because I have no idea what type of hard drive will work and what won't. What should I be looking for in a hard drive? 

    Oran_Gina wrote:
    Trust-A-Zombie wrote:
    I upgraded to a 2TB yesterday. Was very worried as don't like doing things to do with changing in console components but when i found out Sony actually made the console and hard drive slot to be changed if you want I went ahead and did it. Bought this. 100% works. Took me 10-15 mins. Got everything installed back. Very simple process. http://www.amazon.co.uk/gp/product/B00I8O6OQ4?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00 Watch this step by step on what to do. https://www.youtube.com/watch?v=NLOSeGlY5oo  Just need USB Stick and a screwdriver. No need to go all technical like a lot of people will. Just buy that product in the link and follow the video. Simple That's all good, but for £20 less you get exactly the same hard drive. You just have to pop it out of a plastic case.  I guess if that's not something someone feels happy to do then by all means buy the stand alone drive.  We did mention it in the first couple of answers   I am in two minds to go for the portable HDD from Argos and crack it open or the M9 2TB from Amazon,it's the warranty I am more concened about.I have had the 1TB M9 installed in my PS3 for a few years and touch wood never had any problems,problem with cracking open the portable HDD it voids the warranty instantly so I am leaning more to the more expensive option.

  • 10.5.6 Upgrade Repeatedly Crashes Hard Drives

    I have been trying to upgrade my MacBook Pro (Fall 08 Model) to 10.5.6 for the past 2 weeks. Each time about 24 hours after the upgrade has completed, applications suddenly stop responding and the hard drive crashes.
    The 1st time, I was running with a 7200 RPM drive that I installed to replace the original 5200 RPM drive that came with the system. This was done on November 1st. It ran 10.5.5 for about a month and a half with no problems. Then, when 10.5.6 was released, I upgraded. A day later, Apps stopped running and as soon as I plugged my iPhone dock into the USB port, the Hard Drive began making clicking sounds and the system stopped responding. Couldn't reboot or even boot from the original DVD because although the drive was not accessible, the system continued trying to access it thus disabling any attempts at booting from other media. After about 20 minutes of holding down the "C" key to boot from my original install DVD, the DVD responded and then took about another 5 minutes before it gained control of the system. Running a Disk Utility or System Profiler from the install DVD reported that there was no hard drive installed (all while the crash clicking sound continues from the drive, that indeed was still physically there).
    2nd, I replaced the 7200 RPM drive with the original one that came with the laptop. Got all of my Data and Apps restored to the current date (December 19th from Nov 1st when I swapped it out with the other drive). At this point, I'm assuming that I just got a bad 7200 RPM drive and arranged to get it replaced. The plan was to keep using my original drive until the replacement arrived. Next, I upgraded my original from 10.5.5 to 10.5.6 on December 22nd and about 24 hours later, I sat my iPhone (Edge model) on top of the palm rest of the laptop, over the disk drive, and the Apps suddenly stopped functioning again. Immediately after this, the disk drive began making clicking sounds and crashed. Again, it took about 20 minutes to get the install DVD up to determine that Disk Utility and System Profiler again reported that no hard drive was installed.
    3rd, I took the laptop to the Genius Bar at my local Apple Store, explained the 2 crash incidents and that I believed something in 10.5.6 and/or my iPhone in close proximity with a 10.5.6 system was causing this. They did some tests, couldn't figure out why both drives didn't work, and didn't buy the iPhone/10.5.6 theory. However, they gave me a BRAND NEW MACBOOK PRO (same make, model, specs). After I got this one home, with a fresh untainted copy of 10.5.5 on it, I upgraded to 10.5.6 on Christmas Eve. Today, 24 hours later, the drive crashed AGAIN just after I placed the iPhone next to the new laptop, as I was preparing to load my data from backup and sync my iPhone. This time, the crash occurred BEFORE I had any of my original Apps or Data installed - so this rules out an existing environment conflict of some kind as being the cause.
    The 3rd drive failure had same symptoms as the other 2 times I upgraded:
    * Sudden freeze of most/all Apps
    * Spinning Beach Ball when attempting simple tasks like opening System Preferences, Finder windows, etc.
    * After Power-cycling (because all control had been lost), system cannot boot from hard drive
    * Attempts to restart from original DVD takes about 30 minutes
    * Disk Utility & System Profiler Cant' find hard drive
    I will be taking this system back to the Apple Store on Saturday (because Genius Bar is closed on Friday, 12/26/08) to have it replaced again. WILL NOT BE UPGRADING to 10.5.6 until Apple addresses this problem.
    Are there others out there who have had similar Hard Drive crashes? I've read posts about the Apps freezing and the need for some to do Archive/Install again after a 10.5.6 upgrade. However, I am unable to determine if any are experiencing the drive crash issue. If so, are you using the newer MacBook Pros or is this problem occurring on other hardware types? Are you using MacBooks with iPhones (even though I find it hard to believe the original iPhone could somehow be emitting something that's causing 10.5.6 to crash a hard drive; this iPhone worked OK under 10.5.5 with same hardware) I have 3 other Mac Models in my home but am now leery of upgrading to 10.5.6 on any of them...

    Hello! It seems I have a similar problem. I upgraded to 10.5.6 a few days ago. Today morning, after turning the computer on from sleep, everything was working perfectly, however after few minutes while I was browsing the Internet with FireFox my hard drive started making "click - click" sound repeatedly, disabling me to do anything with my computer (the colorful spinning wheel appeared; it happened the exact same time when I clicked on a link in a news website). After powering off with holding the power button, I wasn't able any more to log in. I've managed to boot the Installation DVD and DIsk Utility found no hard drive.
    After exchanging my hard drive (the old one is definitely broken - I was trying to use an external slot to try accessing it - unsuccessfully) I cannot any more boot the installation DVD. The DVD drive was relatively new, so it shouldn't cause any problems. The DVDs are also fine (no scratches, tried a couple of installation discs...). Holding "C" key for 30 minutes doesn't seem to work either... I only get the grey screen, with nothing on it...
    At the moment I'm stuck, because I have the MacBook with grey screen and fans running at the full speed, which does not seem to read DVDs, though I can reset the PROM, as well as, boot it as a target and force-quit the disk with holding F12...
    The worst thing is that I lost my data created over the last week... I hope apple will recognize that something is wrong with their update... If I get the bootable DVD to boot finally, I will write an update.
    Greetings to everyone with the same problem.
    Chris

  • Upgrading Macbook Air hard drive and upgrading Snow Leopard to Mountain Lion at same time

    I have a 2011 Macbook Air 3,2 running Snow Leopard (10.6.8).  My 128GB SSD hard drive is completely full, and I have ordered an upgrade from OWC which also comes with an optional external enclosure.  I would like to do a clean install (to "upgrade") to Mountain Lion on the new drive.  Can anyone confirm if the following sequence will work?
    1.  Purchase Mountain Lion on App Store and download to an SD card
    2.  Connect my new OWC SSD as an external drive
    3.  Do a clean install of Mountain Lion from the SD card to my new external SSD
    4.  Boot from the external SSD
    5.  Use Migration Assistant to move everything from my in-system old SSD to the new (currently external) SSD
    6.  Shut down
    7.  Physically swap the SSD drives
    8.  Boot from the newly-installed larger internal SSD
    9.  Done?
    Is it that simple or am I missing some major step?  In particular, are there any complications with step 3 above?
    Thanks for your help!

    Carl,
    The SD card can be used as a boot drive, if you manage to restore the image to the drive.. I tried to use an SD card in the built-in card reader, and for whatever reason could not get Disk Utility to restore the InstallESD.dmg image to the SD card directly when done throught the Air's reader. I had to use an SD card that had a built-in USB tab, and use USB. I did not try using an external SD adapter to the USB port to see if that would work.
    Remember, you don't open the package by double clicking the installer, you Right-click (or Control+click) the installer, and choose Show Package Contents from the resulting contextual menu. In the folder that appears, open Contents, then open Shared Support; you’ll see a disk-image file called InstallESD.dmg.
    Launch Disk Utility (in /Applications/Utilities). Drag the InstallESD.dmg disk image into Disk Utility’s left-hand sidebar to the flash drive you want to restore the image to.
    I would copy the downloaded installer to a safe location, so if you ever need it again.

Maybe you are looking for