[SOLVED] URxvt doesn't allow tabs to be opened as regular user

I recently had my file system become corrupted as was forced to restore 2 week old backup, after configuring the backup and booting into the system I fired up urxvt opened journalctl -f. When I tried to open a new tab I got this error:
Jan 05 01:49:07 thinkpad slim[431]: urxvt: can't fork, aborting.
Jan 05 01:49:07 thinkpad slim[431]: urxvt: error while initializing new terminal instance at /usr/lib/urxvt/urxvt.pm line 1125.
One thing I have noticed is if I make the window larger I can sometimes get 2 tabs before the error shows, if I make it fullscreen I get 1 tab and if I leave it unchanged I can get 3 tabs. If I su - and fire it up I can get tabs to my hearts content.
Figuring this was an issue specific to my user I created a new user and have the same issue.
x86_64
3.7.1-3-ck
fluxbox
My .Xdefaults
urxvt.geometry:90x25
urxvt.scrollBar: false
urxvt.saveLines: 10000000000000000
urxvt.foreground: white
urxvt*termName: rxvt-256color
urxvt*transparent: true
urxvt.depth: 32
urxvt.font: 7x14
urxvt.background: [85]#000000
urxvt.perl-ext-common: default,tabbed,matcher
urxvt.url-launcher: /usr/bin/chromium
urxvt.matcher.button: 1
The system is 100% up to date as of this posting.
Last edited by gehidore (2013-01-06 18:23:28)

xamaco wrote:Starting with urxvt 9.16, several change have happened. Among other things :
perl-ext-common has been replaced by perl-ext
url-launcher replaced by urxvt-url-launcher
See man urxvt-extensions and http://dist.schmorp.de/rxvt-unicode/Changes
Looking at the latter I see this:
- INCOMPATIBLE CHANGE: renamed urlLauncher resource to url-launcher.
- fix processing of DEC private mode save sequences (patch by Patrick
Hemmer).
Which doesn't seem to apply to my issue, and is a change from "urlLauncher to url-launcher" which I already use, and already works.
I have changed the perl-ext-common to perl-ext Nothing has changed.
Again the strange part about this for me is that opening a root rxvt window from su - tabs function 100% fine.

Similar Messages

[SOLVED] urxvt doesn't display correctly some special characters

Hello everyone,
I have a weird issue with urxvt. For some reason it doesn't display correctly some special character.
Here is a comparison between xfce4-terminal and rxvt-unicode (I used theses characters as exemple):
xfce4-terminal :
urxvt :
And here is my .XDefaults file (without the color and the plugin part, since it's unrelevant):
!Font
URxvt.font: xft:PragmataPro:pixelsize=11:antialias=false
!General
URxvt.scrollBar: false
URxvt*imLocale: fr_CH.UTF-8
URxvt.saveLines: 5000
URxvt.geometry: 95x26+50+50
Has someone an idea what the problem could be?
Thank's in advance.
Last edited by mwm (2013-11-13 13:15:48)

This is what I think is happpening.
PragmataPro may not contain those glyphs. It appears to have a wide array of glyphs but it is not unicode complete.
Xfce-terminal is a vte terminal. When a glyph cannot be found in the desired font, it will find the glyph in the 'closest' font. Urxvt will only use the glyphs in the font or fonts specified. If PragmataPro does not contain the glyphs, urxvt will display boxes.
You can give urxvt a series of fonts to search. It will search for a glyph through the listed fonts in the order you specify. Here's an example from my urxvt configs:
urxvt*font: xft:DejaVu Sans Mono:style=Book:antialias=false:size=8, \
xft:WenQuanYi Bitmap Song:size=8, \
xft:FreeSerif:style=Regular, \
xft:unifont:style=Medium:antialias=false
I couldn't use FreeSerif or unifont as a main font, but for an occasional glyph, it works for me. This file, http://www.cl.cam.ac.uk/~mgk25/ucs/exam … 8-demo.txt, can be displayed in urxvt correctly, with only a few unknow glyphs showing as boxes in the Amharic section.

[SOLVED] Iptables doesn't allow pacman -S(y) anymore...

Hi there,
First of all, sorry for my english .
I've just configured my firewall, but now i can't get pacman working great. Nowatime I can't synchronise, and i can't install anything. So, I think that pacman use port number 80, but iam not sure. I did make some searches but could not find anything on the port used.
So here are my rules :
#!/bin/sh
# Flush and delete all rules
sudo iptables -F
sudo iptables -X
sudo iptables -t nat -F
# Keep connections open
iptables -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT
iptables -A OUTPUT -m state --state RELATED,ESTABLISHED -j ACCEPT
##INPUT
# Allow ssh
iptables -A INPUT -p tcp --dport 22 -j ACCEPT
# Allow ping
#iptables -A INPUT -p icmp -j ACCEPT
# Allow HTTP
iptables -A INPUT -p tcp --dport 80 -j ACCEPT
iptables -A INPUT -p tcp --dport 443 -j ACCEPT
# Allow SMTP & POP
iptables -A INPUT -p tcp --dport 25 -j ACCEPT
iptables -A INPUT -p tcp --dport 993 -j ACCEPT
# Allow NNTPS
iptables -A INPUT -p tcp --dport 563 -j ACCEPT
# Allow JABBER
#iptables -A INPUT -p tcp --dport 5222 -j ACCEPT
#iptables -A INPUT -p tcp --dport 8000 -j ACCEPT
#iptables -A INPUT -p udp --dport 8000 -j ACCEPT
#iptables -A INPUT -p tcp --dport 21 -j ACCEPT
##Default rules
# Block all INPUT & FORWARD
iptables -P INPUT DROP
iptables -P FORWARD DROP
# block all OUTPUT
iptables -P OUTPUT DROP
##LOOPBACK
# Allow loopback
iptables -A INPUT -i lo -j ACCEPT
iptables -A OUTPUT -o lo -j ACCEPT
##OUTPUT
# Allow FTP, DNS, HTTP, HTTPS
iptables -A OUTPUT -p tcp --dport 20 -j ACCEPT
iptables -A OUTPUT -p tcp --dport 21 -j ACCEPT
iptables -A OUTPUT -p tcp --dport 53 -j ACCEPT
iptables -A OUTPUT -p udp --dport 53 -j ACCEPT
iptables -A OUTPUT -p tcp --dport 80 -j ACCEPT
iptables -A OUTPUT -p tcp --dport 443 -j ACCEPT
iptables -A OUTPUT -p tcp --dport 563 -j ACCEPT
# Allow SMTP, POP & IMAP
iptables -A OUTPUT -p tcp --dport 25 -j ACCEPT
iptables -A OUTPUT -p tcp --dport 110 -j ACCEPT
iptables -A OUTPUT -p tcp --dport 143 -j ACCEPT
# Allow NTP
iptables -A OUTPUT -p tcp --dport 123 -j ACCEPT
iptables -A OUTPUT -p udp --dport 123 -j ACCEPT
# Allow SSH
iptables -A OUTPUT -p tcp --dport 22 -j ACCEPT
iptables -A OUTPUT -p udp --dport 22 -j ACCEPT
# Allow WHOIS
iptables -A OUTPUT -p tcp --dport 43 -j ACCEPT
# Allow USENET
#iptables -A OUTPUT -p tcp --dport 119 -j ACCEPT
#iptables -A OUTPUT -p tcp --dport 8000 -j ACCEPT
#iptables -A OUTPUT -p udp --dport 8000 -j ACCEPT
Can you help me get it working great please?
Thanks a lot friends
Last edited by madnerves (2009-05-06 08:41:18)

We need to know whether you're syncing to a HTTP or an FTP mirror too... I suppose FTP.
Make sure you have the ip_conntrack_ftp module loaded (kernel module, that is). Restart the firewall, and if you have all the right ports allowed, it should work fine.

Firefoc doesn't allow my hotmail to open

I can see my email listed in hotmail, but cannot open any of my email. I called my internet provider and they suggest opening it with MS Explorer. Email does open with Explorer.
== This happened ==
Every time Firefox opened
== When I was prompted to update hotmail.

If the lid doesn't close all the way, the MacBook Pro won't go to sleep. So, yes, the case could be the cause.

Can't open Firefox. When I try to open, a window pops saying "Close Firefox" and "A copy of Firefox is already open. Only one copy of Firefox can be open at a time.", and doesn't allow the application to open.

Came home to find computer restarted, which I assume is an automatic Firefox update.
When I try to open Firefox, window pops up saying "Close Firefox" and, "A copy of Firefox is already open. Only one copy of Firefox can be open at a time."
I'm unable to open the program at this time, lots of critical work info stored there - please help. Thx.
Neal

See "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
*https://support.mozilla.com/kb/Firefox+hangs

Firefox did an automatic update to 6.01, and now my middle mouse button is not working in the browser. It doesn't close tabs, it doesn't open new tabs by middle clicking a link, it doesn't allow me to middle click to scroll the page...

Firefox did an automatic update to 6.01, and now my middle mouse button is not working in the browser. It doesn't close tabs, it doesn't open new tabs by middle clicking a link, it doesn't allow me to middle click to scroll the page..

[BUG FIXED, see "EDIT 2" at the end of my post]
I'm on Firefox 3.6.21, and I got this problem today after a Greasemonkey update (To version 0.9.10, apparently).
Disabling Greasemonkey solved the problem, and re-enabling it reproduced the problem (middle-clicking links to open in new tab did not work, merely highlighted the link).
I should also note that while Greasemonkey was enabled and the bug was affecting me, Ctrl+Click to open links in new tabs was also broken.
I hope this helps!
EDIT: It appears this is a known incompatibility/conflict bug between current versions of Greasemonkey and Tab Mix Plus. Read more here:
https://github.com/greasemonkey/greasemonkey/issues/1406
EDIT 2: GREASEMONKEY HAS NOW BEEN UPDATED with a workaround to fix the problem. Go to https://addons.mozilla.org/en-US/firefox/addon/greasemonkey/versions/ to install the update manually. It hasn't been reviewed by Mozilla yet, so it won't be an automatic update for another day or two. All credit to "cannonfodder" below for noticing this; please mark his post as helpful!

Every time I open, all my previous tabs come up. I can not stop this and the place to check doesn't allow it. How do I stop them, it is annoying.

I start a session and all the previous tabs come up, like I want to restore, but I don't want to restore. I tried deleting history, etc--didn't work- they still came up-tried the setting in tools-options nothing changed

It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the sessionstore.js [2] file and possible sessionstore-##.js [3] files with a number and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
See also:
* [1] http://kb.mozillazine.org/Session_Restore
* [2] http://kb.mozillazine.org/sessionstore.js
* [3] http://kb.mozillazine.org/Multiple_profile_files_created
* Firefox/Tools > Options > General > Startup: "When Firefox Starts"

[SOLVED] urxvt colors and moc theme

Hello!
I am a KDE user and usually i am using Konsole. For some applications (like htop and moc) i use urxvt (patched version from AUR). The problem is in colors. When i launch moc in Konsole the theme colours are right but not in urxvt too. That happens with htop also. URxvt doesn't follow theme backrground color (uses its own) and foreground colors too.
Here is my .Xresource file:
! urxvt
! URxvt*termName: string
!URxvt*geometry: 80x40
! URxvt*chdir: string
! URxvt*reverseVideo: boolean
! URxvt*loginShell: boolean
! URxvt*jumpScroll: boolean
! URxvt*skipScroll: boolean
! URxvt*pastableTabs: boolean
! URxvt*scrollstyle: mode
URxvt*scrollBar: false
! URxvt*scrollBar_right: boolean
! URxvt*scrollBar_floating: boolean
! URxvt*scrollBar_align: mode
!URxvt*thickness: 20
! URxvt*scrollTtyOutput: boolean
! URxvt*scrollTtyKeypress: boolean
! URxvt*scrollWithBuffer: boolean
! URxvt*inheritPixmap: boolean
! URxvt*transparent: boolean
! URxvt*tintColor: color
! URxvt*shading: number
! URxvt*blurRadius: HxV
! URxvt*fading: number
! URxvt*fadeColor: color
! URxvt*utmpInhibit: boolean
! URxvt*urgentOnBell: boolean
! URxvt*visualBell: boolean
! URxvt*mapAlert: boolean
! URxvt*meta8: boolean
! URxvt*mouseWheelScrollPage: boolean
! URxvt*tripleclickwords: boolean
! URxvt*insecure: boolean
! URxvt*cursorUnderline: boolean
! URxvt*cursorBlink: true
! URxvt*pointerBlank: boolean
URxvt*background: #171717
URxvt*foreground: #B2B2B2
URxvt*color0: #171717
URxvt*color1: #3D3D3D
URxvt*color2: #ffffff
! URxvt*color3: color
! URxvt*color4: color
! URxvt*color5: color
! URxvt*color6: color
! URxvt*color7: color
! URxvt*color8: color
! URxvt*color9: color
! URxvt*color10: color
! URxvt*color11: color
! URxvt*color12: color
! URxvt*color13: color
! URxvt*color14: color
! URxvt*color15: color
! URxvt*colorBD: color
! URxvt*colorIT: color
! URxvt*colorUL: color
! URxvt*colorRV: color
! URxvt*underlineColor: color
! URxvt*scrollColor: color
! URxvt*troughColor: color
! URxvt*highlightColor: color
! URxvt*highlightTextColor: color
! URxvt*cursorColor: color
! URxvt*cursorColor2: color
! URxvt*pointerColor: color
! URxvt*pointerColor2: color
URxvt*borderColor: #171717
URxvt.font: xft:Ubuntu Mono:size=11
!URxvt*iconFile: /usr/share/icons/oxygen/128x128/apps/utilities-terminal.png
! URxvt*boldFont: fontname
! URxvt*italicFont: fontname
! URxvt*boldItalicFont: fontname
! URxvt*intensityStyles: boolean
! URxvt*inputMethod: name
! URxvt*preeditType: style
! URxvt*imLocale: string
! URxvt*imFont: fontname
! URxvt*title: string
! URxvt*iconName: string
! URxvt*saveLines: number
! URxvt*buffered: boolean
URxvt*depth: 32
! URxvt*visual: number
! URxvt*transient-for: windowid
! URxvt*override-redirect: boolean
! URxvt*hold: boolean
! URxvt*externalBorder: 20
! URxvt*internalBorder: 7
! URxvt*borderLess: true
! URxvt*lineSpace: number
! URxvt*letterSpace: number
! URxvt*skipBuiltinGlyphs: true
! URxvt*pointerBlankDelay: number
! URxvt*backspacekey: string
! URxvt*deletekey: string
! URxvt*print-pipe: string
! URxvt*modifier: modifier
! URxvt*cutchars: string
! URxvt*answerbackString: string
! URxvt*secondaryScreen: boolean
!URxvt*secondaryScroll: boolean
! URxvt*perl-lib: string
! URxvt*perl-eval: perl-eval
! URxvt*perl-ext-common: tabbed
! URxvt*perl-ext: string
! URxvt*iso14755: boolean
! URxvt*iso14755_52: boolean
! URxvt*xrm: string
! URxvt*keysym.sym: keysym
! URxvt*background.border: true
! URxvt*background.expr: string
! URxvt*background.interval: seconds
! URxvt*bell-command: string
! URxvt*matcher.button: string
! URxvt*matcher.launcher: string
! URxvt*matcher.launcher.*: string
! URxvt*matcher.pattern.*: string
! URxvt*matcher.rend.*: string
! URxvt*remote-clipboard.fetch: string
! URxvt*remote-clipboard.store: string
! URxvt*searchable-scrollback: string
! URxvt*selection-autotransform.*: string
! URxvt*selection-pastebin.cmd: string
! URxvt*selection-pastebin.url: string
! URxvt*selection.pattern-0: string
! URxvt*tab-bg: 1
! URxvt*tab-fg: 2
! URxvt*tabbar-bg: 0
! URxvt*tabbar-fg: colour
! URxvt*url-launcher: string
Moc config file:
# This is a configuration file for the MOC player. It should be named
# 'config' and placed in the ~/.moc directory. As this file can specify
# commands which invoke other applications, MOC will refuse to start if it
# is not owned by either root or the current user, or if it is writable by
# anyone other than its owner. All options are given with their default
# values, and therefore commented.
# Comments begin with '#'.
# You can use quotes and escape ('\') in parameters.
# You can have variable values substituted by enclosing the variable name
# as "${...}". (This only applies to the portion of the option following
# the ' ='.) Variables are substituted first from the environment then,
# if not found, from the configuration options. (Note that the value of
# a configuration option substituted is that which it has at the time the
# substitution variable is encountered.) If there is a naming conflict
# between an environment and configuration variable, you may be able to
# resolve it by using lowercase as the environment variable matches are
# case-sensitive whereas the configuration variables are not.
# You can also use the form "${...:-...}" where the value in the second
# position will be substituted if the variable name given in the first
# position is unset or null.
# So, for example:
# MusicDir = /music/${USER:-public}
# Fastdir1 = ${MusicDir}/mp3/rock
# Fastdir2 = ${MusicDir}/mp3/electronic
# Fastdir3 = ${MusicDir}/mp3/rap
# Fastdir4 = ${MusicDir}/mp3/etc
# Variable names are limited to those accepted by the BASH shell; that
# is, those comprising the upper- and lowercase ASCII characters, digits
# and the underscore.
# If you need to use the "${" sequence for any other purpose, write "$${"
# and it will be replaced by "${" and not treated as a substitution.
# Some options take lists of strings as their values. The strings are
# separated by colons. Additional strings can be appended to the list
# using "+ =" in place of a plain "=" to assign the value. For an example,
# see the XTerms option.
# You can override any configuration option when you run MOC using the
# '-O' command line option:
# mocp -O AutoNext =no -O messagelingertime=1 -O XTerms+=xxt:xwt
# This command line option can be repeated as many times as needed and
# the configuration option name is not case sensitive. (Note that MOC
# does not perform variable substitution on the value of such overridden
# configuration options.) Most option values are set before the
# configuration file is processed (which allows the new values to be
# picked up by substitutions), however list-valued options are overridden
# afterwards (which gives the choice of whether the configured values are
# replaced or added to).
# Remember that the client and server are separate processes and the
# server will retain the configuration values formed from the environment
# within which it was originally started.
# Show file titles (title, author, album) instead of file names?
#ReadTags = yes
# In which directory do you store your music files? If you specify it
# you will be able to jump straight to this directory with the '-m'
# parameter or the 'm' command. This can also point to a playlist.
# Example: MusicDir = "/home/joe/music"
#MusicDir = "My folder"
# Start in the music directory by default? If set to 'no', start
# in the current directory by default. A single directory on
# the command line takes precedence.
#StartInMusicDir = no
# How to sort? FileName is the option's only value for now.
#Sort = FileName
# Show errors in the streams (for example, broken frames in MP3 files)?
#ShowStreamErrors = no
# Ignore CRC errors in MP3 files? Most players do that, so the default
# value is 'yes'.
#MP3IgnoreCRCErrors = yes
# Set playback toggles.
#Repeat = no
#Shuffle = no
#AutoNext = yes
# Default FormatString:
# %n - Track number
# %a - Artist
# %A - Album
# %t - Title
# %(X:TRUE:FALSE) - Ternary expression: if X exists, do TRUE,
# otherwise FALSE. The escape character must
# be doubled (i.e., '\\'). (See zshmisc
# documentation for more information.)
#FormatString = "%(n:%n :)%(a:%a - :)%(t:%t:)%(A: $%A$:)"
# Input and output buffer sizes (in kilobytes).
#InputBuffer = 512 # Minimum value is 32KB
#OutputBuffer = 512 # Minimum value is 128KB
# How much to fill the input buffer before playing (in kilobytes)?
# This can't be greater than the value of InputBuffer. While this has
# a positive effect for network streams, it also causes the broadcast
# audio to be delayed.
#Prebuffering = 64
# Use this HTTP proxy server for internet streams. If not set, the
# environment variables http_proxy and ALL_PROXY will be used if present.
# Format: HTTPProxy = PROXY_NAME:PORT
#HTTPProxy =
# Sound driver - OSS, ALSA, JACK, SNDIO (on OpenBSD) or null (only for
# debugging). You can enter more than one driver as a colon-separated
# list. The first working driver will be used.
#SoundDriver = JACK:ALSA:OSS
# Jack output settings.
#JackClientName = "moc"
#JackStartServer = no
#JackOutLeft = "system:playback_1"
#JackOutRight = "system:playback_2"
# OSS output settings.
#OSSDevice = /dev/dsp
#OSSMixerDevice = /dev/mixer
#OSSMixerChannel1 = pcm # 'pcm', 'master' or 'speaker'
#OSSMixerChannel2 = master # 'pcm', 'master' or 'speaker'
# ALSA output settings.
#ALSADevice = default
#ALSAMixer1 = PCM
#ALSAMixer2 = Master
# Save software mixer state?
# If enabled, a file 'softmixer' will be created in '~/.moc/' storing the
# mixersetting set when the server is shut down.
# Note that there is a "hidden" 'Amplification' setting in that file.
# Amplification (0-200) is used to scale the mixer setting (0-100). This
# results in a higher signal amplitude but may also produce clipping.
#Softmixer_SaveState = yes
# Save equalizer state?
# If enabled, a file 'equalizer' will be created in '~/.moc/' storing the
# equalizer settings when the server is shut down.
# Note that there is a "hidden" 'Mixin' setting in that file.
# Mixin (0.0-1.0) is used to determine how much of the original signal is
# used after equalizing. 0 means to only use the equalized sound, while 1
# effectively disabled the mixer. The default is 0.25.
#Equalizer_SaveState = yes
# Show files with dot at the beginning?
#ShowHiddenFiles = no
# Hide file name extensions?
#HideFileExtension = no
# Show file format in menu?
#ShowFormat = yes
# Show file time in menu? Possible values: 'yes', 'no' and 'IfAvailable'
# (meaning show the time only when it is already known, which often works
# faster).
#ShowTime = IfAvailable
# Show time played as a percentage in the time progress bar.
#ShowTimePercent = no
# Values of the TERM environment variable which are deemed to be xterms.
#XTerms = xterm
#XTerms + = xterm-colour:xterm-color
#XTerms + = xterm-256colour:xterm-256color
#XTerms + = rxvt:rxvt-unicode
#XTerms + = rxvt-unicode-256colour:rxvt-unicode-256color
#XTerms + = eterm
# Theme file to use. This can be absolute path or relative to
# /usr/share/moc/themes/ (depends on installation prefix) or
# ~/.moc/themes/ .
# Example: Theme = laras_theme
Theme = yellow_red_theme
# The theme used when running on an xterm.
# Example: XTermTheme = transparent-background
#XTermTheme = yellow_red_theme
# Should MOC try to autoload the default lyrics file for an audio? (The
# default lyrics file is a text file with the same file name as the audio
# file name with any trailing "extension" removed.)
#AutoLoadLyrics = yes
# MOC directory (where pid file, socket and state files are stored).
# You can use ~ at the beginning.
#MOCDir = ~/.moc
# Use mmap() to read files. mmap() is much slower on NFS.
#UseMMap = no
# Use MIME to identify audio files. This can make for slower loading
# of playlists but is more accurate than using "extensions".
#UseMimeMagic = no
# Assume this encoding for ID3 version 1/1.1 tags (MP3 files). Unlike
# ID3v2, UTF-8 is not used here and MOC can't guess how tags are encoded.
# Another solution is using librcc (see the next option). This option is
# ignored if UseRCC is set to 'yes'.
#ID3v1TagsEncoding = WINDOWS-1250
# Use librcc to fix ID3 version 1/1.1 tags encoding.
#UseRCC = yes
# Use librcc to filenames and directory names encoding.
#UseRCCForFilesystem = yes
# When this option is set the player assumes that if the encoding of
# ID3v2 is set to ISO-8859-1 then the ID3v1TagsEncoding is actually
# that and applies appropriate conversion.
#EnforceTagsEncoding = no
# Enable the conversion of filenames from the local encoding to UTF-8.
#FileNamesIconv = no
# Enable the conversion of the xterm title from UTF-8 to the local encoding.
#NonUTFXterm = no
# Remember the playlist after exit?
SavePlaylist = yes
# When using more than one client (interface) at a time, do they share
# the playlist?
#SyncPlaylist = yes
# Choose a keymap file (relative to '~/.moc/' or using an absolute path).
# An annotated example keymap file is included ('keymap.example').
# Example: Keymap = my_keymap
#Keymap =
# Use ASCII rather than graphic characters for drawing lines. This
# helps on some terminals.
#ASCIILines = no
# FastDirs, these allow you to jump directly to a directory, the key
# bindings are in the keymap file.
# Examples: Fastdir1 = /mp3/rock
# Fastdir2 = /mp3/electronic
# Fastdir3 = /mp3/rap
# Fastdir4 = /mp3/etc
#Fastdir1 =
#Fastdir2 =
#Fastdir3 =
#Fastdir4 =
#Fastdir5 =
#Fastdir6 =
#Fastdir7 =
#Fastdir8 =
#Fastdir9 =
#Fastdir10 =
# How fast to seek (in number of seconds per keystroke). The first
# option is for normal seek and the second for silent seek.
#SeekTime = 1
#SilentSeekTime = 5
# PreferredDecoders allows you to specify which decoder should be used
# for any given audio format. It is a colon-separated list in which
# each entry is of the general form 'code(decoders)', where 'code'
# identifies the audio format and 'decoders' is a comma-separated list
# of decoders in order of preference.
# The audio format identifier may be either a filename extension or a
# MIME media type. If the latter, the format is 'type/subtype' (e.g.,
# 'audio/flac'). Because different systems may give different MIME
# media types, any 'x-' prefix of the subtype is ignored both here and
# in the actual file MIME type (so all combinations of 'audio/flac' and
# 'audio/x-flac' match each other).
# For Internet streams the matching is done on MIME media type and on
# actual content. For files the matches are made on MIME media type
# (if the 'UseMimeMagic' option is set) and on filename extension. The
# MIME media type of a file is not determined until the first entry for
# MIME is encountered in the list.
# The matching is done in the order of appearance in the list with any
# entries added from the command line being matched before those listed
# here. Therefore, if you place all filename extension entries before
# all MIME entries you will speed up MOC's processing of directories
# (which could be significant for remote file systems).
# The decoder list may be empty, in which case no decoders will be used
# for files (and files with that audio format ignored) while Internet
# streams will be assessed on the actual content. Any decoder position
# may contain an asterisk, in which case any decoder not otherwise listed
# which can handle the audio format will be used. It is not an error to
# list the same decoder twice, but neither does it make sense to do so.
# If you have a mix of audio and non-audio files in your directories, you
# may wish to include entries at top of the list which ignore non-audio
# files by extension.
# In summary, the PreferredDecoders option provides fine control over the
# type of matching which is performed (filename extension, MIME media
# type and streamed media content) and which decoder(s) (if any) are used
# based on the option's list entries and their ordering.
# Examples: aac(aac,ffmpeg) first try FAAD2 for AACs then FFmpeg
# mp3() ignore MP3 files
# wav(*,sndfile) use sndfile for WAV as a last resort
# ogg(vorbis,*):flac(flac,*) try Xiph decoders first
# ogg():audio/ogg() ignore OGG files, and
# force Internet selection by content
# gz():html() ignore some non-audio files
# Any unspecified audio formats default to trying all decoders.
# Any unknown (or misspelt) drivers are ignored.
# All names are case insensitive.
# The default setting reflects the historical situation modified by
# the experience of users.
#PreferredDecoders = aac(aac,ffmpeg):m4a(ffmpeg)
#PreferredDecoders += mpc(musepack,*,ffmpeg):mpc8(musepack,*,ffmpeg)
#PreferredDecoders += sid(sidplay2):mus(sidplay2)
#PreferredDecoders += wav(sndfile,*,ffmpeg)
#PreferredDecoders += wv(wavpack,*,ffmpeg)
#PreferredDecoders += audio/aac(aac):audio/aacp(aac):audio/m4a(ffmpeg)
#PreferredDecoders += audio/wav(sndfile,*)
# The following PreferredDecoders attempt to handle the ambiguity surrounding
# container types such as OGG for files. The first two entries will force
# a local file to the correct decoder (assuming the .ogg file contains Vorbis
# audio), while the MIME media types will cause Internet audio streams to
# be assessed on content (which may be either Vorbis or Speex).
#PreferredDecoders += ogg(vorbis,ffmpeg):oga(vorbis,ffmpeg):ogv(ffmpeg)
#PreferredDecoders += opus(opus,ffmpeg)
#PreferredDecoders += spx(speex)
#PreferredDecoders += application/ogg(vorbis):audio/ogg(vorbis)
# Which resampling method to use. There are a few methods of resampling
# sound supported by libresamplerate. The default is 'Linear') which is
# also the fastest. A better description can be found at:
# http://www.mega-nerd.com/libsamplerate/api_misc.html#Converters
# but briefly, the following methods are based on bandlimited interpolation
# and are higher quality, but also slower:
# SincBestQuality - really slow (I know you probably have an xx GHz
# processor, but it's still not enough to not see
# this in the top output :) The worst case
# Signal-to-Noise Ratio is 97dB.
# SincMediumQuality - much faster.
# SincFastest - the fastest bandlimited interpolation.
# And these are lower quality, but much faster methods:
# ZeroOrderHold - really poor quality, but it's really fast.
# Linear - a bit better and a bit slower.
#ResampleMethod = Linear
# Always use this sample rate (in Hz) when opening the audio device (and
# resample the sound if necessary). When set to 0 the device is opened
# with the file's rate.
#ForceSampleRate = 0
# By default, even if the sound card reports that it can output 24bit samples
# MOC converts 24bit PCM to 16bit. Setting this option to 'yes' allows MOC
# to use 24bit output. (The MP3 decoder, for example, uses this format.)
# This is disabled by default because there were reports that it prevents
# MP3 files from playing on some soundcards.
#Allow24bitOutput = no
# Use realtime priority for output buffer thread. This will prevent gaps
# while playing even with heavy load. The user who runs MOC must have
# permissions to set such a priority. This could be dangerous, because it
# is possible that a bug in MOC will freeze your computer.
#UseRealtimePriority = no
# The number of audio files for which MOC will cache tags. When this limit
# is reached, file tags are discarded on a least recently used basis (with
# one second resolution). You can disable the cache by giving it a size of
# zero. Note that if you decrease the cache size below the number of items
# currently in the cache, the number will not decrease immediately (if at
# all).
#TagsCacheSize = 256
# Number items in the playlist.
#PlaylistNumbering = yes
# Main window layouts can be configured. You can change the position and
# size of the menus (directory and playlist). You have three layouts and
# can switch between then using the 'l' key (standard mapping). By default,
# only two layouts are configured.
# The format is as follows:
# - Each layout is described as a list of menu entries.
# - Each menu entry is of the form:
# menu(position_x, position_y, width, height)
# where 'menu' is either 'directory' or 'playlist'.
# - The parameters define position and size of the menu. They can
# be absolute numbers (like 10) or a percentage of the screen size
# (like 45%).
# - 'width' and 'height' can have also value of 'FILL' which means
# fill the screen from the menu's position to the border.
# - Menus may overlap.
# You must describe at least one menu (default is to fill the whole window).
# There must be at least one layout (Layout1) defined; others can be empty.
# Example: Layout1 = playlist(50%,50%,50%,50%)
# Layout2 = ""
# Layout3 = ""
# Just one layout, the directory will occupy the whole
# screen, the playlist will have 1/4 of the screen size
# and be positioned at lower right corner. (Note that
# because the playlist will be hidden by the directory
# you will have to use the TAB key to make the playlist
# visible.)
# Example: Layout1 = playlist(0,0,100%,10):directory(0,10,100%,FILL)
# The screen is split into two parts: playlist at the top
# and the directory menu at the bottom. Playlist will
# occupy 10 lines and the directory menu the rest.
#Layout1 = directory(0,0,50%,100%):playlist(50%,0,FILL,100%)
#Layout2 = directory(0,0,100%,100%):playlist(0,0,100%,100%)
#Layout3 = ""
# When the song changes, should the menu be scrolled so that the currently
# played file is visible?
#FollowPlayedFile = yes
# What to do if the interface was started and the server is already playing
# something from the playlist? If CanStartInPlaylist is set to 'yes', the
# interface will switch to the playlist. When set to 'no' it will start
# from the last directory.
#CanStartInPlaylist = yes
# Executing external commands (1 - 10) invoked with key commands (F1 - F10
# by default).
# Some arguments are substituted before executing:
# %f - file path
# %i - title made from tags
# %S - start block mark (in seconds)
# %E - end block mark (in seconds)
# Data from tags can also be substituted:
# %t - title
# %a - album
# %r - artist
# %n - track
# %m - time of the file (in seconds)
# The parameters above apply to the currently selected file. If you change
# them to capital letters, they are taken from the file currently playing.
# Programs are run using execv(), not a shell, so you can't do things like
# redirecting the output to a file. The command string is split using blank
# characters as separators; the first element is the command to be executed
# and the rest are its parameters, so if you use "echo Playing: %I" we run
# program 'echo' (from $PATH) with 2 parameters: the string 'Playing:' and
# the title of the file currently playing. Even if the title contains
# spaces, it's still one parameter and it's safe if it contains `rm -rf /`.
# Examples: ExecCommand1 = "cp %f /mnt/usb_drive"
# ExecCommand2 = "/home/joe/now_playing %I"
#ExecCommand1 =
#ExecCommand2 =
#ExecCommand3 =
#ExecCommand4 =
#ExecCommand5 =
#ExecCommand6 =
#ExecCommand7 =
#ExecCommand8 =
#ExecCommand9 =
#ExecCommand10 =
# Display the cursor in the line with the selected file. Some braille
# readers (the Handy Tech modular series ZMU 737, for example) use the
# cursor to focus and can make use of it to present the file line even
# when other fields are changing.
#UseCursorSelection = no
# Set the terminal title when running under xterm.
#SetXtermTitle = yes
# Set the terminal title when running under screen.
#SetScreenTitle = yes
# Display full paths instead of just file names in the playlist.
#PlaylistFullPaths = yes
# The following setting describes how block markers are displayed in
# the play time progress bar. Its value is a string of exactly three
# characters. The first character is displayed in a position which
# corresponds to the time marked as the start of a block and the last
# character to the time marked as the end of the block. The middle
# character is displayed instead if both the start and the end of the block
# would fall in the same position (within the resolution of the interface).
# You can turn off the displaying of these block marker positions by using
# three space characters.
#BlockDecorators = "`\"'"
# How long (in seconds) to leave a message displayed on the screen.
# Setting this to a high value allows you to scroll through the messages
# using the 'hide_message' key. Setting it to zero means you'll have to
# be quick to see any message at all. Any new messages will be queued up
# and displayed after the current message's linger time expires.
#MessageLingerTime = 3
# Does MOC display a prefix on delayed messages indicating
# the number of queued messages still to be displayed?
#PrefixQueuedMessages = yes
# String to append to the queued message count if any
# error messages are still waiting to be displayed.
#ErrorMessagesQueued = "!"
# Self-describing ModPlug options (with 'yes' or 'no' values).
#ModPlug_Oversampling = yes
#ModPlug_NoiseReduction = yes
#ModPlug_Reverb = no
#ModPlug_MegaBass = no
#ModPlug_Surround = no
# ModPlug resampling mode.
# Valid values are:
# FIR - 8 tap fir filter (extremely high quality)
# SPLINE - Cubic spline interpolation (high quality)
# LINEAR - Linear interpolation (fast, good quality)
# NEAREST - No interpolation (very fast, extremely bad sound quality)
#ModPlug_ResamplingMode = FIR
# Other self-describing ModPlug audio characteristic options.
# (Note that the 32 bit sample size seems to be buggy.)
#ModPlug_Channels = 2 # 1 or 2 channels
#ModPlug_Bits = 16 # 8, 16 or 32 bits
#ModPlug_Frequency = 44100 # 11025, 22050, 44100 or 48000 Hz
#ModPlug_ReverbDepth = 0 # 0 (quiet) to 100 (loud)
#ModPlug_ReverbDelay = 0 # Delay in ms (usually 40-200ms)
#ModPlug_BassAmount = 0 # 0 (quiet) to 100 (loud).
#ModPlug_BassRange = 10 # Cutoff in Hz (10-100).
#ModPlug_SurroundDepth = 0 # Surround level 0(quiet)-100(heavy).
#ModPlug_SurroundDelay = 0 # Surround delay in ms, usually 5-40ms.
#ModPlug_LoopCount = 0 # 0 (never), n (times) or -1 (forever)
# Self-describing TiMidity audio characteristic options.
#TiMidity_Rate = 44100 # Between 8000 and 48000
#TiMidity_Bits = 16 # 8 or 16
#TiMidity_Channels = 2 # 1 or 2
#TiMidity_Volume = 100 # 0 to 800
# You can setup a TiMidity-Config-File here.
# Leave it unset to use library defaults (/etc/timidity.cfg mostly).
# Setting it to 'yes' also uses the library defaults.
# Set it to 'no' if you don't have any configuration file.
# Otherwise set it to the name of a specific file.
#TiMidity_Config =
# Self-describing SidPlay2 audio characteristic options.
#SidPlay2_DefaultSongLength = 180 # If not in database (in seconds)
#SidPlay2_MinimumSongLength = 0 # Play at least n (in seconds)
#SidPlay2_Frequency = 44100 # 4000 to 48000
#SidPlay2_Bits = 16 # 8 or 16
#SidPlay2_Optimisation = 0 # 0 (worst quality) to 2 (best quality)
# Set path to a HVSC-compatible database (if not set, database is disabled).
#SidPlay2_Database =
# SidPlay2 playback Mode:
# "M": Mono (best for many SIDs)
# "S": Stereo
# "L"/"R": Left / Right
#SidPlay2_PlayMode = "M"
# Use start-song information from SID ('yes') or start at first song
# ('no'). Songs before the start-song won't be played. (Note that this
# option previously took the values 1 and 0; these are now deprecated
# in favour of 'yes' and 'no'.)
#SidPlay2_StartAtStart = yes
# Play sub-tunes. (Note that this option previously took the values 1
# and 0; these are now deprecated in favour of 'yes' and 'no'.)
#SidPlay2_PlaySubTunes = yes
# Run the OnSongChange command when a new song starts playing.
# Specify the full path (i.e. no leading '~') of an executable to run.
# Arguments will be passed, and you can use the following escapes:
# %a artist
# %r album
# %f filename
# %t title
# %n track
# %d file duration in XX:YY form
# %D file duration, number of seconds
# No pipes/redirects can be used directly, but writing a shell script
# can do the job.
# Example: OnSongChange = "/home/jack/.moc/myscript %a %r"
#OnSongChange =
# If RepeatSongChange is 'yes' then MOC will execute the command every time
# a song starts playing regardless of whether or not it is just repeating.
# Otherwise the command will only be executed when a different song is
# started.
#RepeatSongChange = no
# Run the OnStop command (full path, no arguments) when MOC changes state
# to stopped (i.e., when user stopped playing or changes a song).
#OnStop = "/home/jack/.moc/myscript_on_stop"
# This option determines which song to play after finishing all the songs
# in the queue. Setting this to 'yes' causes MOC to play the song which
# follows the song being played before queue playing started. If set to
# 'no', MOC will play the song following the last song in the queue if it
# is in the playlist. The default is 'yes' because this is the way other
# players usually behave. (Note that this option previously took the
# values 1 and 0; these are now deprecated in favour of 'yes' and 'no'.)
#QueueNextSongReturn = yes
I read wiki but didn't find anything useful. Thanks for any info.
Last edited by Shark (2014-12-17 12:31:30)

bleach wrote:
i see these
URxvt*background: #171717
URxvt*foreground: #B2B2B2
URxvt*color0: #171717
URxvt*color1: #3D3D3D
URxvt*color2: #ffffff
are not commented out
3d3d3d is for red but you have a blackish and color2 is for green but you have it white the rest should be the default colors. it uses the same colors only it changes the vairiant of the color you choice there or normally moc uses colors such as green blue and such which will call your console colors for those respective fields I know moc has /user/share/moc/themes/ that you can edit or make your own for instance copy one and edit it. I think htop uses the same color count which is 8 but with so green will be white when you use urxvt. 8 for normal colors 16 for bright dark and urxvt is 256 which is 16 but can use any of the 256 colors for 16.
just to clarify you have commented out your colors 4-15 and your green and red is weird, and htop aswell as moc is 8 bit. moc theme_yellow_red is default for background so it will use urxvts background
Haahaha, that is simple. And it works!!!
I didn't bother with commenting that because i thought they are not applied. Anyway, thanks man. My urxvt terminal si grateful to you and your thorough explanation. SOLVED!

Mail can't send messages: Doesn't allow fix the problem either: Help plz.

Hi all,
Mail doesn't allow me to send messages through my recent created aim.com account
I'm trying to fix the problem by changing smtp server configuration but it gives me the message:
"The servers marked with alert icons are in conflict and cannot be saved.
Two servers cannot share the same address and authentication settings.
Resolve the conflicts and try again."
There are no icons whatsoever and deleting any similar server won't take effect because Mail WON'T save the changes.
When clicking "ok" to save changes, Mail will throw the same message quoted above. So I have to click "Cancel"
Any idea to solve this issue?
Thank you.

http://support.apple.com/kb/TS3234

[Solved] URXVT cannot display Japanese Characters

Solved:
I had a typo in my locale.conf, setting to an invalid locale - apparently that did it.
Thanks for the help!
Hi everybody!
I just now re-installed Arch because I switched hard-drives (to an SSD) and everything seems to be working again, apart from one thing:
urxvt doesn't display Japanese Characters, just questionmarks instead when using ls and garbage characters otherwise.
I literally copied and pasted my ~/.Xresources from my old install, so I'm not quite sure what went wrong.
This is said file:
Urxvt.urgentOnBell: True
urxvt*cursorBlink: false
!urxvt*internalBorder: 0
!urxvt*externalBorder: 0
URxvt*.depth: 32
URxvt*.background: [85]#000000
! URxvt.scrollstyle: plain
URxvt.scrollBar: false
URxvt.foreground: grey
! red
URxvt.color1: #CC0000
URxvt.color9: #B33838
! blue
URxvt.color4: #3465A4
URxvt.color12: #729FCF
! yellow
Urxvt.color3: #b48363
URxvt.color11: #d49b4e
!URxvt.font: 8x13
urxvt*font: xft:DejaVu Sans Mono:size=8:antialas=true,xft:Kochi Gothic:size=8
This is what fc-list has to say:
% fc-list | grep "Kochi\|DejaVuSansMono"
/usr/share/fonts/TTF/DejaVuSansMono.ttf: DejaVu Sans Mono:style=Book
/usr/share/fonts/TTF/kochi-mincho-subst.ttf: Kochi Mincho,æ±é¢¨ææ:style=Regular,æ¨æº
/usr/share/fonts/TTF/kochi-gothic-subst.ttf: Kochi Gothic,æ±é¢¨ã´ã·ãã¯:style=Regular,æ¨æº
/usr/share/fonts/TTF/DejaVuSansMono-Oblique.ttf: DejaVu Sans Mono:style=Oblique
/usr/share/fonts/TTF/DejaVuSansMono-Bold.ttf: DejaVu Sans Mono:style=Bold
/usr/share/fonts/TTF/DejaVuSansMono-BoldOblique.ttf: DejaVu Sans Mono:style=Bold Oblique
I already tried re-installing the fonts and I also tried out alternative fonts, but nothing seems to work.
All the other settings from the ~/.Xresources file are applied perfectly, so I'm not quite sure where to look for the error.
My browser (dwb) displays japanese characters just fine.
Any help is greatly appreciated
Edit: I just realized that urxvt seems to completely ignore the fonts line - I had that problem once before, when I used the AMD Catalyst driver and not the open source one.
I now have an Nvidia card and started using the propietary driver - maybe that has something to do with it?
Last edited by lorizean (2013-12-02 13:16:14)

Works here:
URxvt*depth: 32
URxvt*buffered: true
URxvt*termName: rxvt-256color
URxvt.font: xft:Terminus:pixelsize=12:antialias=false
urxvt.imLocale: pl_PL.ISO8859-2
What's the output of 'localectl'?

ITunes doesn't allow me to watch a movie

I rented a movie and after downloading it iTunes doesn't allow me to watch it, it says that needs the authorization of iTunes and that iTunes must be open... but its already open and nothing happens.
Solved. I just waited 15 min and tried again

are you getting a specific error number?
Update and restore alert messages on iPhone, iPad, iPod touch and Apple TV (2nd generation)
http://support.apple.com/kb/TS1275

When i use torbutton, it asks to install flash player plug-in but it doesn't allow to download and install it.why?

when i use torbutton in firefox for anonymity, i can not play flash player based videos like youtube and it prompts to install flash player plug-in. i checked add-on in tool menu and found out this plug-in is not installed. i tried to D/L and install it but it doesn't allow me to do it and gives D/L error. whats the problem?
it should be noted that i configured "security setting" tab in torbutton prefrences to accept plug -ins rences by unckecking "disable plug-ins during tor using".

This folder does not exist on windows xp
" Tor Browser\FirefoxPortable\App\Firefox\plugins "
So this is not useful solution

[UNSOLVED] Urxvt doesn't display an icon

I've read all the stuff I can find about this, and I have had no luck.
Urxvt doesn't have an icon it's just a blank box where the icon should be. (Alt-tab, on the window border, etc.)
Any ideas?

chrizel: Thanks for the link!
Any ideas why yaourt hangs while downloading libAfterImage-1.18.tar.gz? I am assuming that it is a problem at afterstep.org,as I can't seem to get the file, even directly off their website? Either way I will try again in a day or two.
Here is what the hang looks like:
-> Downloading libAfterImage-1.18.tar.bz2...
--2008-12-21 15:23:55-- ftp://ftp.afterstep.org/stable/libAfterImage/libAfterImage-1.18.tar.bz2
=> `libAfterImage-1.18.tar.bz2.part'
Resolving ftp.afterstep.org... 66.36.251.43
Connecting to ftp.afterstep.org|66.36.251.43|:21... connected.
Logging in as anonymous ... Logged in!
==> SYST ... done. ==> PWD ... done.
==> TYPE I ... done. ==> CWD /stable/libAfterImage ... done.
==> SIZE libAfterImage-1.18.tar.bz2 ... 1050328
==> PASV ...
Last edited by monstermudder78 (2008-12-21 23:25:38)

My aperture trash doesn't allow me to 'put back' my images

Please help
I am using aperture 3.2.2 on a MacPro3.1 Mac OSX 10.6.8
I suddenly have 5000 of my images in aperture trash. I don't know how they ended up in trash. I fail when trying to put the images back in their projects. When i right-click (or control-click) I have a very short drop down menu to chose from and it doesn't include the 'put back' option?? I have seen people posting before on this problem. I haven't seen a solution yet. Anyone knows how to solve? By the way, I tried exporting to re-import but Aperture doesn't allow this for trash-items...

Try rrepairing the library See Aperture 3: Troubleshooting Basics
Post back if that doesn;t help

All of a sudden...the tabs won't open a new tab...when firefox is open I can SEE the new tab block with a plus in it but when I click, it doesn't open

I learned to LOVE firefox because of the multiple tab feature. I have the color tab add on and LOVE it!! But all of a sudden, the tabs won't open!!! FI: I have one tab open to HuffPo and then I click the square next to it with the + in the middle. This used to open a new tab but now when I click it doesn't open....I have tried upgrading to the beta...no use....uninstalled the beta and reinstalled 3.6...nothing....It is making me CRAZY!!!!
Please help.
Stephanie

That can a problem with the Ask<i></i>.com toolbar (Tools > Add-ons > Extensions)
See:
* [[Troubleshooting extensions and themes]]

[SOLVED] URxvt doesn't allow tabs to be opened as regular user

Similar Messages

Maybe you are looking for