[SOLVED]usb drive not mounting

I get this error when I try to mount a usb drive in pcmanfm. It used to work correctly before. Since then I tried uninstalling fam and installed gamin. But now I have reverted back to fam and I still see this. What could be the issue? I can mount the drive manually in CLI, but I was just wondering what suddenly happened.
inxs ~ > pcmanfm
(pcmanfm:4961): Gtk-WARNING **: Failed to set text from markup due to error parsing markup: Error on line 1 char 57: '-' is not a valid character following a '<' character; it may not begin an element name
(pcmanfm:4961): Gtk-WARNING **: Failed to set text from markup due to error parsing markup: Error on line 1 char 57: '-' is not a valid character following a '<' character; it may not begin an element name
Last edited by Inxsible (2009-02-13 05:43:07)

spookyln wrote:
this working like a charm.
edit your /etc/PolicyKit/PolicyKit.conf
<?xml version="1.0" encoding="UTF-8"?> 
<!DOCTYPE pkconfig PUBLIC "-//freedesktop//DTD PolicyKit Configuration 1.0//EN"
"http://hal.freedesktop.org/releases/PolicyKit/1.0/config.dtd">

<config version="0.1">
<match action="org.freedesktop.hal.storage.mount-removable">
<return result="yes"/>
</match>
</config>
Bingo!! Man you guys are good.

Similar Messages

USB Drive not mounting on Mac Pro, mounts on other Macs?

Hello.
I have a USB drive that mounts on just about every Mac (just about because I haven't tried on them all) in our studio. Intel & PPC, 10.5.6 and 10.4.11. But, when I try and mount it on my Mac Pro, it won't mount. The only difference (other than it being a Mac Pro) is that it's running 10.5.7 — though, I have an iMac at home running 10.5.7 and it mounts there no problem as well?
I've confirmed the USB ports working (all of them), but for some reason, this drive doesn't mount (can't see it in Disk Utility or other 3rd party drive utilities)?
Anyone have any suggestions?
Regards,
Kristin.

Yea, I've already tried both of those things and neither have worked.
So weird. I've read a lot of reports on these boards about 10.5.7 and USB not playing well together, but the fat that I've been able to get it to mount on a 10.5.7 machine...?
k.

USB drives not mounting after sleep

I've started to experience a frustrating problem whereby any connected USB drive fails to mount after the Mac has been to sleep. Rather alarmingly I get an error message saying "disk not ejected properly"
The set-up I have is two USB drives connected to my early 2011 MacBook Pro via a D-Link mains powered USB hub. I'd planned to have the Mac wake up at 2am for SuperDuper to perform a backup but it's proving impossible as the drive is never available and I have to do a restart before the Mac sees it again.
I've tried a few solutions I've seen online such as installing Jettison (didn't work) and making sure Spotlight isn't indexing the drives (didn't work either).
Can anyone suggest anything else?
THANKS

You can boot OS X from USB2 or FireWire as well as internal drives. There are also two unused SATA ports hidden away inside that OS X can use, but Vista/XP won't see. There is a $24 kit from NewerTech to connect SATA cable, run out PCI slot adapter, and use eSATA shielded cable to a 2-drive enclosure ($67+).
I always boot from an alternate boot drive before ever doing an Mac OS update - repair the drive, do backup, other maintenance. And even sometimes apply the update from there (requires using a standalone downloaded combined update, which is preferred method). Never apply an update w/o a working bootable backup. Something that requires multiple licenses I suspect with XP/Vista.
I have external backup and restore drives for Vista, Mac OS boot drive, 2-drive RAID for Vista, and Vista boot drive.
All of my drives are GUID. Vista is 64-bit, and has some support for EFI (SP1 will bring better support for UEFI).
Disk arbitration has been updated and improved and some products even had to wait for later versions (10.4.8 introduced a number of fixes I understand). I would be more concerned with make of drives and whether they have GUID/GPL or MBR partition tables.

[SOLVED]Usb drive not detected in kde

not appear in the notification, but in dmesg appear
5458.314319] usb 2-3: new high-speed USB device number 4 using ehci-pci
[ 5458.508037] usb-storage 2-3:1.0: USB Mass Storage device detected
[ 5458.508098] scsi12 : usb-storage 2-3:1.0
[ 5458.508149] usbcore: registered new interface driver usb-storage
[ 5459.585989] scsi 12:0:0:0: Direct-Access USB DISK Pro PMAP PQ: 0 ANSI: 4
[ 5460.612052] sd 12:0:0:0: [sdb] 31260672 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 5460.613431] sd 12:0:0:0: [sdb] Write Protect is off
[ 5460.613434] sd 12:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 5460.614802] sd 12:0:0:0: [sdb] No Caching mode page found
[ 5460.614805] sd 12:0:0:0: [sdb] Assuming drive cache: write through
[ 5460.619671] sd 12:0:0:0: [sdb] No Caching mode page found
[ 5460.619674] sd 12:0:0:0: [sdb] Assuming drive cache: write through
[ 5460.642643] sdb: sdb1
[ 5460.649748] sd 12:0:0:0: [sdb] No Caching mode page found
[ 5460.649751] sd 12:0:0:0: [sdb] Assuming drive cache: write through
[ 5460.649753] sd 12:0:0:0: [sdb] Attached SCSI removable disk
[ 5476.956859] ath5k: ath5k_hw_get_isr: ISR: 0x00000400 IMR: 0x00000000
[ 5613.844729] usb 2-3: USB disconnect, device number 4
[ 5616.296689] usb 2-3: new high-speed USB device number 5 using ehci-pci
[ 5616.425854] usb-storage 2-3:1.0: USB Mass Storage device detected
[ 5616.425903] scsi13 : usb-storage 2-3:1.0
[ 5617.501846] scsi 13:0:0:0: Direct-Access USB DISK Pro PMAP PQ: 0 ANSI: 4
[ 5618.534031] sd 13:0:0:0: [sdb] 31260672 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 5618.535398] sd 13:0:0:0: [sdb] Write Protect is off
[ 5618.535401] sd 13:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 5618.536784] sd 13:0:0:0: [sdb] No Caching mode page found
[ 5618.536790] sd 13:0:0:0: [sdb] Assuming drive cache: write through
[ 5618.541762] sd 13:0:0:0: [sdb] No Caching mode page found
[ 5618.541765] sd 13:0:0:0: [sdb] Assuming drive cache: write through
[ 5618.564608] sdb: sdb1
[ 5618.571842] sd 13:0:0:0: [sdb] No Caching mode page found
[ 5618.571845] sd 13:0:0:0: [sdb] Assuming drive cache: write through
[ 5618.571847] sd 13:0:0:0: [sdb] Attached SCSI removable disk
uname -a
Linux tarro 3.13.5-1-ARCH #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014 x86_64 GNU/Linux
cat /etc/group
root:x:0:root
bin:x:1:root,bin,daemon
daemon:x:2:root,bin,daemon
sys:x:3:root,bin
adm:x:4:root,daemon
tty:x:5:
disk:x:6:root,darkmind
lp:x:7:daemon,darkmind
mem:x:8:
kmem:x:9:
wheel:x:10:root,darkmind,pct
ftp:x:11:
mail:x:12:
uucp:x:14:
log:x:19:root
utmp:x:20:
locate:x:21:
rfkill:x:24:
smmsp:x:25:
http:x:33:
games:x:50:darkmind
lock:x:54:
uuidd:x:68:
dbus:x:81:
network:x:90:darkmind,pct
video:x:91:darkmind,pct
audio:x:92:darkmind,pct
optical:x:93:pct,darkmind
floppy:x:94:
storage:x:95:darkmind
scanner:x:96:pct,darkmind
power:x:98:
nobody:x:99:
users:x:100:pct
systemd-journal:x:190:
polkitd:x:102:
transmission:x:169:
avahi:x:84:
usbmux:x:140:darkmind
ntp:x:87:
mysql:x:89:
kdm:x:135:
git:x:999:
pct:x:1001:
(i'm darkmind)
somebody help?
Last edited by dunkles (2014-02-25 22:50:53)

ewaller wrote:I am not sure what that means. Are you expecting a pop up notification in KDE?
yes
ewaller wrote:Does Dolphin show the volumes?
not show the volumes, nothing happens when plug a usb drive
ewaller wrote:Do you have udisks installed? How about udisks2?
yes

Usb optical drive not mounting

Usb Optical Drive not mounting via MacBook Pro (13inch 2013) since update to 10.10.1. Any positive solutions?

Hello MicroTuFF,
If you cannot get your USB SuperDrive to not mount disks, then take a look at the troubleshooting in the articles below. Start at the Doesn't accept discs section for your specific issue.
Get help with the slot-loading SuperDrive on your Mac computer
http://support.apple.com/en-us/HT201788
Regards,
-Norm G.

SOLUTION - USB 3.0 External Drives Not Mounting on MBP Retinas - SOLUTION

So I have been having the same problem as everyone else who has issues with USB 3 external hard drives not mounting on their MBP Retinas. My friend told me to try unplugging the USB cord and plugging it back in instantly (like in half a second, so as to not let the power turn off on the drive). I had my doubts but then I tried it just now, and MY DRIVE MOUNTED.
GO TRY IT AND SEE IF IT WORKS FOR YOU!
UPDATE: I am using a powered external drive (Seagate Backup Pro 3TB). Not sure if this will work with bus powered drives, but I think it might, as my friend might have been using a bus powered drive.
Also, I just bought two Hitachi TOURO 750GB bus powered portable drives (7200rpm/USB 3.0) and they mounted perfectly without problem as soon as I plugged it in for the first time.

Roderick A. Santiano wrote:
So I have been having the same problem as everyone else who has issues with USB 3 external hard drives not mounting on their MBP Retinas. My friend told me to try unplugging the USB cord and plugging it back in instantly (like in half a second, so as to not let the power turn off on the drive)...
Did you unplug the USB cable from the computer or from the external drive? This fix has been posted here previously but it was reported that the cable had to be unplugged from the device, not the computer. If the cable was unplugged from the computer instead, the fix didn't work.

USB drive only mounts as Local Drive Need it to mount as USB Drive to create recovery drive

subject pretty much says it all. Using an HP Sleekbook 15, it tells me to make recovery disk. I opt for the USB drive option and buy a new Sandisk Cruze Glide. Plugged it in. Started Recovery program to make disk. Program tells me to insert the USB drive or plugin my DVD burner. I check the file explorer and find the USB drive is mounted as Local Drive E:. No amount of inserting and removal will trigger the program to continue.
Doc read on SanDisk forum implied this is a windows 8 compatibility issue where Win 8 requires new USB drives that meet Win 8 compatibility to mount as Local devices.
I saw here that the USB drive MUST be a removable device inorder to be made bootable.
Help! this is inconsistant and negates the whole reason for using removable media if it can't be made to be seen as a boot recovery drive.
I need a solution, can those who know please advise.

Not all USB 3.0 is Windows 8 compatible. It will have the compability logo on the back or front of the package.
I have run across several interesting articles that mention Windows 8 can create the Recovery Drive with I assume any flash drive.
http://lifehacker.com/5991431/how-to-create-a-recovery-flash-drive-for-windows-8-and-free-up-some-ha...
http://www.techrepublic.com/blog/window-on-windows/create-a-recovery-drive-in-windows-8/7261
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

10.4.7 & FireWire drives not mounting

Hi everyone,
since this morning my trusted LaCie FW HDs won't mount, are not seen in System Profiler and Disk Utility.
I tried almost every thing I could find, resetting vram, pram, powering everything down, waiting, disconnecting all the cables, powering back up, connecting one after another, etc. - no changes.
Every application runs fine. Except, of course, Logic because I have all my sounds and song projects on these drives.
My system.log continues to say every second again:
...-Computer kernel[0]: AppleFWOHCI_AsyncTransmit::waitForDMA - context not going inactive.
The console.log repeats:
-Computer root[175]: [MAFL] attempt to make FSSpec for "121-210.cypress" failed -120\n
-Computer root[175]: [MAFL] attempt to make FSSpec for "210.cypress" failed -120\n
-Computer root[175]: [MAFL] found no firmware to load for 210\n
Does anybody know what these logs mean?
Is anybody else having this problem with 10.4.7?
I started a similar thread on A-S-D- Installation and Setup, only to find out, that a lot of people there are experiencing the same issue (FW drives not mounting, not showing).
Would resetting the PMU help?
Please help, I can't work

Back from the mysterious world of HDs, so easy to solve..., sometimes...
I tried the HDs on my friends older PB and all was fine.
Resetting my computers PMU did not solve the problem, after I tried everything else.
I refrained from reinstalling 10.4.7.
All other applications (but Logic, because I could not access my files) were running smooth.
Going back to 10 a.m. yesterday, basically starting over, there was one thing I missed checking (being human): the AC to DC converters supplied by LaCie for their drives.
See, they are under my desk, like out of sight...
Voilá! Individual testing revealed, that the AC/DC converter for the first LaCie drive in my chain did not spin up any of my other six LaCie drives, which I never run all at the same time, but they still have their own power supply.
Changed power supply on the first HD and now I am back to the fast speed and glitch free system I love. Back to enjoying work as well
What a day. And I am very sorry, that I was implying to blame 10.4.7 for this. My PB has never been faster

When i connect my ipod to my macbook it shows up as a usb drive not in itunes

When i connect my ipod to my macbook it shows up as a usb drive not in itunes. I have latest MAC OS updates 10.7.5. Latest itunes. Also at some point it must have worked because my music library is on the ipod.
Help!!

Disabling disk use MAY work... my Mac OS X is not that new so I really don't know. Go in itunes on the ipod summary page and go to the check boxes to do that. ??? good luck

10.6 to upgrade 10.8 my promise vess drive not mount again

when i upgrade 10.6 to 10.8 my promise vess drive not mount again.

If you are using Safari, try a different browser such as Mozilla Firefox Web Browser or Google Chrome

[SOLVED]Mounting usb drives "not authorized" with thunar-volman (XFCE)

Hi,
I'm new to Arch (even though I must be approximately at my 15th try at installing it properly) and I have a problem with thunar-volman.
Whenever I log in as user, and try to mount a usb drive with thunar, let's say I want to plug a drive labeled Ext3_8Go, I get the same message in a pop-up window : "Failed to mount Ext3_8Go (or anything close, not in English in the text), not authorized (that part is in English)"
My install is :
- net install
- partitions : 9Go for /, no swap, no separate /home
- packages : base and base-devel. The only modifications in the package list is that I remove ppp, pcmciautils, and xfsprogs.
- config : at the install stage I only modify rc.conf to change LOCALE and HOSTNAME, and pacman's mirrorlist to allow all French mirrors in addition to the one at the top.
When the usb installation is over, I run this script :
"installation_xfce.sh" (there may be some errors left, I modify this script as I learn) :
#!/bin/bash
# expected environment : freshly installed archlinux, login : root.
echo "Are you connected to internet ? If not, please Ctrl+C and reload this script when connected"
echo "Otherwise, press ENTER to continue installation"
read var_dummy
echo "Creation of the user : please type in your user name :"
read var_username
useradd -u 1000 -g users -G audio,lp,storage,optical,video,wheel,games,power,network -d /home/$var_username/ -s /bin/bash -m $var_username
echo "You will now be asked to create the password for this user:"
passwd $var_username
# Add servers for pacman to find packages
cat >> /etc/pacman.conf << EOF
[multilib]
Include = /etc/pacman.d/mirrorlist
[archlinuxfr]
Server = http://repo.archlinux.fr/\$arch
[catalyst]
Server = http://catalyst.apocalypsus.net/repo/catalyst/\$arch
EOF
# Install packages
pacman -Syyu
pacman -S acpi acpid alsa-oss alsa-plugins alsa-utils catalyst catalyst-utils cpufrequtils cups dbus gstreamer0.10-base-plugins iptables laptop-mode-tools mesa net-tools netcfg ntp pm-utils rfkill rsync sudo ttf-dejavu vim wireless_tools xf86-input-evdev xorg-server xorg-utils xorg-xinit xorg-xinput yaourt conky gamin gnome-icon-theme gnome-keyring gvfs-afc network-manager-applet networkmanager slim slim-themes archlinux-themes-slim hicolor-icon-theme xfce4 xfce4-goodies
# If pacman failed, better stop the script here, and wait for a network connection
if [[ $?!=0 ]]
then
echo : failed to install packages - check your network connection, or review script
exit 1
fi
# Fix sound issue
cat > /home/$var_username/.asoundrc << EOF
pcm.!default{
type hw
card 1
device 0
ctl.!default{
type hw
card 1
device 0
EOF
chown $var_username:users /home/$var_username/.asoundrc
# Configure video settings for X to use Catalyst
if [[ ! -e /etc/X11/xorg.conf.d ]]
then
mkdir /etc/X11/xorg.conf.d
fi
cat > /etc/X11/xorg.conf.d/20-fglrx.conf << EOF
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
EndSection
EOF
sed -e 's/top_left/bottom_right/' -e '/alignment/i\double_buffer yes' -e '/CPU Usage/a\${color lightgrey}Temperatures:' -e '/CPU Usage/a\ CPU:$color ${hwmon 0 temp 1}°C' </etc/conky/conky.conf >/home/$var_username/.conkyrc
chown $var_username:users /home/$var_username/.conkyrc
# Install clickpad support
yaourt -S xf86-input-synaptics-clickpad
# Add french keyboard to X
sed '/MatchIsKeyboard/a\\tOption "XkbLayout" "fr"' </etc/X11/xorg.conf.d/10-evdev.conf >/etc/X11/xorg.conf.d/10-evdev.conf.new
mv -f /etc/X11/xorg.conf.d/10-evdev.conf.new /etc/X11/xorg.conf.d/10-evdev.conf
# Add new daemons, remove old ones, disable hwclock and remove netfs since I don't use it. add it if you need it
sed '/DAEMONS=/c\DAEMONS=(!hwclock dbus syslog-ng networkmanager laptop-mode acpid @alsa @cupsd @cpufrequtils ntpd crond)' </etc/rc.conf >/etc/rc.conf.new
mv -f /etc/rc.conf.new /etc/rc.conf
# Slim login manager ; change theme
mv /usr/share/slim/themes/archlinux-darch-grey /tmp/
mv /usr/share/slim/themes/default /tmp/
rm -r /usr/share/slim/themes/*
mv /tmp/archlinux-darch-grey /usr/share/slim/themes
mv /tmp/default /usr/share/slim/themes
sed '/^current_theme/c\current_theme archlinux-darch-grey' </etc/slim.conf >/etc/slim.conf
# XFCE login, and thunar launched as a daemon
sed '/^# exec/c\' </etc/skel/.xinitrc >/tmp/.xinitrc
sed '/^# .../c\' </tmp/.xinitrc >/home/$var_username/.xinitrc
cat >> /home/$var_username/.xinitrc << EOF
exec ck-launch-session startxfce4
thunar --daemon &
EOF
chown $var_username:users /home/$var_username/.xinitrc
# Boot to runlevel 5 now, and run slim then
sed -e 's/id:3/#id:3/' -e 's/#id:5/id:5/' -e 's|x:5:respawn:/usr/bin/xdm|#x:5:respawn:/usr/bin/xdm|' -e 's|#x:5:respawn:/usr/bin/slim|x:5:respawn:/usr/bin/slim|' </etc/inittab >/etc/inittab.new
mv -f /etc/inittab.new /etc/inittab
# Add colored prompt to user and root
sed '/^PS1/c\' </etc/skel/.bashrc >/root/.bashrc
cat >> /root/.bashrc << EOF
PS1='\[\e[0;32m\]\u@\h\[\e[m\] \[\e[0;35m\]\w\[\e[m\] \[\e[m\] \[\e[0;32m\]\t -\[\e[m\] \[\e[1;31m\]\$ \[\e[m\] '
EOF
cp /root/.bashrc /home/$var_username/.bashrc
chown $var_username:users /home/$var_username/.bashrc
# How does one do that automatically ?
# Manually add user to sudoers
EDITOR="vim" visudo
# Reboot, because it's quick and I'm too lazy to learn how to start all the daemons and others.
reboot
I can mount as a user, no password asked, with :
udisks --mount /dev/sdb2
but the GUI method tells me "not authorized".
"groups user" outputs :
lp wheel games network video audio optical storage power users
the command "ck-list-sessions" outputs :
Session2:
unix-user = '1000'
realname = ''
seat = 'Seat1'
session-type = ''
active = TRUE
x11-display = ':0.0'
x11-display-device = '/dev/tty7'
display-device = ''
remote-host-name = ''
is-local = TRUE
on-since = '2011-08-15T08:56:03.716103Z'
login-session-id = '1'
Session1:
unix-user = '1000'
realname = ''
seat = 'Seat2'
session-type = ''
active = FALSE
x11-display = ':0.0'
x11-display-device = ''
display-device = ''
remote-host-name = ''
is-local = TRUE
on-since = '2011-08-15T08:56:03.573029Z'
login-session-id = '1'
For those who don't have time to read the installation script, DBUS is in the DAEMONS list of rc.conf, and .xinitrc launches : exec ck-launch-session startxfce4
Any idea ?
Last edited by choubbi (2011-08-15 15:05:04)

Thanks a lot !
That worked !
I stumbled across this part of the wiki several times before, but didn't really understand so I had not tried.
If anyone's interested in the script, here's the corrected version :
#!/bin/bash
# expected environment : freshly installed archlinux, login : root.
echo "Are you connected to internet ? If not, please Ctrl+C and reload this script when connected"
echo "Otherwise, press ENTER to continue installation"
read var_dummy
echo "Creation of the user : please type in your user name :"
read var_username
useradd -u 1000 -g users -G audio,lp,storage,optical,video,wheel,games,power,network -d /home/$var_username/ -s /bin/bash -m $var_username
echo "You will now be asked to create the password for this user:"
passwd $var_username
# Add servers for pacman to find packages
cat >> /etc/pacman.conf << EOF
[multilib]
Include = /etc/pacman.d/mirrorlist
[archlinuxfr]
Server = http://repo.archlinux.fr/\$arch
[catalyst]
Server = http://catalyst.apocalypsus.net/repo/catalyst/\$arch
EOF
# Install packages
pacman -Syyu
pacman -S acpi acpid alsa-oss alsa-plugins alsa-utils catalyst catalyst-utils cpufrequtils cups dbus gstreamer0.10-base-plugins iptables laptop-mode-tools mesa net-tools netcfg ntp pm-utils rfkill rsync sudo ttf-dejavu vim wireless_tools xf86-input-evdev xorg-server xorg-utils xorg-xinit xorg-xinput yaourt conky gamin gnome-icon-theme gnome-keyring gvfs-afc network-manager-applet networkmanager slim slim-themes archlinux-themes-slim hicolor-icon-theme xfce4 xfce4-goodies
# If pacman failed, better stop the script here, and wait for a network connection
if [[ $?!=0 ]]
then
echo : failed to install packages - check your network connection, or review script
exit 1
fi
# Fix sound issue
cat > /home/$var_username/.asoundrc << EOF
pcm.!default{
type hw
card 1
device 0
ctl.!default{
type hw
card 1
device 0
EOF
chown $var_username:users /home/$var_username/.asoundrc
# Configure video settings for X to use Catalyst
if [[ ! -e /etc/X11/xorg.conf.d ]]
then
mkdir /etc/X11/xorg.conf.d
fi
cat > /etc/X11/xorg.conf.d/20-fglrx.conf << EOF
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
EndSection
EOF
sed -e 's/top_left/bottom_right/' -e '/alignment/i\double_buffer yes' -e '/CPU Usage/a\${color lightgrey}Temperatures:' -e '/CPU Usage/a\ CPU:$color ${hwmon 0 temp 1}°C' </etc/conky/conky.conf >/home/$var_username/.conkyrc
chown $var_username:users /home/$var_username/.conkyrc
# Install clickpad support
yaourt -S xf86-input-synaptics-clickpad
# Add french keyboard to X
sed '/MatchIsKeyboard/a\\tOption "XkbLayout" "fr"' </etc/X11/xorg.conf.d/10-evdev.conf >/etc/X11/xorg.conf.d/10-evdev.conf.new
mv -f /etc/X11/xorg.conf.d/10-evdev.conf.new /etc/X11/xorg.conf.d/10-evdev.conf
# Add new daemons, remove old ones, disable hwclock and remove netfs since I don't use it. add it if you need it
sed '/DAEMONS=/c\DAEMONS=(!hwclock dbus syslog-ng networkmanager laptop-mode acpid @alsa @cupsd @cpufrequtils ntpd crond)' </etc/rc.conf >/etc/rc.conf.new
mv -f /etc/rc.conf.new /etc/rc.conf
# Slim login manager ; change theme
mv /usr/share/slim/themes/archlinux-darch-grey /tmp/
mv /usr/share/slim/themes/default /tmp/
rm -r /usr/share/slim/themes/*
mv /tmp/archlinux-darch-grey /usr/share/slim/themes
mv /tmp/default /usr/share/slim/themes
sed '/^current_theme/c\current_theme archlinux-darch-grey' </etc/slim.conf >/etc/slim.conf
# XFCE login, and thunar launched as a daemon (note that the part with 'if [ -d /etc/X11/xinit/xinitrc.d ]" is not present, to avoid mounting problems when logged as regular user)
cat > /home/$var_username/.xinitrc << EOF
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
exec ck-launch-session startxfce4
thunar --daemon &
EOF
chown $var_username:users /home/$var_username/.xinitrc
# Boot to runlevel 5 now, and run slim then
sed -e 's/id:3/#id:3/' -e 's/#id:5/id:5/' -e 's|x:5:respawn:/usr/bin/xdm|#x:5:respawn:/usr/bin/xdm|' -e 's|#x:5:respawn:/usr/bin/slim|x:5:respawn:/usr/bin/slim|' </etc/inittab >/etc/inittab.new
mv -f /etc/inittab.new /etc/inittab
# Add colored prompt to user and root
sed '/^PS1/c\' </etc/skel/.bashrc >/root/.bashrc
cat >> /root/.bashrc << EOF
PS1='\[\e[0;32m\]\u@\h\[\e[m\] \[\e[0;35m\]\w\[\e[m\] \[\e[m\] \[\e[0;32m\]\t -\[\e[m\] \[\e[1;31m\]\$ \[\e[m\] '
EOF
cp /root/.bashrc /home/$var_username/.bashrc
chown $var_username:users /home/$var_username/.bashrc
# How does one do that automatically ?
# Manually add user to sudoers
EDITOR="vim" visudo
# Reboot, because it's quick and I'm too lazy to learn how to start all the daemons and others.
reboot
The important part of the script to solve the problem is :
cat > /home/$var_username/.xinitrc << EOF
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
exec ck-launch-session startxfce4
thunar --daemon &
EOF
chown $var_username:users /home/$var_username/.xinitrc

USB Flash Drive not mounting

I recently bought an 8GB USB flash drive, which came formatted FAT-32. The drive was put into a friend's Windoze laptop and had a couple GBs of jpeg and avi files transferred to it. I took the drive home and put it in my white MacBook (4GB RAM, Leopard 10.5.8) and it would not mount. I put it in my G4 MacMini; likewise, it wouldn't mount. I am assuming it also won't mount in all my older Macs with USB, either. I returned it to the Windoze laptop, and it ALSO wouldn't mount this time, except as one pulled the flash drive from the Windoze laptop, for a second a window with the flash drive's contents would flash on the desktop of the laptop. Originally, the flash drive was "properly" ejected from the Windoze laptop.
On the MacBook, both Disk Utility and DiskWarrior do not see the flash drive when it is in the USB port (either port). However, Apple System Profiler does recognize when it is plugged into the port. ASP returns the following information when the flash drive is in the high speed USB port:
"Flash Disk:
Product ID: 0x3234
Vendor ID: 0x1221
Version: 0.00
Serial Number: 10000000000003CF
Speed: Up to 480 Mb/sec
Manufacturer: USB2.0
Location ID: 0x24100000
Current Available (mA): 500
Current Required (mA): 100"
Anybody have any idea what is the cause of my problems with the flash Drive and how I can get the drive to mount? I don't think the problem is a function of my Apple hardware, as my USB ports on all my machines function with everything else USB which I have without problems. Thanks.

I know that, but I have USB in my older Macs, too, and besides, some of the most knowledgeable people are in these older forums!!
I've come to the conclusion that the drive may be defective, too, but I was just looking for some possible angle which I'd not already considered. I tried reformatting, but without the drive even being recognized, it isn't even possible to reformat. I can only get ASP to indicate that it is attached.
Thanks for your try!

2 different brand USB external hard drives not mounting- Firewire ok

Hi, first timer here so apologies in advance.
i have to different brand external hard disks and they both show up fine with a firewire connection. the trouble is that i need to use the usb connection and neither show up. (shows up in system profiler though but not disk utility.) why USB if i can use Firewire? I will be using the disk to connect to a Wii console via usb port and the Wii is not recognizing either disk either?
Any ideas on how to get one of these disks to mount by USB?
cables are fine as work with USB only hard disks.
Thanks in advance

Hello Bob,
Thanks for your reply.
Unfortunately it does not show up at all in "disk utility". But appears in System Profiler under USB. This is true of 2 different external hard drives that mount fine with the firewire cables. One is a 3.5 inch and the other is a 2.5 inch portable. The USB cable is not faulty as tested it with another USB peripheral. Now a big believer in coincidences. Am i doing something wrong?
any other thoughts?
thanks again

HT2494 USB ports not mounting external drives. Would appreciate a way to troubleshoot. Thanks

My MacBook Pro is no longer displaying the drives I plug into the USB ports.
Could someone tell me what might be wrong and how to troubleshoot? It's still under warrantee, thank goodness.
Many thanks to all,
Natalie

I've noticed the Firewire bus to be less stable under Intel chips, but I'm not positive. It may be that my devices are just getting tired.
Anyhow... troubleshooting (when was the last time you cleared the PRAM?)
1. Turn off your MacBook (not restart, power off)
2. Turn it back on, wait for it to fully startup
3. With the power connected and the drive turned on, connect the Firewire drive
If it still doesn't work, can you try a different Firewire cable? I'm guessing the cable probably works fine on your iBok G4, right? If it still doesn't work, it would seem that the Firewire port is not working properly. You can also try booting up with your install DVD and see if Disk Utility can read your Firewire drive. If it does then you might need to reinstall OS X.
USB portable drive
Repeat steps 1 and 2 above
3. Plug your MacBook into AC power (my USB drive will not mount unless I plug into AC power)
4. Connect your USB drive
Again, I'm guessing this drive too works fine with your iBook?
You could try accessing the drive while booting up from the install DVD too. This should rule out whether it is a software or hardware problem.
It's a hardware problem if you can't access either the Firewire or USB drive (on AC power) while booting up from your install DVD. It's a software problem if you can.
Good luck
Greg

External Hard Drives not Mounting after Yosemite Upgrade

I've just upgraded to Yosemite, and none of my external (USB) hard drives are mounting (they don't even appear in Disk Utility).
Any ideas?

MacBook Pro 2009. 250 SD, HD 8Gb Ram.
I have had this issue for about a year...with no resolve!
Apple and the User community have not been able to solve issue.
I have had to work around it since the Oct 2013 Mavericks upgrade which “killed” (rendered unmountable) both my USB and Optical drives.
Hundreds of replies and remedies have not corrected my issue. Hundreds of replies stating that if there was a global issue it would of been fixed by Apple, not true. And dismissive replies stating that there must be a hardware issue are very discouraging.
So now, hoping to help the voiceless masses, I'm forced to share my experience.
As I stated, I have been having the issue since one of the Mavericks upgrades. The upgrade rendered externally attached drives unmountable...They are all seen in Disk Utility. They are just not mountable. Regardless of the flavor of the disk format, either Mac or PC, they are found, seen and refuse to mount. I can see them using Terminal commands, I can see them in System Report. I can reset all the memory I want...turn it off, reset, sleep, turn on, restart...NOPE...And the optical drive takes in disks but ejects them after an attempted mounting. Keep in mind, there are no physical issues with either USB or optical drives.
So now...I have had enough and need to correct the issue or buy a new equipment - starting to get into software development and need working equipment!!!
For the past month, I have been visiting the Apple store to assist in my issues...Back Story: I'm an IT Field Tech for the largest department store in the country and I have the good fortune of dropping in the Apple store anytime I want...The Geniuses booted the MB with a bootable image of Mavericks, and the USB and Optical drives WORKED fine...So, after I had stumped the Geniuses with my problems, we agreed that we would attempt to format and re-image the MacBook...Fine, do it, it's backed-up, how you ask? - Via my wireless My Book Live 3T drive, which only took 24 hours to backup, AKA Time Machine!
Great news! The re-image of Mavericks proved to work! I WAS able to mount external drives attached! How is that possible? Don't know, don't care! It just worked! So happy!
But wait! I then took the laptop home. Connected to my WiFi, to update Mavericks to the latest version...Good so far! Then it came time for a Time Machine restore, AKA Migration Assistance restore...So, I proceeded to migrate data back to my MB via wireless drive, good so far, booted in Migration Assistant, and I chose to restore everything except the network files, thinking that may be an issue...22 Hours later, the MB migrated without issue...all apps and personal files had migrated! YAY!
BUT NOW THE USB AND OPTICAL DRIVES FAILED TO MOUNT!!!
Great now what? I know, I will just re-image and start again...WAIT, I don't have a Mavericks Install Disk, no problem, I will just create a bootable USB drive with the Mavericks Install Image I downloaded onto my MB this month...NO YOU CANNOT, because you have no use of the USB drives!...And, Apple stopped making OS CDs back in 2009...Oh, and that wouldn't of done me any good, because the optical dive was unusable, anyway!
SO, back to the Apple store with my head hanging! At this point, Yosemite came out the previous Thursday, so no more Mavericks images, great! Perhaps the new OS will alleviate my nightmare!!!!...So, they re-imaged my Mac with Mavericks, drives worked again! SO, I took my MB home and attempted to download the new OS, Yosemite...which only took 2 days due to the amount of traffic on Apple's servers!...Anyway, Yosemite finally installed without out issue! Drives still worked! And so, I shutdown and restarted the system...No issues, USB and optical drives worked beautifully! Yay, Yosemite!...Fixed all my troubles!!!...Not so fast...
And so, I, again, attempted to do a Time Machine restore, via WiFi, this time it took 24 hours to restore...AND it worked! All apps and personal files transferred without issue, So happy! Put the laptop in Sleep and left it home and went to work! Came back from work, tested the system without issues. Rebooted...USB and Optical drive are NOT MOUNTABLE!
So now, what is the file that the restore keeps pushing to my MB that kills the USB and optical drives?
I would just stop restoring from a Time Machine backup, but the only way to get into the TM image is to use Migration Assistant. I cannot view the date in time of the image in TM's Star Wars time line. So, I'm forced to back up everything from the image in Migration Assistance. Not sure that it being an encrypted image has anything to do with it...
...Regardless, what is being “restored” to the MB that continues to configure the OS in such a way that makes all external drives unmountable...keep in mind, my external keyboard, hub and mouse are usable via USB.

[SOLVED]usb drive not mounting

Similar Messages

Maybe you are looking for