[SOLVED]User Access To Only One Folder .

Hello ,
I want to have a kind of user that have access to only one folder and nothing else ?!
Last edited by arashroshan (2012-06-26 10:03:03)

arashroshan wrote:
Thank you for replying , i think i am going to use jailkit .
tomk and and thesequel , thank you for correcting me !
You said thanks to tomk, but you didnt read what he said

Similar Messages

Is there a way have a file only accessable by only one user at a time

Here's the question...
I want to set up a file so that it can only be accessed by only one person at a time - is there any way to do this?

Turn off fast user switching and autologin, making all users log off before other users can use the machine.

Is there a way to set firefox so it only allows access to only one website / (ip address).

Is there a way to set firefox so it only allows access to only one website / (ip address) and block traffic from everything else (the entire web) other than the one site I want to allow? The site I want to allow is a corporate web application that will only work in firefox. We as a business run a windows server and all client desktops run Internet Explorer with security setting controlled by group policy. We have already locked down the security setting in firefox so users can’t bypass the proxy server settings.

I have a proxy server set up (Symantec.cloud). Fire fox is “locked” so users would find it difficult to bypass it.
I have a file: '''local-settings.js '''
This is located in: C:\Program Files (x86)\Mozilla Firefox\defaults\pref
The content of this file is:
''pref("general.config.obscure_value", 0); // only needed if you do not want to obscure the content with ROT-13
pref("general.config.filename", "mozilla.cfg");''
I also have the file: called: '''mozilla.cfg'''
This is located: C:\Program Files (x86)\Mozilla Firefox
The contents of this file is:
lockPref("network.proxy.type", 5);
All that is working fine, users can’t easily change the connection settings.
So all that is good and works…
What I would also like to do is set firefox so access is limited to 1 IP address and nothing else is allowed (the whole internet is blocked, except this one IP address).
You suggest using a PAC file - I was unsure how I would use a PAC file, (I have never written one) and do not understand how I would implement one? Please help.

Allow access to only one device through ACS 4.2

Hi All,
I am running ACS4.2 and want to configure a group for access to only specific devices.
I have setup a group in AD and matched this to a group in ACS. Under Network configuration, I've added the device I want the users to access.
In group settings I've added the device under
Network Access Restrictions (NAR)
Is this correct and anything else I should be doing? When logging into the device I get authorisation failed. We have a group already setup for access to all devices which works fine, but I want this second group to be for only one device. Not sure where I'm going wrong with this.
The authentication is all done through AD.
Thanks

Hi,
If I go to Network Configuration there is already a group setup for what looks to be all devices - *.*.*.*
See attached.
I try to add a new group for my single device but it says it overlaps. Am I able to setup more than one group, or how do I configure a second group for just this one device?
Basically at the moment I have an Admin ACS group in AD which has all our admins in it and have access to all devices using *.*.*.*. I now want my restricted AD group to have access to only one device...y.y.y.y but still want the other admins to have access to all devices. Is this easily achieved?
es

Tacacs authentication fails for one user account for only one switch

Hi,
I am having an scenario, where as Tacacs authentication fails for one user account for only one switch.
The same user account works well for other devices.
The AAA configs are same on every devices in the network.
Heres the show tacacs output from the switch where only one user account fails;
              Socket opens:        157
             Socket closes:        156
             Socket aborts:        303
             Socket errors:          1
           Socket Timeouts:          2
   Failed Connect Attempts:          0
        Total Packets Sent:       1703
        Total Packets Recv:       1243
          Expected Replies:          0
What could be the reason ?
No errors on ACS server; same rights had been given to the user account.
Thanks to advise.
Prasey

Hi there,
Does the user get authenticated in the ACS logs?
reports and activity----> failed attempts
ro
reports and activity-----> passed authentications
That will help narrow it down.
Brad

KM only one folder and subject of document

Hi portal gurus,
I am very new to Knowledge Management. I have given an assignment of KM, where in the portal server installed on windows os. I have given a folder location to store the documents related to organisation.
I have created a KM navigation iview and KM upload Iview for this purpose.
The problem here is the documents should be kept in subject wise, when i use the KM upload iview i have n't given any input field for giving the subject of the file. I was given only one folder for storing documents.
The requirement is i want a input field for giving subject of the document in KM upload iview, then the same subject should come as one column for document in KM navigation iview.
i want how this scenario can be best achieved for giving subject for documents while upload and showing the subject in navigation iview.
Thanks
prasad

Hello Prasad,
Have a look at this wiki, https://wiki.sdn.sap.com/wiki/display/KMC/CreatingandMaintainingCustomMetadataPropertiesinthemainscreenofDetailspage
If you do a search for 'KM upload you should get several similar queries as well.
You can then define a predefined property for entering your subject or you could just use the existing description property, see http://help.sap.com/saphelp_nw70/helpdata/en/1a/9a4a3b80f2ec40aa7456bc87a94259/frameset.htm.
After that you can specify your predefined property in the collection renderer of of the layout set used in your iview, see the collection renderer settings link on the above mentioned help page. For more information on this see http://help.sap.com/saphelp_nw70/helpdata/en/87/41389793deac4f92696f38378e56fb/frameset.htm
Regards,
Lorcan.

While copying photos from pc to ipad only one folder gets copied, while copying photos from pc to ipad only one folder gets copied

while copying photos from pc to ipad only one folder gets copied and while trying for other folders, the previous one which copied earlier does not appear.

Are you selecting all of the folders to sync?
Note that if you deselect a folder it will be removed.

HT201250 Is there a way to back up only one folder (with a lot of sub folders) in time machine?

Is there a way to back up only one folder (with a lot of sub folders)

Then I recomend against using Time Machine.
I suggest you check out Carbon Copy Cloner instead.
Personally I see that as a false economy to not back up everything.
Allan

Issue with only one distribution point not able to access only one folder wile PIXE boot

I am facing problem only one distribution point not able to reach perticular folder through network access account, all other DP and other folder are working fine, I already verifiy share and security permission are in place, through <a href="file:///\\041TBVELCMS-001.xyz.ORG\SMSPKGE$\VEL000EA\">\\041TBVELCMS001.xyz.ORG\SMSPKGE$\VEL000EA\</a> 
i am able to reach from network, but while booting from system belongs to perticular DP, it stuck on below folder where fdisk.cmd files are uploded from primery server. pls check below logs and suggest what could be the actual issue.
<spanlang="ENIN">Severity               Type     
Site code             Date / Time        System Component       
Message ID        DescriptionError      Milestone          
CES         1/31/2014 12:32:11 PM  MININT-L670NBC             Task
Sequence Engine   11135    The task sequence execution engine failed executing the action (DiskPart DataDisk) in the group (Install Operating System) with the error code 2147942402  Action output: T=80070047
(e:\nts_sms_fre\sms\framework\tscore\tsconnection.cpp,148) Failed to access the share <a href="file:///\\041TBVELCMS-001.xyz.ORG\SMSPKGE$\VEL000EA\">\\041TBVELCMS-001.xyz.ORG\SMSPKGE$\VEL000EA\</a> with network access account !sAccessibleSource.empty(),
HRESULT=80070002 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,2392) GetAccessibleLocation(pszSource, saResolvedPath, sSourceDirectory, dwFlags, hUserToken), HRESULT=80070002 (e:... [Show more]

The error 80070047 states a msg as "No more connections can be made to this remote computer at this time because there are already as many connection as the computer can accept." Check the share quota if at all any limitations has been provided, if not,
try giving one.. Also, check if any enterprise policy has been applied for the share connections limitations..
bluerail

[SOLVED] Different delete permissions on one folder

My friends ask me to run a server for our small neighborhood, for purposes like files share and things like that.
I learned Here that the user permission to delete any file is inherited only from the "father" folder.
As for the files share, I would like that each user will be able to upload his own files, and while any user will be able to read and download any file (read permission only),
only the owner user will have the ability to delete his own files.
At the moment there is main folder with 777 permissions for everyone, and within it each user opened his own directory.
This way when some files exist in the folder of another user you cannot delete his folder/files.
But this is bad for sorting needs, I want that any user who provide installation file will be able to put it in the "Installations" folder...
Most of the users are using ms-smb client to manage their files through my Samba server, and like that when one attempts to delete another-user's file from the main-full-permissions-for-everyone folder he even not receive that Linux warning: "remove write-protected file ‘file_name’? y"
Is there a way to do that on one directory?
I tried to learn about the ext filesystem "flags" just to find some flag to make the file delete-able only by the root, that not a solution.
Sorry for my bad English, not my native language...
Last edited by Florax (2013-01-27 11:29:14)

Thank you all very much,
I will read that all when I'll got the time, but for my purpose the Sticky Bit thing is very much enough.
Since I think it is very useful for multi-user use of the system, why there is not some simple Arch-Wiki about it?
Or maybe there is, but I am no good in searching?

New Jabber user cannot see (only) one of the added buddies

Running ichat server, just a handful of OD users. OD is on the same machine as Ichat server. Nothing is limiting the use of Ichat by any of the OD users. Server G5 10.4.9, Clients managed Intel Imacs 10.4.9
Added a new user.
New user can add buddies in the Jabber List.
New user can see all but 1 of them in the List.
One of the buddies, lets say UserX, can see the new user in her Jabber List.
No matter what we have tried from within Ichat the new user cannot see UserX.
Both users are members of the same groups and have matching access abilities.
Any suggestions. Thanks for looking at this.

New user can see all but 1 of them in the List.
If I understand it this correctly, 'new user' can see all other buddies except one. And all the other users can see this buddy.
Lets call the new user "userX" and the one they cannot see "userY" and lets call your ichat server "jabber.myserver.com"
The configuration files for users buddylist is stored in the spool di rectorywhich you can find at /var/jabber/spool/. In there you will find a directory the matches the name of your ichat server. For me that is jabber.clayford.com. In this directory you will find one xml file for eash user of ichat server. Their file name is the OD logon name for the server.
Stop the ichat server service and make back up of any files you edit before you start.
Open the file for "userX.xml" In this file you will see some xml code that starts <item jid='[email protected]' subscription='xxxxxx'>. there will be a number of them, one for each buddy.
Mke sure the xxxxxx is the word 'both' [with the quotes] and if the text ask='subscribe' exists in that line before the >,remove it. So that definition should now be: <item jid='[email protected]' subscription='both'>.
Save the file and now open the file userY.xml and check that the item <item jid='[email protected]' subscription='both'> exists.
Restart the ichat server and the problem should be fixed...

Enabling end - user access in Sun One Web Server 6.1 SP2

Hi,
I am new to Sun One Web Server 6.1 SP2 and I can't figure how to enable the end user access so that the end users can change their password.
On iPlanet 6.0 SP2, in the Distributed Admin page, I could enable Distrubuted Administration as well as end user access on the webserver. The end users could then change their own password. I can't find a similar feature in Sun One Web server 6.1 SP2.
Could anyone out there tell me how to get this done?
Thanks in advance!

Hi,
I just found from release notes that End user administration feature (which was under Distributed Administration ) is no longer supported in Sun One Web Server 6.1. [Problem ID 4865295 in release notes]
Could anyone provide a workaround to get over this and allow the end users to change their passwords?
Many thanks in advance,
auporna.

Finder Window is messed up for only one folder. What is going on here?

One of my folder, at the top where it says "Name, Date Modified, Size, Kind", etc. is messed up. Even when I reboot the computer to a different hard drive with 10.8 on it, this particular folder shows this problem.
Above is the problem window on the left and another window on the right that is correct. I tried restarting the Finder but since this is happening on ONLY this folder (that I know of so far) wether booting off of one 10.8 drive or another, I don't know whats up. Clicking on Name or Date Modified or whatever does not sort the list like it should. Changing view options from list to colums and back does not fix it. Any thoughts?

Nevermind. Somebody on the MacRumors forums figured it out. Apparently that folder was set to "Arrange by" something. All I had to do was go to View>Show View Options and set "Arrange by" to None.

User access more than one application

how can i give user access on more than on apex application

>
Welcome to the forum: please read the FAQ and forum sticky threads (if you haven't done so already), and update your forum profile with a real handle instead of "984229".
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
how can i give user access on more than on apex applicationSee +{thread:id=515240}+ for the basic technique, and these Oracle Magazine articles for extended examples:
<li>Creating Custom Authentication
<li>Build a Menu Framework
Note that APEX has a built-in publish-and-subscribe model. You create a "master" application to contain publishable components like authentication schemes, LOVs and templates. Theme templates are created, maintained and published through this application, and other applications reference the standard templates by subscription from the master application. Changes can be pushed out from the master application to all subscribing applications.

[Solved] Dualcore Macbook using only one cpu

Hello,
I have a dual core macbook running Arch, default installation with default kernel (64bit). I just noticed that I only have one cpu running, even when I do some cpu-intensive work. Here is the output of /proc/cpuinfo:
└─■ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz
stepping : 11
cpu MHz : 800.000
cache size : 4096 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm dts tpr_shadow vnmi flexpriority
bogomips : 4391.55
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz
stepping : 11
cpu MHz : 800.000
cache size : 4096 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm dts tpr_shadow vnmi flexpriority
bogomips : 4390.91
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
which shows two cpus registered to the system, but when I do top, I get the following output:
top - 00:29:07 up 7:33, 0 users, load average: 0.05, 0.05, 0.05
Tasks: 93 total, 2 running, 91 sleeping, 0 stopped, 0 zombie
Cpu(s): 9.0%us, 4.1%sy, 0.2%ni, 86.1%id, 0.7%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 4020236k total, 1386244k used, 2633992k free, 53056k buffers
Swap: 0k total, 0k used, 0k free, 826672k cached
Which tells me I only have one cpu. Am I doing something wrong? I have cpufreq-utils and laptop-mode running, but I don't think it should affect this. The following is the output of cpufreq-info
└─■ cpufreq-info
cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009
Report errors and bugs to [email protected], please.
analyzing CPU 0:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0 1
CPUs which need to have their frequency coordinated by software: 0
maximum transition latency: 10.0 us.
hardware limits: 800 MHz - 2.20 GHz
available frequency steps: 2.20 GHz, 2.00 GHz, 1.80 GHz, 1.60 GHz, 1.40 GHz, 1.20 GHz, 800 MHz
available cpufreq governors: ondemand, performance
current policy: frequency should be within 800 MHz and 2.20 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 800 MHz.
analyzing CPU 1:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0 1
CPUs which need to have their frequency coordinated by software: 1
maximum transition latency: 10.0 us.
hardware limits: 800 MHz - 2.20 GHz
available frequency steps: 2.20 GHz, 2.00 GHz, 1.80 GHz, 1.60 GHz, 1.40 GHz, 1.20 GHz, 800 MHz
available cpufreq governors: ondemand, performance
current policy: frequency should be within 800 MHz and 2.20 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 800 MHz.
and it also shows the two cpus, and cpu1 frequency gets higher when I do cpu intensive work, as it should, but cpu0 always stays at 800MHz. Can anybody help me please? Thanks!
Last edited by kcirick (2011-01-24 15:41:21)

Thanks foutrelis. I installed htop and monitored my cpu usage. It seems to be in working order. When I mentioned "cpu intensive work", it turned out that I was talking about something that was using average 50% on both cores, and assumed that meant one was at 100% and the other was 0% (I have conky tell me the average cpu usage).
Marking this as solved. Thanks again!

[SOLVED]User Access To Only One Folder .

Similar Messages

Maybe you are looking for