[Solved] Using diff for directory compare
I'm interested in using diff specifically to verify data integrity; that is, to make sure each file in dirA is data-identical to the corresponding file in dirB. I'm pretty sure it does that, I just want to verify it's not 'assuming identical' if size and timestamps are the same. Thanks.
Last edited by alphaniner (2014-04-09 13:17:16)
Wait, no, that wasn't a sufficient test. Again with only one invocation of 'touch' so the change times are the same:
% touch -amt 201301011234.20 foo/foo bar/foo
% stat bar/foo foo/foo
File: 'bar/foo'
Size: 6 Blocks: 8 IO Block: 4096 regular file
Device: fe01h/65025d Inode: 341815 Links: 1
Access: (0644/-rw-r--r--) Uid: ( 1000/ trent) Gid: ( 100/ users)
Access: 2013-01-01 12:34:20.000000000 -0500
Modify: 2013-01-01 12:34:20.000000000 -0500
Change: 2014-04-09 08:18:44.000000000 -0400
Birth: -
File: 'foo/foo'
Size: 6 Blocks: 8 IO Block: 4096 regular file
Device: fe01h/65025d Inode: 341873 Links: 1
Access: (0644/-rw-r--r--) Uid: ( 1000/ trent) Gid: ( 100/ users)
Access: 2013-01-01 12:34:20.000000000 -0500
Modify: 2013-01-01 12:34:20.000000000 -0500
Change: 2014-04-09 08:18:44.000000000 -0400
Birth: -
% diff -qr foo bar
Files foo/foo and bar/foo differ
Last edited by Trent (2014-04-09 12:16:40)
Similar Messages
-
Using wildcards for String compare
Hello,
I want my prog to find out all Strings which start with the letters 'File'. How can I make a String compare by using wildcards ?
Thanx,
FindusYou may use the String method startsWith to find strings beginning with File. eg. filename.startsWith("File")
for more complicated comparisons you might want to use regular expressions. -
[SOLVED] Use ISO for kernel upgrade?
Wondering if I can use the new ISO to upgrade my kernel, if so maybe a hint or two on how.
See, it's the wifi thing.
It's my only connection to the internet and my Atheros chipset wasn't supported by madwifi 4 weeks ago when I did my install (so I used ndiswrapper). It was however supported in development (I didn't know about madwifi-svn or anything-svn at the time). I'm hoping maybe I can use the new ISO to do the upgrade and maybe the madwifi on the ISO will also work and I can do all of this before internet withdrawals kick in. I do have Puppylinux on a usb and the wifi works with that, so if I desperately need a fix (a quick google search and... aaahhh) there is that.
If this won't work then what?
I just looked at the pacman man page and didn't see any way to download but not install a package (unless I missed it, if I did just say so, I'll look until I find it). All I can think of is find the drivers for my ethernet card (really surprised that wasn't supported out of the box) go to the library and hopefully get everything done before they close (I'm a noob, it takes me an hour to find my ass with both hands).
Last edited by hobonix (2009-02-19 02:57:48)hobonix wrote:Thank you, pacman -Sw (emacs can do a lot but it doesn't always do those things well, woman is hard to read sometimes)
1.) Unix design principles say do one thing and do it well! *bites emacs, then runs*
2.) Don't I know it.
hobonix wrote:No, those modules didn't work, a google search showed a post from one of the madwifi's devs that he had just got my particular chipset to work a couple of days before so probably madwifi-svn will work now (hell, it might have worked at the time I just didn't know about it).
Oh, okay. Good luck
hobonix wrote:Thank you again (nice doggy).
*eyes reproachfully* Wolf. -
[SOLVED] using squid for local cache and configuring firefox
Hi, I have just installed squid following the instructions at http://wiki.archlinux.org/index.php/Squid and can run squidclient to retrieve webpages. The headers include
X-Cache: HIT from localhost.localdomain
X-Cache-Lookup: HIT from localhost.localdomain:3128
which I take to mean the cache is working? Next I want firefox to use the proxy, but changing the settings in Edit/Preferences/Advanced/Network/Settings to localhost or 127.0.0.1 and 3128 doesn't work. Firefox can't see the proxy for some reason. I have set
http_access allow all
in the conf for now. How do I get firefox to use squid?
TIA
Last edited by jaybee (2010-07-09 13:22:52)It seems that entering 'localhost' rather than 'http://localhost' was what I needed.
-
[solved]use aria2c for downloader in pacman
hello
I sort my mirrorlist by reflector & now the first three of them are ftp & I don't now how can I use aria2c?
whould you help me?
Last edited by MHALAH152 (2013-05-21 15:07:26)Wiki's commmand:
XferCommand = /usr/bin/aria2c --allow-overwrite=true -c --file-allocation=none --log-level=error -m2 --max-connection-per-server=2 --max-file-not-found=5 --min-split-size=5M --no-conf --remote-time=true --summary-interval=60 -t5 -d / -o %o %u
OP's command:
XferCommand = /usr/bin/aria2c --allow-overwrite=true -c --file-allocation=none --log-level=error -x16 --max-file-not-found=5 -k1M --no-conf -R=true --summary-interval=60 -t5 -d / -o %o %u/
If the OP would have just looked in the wiki then, this whole thread could have been avoided. I suspect that he/she just copy and pasted it before anyway, which is why I suggested reading the man page to figure out what was actually being opted for. -
What r the diff. error that can be solved using RSRV tcode?
Hi ,
what r the diff. error that can be solved using RSRV tcode?
I want to know all the errors that can be solved using RSRV t code
if any body is having good document regarding RSRV please send it to me at
<u><b>[email protected]</b></u>
Thanx in advance,
ravi.Hi,
Refer the below links for more details about RSRV TCODE.
/community [original link is broken]
http://help.sap.com/saphelp_nw04/helpdata/en/92/1d733b73a8f706e10000000a11402f/frameset.htm
it's for bw objects consistency analysis and repair.
from transaction code RSRV doc itself :
Transaction RSRV: BW Data and Metadata Test and Repair Environment.
Transaction RSRV checks the consistency of data stored in BW. It mostly examines the foreign key relationships between individual tables in the enhanced star schema of the BW system.
The transaction interface was re-designed for SAP Portals release 3.0A. A brief guide about how to use the transaction follows.
Starting the Transaction
You can reach the test and repair environment
By entering the transaction code RSRV
From InfoObject maintenance (Transaction RSD1)
By clicking on the "Analyze" button in the intial screen.
After selecting a characteristic in the maintenance screen via the "Processing -> Analyze InfoObject" menu option.
The Initial Screen
When using the test and repair environment for the first time, the message "Values were not found for all setting parameters" draws your attention to the fact that there aren't any saved settings for your user.
After confirming the dialog box, you reach the initial screen of the transaction. This is divided into two parts:
1. On the left-hand side, you can see a tree structure with the pool of available tests.
2. The right-hand side is empty at first. The tests you have selected will be put here. A selection of tests is called a Test Package here.
Combined and Elementary Tests
An Elementary Test is a test that cannot be divided into smaller tests and that can therefore only be executed as a whole.
In this regard, a Combined Test determines which elementary tests are to be executed after entering the parameters. You can remove individual elementary tests from the test package before carrying out the actual test run, in order to reduce run time, for example.
Combining a Test Package and Executing it.
Firstly select one or more tests with drag&drop or by double-clicking. Each selected test appears as a closed folder in the view of your test package. (An exception is elementary tests without parameters: These do not appear as a folder). You can also drag a whole folder of tests from the test pool across to the right-hand screen area; all tests that are located in the hierarchical structure under this folder are then added to the test package. You can also display a short description of the test, if required. Do this right-clicking on a test and choosing "Description" from the context menu.
Afterwards, you must supply the tests with parameters. Tests without parameters must not be given parameters. You are given notification of this when selecting them. You can enter parameters by double-clicking on a test (or a test package) or by expanding the folder of the test.
A dialog box appears in which you must enter the required parameters. Input help is often available. After entering the parameters, a folder with the name "Parameter" is added under the test. This contains the parameter values. The test name can change in some circumstances, enabling you to see at first sight for which parameter values the test is to be executed. It is possible to select the same test several times and give it different parameters, which may even be preferable in some situations. When you have supplied the combined test with parameters, the folder with the name "Elementary Tests" is added under this one. It contains the elementary tests, from which the combined test is built. You can delete individual elementary tests in the test pool using drag & drop.
After supplying all tests with parameters, you can start the test run by clicking on the "Execution" button. After execution, the test icons change from a gray rhombus to a red, yellow or green one, depending on whether the test had errors, warnings or was error-free.
Test Results
The test results are written to the application log. Depending on the settings, the system jumps automatically to this display, or you can reach it by clicking on the "Display" button. The results are saved in the database, and can therefore be compared later with additional test runs.
In the left-hand side of the window, you can see an overview of the most recent test runs. Double-clicking on a folder displays all messages under these nodes as a flat (non-hierarchical) list in the right-hand screen area. Long texts or detail data may be available for individual messages, which can be displayed with a mouse click.
Repairs
Some tests can repair inconsistencies and errors. Automatic correction is generally not possible: If entries are missing from the SID table for a characteristic, in which case the lost SIDs are still being used in a dimension table (and the corresponding dimension keys are still being used in the fact table) of an InfoCube, you can only remove the inconsistency by reloading the transaction data of the InfoCube. Also note that you must make repairs in the correct sequence. You must always read the documentation for the test and have a good idea about how the error occured, before making the repairs.
After executing the test run, go from the application log back to the initial screen to make these repairs. Click on the "Fix Errors" button to start an error run. Since the dataset could have changed between the test and the repair run, the required tests are executed again before the actual repair. The results can be found in the application log once again.
Test Packages
The test package is deleted if you do not save the test package in the display before leaving the test environment. Choose "Test Packages -> Save Test Package" in the option menu. You can do the following via options in the "Test Package" menu:
Load packages
Load for processing - the package is then locked against changes by others.
Delete and
Schedule execution at a later date or at regular intervals in background processing
Settings
In the "Settings" menu option, you can make settings (adjust the size of the screen areas, for example) and save them. The settings are automatically read when starting the test environment. Support packages are being delivered with additional settings options since the test environment is under development at the moment. A message notifies the user at the start if there aren't any values for the setting options.
Jobs Menu Option
You can access the job overview via the Jobs -> Job Overview menu. Use this when you want to check the status of a test package you have scheduled.
Application Log Menu Option
You can display old logs from previous test runs in the dialog box, as well as scheduled ones. The option of deleting test logs can also be found here.
New Selection Button
The currently selected test package is deleted when you press this button.
Filter Button
After a test run, click on this button to remove all elementary tests without errors or warnings from the test package.
Executing Test Packages in Process Chains
You can add a process chain to the ABAP Programm RSRV_JOB_RUNNER in the process chain maintenance transaction, RSPC. To do this, use drag & drop to select the process type "ABAP Program" under "General Services" in the process type view. When maintaining process variants you will be asked for the program name and a program variant. Enter RSRV_JOB_RUNNER for the program name. Choose a program variant name and click on "Change". In the next screen you are able to either change or display an already existing variant, or create a new variant. When creating a new variant you will be asked for the following: Package name (an imput help on this is available), the detail level for the log to which the RSRV log in the process chain log is to be integrated, and a message type severity at which process chain processing should be terminated.
The RSRV process log in the process chain is built as follows:
First is a summary specifying whether errors, warnings, or no errors occurred for each elementary test.
A log view of the RSRV test package at the specified detail level follows.
Example: If you choose the value '3' for the detail level, only messages up to and including detail level 3 will be included in the log processes for the process chain. Messages occuring at a lower layer of the test package test are not displayed in this log. Please note that, unlike the application log, the process log does not propagate errors from deep detail levels to low detail levels. For example, if a single detail level 4 error occurs the summary will show that the relevant test delivered an error. However, this error will not be listed in the second part of the log.
A complete log is always written independantly of the RSRV process log in the process chain. You can view this in the menu option "Application Log->Display Log->From Batch".
Please note that there is currently no transport object for test packages and that consequently these cannot be transported. Process chains that execute RSRV test packages must therefore be manually postprocessed after a transport to a different system: The relevant test packages must be created.
Hope This Helps,
This is already there in SDN.
Regards,
rik -
[SOLVED] Getting freezes after using dwm for some time and exiting it
Hello, I have an Asus Ux51, with a fresh (less than a month) arch installation. If I recall correctly I had a couple of freezes in other occasions but I don't remember much about those so I rather focus on the only freeze I can more or less reproduce and I've been having lately. After using dwm for some time with a couple of programs opened (rTorrent, browser, and some terminals for instance), if I close dwm or just press the power button to shut down, it starts closing everything and either stays with a black screen, or hangs while X prints the log information. It's not always though, for example, if I just boot it, open dwm and close it without giving it much use it usually closes fine.
Tried googling a bit to see the usual ways to troubleshoot this but didn't get really far.
This is my /var/log/Xorg.0.log
[ 7.573]
X.Org X Server 1.14.2
Release Date: 2013-06-25
[ 7.573] X Protocol Version 11, Revision 0
[ 7.573] Build Operating System: Linux 3.9.7-1-ARCH x86_64
[ 7.574] Current Operating System: Linux arch 3.10.3-1-ARCH #1 SMP PREEMPT Fri Jul 26 11:26:59 CEST 2013 x86_64
[ 7.574] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=74e92d67-41b6-4911-8ceb-009ae8c9cdab ro quiet add_efi_memmap i915.i915_enable_rc6=1 pcie_aspm=force drm.vblankoffdelay=1 i915.semaphores=1 "acpi_osi=!Windows 2012"
[ 7.574] Build Date: 01 July 2013 10:48:42AM
[ 7.574]
[ 7.574] Current version of pixman: 0.30.0
[ 7.574] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 7.574] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 7.574] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 10 19:08:34 2013
[ 7.574] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 7.575] (==) No Layout section. Using the first Screen section.
[ 7.575] (==) No screen section available. Using defaults.
[ 7.575] (**) |-->Screen "Default Screen Section" (0)
[ 7.575] (**) | |-->Monitor "<default monitor>"
[ 7.575] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 7.575] (==) Automatically adding devices
[ 7.575] (==) Automatically enabling devices
[ 7.575] (==) Automatically adding GPU devices
[ 7.578] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 7.578] Entry deleted from font path.
[ 7.578] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 7.578] Entry deleted from font path.
[ 7.578] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 7.578] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 7.578] Entry deleted from font path.
[ 7.578] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 7.578] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/
[ 7.578] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 7.578] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 7.578] (II) Loader magic: 0x7fdc20
[ 7.578] (II) Module ABI versions:
[ 7.578] X.Org ANSI C Emulation: 0.4
[ 7.578] X.Org Video Driver: 14.1
[ 7.578] X.Org XInput driver : 19.1
[ 7.578] X.Org Server Extension : 7.0
[ 7.578] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 7.579] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 7.580] (--) PCI:*(0:0:2:0) 8086:0166:1043:15a7 rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 7.580] (--) PCI: (0:1:0:0) 10de:0fd1:1043:15a7 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 7.580] Initializing built-in extension Generic Event Extension
[ 7.580] Initializing built-in extension SHAPE
[ 7.580] Initializing built-in extension MIT-SHM
[ 7.580] Initializing built-in extension XInputExtension
[ 7.580] Initializing built-in extension XTEST
[ 7.580] Initializing built-in extension BIG-REQUESTS
[ 7.580] Initializing built-in extension SYNC
[ 7.580] Initializing built-in extension XKEYBOARD
[ 7.580] Initializing built-in extension XC-MISC
[ 7.580] Initializing built-in extension SECURITY
[ 7.580] Initializing built-in extension XINERAMA
[ 7.580] Initializing built-in extension XFIXES
[ 7.580] Initializing built-in extension RENDER
[ 7.581] Initializing built-in extension RANDR
[ 7.581] Initializing built-in extension COMPOSITE
[ 7.581] Initializing built-in extension DAMAGE
[ 7.581] Initializing built-in extension MIT-SCREEN-SAVER
[ 7.581] Initializing built-in extension DOUBLE-BUFFER
[ 7.581] Initializing built-in extension RECORD
[ 7.581] Initializing built-in extension DPMS
[ 7.581] Initializing built-in extension X-Resource
[ 7.581] Initializing built-in extension XVideo
[ 7.581] Initializing built-in extension XVideo-MotionCompensation
[ 7.582] Initializing built-in extension XFree86-VidModeExtension
[ 7.583] Initializing built-in extension XFree86-DGA
[ 7.583] Initializing built-in extension XFree86-DRI
[ 7.584] Initializing built-in extension DRI2
[ 7.584] (II) LoadModule: "glx"
[ 7.585] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 7.586] (II) Module glx: vendor="X.Org Foundation"
[ 7.586] compiled for 1.14.2, module version = 1.0.0
[ 7.586] ABI class: X.Org Server Extension, version 7.0
[ 7.586] (==) AIGLX enabled
[ 7.587] Loading extension GLX
[ 7.587] (==) Matched intel as autoconfigured driver 0
[ 7.587] (==) Matched nouveau as autoconfigured driver 1
[ 7.587] (==) Matched nvidia as autoconfigured driver 2
[ 7.587] (==) Matched nv as autoconfigured driver 3
[ 7.587] (==) Matched intel as autoconfigured driver 4
[ 7.587] (==) Matched vesa as autoconfigured driver 5
[ 7.587] (==) Matched modesetting as autoconfigured driver 6
[ 7.587] (==) Matched fbdev as autoconfigured driver 7
[ 7.587] (==) Assigned the driver to the xf86ConfigLayout
[ 7.587] (II) LoadModule: "intel"
[ 7.588] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 7.592] (II) Module intel: vendor="X.Org Foundation"
[ 7.592] compiled for 1.14.2, module version = 2.21.12
[ 7.592] Module class: X.Org Video Driver
[ 7.592] ABI class: X.Org Video Driver, version 14.1
[ 7.592] (II) LoadModule: "nouveau"
[ 7.592] (WW) Warning, couldn't open module nouveau
[ 7.592] (II) UnloadModule: "nouveau"
[ 7.592] (II) Unloading nouveau
[ 7.592] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 7.592] (II) LoadModule: "nvidia"
[ 7.592] (WW) Warning, couldn't open module nvidia
[ 7.592] (II) UnloadModule: "nvidia"
[ 7.592] (II) Unloading nvidia
[ 7.592] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 7.592] (II) LoadModule: "nv"
[ 7.592] (WW) Warning, couldn't open module nv
[ 7.592] (II) UnloadModule: "nv"
[ 7.592] (II) Unloading nv
[ 7.592] (EE) Failed to load module "nv" (module does not exist, 0)
[ 7.592] (II) LoadModule: "vesa"
[ 7.593] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 7.593] (II) Module vesa: vendor="X.Org Foundation"
[ 7.593] compiled for 1.14.0, module version = 2.3.2
[ 7.593] Module class: X.Org Video Driver
[ 7.593] ABI class: X.Org Video Driver, version 14.1
[ 7.593] (II) LoadModule: "modesetting"
[ 7.593] (WW) Warning, couldn't open module modesetting
[ 7.593] (II) UnloadModule: "modesetting"
[ 7.593] (II) Unloading modesetting
[ 7.593] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 7.593] (II) LoadModule: "fbdev"
[ 7.593] (WW) Warning, couldn't open module fbdev
[ 7.593] (II) UnloadModule: "fbdev"
[ 7.593] (II) Unloading fbdev
[ 7.593] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 7.593] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
HD Graphics 4600, Iris(TM) Pro Graphics 5200,
Haswell CRW Server (GT1), Haswell CRW Server (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, ValleyView PO board
[ 7.594] (II) VESA: driver for VESA chipsets: vesa
[ 7.594] (++) using VT number 1
[ 7.594] (WW) Falling back to old probe method for vesa
[ 7.594] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 7.594] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 7.594] (==) intel(0): RGB weight 888
[ 7.594] (==) intel(0): Default visual is TrueColor
[ 7.594] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[ 7.594] (**) intel(0): Relaxed fencing enabled
[ 7.594] (**) intel(0): Wait on SwapBuffers? enabled
[ 7.594] (**) intel(0): Triple buffering? enabled
[ 7.594] (**) intel(0): Framebuffer tiled
[ 7.594] (**) intel(0): Pixmaps tiled
[ 7.594] (**) intel(0): 3D buffers tiled
[ 7.594] (**) intel(0): SwapBuffers wait enabled
[ 7.594] (==) intel(0): video overlay key set to 0x101fe
[ 7.594] (II) intel(0): Output eDP1 has no monitor section
[ 7.595] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
[ 7.596] (II) intel(0): Output VGA1 has no monitor section
[ 7.596] (II) intel(0): EDID for output eDP1
[ 7.596] (II) intel(0): Manufacturer: LGD Model: 323 Serial#: 0
[ 7.596] (II) intel(0): Year: 2012 Week: 0
[ 7.596] (II) intel(0): EDID Version: 1.4
[ 7.596] (II) intel(0): Digital Display Input
[ 7.596] (II) intel(0): 6 bits per channel
[ 7.596] (II) intel(0): Digital interface is DisplayPort
[ 7.596] (II) intel(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 7.596] (II) intel(0): Gamma: 2.20
[ 7.596] (II) intel(0): No DPMS capabilities specified
[ 7.596] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 7.596] (II) intel(0): First detailed timing is preferred mode
[ 7.596] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 7.596] (II) intel(0): redX: 0.629 redY: 0.350 greenX: 0.349 greenY: 0.614
[ 7.596] (II) intel(0): blueX: 0.154 blueY: 0.112 whiteX: 0.313 whiteY: 0.329
[ 7.596] (II) intel(0): Manufacturer's mask: 0
[ 7.596] (II) intel(0): Supported detailed timing:
[ 7.596] (II) intel(0): clock: 138.0 MHz Image Size: 345 x 194 mm
[ 7.596] (II) intel(0): h_active: 1920 h_sync: 1952 h_sync_end 1988 h_blank_end 2088 h_border: 0
[ 7.596] (II) intel(0): v_active: 1080 v_sync: 1085 v_sync_end 1090 v_blanking: 1102 v_border: 0
[ 7.596] (II) intel(0): LG Display
[ 7.596] (II) intel(0): LP156WF4-SPB1
[ 7.596] (II) intel(0): EDID (in hex):
[ 7.596] (II) intel(0): 00ffffffffffff0030e4230300000000
[ 7.596] (II) intel(0): 00160104952313780a25b5a159599d27
[ 7.596] (II) intel(0): 1c505400000001010101010101010101
[ 7.596] (II) intel(0): 010101010101e83580a8703816402024
[ 7.596] (II) intel(0): 550059c2100000180000000000000000
[ 7.596] (II) intel(0): 00000000000000000000000000fe004c
[ 7.596] (II) intel(0): 4720446973706c61790a2020000000fe
[ 7.596] (II) intel(0): 004c503135365746342d535042310069
[ 7.596] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 7.597] (II) intel(0): Printing probed modes for output eDP1
[ 7.597] (II) intel(0): Modeline "1920x1080"x60.0 138.00 1920 1952 1988 2088 1080 1085 1090 1102 -hsync -vsync (66.1 kHz eP)
[ 7.597] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 7.597] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 7.597] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 7.597] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 7.597] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 7.597] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 7.597] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 7.598] (II) intel(0): EDID for output VGA1
[ 7.598] (II) intel(0): Output eDP1 connected
[ 7.598] (II) intel(0): Output VGA1 disconnected
[ 7.598] (II) intel(0): Using exact sizes for initial modes
[ 7.598] (II) intel(0): Output eDP1 using initial mode 1920x1080
[ 7.598] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 7.598] (II) intel(0): Kernel page flipping support detected, enabling
[ 7.598] (==) intel(0): DPI set to (96, 96)
[ 7.598] (II) Loading sub module "fb"
[ 7.598] (II) LoadModule: "fb"
[ 7.598] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 7.599] (II) Module fb: vendor="X.Org Foundation"
[ 7.599] compiled for 1.14.2, module version = 1.0.0
[ 7.599] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7.599] (II) Loading sub module "dri2"
[ 7.599] (II) LoadModule: "dri2"
[ 7.599] (II) Module "dri2" already built-in
[ 7.599] (II) UnloadModule: "vesa"
[ 7.599] (II) Unloading vesa
[ 7.599] (==) Depth 24 pixmap format is 32 bpp
[ 7.599] (II) intel(0): [DRI2] Setup complete
[ 7.599] (II) intel(0): [DRI2] DRI driver: i965
[ 7.599] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled
[ 7.599] (II) UXA(0): Driver registered support for the following operations:
[ 7.599] (II) solid
[ 7.599] (II) copy
[ 7.599] (II) composite (RENDER acceleration)
[ 7.599] (II) put_image
[ 7.599] (II) get_image
[ 7.599] (==) intel(0): Backing store disabled
[ 7.599] (==) intel(0): Silken mouse enabled
[ 7.600] (II) intel(0): Initializing HW Cursor
[ 7.600] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 7.600] (==) intel(0): DPMS enabled
[ 7.600] (==) intel(0): Intel XvMC decoder enabled
[ 7.600] (II) intel(0): Set up textured video
[ 7.600] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 7.600] (II) intel(0): direct rendering: DRI2 Enabled
[ 7.600] (==) intel(0): hotplug detection: "enabled"
[ 7.613] (--) RandR disabled
[ 7.634] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 7.634] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 7.634] (II) AIGLX: enabled GLX_ARB_create_context
[ 7.634] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 7.634] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 7.634] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 7.634] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 7.634] (II) AIGLX: Loaded and initialized i965
[ 7.634] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 7.634] (II) intel(0): Setting screen physical size to 508 x 285
[ 7.669] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 7.669] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 7.669] (II) LoadModule: "evdev"
[ 7.669] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 7.670] (II) Module evdev: vendor="X.Org Foundation"
[ 7.670] compiled for 1.14.2, module version = 2.8.1
[ 7.670] Module class: X.Org XInput Driver
[ 7.670] ABI class: X.Org XInput driver, version 19.1
[ 7.670] (II) Using input driver 'evdev' for 'Video Bus'
[ 7.670] (**) Video Bus: always reports core events
[ 7.670] (**) evdev: Video Bus: Device: "/dev/input/event9"
[ 7.670] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 7.670] (--) evdev: Video Bus: Found keys
[ 7.670] (II) evdev: Video Bus: Configuring as keyboard
[ 7.670] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input10/event9"
[ 7.670] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 7.670] (**) Option "xkb_rules" "evdev"
[ 7.670] (**) Option "xkb_model" "pc104"
[ 7.670] (**) Option "xkb_layout" "us"
[ 7.684] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 7.684] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 7.684] (II) Using input driver 'evdev' for 'Video Bus'
[ 7.684] (**) Video Bus: always reports core events
[ 7.684] (**) evdev: Video Bus: Device: "/dev/input/event8"
[ 7.684] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 7.684] (--) evdev: Video Bus: Found keys
[ 7.684] (II) evdev: Video Bus: Configuring as keyboard
[ 7.684] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input9/event8"
[ 7.684] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 7.684] (**) Option "xkb_rules" "evdev"
[ 7.684] (**) Option "xkb_model" "pc104"
[ 7.684] (**) Option "xkb_layout" "us"
[ 7.684] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 7.685] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7.685] (II) Using input driver 'evdev' for 'Power Button'
[ 7.685] (**) Power Button: always reports core events
[ 7.685] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 7.685] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 7.685] (--) evdev: Power Button: Found keys
[ 7.685] (II) evdev: Power Button: Configuring as keyboard
[ 7.685] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 7.685] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 7.685] (**) Option "xkb_rules" "evdev"
[ 7.685] (**) Option "xkb_model" "pc104"
[ 7.685] (**) Option "xkb_layout" "us"
[ 7.685] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 7.685] (II) No input driver specified, ignoring this device.
[ 7.685] (II) This device may have been added with another device file.
[ 7.685] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 7.685] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 7.685] (II) Using input driver 'evdev' for 'Sleep Button'
[ 7.685] (**) Sleep Button: always reports core events
[ 7.685] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 7.685] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 7.685] (--) evdev: Sleep Button: Found keys
[ 7.685] (II) evdev: Sleep Button: Configuring as keyboard
[ 7.685] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 7.685] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 7.685] (**) Option "xkb_rules" "evdev"
[ 7.685] (**) Option "xkb_model" "pc104"
[ 7.685] (**) Option "xkb_layout" "us"
[ 7.685] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 7.685] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 7.686] (II) config/udev: Adding input device USB2.0 HD UVC WebCam (/dev/input/event6)
[ 7.686] (**) USB2.0 HD UVC WebCam: Applying InputClass "evdev keyboard catchall"
[ 7.686] (II) Using input driver 'evdev' for 'USB2.0 HD UVC WebCam'
[ 7.686] (**) USB2.0 HD UVC WebCam: always reports core events
[ 7.686] (**) evdev: USB2.0 HD UVC WebCam: Device: "/dev/input/event6"
[ 7.686] (--) evdev: USB2.0 HD UVC WebCam: Vendor 0x4f2 Product 0xb36e
[ 7.686] (--) evdev: USB2.0 HD UVC WebCam: Found keys
[ 7.686] (II) evdev: USB2.0 HD UVC WebCam: Configuring as keyboard
[ 7.686] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input6/event6"
[ 7.686] (II) XINPUT: Adding extended input device "USB2.0 HD UVC WebCam" (type: KEYBOARD, id 10)
[ 7.686] (**) Option "xkb_rules" "evdev"
[ 7.686] (**) Option "xkb_model" "pc104"
[ 7.686] (**) Option "xkb_layout" "us"
[ 7.686] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event5)
[ 7.686] (II) No input driver specified, ignoring this device.
[ 7.686] (II) This device may have been added with another device file.
[ 7.686] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 7.686] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 7.686] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 7.686] (**) AT Translated Set 2 keyboard: always reports core events
[ 7.686] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 7.686] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 7.686] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 7.686] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 7.686] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 7.686] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 7.686] (**) Option "xkb_rules" "evdev"
[ 7.686] (**) Option "xkb_model" "pc104"
[ 7.686] (**) Option "xkb_layout" "us"
[ 7.686] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event7)
[ 7.686] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 7.686] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 7.687] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 7.687] (II) LoadModule: "synaptics"
[ 7.687] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 7.687] (II) Module synaptics: vendor="X.Org Foundation"
[ 7.687] compiled for 1.14.1, module version = 1.7.1
[ 7.687] Module class: X.Org XInput Driver
[ 7.687] ABI class: X.Org XInput driver, version 19.1
[ 7.687] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 7.687] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 7.687] (**) Option "Device" "/dev/input/event7"
[ 7.810] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3260 (res 32)
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2119 (res 32)
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 7.810] (**) Option "TapButton1" "1"
[ 7.810] (**) Option "TapButton2" "2"
[ 7.810] (**) Option "TapButton3" "3"
[ 7.810] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 7.810] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 7.853] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input8/event7"
[ 7.853] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12)
[ 7.853] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 7.853] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 7.853] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.051
[ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 7.853] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 7.853] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 7.853] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 7.853] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 7.853] (II) No input driver specified, ignoring this device.
[ 7.853] (II) This device may have been added with another device file.
Found this recent thread in the forums, I'll give REISUB a try late, but the times it freezed I remember trying to blindly reboot it, or switching off virtual console and couldn't.
In case it's of any use, this is my # uname -a
Linux arch 3.10.3-1-ARCH #1 SMP PREEMPT Fri Jul 26 11:26:59 CEST 2013 x86_64 GNU/Linux
Could it have something to do with the nvidia optimus setup that this laptop has? When installing arch I found out that there was no support yet for it so I'm just using the intel drivers (following what the arch wiki said).
Any ideas or advice to point me in the right direction would be very much appreciated.
Thanks in advance.
Last edited by contiver (2013-08-16 20:25:34)I don't start st in my .xinitrc. I launch it from dmenu and usually everything is fine. If I launch it from dwm's internal command using Alt-Shf-Return, X freezes 100% of the time. A workaround was suggested by st's main developer to call st like this:
static const char *termcmd[] = { "/bin/sh", "-c", "st", NULL };
but it didn't work for me.
Very rarely X will freeze anyway. I haven't been able to pin it down. When X fails, my journal returns this:
BUG: unable to handle kernel paging request at ffffc90014ce8000
IP: [<ffffffff812bfe7f>] bitfill_aligned+0x8f/0x140
PGD 7c00b067 PUD 7c018067 PMD 7b3eb067 PTE 0
Oops: 0002 [#1] PREEMPT SMP
Modules linked in: nls_cp437 vfat fat snd_usb_audio snd_usbmidi_lib snd_hwdep snd_rawmidi snd_seq_device snd_pcm snd_page_alloc snd_timer
CPU: 1 PID: 7520 Comm: X Not tainted 3.10.5-1-ck #1
Hardware name: /D410PT, BIOS MOPNV10N.86A.0155.2009.1106.0430 11/06/2009
task: ffff88007aa786b0 ti: ffff8800797ee000 task.ti: ffff8800797ee000
RIP: 0010:[<ffffffff812bfe7f>] [<ffffffff812bfe7f>] bitfill_aligned+0x8f/0x140
RSP: 0018:ffff8800797efaa8 EFLAGS: 00010212
RAX: 0000000003ffff5c RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000003ffff5c RSI: ffffc90014901520 RDI: ffffc90014ce7fe0
RBP: ffff8800797efab8 R08: 00000000ffffd700 R09: 0000000003f83204
R10: 0000000000000000 R11: ffffc90014ce7fd8 R12: ffffffffffffffff
R13: ffffc90014901520 R14: ffffffff812bfdf0 R15: 0000000000000320
FS: 00007fb350033880(0000) GS:ffff88007ea80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: ffffc90014ce8000 CR3: 000000007b104000 CR4: 00000000000007e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Stack:
0000000000000000 ffff88007a4d3000 ffff8800797efb28 ffffffff812bfbb9
ffffffff00000000 ffff88007c00c000 0000000000000000 ffffffff8186f240
0000000000000000 ffffffff00000006 ffffd700797efb58 ffff88007a4d3000
Call Trace:
[<ffffffff812bfbb9>] cfb_fillrect+0x1c9/0x400
[<ffffffff812ba2e5>] bit_clear_margins+0x165/0x190
[<ffffffff812b3633>] fbcon_clear_margins+0x63/0x90
[<ffffffff812b7a9f>] fbcon_switch+0x3df/0x570
[<ffffffff813200bd>] redraw_screen+0x17d/0x240
[<ffffffff812b6eeb>] fbcon_blank+0x20b/0x2d0
[<ffffffff81320767>] do_unblank_screen+0xa7/0x1b0
[<ffffffff813175d1>] vt_ioctl+0x10d1/0x1170
[<ffffffff8130b407>] tty_ioctl+0x277/0xb90
[<ffffffff8118fb21>] ? mntput_no_expire+0x41/0x150
[<ffffffff81183a3e>] do_vfs_ioctl+0x2de/0x4c0
[<ffffffff8117328e>] ? ____fput+0xe/0x10
[<ffffffff8107766c>] ? task_work_run+0x9c/0xe0
[<ffffffff81183ca3>] SyS_ioctl+0x83/0xa0
[<ffffffff814bab9d>] system_call_fastpath+0x1a/0x1f
Code: 08 45 01 d8 31 d2 44 89 c0 41 f7 f1 83 f8 07 89 c2 76 4f 44 8d 08 48 8d 3e 0f 1f 00 4c 89 17 4c 89 57 08 4c 89 57 10 4c 89 57 18 <4
RIP [<ffffffff812bfe7f>] bitfill_aligned+0x8f/0x140
RSP <ffff8800797efaa8>
CR2: ffffc90014ce8000
---[ end trace aff6cb5ad5097aef ]--- -
Dear all,
I am looking to setup the use of active directory userid/password authentication instead of SAP R/3 User/Password for digital signature. We SSO to the backened ABAP AS via an SAP NW Portal to which SPNEgo kerberos authentication is setup. Today we specify R3 user id/password to digitally approvae a lot release. The idea is to have users maintain one AD password and don't have to remember the R/3 password anymore and also our Security team to avoid password maintenance.
I know there are 3 options for digital signature and
System signature with authorization by user ID and password (We use this currently)
Digital User signature with verification - (We would like to use this with AD userid/password, so the system still ask the users their AD userid/password for the authentication when they try to "sign" a document.)
User signature without verification
Do you think there is a way to configure the system in order to ask and check the active directory userid/password instead of SAP R/3 password? Where can I found documentation about it ?
I have several different versions of AS ABAP starting from NW 7.02 to NW 7.31.
My active directory is based on Windows 2008.
Thanks in advance!!
DheeActually enabling Kerberos for SSO purposes and enabling Kerberos for digital signatures are two different topics although the latter is because of the former. I'm interested in the topic as well and I'm currently looking at different options. SAP provides a BAdI for the digital signature API which can be used for external authentication but they do not provide the solution to invoke Kerberos authentication based on username and password. SAP provides a semi solution with NWSSO 2.0 SP2 which works only on Windows with classic dynpros meaning SAP GUI for Windows is assumed. The solution is based on an ActiveX component which does the actual Kerberos authentication using the Secure Login Client which is part of the NWSSO suite. Extending that implementation to non-Windows and non-GUI applications would require some sort of web enabled service that could be used to authenticate the user with username and password. In case authentication is successful, a Kerberos token would be returned to SAP which would then be validated. All the required pieces are there since SAP has Kerberos support now in both stacks of the NetWeaver Application Server, some bits are still missing though which leaves customers looking at 3rd party or custom solutions.
-
Hi,
I've managed to configure my farm so that Microsoft Online Directory Services (Office 365 etc.) can be used for STS authentication, but what I'm actually trying to do is allow user authentication - that is, I'm hoping to be able to use the user's
O365 credentials to authenticate them in my own farm so they can view certain parts of it. If I need to write my own login form or authentication provider or whatever that's fine, as long as the user doesn't need to enter anything when they access my farm
(provided they already have cached O365 credentials in their browser session).
FWIW I actually need to be able to support the possibility that users are coming from multiple O365 tenancies, whereby each site collection will be configured to allow users from a different O365 tenancy (more or less).
If it's not possible to do with my own development farm on a PC, it is possible if the farm is hosted in Azure?
Thanks
DylanHi Dylan,
According to your description, my understanding is that you want to use Microsoft Online Directory Services as a user authentication provider for your SharePoint farm.
For your demand, you can configure a hybrid topology for your SharePoint farm:
http://technet.microsoft.com/en-us/library/jj838715(v=office.15).aspx
http://technet.microsoft.com/en-us/library/dn197168(v=office.15).aspx
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support -
Install Sun ONE Directory Server 5,2 & how to use it for authenticate user
Good afternoon, Excuse, are newbie in the scope I am learning and putting desire to him, this in my situation I am trying to install Sun ONE Directory Server 5,2 since I understand that this it is application LDAP for Solaris, ok I want to install it to authenticate user against the system, that is to say, to be able to acces the server entering with a created user from the data base of LDAP and make think user that his created in the system. But the documentation that I finds indicates the installation of Sun ONE Directory Server 5,2 but it not clearly about how to use it for authentication. Some one have any manual step by step of Sun ONE Directory Server 5,2 installation and how to make it for authentication systems users.
I read the forum seeking for anwser and i get confuse
Thanks for the help and sorry for any inconvenient
Message was edited by:
Aku_28
Message was edited by:
Aku_28I think that I found the Sun endorsed book locations for using LDAP accounts that don't use authentication besides "crypt". I now can use an account with a "ssha" password. It can be more than 8 characters long.
Chapter 14 System Administration Guide: Naming and Directory Services
Read page 201 which is the pam.conf file pam_ldap setups. I edited my "/etc/pam.conf" file to reflect this
Chapter 7 Directory Server 5.2 2005Q4 - Administration Guide
Read page 316-318 which has a graphical technique to specify password syntax. I set it up and then tried the password by running "su - brahms". It now requires a longer password than 8 characters and it is set up to use "ssha" for that UID entry "brahms". -
RAC 10gr2 using ASM for RMAN a cluster file system or a Local directory
The environment is composed of a RAC with 2 nodes using ASM. I have to determine what design is better for Backup and Recovery with RMAN. The backups are going to be saved to disk only. The database is only transactional and small in size
I am not sure how to create a cluster file system or if it is better to use a local directory. What's the benefit of having a recovery catalog that is optional to the database?
I very much appreciate your advice and recommendation, TerryArf,
I am new to RAC. I analyzed Alejandro's script. He is main connection is to the first instance; then through sql*plus, he gets connected to the second instance. he exits the second instance and starts with RMAN backup to the database . Therefore the backup to the database is done from the first instance.
I do not see where he setenv again to change to the second instance to run RMAN to backup the second instance. It looks to me that the backup is only done to the first instance, but not to the second instance. I may be wrong, but I do not see the second instance backup.
Kindly, I request your assistance on the steps/connection to backup the second instance. Thank you so much!! Terry -
I have been using Elements11 for almost a year. I am suddenly getting the message:Some of the application components are missing from the application directory. Please reinstall. I deleted old version, reinstalled on my Mac and now get this message:A required application library failed to load and the product cannot continue. I also get the first message again. Organizer works but not editor. Frustrated!
What a waste of space to paste the code.
Why not ask in the iLife > iPhoto forum where your question belongs. -
I am attempting to publish a web site designed on i-web using a 3rd party host. The main page of my web site is asking for IP address of host, etc. I have all that, but it is asking for Directory/Path. To what is this referring?
Thanks.The directory/path is the path to the root folder and, in most cases, should be left blank...
http://www.iwebformusicians.com/iWeb/Publish-Website.html -
I have an iPhone 5 unlocked. I have been using it for few weeks but 4 days ago I turned it off and in the morning it had NoService. Called tmobile and apple costumer services no one helped. Did any one had this issue
If you got the Unlocked message it means it was successfully unlocked by AT&T. Apple will not relock or block it. They have no objections to it being used on T-Mobile. It is still under warrantee. Take to an Apple store. They can test it with a SIM from AT&T. If that doesn't work have them replace the phone. Have them verify that the new phone is unlocked. If it does work with the AT&T card then it is a T_Mobile problem.
-
[Solved] bash diff util for directories needed
Hi there
I have two dirs with nearly the same content.
Lets call them A and B.
A contains some files which are not in B, I want to a list of these files. I do not care about files existing in both dirs which have not the same content. It's only about the files existing or not.
My first thought was something like that
$ find A > contentOfA
$ find B > contentOfB
$ diff contentOfA contentOfB
but here I also get files which are in B but not in A.
Is there an easier way to do this?
Regards,
Keen
Last edited by keen90 (2011-09-25 15:18:44)Use 'comm' instead of diff - 'man comm'.
comm -23 contentOfA contentOfB
should do.
You can use diff like this
[karol@black ~]$ tree
├── A
│ ├── a
│ ├── b
│ ├── c
│ └── d
└── B
├── a
├── b
├── e
└── f
2 directories, 10 files
[karol@black ~]$ diff A B
Only in A: c
Only in A: d
Only in B: e
Only in B: f
Last edited by karol (2011-09-25 14:38:21)
Maybe you are looking for
-
Our company uses and Acrobat form for our online employment and volunteer applications. We have an issue with the form being submitted to with all the text fields apparently "hidden." the only way i have found to get the text that is entered to show
-
Hi, Is anyone did edited the payload in sxmb_moni and restarted the message? I read in many threads that it is possible to do.....could any one let me know how to do? regards.
-
HT203167 im missing a lot of music where did it go? and how can i get it back
im missing a lot of music where did it go and how do i bring it back on my library
-
Purchase mountain lion without mac
I can't re install mountain lion without purchasing. I need to purchase it without my MAC.
-
Is it possible to reset device passwords in Windows Intune
Hello, is it possible to have a device password for Windows Phone 8 device reset using Windows Intune in case a user forgets the password. Thank you Sascha