Solved: Using two different Cameras

I have a question about using cameras in Flash.
I have 3 cameras connected to my computer and I want to say flash put this camera's image to this movie clip and that one's to that movie clip.
I was using following method,
activeCamera.setQuality(0,100);
myMovieClip.output_vid.attachVideo(Camera.get());
But when I tried to use it for double cameras by
myMovieClip.output_vid.attachVideo(Camera.get());
mySecondMovieClip.output_vid.attachVideo(Camera.get());
Flash brought me the same image of default camera.
Is there a way to deal with such problem?
Thanks in advance.
Edit: Ok, I have found out I can solve this by giving some parameter to Camera.get().
eg. Camera.get(0) brings first camera while Camera.get(1) brings second.

It depends, I think. In one of my projects I combined footages from two camcorders – Canon Legria HF M306 (.MTS 1920x1080, 25 f/s) and Kodak Play Sport (.MOV 1280x720, 30 f/s). Project settings – HD 1080i, 25 f/s. Canon of course is much much better than Kodak in all aspects but one. Kodak can shoot under water (up to 30 ft or 10m) without any special equipment. To my surprise all editing (in PrE9) went very smoothly. By the way, besides HD output I made a PAL DVD version in the same project using SHARE option.
I think one of the reasons of my success was installation on my PC both Kodak and Canon software. So all the necessary codecs were already installed before PrE9 began editing. I do not use their software for editing because PrE9 has much more editing power.
I don’t know how PrE9 could manage different frame rates, but one must look at the screen very hard to notice that Kodak footage plays not so smoothly as native (I mean project’s 25 f/s) Canon footage.
So, try and may be you can be as lucky as me.
PS I imported raw (that is without any conversion) files from Canon and Kodak camcorders to my project.
Message was edited by: Alexander Kochetov

Similar Messages

Two different Cameras premiere E4 questions

Please help! I recorded my friends band and I used two different cameras to do the recording. One stationary recorded a wide shot of the band and the other mobile I had with me. I used the mobile one to do closeups then used the audio and video from the wide shot and did clips of just the lined up video of the mobile one. It looks great! So what is the problem. Well a couple things, I am using Premiere Elements 4. How do I save this project at a high resolution for the web (YouTube) also how do I save it to burn it to DVD?
Finally the really tricky question, the one camera was shot in widescreen format the other full screen. I would like to be able to crop and enlarge the full to make it a wide. I don't want to make the wide a full if I don't have to, because it will crop out band members.
(I don't really understand the whole picture/pixel/ratio thing)
Keep in mind this was my first shot at something like this I am trying to get down the actual technical process and I have Ideas of how to approach the shooting aspect in the future to improve it. Any input would help. Here is the link to what I have uploaded so far: http://www.youtube.com/watch?v=JfzjeHwKf38 I don't get why it is so small with crappy resolution, in premiere Elements it looks good. And here are the specs on the cameras:
Fuji Film Finepix S1500 (moving Camera)
Movie recording
640 x 480 pixels, 30 frames/sec. (I had it set to this one)
320 x 240 pixels, 30 frames/sec.
With monaural sound (Sound wasn't used)
* Optical or digital zoom function can be selected during movie recording.
Movie:
AVI (Motion JPEG) with sound
Audio
WAVE format, Monaural sound
Canon Mini DV ZR900 (Still Camera)
Digital Video
Standard Definition or High Definition
Standard Definition
Power Consumption
2.3 W
Image Sensor
1/6" CCD
Total Pixels
Approx. 680,000 pixels
Effective Pixels
tape: 16:9 - approx. 360,000 pixels (ADV.Z off)
16:9 - approx. 450,000 pixels (ADV.Z on, wide)
16:9 - approx. 360,000 pixels pixels (ADV.Z on tele)
Tape Format
MiniDV
Maximum recording time
SP: 80 min.; LP: 120 min. (80 min. cassette)
Lens
Zoom Ratio 41x Advanced Zoom
37x Optical / 2000x Digital
Focal Length f = 2.6 - 96.2mm
Zoom Speed Variable / 3 Fixed Zoom Speeds
Max F/Stop f/2.0 - 5.2
Focusing System
TTL (through the lens)

For YouTube settings, I'd go to the FAQ sub-forum, found on the right-hand side of the main forum page. There are suggestions there. Note: YouTube will re-encode whatever you upload, and they change their requirements monthly, if not sooner.
Now for the Widescreen vs Standard question. I assume that you used WideScreen, when you set up your Project. Is that correct?
First thing that I would look at would be to use Interpret Footage for the Standard Clips. Do one first, and choose 16:9 in Interpret Footage. How does this look? Only you can make that call.
If the band looks too fat, then we'll move on to Plan B. Go to one of your Standard Clips, and Select it. Go to Effects, and then Edit Effects. Look for the fixed Effect>Motion. Twirl it open and then go to Scale. Increase this, until the Frame fills the width of the Frame. This will also effectively Crop the vertical. If you need to alter how that Crop is seen, go to Effect>Motion>Position, and move the Frame up, or down to suit.
Good luck,
Hunt

How to use two different network cards on RT?

Hi everyone... I'm currently working on a project where I have to deal with the issue mentioned in the thread's topic: I have a PC with RT LabVIEW that has to be able to establish network connections using two different network cards. One will be used to connect via TCP/IP with a host computer that will show the data transmitted through shared variables; the other will communicate with another PC through Modbus protocol. The key is that each communication is done through a separate network card.
So far I haven't been able to figure out how to configure both things to happen. Does anyone know how to do this? Any tips will help.
For the RT communication I'm using a standard RT project, with the RT PC being given one of the IPs, and for the Modbus part, I created an I/O server with a master and a slave. Separately everything works fine, but when I get them together it simply won't work.
Thanks for your help!
Solved!
Go to Solution.

Sorry it took me so long to answer, I've been busy lately....I've found a solution to the problem I mentioned, and just in case anyone has similar problems in the future, I'll shortly describe what happened.
As Caseyw suggested, it was necessary to enable both network cards through the Measurement and Automation Explorer. The cause of the connections malfunction was actually that I wasn't using the "right" protocol for the Modbus communication, which ran on the secondary adapter. The solution was to use the URL protocol with the correct path on the field, addressing the right IP address. To avoid making this post a mixture of topics, I won't elaborate futher, but I got the gist of it, so if anyone is having similar problems whether it is working with several network cards or with Modbus communication protocols, feel free to contact me, I'll be glad to help.
Thanks

I cannot get ipod to start, Logo for power is the only one that appears but it will not recharge either by using pC or dock. I have used two different connecting wires but no difference in response

I cannot get Ipod to start. The only logo that comes up is the power needed but in spite of connecting the ipod to PC and using two different connection leads the ipod does not respond. I also tried to power it using a i station 7 but no difference. I tried all the usual pressing of both menu and play buttons. Is it fixable?

Thanks for your tip. I tried leaving the ipod in the I -Station 7 overnight and then reconnected it to my PC> It asked if i wanted to reset to factory settings. I did this and then the Apple logo came back on .After that a very sad looking logo of an ipod came on with www.apple.com/support/ipod underneath. I feel that either burial or cremation is my option now for this old ipod.

Using 3 different cameras on one project ?

Help me understand some things here. I am a little confussed about the p's and i's and mixing them in FCP X .
I primarily use 3 different cameras.
1) Canon MK 5 D MK II at h.264 at 1920 x 1080 29.97 fps or 23.976 fps I assume this is shot progressive, I can't tell from QT 7 inspector.
2) GoPro shooting h.264 at1920 x 1080 P 30 NTSC according to the camera instructions.
3) Sony SR 12 AVCHD at 1920 x 1080 60i according tho the camera manual.
My question boils down to how to handle the 1080 i footage? If my final product is both a DVD and upload to a web host service like vimeo or Exposure Room and UTube.
For the Internet I would export through the share > "X" or share> export movie and convert to 1280 x 720 p and then upload to site. In both cases the 1080i would be deinterlaced.
For DVD I would share> export movie and not convert. The conversion to SD woud be done by the DVD buring software.
In this case what happens to the various formats ? Is the progressive converted to interlaced or is the interlaced converted to progressive.
Should I maybe deinterlace before importing ?
What does my project properties have to do with all of this ?
Any insight would be appreciated.

Apple don't like this.
The simplet method would be to:
1) Make both iPods "enable disk use"
2) Plug in her iPod
3) iTunes will probably ask if she wants to delete all of her songs and replace them with your library, select NO.
4) Open the iPod in Windows Explorer
5) Simply drag & drop the chosen songs from your library onto the iPod in Explorer.
Hope all goes well. Click the relevant box above to let other users know if this post is "Helpful" or has "Solved" the problem.

Importing and editing footage with two different cameras

I am editing a film that has footage caught and imported from two different cameras. Some of the footage is from a handheld HD camera that I have worked with before and use an "Easy Setup of Apple Intermediate Codec, 29.97 fps, HDV Apple Intermediate Codec 1080i60." I want to add some video footage that I shot with my Canon Rebel t2i. I searched a number of threads and concluded that when working with a project shot with the t2i, I should have the the Easy Setup be "HD, 29.97fps, DVCPRO HD 1080p30" (side question: is this correct?). My question is when starting a project where I will be using footage from both cameras, what Easy Setup should I use and is there anything else I should keep in mind?

Shane-- Thanks for the willingness to help. I am in Helena, but travel all over the state for work--I am a fly fishing and bird hunting guide who likes to do some amateur filming and editing on the side. Love Missoula, Bozeman, Flathead area, etc! And since you are willing to be so helpful, I guess I should start with a go Cats!
I am brand new to FCP, having previously worked a fair amount with FCE4. I actually do have FCP 7 and work with it on my Macbook Pro. My handheld camera is a JVC Everio that captures in AVCHD (1920x1080). I had my Easy Setup in FCE4 as Apple Intermediate Codec. If I use footage from this camera in FCP7, should I continue to do this?
So not only am I new to FCP7, but I just bought the T2i and really am not totally sure what I am doing yet. I just got the Canon EOS Movie Plug-in and modified it according to some threads I read so that it works for the T2i. I also found directions on the Canon website on the proper way to Log and Transfer for T2i footage (side question: can I dump the files off my T2i onto an external HD and then Log and Transfer them into FCP7 from the external, and is there anything I need to know about when doing this?)
So now that you know that I am very knew to FCP7 and the T2i, maybe I should start from scratch. When I log and transfer, what format should I use when I transcode? ProRes 442? And then, however you suggest I should transcode, what should my Easy Setup look like for footage from the T2i?
Wow, if you are still reading at this point, and I haven't exhausted you with all of my questions and naivety, my final question is...once I have become comfortable with importing and editing footage from the T2i, what should I do if I want to log and transfer and then edit footage from both cameras? Do I need to change the Easy Setup? Do I need to make other changes?
Thanks again in advance for all of your help and patience!!!

Lightroom and two different camera types

I can import CR2 files from EOS 5D Mark II but not the ones from EOS 600d. Is it possible that Lightroom is not importing CR2 files from two different cameras?
I use the latest version.
Many thanks!

Is it possible that Lightroom is not importing CR2 files from two different cameras?
Yes, it is possible.
Can you tell us what happens when you try to import? If you get an error message, please quote it word-for-word.
I use the latest version.
We don't know what you mean by that. What is the version number of Lightroom?

Uprezzing film timeline which uses two different codecs

So I have my final film edit in FCP 6 which uses two different codecs...DVCPROHD 720p60 at 23.98fps and HDV 1080p24 at 23.98fps. There are only about 15 clips which are the HDV codec. My next step is to color correct in apple Color. So I did a quick test where I sent a couple clips of each codec, on the same timeline, into Color and back out into FCP, which seemed to roundtrip without any hitches...the only difference is that the DVCPRO clips came back as ProRes 422HQ 1280x720 and the HDV clips came back as 1920x1080...which is all fine. However, I do want 1080p (1920x1080) as my final output...for Bluray as well as DCP if my film gets picked up by a festival. So what I plan to do for my final output is export my completed Colored timeline to compressor and use ProRes 422 HQ at 1080p. My question is...since there isn't a specific 1080p ProRes HQ codec (like there is for DVCPROHD) but simply the "Geometry" tab in Compressor where you can change the 'Dimensions' to 1920x1080...is this how I "Uprez" my DVCPRO 720p clips to match my HDV 1080p clips?
I just want to make sure NOW, that my workflow will be good all the way up to finishing, before I start sending sections of my timeline to Color...
Thanks!
David

OK...you wanted a 1080p final, right? So why shrink the HDV down to 720p, and then blow it back up to 1080p? That's the point of doing both formats separately, and upscaling only the 720p...keeping the HDV at full size. How noticeable will it be? Test to find out. Personally, I'd do it my way.
And yes, upscale AFTER you color correct. As for re-color correcting down the line...why? Color correcting is the final process...do it until it's right...why would you go back? And if you did adjust a couple shots, then just render those back out, and only upscale those and put into that final sequence again. It's a small patch.
>why is it better to send the DVCPRO 720p stuff for upscale BEFORE marrying it with the HDV 1080p stuff.
because the HDV is already 1080. Scaling it down to 720, then back up will be TWO generation losses. Why do that?
>my method of upscaling the 720p with the 1080p stuff at the same time seemed logical to me (the 720p is upscaled while the 1080p stays the same)
But it doesn't...you first will be shrinking it to 720p...then blowing up to 1080p. And HDV is a GOP format without real frames, so the compression really pops when you upscale.
>just want to know WHY your method is better??
Because I tested this out..mixing 720p DVCPRO HD and HDV...and my method gave the best results. Call it "experience."

How can I send email using two different email address that both link back to my one exchange account on my Ipad mini

How can I send email using two different email address that both link back to my one exchange account on my Ipad mini?
On my PC I simply have a master return email address and use a POP for the secondary address. Both are through the one exchange account without a problem. I need to be able to do the same on my Ipad.

Ah, I should have made that clear. My domain didn't come from google. It was purchased at and is hosted at dreamhost, but I haven't used their email servers in years - I just route everything through gmail. I actually have a bunch of domains (with websites).
Gmail has an option that lets someone with custom domains send (and receive) email through gmail using the custom domain once Google confirms proper ownership of the domain (to prevent spammers and such). Gmail has a setting for "send email as" which allows gmail to be sent using a custom domain as the sender. I'm pretty sure Apple's old mobileme had this feature too, but I didn't use it.

Use two different printer services in one web template?

Hi!
Is it possible to use two different help services for printing in the same web template (for the same table item)?
Print1:
<param name="HELP_SERVICE" value="HELP_SERVICE_PRINT"/>
<param name="HELP_SERVICE_CLASS" value="ZCL_RSR_XLS_HELP_WINDOW_PRINT"/>
Print 2:
<param name="HELP_SERVICE" value="ZPRINTING"/>
<param name="HELP_SERVICE_CLASS" value="ZBW_PRINT_HELP_SERVICE"/>
I was thinking that you maybe could change the param name values for the "Help_service" and the "help_service_class" at runtime using the properties for the table item, so that you could choose which one to use, but I havne't been able to do that so far.
Does anyone have an idea?

This is not a problem. Just put the print service for the print to excel on an object other than the table web item. As long as these print services exist on any web item, you should be able to invoke them. I've tested this with putting the "Print with Excel" service on the Navigation Block Web Item and the other print service on the table web item. Hope that helps!
Prakash

How to use two different versions of Firefox at the same time on Snow Leopard?

I recently upgraded to Firefox 4.0 on my 27" iMac running Snow Leopard 10.6.7.
Previously, I was using Google's "Page Speed" along with Firebug in Firefox 3.6.15 to optimize images in my web pages, and to find other areas to optimize.
Page Speed is not yet compatible with Firefox 4.0. I wrote to Google about this some time ago -- no answer yet.
If I run Firefox 3.6.15 in order to use Page Speed, I run into a few problems afterward when I start using Firefox 4.0 again, since they both use the same "Firefox" folder in my "Application Support" folder.
How can I set it up so that I can have two separate "Firefox" folders in my "Application Support" folder?
Or is there an easier way to use two different versions of Firefox simultaneously, even if one has extensions and/or plug-ins installed which are not compatible with the other version?
Thanks for a great browser!

Please disregard my question. I just conducted more web search and learned how to use Firefox's profile manager in order to make a separate profile for Firefox 3.6.15.
You can find instructions on this page:
http://support.mozilla.com/en-US/kb/Managing%20profiles#os=mac&browser=fx35
'''A small tip:'''
If your Firefox app is named anything other than "Firefox" -- say for example "Firefox 3.6.15" -- when you follow the instructions at the above link, make sure you escape the blank space that is before the version number by adding a backward slash before it, when you type the command string in the Terminal. In other words, in that string, you should use this:
Firefox\ 3.6.15
I hope that helps someone.
WW

SBO - How to use two different Stock Account within the same Item Group

Hi,
I'm currently stuck within one of my implementation.
I'm deploying the same solution worldwide which worked pretty well until now. All the items are connected to an item group, with a unique GL account, supposed to book at the same time the good receipt and the good issue (Balance-Sheet Account = 14xxxxx).
My new unit is willing to use two different GL accounts when performing its stock entry (let say 14xxx10) and another GL account for the good issue, let say 14xxx20.
Do you have any clue so i can please them and keep using at the same time the item group ?
Thanking you in advance
Stephane

Hi,
In fact, we use the GL account as the HQ Account (Reporting Account) while the "Export Code" will be used to store the local GL Account (greek account).
As such, we can, somehow handle two different chart of accounts.
In my reporting, i'm only using a single GL account for stock movements, while my greek counterparts want to handle two different accounts.
Threfore, i have only two solution since there is normally a one to one relationship between a HQ account and a local account that are :
1 - Duplicate the HQ accounts
In that case, i do respect anytime the one to one relationship. I've got one HQ account for one local account. But how can i put this since i can only handle one single stock account.
2 - I keep my single stock account like this but i won't be managing the possibility to get two different Export Codes.
Regards
Stephane

Can you use two different apple ID's on one Ipad?

I would like to use two different apple id's on one IPAD. One apple ID is for work and the other is for personal use.

Read this.
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
 Cheers, Tom

HT204053 If I have set up my Mac with two different users, can I use two different Apple IDs on the same Mac?

If I have set up my Mac with two different users, can I use two different Apple IDs on the same Mac?

Each user account may have its own Apple ID.

Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

The link is to a discussion started on 12/18 in the FiOS Internet forum. Here's the link I get now, however it is different than the link I pulled a few hours ago. If this system changes the link again, it may not work.
http://forums.verizon.com/t5/FiOS-Internet/Frustration-and-just-confused-with-internet-help-please/t...
You can also look for the topic, "frustration and just confused" in the FiOS Internet forum.
Here's a link that is in the thread that gives more detail.
https://secure.dslreports.com/faq/15984
Good Luck!
P.S. "Copper Contributor" is my "rank." gs0b is my user name.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Solved: Using two different Cameras

Similar Messages

Maybe you are looking for