[Solved]Uzbl in [] mode
I started up uzbl-tabbed and the mode that it was in was []. Neither Cmd nor Ins. None of the commands worked. The only way i could kill it was by killing the uzbl-core process or by using the WM kill (Mod1+Shift+q)
On the next startup, it used to open my home page again in another tab, and every time the tabs kept on increasing.
I finally solved the problem by deleting the ~/.cache/uzbl folder.
My question is: How did this happen? Was it a keypress or a series of keypresses? If so, that should be a bug. Just want to verify if someone else has seen this before filing a bug report.
EDIT: I think I jumped the gun, I just found the bug report here
Last edited by Inxsible (2010-07-01 18:31:07)
D'oh !!!
I just realized that
grub-install /dev/sda
solved everything... Sorry for the noise
Similar Messages
-
[SOLVED] Uzbl compared side by side with Firefox
Hi I'm new to the forum and to Uzbl web browser.
I compared side by side Firefox and Uzbl, and I've a problem: sometimes the same page looks bad in Uzbl, that's because text often overlaps or overruns other parts of the page.
I noticed that Uzbl uses different fonts, and it seems to ignore that I installed ttf-liberation fonts...
Moreover fonts seems a little bit more blurred than firefox.
I really like this browser... is there a way to solve this problem?
Thanks!
Last edited by mt22 (2012-04-01 10:50:51)I am a web developer by trade and the way that browsers render is the bane of my existence. I don't know uzbl but see if it has the ability for user mods of the web page look a number of modern browsers do. If you look around there may also be a plugin for it for that browser. Browsers have default style sheets and if they don't allow the alteration you might be stuck, they pick the default fonts then you have the other problem in that web developers pick fonts normally by a css attribute called a font-family in that they put a list that the browser checks for fonts that it supports or has available. If the browser one doesn't support that font it goes down the developers list until one or none is found, if it finds one it uses it, if not it uses it's own default font. The other thing is maybe the developer didn't include any Linux friendly fonts. Liberation might no be in the list or the browser might not support the ones that are there. The point is that you may have to look around but accept you may not find a perfect solution. Web developers have been fighting that one from the beginning.
Hope that helps at least ti understand what's going on.
--jerry -
[Solved] ATL1E: 1000BaseT mode
Hi everyone,
I'm trying to get gigabit ethernet running on my EEE. The Attansic L1e is supposed to support it, and I know my router (Trendnet TEW-633GR) is not the problem as it works fine for my desktop. Autonegotiation results in 100mbit/s. I'm using the ATL1E driver included in the 2.6.30 kernel.
ethtool reports that this mode is not available, so I can't force it:
malstrond ~ $ sudo ethtool eth0
Settings for eth0:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pg
Wake-on: d
Current message level: 0x00000000 (0)
Link detected: yes
mii-tool agrees:
malstrond ~ $ sudo mii-tool -v eth0
eth0: negotiated 100baseTx-FD flow-control, link ok
product info: vendor 00:13:74, model 1 rev 9
basic mode: autonegotiation enabled
basic status: autonegotiation complete, link ok
capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control
link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control
The last line would suggest that the driver isn't able to recognize my router advertising gigabit ethernet. Might it be possible that my router is at fault and somehow doesn't advertise correctly, in a way the driver doesn't understand?
The NIC:
malstrond ~ $ sudo lspci -vs 03:00.0
03:00.0 Ethernet controller: Attansic Technology Corp. L1e Gigabit Ethernet Adapter (rev b0)
Subsystem: ASUSTeK Computer Inc. Device 8324
Flags: bus master, fast devsel, latency 0, IRQ 27
Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K]
I/O ports at ec00 [size=128]
Capabilities: [40] Power Management version 2
Capabilities: [48] MSI: Mask- 64bit+ Count=1/1 Enable+
Capabilities: [58] Express Endpoint, MSI 00
Capabilities: [6c] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [180] Device Serial Number ff-8c-24-00-8d-c5-67-ff
Kernel driver in use: ATL1E
Any ideas on a solution or where I could continue my research? Google doesn't really help as "Gigabit" is a part of the adapters name and "1000BaseT" seems to be a rarely used term.
Update: I think my NIC just doesn't have this feature. Marking as solved.
Last edited by Malstrond (2009-08-15 18:15:34)No, dmesg doesn't seem to help:
pci 0000:03:00.0: reg 10 64bit mmio: [0xfbfc0000-0xfbffffff]
pci 0000:03:00.0: reg 18 io port: [0xec00-0xec7f]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: PME# disabled
ATL1E 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ATL1E 0000:03:00.0: setting latency timer to 64
ATL1E 0000:03:00.0: irq 27 for MSI/MSI-X
ATL1E 0000:03:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
I recently upgraded to a kernel 2.6.31 git build, which resulted in a different lspci output:
03:00.0 Ethernet controller: Attansic Technology Corp. Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller (rev b0)
Subsystem: ASUSTeK Computer Inc. Device 8324
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 27
Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at ec00 [size=128]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 4189
Capabilities: [58] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [6c] Vital Product Data
Unknown small resource type 0b, will not decode more.
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [180] Device Serial Number ff-67-c5-8d-00-24-8c-ff
Kernel driver in use: ATL1E
Altough the same driver is still in use, the chipset is identified as a different one and not all versions the new name applies to are capable of gigabit ethernet. I'm beginning to think that the EEE 1000H just doesn't have a controller with this capability and it was just incorrectly identified. -
[SOLVED]VirtualBox Bridged mode not working
For some reason I am unable to start a virtual machine in host-only or bridged mode. I can do NAT mode but that doesn't really suit what I want to do very well. Here is the message I get when trying bridged mode.
Failed to start the virtual machine Windows XP.
Failed to open/create the internal network 'HostInterfaceNetworking-wlan0' (VERR_SUPDRV_COMPONENT_NOT_FOUND).
One of the kernel modules was not successfully loaded. Make sure that no kernel modules from an older verison of VirtualBox exist. Then try to recompile and reload the kernel modules by executing '/etc/init.d/vboxdrv setup' as root
(VERR_SUPDRV_COMPONENT_NOT_FOUND).
I can't run /etc/init.d/vboxdrv because it doesn't exist. I installed Vbox via Pacman and I'm embarassed to admit I don't really know where it is. I just launch it by right clicking on my desktop (using fluxbox).
Any ideas on where to go next?
also here are my vbox logs
00:00:00.534 VirtualBox 3.0.10_OSE r54097 linux.x86 (Nov 1 2009 19:44:00) release log
00:00:00.534 Log opened 2009-12-01T18:11:07.107676000Z
00:00:00.535 OS Product: Linux
00:00:00.535 OS Release: 2.6.30-ARCH
00:00:00.535 OS Version: #1 SMP PREEMPT Wed Sep 9 12:37:32 UTC 2009
00:00:00.535 Host RAM: 1956MB RAM, available: 1801MB
00:00:00.535 Executable: /usr/lib/virtualbox/VirtualBox
00:00:00.535 Process ID: 1818
00:00:00.535 Package type: LINUX_32BITS_GENERIC (OSE)
00:00:00.579 SUP: Loaded VMMR0.r0 (/usr/lib/virtualbox/VMMR0.r0) at 0xf9119060 - ModuleInit at 00000000f912c340 and ModuleTerm at 00000000f912c300
00:00:00.579 SUP: VMMR0EntryEx located at 00000000f912c1e0, VMMR0EntryFast at 00000000f912b530 and VMMR0EntryInt at 00000000f912b350
00:00:00.638 VBoxSharedClipboard mode: Bidirectional
00:00:00.739 ************************* CFGM dump *************************
00:00:00.746 pRoot=08bd5490:{/}
00:00:00.746 [/] (level 0)
00:00:00.746 Name <string> = "Windows XP" (cch=11)
00:00:00.746 UUID <bytes> = "52 b4 ff 3b 2d f7 57 4c 92 29 56 34 21 fc da 00" (cb=16)
00:00:00.746 RamSize <integer> = 0x0000000010000000 (268435456)
00:00:00.746 RamHoleSize <integer> = 0x0000000020000000 (536870912)
00:00:00.746 NumCPUs <integer> = 0x0000000000000001 (1)
00:00:00.746 TimerMillies <integer> = 0x000000000000000a (10)
00:00:00.746 RawR3Enabled <integer> = 0x0000000000000001 (1)
00:00:00.746 RawR0Enabled <integer> = 0x0000000000000001 (1)
00:00:00.746 PATMEnabled <integer> = 0x0000000000000001 (1)
00:00:00.746 CSAMEnabled <integer> = 0x0000000000000001 (1)
00:00:00.746 HwVirtExtForced <integer> = 0x0000000000000000 (0)
00:00:00.746 EnableNestedPaging <integer> = 0x0000000000000000 (0)
00:00:00.746 EnableVPID <integer> = 0x0000000000000000 (0)
00:00:00.746 EnablePAE <integer> = 0x0000000000000000 (0)
00:00:00.746
00:00:00.746 [/HWVirtExt/] (level 1)
00:00:00.746 Enabled <integer> = 0x0000000000000001 (1)
00:00:00.746 64bitEnabled <integer> = 0x0000000000000000 (0)
00:00:00.746
00:00:00.746 [/PDM/] (level 1)
00:00:00.746
00:00:00.746 [/PDM/Drivers/] (level 2)
00:00:00.746
00:00:00.746 [/PDM/Drivers/VBoxC/] (level 3)
00:00:00.746 Path <string> = "/usr/lib/virtualbox/components/VBoxC" (cch=37)
00:00:00.746
00:00:00.746 [/Devices/] (level 1)
00:00:00.746
00:00:00.746 [/Devices/pcarch/] (level 2)
00:00:00.746
00:00:00.746 [/Devices/pcarch/0/] (level 3)
00:00:00.746 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.746
00:00:00.746 [/Devices/pcarch/0/Config/] (level 4)
00:00:00.746
00:00:00.746 [/Devices/pcbios/] (level 2)
00:00:00.746
00:00:00.746 [/Devices/pcbios/0/] (level 3)
00:00:00.746 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.746
00:00:00.746 [/Devices/pcbios/0/Config/] (level 4)
00:00:00.746 RamSize <integer> = 0x0000000010000000 (268435456)
00:00:00.746 RamHoleSize <integer> = 0x0000000020000000 (536870912)
00:00:00.746 NumCPUs <integer> = 0x0000000000000001 (1)
00:00:00.746 HardDiskDevice <string> = "piix3ide" (cch=9)
00:00:00.746 FloppyDevice <string> = "i82078" (cch=7)
00:00:00.746 IOAPIC <integer> = 0x0000000000000000 (0)
00:00:00.746 PXEDebug <integer> = 0x0000000000000000 (0)
00:00:00.746 UUID <bytes> = "52 b4 ff 3b 2d f7 57 4c 92 29 56 34 21 fc da 00" (cb=16)
00:00:00.746 BootDevice0 <string> = "FLOPPY" (cch=7)
00:00:00.746 BootDevice1 <string> = "DVD" (cch=4)
00:00:00.746 BootDevice2 <string> = "IDE" (cch=4)
00:00:00.746 BootDevice3 <string> = "NONE" (cch=5)
00:00:00.746
00:00:00.746 [/Devices/8237A/] (level 2)
00:00:00.746
00:00:00.746 [/Devices/8237A/0/] (level 3)
00:00:00.746 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.746
00:00:00.746 [/Devices/pci/] (level 2)
00:00:00.746
00:00:00.746 [/Devices/pci/0/] (level 3)
00:00:00.746 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.746
00:00:00.746 [/Devices/pci/0/Config/] (level 4)
00:00:00.746 IOAPIC <integer> = 0x0000000000000000 (0)
00:00:00.746
00:00:00.746 [/Devices/pckbd/] (level 2)
00:00:00.746
00:00:00.746 [/Devices/pckbd/0/] (level 3)
00:00:00.746 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.746
00:00:00.746 [/Devices/pckbd/0/Config/] (level 4)
00:00:00.746
00:00:00.746 [/Devices/pckbd/0/LUN#0/] (level 4)
00:00:00.746 Driver <string> = "KeyboardQueue" (cch=14)
00:00:00.746
00:00:00.746 [/Devices/pckbd/0/LUN#0/Config/] (level 5)
00:00:00.746 QueueSize <integer> = 0x0000000000000040 (64)
00:00:00.746
00:00:00.746 [/Devices/pckbd/0/LUN#0/AttachedDriver/] (level 5)
00:00:00.746 Driver <string> = "MainKeyboard" (cch=13)
00:00:00.746
00:00:00.746 [/Devices/pckbd/0/LUN#0/AttachedDriver/Config/] (level 6)
00:00:00.747 Object <integer> = 0x0000000008bbb510 (146519312)
00:00:00.747
00:00:00.747 [/Devices/pckbd/0/LUN#1/] (level 4)
00:00:00.747 Driver <string> = "MouseQueue" (cch=11)
00:00:00.747
00:00:00.747 [/Devices/pckbd/0/LUN#1/Config/] (level 5)
00:00:00.747 QueueSize <integer> = 0x0000000000000080 (128)
00:00:00.747
00:00:00.747 [/Devices/pckbd/0/LUN#1/AttachedDriver/] (level 5)
00:00:00.747 Driver <string> = "MainMouse" (cch=10)
00:00:00.747
00:00:00.747 [/Devices/pckbd/0/LUN#1/AttachedDriver/Config/] (level 6)
00:00:00.747 Object <integer> = 0x0000000008bbb5e8 (146519528)
00:00:00.747
00:00:00.747 [/Devices/i82078/] (level 2)
00:00:00.747
00:00:00.747 [/Devices/i82078/0/] (level 3)
00:00:00.747 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.747
00:00:00.747 [/Devices/i82078/0/Config/] (level 4)
00:00:00.747 IRQ <integer> = 0x0000000000000006 (6)
00:00:00.747 DMA <integer> = 0x0000000000000002 (2)
00:00:00.747 MemMapped <integer> = 0x0000000000000000 (0)
00:00:00.747 IOBase <integer> = 0x00000000000003f0 (1008)
00:00:00.747
00:00:00.747 [/Devices/i82078/0/LUN#999/] (level 4)
00:00:00.747 Driver <string> = "MainStatus" (cch=11)
00:00:00.747
00:00:00.747 [/Devices/i82078/0/LUN#999/Config/] (level 5)
00:00:00.747 papLeds <integer> = 0x0000000008bbafc4 (146517956)
00:00:00.747 First <integer> = 0x0000000000000000 (0)
00:00:00.747 Last <integer> = 0x0000000000000000 (0)
00:00:00.747
00:00:00.747 [/Devices/i82078/0/LUN#0/] (level 4)
00:00:00.747 Driver <string> = "Block" (cch=6)
00:00:00.747
00:00:00.747 [/Devices/i82078/0/LUN#0/Config/] (level 5)
00:00:00.747 Type <string> = "Floppy 1.44" (cch=12)
00:00:00.747 Mountable <integer> = 0x0000000000000001 (1)
00:00:00.747
00:00:00.747 [/Devices/acpi/] (level 2)
00:00:00.747
00:00:00.747 [/Devices/acpi/0/] (level 3)
00:00:00.747 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.747 PCIDeviceNo <integer> = 0x0000000000000007 (7)
00:00:00.747 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:00.747
00:00:00.747 [/Devices/acpi/0/Config/] (level 4)
00:00:00.747 RamSize <integer> = 0x0000000010000000 (268435456)
00:00:00.747 RamHoleSize <integer> = 0x0000000020000000 (536870912)
00:00:00.747 NumCPUs <integer> = 0x0000000000000001 (1)
00:00:00.747 IOAPIC <integer> = 0x0000000000000000 (0)
00:00:00.747 FdcEnabled <integer> = 0x0000000000000001 (1)
00:00:00.747 ShowRtc <integer> = 0x0000000000000000 (0)
00:00:00.747 ShowCpu <integer> = 0x0000000000000000 (0)
00:00:00.747
00:00:00.747 [/Devices/acpi/0/LUN#0/] (level 4)
00:00:00.747 Driver <string> = "ACPIHost" (cch=9)
00:00:00.747
00:00:00.747 [/Devices/acpi/0/LUN#0/Config/] (level 5)
00:00:00.747
00:00:00.747 [/Devices/i8254/] (level 2)
00:00:00.747
00:00:00.747 [/Devices/i8254/0/] (level 3)
00:00:00.747
00:00:00.747 [/Devices/i8254/0/Config/] (level 4)
00:00:00.747
00:00:00.747 [/Devices/i8259/] (level 2)
00:00:00.747
00:00:00.747 [/Devices/i8259/0/] (level 3)
00:00:00.747 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.747
00:00:00.747 [/Devices/i8259/0/Config/] (level 4)
00:00:00.747
00:00:00.747 [/Devices/apic/] (level 2)
00:00:00.747
00:00:00.747 [/Devices/apic/0/] (level 3)
00:00:00.747 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.747
00:00:00.747 [/Devices/apic/0/Config/] (level 4)
00:00:00.747 IOAPIC <integer> = 0x0000000000000000 (0)
00:00:00.747 NumCPUs <integer> = 0x0000000000000001 (1)
00:00:00.747
00:00:00.747 [/Devices/mc146818/] (level 2)
00:00:00.747
00:00:00.747 [/Devices/mc146818/0/] (level 3)
00:00:00.747
00:00:00.747 [/Devices/mc146818/0/Config/] (level 4)
00:00:00.747
00:00:00.747 [/Devices/vga/] (level 2)
00:00:00.747
00:00:00.747 [/Devices/vga/0/] (level 3)
00:00:00.748 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.748 PCIDeviceNo <integer> = 0x0000000000000002 (2)
00:00:00.748 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:00.748
00:00:00.748 [/Devices/vga/0/Config/] (level 4)
00:00:00.748 VRamSize <integer> = 0x0000000003c00000 (62914560)
00:00:00.748 FadeIn <integer> = 0x0000000000000001 (1)
00:00:00.748 FadeOut <integer> = 0x0000000000000001 (1)
00:00:00.748 LogoTime <integer> = 0x0000000000000000 (0)
00:00:00.748 LogoFile <string> = "" (cch=1)
00:00:00.748 ShowBootMenu <integer> = 0x0000000000000002 (2)
00:00:00.748 CustomVideoModes <integer> = 0x0000000000000000 (0)
00:00:00.748 HeightReduction <integer> = 0x0000000000000000 (0)
00:00:00.748
00:00:00.748 [/Devices/vga/0/LUN#0/] (level 4)
00:00:00.748 Driver <string> = "MainDisplay" (cch=12)
00:00:00.748
00:00:00.748 [/Devices/vga/0/LUN#0/Config/] (level 5)
00:00:00.748 Object <integer> = 0x0000000008bbb6c8 (146519752)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/] (level 2)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/0/] (level 3)
00:00:00.748 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.748 PCIDeviceNo <integer> = 0x0000000000000001 (1)
00:00:00.748 PCIFunctionNo <integer> = 0x0000000000000001 (1)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/0/Config/] (level 4)
00:00:00.748 Type <string> = "PIIX4" (cch=6)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/0/LUN#999/] (level 4)
00:00:00.748 Driver <string> = "MainStatus" (cch=11)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/0/LUN#999/Config/] (level 5)
00:00:00.748 papLeds <integer> = 0x0000000008bbafcc (146517964)
00:00:00.748 First <integer> = 0x0000000000000000 (0)
00:00:00.748 Last <integer> = 0x0000000000000003 (3)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/0/LUN#2/] (level 4)
00:00:00.748 Driver <string> = "Block" (cch=6)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/0/LUN#2/Config/] (level 5)
00:00:00.748 Type <string> = "DVD" (cch=4)
00:00:00.748 Mountable <integer> = 0x0000000000000001 (1)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/0/LUN#0/] (level 4)
00:00:00.748 Driver <string> = "Block" (cch=6)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/0/LUN#0/Config/] (level 5)
00:00:00.748 Type <string> = "HardDisk" (cch=9)
00:00:00.748 Mountable <integer> = 0x0000000000000000 (0)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/0/LUN#0/AttachedDriver/] (level 5)
00:00:00.748 Driver <string> = "VD" (cch=3)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/0/LUN#0/AttachedDriver/Config/] (level 6)
00:00:00.748 Path <string> = "/home/royce/.VirtualBox/HardDisks/Windows XP.vdi" (cch=49)
00:00:00.748 Format <string> = "VDI" (cch=4)
00:00:00.748
00:00:00.748 [/Devices/pcnet/] (level 2)
00:00:00.748
00:00:00.748 [/Devices/pcnet/0/] (level 3)
00:00:00.748 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.748 PCIDeviceNo <integer> = 0x0000000000000003 (3)
00:00:00.748 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:00.748
00:00:00.748 [/Devices/pcnet/0/Config/] (level 4)
00:00:00.748 Am79C973 <integer> = 0x0000000000000001 (1)
00:00:00.748 MAC <bytes> = "08 00 27 bb 10 02" (cb=6)
00:00:00.748 CableConnected <integer> = 0x0000000000000000 (0)
00:00:00.748 LineSpeed <integer> = 0x0000000000000000 (0)
00:00:00.748
00:00:00.748 [/Devices/pcnet/0/LUN#999/] (level 4)
00:00:00.748 Driver <string> = "MainStatus" (cch=11)
00:00:00.748
00:00:00.748 [/Devices/pcnet/0/LUN#999/Config/] (level 5)
00:00:00.748 papLeds <integer> = 0x0000000008bbb094 (146518164)
00:00:00.749
00:00:00.749 [/Devices/pcnet/0/LUN#0/] (level 4)
00:00:00.749 Driver <string> = "IntNet" (cch=7)
00:00:00.749
00:00:00.749 [/Devices/pcnet/0/LUN#0/Config/] (level 5)
00:00:00.749 Trunk <string> = "wlan0" (cch=6)
00:00:00.749 TrunkType <integer> = 0x0000000000000003 (3)
00:00:00.749 Network <string> = "HostInterfaceNetworking-wlan0" (cch=30)
00:00:00.749 SharedMacOnWire <integer> = 0x0000000000000001 (1)
00:00:00.749
00:00:00.749 [/Devices/e1000/] (level 2)
00:00:00.749
00:00:00.749 [/Devices/serial/] (level 2)
00:00:00.749
00:00:00.749 [/Devices/parallel/] (level 2)
00:00:00.749
00:00:00.749 [/Devices/VMMDev/] (level 2)
00:00:00.749
00:00:00.749 [/Devices/VMMDev/0/] (level 3)
00:00:00.749 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.749 PCIDeviceNo <integer> = 0x0000000000000004 (4)
00:00:00.749 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:00.749
00:00:00.749 [/Devices/VMMDev/0/Config/] (level 4)
00:00:00.749
00:00:00.749 [/Devices/VMMDev/0/LUN#0/] (level 4)
00:00:00.749 Driver <string> = "MainVMMDev" (cch=11)
00:00:00.749
00:00:00.749 [/Devices/VMMDev/0/LUN#0/Config/] (level 5)
00:00:00.749 Object <integer> = 0x0000000008bbbac0 (146520768)
00:00:00.749
00:00:00.749 [/Devices/VMMDev/0/LUN#999/] (level 4)
00:00:00.749 Driver <string> = "MainStatus" (cch=11)
00:00:00.749
00:00:00.749 [/Devices/VMMDev/0/LUN#999/Config/] (level 5)
00:00:00.749 papLeds <integer> = 0x0000000008bbb0b4 (146518196)
00:00:00.749 First <integer> = 0x0000000000000000 (0)
00:00:00.749 Last <integer> = 0x0000000000000000 (0)
00:00:00.749
00:00:00.749 [/Devices/AudioSniffer/] (level 2)
00:00:00.749
00:00:00.749 [/Devices/AudioSniffer/0/] (level 3)
00:00:00.749
00:00:00.749 [/Devices/AudioSniffer/0/Config/] (level 4)
00:00:00.749
00:00:00.749 [/Devices/AudioSniffer/0/LUN#0/] (level 4)
00:00:00.749 Driver <string> = "MainAudioSniffer" (cch=17)
00:00:00.749
00:00:00.749 [/Devices/AudioSniffer/0/LUN#0/Config/] (level 5)
00:00:00.749 Object <integer> = 0x0000000008bbb500 (146519296)
00:00:00.749
00:00:00.749 [/Devices/ichac97/] (level 2)
00:00:00.749
00:00:00.749 [/Devices/ichac97/0/] (level 3)
00:00:00.749 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.749 PCIDeviceNo <integer> = 0x0000000000000005 (5)
00:00:00.749 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:00.749
00:00:00.749 [/Devices/ichac97/0/Config/] (level 4)
00:00:00.749
00:00:00.749 [/Devices/ichac97/0/LUN#0/] (level 4)
00:00:00.749 Driver <string> = "AUDIO" (cch=6)
00:00:00.749
00:00:00.749 [/Devices/ichac97/0/LUN#0/Config/] (level 5)
00:00:00.749 AudioDriver <string> = "alsa" (cch=5)
00:00:00.749 StreamName <string> = "Windows XP" (cch=11)
00:00:00.749
00:00:00.749 [/TM/] (level 1)
00:00:00.749 UTCOffset <integer> = 0x0000000000000000 (0)
00:00:00.749
00:00:00.749 ********************* End of CFGM dump **********************
00:00:00.749 MM: cbHyperHeap=0x140000 (1310720)
00:00:00.750 Logical host processors: 2, processor active mask: 0000000000000003
00:00:00.750 ************************* CPUID dump ************************
00:00:00.750 RAW Standard CPUIDs
00:00:00.750 Function eax ebx ecx edx
00:00:00.750 Gst: 00000000 00000005 756e6547 6c65746e 49656e69
00:00:00.750 Hst: 0000000a 756e6547 6c65746e 49656e69
00:00:00.750 Gst: 00000001 000006fd 00000800 00000009 078bf1bf
00:00:00.750 Hst: 000006fd 01020800 0000e39d bfebfbff
00:00:00.750 Gst: 00000002 05b0b101 005657f0 00000000 2cb43078
00:00:00.750 Hst: 05b0b101 005657f0 00000000 2cb43078
00:00:00.750 Gst: 00000003 00000000 00000000 00000000 00000000
00:00:00.750 Hst: 00000000 00000000 00000000 00000000
00:00:00.750 Gst: 00000004 00000000 00000000 00000000 00000000
00:00:00.750 Hst: 04000121 01c0003f 0000003f 00000001
00:00:00.750 Gst: 00000005 00000040 00000040 00000000 00000000
00:00:00.750 Hst: 00000040 00000040 00000003 00001110
00:00:00.750 Name: GenuineIntel
00:00:00.750 Supports: 0-5
00:00:00.750 Family: 6 Extended: 0 Effective: 6
00:00:00.750 Model: 15 Extended: 0 Effective: 15
00:00:00.750 Stepping: 13
00:00:00.750 APIC ID: 0x00
00:00:00.750 Logical CPUs: 0
00:00:00.750 CLFLUSH Size: 8
00:00:00.750 Brand ID: 0x00
00:00:00.751 Mnemonic - Description = guest (host)
00:00:00.751 FPU - x87 FPU on Chip = 1 (1)
00:00:00.751 VME - Virtual 8086 Mode Enhancements = 1 (1)
00:00:00.751 DE - Debugging extensions = 1 (1)
00:00:00.751 PSE - Page Size Extension = 1 (1)
00:00:00.751 TSC - Time Stamp Counter = 1 (1)
00:00:00.751 MSR - Model Specific Registers = 1 (1)
00:00:00.751 PAE - Physical Address Extension = 0 (1)
00:00:00.751 MCE - Machine Check Exception = 1 (1)
00:00:00.751 CX8 - CMPXCHG8B instruction = 1 (1)
00:00:00.751 APIC - APIC On-Chip = 0 (1)
00:00:00.751 Reserved = 0 (0)
00:00:00.751 SEP - SYSENTER and SYSEXIT = 0 (1)
00:00:00.751 MTRR - Memory Type Range Registers = 1 (1)
00:00:00.751 PGE - PTE Global Bit = 1 (1)
00:00:00.751 MCA - Machine Check Architecture = 1 (1)
00:00:00.751 CMOV - Conditional Move Instructions = 1 (1)
00:00:00.751 PAT - Page Attribute Table = 1 (1)
00:00:00.751 PSE-36 - 36-bit Page Size Extention = 1 (1)
00:00:00.751 PSN - Processor Serial Number = 0 (0)
00:00:00.751 CLFSH - CLFLUSH Instruction. = 1 (1)
00:00:00.751 Reserved = 0 (0)
00:00:00.751 DS - Debug Store = 0 (1)
00:00:00.751 ACPI - Thermal Mon. & Soft. Clock Ctrl.= 0 (1)
00:00:00.751 MMX - Intel MMX Technology = 1 (1)
00:00:00.751 FXSR - FXSAVE and FXRSTOR Instructions = 1 (1)
00:00:00.751 SSE - SSE Support = 1 (1)
00:00:00.751 SSE2 - SSE2 Support = 1 (1)
00:00:00.751 SS - Self Snoop = 0 (1)
00:00:00.751 HTT - Hyper-Threading Technolog = 0 (1)
00:00:00.751 TM - Thermal Monitor = 0 (1)
00:00:00.751 30 - Reserved = 0 (0)
00:00:00.751 PBE - Pending Break Enable = 0 (1)
00:00:00.751 Supports SSE3 or not = 1 (1)
00:00:00.751 Reserved = 0 (0)
00:00:00.751 DS Area 64-bit layout = 0 (1)
00:00:00.751 Supports MONITOR/MWAIT = 1 (1)
00:00:00.751 CPL-DS - CPL Qualified Debug Store = 0 (1)
00:00:00.751 VMX - Virtual Machine Technology = 0 (0)
00:00:00.751 SMX - Safer Mode Extensions = 0 (0)
00:00:00.751 Enhanced SpeedStep Technology = 0 (1)
00:00:00.751 Terminal Monitor 2 = 0 (1)
00:00:00.751 Supports Supplemental SSE3 or not = 0 (1)
00:00:00.751 L1 Context ID = 0 (0)
00:00:00.751 Reserved = 0x0 (0x0)
00:00:00.751 CMPXCHG16B = 0 (1)
00:00:00.751 xTPR Update Control = 0 (1)
00:00:00.751 Perf/Debug Capability MSR = 0 (1)
00:00:00.751 Reserved = 0x0 (0x0)
00:00:00.751 Direct Cache Access = 0 (0)
00:00:00.751 Supports SSE4_1 or not = 0 (0)
00:00:00.751 Supports SSE4_2 or not = 0 (0)
00:00:00.751 Supports the x2APIC extensions = 0 (0)
00:00:00.751 Supports MOVBE = 0 (0)
00:00:00.751 Supports POPCNT = 0 (0)
00:00:00.751 Reserved = 0x0 (0x0)
00:00:00.751 Supports XSAVE = 0 (0)
00:00:00.751 Supports OSXSAVE = 0 (0)
00:00:00.751 Reserved = 0x0 (0x0)
00:00:00.751
00:00:00.751 RAW Extended CPUIDs
00:00:00.751 Function eax ebx ecx edx
00:00:00.751 Gst: 80000000 80000008 00000000 00000000 00000000
00:00:00.751 Hst: 80000008 00000000 00000000 00000000
00:00:00.751 Gst: 80000001 00000000 00000000 00000000 00000000
00:00:00.751 Hst: 00000000 00000000 00000001 20100000
00:00:00.751 Gst: 80000002 65746e49 2952286c 6e655020 6d756974
00:00:00.751 Hst: 65746e49 2952286c 6e655020 6d756974
00:00:00.751 Gst: 80000003 20295228 6c617544 50432020 54202055
00:00:00.751 Hst: 20295228 6c617544 50432020 54202055
00:00:00.751 Gst: 80000004 30303433 20402020 36312e32 007a4847
00:00:00.751 Hst: 30303433 20402020 36312e32 007a4847
00:00:00.751 Gst: 80000005 00000000 00000000 00000000 00000000
00:00:00.751 Hst: 00000000 00000000 00000000 00000000
00:00:00.751 Gst: 80000006 00000000 00000000 04004040 00000000
00:00:00.751 Hst: 00000000 00000000 04004040 00000000
00:00:00.751 Gst: 80000007 00000000 00000000 00000000 00000000
00:00:00.751 Hst: 00000000 00000000 00000000 00000000
00:00:00.751 Gst: 80000008 00003024 00000000 00000000 00000000
00:00:00.751 Hst: 00003024 00000000 00000000 00000000
00:00:00.751 Gst: 80000009 07280202 00000000 00000000 00000503*
00:00:00.751 Hst: 07280202 00000000 00000000 00000503
00:00:00.751 Ext Name:
00:00:00.751 Ext Supports: 0x80000000-0x80000008
00:00:00.751 Family: 0 Extended: 0 Effective: 0
00:00:00.751 Model: 0 Extended: 0 Effective: 0
00:00:00.751 Stepping: 0
00:00:00.751 Brand ID: 0x000
00:00:00.751 Mnemonic - Description = guest (host)
00:00:00.751 FPU - x87 FPU on Chip = 0 (0)
00:00:00.751 VME - Virtual 8086 Mode Enhancements = 0 (0)
00:00:00.751 DE - Debugging extensions = 0 (0)
00:00:00.751 PSE - Page Size Extension = 0 (0)
00:00:00.751 TSC - Time Stamp Counter = 0 (0)
00:00:00.751 MSR - K86 Model Specific Registers = 0 (0)
00:00:00.751 PAE - Physical Address Extension = 0 (0)
00:00:00.751 MCE - Machine Check Exception = 0 (0)
00:00:00.751 CX8 - CMPXCHG8B instruction = 0 (0)
00:00:00.751 APIC - APIC On-Chip = 0 (0)
00:00:00.751 10 - Reserved = 0 (0)
00:00:00.751 SEP - SYSCALL and SYSRET = 0 (0)
00:00:00.751 MTRR - Memory Type Range Registers = 0 (0)
00:00:00.751 PGE - PTE Global Bit = 0 (0)
00:00:00.751 MCA - Machine Check Architecture = 0 (0)
00:00:00.751 CMOV - Conditional Move Instructions = 0 (0)
00:00:00.751 PAT - Page Attribute Table = 0 (0)
00:00:00.751 PSE-36 - 36-bit Page Size Extention = 0 (0)
00:00:00.751 18 - Reserved = 0 (0)
00:00:00.751 19 - Reserved = 0 (0)
00:00:00.751 NX - No-Execute Page Protection = 0 (1)
00:00:00.751 DS - Debug Store = 0 (0)
00:00:00.751 AXMMX - AMD Extensions to MMX Instr. = 0 (0)
00:00:00.751 MMX - Intel MMX Technology = 0 (0)
00:00:00.751 FXSR - FXSAVE and FXRSTOR Instructions = 0 (0)
00:00:00.751 25 - AMD fast FXSAVE and FXRSTOR Instr.= 0 (0)
00:00:00.751 26 - 1 GB large page support = 0 (0)
00:00:00.751 27 - RDTSCP instruction = 0 (0)
00:00:00.751 28 - Reserved = 0 (0)
00:00:00.751 29 - AMD Long Mode = 0 (1)
00:00:00.751 30 - AMD Extensions to 3DNow = 0 (0)
00:00:00.751 31 - AMD 3DNow = 0 (0)
00:00:00.751 LahfSahf - LAHF/SAHF in 64-bit mode = 0 (1)
00:00:00.751 CmpLegacy - Core MP legacy mode (depr) = 0 (0)
00:00:00.751 SVM - AMD VM Extensions = 0 (0)
00:00:00.751 APIC registers starting at 0x400 = 0 (0)
00:00:00.751 AltMovCR8 - LOCK MOV CR0 means MOV CR8 = 0 (0)
00:00:00.751 Advanced bit manipulation = 0 (0)
00:00:00.751 SSE4A instruction support = 0 (0)
00:00:00.751 Misaligned SSE mode = 0 (0)
00:00:00.751 PREFETCH and PREFETCHW instruction = 0 (0)
00:00:00.751 OS visible workaround = 0 (0)
00:00:00.751 Instruction based sampling = 0 (0)
00:00:00.751 SSE5 support = 0 (0)
00:00:00.751 SKINIT, STGI, and DEV support = 0 (0)
00:00:00.751 Watchdog timer support. = 0 (0)
00:00:00.751 31:14 - Reserved = 0x0 (0x0)
00:00:00.751 Full Name: Intel(R) Pentium(R) Dual CPU T3400 @ 2.16GHz
00:00:00.751 TLB 2/4M Instr/Uni: res0 0 entries
00:00:00.751 TLB 2/4M Data: res0 0 entries
00:00:00.751 TLB 4K Instr/Uni: res0 0 entries
00:00:00.751 TLB 4K Data: res0 0 entries
00:00:00.751 L1 Instr Cache Line Size: 0 bytes
00:00:00.751 L1 Instr Cache Lines Per Tag: 0
00:00:00.751 L1 Instr Cache Associativity: res0
00:00:00.751 L1 Instr Cache Size: 0 KB
00:00:00.751 L1 Data Cache Line Size: 0 bytes
00:00:00.751 L1 Data Cache Lines Per Tag: 0
00:00:00.751 L1 Data Cache Associativity: res0
00:00:00.751 L1 Data Cache Size: 0 KB
00:00:00.751 L2 TLB 2/4M Instr/Uni: off 0 entries
00:00:00.751 L2 TLB 2/4M Data: off 0 entries
00:00:00.751 L2 TLB 4K Instr/Uni: off 0 entries
00:00:00.751 L2 TLB 4K Data: off 0 entries
00:00:00.751 L2 Cache Line Size: 0 bytes
00:00:00.751 L2 Cache Lines Per Tag: 0
00:00:00.751 L2 Cache Associativity: off
00:00:00.751 L2 Cache Size: 0 KB
00:00:00.751 APM Features:
00:00:00.751 Physical Address Width: 36 bits
00:00:00.751 Virtual Address Width: 48 bits
00:00:00.751 Physical Core Count: 0
00:00:00.751
00:00:00.751 RAW Centaur CPUIDs
00:00:00.751 Function eax ebx ecx edx
00:00:00.751 Gst: c0000000 07280202 00000000 00000000 00000503
00:00:00.751 Hst: 07280202 00000000 00000000 00000503
00:00:00.751 Gst: c0000001 07280202 00000000 00000000 00000503
00:00:00.751 Hst: 07280202 00000000 00000000 00000503
00:00:00.751 Gst: c0000002 07280202 00000000 00000000 00000503
00:00:00.751 Hst: 07280202 00000000 00000000 00000503
00:00:00.751 Gst: c0000003 07280202 00000000 00000000 00000503
00:00:00.751 Hst: 07280202 00000000 00000000 00000503
00:00:00.751 Centaur Supports: 0xc0000000-0x07280202
00:00:00.751 Mnemonic - Description = guest (host)
00:00:00.751 AIS - Alternate Instruction Set = 0 (1)
00:00:00.751 AIS-E - AIS enabled = 0 (1)
00:00:00.751 RNG - Random Number Generator = 0 (0)
00:00:00.751 RNG-E - RNG enabled = 0 (0)
00:00:00.751 LH - LongHaul MSR 0000_110Ah = 0 (0)
00:00:00.751 FEMMS - FEMMS = 0 (0)
00:00:00.751 ACE - Advanced Cryptography Engine = 0 (0)
00:00:00.751 ACE-E - ACE enabled = 0 (0)
00:00:00.751 ACE2 - Advanced Cryptography Engine 2 = 0 (1)
00:00:00.751 ACE2-E - ACE enabled = 0 (0)
00:00:00.751 PHE - Hash Engine = 0 (1)
00:00:00.751 PHE-E - PHE enabled = 0 (0)
00:00:00.751 PMM - Montgomery Multiplier = 0 (0)
00:00:00.751 PMM-E - PMM enabled = 0 (0)
00:00:00.751
00:00:00.751
00:00:00.751 ******************** End of CPUID dump **********************
00:00:00.775 REM: VBoxREM32
00:00:00.779 TM: GIP - u32Mode=1 (SyncTSC) u32UpdateHz=75
00:00:00.812 TM: cTSCTicksPerSecond=0x7474ed92 (1 953 820 050) fTSCVirtualized=true fTSCUseRealTSC=false
00:00:00.812 TM: fMaybeUseOffsettedHostTSC=true TSCTiedToExecution=false TSCNotTiedToHalt=false
00:00:00.812 CoreCode: R3=b3f47000 R0=f805a000 RC=a02b0000 Phys=0000000035e14000 cb=0x2000
00:00:00.891 [SMP] BIOS with 1 CPUs
00:00:00.928 SUP: Loaded VBoxDDR0.r0 (/usr/lib/virtualbox/VBoxDDR0.r0) at 0xf8151060 - ModuleInit at 0000000000000000 and ModuleTerm at 0000000000000000
00:00:00.939 SUP: Loaded VBoxDD2R0.r0 (/usr/lib/virtualbox/VBoxDD2R0.r0) at 0xf809c060 - ModuleInit at 0000000000000000 and ModuleTerm at 0000000000000000
00:00:00.939 Activating Local APIC
00:00:00.939 CPUMSetGuestCpuIdFeature: Enabled APIC
00:00:00.939 CPUMSetGuestCpuIdFeature: Disabled x2APIC
00:00:00.939 PIT: mode=3 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:00:00.953 Shared Folders service loaded.
00:00:01.003 VDInit finished
00:00:01.003 PIIX3 ATA: LUN#0: disk, PCHS=4161/16/63, total number of sectors 4194304
00:00:01.003 PIIX3 ATA: LUN#1: no unit
00:00:01.003 PIIX3 ATA: LUN#2: CD/DVD, total number of sectors 0, passthrough disabled
00:00:01.003 PIIX3 ATA: LUN#3: no unit
00:00:01.003 PIIX3 ATA: Ctl#0: finished processing RESET
00:00:01.103 PIIX3 ATA: Ctl#1: finished processing RESET
00:00:01.204 IntNet#0: szNetwork={HostInterfaceNetworking-wlan0} enmTrunkType=3 szTrunk={wlan0} fFlags=0x1 cbRecv=223232 cbSend=36864
00:00:01.204 PDM: Failed to construct 'pcnet'/0! VERR_SUPDRV_COMPONENT_NOT_FOUND (-3700) - The component factory was not found.
00:00:01.214 ERROR [COM]: aRC=NS_ERROR_FAILURE (0x80004005) aIID={0a51994b-cbc6-4686-94eb-d4e4023280e2} aComponent={Console} aText={Failed to open/create the internal network 'HostInterfaceNetworking-wlan0' (VERR_SUPDRV_COMPONENT_NOT_FOUND).
00:00:01.214 One of the kernel modules was not successfully loaded. Make sure that no kernel modules from an older version of VirtualBox exist. Then try to recompile and reload the kernel modules by executing '/etc/init.d/vboxdrv setup' as root (VERR_SUPDRV_COMPONENT_NOT_FOUND)} aWarning=false, preserve=false
00:00:01.220 Power up failed (vrc=VERR_SUPDRV_COMPONENT_NOT_FOUND, rc=NS_ERROR_FAILURE (0X80004005))
Last edited by K-radical (2009-12-07 17:42:13)wonder wrote:be sure that the modules are loaded. lsmod | grep vbox.
for bridged you have to load vboxnetflt
Thanks a bunch...
sudo modprobe vboxnetflt
did it. -
[SOLVED] Disabling N mode: possible? (iwl4965)
Hey guys, I have an Intel 4965 802.11abgn wireless card.
I have been getting download speeds significantly lower than what I expect and what I get with Windows Vista on the same machine.
For example, with the easylist.com Arch mirror I usually get about around 1mbps on other computers. With this one, I get between 60-200kbps.
This happened in Vista as well, but I fixed the problem by disabling N mode in a device manager. I guess our router doesn't support it. So, my question is this: is there a way for me to disable N mode under Linux? It'd be great to get my regular download speeds back. Thanks!
Last edited by wirenik (2008-12-05 01:39:17)lucke wrote:Try loading the module with "modprobe module_name that_option=1" (rmmod it first). If it works, add "options module_name that_option=1" to /etc/modprobe.conf to make it permament.
I did it!
$ modprobe -r iwlagn
$ modprobe iwlagn 11n_disable=1
Now I get up to nearly 2mbps from easynews, and download speeds everywhere else are soaring too. Thanks a million for the help, everyone! -
[SOLVED] uzbl-browser and dmenu-vertical
I recently installed the uzbl-browser, which is just great. It uses dmenu for bookmarks, and it has been suggested (I can dredge up posts if necessary) that the "patched" version dmenu-vertical will improve the experience by listing the bookmarks vertically (horizontally you can see the first three or so, and then end up scrolling). Looking in the AUR there are two packages: dmenu-vertical and dmenu-vertical-xft. I chose the version with XFT support.
When I tried to install it, pacman complained that it conflicted with dmenu, which was already installed. I uninstalled dmenu, which required uninstalling uzbl-browser, installed dmenu-vertical-xft, and then attempted to install uzbl-browser. When I answered "no" to that installation's suggestion that I replace dmenu-vertical-xft with dmenu, the install aborted.
So I have reverted to uzbl-browser with vanilla dmenu, but I would like to get it working with the vertical patch. Has anybody done this, and if so how?
Thanks - Hy
Last edited by Hy Ginsberg (2010-04-10 00:10:35)Thanks -- just what I needed. - Hy
-
[SOLVED] Uzbl weird characters
When viewing some pages in uzbl, such as Youtube, I am getting a cryptic character instead of what is supposed to be there. IIRC it means that the character it is trying to load doesn't exist in the current character map, correct? How can I fix this? (Sorry if there is already a thread about this. I searched around and didn't find anything). I would also like to note that I don't have this problem in chromium or any other application.
Thanks
Last edited by itsbrad212 (2010-08-14 17:05:19)I installed ttf-dejavu and it seems to be fixed.
Last edited by itsbrad212 (2010-08-14 17:05:58) -
Hello!
I just recently installed uzbl from http://aur.archlinux.org/packages.php?ID=25972 and works really great! Haven't gone through each function yet though. My problem is I was assuming that the default command to open a new uzbl window is :new_window http://google.com since I found the line below in the default config:
set new_window = sh 'uzbl-browser -u $8'
I've also tried:
bind t _ = sh 'uzbl --uri %s'
Not working too. Although when I enter the command:
sh "uzbl-browser -u htt://google.com"
It works just fine.
Any help appreciated.
Thanks!
Last edited by dsdeiz (2010-02-12 02:37:00)TaylanUB wrote:
mjheagle8 wrote:the command to start uzbl browser is <code>uzbl-browser</code>
That, plus the fact that Uzbl doesn't have real "tab"s; but any number of instances you want running at the same time.
There's plenty ways to simulate tabbed browsing though.
Best to just go through the documentation.
Oh, currently using the Tabbed layout of the wm i am using. What I did now is just made a keybind from xmonad to just spawn uzbl-browser. Not sure if it's the best way though I guess it's faster for me. If there are any other solutions, do tell. Thanks again! -
[Solved]Uzbl-browser + tabbing = how?
Any tutorial to get Uzbl-browser working with tabbing navigation?
The uzbl_tabbed.py in official site doesn't work. And i suppose tabbed is the real solution but i just can't make it work.
Last edited by teh (2010-01-23 17:17:06)JackH79 wrote:
I'm using the latest (2010/01/05) version and the tabbed browser works fine for me (although I'm not using it).
Probably stupid question, but did you call
uzbl-tabbed
instead of
uzbl-browser
to start it?
I did it, but it makes no sense because pacman just installed uzbl-core and uzbl-browser.
About uzbl_tabbed.py, i can't find that file, the links in official wiki (http://www.uzbl.org/wiki/uzbl_tabbed) are broken.
I'm using dwm, and tabbed already installed but i don't know where to start. -
[SOLVED] systemd: laptop-mode-tools fails to start (No such file ...)
Hi,
I recently moved to systemd. I noticed that 'laptop-mode-tools' does not start:
Loaded: error (Reason: No such file or directory)
Active: inactive (dead)
Also laptop-mode itself does not run (but exits successfully), maybe this has something to do with it:
laptop-mode.service - Laptop Mode Tools
Loaded: loaded (/usr/lib/systemd/system/laptop-mode.service; enabled)
Active: active (exited) since Sat, 2012-11-10 10:44:13 CET; 2min 17s ago
Process: 1020 ExecStart=/usr/sbin/laptop_mode init auto (code=exited, status=0/SUCCESS)
CGroup: name=systemd:/system/laptop-mode.service
I cannot find anything in journal that would help resolve this issue. Has someone else come across this problem? Where should I look to fix this issue?
Sidenote: When I boot up, there show up some errors about 'eth0' and 'wlan0' "No such file or directory", but I cannot find them in the journal so I don't know them exactly.
Last edited by javex (2012-11-10 12:41:07)When I upgraded, pacman said the following
[2012-11-04 09:41] The systemd service name has changed from \laptop-mode-tools" to "laptop-mode"
[2012-11-04 09:41] The change requires the old symlink to be manually removed:
[2012-11-04 09:41] rm /etc/systemd/system/multi-user.target.wants/laptop-mode-tools.service
[2012-11-04 09:41] The laptop-mode.service can be enabled using:
[2012-11-04 09:41] systemctl enable laptop-mode
[2012-11-04 09:41] upgraded laptop-mode-tools (1.61-2 -> 1.62-2) -
[SOLVED] Monitor display modes not respected ! (VirtualBox)
Hi I've created a new 10-monitor.conf file at /etc/X11/xorg.conf.d/10-monitor.conf
check it here : http://pastebin.com/4rC5ijXd
But when I reboot the computer and get on my gnome-session, it doesn't respect the preferred mode and when I go on System Settings>Display I stil can only use theses resolutions : 1024x768 and 800x600 !
How can I fix it ?
Thanks in advance.
Last edited by DarkRedman (2012-03-28 23:59:08)I forgot to mention I also tried with random and I got an error like it's not possible to go further than 1024x768 dimensions, I also forgot to mention that I do it in a Virtual Box (OSE) Machine.
-
[SOLVED] Emacs-Haskell-Mode Garbage on First Load
I installed emacs-haskell-mode from pacman and I have this in my .emacs file:
(load-library "haskell-site-file")
haskell-site-file.el autoloads haskell-mode when I open a haskell file. All works fine, but the very first time I open a haskell file (and load haskell-mode), this garbage gets spit out in my minibuffer:
#[nil "\300C\207"
[t]
2]
I've only been on emacs for a couple of months now and I've never seen that output before. Haskell mode works fine as far as I can tell once it's loaded so the garbage output isn't causing any problems, but I'm just curious as to what it is and why it's there.
Last edited by choogi (2010-07-14 21:02:01)If you're new to emacs, I don't expect you'd understand much lisp yet, but here is the answer:
When including haskell-mode the following is run.
(eval-when-compile
;; Emacs 21 defines `values' as a (run-time) alias for list.
;; Don't maerge this with the pervious clause.
(if (string-match "values"
(pp (byte-compile (lambda () (values t)))))
(defsubst values (&rest values)
values)))
See the line starting with 'pp'. That basically says to pretty-print the value of the byte-compile. It pretty prints to the echo area (what you refer to as the minibuffer). If you eval the byte-compile you get the same value you're seeing.
This is a very long way to say that it's probably a bug. -
How to solved programing inunlock mode
pls hlpe me how to solved programing unlock mode
Hi,
I am sorry. I was not able to understand your issue.Can you please elaborate on this issue?
I am waiting to hear back from you.
!------------------- Please click the KUDOS star on the left to say 'Thanks'. Please mark 'Accept as Solution' if it answers/solves your problem. Thank you-----------------------------------------------------------------!
I am an HP Employee. -
[Solved] zsh (vi-mode) and RPS1
I'm a zsh (oh-my-zsh) user and vi-mode plugin works: https://github.com/robbyrussell/oh-my-z … plugin.zsh
So I want to improve it:
function zle-line-init zle-keymap-select {
zle reset-prompt
# change cursor color to reflect vicmd mode from http://andreasbwagner.tumblr.com/post/804629866/zsh-cursor-color-vi-mode
zle-keymap-select () {
if [ $TERM = "screen" ]; then
if [ $KEYMAP = vicmd ]; then
echo -ne '\033P\033]12;#FF3333\007\033\\'
else
echo -ne '\033P\033]12;#99FF33\007\033\\'
fi
elif [ $TERM != "linux" ]; then
if [ $KEYMAP = vicmd ]; then
echo -ne "\033]12;#FF3333\007"
else
echo -ne "\033]12;#99FF33\007"
fi
fi
}; zle -N zle-keymap-select
zle-line-init () {
zle -K viins
if [ $TERM = "screen" ]; then
echo -ne '\033P\033]12;#99FF33\007\033\\'
elif [ $TERM != "linux" ]; then
echo -ne "\033]12;#99FF33\007"
fi
}; zle -N zle-line-init
bindkey -v
# if mode indicator wasn't setup by theme, define default
if [[ "$MODE_INDICATOR" == "" ]]; then
MODE_INDICATOR="%{$fg_bold[red]%}<%{$fg[red]%}<<%{$reset_color%}"
fi
function vi_mode_prompt_info() {
echo "${${KEYMAP/vicmd/$MODE_INDICATOR}/(main|viins)/}"
# define right prompt, if it wasn't defined by a theme
if [[ "$RPS1" == "" && "$RPROMPT" == "" ]]; then
RPS1='$(vi_mode_prompt_info)'
fi
My theme did not defined the right prompt, so I'm expecting that "<<<" as RPS1 in vicmd mode, but for some odd reason it did not appeared, only the cursor color changed as expected. What is wrong with it?
Last edited by irtigor (2011-06-17 21:35:59)You basically define function zle-line-init and zle-keymap-select to reset the prompt (your first 3 lines) and then you overwrite them to change the cursor colors so 'zle reset-prompt' is never called.
-
Master Data loading got failed: error "Update mode R is not supported by th
Hello Experts,
I use to load master data for 0Customer_Attr though daily process chain, it was running successfully.
For last 2 days master data loading for 0Customer_Attr got failed and it gives following error message:
"Update mode R is not supported by the extraction API"
Can anyone tell me what is that error for? how to resolve this issue?
Regards,
NiravHi
Update mode R error will come in the below case
You are running a delta (for master data) which afils due to some error. to resolve that error, you make the load red and try to repeat the load.
This time the load will fail with update mode R.
As repeat delta is not supported.
So, now, the only thing you can do is to reinit the delta(as told in above posts) and then you can proceed. The earlier problem has nothing to do with update mode R.
example your fiorst delta failed with replication issue.
only replicating and repeaing will not solve the update mode R.
you will have to do both replication of the data source and re-int for the update mode R.
One more thing I would like to add is.
If the the delat which failed with error the first time(not update mode R), then
you have to do init with data transfer
if it failed without picking any records,
then do init without data transfer.
Hope this helps
Regards
Shilpa
Edited by: Shilpa Vinayak on Oct 14, 2008 12:48 PM
Maybe you are looking for
-
30 gig iPod not found in My Computer or iTunes when plugged in
I just got this iPod the other day for a birthday present from my father. I immediately put some music and video on it and all was fine. I've had it plugged in a few times and it worked perfectly fine again. Last night I tried to plug it in again to
-
I'm not one to join boards for the purpose of asking a question, but it's here that I'm stumped, and if anyone could help, I'd really appreciate it. Here's the first part of the task: "Task- Imagine that you are an owner of a hardware store and need
-
Loading additional files as attachements using SFTP adapter
Hi I have to send some attachments using SFTP adapter. Is it possible, if so what is the approach for doing this. Any online resource would be appreciated.
-
Internet Explorer has no place for me to hit "print". What do I do?
On my Internet Explorer, I have no place to hit "print". Even when I right click, there's no choice for "print". What's my problem? I am not computer literate, so please instruct me in "everyday" language. Thank you.
-
Failover Cluster Manager 2012 Showing Wrong Disk Resource - Fix by Powershell
On Server 2012 Failover Cluster Manager, we have one Hyper-V virtual machine that is showing the wrong storage resource. That is, it is showing a CSV that is in no way associated with the VM. The VM has only one .vhd, which exists on Volume 16. Th