[solved] Various MP3s are marked as [invalid encoding] with Quod Libet

Various MP3s are marked as [invalid encoding] when I attempt to open them in Quod Libet. These same MP3s open fine in VLC. I checked and I have everything related to gstreamer installed: good, bad, ugly, ffmpeg. My thinking is that should do it but it doesn't. The error listed is "Resource not found." But of course Quod Libet does have the correct path to the file. Also, in case this could be related, the files all appear to show raw unicode in the comments tag rather than the comments. LIke so: 000010A3 000010E3 000057E6 000062C2 0004F705 0005B198 00008000 00008000 00005A9C 00005A3F. Rather than... well I'm not sure what that's supposed to be.
I checked the wiki on gstreamer but and glanced at Pulse's but Pulse, ALSA, and OSS don't seem to be relevant.
Last edited by xidar (2012-06-28 21:36:29)

Yep I went back and looked and it's everything, except one song, that has an "é" and also the bôa album. I'll file a bug report about and call it solved.
Also, I cleared all the extra tags and the junk text (which was probably a custom tag at one point) that was in comments and it works. So maybe iTunes screwed up the formatting and Ex Falso took and mangled all of my comments because of it and something to do with unicode.
Last edited by xidar (2012-06-28 22:01:26)

Similar Messages

Infopath cannot submit the form because it contains errors. Errors are marked with either a red asterik(required fields) or a red, dashed border (invalid values)

Infopath cannot submit the form because it contains errors. Errors are marked with either a red asterik(required fields) or a red, dashed border (invalid values).
Press Ctrl+Shift+O for next error or Press Ctrl+Shift+I for error details
Please help me, Thank in advance.
Sravan.

Hi Sravan, this means that one or more of the fields are required to be filled in or have validation set up on them so that the information entered matches a certain criteria. Make sure what's entered matches what's required. If the form still can't be
submitted, check the rules set in InfoPath and the list/library to see what's causing the error(s).
cameron rautmann

What are valid and invalid email address characters

What are valid and invalid email address characters in Exchange 2010, for example can you have Conan.O'[email protected] is there a document that shows the valid and invalid sysmbols?

Hi
The format of email addresses is
local-part@domain where the local-part may be up to 64 characters long and the
domain name may have a
maximum of 253 characters - but the maximum 256 characters length of a forward or reverse path restricts the entire email address to be no more than 254 characters.[1]
The formal definitions are in RFC 5322 (sections 3.2.3
and 3.4.1) and RFC 5321 - with a more readable form given in
the informational RFC 3696[2]
and the associated errata.
Local part
The local-part of the email address may use any of these
ASCII characters
RFC 5322 Section
3.2.3:
Uppercase and lowercase English letters (a–z, A–Z) (ASCII: 65-90, 97-122)
Digits
0 to
9 (ASCII: 48-57)
Characters
!#$%&'*+-/=?^_`{|}~ (ASCII: 33, 35-39, 42, 43, 45, 47, 61, 63, 94-96, 123-126)
Character
. (dot, period, full stop) (ASCII: 46) provided that it is not the first or last character, and
provided also that it does not appear two or more times consecutively (e.g. [email protected] is not allowed.).
Special characters are allowed with restrictions. They are:
o
Space and
"(),:;<>@[\] (ASCII: 32, 34, 40, 41, 44, 58, 59, 60, 62, 64, 91-93)
The restrictions for special characters are that they must only be used when contained between quotation marks, and that 3 of them (The
space, backslash \ and
quotation mark " (ASCII: 32, 92, 34)) must also be preceded by a backslash
\ (e.g.
A quoted string may exist as a dot separated entity within the local-part, or it may exist when the outermost quotes are the outermost characters of the local-part
(e.g. abc."defghi"[email protected] or
"abcdefghixyz"@example.com are allowed. Conversely,
abc"defghi"[email protected] is not; neither is
abc\"def\"[email protected]). Quoted strings and characters however, are not commonly used.
RFC 5321 also
warns that "a host that expects to receive mail SHOULD avoid defining mailboxes where the Local-part requires (or uses) the Quoted-string form".
The local-part "postmaster" is treated specially - it is case-insensitive, and should be forwarded to the server's administrator. Technically all other local-parts
are case sensitive, therefore [email protected] and [email protected] specify different mailboxes. However most organizations treat uppercase and lowercase letters as equivalent, and also do not allow use of the technically valid characters
(space, ? and ^). Organizations are free to restrict the forms of their own email addresses as desired, e.g.,
Windows Live Hotmail,
for example, only allows creation of email addresses using alphanumerics, dot (.), underscore (_)
and hyphen (-).[3]
Systems that send mail must be capable of handling outgoing mail for all valid addresses. Contrary to the relevant standards, some defective systems treat certain
legitimate addresses as invalid and fail to handle mail to these addresses. Hotmail, for example, refuses to send mail to any address containing any of the following standards-permissible characters:
!#$%*/?^`{|}~
Domain part
The domain name part of an email address has to conform to strict guidelines: it must match the requirements for a
hostname,
consisting of letters, digits, hyphens and dots. In addition, the domain part may be an
IP address
literal, surrounded by square braces, such as jsmith@[192.168.2.1], although this is rarely seen except
in email spam.
Examples
Valid email addresses
<tt>[email protected]</tt>
<tt>[email protected]</tt>
<tt>[email protected]</tt>
<tt>much."more\ unusual"@example.com</tt>
<tt>very.unusual."@"[email protected]</tt>
<tt>very."(),:;<>[]".VERY."very@\\\ \"very"[email protected]</tt>
Invalid email addresses
<tt>Abc.example.com</tt> (an @ character must separate the local and domain parts)
<tt>[email protected]</tt> (character dot(.) is last in local part)
<tt>[email protected]</tt> (character dot(.) is double)
<tt>A@b@[email protected]</tt> (only one @ is allowed outside quotation marks)
<tt>a"b(c)d,e:f;g<h>i[j\k][email protected]</tt> (none of the special characters in this local part
is allowed outside quotation marks)
<tt>just"not"[email protected]</tt> (quoted strings must be dot separated, or the only element making
up the local-part)
<tt>this is"not\[email protected]</tt> (spaces, quotes, and backslashes may only exist when within
quoted strings and preceded by a slash)
<tt>this\ still\"not\\[email protected]</tt> (even if escaped (preceded by a backslash), spaces, quotes,
and backslashes must still be contained by quotes)
Terence Yu
TechNet Community Support

Various FM areas are assigned to controlling area

Dear Sir,
While uploading budget throufh KP06 the error is coming :
Various FM areas are assigned to controlling area 6000
 Message no. F6097
Kindly suggest
Regards
Raj

Hello Raj,
There are many different reasons/options:
1) If you are on EA-PS package 200 you can try note 723605 to avoid the error message.
2) If you are not on EA-PS 200 (application release 4.7) the reason of the message F6097 is the following:
If for example Fund was activated in Customizing of Public Sector Management, it is not possible to assigned an company code to an controlling area, that is not FM relevant.
Please check if it is one assignment available. It can be field fund or the others available in the following SPRO settings:
SPRO -> Public Sector Management -> General Settings for Public Sector Management -> Basic Settings: Account Assignment Elements -> Activate Account Assignment Elements
Please check if you have activated Fund or Functional Area or Grant or Funded Program there.
How could you solve this problem: Please deactivate the fund (or the one that was active) temporary. Then assign FM area to Controlling Area. Then activate the fund again.
3) Please notice, the standard is the following:
COarea CCCC
 > CompCode 0001 > FMarea FFFF
 > CompCode 0002 > FMarea FFFF
 > CompCode NNNN > FMarea FFFF
All CompCodes, assigned to the same CO area have to be assigned the same FMarea. This is not so in your case. Because different local currencies in the assigned CompCodes you assigned FM areas with
corresponding currencies. Result: The assignment COarea < > FMarea (via the CompCodes) is not ambiguity. This is what the error message of KP06 is saying (note 908908).
If you want change the currency settings in CompCodes to assign only one FMarea to all CompCodes maybe you have to covert the existing transaction data, too (see notes 89531 and 39919).
But I found a modification note 779180 it meets your assignments.
Please check that. Maybe it have to be extend that KP06 will work also then. I'm not sure if it will also work if you assign these CompCodes to the same COarea.
4) The relation between FM-area and CO-area can only be 1 to n. Because there is no direct relation between FM- and CO-area, you have to check the relations between the assigned company codes to FM- and CO-area. Please read the doumentation under the path:
Public Sector Management -> Funds Management -> Master Data -> Enterprise Structure - Organizational Units -> Organizational Structures - Assignments.
I hope it helps to resolve your issue.
Kind Regards,
Vanessa.

HT201272 Redownload songs that are marked as downloaded

I have automatic download enabled on my itunes, however it appears that not all the tunes downloaded. They are marked as downloaded so i can't redownload them. How do I redownload the songs?

This really, blatantly doesn't solve the problem. I mean, it even says in the link you gave: iTunes shows you which of your purchases are available for download. You can view all of your past purchases, or just the ones not currently in your iTunes library. Items already in your library aren’t available for download.
So if you'd bothered to read the question, you'd see that this is exactly the problem SCPayne is having - iTunes claims the songs are in his library when they aren't.
What's the solution for THAT?

The font 'Didot' contains an invalid encoding. Some characters may not display.

I am receiving this message:
"The font 'Didot' contains an invalid encoding. Some characters may not display."
The message appears only in one form, not others. It appears only once, the first time I click on the form after opening it, then not again until I reopen the form.
The font is not embedded in the form and does not exist on my computer. The font is not employed in any field in the form or in its static elements.
Would appreciate any help in getting rid of this very annoying message.

KKKRRRGGG wrote:
I have a 2 page PDF form that is getting this error message every time I open the document.
"The font "HelveticaNeue" contains an invalid encoding. Some characters may not display."
The document has been in use for a year (never having this error message) and needed some updates. All that was changed was the addition of some extra fields and some options in one java script to reflect extra addresses in a drop down menu.
HelveticaNeue was in a PDF layout (from Illustrator) for the background but this variable was removed when I converted all fonts to curves (outlines) and replaced it in to my form. Under Properties>Fonts HelveticaNeue isn't even listed. All fields are Myriad Pro (triple checked) so I cannot understand how it is still an issue. It does not seem to have any impact on the document apart from the error message. It is hard to remove when it does not appear anywhere in the document except for the error message.
I have worked backwards and deleted all java scripts and it is still an issue. I have re-imported the background with active HelveticaNeue fonts and it is still an issue. Deleted any fields that relate to java scripts and it is still an issue. Tearing the hair out.....
Any help would be hugely appreciated as I would prefer to not have to start again from scratch.
Run FontBook and verify the Font. If defective open your System Install CD open Fonts. Drag this font to Desktop.
If you can Remove the defective font by draging to Trash (if system font you'll have to give username and Password) .
Then drag the copy on Finder in same folder dective was removed from
THen Restart Computer with shift key down. Hold down until a screen comes up where you must sign in. wait until screen fully loads. Now try the PDF. If works shut down Acrobat (or Reader) and the restart computer normally.
If this doesn't work do the repair located at: http://support.apple.com/kb/DL1377

ERP Integrator: Data Rows Marked as Invalid

Hi, I executed data write-back rules with "Import from source" option and met this warning:
"ERPI Process Start, Process ID: 19
ERPI Logging Level: DEBUG (5)
ERPI Log File: /tmp/aif_19.log
Jython Version: 2.1
Java Platform: java1.4.2_14
COMM Writeback Period Processing - Insert Periods into Process Details - START
COMM Writeback Period Processing - Insert Periods into Process Details - END
COMM GL Writeback Load Data - Load TDATASEGW - START
Import Data from Source for Period 'Apr-11'
Total Data Rows Imported from Source: 13
COMM GL Writeback Load Data - Load TDATASEGW - END
COMM Update Data - Update TDATASEG_T/TDATASEGW - START
Processing Mappings for Column 'UD1'
Data Rows Updated by 'DEFAULT' (LIKE): 13
Processing Mappings for Column 'UD2'
Data Rows Updated by 'DEFAULT' (LIKE): 13
Processing Mappings for Column 'UD3'
Data Rows Updated by 'DEFAULT' (LIKE): 13
Processing Mappings for Column 'UD4'
Data Rows Updated by 'DEFAULT' (LIKE): 0
Processing Mappings for Column 'ATTR1'
Data Rows Updated by Account Type: 13
Warning: Data rows with unmapped dimensions exist
Data Rows Marked as Invalid: 13
Warning: No data rows available for Export to Target
Total Data Rows available for Export to Target: 0
COMM Update Data - Update TDATASEG_T/TDATASEGW - END
COMM End Process Detail - Update Process Detail - START
COMM End Process Detail - Update Process Detail - END
ERPI Process End, Process ID: 19
Staging rows are marked invalid, so data can't be write back to the Ebusiness database. I searched metalink but no luck. Please help!

Am having similar issues. Please help
ERPI Process Start, Process ID: 44
ERPI Logging Level: DEBUG (5)
ERPI Log File: C:\Users\hyperion\AppData\Local\Temp\/aif_44.log
Jython Version: 2.1
Java Platform: java1.4.2_08
COMM Process Periods - Insert Periods - START
COMM Process Periods - Insert Periods - END
COMM Process Periods - Insert Process Details - START
COMM Process Periods - Insert Process Details - END
LKM EBS/FS Extract Type - Set Extract Type - START
LKM EBS/FS Extract Type - Set Extract Type - END
LKM EBS/FS Extract Delta Balances - Delete Obsolete Rows - START
LKM EBS/FS Extract Delta Balances - Delete Obsolete Rows - END
LKM EBS/FS Extract Delta Balances - Load Audit - START
LKM EBS/FS Extract Delta Balances - Load Audit - END
COMM End Process Detail - Update Process Detail - START
COMM End Process Detail - Update Process Detail - END
LKM EBS/FS Extract Type - Set Extract Type - START
LKM EBS/FS Extract Type - Set Extract Type - END
LKM EBS/FS Extract Delta Balances - Delete Obsolete Rows - START
LKM EBS/FS Extract Delta Balances - Delete Obsolete Rows - END
LKM EBS/FS Extract Delta Balances - Load Audit - START
LKM EBS/FS Extract Delta Balances - Load Audit - END
COMM End Process Detail - Update Process Detail - START
COMM End Process Detail - Update Process Detail - END
EBS/FS Load Data - Load TDATASEG_T - START
Import Data from Source for Period 'Jan 1, 2013'
Monetary Data Rows Imported from Source: 1750
Total Data Rows Imported from Source: 1750
EBS/FS Load Data - Load TDATASEG_T - END
COMM Update Data - Update TDATASEG_T/TDATASEGW - START
Warning: Data rows with zero balances exist
Zero Balance Data Rows Deleted: 171
Processing Mappings for Column 'ACCOUNT'
Data Rows Updated by 'DEFAULT' (LIKE): 1579
Processing Mappings for Column 'ENTITY'
Data Rows Updated by 'Entity Rule' (LIKE): 1579
Processing Mappings for Column 'UD1'
Data Rows Updated by 'Version Rule' (LIKE): 1579
Processing Mappings for Column 'UD2'
Data Rows Updated by 'Ministry Dataload Rule' (LIKE): 1579
Processing Mappings for Column 'UD3'
Data Rows Updated by 'Location Dataload Rule' (LIKE): 1579
Processing Mappings for Column 'UD4'
Data Rows Updated by 'Section Dataload Rule' (LIKE): 1579
Processing Mappings for Column 'UD5'
Data Rows Updated by 'Fund Dataload Rule' (LIKE): 1579
Processing Mappings for Column 'UD6'
Data Rows Updated by 'Subsector Data load Rule' (LIKE): 1579
Processing Mappings for Column 'UD7'
Data Rows Updated by 'Program Dataload Rule' (LIKE): 1579
Warning: Data rows with unmapped dimensions exist
Data Rows Marked as Invalid: 1579
Warning: No data rows available for Export to Target
Total Data Rows available for Export to Target: 0
COMM Update Data - Update TDATASEG_T/TDATASEGW - END
COMM End Process Detail - Update Process Detail - START
COMM End Process Detail - Update Process Detail - END
EBS/FS Load Data - Load TDATASEG_T - START

Views, Procedures, Triggers being marked as invalid

Oracle 11g 11.2.0.2
Windows 64-bit
Standard Edition
Why are Views, Procedures, Triggers being marked as invalid when there has been NO ACTIVITY against the database?
I can correct them today (by recompiling, no changes are necessary); however tomorrow the same Views, Procedures, Triggers will be marked as invalid.
I can guarantee that there has been NO ACTIVITY in that time frame.
Is there some view I can check to verify that there was no activity in that timeframe?
Thanks

I modified your query slightly, so I could see the results for the schema owner:
SELECT *
FROM   user_objects
WHERE last_ddl_time > (SELECT Max(last_ddl_time) - 1
                        FROM   user_objects)
Here are the results:
{Code}
OBJECT_NAME                        SUBOBJECT_NAME   OBJECT_ID DATA_OBJECT_ID OBJECT_TYPE CREATED                  LAST_DDL_TIME            TIMESTAMP           STATUS TEMPORARY GENERATED SECONDARY NAMESPACE EDITION_NAME
S1_CONTRACT_FORMAT_VIEW                                116264                VIEW         16-JUL-2012 02.13.03 PM 15-MAR-2013 04.28.42 PM 2012-07-16:14:13:03 VALID   N         N         N                  1
S1_QUANTITY_ENTRY                                      113211         113211 TABLE        16-JUL-2012 02.01.19 PM 15-MAR-2013 04.30.15 PM 2013-03-15:16:30:15 VALID   N         N         N                  1
S1_PLC_DATA                                            113432         113432 TABLE        16-JUL-2012 02.01.51 PM 15-MAR-2013 04.30.30 PM 2013-03-15:16:30:30 VALID   N         N         N                  1
FIN_BALANCE_FORWARD_LOCATION                           161145         161145 TABLE        15-MAR-2013 04.27.58 PM 15-MAR-2013 04.28.32 PM 2013-03-15:16:27:58 VALID   N         N         N                  1
PK_FIN_BALANCEFORWARD_LOCATION                         161146         161146 INDEX        15-MAR-2013 04.27.58 PM 15-MAR-2013 04.27.58 PM 2013-03-15:16:27:58 VALID   N         N         N                  4
FIN_BALANCE_FORWARD_LOCAT_NDX1                         161147         161147 INDEX        15-MAR-2013 04.28.20 PM 15-MAR-2013 04.28.20 PM 2013-03-15:16:28:20 VALID   N         N         N                  4
FIN_BALANCE_FORWARD_LOCAT_NDX2                         161148         161148 INDEX        15-MAR-2013 04.28.20 PM 15-MAR-2013 04.28.20 PM 2013-03-15:16:28:20 VALID   N         N         N                  4
S1_COMMODITY_TESTER                                    161149         161149 TABLE        15-MAR-2013 04.29.51 PM 15-MAR-2013 04.30.03 PM 2013-03-15:16:29:51 VALID   N         N         N                  1
PK_COMMODITY_TESTER                                    161150         161150 INDEX        15-MAR-2013 04.29.51 PM 15-MAR-2013 04.29.51 PM 2013-03-15:16:29:51 VALID   N         N         N                  4
9 rows selected But, I now have 9 Functions that afre marked as invalid; if I do a recompile they are OK.
There was NOTHING happening to that database; it was a WEEKEND whn no-one would access it.

Error: The font 'HelveticaNeue-UltraLight' contains an invalid encoding.

Keep getting this warning everytime I open a form I'm working on. "The font 'HelveticaNeue-UltraLight' contains an invalid encoding. Some characters may not display." Have found several threads about this but none with any good answers it seems. Anybody encounter this one yet?
Thanks!

Might have solved it in a round about way. Exported all pages out seperately and then re-assembled them and the error went away.

Views, Procedures, Triggers marked as invalid

Why are Views, Procedures, Triggers being marked as invalid when there has been NO ACTIVITY against the database?
I can correct them today (by recompiling, no changes are necessary); however tomorrow the same Views, Procedures, Triggers will bemarked as invalid.
I can guarantee that there has been NO ACTIVITY in that time frame.

Hi Murray,
Perhaps you are correct about there being no activity in your database to invalidate those objects. But what about dependencies on remote DB objects that could have been invalidated (perhaps dropped and recreated)?
http://docs.oracle.com/cd/B19306_01/server.102/b14220/depend.htm
You may wish to use SQL Developer's object viewer Dependencies tab to check for that possibility. And I wonder about dependency management using timestamps, considering the recent switch to daylight saving time in much of the world.
Regards,
Gary
SQL Developer Team

After updating to v. 24.0 (and restarting) ALL add-ons (regardless whether they work or not) are marked "(disabled)", and clicking Enable button does nothing

After updating to v. 24.0 (and restarting, several times) ALL add-ons (regardless whether they work or not) are marked "(disabled)". I tried clicking "Enable" button for each add-on and nothing happened. There is only one add-on which is marked as incompatible with this version (but it was also incompatible with previous version, and so marked).
Clicking "Update Add-ons", gives a short list of add-ons but "Install Updates" button is pale and doesn't work. I can only sort list by name or last update.
Also, I disabled Ask Toolbar and that went well. When I click "Enable" button (button works ONLY for this add-on) it takes forever to get note: “Ask Toolbar will be enabled after you restart Firefox”, I used to get this info in seconds time before this update. (I do not really want Ask Toolbar, I just used it to see whether if I disable and then enable an add-on might do the trick.)
Bottom line – I can not tell if add-on works (i.e. if it is enabled or disabled) unless I try using it.
Even when I posted this question and installed Troubleshooter, it's also marked as "(disabled)"

You're welcome
Are this screenshots from an extension window because the built-in about:addons page looks different?

Trying to create a new playlist but several songs are marked with exclamation mark and will not transfer into playlist - any advice?

I have never had trouble creating playlists before but quite a few songs will not transfer and ate marked at the side with an exclamation mark. I know ZERO about technology so if you can help me in very simple language, I would be very grateful! I am wondering if it may have something to do with the fact that I have had to start new accounts when I have moved countries, on order to be able to use the credit card of the new country in the Itunes store of that country... I am in Aus and have bought a lot of tunes here but last year I was living in Brunei and, in order to use my brunei credit card ( as it was the only one with money in it) , I had to set it up as different to my Aus account. Could this be the issue? prior to Aus my account was in Ireland. I have paid for all these songs but it seems I cannot now use some of them... Please help!!! Thanks in advance for any assistance you can offer, Lisa

The exclamation mark next to a song means it is no longer where iTunes is looking for it. iTunes won't let you add such "missing" songs to a playlist. Possible reasons for a song going missing are that you or some third party software has moved or deleted it, or a folder that contained it, or that the drive it lives on has had a change of drive letter, or a configuration file has changed making iTunes look in a slightly different place from before.
Select one of the songs with an exclamation mark, press CTRL+I to Get Info, say no when prompted to locate it, then note down the location from the Summary tab that begins file://localhost/ - please post back this path as given. Hopefully you can find the file this entry in your library is supposed to be connected to. Assuming you can please post back this path as well. These two items of information may suggest a fix through folder manipulation or a configuration change.
If things have got a little more disorganized then, as long as the tracks still exist to be found, my FindTracks script should be able to reconnect them to iTunes. FindTracks uses some fuzzy matching routines and searches for multiple potential locations. For more details see this thread. Start by selecting the tracks of a single album and then run the script. Your media folder should normally be detected automatically, e.g. as C:\Users\<User>\iTunes\iTunes Media, but you can edit the path if it is wrong or a particular batch of lost files are stored at another path. If it works as expected you can then move on to fixing the rest of the library in bigger batches.
tt2

Front End says: All gateways are marked down

Hi,
My Front Ends has started to sing a song like:
Log Name:      Lync Server
Source:        LS Outbound Routing
Event ID:      46046
Task Category: (1038)
Level:         Error
Description:
A call to a PSTN number failed due to non availability of gateways.
Called Number: +123456789
Phone Usage: PSTN1
Route: Route1
CallId: 2ce0....
Cause: All gateways available for this call are marked as down.
Resolution:
Verify that these gateways are up and can respond to calls.
Of course I would like to see how Lync see those statuses. How often they goes down etc..
Any idea how to see GW statuses? Some performance counter perhaps?
Petri

It use SIP OPTIONS for keep alive. If the GW fail to reply to 5 consecutive OPTION requests, Lync server will mark the Gateway as "Down" and it will not send any calls to that gateway here after. Once the Gateway is up, you might need to restart
the mediation service to make it start chatting again
http://thamaraw.com

When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can you please help me?

When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can anyone please help me?
Sincerely,
Eric

Run this when you have the problem and post the results here.
EtreCheck
This will tell us what is loaded

How can I unmark photos which are marked for republish to Flickr?

I am currently using Lightroom 3 to publish photos to Flickr. I have a free Flickr account.
My problem is that I have a set of photos I am publishing to flickr. For some reason some of my photos lost their keywords, only the files on my computer lost them, the photos on Flickr still have the keywords intact. Also I applied a colour code to a couple of the photos on my hard disk that are being published to Flickr.
Now Lightroom has detected these changes and the photos appear under 'Modified Photos to repblish' the thing is the changes I made were either putting keywords back in that were already in Flickr anyway, and colour coding which makes no different to flickr. Because I have a free account if I republish the photos I will lose all the comments and stats on Flickr, so I don't want to republish them.
Whenever I click the publish button I get a warning that republishing the changed photos will lose any information on flickr and I have the option to skip them, and just publish new photos. But if I ever do want to republish a photo I won't be able to do this without also republishing all the photos marked for republish.
Is there any way I can remove these photos from the republish list?

All,
This is an issue with the LR programming, as it does NOT allow you to unmark images it feels need to be republished. Oftentimes it's only a matter of adding a keyword or tweaking the develop settings that triggers this. I for one wish that choice was available.
Here's what you can do: simply disconnect from the Flickr service. Doing so will have NO detrimental effect on the images in Lightroom or the images you have already uploaded to Flickr. What you will lose, however, is the "library" of images that you have already uploaded to Flickr. Since this is really only a collection there's no harm. Besides, if you need to review which of your images have been uploaded to Flickr at a later time, just reference Flickr. Oh, you'll also lose Lightroom's ability to download any comments your Flickr contacts make on your uploaded images. If it's important for you have that data in Lightroom, rethink the disconnect option. After disconnecting, reconnect using the same parameters you had before. Your Lightroom/Flicker collection will be cleared of all previously uploaded images and you can begin adding new images to upload.
Again, disconnecting has no effect on your Flickr content. However, if you REMOVE images from the collection using Lightroom, they will also be removed from Flickr. Please understand the distinction between disconnecting from the Service and removal of images using Lightroom.
All that being said, republishing images from Lightroom to Flickr, in my experience, should not cost you anything in terms of number of views, favorites, comments, etc. It should be seamless.
Judson Rhodes, Photographer
www.flickr.com/jrcp/show
www.judsonr.com
Date: Tue, 29 Mar 2011 09:43:18 -0600
From: [email protected]
To: [email protected]
Subject: How can I unmark photos which are marked for republish to Flickr?
Hi,
I'm using LR 3.2 and am having the same issue. I see that no one from Adobe has replied to this and that the previous reply was from August, 2010. There seem to be no answers to this one...
I have several images that LR feels should be republished, and ONE image that I want to republish. I CAN'T republish just that one image though without republishing ALL the other images.
Can someone (maybe someone from Adobe) help me with this? How can I simply UNmark the other images to not be republished? I do not want to remove them from the collection, but simply do not want to republish them at this time.
Why can't Adobe simply ask us if an image should be republished or not? Why can't they allow us to UNmark an image to be republished once it's marked?
Ideas?? HELP!
Thanks!
Steve
>

[solved] Various MP3s are marked as [invalid encoding] with Quod Libet

Similar Messages

Maybe you are looking for