[Solved]Vbox 3.1.2 - Bridged networking stopped working on Arch guest

After upgrading Virtual Box to 3.1.2 (both ose and puel versions apply here) bridged networking stopped working on an Arch guest which I use as a test server.
While writing this post I solved the problem. What I did was to enable NAT on the first adapter and Bridging on the second. After booting into to the guest I did the following;
# ifconfig eth1 up
# dhcpcd eth1
I shutdown the guest and removed the NAT adapter so only the bridged one remained, booted it and voilá for some mysterious and unfathomable reason bridging now works again.

After upgrading Virtual Box to 3.1.2 (both ose and puel versions apply here) bridged networking stopped working on an Arch guest which I use as a test server.
While writing this post I solved the problem. What I did was to enable NAT on the first adapter and Bridging on the second. After booting into to the guest I did the following;
# ifconfig eth1 up
# dhcpcd eth1
I shutdown the guest and removed the NAT adapter so only the bridged one remained, booted it and voilá for some mysterious and unfathomable reason bridging now works again.

Similar Messages

  • Adobe bridge has stopped working windows 8

    I recently installed adobe bridge cs6 on a windows 8 computer and when the program launches and i browse to a folder with images I see "adobe bridge has stopped working" and the program crashes. Any Idea what I can do to solve this?

    I am having this same problem, but I am using windows 8.1  (64 bit) -  Toshiba Click 2 pro, 1920 x 1080 resolution.
    I just installed Design Standard CS6, everything said these would be compatible,
    http://helpx.adobe.com/x-productkb/global/windows-8-1-compatability.html
    https://www.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductViewerWithDefaul tFilters?TempOsid=Windows%208.1&Locale=en-us&Architecture=X64&TextSearch=adobe%2Bdesign%2B standard%2Bcs6&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance& Compatibility=Unknown&LastRequested=14
    but I"m having problems with Bridge CS6, Acrobat X, Photoshop CS6 64-bit and Illustrator 64-bit.
    What to do?!

  • "Adobe Bridge has stopped working"

    Just installed CS2 Version 9.0.  Having "Adobe Bridge has stopped working"  Windows 7 Pro 64.  Is there a solution to this problem?
    Thanks?

    Curt,
    Thanks for getting back to me.
    Bridge had worked before.  When I refer to BRIDGE I mean that I go to a
    folder of photos in PS and select file/browse to open.  This feature
    does work with other folders of photos.  It was when I downloaded photos
    from my cell phone into a folder and in PS went to file/browse the
    browser will open and then I get a message "Adobe Bridge has stopped
    working."
    I can still go to another photo folder in PS and select file/browse and
    it will work, the problem is with the photos from my cell photo.
    Do you have any ideas.
    I have the latest  versions of PS.
    Thanks,
    Jack

  • Adobe Bridge (CS6) Stopped Working & Application Manager Fails No Matter What

    Adobe Bridge (CS6) Stopped Working & Application Manager Fails No Matter What I do.
    I have uninsalled, ran the cleaner, installed, and Bridge will not open, Application manager will not run.
    It
    Win 7 x64 Pro
    CS6
    Thanks

    Good luck with that, and don't forget to deactivate CS6. 
    My system is slowing down after nearly two years, and I am dreading a reinstall - there always seems to be something you have forgotten!  What really worries me is what happens to existing raid0 arrays seeing as the mainboard needs drivers.   They are backed up, but I just don't trust a single level backup, and will have to add a further 3Tb of drive space to make a straight copy of the raid0 arrays.  I also like the idea of Windows 8.1, but dread finding out that the drivers don't work!
    The Premiere Pro hardware forum is the perfect place to ask about stuff like that.  Harm, Bill, Erik etc. are super clued up on such things, so I shall run my concerns past them before committing. 
    So I wish you good luck again, and I know you'll make a plan before going ahead with it.

  • **Bridge  Has stopped working

    I'm having a problem with my Bridge. As soon as I attempt to open I recieve an Error message "Adobe Bridge has stopped working" (it won't even open). I'm running Vista and I've never had this problem. I recently added a printer drive for Epson r-1800. Has anyone had this problem before.

    you should probably check in the bridge forum...
    http://www.adobeforums.com/cgi-bin/webx?14@@.3bb8a3bf

  • Bridge suddenly stopped working

    Hello everybody,
    My Adobe Bridge just stopped working without any reason.
    An hour ago i used it without any problems, now when i start it, the program freezes instantly and the only thing i can do is close it.
    I read the sticky topic on it, and i tried installing the newest graphic driver and removing 3rd party plugins. I couldn't find the preferences so i could not reset them.
    Does anybody have any idea how i can make my bridge work again ? Because this is REALLY annoying.
    Thanks in advance !
    Kindest regards,
    mambo88

    Yes i am, my pc settings are pretty much the same as when Bridge worked.
    It was really weird; i was just using PS and Bridge untill i was finished. Then i closed both, but after a while i remembered i had to do some additional photoshopping so i opened both programs again. Ever since then bridge wouldn't start anymore.

  • My phone fall down and suddenly the network stopped working can't find for any coverage, And I already reset the all settings and network settings!!! plz help me

    my phone fall down and the network stopped working can't search to any coverage

    It is not properly connected to the network.
    Make sure location is set correctly
    DNS should be on auto (settings - general - network)
    Try ethernet
    Signal strength on device won't account for issues, you would need a network report from istumbler, netstumbler or similar. This will show accurate signal strength along with noise and nearby networks

  • SOLVED: W510 Wired Network Stops working

    I had a problem with a W510 I ordered with Windows 7 32 bit. At random times, the exclamation point icon would appear over the network icon in the system tray, and the network adapter would no longer be recognized. I could use the built in Windows facilities to reset the adapter, but it would quickly fail again. The only cure was to restart the machine, which was annoying. Wireless networking was not affected - just the wired Ethernet connection.
    I downloaded the latest drivers from the Lenovo site and that did not fix it. I have had numerous Thinkpads over the past 12 years and have NEVER had any sort of hardware fault before, so I doubted that it was a hardware fault. Therefore I wiped the machine clean and installed 64 Bit Windows 7 instead.
    The first problem I had after installing Win7 x64 was that the internal USB controller was not recognized by Windows. Therefore, USB devices (i.e. my thumb drive with all the x64 Lenovo drivers on) were no longer recognized. Therefore, I burned the x64 drivers to a CD and used that instead.
    All the devices including the USB controller then came to life, and it looks like the problem has been completely solved.
    I post this, in case anybody else has such a problem. 

    I just started seeing this issue with my pen silo.  The Wacom tablet component has completely stopped working, and I'm seeing "USB device not recognized" every time I insert and draw out the pen.  My guess is that all the peripheral components in the tablet are connected to the motherboard via crappy silver trace ribbon cables, and they're susceptible to the tiniest amount of flex, heat, and disruption.
    Since the USB device is, at least in my case, still operating well enough to report that it is having trouble, I'm guessing that the issue is transient, but that doesn't fix my problem - and probably won't fix yours.  I'd recommend getting a refund.
    Here's how to see if the device is reporting a problem:
    1) Wait until you see the "USB device not recognized" message again.
    2) CTRL+X -> Device Manager
    3) Other Devices -> double-click "Unknown device"
    4) Go to "Details" tab
    5) Select "DevNode status" from the drop-down; the Value pane will have DN_HAS_PROBLEM on one of the lines.
    6) Select "Problem code" from the drop-down; the Value pane will likely show "0000002B", or Microsoft USB problem code 43 in decimal.

  • [SOLVED] Brother DCP-7065DN in a Network: Scanner works, Printer not.

    Hi all,
    I am aware of the fact that there is a similar thread, but the issue isn't really solved there.
    https://bbs.archlinux.org/viewtopic.php?id=109570
    I've got a shiny new DCP-7065DN, which works ok in Ubuntu as a network printer and scanner.
    I was forced to use Brother's official rpm's, since foomatic doesn't support this model yet.
    Now with my Arch 64, I've managed to get the scanner running (after a lot of playing).
    But unfortunately, I only manage to print a testpage from CUPS, and that was it.
    Other than that, the file is getting sent and Brother's LCD says: "receiving data", but nothing happens.
    $ tail -n 100 -f /var/log/cups/error_log
    E [29/Jul/2011:21:39:45 +0200] [CGI] Unable to create avahi client: Resource temporarily unavailable
    E [29/Jul/2011:21:39:45 +0200] [cups-deviced] PID 12846 (dnssd) stopped with status 1!
    $ lpstat -t
    scheduler is running
    no system default destination
    device for Brother_DCP-7065DN: lpd://BRN001BA97640CF/BINARY_P1
    Brother_DCP-7065DN accepting requests since Fri 29 Jul 2011 23:12:34 CEST
    printer Brother_DCP-7065DN is idle. enabled since Fri 29 Jul 2011 23:12:34 CEST
    Data file sent successfully
    What I tried to solve the problem
    After reading through *many* forums (not only Arch) I tried the following.
    Install a2ps
    Result: It is printing! It prints all documents as postscript, but in text-mode. Shouldn't the official driver be able to interpret a postscript file as something else than plain text? Am I missing something? This could be the key, since it is printing at least. Uninstalled.
    Uninstall cups and reinstall.
    According to some threads, starting avahi-deamon resolves the problem. It doesn't so with me.
    What I didn't try (yet)
    udev rule. However, in my case it seems not likely to be the way to go, since I do not print via USB
    Sometimes I am able to print from Firefox, sometimes not.
    The same goes for Pdf's printed from Evince....
    Has anyone had similar issues? How was it resolved?
    Last edited by fubar0 (2011-08-01 11:48:28)

    Dear Fellows,
    Downgrading the package "file" to Version 5.04 did the trick for me immediately.
    The printer has been working for a while now consistently, and I am confident to say that this really solved the problem and wasn't just luck.
    However, you need to make sure that "file" doesn't get updated when doing your regular system update.
    If you are interested in the full story: I posted a Guide how to install the DCP-7065DN (and probably other new brother devices) here.
    Regards
    Last edited by fubar0 (2011-08-01 17:35:05)

  • TC guest network stopped working after last update

    Hi, I got the new 2TB TC. And it was working fine. Since I updates it to 7.7.3. The guest network stopped assigning IPs. I can see it and change the settings but I can't join it anymore. It was working fine before.
    I Am setting it from iOS devices not a Mac.
    The TC is in bridging mode.
    I Also tried restoring it to default settings.
    Any ideas how to fix this?
    Thank you.

    I had it working right out of the box when I bought it, there was no double NAT warning or error message, unlike now I have to ignore the double. NAT error message for the light on the TC to turn back to green again.

  • Network stops working in Tecra M9 with Vista OS?

    We have four Toshiba tecra M9 (2.2ghz T7500 processor) laptops with factory installed windows vista business version and one with fresh non toshiba installation of Vista Ultimate version. All these laptops have exactly same problem.
    Network sometimes stops working and nothing but restarting computer helps?
    Thing is that usually you cant event restart computer because it hangs to logging off or to shutting down state.
    Theres no clear reason to this hang and it happens now and then.
    Sometimes many times a day and sometimes it works for days. Doesnt matter if you are docked or undocked. We have several desktops pcs and other brand laptops with exactly same configuration/programs and no problems.
    Any help would be great because users are not very pleased to this situation and we wouldnt want to change back to windows XP (which is working in M9 without problems).

    All vista updates are installed to all these computers. BIOS is newest 1.50 that is available from web site. Toshiba Value Added Package for Windows Vista (v1.1.7; 12-14-2007; 38.89M) package is only new driver that has released from Toshiba since purchase of these machines. Four factory installed Vista M9 models have original driver versions (not sure if they are newest ones). One Vista Ultimate has drivers downloaded from Toshiba support site and it even has Vista Servicepack 1 RC-1 version installed.
    I installed that new value added package two days ago and no networks hangs yet but still have to wait because it might work for week and then start hanging again.

  • Bridged networking not working with nested VMware Workstation

    I am having an issue that I can't seem to find any answer to.... 
    We are running Vsphere 5.5 and I have 2 Guests each running Windows 7 64-bit.  Each of these guests has VMware Workstation 10 running on them.  When we P2V the systems we followed all the instructions to allow nested VMware Workstation.  However, we are running into an issue where the Bridged Networking will not work.  Both of the Win7 guests are on the same vlan and all of the VMs in Workstation are on the same network as well.  However, while the 2 Windows 7 guests can ping each other and each of the guests can ping the VMs that are hosted locally, they cannot connect to the systems on the other guest running workstation.
    I tried to upgrade the Guest NIC to VMXNet3, but that did not help. 
    All of the research I have done brings me to people who are having the opposite problem (ESXi nested in VMware Workstation). 
    How can I get the 2 bridged networks to connect?
    Thanks!

    The ESXi vSwitch to which the outer guests are connected must be configured for promiscuous mode and forged transmits.

  • IPhone 5 data network stops working when using GPS

    Hello,
    I have a strange problem for some time now. The DATA connection in GPS apps stop working when navigating. When I use Google maps or WAZE apps the first time after rebooting the device, everything is working just fine for first address search, but after beginning the navigation, DATA network disappears only for the navigation app, browsing is working just fine (a bit slowly, but fine).
    Tried to factory reset the device few times, and changed the carrier provider, didn't help
    Any ideas??? 

    Hi liokap,
    Welcome to the Apple Support Communities!
    I know that it can be frustrating when applications you downloaded from the App Store do not function as expected. In this situation, I would recommend working through the troubleshooting steps in the attached article.
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
    Have a great day,
    Joe 

  • Upgraded from 10.6 to 10.6.2, network stopped working on an iMac.

    Went to the Apple store yesterday, bought Snow Leopard. Installed it, everything seemed to work fine at 10.6.0. Did Software Update, it said there was a 10.6.2 update (guess it combined 10.6.1 and 10.6.2 into one?), so I downloaded it, it installed and rebooted. Ever since then, I can not get networking to work, using either cabled gigabit ethernet, or wireless to a Time Capsule wireless access point.
    Trying rebooting several times, disabling/re-enabling networking, no help. It sees the router, gets a local ip address, can ping the router, but can't get to the outside world.
    This is an older iMac, 24", "white plastic soapdish" model, before the newer models came out. I'm hoping someone can provide some other hints.

    You mentioned having a network problem. Regardless, being able to get to the outside world is a common problem under Sno. Adding a new location has worked for some.
    Go System Preferences > Network > Location.
    Edit location (whatever name you want).
    Click + and then click done.
    Try your browser.
    And, here is another possibility that has worked for others.
    Go Finder > Your HD > Library > Preferences > SystemConfiguration.
    Move the SystemConfiguration folder to your Desktop.
    Restart.
    Try your browser.
    Try something a little different.
    Go Finder > Your HD > Library > Preferences > SystemConfiguration.
    Move the SystemConfiguration folder to your Desktop.
    Go System Preferences > Network > Delete all locations, and use Automatic.
    Restart.
    Try your browser.
    You may have to reconnect to your wireless network if applicable. And, you may need to go System Preferences > Sharing and re-enter your computer's name. Check what name is given in sharing before following my instructions. If problems develop, then your can move the original folder back where it started—overwriting any folder recreated.
    Finally, try deleting any KeyChain entries related to the apps, etc., you mention.

  • Hyper-V bridge (Wi-Fi external network) stopped working

    Well, that: Used to work, had to remove it. I added it back a couple of hours later and now it isn't working.
    I can bridge the connections and Wi-Fi seems to connect. But the other connection won't work on the parent OR child machine. I also tried a "regular" bridge with the same result; doesn't seem related to Hyper-V itself but to networking.
    I'm not sure where to start looking what went wrong. Seems the bridged adapter is not getting anything from the Wi-Fi at all (doesn't even recognize the network or get IP).
    I don't need a workaround, I just need to troubleshoot what got messed up with the network bridge. Please, any help will be welcome.

    Hi.
    Thank you for your sharing and update.
    If any further questions, please feel free to ask in Technet forum.
    Best regards
    Michael Shao
    TechNet Community Support

Maybe you are looking for