[SOLVED] Verbatim USB headphones not detected

I did use this head set once when I bought them in september and they showed up in gnome's pulseaudio-mixer-applet. I can't recall installing anything, just plugged them in...
However when I tried today nothing appeared, and dmesg gives med this:
usb 1-5.2: new full speed USB device using ehci_hcd and address 4
usb 1-5.2: device descriptor read/64, error -32
usb 1-5.2: device descriptor read/64, error -32
usb 1-5.2: new full speed USB device using ehci_hcd and address 5
usb 1-5.2: device descriptor read/64, error -32
usb 1-5.2: device descriptor read/64, error -32
usb 1-5.2: new full speed USB device using ehci_hcd and address 6
usb 1-5.2: device not accepting address 6, error -32
usb 1-5.2: new full speed USB device using ehci_hcd and address 7
usb 1-5.2: device not accepting address 7, error -32
Does anyone know if something is changed in pulseaudio or kernel or anything?
Last edited by toffyrn (2010-10-25 12:19:27)

Ah. Looks like hardware fault. Windows presents it as "not recognized".
Strange thing is, i used it playing Fallout this morning. Thats why I assumed it was a linux problem...

Similar Messages

(Solved) [Intel HDA] Headphones not detected

Hi there,
I'm having an annoying issue since I've installed (and re-installed) Arch on my netbook.
Everything's alright (except Gnash, but I'll google that later), the internal speakers work perfectly but when I put my headphones or my speakers (ext.) the internal speakers are "muted-off" (so the jack is detected, right?) but nothing's coming out from my headphones/speakers.
Here's my aplay -l out :
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: CONEXANT Analog [CONEXANT Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: Conexant Digital [Conexant Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
And here is my amixer output:
Simple mixer control 'Master',0
Capabilities: pvolume pswitch pswitch-joined
Playback channels: Front Left - Front Right
Limits: Playback 0 - 65536
Mono:
Front Left: Playback 65536 [100%] [on]
Front Right: Playback 65536 [100%] [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch cswitch-joined
Capture channels: Front Left - Front Right
Limits: Capture 0 - 65536
Front Left: Capture 27636 [42%] [off]
Front Right: Capture 27636 [42%] [off]
and a lspci | grep Audio output:
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)
My headphones are plugged-in since I booted.
Another problem is that when I'm launching alsamixer there's only the master (Card: PulseAudio - Chip: PulseAudio). So, I make F6 > "1 HDA Intel" and I have other channels :
Master (100 & unmuted) - PCM (100 & unmunted) - Mic (0 & muted) - S/PDIF (muted) - S/PDIF Default PCM (unmuted) - Beep (86 & muted) - Internal Mic (0 & muted) -- (Card: HDA Intel - Chip: Conexant CX20549 (Venice))
This is strange because on my former installation of Arch (on the same PC) the "default" alsamixer had exactly the same channels and the "Master only" didn't 'exists'. (But I had the same problems).
I tried a bunch of solutions I found but none worked.
alsa-utils alsa-plugins & alsa-oss are installed (base-devel too if it can help).
I'm using SLiM & Cinnamon and had the same issue with LXDM & LXDE (same computer).
So if somebody could gave me a little bit of his light it'll be much appreciated!
Thank you, Flaco
*Edit: Since I've rebooted with the headphones plugged-in the internal speakers don't work neither... but it may be something else; I tried a lot of solutions so maybe there's conflict between some files and/or process...
**Edit: Internal speakers issue solved. I might have touched some stuffs on pavucontrol before... anyway, the headphones are still a problem...
***Edit: I've booted (on a live usb) on Lubuntu to see what's happening and... still no sound. The jack input might be broken; I'll open my computer to see what's happening and to repair (or not) it.
Last edited by Flaco (2013-07-04 00:19:57)

bump :x

USB devices not detected in VMware [SOLVED; Using Virtualbox instead]

I am running Arch as a host and XP on VMWare workstation 7. My primary purpose of installing XP on VMWare was to use my edit my Line6 POD (behaves as a usb sound card) and get my USB TV Tuner box to work. The big problem that I am facing is that VMWare is not detecting any USB device (not even my USB Hard Drive).
I have the usb controller installed.
Any suggestions?
Last edited by devadittya (2009-11-24 20:04:45)

I don't know vmware but with other virtual machines there is often a configuration option whether usb drives should be automatically mounted or not. Sometimes automounting also only works if the vm has the focus, i.e. is the active window.

[Solved]Usb Pendrive not detected

Hello, I have a xfce4 desktop and when i insert my flashdrive its not detected in thunar.
I have ticked the options to "mount removable device when inserted" and "mount removable drivers when hot-plugged".
What do I have to do to see my pendrive in Thunar!.
Thanks for reading
Last edited by Jean3799 (2014-06-24 06:00:36)

Make sure gvfs is installed.
sudo pacman -S gvfs
Read in the wiki here and here.

Hp Pavilion DV4-1235ee No sound & Usb port not detecting.

In my laptop Hp Pavilion dv4-1235ee there is no sound coming from the internal speakers. If I connect external speaker its works fine. Usb port is not detecting now. any help will be appreciated.

What is the current Operating system on your notebook? I suspect we have issue with internal speaker on hand...but would like to reinstall the Audio Driver and check...
Again for the USB, we can try and install Chipset driver and check...
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

SBH9150 philips bluetooth headphone not detected in macbook pro retina 13"

I just purchased an SBH9150 philips bluetooth headphone. But my macbook pro retina 13" could not detect it. Anybody can help? It is perfectly working with my iphone 5.

Unpair it from your phone and then try pairing it to your Mac.
Does the Mac see any BT devices like KB or mouse?

Phone USB disconnect not detected

On my one PC, PC Suite does not detect when I disconnect my E51 phone from the USB cable in PC Sync mode.
This one happens on this specific PC, so it must be a setup problem there.
I am running PC suite 6.85.14.1 on WinXP SP2 patched up to date. No problem on another box with same motherboard and software using the same phone.
If I connect in data transfer mode, I use the "safely remove hardware" function of WinXP before I disconnect and all is fine. This is not available in PC Suite mode.
If I unplug the cable from the phone in PC suite mode, PC Suite does not detect that the phone is disconnected, no matter how long I wait.
After this, the whole USB system seems to be confused. No other USB devices are detected when plugged into any other USB port. After reboot all is fine again.
I guess this is a Windows problem rather than a PC suite problem.
Any idea what is going wrong and how to correct this?

i had other similar problem with usb devices, maybe when we use more usb devices could be a conflict on system, does exist a tool that clean up all old usb connection?
bye.

USB Headphones Not Always Picking Up Audio

I have Logitech USB headphones that I use with Rosetta Stone. They work just fine. They will also work if I'm watching a video that's on my computer (using the Apple "DVD Player") or when listening to iTunes.
However, they don't work for any audio that streams via the internet. For example, on websites like Hulu or if watching a video on NBC.com it won't play the audio thru the headphones. If I unplug the headphones it will play thru the MacBook's internal speakers. If I plug the headphones it it will mute the internal speakers, but no sound comes thru the headphones.
Any ideas on this?

MKeaton1967 wrote:
Hi--
Thanks for responding. The USB Headset is set in system preferences for both input and output.
I went into Utilities-->Audio MIDI Setup. The USB headphones had all 3 icons next to it (finder, speaker, and microphone).
Not sure if this problem is related, but I also have a Bluetooth headset. Similar problem, works with iTunes and DVD player, but not with sound via Safari or Firefox. It has an additional problem, where my USB headset will work with Rosetta Stone, it won't respond with either audio or the microphone.
It's possible the browsers are hard wired to the Macs internal sound...
Nope, wrong, I just tried is using my RME audio interface, Firefox played a youtube video through whatever audio device I had set as default audio.
Sounds like Snow Leopard has a different Audio MIDI setup than Leopard. Under Audio MIDI setup I have both "Default Output" and "System Output" that I can use to set an audio device.
Depending on the USB device they need to be run as an aggregate device doubtful this will be of any help but you might take a look. This combines the USB audio device with the internal audio device... it's been known to help some programs "see" the USB audio,
http://www.apple.com/pro/techniques/aggregateaudio/
http://support.apple.com/kb/HT1215
Good luck, maybe someone running Snow Leopard could jump in here.
pancenter-

SOLVED Hp TrueVision HD " not detecting " =Solution

Hp TrueVision HD " not detecting " Solution
===============================
To the all guys have a problem like this
{{ your system can not detect the webcam or the name is not in the device list }}
There is a cable or socket which is connected to the webcam so the only reason cause this problem is about that socket
Now just open the fram of your laptop screen u will see a small socket right hand side of camera just make sure it is connected truely or u can make it totally disconnect then connect.
You can also check this video
http://www.youtube.com/watch?v=jOpS6GD0hZo
now u easily fixed it
good luck

Hi @MysteryBacon ,
Welcome to the HP Forums!
It is a great place to find answers and suggestions!.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I understand that you are having an issue with the WebCam and recording.
To be of assistance I need some more information.
What is your exact model of HP ENVY 14 SPECTRE do you have?
What Operating System are you running?
What are you trying to record?
Have you ran the HP Support Assistant to aid with any applicable HP updates?
Have you tried running MS Fix It to assist in overcoming difficulties?
Regards
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

X220: external USB keyboard not detected in BIOS

Hi!
I use an external USB keyboard attached to the port replicator of my X220. When Windows is booted the keyboard works without any problems. But I cannot use the keyboard pre-boot, e.g. to enter the HDD password after starting up, to configure the BIOS, etc.
I tried all USB ports both of the port replicator and the X220. The keyboard is still not detected by the BIOS (Version 1.20) and there are no BIOS options to enable "USB keyboard support".
Has anyone experienced similar problems? Are there any solutions to get the keyboard detected by the BIOS?
Thank you for your support!

@beastiesoft and earthartja,
If I am not mistaken, we are discussing this on the T series thread. Check here.
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T420-Not-recognizing-keyboard-before-OS-loa...
@someotherguy,
Drop you an email on this.
//JameZ
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD

USB Port not detecting device

My usb port on the side of the pc both are not detecting any device. How to fix it?

A good place to start troubleshooting is this HP document, Troubleshooting USB Connections (Windows 7).
If you don't have Windows 7 or if you have further problems, please to provide more information when you post again. The more information you provide, the more likely it is that you'll find someone here to help you.
Welcome to the forum,
GeorgeFN
GeorgeFN
I work on behalf of HP.

[SOLVED]Usb drive not detected in kde

not appear in the notification, but in dmesg appear
5458.314319] usb 2-3: new high-speed USB device number 4 using ehci-pci
[ 5458.508037] usb-storage 2-3:1.0: USB Mass Storage device detected
[ 5458.508098] scsi12 : usb-storage 2-3:1.0
[ 5458.508149] usbcore: registered new interface driver usb-storage
[ 5459.585989] scsi 12:0:0:0: Direct-Access USB DISK Pro PMAP PQ: 0 ANSI: 4
[ 5460.612052] sd 12:0:0:0: [sdb] 31260672 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 5460.613431] sd 12:0:0:0: [sdb] Write Protect is off
[ 5460.613434] sd 12:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 5460.614802] sd 12:0:0:0: [sdb] No Caching mode page found
[ 5460.614805] sd 12:0:0:0: [sdb] Assuming drive cache: write through
[ 5460.619671] sd 12:0:0:0: [sdb] No Caching mode page found
[ 5460.619674] sd 12:0:0:0: [sdb] Assuming drive cache: write through
[ 5460.642643] sdb: sdb1
[ 5460.649748] sd 12:0:0:0: [sdb] No Caching mode page found
[ 5460.649751] sd 12:0:0:0: [sdb] Assuming drive cache: write through
[ 5460.649753] sd 12:0:0:0: [sdb] Attached SCSI removable disk
[ 5476.956859] ath5k: ath5k_hw_get_isr: ISR: 0x00000400 IMR: 0x00000000
[ 5613.844729] usb 2-3: USB disconnect, device number 4
[ 5616.296689] usb 2-3: new high-speed USB device number 5 using ehci-pci
[ 5616.425854] usb-storage 2-3:1.0: USB Mass Storage device detected
[ 5616.425903] scsi13 : usb-storage 2-3:1.0
[ 5617.501846] scsi 13:0:0:0: Direct-Access USB DISK Pro PMAP PQ: 0 ANSI: 4
[ 5618.534031] sd 13:0:0:0: [sdb] 31260672 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 5618.535398] sd 13:0:0:0: [sdb] Write Protect is off
[ 5618.535401] sd 13:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 5618.536784] sd 13:0:0:0: [sdb] No Caching mode page found
[ 5618.536790] sd 13:0:0:0: [sdb] Assuming drive cache: write through
[ 5618.541762] sd 13:0:0:0: [sdb] No Caching mode page found
[ 5618.541765] sd 13:0:0:0: [sdb] Assuming drive cache: write through
[ 5618.564608] sdb: sdb1
[ 5618.571842] sd 13:0:0:0: [sdb] No Caching mode page found
[ 5618.571845] sd 13:0:0:0: [sdb] Assuming drive cache: write through
[ 5618.571847] sd 13:0:0:0: [sdb] Attached SCSI removable disk
uname -a
Linux tarro 3.13.5-1-ARCH #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014 x86_64 GNU/Linux
cat /etc/group
root:x:0:root
bin:x:1:root,bin,daemon
daemon:x:2:root,bin,daemon
sys:x:3:root,bin
adm:x:4:root,daemon
tty:x:5:
disk:x:6:root,darkmind
lp:x:7:daemon,darkmind
mem:x:8:
kmem:x:9:
wheel:x:10:root,darkmind,pct
ftp:x:11:
mail:x:12:
uucp:x:14:
log:x:19:root
utmp:x:20:
locate:x:21:
rfkill:x:24:
smmsp:x:25:
http:x:33:
games:x:50:darkmind
lock:x:54:
uuidd:x:68:
dbus:x:81:
network:x:90:darkmind,pct
video:x:91:darkmind,pct
audio:x:92:darkmind,pct
optical:x:93:pct,darkmind
floppy:x:94:
storage:x:95:darkmind
scanner:x:96:pct,darkmind
power:x:98:
nobody:x:99:
users:x:100:pct
systemd-journal:x:190:
polkitd:x:102:
transmission:x:169:
avahi:x:84:
usbmux:x:140:darkmind
ntp:x:87:
mysql:x:89:
kdm:x:135:
git:x:999:
pct:x:1001:
(i'm darkmind)
somebody help?
Last edited by dunkles (2014-02-25 22:50:53)

ewaller wrote:I am not sure what that means. Are you expecting a pop up notification in KDE?
yes
ewaller wrote:Does Dolphin show the volumes?
not show the volumes, nothing happens when plug a usb drive
ewaller wrote:Do you have udisks installed? How about udisks2?
yes

Ethernet to USB is not detected

I have recently bought a Ethernet to USB converter. When I connect it to my laptop it does not get connected ,It is getting detected and it is shown in PC settings>Devices.When I troubleshoot it,It shows that the drivers are not properly installed.
How to install the proper drivers? Hoping for a early reply
prudhvi

Try get the drivers from the vendors webpage. Furthermore, look if the NIC is supported by your Operating System
Best Regards,
Jesper Vindum, Denmark
Systems Administrator
Help the forum: Monitor(alert) your threads and vote helpful replies or mark them as answer, if it helps solving your problem.

Headphones Not Detected

Hi,
I recently purchased this laptop and the headphones never were detected. I have updated my RealTek audio drivers. I have tried multiple headphones and they are working on other computers.
When I plug in the headphones, the headphones do not work and the sound still plays from the speakers. The headphones are not listed in Playback devices. Only the RealTek spaeakers are listed.
My BIOS is F.09 from 08/04/2014
Producct Name: HP Envy 15 Notebook
Product Number: G0T55AV
Drivers: Up to Date (RealTek Drivers)
Thank you for helping. I am thinking of returning this laptop I just purchased soon if I can't get this fixed.
Sincerely,
Ben

Hi @Butterback ,
Thank you for your query.
I grasps that when you connect your headphones the sound comes out of the speakers and not the headphones.
Please try the step in this document to overcome this difficulty. Troubleshooting Sound Problems with External Speakers and Headsets in Windows 7.
If the issue should remain please contact HP support for further assistance. As this is a new notebook you want to know everything is working correctly.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

USB Devices Not Detected and High CPU Usage

Hello, I'm using arch on a Dell 1720 laptop.
I have some weird issues involving detection of USB devices.
When the laptop is on battery and I plug in a USB mouse the power flickers on and flickers off again; nothing in the logs/dmesg.
If I then connect the AC adapter the reconnect the mouse, the same happens, except the CPU usage hits 87%+ on one core.
Running
sudo rmmod ehci_hcd
solves the problem; the CPU usage drops and the mouse gets detected.
Subsequent attempts to hotplug USB devices does nothing, no high CPU and no Power.
Rebooting the computer is the only way to use USB devices at the moment.
usb-autosuspend is disabled in laptop-mode.
uname -a:
Linux MatSalleh 2.6.39-ck #1 SMP PREEMPT Sun Jun 5 18:30:30 EDT 2011 x86_64 Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz GenuineIntel GNU/Linux
The same happens with the stock kernel too
My kernel line in grub:
kernel /vmlinuz26-ck root=/dev/sda3 elevator=bfq ro resume=/dev/sda2
Any ideas?
Thanks,
Chris.

lilsirecho wrote:Perhaps the USB connector is damaged, causing excess power drain suggesting that the current limiter isn't functioning.
I highly doubt it's that, it was working fine on ubuntu just days before...
tydell wrote:I had similar problem with USB pendrive, it wasn't detected and it makes high cpu usage. It was problem with ehci_hcd module
This one helps me to solve this problem
My USB devices don't even get detected, so that script won't work.
Last night I hibernated my computer after not using any USB devices, on resume, my CPU usage was 100%, removing the ehci_hcd module fixed it.
Any more ideas?
I'm tempted to build a vanilla kernel...

[SOLVED] Verbatim USB headphones not detected

Similar Messages

Maybe you are looking for