[SOLVED] version `HEIMDAL_KRB5_1.0' not found

Why is this happening now?
/opt/xbmc/share/xbmc/xbmc.bin: /usr/lib/libkrb5.so.25: version `HEIMDAL_KRB5_1.0' not found (required by /usr/lib/libsmbclient.so.0)
i did a
$ sudo pacman -Sy heimdal
it's up to date and installed, and i can't get rid of this message
Last edited by beatbreaker (2009-12-08 21:52:04)

Um, I have exact the same problem while starting some deamons (yestarday it was cups, but reinstalling heimdal solved it, today it's ssh), I have no packages ignored in pacman and I don't quite know what to do.
$ sudo /etc/rc.d/sshd start
:: Starting Secure Shell Daemon [BUSY]
/usr/sbin/sshd: /usr/lib/libkrb5.so.25: version `HEIMDAL_KRB5_1.0' not found (required by /usr/sbin/sshd)
[FAIL]
/EDIT: reinstalling openssh solved the problem, but still, I would like to know why pacman didn't upgrade ssh, as he should do this while pacman -Suy
Last edited by martusia (2009-12-14 19:56:10)

Similar Messages

[SOLVED] Upgrading after four month (version `GLIBC_2.16' not found)

Hi all!
After some time I decide to upgrade and starting with read the manual at the site.
Firstly, I run
pacman -Syu --ignore glibc,curl
this exit successfully
Secondly,
pacman -Su
but this give me error
pacman: /lib/libc.so.6: version `GLIBC_2.16' not found (required by /usr/lib/libarchive.so.12)
pacman always return this error, so I don't install glibc manually
help me, pls
i tried to untar glibc-2.16.0-4
tar -xvf glibc-2.16.0-4-i686.pkg.tar.xz -C /
it exit with
tar: lib: Cannot create symlink to `usr/lib': File exists
tar: lib64: Cannot create symlink to `usr/lib': File exists
tar: Exiting with failure status due to previous errors
ok, glibc untared(symlinks created with my hands in ramfs mode), but nothing happens (only kdm not start, but startx works) and error while i'm trying to use pacman is same
pacman: /lib/libc.so.6: version `GLIBC_2.16' not found (required by /usr/lib/libarchive.so.12)
Last edited by tim91 (2012-09-29 15:36:07)

jfnichols wrote:tim, can you explain more how you re-installed pacman? I am having this same issue
This is an old thread, but https://bbs.archlinux.org/viewtopic.php … 8#p1044458

[solved] libc.so.6 version GLIBC_2.16 not found

i have tried to upgrade arch today, and i am getting too deep,
im stilll getting error message
pacman: /lib/libc.so.6 version GLIBC_2.16 not found (required by /usr/lib/libcurl.so.4)
i followed the instructions here https://wiki.archlinux.org/index.php/De … iki:usrlib and am not getting anywhere. i am following the instructions here https://bbs.archlinux.org/viewtopic.php?pid=1144268 and im also not getting anywhere with this.
i did untar the package curl-7.26.0-1-x86_64.pkg.tar.xz from cache and tried to overwrite teh curl libs in /usr/lib and im still getting this error. previously i ignored the unresolvable dependencies which i now feel is a mistake, the list is quite long, heres an example
warning: ignoring package glibc-2.16.0-2
warning: cannot resolve "glibc>=2.16", a dependency of "gcc-libs"
:: The following packages cannot be upgraded due to unresolvable dependencies:
binutils gcc gcc-libs
Do you want to skip the above packages for this upgrade [y/N]
and the actual ones i ignored that i still have to upgrade because they have been ignored are as follows
pacman -Sd binutils dbus dbus-core gcc gcc-libs ghostscript glib2 glibmm gnutls grep gtk2 icu initscripts libcups libgl linux mesa mkinitcpio pcre php php-apache php-gd php-mcrypt php-pear phpmyadmin samba systemd-tools
im going to stop here until i get some assistance if possible before i break anything. i do have my original curl libs backed up to /tmp/pacman_build/usr directory
where to go from here?
Last edited by wolfdogg (2012-08-12 06:45:49)

okay so here's the output of the command:
error: cannot determine ownership of directory '/lib'
/lib/libnss_files-2.15.so is owned by glibc 2.15-12
/lib/libnss_db.so.2 is owned by glibc 2.15-12
/lib/libresolv.so.2 is owned by glibc 2.15-12
/lib/libutil.so.1 is owned by glibc 2.15-12
/lib/libc.so.6 is owned by glibc 2.15-12
/lib/libnss_nis-2.15.so is owned by glibc 2.15-12
/lib/libmemusage.so is owned by glibc 2.15-12
/lib/libBrokenLocale-2.15.so is owned by glibc 2.15-12
/lib/ld-linux.so.2 is owned by glibc 2.15-12
/lib/libnss_hesiod-2.15.so is owned by glibc 2.15-12
/lib/libSegFault.so is owned by glibc 2.15-12
/lib/libcrypt-2.15.so is owned by glibc 2.15-12
/lib/libnss_nisplus.so.2 is owned by glibc 2.15-12
/lib/libnsl-2.15.so is owned by glibc 2.15-12
/lib/libpthread-2.15.so is owned by glibc 2.15-12
/lib/libm-2.15.so is owned by glibc 2.15-12
/lib/libdl.so.2 is owned by glibc 2.15-12
/lib/ld-2.15.so is owned by glibc 2.15-12
/lib/libcidn-2.15.so is owned by glibc 2.15-12
/lib/libnss_files.so.2 is owned by glibc 2.15-12
/lib/libnss_nis.so.2 is owned by glibc 2.15-12
/lib/libresolv-2.15.so is owned by glibc 2.15-12
/lib/librt.so.1 is owned by glibc 2.15-12
/lib/libnss_compat-2.15.so is owned by glibc 2.15-12
/lib/libpcprofile.so is owned by glibc 2.15-12
/lib/libcidn.so.1 is owned by glibc 2.15-12
/lib/libnss_hesiod.so.2 is owned by glibc 2.15-12
/lib/libnss_db-2.15.so is owned by glibc 2.15-12
/lib/libdl-2.15.so is owned by glibc 2.15-12
/lib/libthread_db.so.1 is owned by glibc 2.15-12
/lib/libpthread.so.0 is owned by glibc 2.15-12
/lib/libnss_nisplus-2.15.so is owned by glibc 2.15-12
/lib/libm.so.6 is owned by glibc 2.15-12
/lib/libthread_db-1.0.so is owned by glibc 2.15-12
/lib/libnss_dns-2.15.so is owned by glibc 2.15-12
/lib/librt-2.15.so is owned by glibc 2.15-12
/lib/libutil-2.15.so is owned by glibc 2.15-12
/lib/libBrokenLocale.so.1 is owned by glibc 2.15-12
/lib/libc-2.15.so is owned by glibc 2.15-12
/lib/libcrypt.so.1 is owned by glibc 2.15-12
/lib/libanl.so.1 is owned by glibc 2.15-12
error: cannot determine ownership of directory '/lib/modules'
error: cannot determine ownership of directory '/lib/modules/3.1.9-2-ARCH'
error: No package owns /lib/modules/3.1.9-2-ARCH/modules.ccwmap
error: No package owns /lib/modules/3.1.9-2-ARCH/modules.ofmap
error: No package owns /lib/modules/3.1.9-2-ARCH/modules.ieee1394map
error: No package owns /lib/modules/3.1.9-2-ARCH/modules.pcimap
error: No package owns /lib/modules/3.1.9-2-ARCH/modules.inputmap
error: No package owns /lib/modules/3.1.9-2-ARCH/modules.usbmap
error: No package owns /lib/modules/3.1.9-2-ARCH/modules.seriomap
error: No package owns /lib/modules/3.1.9-2-ARCH/modules.isapnpmap
error: cannot determine ownership of directory '/lib/modules/extramodules-3.2-ARCH'
error: cannot determine ownership of directory '/lib/modules/extramodules-3.2-ARCH/kernel'
error: cannot determine ownership of directory '/lib/modules/extramodules-3.2-ARCH/kernel/oss'
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_hdaudio.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_via97.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_cmpci.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_ali5455.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_envy24.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_imux.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_audiopci.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_midimix.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_ich.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_madi.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_solo.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_digi96.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_emu10k1x.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_midiloop.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/osscore.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_cs4281.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_envy24ht.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_cs461x.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_audioloop.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_via823x.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_trident.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_sbpci.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_geode.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_cmi878x.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_atiaudio.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_fmedia.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_sbxfi.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_ymf7xx.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_usb.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_audigyls.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_sblive.ko
error: No package owns /lib/modules/extramodules-3.2-ARCH/kernel/oss/oss_userdev.ko
/lib/libanl-2.15.so is owned by glibc 2.15-12
/lib/libnss_compat.so.2 is owned by glibc 2.15-12
/lib/libnsl.so.1 is owned by glibc 2.15-12
/lib/libnss_dns.so.2 is owned by glibc 2.15-12
if you say "have a look in /lib yourself if there are any leftover files or directories" then what files exactly do you mean? those who are still owned by glibc? and how do I move them properly (or is this already described in the wiki)?

Libc.so.6: version `GLIBC_2.16' not found

Hey everyone,
I haven't used my Arch system for some months now, thus I had to go through the updating marathon with all these issues.
I've read threads on the forums, guides and asked google for help. I think that I'm close to the finish line. But now I get this error message when using pacman:
pacman: /lib/libc.so.6: version `GLIBC_2.16' not found (required by /lib/libarchive.so.12)
I probably messed something up.
In this thread someone had a similar problem and was able to solve it, but he had to struggle with "libcurl.so.4" instead of "libarchive.so.12". So his "workaround" for the curl package is to no avail for me. How can I find out what package is affected by "libarchive.so.12"? And can I use a similar workaround?
Any help is greatly appreciated!
best regards
Webmaniac

I've installed Arch on a Raid0. When I try to enable the raid ("dmraid -ay") with the live cd, I get:
[...]stripe:Couldn't parse stripe destination
RAID set "isw_..._Volume0" was not detected
ERROR: device "isw_..._Volume0" could not be found'
Can't fix it.
Is there any way that I can use pacstrap from an existing Ubuntu install? I could enable my raid with Ubuntu and then use pacstrap to fix my arch install, couldn't I?

ERROR: [Hsi 55-1594] Core lwip141 of version 2.2 not found in repositories (can't modify BSP)

While trying to modify the BSP setting for the socket_apps_bsp (socket_apps reference design from: XAPP1026) I got the following error (after clicking the "Modify this BSP's Settings" button):
The following errors were found parsing C:\Kintex-7\ref_design_32K\socket_apps_bsp\system.mss
ERROR: [Hsi 55-1594] Core lwip141 of version 2.2 not found in repositories
Not sure what this is supposed to mean or what the fix is. I'm running the 2014.3 SDK and I'm using the reference design from last week (dated 10-24-2014, I believe). I can run the webserver in that reference design on the microblaze ok, I see the webpage displyed, however, I do not see the LEDs toggle when pushing the LED Toggle button. I traced this to this section of code in the platform_gpios.c file:
#include "xparameters.h"
#if defined(XPAR_LEDS_8BITS_BASEADDR)
#define LED_BASE XPAR_LEDS_8BITS_BASEADDR
#elif defined(XPAR_LEDS_4BITS_BASEADDR)
#define LED_BASE XPAR_LEDS_4BITS_BASEADDR
#elif defined(XPAR_LEDS_6BIT_BASEADDR)
#define LED_BASE XPAR_LEDS_6BIT_BASEADDR
#else
#define NO_GPIOS
#endif
The #define NO_GPIOS gets defined there because none of the definitions that are checked from teh xparameters.h file are defined and so no LEDs actually get toggled. So I figured I would need to somehow change this in the BSP, hence I ran into the problem above. If there is another way to set either XPAR_LEDS_8BITS_BASEADDR, XPAR_LEDS_4BITS_BASEADDR, XPAR_LEDS_6BIT_BASEADDR I'd be interested in finding that out as well. (I'm using the KC-705 board, which of those should be defined?)

I have exactly the same problem and ther is no reply here.. could you solve this issue?? thank you so much!

Version `GLIBC_2.12' not found

Hi,
I recently installed arch for the 1st time with Apache, PHP and MySQL.
When I try to install postfix, already in the 1st phase, I get an error. Any help would be greatly appreciated!
Below is what I get. Apparently GLIBC_2.12 is not installed. How do I resolve this issue?
Thank you,
TC
# pacman -Sy postfix
:: Synchronizing package databases...
core 35.4K 300.4K/s 00:00:00 [######################] 100%
extra 454.6K 1272.4K/s 00:00:00 [######################] 100%
community 384.9K 1225.5K/s 00:00:00 [######################] 100%
warning: postfix-2.7.1-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): postfix-2.7.1-1
Total Download Size: 0.00 MB
Total Installed Size: 8.58 MB
Proceed with installation? [Y/n] y
checking package integrity...
(1/1) checking for file conflicts [##############################] 100%
(1/1) upgrading postfix [##############################] 100%
usermod: no changes
newaliases: /lib/libc.so.6: version `GLIBC_2.12' not found (required by /usr/lib/libldap-2.4.so .2)
error: command failed to execute correctly

tc wrote:Stuff
It's generally a bad idea to -Sy foobar
Last edited by Mr.Elendig (2010-08-29 11:44:47)

Libgcc_s.so.1: version `GCC_3.4' not found

I am using Solaris 8, Adobe Reader 7.0.9 and CDE.
# ./acroread
ld.so.1: acroread: fatal: libgcc_s.so.1: version `GCC_3.4' not found (required by file /usr/local/lib/libcairo.so.2)
ld.so.1: acroread: fatal: libgcc_s.so.1: open failed: No such file or directory
Killed
I have libgcc 3.4.6 installed (I have tried several versions of
libgcc).
I noticed that the Adobe Reader comes with its own version of
libgcc. I have tried both the libgcc from the package, and the
one contained in the Adobe tree: /usr/local/Adobe/Acrobat7.0/
Reader/sparcsolaris/lib/libgcc_s.so.1
I have set LD_LIBRARY_PATH to /usr/local/lib:/usr/local/Adobe/Acrobat7.0/
Reader/sparcsolaris/lib:/lib
Thanks
stephen

Thanks, Priyank,
Your advice fixed the problem.
Adobe Reader is now starting up without the libgcc error.
**However,
I now get another error message when I start /usr/local/Adobe/Acrobat7.0/acroread:
"There was an error while loading the plug-in SOAP.api.
The Plug-in failed to load"
The application then exits without any more
messages. I tried removing the SOAP.api, but then
acroread displays the banner, then exits with no error messages.
Thanks,
stephen

Libefi.so.1: version `SUNWprivate_1.1' not found error

Hello All,
I am trying ot hook up some USB storage devices to a Sol 10 box. The USB is recognized and I want now to format and partition it.
I am attempting to use rmformat to do this, but get the following error immediately after typing the command.
ld.so.1: rmformat: fatal: libefi.so.1: version `SUNWprivate_1.1' not found (required by file /usr/bin/rmformat)
ld.so.1: rmformat: fatal: libefi.so.1: open failed: No such file or directory
The box has the minimal OS install package with the latest Recommended Patch Cluster applied.
Any help is much appreciated!
Message was edited by:
s_c_o_t_t

This happens when your library path is not correctly set.
your libefi.so.1 is surely located at /usf/sfw/lib (try to search it)
Run the command : crle
And set the news paths :
crle -l /usr/lib:/lib:/usr/sfw/lib

[SOLVED] pacman error: database not found (during an install)

i am trying to install an app
when installing
# pacman -S /path/to/dir/app.tar.gz
error: database not found
when i look inside the tar, theres only one file, app.bin
im sure its some fundamental that im missing. so i have to makepkg first , or am i missing a command during the intallation, or is the file broken?
Last edited by wolfdogg (2011-06-04 05:50:09)

well, im geting some errors with the program, im wondering if i need to make a package? i think i will try that next.
heres the beginning of the log, Java errors mainly
eclipse.buildId=unknown
java.version=1.5.0_11
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=linux, ARCH=x86, WS=gtk, NL=en_US
Command-line arguments: -os linux -ws gtk -arch x86
!ENTRY org.eclipse.equinox.ds
!MESSAGE
!STACK 0
org.osgi.framework.BundleException: The bundle could not be resolved. Reason: Missing Constraint: Import-Package: org.eclipse.equinox.internal.util.event; version="1.0.0"
at org.eclipse.osgi.framework.internal.core.AbstractBundle.getResolverError(AbstractBundle.java:1313)
at org.eclipse.osgi.framework.internal.core.AbstractBundle.getResolutionFailureException(AbstractBundle.java:1297)
at org.eclipse.osgi.framework.internal.core.BundleHost.startWorker(BundleHost.java:309)
at org.eclipse.osgi.framework.internal.core.AbstractBundle.resume(AbstractBundle.java:370)
at org.eclipse.osgi.framework.internal.core.Framework.resumeBundle(Framework.java:1068)
at org.eclipse.osgi.framework.internal.core.StartLevelManager.resumeBundles(StartLevelManager.java:557)
at org.eclipse.osgi.framework.internal.core.StartLevelManager.incFWSL(StartLevelManager.java:464)
at org.eclipse.osgi.framework.internal.core.StartLevelManager.doSetStartLevel(StartLevelManager.java:248)
at org.eclipse.osgi.framework.internal.core.StartLevelManager.dispatchEvent(StartLevelManager.java:445)
at org.eclipse.osgi.framework.eventmgr.EventManager.dispatchEvent(EventManager.java:227)
at org.eclipse.osgi.framework.eventmgr.EventManager$EventThread.run(EventManager.java:337)
ok, i downloaded a different binary of this program, and it installed successfully. thanks for the help
Last edited by wolfdogg (2011-06-04 05:49:37)

[SOLVED] sudo and "command not found" problems

Ok, the problem I've got is this: sudo has suddenly started acting real strange. It can't find any programs. For example, if i type
sudo echo
It just goes
sudo: echo: command not found
And another problem I've got, is that as a regular user, it can't find programs in /sbin, or other "exotic" places. For example it can't find firefox, because it's not in /usr/bin or /bin, but in /opt/mozilla/bin.
Please, help me!
Last edited by mrpedroxx (2008-06-14 13:23:49)

sudo -V outputs this
Sudo version 1.6.9p15
$PATH outputs
bash: /usr/gnu/bin:/usr/local/bin:/bin:/usr/bin:.: No such file or directory
pacman -Q firefox outputs
firefox 2.0.0.7-1
Yeah, maybe I should update it anyway
And /var/log/errors.log does contain stuff about hard disks, but it's just me mounting my iPod and the Windows partition on my hd

[SOLVED] Fatal: module phc_intel not found

I've used the phc_intel package from AUR, yet it didn't work for me and I removed it. Now, during boot I get the "Fatal: module phc_intel not found" message. It doesn't stop the boot but it's annoying. There is no mention of it in rc.conf:
MOD_AUTOLOAD="no"
#MOD_BLACKLIST=() #deprecated
MODULES=(!usblp acpi_cpufreq cpufreq_ondemand iwl4965 ac battery button processor thermal video btusb cdrom agpgart intel-agp nvram i2c-i801 i2c-core evdev joydev pcspkr psmouse serio_raw led-class mmc_core ricoh_mmc sdhci-pci sdhci pci_hotplug shpchp thinkpad_acpi wmi rtc-cmos rtc-core rtc-lib nvidia output iTCO_vendor_support iTCO_wdt snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-codec snd-hda-intel soundcore scsi_mod ahci ata_piix e1000e bluetooth mac80211 rfkill iwlagn iwlcore cfg80211 pcmcia_core rsrc_nonstatic yenta_socket usb-storage usbcore ehci-hcd uhci-hcd ieee1394 ohci1394 sd_mod sr_mod st)
Any ideas?
Last edited by dcc24 (2009-12-19 19:59:45)

Yes, there was a conf file there. Removing it solved the problem. Thanks!

Can't solve "valid signing identity not found" issue

Hello,
I'm having a lot of trouble getting an app to build properly. I'm using the Corona SDK, but I believe that my true problem lies here:
It says, "Valid signing identity not found."
I've gone through the process of uninstalling all of my Provisioning Profiles and reinstalling them numerous times but still haven't solved this issue. Any advice would be greatly appreciated.
Cheers,
- Bret

Hi etresoft,
Thanks so much for taking the time to reply to my question. I am under the assumption that my build issue has something to do with the "Valid signing identity not found." message that appears in the XCode Provisioning Profiles window. In all probability, this is causing my build issue, and it seems like a Provisioning / Keychain issue and not necessarily a Corona SDK issue. I did contact Corona anyhow and I'm waiting for a reply.
If there's any chance you can help me debug the "Valid signing identity not found", I would be very grateful!
Cheers,
- Bret

[SOLVED] rc.d: command not found

I am in the process of installing xfce. One of the steps is to run:
rc.d start dbus
However, when I run this it returns:
bash: rc.d: command not found
Am I missing something?
Last edited by george55 (2011-08-11 04:03:16)

Inxsible wrote:
rc.d is not a command. its a location under /etc. your command should be
sudo /etc/rc.d/dbus start
$ which rc.d
/sbin/rc.d
$pacman -Qo /sbin/rc.d
/sbin/rc.d is owned by initscripts 2011.07.3-1
$ rc.d --help
usage: rc.d <action> <daemon> [daemon] ...
rc.d list [started|stopped]
rc.d help
<daemon> is the name of a script in /etc/rc.d
<action> can be a start, stop, restart, reload, status, ...
WARNING: initscripts are free to implement or not the above actions.
e.g: rc.d list
rc.d list started
rc.d help
rc.d start sshd gpm
Initscripts update, part 1
Initscripts update, part 2
@george55
If rc.d command doesn't work, check your initscripts version, and check your $PATH.

[SOLVED] network-manager-applet not found

Hi, I'm quite noob here, and I'm trying to install network-manager-applet with no luck;
So far I've done
# pacman -S network-manager-applet
and I got
resolving dependencies...
looking for inter-conflicts...
Targets (1): network-manager-applet-0.8-1
Total Download Size: 1.01 MB
Total Installed Size: 4.35 MB
Proceed with installation? [Y/n] y
:: Retrieving packages from extra...
error: failed retrieving file 'network-manager-applet-0.8-1-x86_64.pkg.tar.gz' from mi.mirror.garr.it : Not Found
error: failed retrieving file 'network-manager-applet-0.8-1-x86_64.pkg.tar.gz' from ftp.nluug.nl : Not Found
error: failed retrieving file 'network-manager-applet-0.8-1-x86_64.pkg.tar.gz' from ftp.hosteurope.de : Not Found
error: failed retrieving file 'network-manager-applet-0.8-1-x86_64.pkg.tar.gz' from ftp-stud.hs-esslingen.de : Not Found
error: failed retrieving file 'network-manager-applet-0.8-1-x86_64.pkg.tar.gz' from archlinux.puzzle.ch : Not Found
error: failed retrieving file 'network-manager-applet-0.8-1-x86_64.pkg.tar.gz' from ftp.surfnet.nl : Not Found
warning: failed to retrieve some files from extra
error: failed to commit transaction (Not Found)
Errors occurred, no packages were upgraded.
so I tried to download the package itself and install it with
pacman -U network-manager-applet-0.8-2-x86_64.pkg.tar.xz
and the answer was
loading package data...
checking dependencies...
error: failed to prepare transaction (could not satisfy dependencies)
:: network-manager-applet: requires mobile-broadband-provider-info
what to do?
i cannot find in the repos the package mobile-broadband-provider-info
thank you in advance
Last edited by lsk (2010-03-10 10:15:21)

Update your system - "pacman -Syu". The clue is that the file you manually downloaded is different to the one pacman is trying to get.

[Solved] yaourt and liblbxutil: not found on AUR?

When running yaourt I am receiving the following notice: liblbxutil: not found on AUR
Previous runs of yaourt did not produce this message. Where did the package go and how to fix?
Last edited by BKJ (2008-11-12 00:45:46)

I found it in the ABS tree even though it doesn't seem to exist in any of the repos anymore. You may want to file a bug report. I don't know if it's being used by anything. It's listed as installed as a dependency but not required by anything.
# $Id: PKGBUILD 356 2008-04-18 22:56:27Z aaron $
#Maintainer: Jan de Groot <[email protected]>
pkgname=liblbxutil
pkgver=1.0.1
pkgrel=1
pkgdesc="Low Bandwidth X11 Utility Library"
arch=(i686 x86_64)
url="http://xorg.freedesktop.org/"
depends=('zlib')
makedepends=('pkgconfig')
options=(NOLIBTOOL)
source=(${url}/releases/individual/lib/${pkgname}-${pkgver}.tar.bz2)
md5sums=(b73cbd5bc3cd268722a624a5f1318fde)
build() {
cd ${startdir}/src/${pkgname}-$pkgver
./configure --prefix=/usr \
--build=${CHOST} --host=${CHOST}
make || return 1
make DESTDIR=${startdir}/pkg install || return 1
Last edited by skottish (2008-11-09 18:36:54)

[SOLVED] version `HEIMDAL_KRB5_1.0' not found

Similar Messages

Maybe you are looking for