[Solved] vfat and iso9660 support?

I'm not sure whether this is a newbie question, or not! Earlier this year I moved from Ubuntu to Arch.
I find that I am unable to mount vfat and iso9660 volumes
Error mounting /dev/sr1 at /run/media/root/SELPHYCP910: Command-line `mount -t "iso9660" -o "uhelper=udisks2,nodev,nosuid,uid=0,gid=0,iocharset=utf8,mode=0400,dmode=0500" "/dev/sr1" "/run/media/root/SELPHYCP910"' exited with non-zero exit status 32: mount: unknown filesystem type 'iso9660'
(udisks-error-quark, 0)
Now, I might not have mounted a CD since I installed Arch, but I'm pretty certain that I have used SD cards. What has happened to my system? Have I omitted to install something critical?
Should there be mount.iso9660 and mount.vfat files in usr/bin?
Last edited by PeterBell (2014-09-20 08:51:49)

rebootl wrote:A reboot is needed, when a kernel update occured. It's the only reason to ever reboot actually .
Okay, thanks - I have to watch pacman, then, to see whether a kernel update is applied. Oh, and my machine gets rebooted, on average, a couple of times a day - the frequency with which we experience power cuts.
Edit: (Please mark as solved then.)
Done.

Similar Messages

[SOLVED] Virtualbox and USB Support

I use Virtualbox quite regularly for work and school. I have Windows installed within Virtualbox, and I use it whenever school or work requires. However, USB support has never worked for me (even with the fstab addition) and I thought maybe I'll spend some time to figure this out.
Basically, I may want to do things like insert a flash drive and make it available to the VM, or even sometimes an MP3 player or even my PSP. Unfortunately, it doesn't seem to work. There USB filters, but often times the device I want is greyed out, and can't be selected. When I am able to select a device to create a filter, it doesn't do anything. I did check the Wiki already.
Maybe I'm missing something? Or is USB support in Virtualbox just that bad? I was hoping there would be some sort of way I can dedicate a USB port to Virtualbox, and make it exclusive. I think VMWare can do that but I'm not sure that Virtualbox can.
Last edited by jlacroix (2010-10-19 02:41:44)

I hope it's ok to post in this thread because if I started a new thread the title would be identical. I am also using virtualbox_bin from AUR and while USB passthrough works just fine to my Windows XP guest, it can't be working any faster than USB v1.1 speed. I have the appropriate entry in /etc/fstab and am a member of the virtualbox group. No permissions problems and from what I can tell there's no corruption of data to/from any of my USB flash drives. The only issue I've had other than the aforementioned lack of speed is with a 1TB Western Digital Passport. It seemed to have "lost" some directories. In other words they appeared completely empty on the XP side. After shutting down the guest I verified that all of the files were indeed still there and intact. I've basically chalked that one up to a deficiency in Windows XP. But this speed issue is seriously holding me back.

IPAD MINI RETINA SCREEN VERSION IOS 7.1.2 can't success download apps , need to reboot every times only can download apps. Is iOS problem or hardware issue.? Local agent switch sale and tech support can't fix my problem.

I Purchase iPad mini retina screen on July 7 2014 at Malaysia local apple sale agent switch store somehow now my iPad did restore to latest iOS 7.1.2, before that and after also facing 1new issue is my iPad mini cant success download apps and error message show can't download at this time, either retry or click done. My internet is good condition no line down, I reboot my iPad only can download but sometime can't need to reboot twice only can download. Very sad local sale and tech support can't help to solve my problem...

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, tap Settings > General > Reset > Reset Network Settings
You will have to re enter your Wi-Fi password.
No data is lost due to a reset.
If nothing above helped, try here > iOS: Troubleshooting Wi-Fi networks and connections

You have to love HP products and their customer service and technical support

My daughter has one of your ZV5000 notebooks. She has been very happy with it until the last few months when she started having charging issues. After investigation I found out that HP had a class action suit over this very problem. I called customer support and I emailed customer support trying to get HP to live up to it's obligation and fix it. I got no where and after several hours I gave up. She decided to get a new notebook. She bought a Compact Presario CQ50-130US from Staples. When she got it home she tried to connect to my wireless router and couldn't. We called technical support and spend the following 2 hours trying to get it to connect. I spoke to several techs none of which knew what they were talking about. They would read step by step from some try this if that doesn't work try this directions they must have. If that wasn't bad enough we constantly had to ask for it to be repeated because we couldn't understand them. They spoke English but with such heavy accents you couldn't understand what they were saying. The last tech was going to call Comcast my internet provider. I told him they provided the internet service not the router. He couldn't understand that. After keeping me on the phone for 15 minutes he came back to say he couldn't get threw and would call me back when he did. There customer service must be as good as yours is to get threw to. I got a call 24hrs later to ask if everything was alright. They never fixed the problem how could it be alright? By then she had decided to return the new one and buy a product other than HP or Compact. I would up fixing her old laptop something HP should have paid for but didn't. I have always trusted and respected the HP name. I am very sorry to see what it has become to stand for. Inferior products that you don't stand behind and customer and technical support that can't speak English and don't have a clue as to what they are doing. How sad! Do you think any of my family or friends will be buying an HP product?

well, this IS a means of finding a resolution for some issues. so why SHOULDNT they read this forum? i can assure you that there are people who are not just reading stuff off a book or a document. in fact, that is the biggest cliche's that exists today.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Plug-in encryption and watermarking support

On page 23 of the After_Effects_SDK_Guide.pdf it says...
"As of CS4, there is no encryption and watermarking support to protect code and provide trial versions of filters. "
I didn't know there was such support. Where is it explained?
Thanks,
MIke

i'm not a native english speaker, but i think that the wording "as of" can be used in a few ways:
"as of sunday, ice cubes will no longer be available" meaning that after saturday there will be no more ice.
another way would be:
"as of sunday, no ice cubes were available" meaning that last time we checked (sunday), ice was still unavailable.
an my favorite, the ambiguous way:
"as of sunday, there are no ice cubes" meaning... either way.
back to our case
pixel bender effects are text documents with humanly readble code.
anyone who has such an effect can open it's file in "note pad" and see the code exactly as you have written it.
as of the release of CS4 adobe hasn't supplied a solution to that problem for developers.
i don't develop pixel bender, so i'm not familiar with the latest news on that issue.
i do know that they (adobe) consider solving this a high priority.
"normal" plug-ins on the other hand are complied to machine code.
that means that no one can access the original code. (not in any effective way at least).
the difference on the watermarking issue is the same.
pixel bender effects are actually can only access their own parameters and pixel data handed to them (and very few other things).
the pixel bender API currently doesn't provide the developer the means to tell whether or not watermarking is needed.
normal plug-ins are actually DLLs, so besides having a much more expanded AE API, they can also do whatever the osAPI has to offer. (read and create files, read the system clock... ect...)
actually, anything you can do with c++, you can be implemented with a normal plug-in.
using these next-to-limitless tools, the developer can easilydecide whether or not to display the watermark,
and they do not rely on the AE API alone
summing up.
pixel bender is an AWSOME way to develop. the only drawback is that currently, commercial developers don't have any means to prevent their effects from being used unlicened, or having their original code simply taken from the effect file.
take that into consideration when deciding using which API to develop.

Hide links "Register Now..." and "Get support" in logon portal

Hi to all.
In portal logon (PROD) appears the links "Register Now..." and "Get support" and I want hide the links.
The properties ume.logon.logon_help and ume.logon.selfreg are FALSE in config tool and in Visual administrator.
The .com.sap.portal.runtime.logon.par is standar, it hasn't modified.
In DEV the problem doesn't appear but in PROD the problem appears since last week.
Can anybody helps me to solve my problem?
Thanks a lot !

Hi Shanti,
I have tested it and i have seen that there aren't roles assigned to the "Anonymous Users" group.
Thanks a lot.
Could you help me more?

HT5409 I asked if AVCHD files can be played on Mac and the support site says to simply click on the icon and quick time will play it. A big lie. Just say it won't support the file type and tell us what apps to get.

I asked if AVCHD files can be played on Mac and the support site says to simply click on the icon and quick time will play it. A big lie. Just say it won't support the file type and tell us what apps to get. anybody?

I also had issues opening AVCHD files on case-sensitive filesystems.
You can try these steps to solve the issue:
Right click on the AVCHD file and select 'Show Package Contents'
Right click on the BDMV file and select 'Show Package Contents'
Rename index.bdm to INDEX.BDM (it seems that all files in the BDMV folder should be in UPPERCASE for Quicktime to open the AVCHD file).
Go back twice and try again to double-click on the AVCHD file (Quicktime should open a window showing the multiple clips, as expected).

Language and Input Support missing from BB Software

In my Blackberry Desktop Software, in Applications, there used to be an area for -Core Applications and -Language and Input Support. They are both missing now This is on both version 6 and Version 5. Can anyone please help me out Thanks

Hi Bennyl,
Welcome to BlackBerry Support Community Forums.
Can you please clarify what you are seeing now in Applications in the Desktop Software?
Do you see only applications that are already installed on your device? Is the BlackBerry Device Software installed on your PC?
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Does Weblogic Portal Server provides caching services and multilingual support

I wanted to know whether Weblogic Portal Server 8.1 has got the facility for caching
services and multilingual support?

is this JSF-portlet.jar bridge file used to create .portlet file from the JSF file so that the portlet file may be added in the portal?
And if you were able to solve the issue by removing the bridge jar file itself, how does that help? if that is the one that would help in creating portlets.
If anyone have been able to create a .portlet file from JSF and deploy in Weblogic 8.1, let me know.
Thanks,
-RAJIV.

Flex and multilanguage support for webUI

I am looking into Flex as the next-gen development system for
our web apps. I do not know very much about Flex at this time, but
I need to find out how Flex handles multilanguage capability.
Currently, we make heavy use of JS and DHTML for our UI
design, and to support different languages we separate out all our
strings into individual files (utf8) that are translated. The
client-side JS will make a call to the server to determine the
user's language preference and load the appropriate string file
when rendering the UI.
I need to know if something like this is possible in the Flex
environment, or how Flex handles multilanguage string separation.
Thanks

Hi Lalo,
well, I am still not sure what your problem is - but....
The selection of the Code Group for example happens in:
BAPI_CODEGROUP_CODE_GETLIST
Well, this method is called in ALM_ME_CODEGRP_GETDETAIL and there you find the line
langu = sy-langu
so this defines the language.
Perhaps this helps you to solve your issue and understand the process a little? So you are right - it is the GETDETAIL handler as such - but the language in there is defined by sy-language as you see. Change the language and all should be fine.
Regards,
Oliver
Edited by: Oliver Kaluscha on Jan 30, 2008 2:19 PM
oh - just to mention - MAM017 and so on are running under the RFC user in the backend - so the language of the current user on the PDA will not really help here I think.
Regards,
Oliver

HI PLZ HELP I WANT TO UPGRADE TO SSD I ODNT KNOW WHETHER MY BOARD AND CPU SUPPORTS

HI PLZ HELP I WANT TO UPGRADE TO SSD I ODNT KNOW WHETHER MY BOARD AND CPU SUPPORTS
COMP
Compaq Presario CQ42-372TU Notebook
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?javax.portlet.begCac=...
PLZ ANY BODY HELP MEEEEEEEE
This question was solved.
View Solution.

You can upgrade to an SSD.
The simplest method is to use an SSD like the Corsair Force 3 and be sure that you purchase the migration kit.
The migration kit comes with cloning software and a usb to SATA/power cable that connects to the new SSD.
It is recommended that you purchase and SSD that is about 256 GB in capacity if you can find one that is affordable.
SSD with migration kit options in a search that I did.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

My iphone screen has gone white with a few grey lines down the right hand side.. Has anyone any ideas how I can solve this and get my screen back to normal..? Thanks

my iphone screen has gone white with a few grey lines down the right hand side.. Has anyone any idea how I can solve this and get my screen back to normal..? Thanks

Hi tag71,
If you are having issues with the display on your iPhone, you may find the Display portion of the following article helpful:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Regards,
- Brenden

Overview of implementaion and production support projects

Hi Experts,
I am new to BW .I am aware of concepts but like to know what actually happens in implementing a project and in production. Pls provide me any documents which could be a great help to me
Regards,
swapna

Hi
Implementation involves creating af an object from generic ds (or wat ever has to be made in r\3 portion) creating BW objects from infosource till reporting and it also includes documentation and transporting the objects from dev to testing system and where ever there are UAT issues it is the resposibility of a developer to take over the charge solve it and again transport it
Support: it basically includes the issues when the object has been moved to production system.Clients helpdesk raises a ticket or a case and has to be solved by the member of the support team even though he is not the developer of the object and later have an interaction with the client on the same to take the input if required.
hope it helps assign points if applicable
thanks
puneet

I am having difficulty: we are running a windows server 2003 - mail and outlook support 2007 and upwards, how do I get the brand new apple machines to work with the 2003 version of server

I am having difficulty: we are running a windows server 2003 - mail and outlook support 2007 and upwards, how do I get the brand new apple machines to work with the 2003 version of server

I may be way out, but do you know about this product, would it help integrate the Macs for you.
https://www.thursby.com/sites/default/files/images/ADmitMacv8_SPD.pdf

IMAC's Top graphics card frustration - Cheap and no support for Adobe Mercury Playpack Engine GPU Acceleration?

If anyone has a solution for getting the Mecury Playpack Engine GPU acceleration to work with Premiere Pro CS6 on an iMAC 2011, please let me know. Like I wonder if you could Thunderbolt an External graphics card somehow? Or is an upgrade possible? Ahh...not worth the risk.
Please, if you have a solution for me, let me know. Otherwise I find it pretty frustrating that I purchased a top-end iMAC, fully maxed-out in every way possible, and that the iMac doesn't support Adobe Premiere's Mercury Playback Engine GPU acceleration. Also, an old USB 2.0 Hub and thus the built-in SD card reader is slow. If you have SD cards with 95MB/s Transfer, Read and Write speeds, the iMAC will only transfer at around 30MB/s if you're lucky. Technically 480Mbs which is around 50MB/s but I haven't seen those speeds.
I figured this could at least be circumvented with a Thunderbolt SD card reader or a Thunderbolt to USB 3.0 adapter but of course no such thing exists.
Well, nothing with a reasonable price tag. This all might seem trivial to some but when you're uploading 24 hours of HD video footage from a 128GB SDXC card, the speed makes a big difference.
And come on, no BluRay support? Ridiculous. I get the politics of why but still, just ridiculous. It would be nice to be able to burn a BluRay to watch in my home theater system. There are other methods but BluRay is convenient and great for backing up large Video Files. Unfortunately BluRay looks like it's not going to make it. Maybe cable distribution companies will increase their Internet upload speeds one day and I can just store everything in the cloud and watch full length movies(that I've created) on Vimeo.
Anyways, I went and took a look at the hardware Apple stuffed inside my fancy (3.4 Ghz i7, 16GB 1333 DDR3, 2GB AMD 6970M, 256 GB SSD Internal and 2TB 7200 Internal) machine and it appears to be pretty middle of the range stuff. It's an iMAC, not a Mac Pro so why am I griping? Because my 2009 PC(which I tricked out over the last two years) is faster and does support the Mercury Playback Engine. I spent $2100 total on this PC which includes all my upgrades. I spent around $3300 on the iMAC. I feel ripped off.
Yes, I do love my iMAC on multiple levels but had I known my dated 2009 PC would render video projects faster, I would have gone with a MAC Pro or just a new PC. It seems that Mac is moving completely away from making high-end computers for niche markets(video editing) and focusing on their tiny laptops, IPADS and IPhones for the masses. Obviously smart from a capitalistic perspective(at present at least) but very frustrating for some.
I was actually told to purchase a MAC for video editing. I've been a PC guy for 15 years. I went with the iMAC because I had read many good things about it(probably just Apple propaganda) and also the MAC PRO was to be discontinued. Also the MAC Pro would have been triple the cost for what didn't seem like a whole lot more.
It's one's thing to prepackage a computer with inferior hardware(the iMAC I have is fast for most things and more than enough for 99% of the population) but to not allow us to pop open the computer and make a quit upgrade to the machine is what really makes me feel like I'm using a computer built for Grannies. I mean there is a reason my mother loves iMacs and Iphones. Amazing that I was able to upgrade my memory from 4 to 16GB but I've heard Apple has even done away with that. I get why they do it. Apple Warranty, Apple Care issues, Profit and World Domination: Apple wants a monopoly on everything.
Was great to see Adobe bounce back after the whole Flash/HTML5 thing and knock Final Cut Pro off the face of the Earth for good. People are still buying it b/c of the brand name but Final Cut is done. David Fincher used Adobe's Workflow for everything when he made The Girl with The Dragon Tattoo. Hollywood is making the shift and the world will follow. The Adobe Workflow has finally come together and there is just no way Apple can compete with Adobe Creative Cloud and an Engine that can just swap from Premiere to After Effects to Prelude to SpeedGrade to Photoshop to Story with speed for $29 bucks a month(or $49 for some). Apple better start supporting Adobe's Mercury Engine or they may have a problem. And if you're using Final Cut X, you're severely handicapping yourself. Problem is that people don't want to take the time to learn Adobe's products(steep learning curve for sure) which is where Apple's Granny software, and perhaps computers, comes in to play. Arnold Schwarzenegger once said "Milk is for babies, Real Men Drink Beer". I'm beginning to think that "Mac's are for Grannies, Real Men Use Adobe and PCs".
The major problem with Apple is you're forced to use Apple. Not sure but history has proven that people don't like to be forced into anything. Autocracies don't work. These systems eventually topple, even in the corporate world.
Amazon.com, now that's the company to emulate. What an amazing machine!
I've read that Apple may even discontinue the iMAC after 2013. Who knows?
If anyone has a solution for getting the Mecury Playpack Engine GPU acceleration to work with Premiere Pro CS6 on an iMAC 2011, please let me know. Like I wonder if you could Thunderbolt an External graphics card somehow? Or is an upgrade possible? Ahh...not worth the risk.
1) Graphcis Card - AMD Radeon HD 6970M 2048 MB (6990 would have been better or something from NVIDIA.
2) USB 2.0 Hub with only 480 Mb/sec
3) Seagate Baracude SATA I 7200 RPM drive with 3GB/s transfer rate and only a 32 GB Cach. It's ok. I would have expected at least a Western Digital Caviar Black 2 TB SATA III 7200 RPM 64 MB or the Velociraptor at 10,000RPM.
4)APPLE SSD TS256C Flash Drive. As you can see, it doesn't stack up so well against other SSD Drive.
Just average. http://www.harddrivebenchmark.net/hdd_lookup.phphdd=APPLE+SSD+TS256C

Whining and ranting about how iMacs can't do this or iMacs/orMacs can't do that is not going to get you a lot of help here.
Your "I love my MAC" is typical of the ever ubiquitous PC whiner.
If your video work needs were that computer intensive and critical , you should've done some online research and you should have budgeted for a Mac Pro.
Mac Pros are completely expandable and upgradeable unlike the iMac.
Mac Pros have much more faster and more CPU cores than the iMac line.
iMac line is limited to CPUs with 8 cores. The Mac Pros, I believe, are up to 16 core CPUs, now.
The Mac Pros can have their GPU upgraded and you even add/expand to use specialty audio/video cards.
Mac Pros are the defacto standard for real video work.
iMacs, even the high end model, is not really designed to do really heavy and intensive video work.
iMacs do do video creation and editing. Just not on the level that is needed from a more "Pro" computer.
It seems to me you are asking your iMac to do more than it was originally designed for, in terms of professional video editing.
You get a lot more out of a Mac Pro than an iMac for any real serious video, CGI or animation work.
You just didn't want to spend that much cash on one.
iMacs are not user upgradeable or friendly to user upgrades at all!!!
If you purchased a Mac Pro, you could've had that better, faster HD, better faster SSDs.
That said, I can offer no real help to but because of the nature of your post and the fact you just simply annoyed me, I feel some advice and explanations are in order
First off, you picked Adobe video editing software suite as your video creation software on the Mac. It's no secret to long-time video content creators on the Mac that Adobe products, especially those for video creation and editing are very user unfriendly on the Mac. Even though Macs are supported from Adobe, Adobe for a long time has treated the Mac and Mac users as second class citizens.
Before purchasing and installing Adobe Premiere, did you even check Adobe's site for the preferred system hardware and software requirements? Hmmm?
This is why you should KNOW what software you are going to be running on a computer first then research what computer make and model will run said software.
That's why Apple has its own apps like Aoerture, Logic and Final Cut.
Despite your ignorance in this matter, Final Cut Pro X is alive and doing well, thank you, and using this software on your iMac would kick Adobe Premier in the you know whats.
Final Cut Pro X is a complete video solution for and completely designed around the Mac.
Why are you using USB 2.0 connections for video work when you have a perfectly good FireWire 800 connection.
In case you are not aware, FireWire 800 is called so because it has a max throughput of 800 Mbps.
Your 2011 iMac can take up to 32 GBs of RAM. Not just 16 GBs.
This changed when the 2010 model iMacs came out.
Blu-ray? I believe you can buy external Blu-ray writers that work with Mac using said FW800 connection.
So you cite one movie and one videographer using Adobe Premier for your premise that Final Cut is dead in Hollywood?
Your argument that Apple locks you into everything in their world can be countered by saying Windows and Windows PCs lock you into the Windows world. What's your point?
Apple is not discontinuing their computers platforms any time soon.
All you are regurgitating is rumor. Probably from all of the PC crowd.
iMacs and professional desktop Macs are not going anywhere.
Currently, Apple is the only desktop/laptop computer maker that is still making a profit on their Macs and increasing their market share percentages for the last 5 years during which the PC market has continually slumped/dropped in its market share.

[Solved] vfat and iso9660 support?

Similar Messages

Maybe you are looking for