[SOLVED] Video problem after graphic card change

I changed M/B + graphic card and have problem with mplayer and youtube videos:
https://drive.google.com/file/d/0B_jeWg … sp=sharing
Both are nvidia geforce. The new is ASUS GT630-SL-2GD3-L 2GB GDDR3 PCI-E RETAIL
I had and have the same nouveau drivers.
Any idea?
Thank you!
Last edited by hariskar (2014-05-17 03:49:19)

If you're not interested in why nouveau doesn't work, you can mark the thread as solved https://bbs.archlinux.org/viewtopic.php?id=130309
If on the other hand you want to dig into this, please provide more information e.g. some logs, check systemd's journal.

Similar Messages

Fan noise after graphic card changed - Qosmio F10-101

Two months ago i have had my graphic card changed from nvidia fx 5700 to nvidia geforce go 6600.
from my laptop toshiba qosmio f10-101. After changing the old graphic card there is a fan noise that starts and stops every 2 minutes , that it drives me crazy every time i'm hear it.
Can somebody tell me if this noise is natural and if he/she knows if the specific card is noisy in every laptop? or If there are any ways to disappear this noise or increase in the maximum speed the noise.??
Message was edited by: marlena

Hello Marlena
On Qosmio forum you can find few similar topics with few interesting comments. On of http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=10944&messageID=42103
Bye

Help solve the problem after restor iphone 5 ios 7 asks email

Help solve the problem after restor iphone 5 ios 7 asks apple ID
I Forgot apple ID

Only one way- to remember it. There is no way around cause it is a new security feature. Better stress your memory.

Hi I tried to contact with Sydney Apple store but impossible so far. Actually I found my Visa card been conducted 4 transactions in 7th may. I am in Auckland that time. It must be wrong deduction. Can anyone help me solve this problem. My card is visa t

Hi I tried to contact with Sydney Apple store but impossible so far. Actually I found my Visa card been conducted 4 transactions in 7th may. I am in Auckland that time. It must be wrong deduction. Can anyone help me solve this problem.
My card is visa the 4 transactions are:
$19.48, $19.48, $12.98 and $ 25.97
otherwise I need report to police.
Also please forward it to the related department please
Thanks
Kathy
Please
<Personal Information Edited by Host>

You are not addressing Apple here - this is a technical forum and we are all other users here.
You should also not post private info in an open forum - it is too dangerous - I've asked the hosts to remove the financial info and your email address. Anyone on this forum will reply to this thread - no need for an email address.
As for the activity: please call your credit card company immediately to report and question the activity. They can get in touch with the vendor (Apple). Calling the police will not be very helpful.

Video problem after boot [SOLVED]

Hi everyone, I have the this issue
I already installed arch on a vaio VGN-S360 but after it boot the screen first goes white per pixel, I mean each pixel goes from black to white and then to black I don't know how to explain it exactly. The thing is that the screen after boot the system is completely black.
I can access like root, and reboot so I realize that the command line is operational but the screen is no giving me the output.
Can it be a grub problem or a specific hardware issue???
Any suggestion and help will be helpful
thanks everyone
Last edited by k_ibou (2009-11-13 21:40:40)

I found the solution to the issue, this laptop has a ATI graphic card and it seems that the problem is there.
in the boot menu, hit ' e ' for edit the menu settings and and the end of the linux line add radeon.modeset=0
whit that the system goes fine.
I thinks that I should add that line to the menu.lst

Problems with graphics card with Windows 8 bootcamp on new imac

I just purchased a new 2013 imac (27inch, with the nvidia geforce gtx 680mx 2gb).
I partitioned the drive using bootcamp and successfully installed windows 8 pro 64bit as well as the support softward from Apple for the drivers.
My problem is that the display in windows says it is being run by a Microsoft basic display adapter and only using 256mb of memory and doesn't seem to be an Nvidia card at all, let alone the 2gb of video memory I am supposed to have.
I have tried downloading drivers directly from Nvidia, but when I run them it says I don't have compatible hardware.
I'm hoping someone can shed some light on this issue.
Please help.

After I read other discussions on the same topic, I found out that the problem is that when you install the drivers via the Bootcamp "windows support software" USB key, for some reason the NVIDIA drivers are not installed, although they are present in the Bootcamp folder.
How I solved the issue: Starting from the Peripherals Manager window (the one that shows all what is inside your machine), I opened the Graphic card "folder" and double-clicked on the "VGA standard card" line.
Then I clicked on a "install driver" button, browse through files, and selected the NVIDIA folder within the Bootcamp folder on the USB key.
It took some time but after that it had fully recognized the GTX 680 MX card.
I rebooted and the system itself set up to the 2560 x 1440 resolution.

Start Up & Sleep Problem, considering graphics card upgrade, Leopard?

Hi All,
I've searched at length for this problem, and as a user rather than a tech have suspicions, rather than certainty.
Have been suffering with my Mac Pro going intermittently to shutdown rather than sleep for a while, I've been living with that. But a new problem has appeared just in the last day or so, I don't necessarily think they are connected, but what do I know?
The new problem is it seems for want of a better term my Pro stalls on start up, it took an hour before it started this morning, its really quite peculiar.
I hit the start button, initial whirring, then stop, the machine appears to be off, but after 10-20secs, it starts again, then immediately stops, and repeat, and repeat. Strangely though, eventually it starts to get further into boot up each time, maybe it gets to the apple logo, and shutdowns, and repeats, and repeats, then OS X loading screen, shutdown, wait 10secs restarts on its own, eventually it gets to the deskstop and shuts down, before running eventually. It started doing this yesterday, thought it might be because I've moved it a couple of times, connecting an ethernet cable, (awkward having the socket on the back!). So I checked everything firmly seated inside, and very carefully hoovered out the dust (although that wasn't bad).
Reset SMC, reset energy saver settings, ran the tech tool for the Apple Care disk, removed all my crucial.com extra ram, and inserted Apple's original heat sunked RAM, no change.
Anyway its running now and as you can imagine if this going to get worse or a hardware component is on its last legs I'm busy burning dvds of important files, its used mainly for video editing, but I reckon 15 dvds ought to get the important business backed up! As I'm going to book it into Apple as its under an Apple Care policy.
This has got me thinking, is it time to get some upgrades at the same time. No matter how much RAM I have installed, and it doesn't appear to use even half of whats onboard, I've struggled with Motion very slow, often crashing, especially when using HD or Pro Res HD video, so much so that I've stuck to Livetype, which is a shame as its limited, and limiting. I notice Livetype has been dropped FCS. If its not the RAM, is it the graphics card? I was thinking of upgrading Ati HD 3870, or better, but I'm unclear if these are only compatible with Leopard 10.5.x, hence considering upgrading to Leopard. And thought I'd get Apple to do the work at the same time.
As to the start up problem, if it were a vehicle I'd be thinking it was damp electrics, and be spraying WD40 to dry it out, I'm not of course, but I'm thinking power supply, or a temperature issue, but as its working when running 4 hours and working nicely now (so long as I don't leave to 'sleep') I can't see it being an overheating issue.
Anyway sorry to go on but thoughts/advice please?
Its business critical machine, as a videographer although I bought this MacBook Pro, from which I'm typing, for just this scenario which I'll use at a pinch.
Message was edited by: Northern Munkee

You may want to just get one utility for now.
At this point, do you need a new graphic card? then you need to upgrade to Leopard. If your software and system won't be a problem regardless of compatibility great, but make sure. Otherwise, Snow Leopard will likely require lots more upgrades and updates.
But maybe doing an upgrade to Leopard and then test the waters with Leopard and Snow L. makes better sense.
Only the "Early, Early" 2006-7 1st Gen Mac Pros can run 10.4.11 (or at least install and officially supported).
The product pages have misleading information but you do need 10.5.7 for the 4870 which is your best graphics upgrade choice. The 3870 came out a year ago and requires 10.5.3+.

Unable to update system apps after credit card change

Hi all,
A store called (no name) an authorized Apple dealer for Thailand installed a new hard drive 1Tb on my Mac book pro (2009).
Now I am not able to update system app originally installed on my mac like iPhoto, iMovie and GarageBand.
I get the message:
My question:
How can I get these system apps back to my mac?
To explain the problem:
my original hard drive started to get really slow and after a mavericks update.
All of a sudden Appstore has stopped working and wouldn't start up.
I was unable to do updates and also Pages , Numbers and terminal stopped working.
After googling what the problem could be I have learned that there might be a application causing the problem a third party app I later found out.
I went to the store and I asked if a upgrade with a new hard drive (1Tb) and memory (8gb) could solve the problem, the said yes and i agreed to do this installation!
Unfortunately the store just installed the hard drive but was unable to provide me with the memory as agreed so now i have only the 1tb hard drive.
The system incl. Pages , Numbers and terminal now is working again, not really faster but improved a bit and this also included the startup time, except the items mentioned above. ( iPhoto, iMovie and GarageBand)
By the way:
I did change my CC as I am in Asia and my old card was running out of date!
I had a different Apple Id because i had purchased the Mac in Thailand and changed the store and Id to Spain (for CC reasons) but was never a problem if i had updates in the past!
Thanks for any advice.

I don't know if it will solve your original problem, but the Vodafone software needs to be reinstalled or removed.
Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and except as stated in this comment, I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button. The uninstaller might also be accessed by clicking theCustomize button, if there is one.
Back up all data before making any changes.
You will generally have to restart the computer in order to complete an uninstallation. Until you do that, there may be no effect, or unpredictable effects.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software.

Photoshop CS6 running extremely slow after graphics card switch

My old graphics card died (a evga 8800 Ultra Superclocked 756MB 384 bit), so I replaced it with a (XFX HD-455X-ZAFR Radeon HD 4550 1GB 64-bit DDR2 PCI Express 2.0 x16 ). I knew this was a less capable card but from reading other forums it seemed that GPU performance was not as big of an issue in Photoshop and the 4550 was a supported card by Photoshop. However, I was previously able to batch open about 15 (ish) photos at a time to work on in Photoshop. Now if I open more than 1 everything is VERY slow and even that 1 doesn't open as fast. Bigger photos appear blurry (but when I zoom in they are not) many filters are slower. Very annoying. Nothing else has changed on my computer, just the graphics card. Here are my specs (I know I need more RAM and have been considering an upgrade there but am not sure if I need to ditch my current video card as well)
Asustek p5e3 motherboard
Core 2 extreme qx9650 (quad core at 3.0 ghz)
4 GB of DDR3 1333mhz ram
(3) 500 GB 7200RPM hard drives
Radeon HD 4550 1GB 64-bit DDR2
500 Watt Power Supply

I don't mean to be critical, but why would you upgrade to an outdated card like the 4550? The 4000-series isn't even listed under the cards Photoshop is tested with any more.
Tested video cards for Photoshop CC and CC 2014
That said, a problem that can happen with a video card switch is that drivers get left in the system from the old one.
Maybe it would be a good start in diagnosing this for you go to into the Help - System Info menu, copy the data in the whole first section, and post it here.
-Noel

[SOLVED] Unexpected problems after installing systemd

Hi there,
Since I read that Arch is going to start using systemd I decided to install it. I followed the systemd wiki article (https://wiki.archlinux.org/index.php/Sy … g_to_start) and at first sight everything seemed OK and I didn't have much problems with it. My only serious problem was that the network-manager plasmoid in KDE was not working properly - it stated that Network Manager was not started. After searching the forums I found out that the problem was due to my pam login file for lightdm not configured properly and I managed to fix the problem. However after several days of use I found out the following additional problems:
1. Removable drives not working - before usb flash drives and sd cards were automounted by KDE when i inserted them. Now nothing happens (I tested with a usb flash drive and an sd memory card).
2. My laptop's touchpad feels very slugish and scroll is not working. After I tried to check the touchpad settings in the KDE control centre I found out while all the touchpad settings are present, they are greyed out and can't be changed.
3. Sound is extremely choppy in wine games. In native linux games (Faster Than Light for example) it is OK. It is also OK in other native linux applications like clementine and mplayer. I am using pulseaudio which i've set up in accordance with the pulseaudio wiki article.
I tried to recall any problems I may have had while setting up systemd and the onlything ordinary i can thing about was that when i tried to do "systemctl enable dbus.service" (because the systemd wiki article advised me to "systemctl enable" all daemons listed in my former rc.conf) I got the following output: "The unit files have no [Install] section. They are not meant to be enabled using systemctl.". On the other hand the dbus.service seems to be running just fine:
"dbus.service loaded active running D-Bus System Message Bus"
Has anyone encounter similar problems when using systemd?
Best regards!
Last edited by hellfire[bg] (2012-10-14 19:36:59)

I had some time to tweak my system and i have an update on my problems - the 1st and 2nd problems were solved by reverting back to initscripts and setting up systemd again. I can swear i followed the same instructions (on the arch linux wiki page) as before but somehow after it did it those problems disappeared. I am now running a pure systemd system and everything appears to be OK. Regarding the 3rd problem it turned out that it was a pulseaudio issue. After I set up pulseaudio initialy I checked wine and it was running fine but apparently I have tweaked my pulseaudio setup since then and this broke wine. Systemd being the biggest change to my system before i detected the problem, i assumed that it was the reaseon. However it seems that pulseaudio was the culprit and after a little tweking with its configuration file it seems to be OK now. If anyone has the problem, this setting described in the arc wiki was the reason for my problem - https://wiki.archlinux.org/index.php/Pu … _crackling . Using the default set up (as opposed to the option described in the wiki) solved my problem.
Pse, here's the output of what you requested, ran as a normal user (in pastebin):
http://pastebin.com/w5A1F9jf
Last edited by hellfire[bg] (2012-10-14 19:39:30)

Problem Installing Graphic Card Driver in Lenovo G505s AMD A8

Configuration Processor - AMD A8-5550M RAM - 8GB (4*4 configuration) OS - Windows 10 (Upgraded From Windows 8.1) Graphics - AMD Radeon HD 8650G + HD 8570M Dual Graphics I have upgraded my system on 30th July to Windows 10 Pro. Now i am unable to install Graphic Card Driver.I Even tried unninstalling the Drivers using DDU(Display Driver Unnistaller) in Safe Mode and tried Re-installing Driver but while reinstalling Driver my system always Restarts and installation interrupts in between I tried this 4 times then i tried using without driver but my laptop used to get thermal shutdown.So Finally i performed a System Restore, but i wanted to perform a clean install for which this problem must be solved as i won't be able to do system restore after clean install. One more Problem after i've upgraded to windows 10 my graphic driver is recognized differently as R5 M200 but actually its HD 8570M. Observations Whlile installing Driver :Laptop gets Heated and restarts firstly i thought its a Thermal Shut Down but it restarted and i even tried to preform the installation after placing my laptop in front of air-conditioner but it again restarted.Help me out finding the solution for this problem.Warm Regards,Rishabh

Hi,
Hope you've already tried this from HP support page:
h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943827&swItemId=ob_148736_1&swEnvOid=4053#tab-history
If so,
Uninstall AMD graphics from Device Manager.
Restart system.
Download, save & install this:
support.amd.com/en-us/download/mobile?os=Windows%207%20-%2032
Restart system
Check.
Regards
Visruth

Problem with graphic card

Hello!.I have a problem with my notebook .So i know that when I bought my notebook it had a AMD HD 3450 graphic card but in dx diag it shows that I hava a Mobile intel(R) 4 Series Express Chipset Family and I dont know why.Could you please tell me why it doesen't recognize the amd graphic or at least if intel is better than amd ,and if it is could you tell me the intel model please.
Reply asap. Thank you!
This question was solved.
View Solution.

Hello @CrazyWolf ,
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Even though this is a Commercial product, the Switchable Graphics feature allows you to switch between using the Intel graphics and a discrete graphics controller like AMD in a computer. For example, you can switch between the enhanced battery life of the Intel graphics while running on laptop battery power and the performance capabilities of the discrete graphics controller while the laptop is plugged into AC power. Your Notebook will automatically switch to the Intel graphics if the computer changes to battery power, or it can switch to the discrete graphics if the computer is plugged into AC power. Some computers use third party software to do the switch.
I hope this help explain this.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

HP 500-054 problem with graphics card

I just bought my HP 500-054 PC and also bought an upgraded graphics card and a more powerful, power supply to run the graphics card...to the best of my knowledge the graphics card (XFX radeon R7770 ultra OC edition) is set up properly in my PC and connected to the new power supply. If i try to boot from the new graphics card nothing displays on my monitor and the PC just beeps 3 times. If I boot from the onboard graphics card then everything works like it should. I'm wondering if anyone has advice on this if maybe i set up the graphics card wrong or if there are settings on the PC I need to change. Any help would be greatly appreciated

Hi:
Your second assumption is correct.
There are settings in the BIOS you need to change when installing an non-HP video adapter in a PC with W8.
Please read the info at the link below and you should be all set after following the guidance there.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03653200&cc=us&dlc=en&lc=en&jumpid=reg_r1002_us...

G62-b45em problem with graphic card

First of all, my english is not so good, sorry about that.
I'm using Windows 8.
I have a problem with my graphic card, it just wont start. I mean the ATI Radeon, you can see here witch exactly.
I downloaded the driver from this page, but I think it wont match.
Here is also a screenshot with the error that i found in Device Manager. If you need more information that i can provide to you just tell me.
This question was solved.
View Solution.

Hello Nocar. I understand you're having some trouble getting your video driver to work properly in Windows 8.
This error means that the device cannot start due to not having the proper driver. I searched and there does not seem to be an official driver for this hardware. However, a lot of users have reported success with installing the Windows 7 drivers in compatibility mode. You should take a look at this thread which a colleague of mine posted. It covers a possible fix for getting switchable graphics to work in Windows 8.
I hope the thread is helpful. Let me know the result.
Have a great afternoon!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Lost CONTACT list after SIM card change requested by operator

Dear All, this is my first post, so please bear with me. I am recurring to this forum to ask for HELP on an issue that is really annoying, specially after spending over an hour with a BlackBerry Support Person who tried many steps to solve the issue without any luck [it was obvious this person did not have the technical expertise to handle the problem at hand]. Here's the story: Last week I received on the mail a new SIM card with a letter indicating I had to replace my "old" SIM card with this new one, after receiving a text message from the operator. On Friday I received the SMS and proceeded with the change. Prior to exchanging SIM Cards, I asked the Call Center Agent if this would cause any problems with my 8520 BB. The answer was NO, all the configuration info remains on the device, and not on the SIM card. Well, this was not the case and some applications lost their configuration: email and contacts. Curiously, the BBM service was unaltered. So I would like to know how can I get back my Contact List? (the email service was quickly and easily reconfigured). Apparently my old Contact list is somewhere in the Device's memory... but a New Contact List has been created after the SIM Card change. I know this because when I press the Call History, all the contacts' info is available ... but when pressing the Contacts Address I can only see 1 contact. Any ideas???? Thank You All.

This is a fun little (and I mean little) problem. Let's walk through it here.
1) Some applications lost email and contact configurations.
A) I'm not entirely sure what you mean in particular as far as the email problem goes. Were the e-mails still set up, but you weren't receiving them? Most likely because the new SIM card contained a new ID number. If you were to go to Options > Advanced Options > Host Routing Tables, press the menu button, and hit Register...that should fix your problem there.
2) BBM Service was unaltered.
A) This is because the BBM service is reliant on the PIN number unique to your device (not your SIM card).
3) Lost contact list, but still showing in the call history.
A) Your call history is just data stored on the device, the only time your contact history is access when sending and making a call is just a simple check to see if you have the information stored already to match a name to it. The data stored in history is it's own entity. I explained this in a slightly confusing manner, but it's slightly irrelevant.
It's entirely possible that your contact list was stored on your SIM card and not to your device. Try this out:
-Insert your old SIM card into your phone
-Open up your contacts and hit the menu button
-Scroll down and select "SIM Phone Book"
-Here you should see the list of contacts if they were truly stored on your SIM and not your phone.
-Hit the menu button again, and choose "Copy all to Contacts"
Once the process is complete, you may reinsert the new SIM card and continue on using the phone as normal.
Hope this helps!
Disclaimer: I'm just a regular user like the rest of you. I have spent a lot of time learning the limitations of the Blackberries to know how to fix most problems. If I have suggested a fix, please give a kudo and mark as a solution!

[SOLVED] Video problem after graphic card change

Similar Messages

Maybe you are looking for