[solved]virtualbox bridge-adapter error
I wanna use virtualbox bridge-adapter, virtualbox works fine, and I already installed bridge-utils.
but I cannot found uml_utilities by pacman or yaourt
help, thanks
ps: I use static ip by route
Last edited by dxcqcv (2014-06-27 02:12:26)
I got it, I forgetten to modprobe vboxnetflt, vboxnetadp and vboxpci
no need to use uml_utilities
thx~
Similar Messages
-
[SOLVED]VirtualBox Bridged mode not working
For some reason I am unable to start a virtual machine in host-only or bridged mode. I can do NAT mode but that doesn't really suit what I want to do very well. Here is the message I get when trying bridged mode.
Failed to start the virtual machine Windows XP.
Failed to open/create the internal network 'HostInterfaceNetworking-wlan0' (VERR_SUPDRV_COMPONENT_NOT_FOUND).
One of the kernel modules was not successfully loaded. Make sure that no kernel modules from an older verison of VirtualBox exist. Then try to recompile and reload the kernel modules by executing '/etc/init.d/vboxdrv setup' as root
(VERR_SUPDRV_COMPONENT_NOT_FOUND).
I can't run /etc/init.d/vboxdrv because it doesn't exist. I installed Vbox via Pacman and I'm embarassed to admit I don't really know where it is. I just launch it by right clicking on my desktop (using fluxbox).
Any ideas on where to go next?
also here are my vbox logs
00:00:00.534 VirtualBox 3.0.10_OSE r54097 linux.x86 (Nov 1 2009 19:44:00) release log
00:00:00.534 Log opened 2009-12-01T18:11:07.107676000Z
00:00:00.535 OS Product: Linux
00:00:00.535 OS Release: 2.6.30-ARCH
00:00:00.535 OS Version: #1 SMP PREEMPT Wed Sep 9 12:37:32 UTC 2009
00:00:00.535 Host RAM: 1956MB RAM, available: 1801MB
00:00:00.535 Executable: /usr/lib/virtualbox/VirtualBox
00:00:00.535 Process ID: 1818
00:00:00.535 Package type: LINUX_32BITS_GENERIC (OSE)
00:00:00.579 SUP: Loaded VMMR0.r0 (/usr/lib/virtualbox/VMMR0.r0) at 0xf9119060 - ModuleInit at 00000000f912c340 and ModuleTerm at 00000000f912c300
00:00:00.579 SUP: VMMR0EntryEx located at 00000000f912c1e0, VMMR0EntryFast at 00000000f912b530 and VMMR0EntryInt at 00000000f912b350
00:00:00.638 VBoxSharedClipboard mode: Bidirectional
00:00:00.739 ************************* CFGM dump *************************
00:00:00.746 pRoot=08bd5490:{/}
00:00:00.746 [/] (level 0)
00:00:00.746 Name <string> = "Windows XP" (cch=11)
00:00:00.746 UUID <bytes> = "52 b4 ff 3b 2d f7 57 4c 92 29 56 34 21 fc da 00" (cb=16)
00:00:00.746 RamSize <integer> = 0x0000000010000000 (268435456)
00:00:00.746 RamHoleSize <integer> = 0x0000000020000000 (536870912)
00:00:00.746 NumCPUs <integer> = 0x0000000000000001 (1)
00:00:00.746 TimerMillies <integer> = 0x000000000000000a (10)
00:00:00.746 RawR3Enabled <integer> = 0x0000000000000001 (1)
00:00:00.746 RawR0Enabled <integer> = 0x0000000000000001 (1)
00:00:00.746 PATMEnabled <integer> = 0x0000000000000001 (1)
00:00:00.746 CSAMEnabled <integer> = 0x0000000000000001 (1)
00:00:00.746 HwVirtExtForced <integer> = 0x0000000000000000 (0)
00:00:00.746 EnableNestedPaging <integer> = 0x0000000000000000 (0)
00:00:00.746 EnableVPID <integer> = 0x0000000000000000 (0)
00:00:00.746 EnablePAE <integer> = 0x0000000000000000 (0)
00:00:00.746
00:00:00.746 [/HWVirtExt/] (level 1)
00:00:00.746 Enabled <integer> = 0x0000000000000001 (1)
00:00:00.746 64bitEnabled <integer> = 0x0000000000000000 (0)
00:00:00.746
00:00:00.746 [/PDM/] (level 1)
00:00:00.746
00:00:00.746 [/PDM/Drivers/] (level 2)
00:00:00.746
00:00:00.746 [/PDM/Drivers/VBoxC/] (level 3)
00:00:00.746 Path <string> = "/usr/lib/virtualbox/components/VBoxC" (cch=37)
00:00:00.746
00:00:00.746 [/Devices/] (level 1)
00:00:00.746
00:00:00.746 [/Devices/pcarch/] (level 2)
00:00:00.746
00:00:00.746 [/Devices/pcarch/0/] (level 3)
00:00:00.746 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.746
00:00:00.746 [/Devices/pcarch/0/Config/] (level 4)
00:00:00.746
00:00:00.746 [/Devices/pcbios/] (level 2)
00:00:00.746
00:00:00.746 [/Devices/pcbios/0/] (level 3)
00:00:00.746 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.746
00:00:00.746 [/Devices/pcbios/0/Config/] (level 4)
00:00:00.746 RamSize <integer> = 0x0000000010000000 (268435456)
00:00:00.746 RamHoleSize <integer> = 0x0000000020000000 (536870912)
00:00:00.746 NumCPUs <integer> = 0x0000000000000001 (1)
00:00:00.746 HardDiskDevice <string> = "piix3ide" (cch=9)
00:00:00.746 FloppyDevice <string> = "i82078" (cch=7)
00:00:00.746 IOAPIC <integer> = 0x0000000000000000 (0)
00:00:00.746 PXEDebug <integer> = 0x0000000000000000 (0)
00:00:00.746 UUID <bytes> = "52 b4 ff 3b 2d f7 57 4c 92 29 56 34 21 fc da 00" (cb=16)
00:00:00.746 BootDevice0 <string> = "FLOPPY" (cch=7)
00:00:00.746 BootDevice1 <string> = "DVD" (cch=4)
00:00:00.746 BootDevice2 <string> = "IDE" (cch=4)
00:00:00.746 BootDevice3 <string> = "NONE" (cch=5)
00:00:00.746
00:00:00.746 [/Devices/8237A/] (level 2)
00:00:00.746
00:00:00.746 [/Devices/8237A/0/] (level 3)
00:00:00.746 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.746
00:00:00.746 [/Devices/pci/] (level 2)
00:00:00.746
00:00:00.746 [/Devices/pci/0/] (level 3)
00:00:00.746 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.746
00:00:00.746 [/Devices/pci/0/Config/] (level 4)
00:00:00.746 IOAPIC <integer> = 0x0000000000000000 (0)
00:00:00.746
00:00:00.746 [/Devices/pckbd/] (level 2)
00:00:00.746
00:00:00.746 [/Devices/pckbd/0/] (level 3)
00:00:00.746 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.746
00:00:00.746 [/Devices/pckbd/0/Config/] (level 4)
00:00:00.746
00:00:00.746 [/Devices/pckbd/0/LUN#0/] (level 4)
00:00:00.746 Driver <string> = "KeyboardQueue" (cch=14)
00:00:00.746
00:00:00.746 [/Devices/pckbd/0/LUN#0/Config/] (level 5)
00:00:00.746 QueueSize <integer> = 0x0000000000000040 (64)
00:00:00.746
00:00:00.746 [/Devices/pckbd/0/LUN#0/AttachedDriver/] (level 5)
00:00:00.746 Driver <string> = "MainKeyboard" (cch=13)
00:00:00.746
00:00:00.746 [/Devices/pckbd/0/LUN#0/AttachedDriver/Config/] (level 6)
00:00:00.747 Object <integer> = 0x0000000008bbb510 (146519312)
00:00:00.747
00:00:00.747 [/Devices/pckbd/0/LUN#1/] (level 4)
00:00:00.747 Driver <string> = "MouseQueue" (cch=11)
00:00:00.747
00:00:00.747 [/Devices/pckbd/0/LUN#1/Config/] (level 5)
00:00:00.747 QueueSize <integer> = 0x0000000000000080 (128)
00:00:00.747
00:00:00.747 [/Devices/pckbd/0/LUN#1/AttachedDriver/] (level 5)
00:00:00.747 Driver <string> = "MainMouse" (cch=10)
00:00:00.747
00:00:00.747 [/Devices/pckbd/0/LUN#1/AttachedDriver/Config/] (level 6)
00:00:00.747 Object <integer> = 0x0000000008bbb5e8 (146519528)
00:00:00.747
00:00:00.747 [/Devices/i82078/] (level 2)
00:00:00.747
00:00:00.747 [/Devices/i82078/0/] (level 3)
00:00:00.747 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.747
00:00:00.747 [/Devices/i82078/0/Config/] (level 4)
00:00:00.747 IRQ <integer> = 0x0000000000000006 (6)
00:00:00.747 DMA <integer> = 0x0000000000000002 (2)
00:00:00.747 MemMapped <integer> = 0x0000000000000000 (0)
00:00:00.747 IOBase <integer> = 0x00000000000003f0 (1008)
00:00:00.747
00:00:00.747 [/Devices/i82078/0/LUN#999/] (level 4)
00:00:00.747 Driver <string> = "MainStatus" (cch=11)
00:00:00.747
00:00:00.747 [/Devices/i82078/0/LUN#999/Config/] (level 5)
00:00:00.747 papLeds <integer> = 0x0000000008bbafc4 (146517956)
00:00:00.747 First <integer> = 0x0000000000000000 (0)
00:00:00.747 Last <integer> = 0x0000000000000000 (0)
00:00:00.747
00:00:00.747 [/Devices/i82078/0/LUN#0/] (level 4)
00:00:00.747 Driver <string> = "Block" (cch=6)
00:00:00.747
00:00:00.747 [/Devices/i82078/0/LUN#0/Config/] (level 5)
00:00:00.747 Type <string> = "Floppy 1.44" (cch=12)
00:00:00.747 Mountable <integer> = 0x0000000000000001 (1)
00:00:00.747
00:00:00.747 [/Devices/acpi/] (level 2)
00:00:00.747
00:00:00.747 [/Devices/acpi/0/] (level 3)
00:00:00.747 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.747 PCIDeviceNo <integer> = 0x0000000000000007 (7)
00:00:00.747 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:00.747
00:00:00.747 [/Devices/acpi/0/Config/] (level 4)
00:00:00.747 RamSize <integer> = 0x0000000010000000 (268435456)
00:00:00.747 RamHoleSize <integer> = 0x0000000020000000 (536870912)
00:00:00.747 NumCPUs <integer> = 0x0000000000000001 (1)
00:00:00.747 IOAPIC <integer> = 0x0000000000000000 (0)
00:00:00.747 FdcEnabled <integer> = 0x0000000000000001 (1)
00:00:00.747 ShowRtc <integer> = 0x0000000000000000 (0)
00:00:00.747 ShowCpu <integer> = 0x0000000000000000 (0)
00:00:00.747
00:00:00.747 [/Devices/acpi/0/LUN#0/] (level 4)
00:00:00.747 Driver <string> = "ACPIHost" (cch=9)
00:00:00.747
00:00:00.747 [/Devices/acpi/0/LUN#0/Config/] (level 5)
00:00:00.747
00:00:00.747 [/Devices/i8254/] (level 2)
00:00:00.747
00:00:00.747 [/Devices/i8254/0/] (level 3)
00:00:00.747
00:00:00.747 [/Devices/i8254/0/Config/] (level 4)
00:00:00.747
00:00:00.747 [/Devices/i8259/] (level 2)
00:00:00.747
00:00:00.747 [/Devices/i8259/0/] (level 3)
00:00:00.747 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.747
00:00:00.747 [/Devices/i8259/0/Config/] (level 4)
00:00:00.747
00:00:00.747 [/Devices/apic/] (level 2)
00:00:00.747
00:00:00.747 [/Devices/apic/0/] (level 3)
00:00:00.747 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.747
00:00:00.747 [/Devices/apic/0/Config/] (level 4)
00:00:00.747 IOAPIC <integer> = 0x0000000000000000 (0)
00:00:00.747 NumCPUs <integer> = 0x0000000000000001 (1)
00:00:00.747
00:00:00.747 [/Devices/mc146818/] (level 2)
00:00:00.747
00:00:00.747 [/Devices/mc146818/0/] (level 3)
00:00:00.747
00:00:00.747 [/Devices/mc146818/0/Config/] (level 4)
00:00:00.747
00:00:00.747 [/Devices/vga/] (level 2)
00:00:00.747
00:00:00.747 [/Devices/vga/0/] (level 3)
00:00:00.748 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.748 PCIDeviceNo <integer> = 0x0000000000000002 (2)
00:00:00.748 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:00.748
00:00:00.748 [/Devices/vga/0/Config/] (level 4)
00:00:00.748 VRamSize <integer> = 0x0000000003c00000 (62914560)
00:00:00.748 FadeIn <integer> = 0x0000000000000001 (1)
00:00:00.748 FadeOut <integer> = 0x0000000000000001 (1)
00:00:00.748 LogoTime <integer> = 0x0000000000000000 (0)
00:00:00.748 LogoFile <string> = "" (cch=1)
00:00:00.748 ShowBootMenu <integer> = 0x0000000000000002 (2)
00:00:00.748 CustomVideoModes <integer> = 0x0000000000000000 (0)
00:00:00.748 HeightReduction <integer> = 0x0000000000000000 (0)
00:00:00.748
00:00:00.748 [/Devices/vga/0/LUN#0/] (level 4)
00:00:00.748 Driver <string> = "MainDisplay" (cch=12)
00:00:00.748
00:00:00.748 [/Devices/vga/0/LUN#0/Config/] (level 5)
00:00:00.748 Object <integer> = 0x0000000008bbb6c8 (146519752)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/] (level 2)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/0/] (level 3)
00:00:00.748 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.748 PCIDeviceNo <integer> = 0x0000000000000001 (1)
00:00:00.748 PCIFunctionNo <integer> = 0x0000000000000001 (1)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/0/Config/] (level 4)
00:00:00.748 Type <string> = "PIIX4" (cch=6)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/0/LUN#999/] (level 4)
00:00:00.748 Driver <string> = "MainStatus" (cch=11)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/0/LUN#999/Config/] (level 5)
00:00:00.748 papLeds <integer> = 0x0000000008bbafcc (146517964)
00:00:00.748 First <integer> = 0x0000000000000000 (0)
00:00:00.748 Last <integer> = 0x0000000000000003 (3)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/0/LUN#2/] (level 4)
00:00:00.748 Driver <string> = "Block" (cch=6)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/0/LUN#2/Config/] (level 5)
00:00:00.748 Type <string> = "DVD" (cch=4)
00:00:00.748 Mountable <integer> = 0x0000000000000001 (1)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/0/LUN#0/] (level 4)
00:00:00.748 Driver <string> = "Block" (cch=6)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/0/LUN#0/Config/] (level 5)
00:00:00.748 Type <string> = "HardDisk" (cch=9)
00:00:00.748 Mountable <integer> = 0x0000000000000000 (0)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/0/LUN#0/AttachedDriver/] (level 5)
00:00:00.748 Driver <string> = "VD" (cch=3)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/0/LUN#0/AttachedDriver/Config/] (level 6)
00:00:00.748 Path <string> = "/home/royce/.VirtualBox/HardDisks/Windows XP.vdi" (cch=49)
00:00:00.748 Format <string> = "VDI" (cch=4)
00:00:00.748
00:00:00.748 [/Devices/pcnet/] (level 2)
00:00:00.748
00:00:00.748 [/Devices/pcnet/0/] (level 3)
00:00:00.748 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.748 PCIDeviceNo <integer> = 0x0000000000000003 (3)
00:00:00.748 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:00.748
00:00:00.748 [/Devices/pcnet/0/Config/] (level 4)
00:00:00.748 Am79C973 <integer> = 0x0000000000000001 (1)
00:00:00.748 MAC <bytes> = "08 00 27 bb 10 02" (cb=6)
00:00:00.748 CableConnected <integer> = 0x0000000000000000 (0)
00:00:00.748 LineSpeed <integer> = 0x0000000000000000 (0)
00:00:00.748
00:00:00.748 [/Devices/pcnet/0/LUN#999/] (level 4)
00:00:00.748 Driver <string> = "MainStatus" (cch=11)
00:00:00.748
00:00:00.748 [/Devices/pcnet/0/LUN#999/Config/] (level 5)
00:00:00.748 papLeds <integer> = 0x0000000008bbb094 (146518164)
00:00:00.749
00:00:00.749 [/Devices/pcnet/0/LUN#0/] (level 4)
00:00:00.749 Driver <string> = "IntNet" (cch=7)
00:00:00.749
00:00:00.749 [/Devices/pcnet/0/LUN#0/Config/] (level 5)
00:00:00.749 Trunk <string> = "wlan0" (cch=6)
00:00:00.749 TrunkType <integer> = 0x0000000000000003 (3)
00:00:00.749 Network <string> = "HostInterfaceNetworking-wlan0" (cch=30)
00:00:00.749 SharedMacOnWire <integer> = 0x0000000000000001 (1)
00:00:00.749
00:00:00.749 [/Devices/e1000/] (level 2)
00:00:00.749
00:00:00.749 [/Devices/serial/] (level 2)
00:00:00.749
00:00:00.749 [/Devices/parallel/] (level 2)
00:00:00.749
00:00:00.749 [/Devices/VMMDev/] (level 2)
00:00:00.749
00:00:00.749 [/Devices/VMMDev/0/] (level 3)
00:00:00.749 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.749 PCIDeviceNo <integer> = 0x0000000000000004 (4)
00:00:00.749 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:00.749
00:00:00.749 [/Devices/VMMDev/0/Config/] (level 4)
00:00:00.749
00:00:00.749 [/Devices/VMMDev/0/LUN#0/] (level 4)
00:00:00.749 Driver <string> = "MainVMMDev" (cch=11)
00:00:00.749
00:00:00.749 [/Devices/VMMDev/0/LUN#0/Config/] (level 5)
00:00:00.749 Object <integer> = 0x0000000008bbbac0 (146520768)
00:00:00.749
00:00:00.749 [/Devices/VMMDev/0/LUN#999/] (level 4)
00:00:00.749 Driver <string> = "MainStatus" (cch=11)
00:00:00.749
00:00:00.749 [/Devices/VMMDev/0/LUN#999/Config/] (level 5)
00:00:00.749 papLeds <integer> = 0x0000000008bbb0b4 (146518196)
00:00:00.749 First <integer> = 0x0000000000000000 (0)
00:00:00.749 Last <integer> = 0x0000000000000000 (0)
00:00:00.749
00:00:00.749 [/Devices/AudioSniffer/] (level 2)
00:00:00.749
00:00:00.749 [/Devices/AudioSniffer/0/] (level 3)
00:00:00.749
00:00:00.749 [/Devices/AudioSniffer/0/Config/] (level 4)
00:00:00.749
00:00:00.749 [/Devices/AudioSniffer/0/LUN#0/] (level 4)
00:00:00.749 Driver <string> = "MainAudioSniffer" (cch=17)
00:00:00.749
00:00:00.749 [/Devices/AudioSniffer/0/LUN#0/Config/] (level 5)
00:00:00.749 Object <integer> = 0x0000000008bbb500 (146519296)
00:00:00.749
00:00:00.749 [/Devices/ichac97/] (level 2)
00:00:00.749
00:00:00.749 [/Devices/ichac97/0/] (level 3)
00:00:00.749 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.749 PCIDeviceNo <integer> = 0x0000000000000005 (5)
00:00:00.749 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:00.749
00:00:00.749 [/Devices/ichac97/0/Config/] (level 4)
00:00:00.749
00:00:00.749 [/Devices/ichac97/0/LUN#0/] (level 4)
00:00:00.749 Driver <string> = "AUDIO" (cch=6)
00:00:00.749
00:00:00.749 [/Devices/ichac97/0/LUN#0/Config/] (level 5)
00:00:00.749 AudioDriver <string> = "alsa" (cch=5)
00:00:00.749 StreamName <string> = "Windows XP" (cch=11)
00:00:00.749
00:00:00.749 [/TM/] (level 1)
00:00:00.749 UTCOffset <integer> = 0x0000000000000000 (0)
00:00:00.749
00:00:00.749 ********************* End of CFGM dump **********************
00:00:00.749 MM: cbHyperHeap=0x140000 (1310720)
00:00:00.750 Logical host processors: 2, processor active mask: 0000000000000003
00:00:00.750 ************************* CPUID dump ************************
00:00:00.750 RAW Standard CPUIDs
00:00:00.750 Function eax ebx ecx edx
00:00:00.750 Gst: 00000000 00000005 756e6547 6c65746e 49656e69
00:00:00.750 Hst: 0000000a 756e6547 6c65746e 49656e69
00:00:00.750 Gst: 00000001 000006fd 00000800 00000009 078bf1bf
00:00:00.750 Hst: 000006fd 01020800 0000e39d bfebfbff
00:00:00.750 Gst: 00000002 05b0b101 005657f0 00000000 2cb43078
00:00:00.750 Hst: 05b0b101 005657f0 00000000 2cb43078
00:00:00.750 Gst: 00000003 00000000 00000000 00000000 00000000
00:00:00.750 Hst: 00000000 00000000 00000000 00000000
00:00:00.750 Gst: 00000004 00000000 00000000 00000000 00000000
00:00:00.750 Hst: 04000121 01c0003f 0000003f 00000001
00:00:00.750 Gst: 00000005 00000040 00000040 00000000 00000000
00:00:00.750 Hst: 00000040 00000040 00000003 00001110
00:00:00.750 Name: GenuineIntel
00:00:00.750 Supports: 0-5
00:00:00.750 Family: 6 Extended: 0 Effective: 6
00:00:00.750 Model: 15 Extended: 0 Effective: 15
00:00:00.750 Stepping: 13
00:00:00.750 APIC ID: 0x00
00:00:00.750 Logical CPUs: 0
00:00:00.750 CLFLUSH Size: 8
00:00:00.750 Brand ID: 0x00
00:00:00.751 Mnemonic - Description = guest (host)
00:00:00.751 FPU - x87 FPU on Chip = 1 (1)
00:00:00.751 VME - Virtual 8086 Mode Enhancements = 1 (1)
00:00:00.751 DE - Debugging extensions = 1 (1)
00:00:00.751 PSE - Page Size Extension = 1 (1)
00:00:00.751 TSC - Time Stamp Counter = 1 (1)
00:00:00.751 MSR - Model Specific Registers = 1 (1)
00:00:00.751 PAE - Physical Address Extension = 0 (1)
00:00:00.751 MCE - Machine Check Exception = 1 (1)
00:00:00.751 CX8 - CMPXCHG8B instruction = 1 (1)
00:00:00.751 APIC - APIC On-Chip = 0 (1)
00:00:00.751 Reserved = 0 (0)
00:00:00.751 SEP - SYSENTER and SYSEXIT = 0 (1)
00:00:00.751 MTRR - Memory Type Range Registers = 1 (1)
00:00:00.751 PGE - PTE Global Bit = 1 (1)
00:00:00.751 MCA - Machine Check Architecture = 1 (1)
00:00:00.751 CMOV - Conditional Move Instructions = 1 (1)
00:00:00.751 PAT - Page Attribute Table = 1 (1)
00:00:00.751 PSE-36 - 36-bit Page Size Extention = 1 (1)
00:00:00.751 PSN - Processor Serial Number = 0 (0)
00:00:00.751 CLFSH - CLFLUSH Instruction. = 1 (1)
00:00:00.751 Reserved = 0 (0)
00:00:00.751 DS - Debug Store = 0 (1)
00:00:00.751 ACPI - Thermal Mon. & Soft. Clock Ctrl.= 0 (1)
00:00:00.751 MMX - Intel MMX Technology = 1 (1)
00:00:00.751 FXSR - FXSAVE and FXRSTOR Instructions = 1 (1)
00:00:00.751 SSE - SSE Support = 1 (1)
00:00:00.751 SSE2 - SSE2 Support = 1 (1)
00:00:00.751 SS - Self Snoop = 0 (1)
00:00:00.751 HTT - Hyper-Threading Technolog = 0 (1)
00:00:00.751 TM - Thermal Monitor = 0 (1)
00:00:00.751 30 - Reserved = 0 (0)
00:00:00.751 PBE - Pending Break Enable = 0 (1)
00:00:00.751 Supports SSE3 or not = 1 (1)
00:00:00.751 Reserved = 0 (0)
00:00:00.751 DS Area 64-bit layout = 0 (1)
00:00:00.751 Supports MONITOR/MWAIT = 1 (1)
00:00:00.751 CPL-DS - CPL Qualified Debug Store = 0 (1)
00:00:00.751 VMX - Virtual Machine Technology = 0 (0)
00:00:00.751 SMX - Safer Mode Extensions = 0 (0)
00:00:00.751 Enhanced SpeedStep Technology = 0 (1)
00:00:00.751 Terminal Monitor 2 = 0 (1)
00:00:00.751 Supports Supplemental SSE3 or not = 0 (1)
00:00:00.751 L1 Context ID = 0 (0)
00:00:00.751 Reserved = 0x0 (0x0)
00:00:00.751 CMPXCHG16B = 0 (1)
00:00:00.751 xTPR Update Control = 0 (1)
00:00:00.751 Perf/Debug Capability MSR = 0 (1)
00:00:00.751 Reserved = 0x0 (0x0)
00:00:00.751 Direct Cache Access = 0 (0)
00:00:00.751 Supports SSE4_1 or not = 0 (0)
00:00:00.751 Supports SSE4_2 or not = 0 (0)
00:00:00.751 Supports the x2APIC extensions = 0 (0)
00:00:00.751 Supports MOVBE = 0 (0)
00:00:00.751 Supports POPCNT = 0 (0)
00:00:00.751 Reserved = 0x0 (0x0)
00:00:00.751 Supports XSAVE = 0 (0)
00:00:00.751 Supports OSXSAVE = 0 (0)
00:00:00.751 Reserved = 0x0 (0x0)
00:00:00.751
00:00:00.751 RAW Extended CPUIDs
00:00:00.751 Function eax ebx ecx edx
00:00:00.751 Gst: 80000000 80000008 00000000 00000000 00000000
00:00:00.751 Hst: 80000008 00000000 00000000 00000000
00:00:00.751 Gst: 80000001 00000000 00000000 00000000 00000000
00:00:00.751 Hst: 00000000 00000000 00000001 20100000
00:00:00.751 Gst: 80000002 65746e49 2952286c 6e655020 6d756974
00:00:00.751 Hst: 65746e49 2952286c 6e655020 6d756974
00:00:00.751 Gst: 80000003 20295228 6c617544 50432020 54202055
00:00:00.751 Hst: 20295228 6c617544 50432020 54202055
00:00:00.751 Gst: 80000004 30303433 20402020 36312e32 007a4847
00:00:00.751 Hst: 30303433 20402020 36312e32 007a4847
00:00:00.751 Gst: 80000005 00000000 00000000 00000000 00000000
00:00:00.751 Hst: 00000000 00000000 00000000 00000000
00:00:00.751 Gst: 80000006 00000000 00000000 04004040 00000000
00:00:00.751 Hst: 00000000 00000000 04004040 00000000
00:00:00.751 Gst: 80000007 00000000 00000000 00000000 00000000
00:00:00.751 Hst: 00000000 00000000 00000000 00000000
00:00:00.751 Gst: 80000008 00003024 00000000 00000000 00000000
00:00:00.751 Hst: 00003024 00000000 00000000 00000000
00:00:00.751 Gst: 80000009 07280202 00000000 00000000 00000503*
00:00:00.751 Hst: 07280202 00000000 00000000 00000503
00:00:00.751 Ext Name:
00:00:00.751 Ext Supports: 0x80000000-0x80000008
00:00:00.751 Family: 0 Extended: 0 Effective: 0
00:00:00.751 Model: 0 Extended: 0 Effective: 0
00:00:00.751 Stepping: 0
00:00:00.751 Brand ID: 0x000
00:00:00.751 Mnemonic - Description = guest (host)
00:00:00.751 FPU - x87 FPU on Chip = 0 (0)
00:00:00.751 VME - Virtual 8086 Mode Enhancements = 0 (0)
00:00:00.751 DE - Debugging extensions = 0 (0)
00:00:00.751 PSE - Page Size Extension = 0 (0)
00:00:00.751 TSC - Time Stamp Counter = 0 (0)
00:00:00.751 MSR - K86 Model Specific Registers = 0 (0)
00:00:00.751 PAE - Physical Address Extension = 0 (0)
00:00:00.751 MCE - Machine Check Exception = 0 (0)
00:00:00.751 CX8 - CMPXCHG8B instruction = 0 (0)
00:00:00.751 APIC - APIC On-Chip = 0 (0)
00:00:00.751 10 - Reserved = 0 (0)
00:00:00.751 SEP - SYSCALL and SYSRET = 0 (0)
00:00:00.751 MTRR - Memory Type Range Registers = 0 (0)
00:00:00.751 PGE - PTE Global Bit = 0 (0)
00:00:00.751 MCA - Machine Check Architecture = 0 (0)
00:00:00.751 CMOV - Conditional Move Instructions = 0 (0)
00:00:00.751 PAT - Page Attribute Table = 0 (0)
00:00:00.751 PSE-36 - 36-bit Page Size Extention = 0 (0)
00:00:00.751 18 - Reserved = 0 (0)
00:00:00.751 19 - Reserved = 0 (0)
00:00:00.751 NX - No-Execute Page Protection = 0 (1)
00:00:00.751 DS - Debug Store = 0 (0)
00:00:00.751 AXMMX - AMD Extensions to MMX Instr. = 0 (0)
00:00:00.751 MMX - Intel MMX Technology = 0 (0)
00:00:00.751 FXSR - FXSAVE and FXRSTOR Instructions = 0 (0)
00:00:00.751 25 - AMD fast FXSAVE and FXRSTOR Instr.= 0 (0)
00:00:00.751 26 - 1 GB large page support = 0 (0)
00:00:00.751 27 - RDTSCP instruction = 0 (0)
00:00:00.751 28 - Reserved = 0 (0)
00:00:00.751 29 - AMD Long Mode = 0 (1)
00:00:00.751 30 - AMD Extensions to 3DNow = 0 (0)
00:00:00.751 31 - AMD 3DNow = 0 (0)
00:00:00.751 LahfSahf - LAHF/SAHF in 64-bit mode = 0 (1)
00:00:00.751 CmpLegacy - Core MP legacy mode (depr) = 0 (0)
00:00:00.751 SVM - AMD VM Extensions = 0 (0)
00:00:00.751 APIC registers starting at 0x400 = 0 (0)
00:00:00.751 AltMovCR8 - LOCK MOV CR0 means MOV CR8 = 0 (0)
00:00:00.751 Advanced bit manipulation = 0 (0)
00:00:00.751 SSE4A instruction support = 0 (0)
00:00:00.751 Misaligned SSE mode = 0 (0)
00:00:00.751 PREFETCH and PREFETCHW instruction = 0 (0)
00:00:00.751 OS visible workaround = 0 (0)
00:00:00.751 Instruction based sampling = 0 (0)
00:00:00.751 SSE5 support = 0 (0)
00:00:00.751 SKINIT, STGI, and DEV support = 0 (0)
00:00:00.751 Watchdog timer support. = 0 (0)
00:00:00.751 31:14 - Reserved = 0x0 (0x0)
00:00:00.751 Full Name: Intel(R) Pentium(R) Dual CPU T3400 @ 2.16GHz
00:00:00.751 TLB 2/4M Instr/Uni: res0 0 entries
00:00:00.751 TLB 2/4M Data: res0 0 entries
00:00:00.751 TLB 4K Instr/Uni: res0 0 entries
00:00:00.751 TLB 4K Data: res0 0 entries
00:00:00.751 L1 Instr Cache Line Size: 0 bytes
00:00:00.751 L1 Instr Cache Lines Per Tag: 0
00:00:00.751 L1 Instr Cache Associativity: res0
00:00:00.751 L1 Instr Cache Size: 0 KB
00:00:00.751 L1 Data Cache Line Size: 0 bytes
00:00:00.751 L1 Data Cache Lines Per Tag: 0
00:00:00.751 L1 Data Cache Associativity: res0
00:00:00.751 L1 Data Cache Size: 0 KB
00:00:00.751 L2 TLB 2/4M Instr/Uni: off 0 entries
00:00:00.751 L2 TLB 2/4M Data: off 0 entries
00:00:00.751 L2 TLB 4K Instr/Uni: off 0 entries
00:00:00.751 L2 TLB 4K Data: off 0 entries
00:00:00.751 L2 Cache Line Size: 0 bytes
00:00:00.751 L2 Cache Lines Per Tag: 0
00:00:00.751 L2 Cache Associativity: off
00:00:00.751 L2 Cache Size: 0 KB
00:00:00.751 APM Features:
00:00:00.751 Physical Address Width: 36 bits
00:00:00.751 Virtual Address Width: 48 bits
00:00:00.751 Physical Core Count: 0
00:00:00.751
00:00:00.751 RAW Centaur CPUIDs
00:00:00.751 Function eax ebx ecx edx
00:00:00.751 Gst: c0000000 07280202 00000000 00000000 00000503
00:00:00.751 Hst: 07280202 00000000 00000000 00000503
00:00:00.751 Gst: c0000001 07280202 00000000 00000000 00000503
00:00:00.751 Hst: 07280202 00000000 00000000 00000503
00:00:00.751 Gst: c0000002 07280202 00000000 00000000 00000503
00:00:00.751 Hst: 07280202 00000000 00000000 00000503
00:00:00.751 Gst: c0000003 07280202 00000000 00000000 00000503
00:00:00.751 Hst: 07280202 00000000 00000000 00000503
00:00:00.751 Centaur Supports: 0xc0000000-0x07280202
00:00:00.751 Mnemonic - Description = guest (host)
00:00:00.751 AIS - Alternate Instruction Set = 0 (1)
00:00:00.751 AIS-E - AIS enabled = 0 (1)
00:00:00.751 RNG - Random Number Generator = 0 (0)
00:00:00.751 RNG-E - RNG enabled = 0 (0)
00:00:00.751 LH - LongHaul MSR 0000_110Ah = 0 (0)
00:00:00.751 FEMMS - FEMMS = 0 (0)
00:00:00.751 ACE - Advanced Cryptography Engine = 0 (0)
00:00:00.751 ACE-E - ACE enabled = 0 (0)
00:00:00.751 ACE2 - Advanced Cryptography Engine 2 = 0 (1)
00:00:00.751 ACE2-E - ACE enabled = 0 (0)
00:00:00.751 PHE - Hash Engine = 0 (1)
00:00:00.751 PHE-E - PHE enabled = 0 (0)
00:00:00.751 PMM - Montgomery Multiplier = 0 (0)
00:00:00.751 PMM-E - PMM enabled = 0 (0)
00:00:00.751
00:00:00.751
00:00:00.751 ******************** End of CPUID dump **********************
00:00:00.775 REM: VBoxREM32
00:00:00.779 TM: GIP - u32Mode=1 (SyncTSC) u32UpdateHz=75
00:00:00.812 TM: cTSCTicksPerSecond=0x7474ed92 (1 953 820 050) fTSCVirtualized=true fTSCUseRealTSC=false
00:00:00.812 TM: fMaybeUseOffsettedHostTSC=true TSCTiedToExecution=false TSCNotTiedToHalt=false
00:00:00.812 CoreCode: R3=b3f47000 R0=f805a000 RC=a02b0000 Phys=0000000035e14000 cb=0x2000
00:00:00.891 [SMP] BIOS with 1 CPUs
00:00:00.928 SUP: Loaded VBoxDDR0.r0 (/usr/lib/virtualbox/VBoxDDR0.r0) at 0xf8151060 - ModuleInit at 0000000000000000 and ModuleTerm at 0000000000000000
00:00:00.939 SUP: Loaded VBoxDD2R0.r0 (/usr/lib/virtualbox/VBoxDD2R0.r0) at 0xf809c060 - ModuleInit at 0000000000000000 and ModuleTerm at 0000000000000000
00:00:00.939 Activating Local APIC
00:00:00.939 CPUMSetGuestCpuIdFeature: Enabled APIC
00:00:00.939 CPUMSetGuestCpuIdFeature: Disabled x2APIC
00:00:00.939 PIT: mode=3 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:00:00.953 Shared Folders service loaded.
00:00:01.003 VDInit finished
00:00:01.003 PIIX3 ATA: LUN#0: disk, PCHS=4161/16/63, total number of sectors 4194304
00:00:01.003 PIIX3 ATA: LUN#1: no unit
00:00:01.003 PIIX3 ATA: LUN#2: CD/DVD, total number of sectors 0, passthrough disabled
00:00:01.003 PIIX3 ATA: LUN#3: no unit
00:00:01.003 PIIX3 ATA: Ctl#0: finished processing RESET
00:00:01.103 PIIX3 ATA: Ctl#1: finished processing RESET
00:00:01.204 IntNet#0: szNetwork={HostInterfaceNetworking-wlan0} enmTrunkType=3 szTrunk={wlan0} fFlags=0x1 cbRecv=223232 cbSend=36864
00:00:01.204 PDM: Failed to construct 'pcnet'/0! VERR_SUPDRV_COMPONENT_NOT_FOUND (-3700) - The component factory was not found.
00:00:01.214 ERROR [COM]: aRC=NS_ERROR_FAILURE (0x80004005) aIID={0a51994b-cbc6-4686-94eb-d4e4023280e2} aComponent={Console} aText={Failed to open/create the internal network 'HostInterfaceNetworking-wlan0' (VERR_SUPDRV_COMPONENT_NOT_FOUND).
00:00:01.214 One of the kernel modules was not successfully loaded. Make sure that no kernel modules from an older version of VirtualBox exist. Then try to recompile and reload the kernel modules by executing '/etc/init.d/vboxdrv setup' as root (VERR_SUPDRV_COMPONENT_NOT_FOUND)} aWarning=false, preserve=false
00:00:01.220 Power up failed (vrc=VERR_SUPDRV_COMPONENT_NOT_FOUND, rc=NS_ERROR_FAILURE (0X80004005))
Last edited by K-radical (2009-12-07 17:42:13)wonder wrote:be sure that the modules are loaded. lsmod | grep vbox.
for bridged you have to load vboxnetflt
Thanks a bunch...
sudo modprobe vboxnetflt
did it. -
Can anyone Solve the JDBC adapter error :
Hi experts!!!
Whn I run File(FTP) to MSSQL Server ( JDBC), I m getting an error
<b>
Receiver Adapter v1027 for Party '', Service 'BS_JDBC_R2':
Configured at 12:16:42 2007-01-05
Last message processing started 12:17:09 2007-01-05, Error: Accessing database connection 'jdbc:Microsoft:sqlserver://sapep:1433;databaseName=tescra' failed: java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket.
Addtional information: JDBC driver 'com.microsoft.jdbc.sqlserver.SQLServerDriver' loaded successfully, additional driver information:
Available JDBC drivers:
com.microsoft.jdbc.sqlserver.SQLServerDriver, 2.2 JDBC compliant</b>
Pls help me.... I have to clear it up.....
<b>If anyone solves this they gud gud points from me...trust me..really!!!!!</b>
Thanks in advance....hi,
have a look at this:
http://support.microsoft.com/kb/313178
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a> -
(SOLVED) Virtualbox bridged network, windows host, arch guest
I am trying to get my archlinux guest's network working again. It was working before I bridged the connection and changed the adaptor to the bridged one, but I want a bridged connection for certain reasons, so I want it working. This is the result I get when I use sudo dchcpcd eth0:
dhcpcd: version 5.0.7 starting
dhcpcd: eth0: rebinding lease of 10.0.2.15
dhcpcd: eth0: broadcasting for a lease
dhcpcd: eth0: offered 192.168.0.199 from 192.168.0.1
dhcpcd: eth0: acknowledged 192.168.0.199 from 192.168.0.1
dhcpcd: eth0: checking for 192.168.0.199
dhcpcd: eth0: hardware address 00:le:8c:85:a6:4d claims 192.168.0.199
dhcpcd: eth0: send_raw_packet: Bad file descriptor
dhcpcd: eth0: rebinding lease of 10.0.2.15
dhcocd: timed out
I have no clue why it's not working, but I am sort of new to linux and virtual machines. Still, can anyone help me get the bridged connection working?
EDIT: Nevermind, I fixed it.
Last edited by Shade Vortex (2009-09-08 14:48:50)All I did was unbridge my windows network. You only select the bridged network from virtualbox, don't manually bridge your network!
If you windows network is not bridged with your vm's host only network in the windows networking page, then I dunno what your problem is. -
[solved] VirtualBox(Arch host, XP guest): Bridged Adapter
It's fairly easy to enable it in VirtualBox. But whenever I start the xp, VirtualBox gives me:
Failed to start the virtual machine XP.
Failed to open/create the internal network 'HostInterfaceNetworking-eth0' (VERR_SUPDRV_COMPONENT_NOT_FOUND).
One of the kernel modules was not successfully loaded. Make sure that no kernel modules from an older version of VirtualBox exist. Then try to recompile and reload the kernel modules by executing '/etc/init.d/vboxdrv setup' as root (VERR_SUPDRV_COMPONENT_NOT_FOUND).
My VirtualBox version is Version 3.1.4. And this is the first time I try it, so there should be no "older version" exists in my computer...
(I am trying to use it to connet to the vpn server in my department, the default NAT connection won't do it, that's why I need the bridged adapter).
I will really appreciate if anyone can help.
Last edited by horsecool (2010-04-06 16:40:39)Check that vboxnetflt is loaded if you have already put it in your modules line in rc.conf
lsmod | grep vbox
If not load it manually:
insmod /lib/modules/2.6.32-ARCH/misc/vboxnetflt.ko
You can put this in your /etc/rc.local for a more permanent solution.
http://bbs.archlinux.org/viewtopic.php?id=85990 -
How to solve ORA-12560:TNS:protocol adapter error?
I'm trying to use sqlplus on Windows 2008 R2 which is installed on VirtualBox to access an Oracle 11gR2 database on Red Hat Linux.
I'm sure that the database on Red Hat Linux is up and tnsnames.ora is a copy from another machine which is used by another application to connect to the same Oracle database.
When I run sqlplus, I got the ORA-12560: TNS:protocol adapter error.
sqlnet.ora
SQLNET.AUTHENTICATION_SERVICES = (NTS)
Both sqlnet.ora and tnsnames.ora are located in c:\app\administrator\product\11.2.0\client64\network\admin folder.
The registry ORACL_HOME has c:\app\administrator\product\11.2.0\client64.
echo %ORACLE_HOME% incommand window returns %ORACLE_HOME%
echo %ORACL_SID% in command window returns %ORACLE_SID%
If I set ORACLE_HOME to another folder, I will get the following error:
Error 6 initializing SQL*Plus
SP2-0667: Message file sp1<lang>.msb not found
SP2-0750: You may need to set ORACLE_HOME to your Oracle software directory
So, I believe the ORACLE_HOME in registry has the correct value.
I have also tried set ORACLE_SID to the service name listed in tnsnames.ora but sqlplus still returns the ORA-12560:TNS:protocol adapter error.
For unknown reason, the value of ORACLE_HOME and ORACLE_SID I set by using set command will not persist after I close the command window that I set the values.881656 wrote:
I'm trying to use sqlplus on Windows 2008 R2 which is installed on VirtualBox to access an Oracle 11gR2 database on Red Hat Linux.
I'm sure that the database on Red Hat Linux is up and tnsnames.ora is a copy from another machine which is used by another application to connect to the same Oracle database.
When I run sqlplus, I got the ORA-12560: TNS:protocol adapter error.
sqlnet.ora
SQLNET.AUTHENTICATION_SERVICES = (NTS)
It make NO sense do to as above when attempting to connect to Oracle DB on *NIX
which knows NOTHING about NTS Authentication.
SQLNET.AUTHENTICATION_SERVICES = (NONE)
or just remove the line or whole file.
Also need to be sure that ipchains is disabled on *NIX system -
How to solve the ORA-12560: TNS:protocol adapter error
Hello All,
when i am am trying to connecting the database i am getting the error ORA-12560: TNS:protocol adapter error
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>set oracle_sid=QUANTUM
C:\Windows\system32>sqlplus / as sysdba
SQL*Plus: Release 11.2.0.3.0 Production on Mon Jul 15 12:54:50 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
ERROR:
ORA-12560: TNS:protocol adapter error
Enter user-name:
My TNS File is below : -
# tnsnames.ora Network Configuration File: C:\app\Onkar\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
QVS =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = qvs)
LISTENER_QVS =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
Oradb11g_home1=
(DESCRIPTION=
(ADDRESS_LIST=
(ADDRESS=(PROTOCOL=TCP)(HOST=115.111.50.61)(PORT=1522))
(CONNECT_DATA=
(SERVER=DEDICATED)
(SERVICE_NAME=test)
Listener :-
# listener.ora Network Configuration File: C:\app\Onkar\product\11.2.0\dbhome_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\app\Onkar\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:C:\app\Onkar\product\11.2.0\dbhome_1\bin\oraclr11.dll")
(SID_DESC =
(SID_NAME = QUANTUM)
(ORACLE_HOME = C:\app\Onkar\product\11.2.0\dbhome_1)
(ENVS = "EXTPROC_DLLS=ONLY:C:\app\Onkar\product\11.2.0\dbhome_1\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
ADR_BASE_LISTENER = C:\app\onkar
sqlnet .ora :-
# sqlnet.ora Network Configuration File: C:\app\Onkar\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
Reply Quick:-
PLZZZZZ
Thanks in advance:-
shekharMicrosoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>set oracle_sid=QUANTUM
C:\Windows\system32>sqlplus / as sysdba
SQL*Plus: Release 11.2.0.3.0 Production on Mon Jul 15 12:54:50 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
ERROR:
ORA-12560: TNS:protocol adapter error
This is a local connection (called an internal connect in the old days). The connection does not go via the Listener. It is a local IPC connection. And as you can see, you do not supply a database schema and password as credentials - the o/s user and environment need to provide the credentials.
So I would not expect a TNS protocol adapter error, as this usually indicates a network driver related problem.
For a local IPC connection to work, TWO_TASK must not be set, and ORACLE_SID and ORACLE_HOME must be set (and valid). The local client driver needs to launch an Oracle server process (dedicated server process to service the client driver). It finds that executable in ORACLE_HOME/bin. Next it needs that server process to "attach" itself to the database's brains (the SGA). This shared memory area is identified via the ORACLE_HOME and ORACLE_SID variables.
There also is a requirement that the dedicated server process created, has the o/s permissions to attach to the SGA - which means it needs to be run as the same o/s user as the owner of the shared memory (in other words, the client should be running in the same o/s user as the database processes).
Thus the need to have these variables set. And no need for using a Listener - it is not a factor. -
Virtualbox bridged networking problem
Hi out there.
I'm trying to set up VirtualBox bridged networking as described in the wiki by "the arch way"
Here are the relevant details of my config files:
/etc/conf.d/bridges:
bridge_br0="eth0"
BRIDGE_INTERFACES=(br0)
/etc/vbox/interfaces:
vbox0 nofoo br0
(Where nofoo is supposed to be the user running virtualbox)
And finally...
/etc/rc.conf:
MODULES=(e1000e snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore bridge vboxdrv vboxnet)
lo="lo 127.0.0.1"
eth0="eth0 up"
br0="dhcp"
INTERFACES=(lo eth0 br0)
So. I added the user to the vboxusers group.
After a reboot, myifconfig says:
br0 Link encap:Ethernet HWaddr 00:21:70:0B:D7:11
inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::221:70ff:fe0b:d711/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2001 errors:0 dropped:0 overruns:0 frame:0
TX packets:1561 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:908314 (887.0 Kb) TX bytes:290103 (283.3 Kb)
eth0 Link encap:Ethernet HWaddr 00:21:70:0B:D7:11
inet6 addr: fe80::221:70ff:fe0b:d711/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2039 errors:0 dropped:0 overruns:0 frame:0
TX packets:1569 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:941218 (919.1 Kb) TX bytes:289875 (283.0 Kb)
Memory:fdfc0000-fdfe0000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:280 (280.0 b) TX bytes:280 (280.0 b)
Which should be ok.
My settings in VirtualBox itself are the following:
adapted to:host interface
interface name:vbox0
The start and stop program parameters are left empty.
Now, when i try to start my vm, the following error message occurs:
Failed to initialize Host Interface Networking.
VBox status code: -3100 (VERR_HOSTIF_INIT_FAILED).
Errorcode:
NS_ERROR_FAILURE (0x80004005)
Component:
Console
Interface:
IConsole {e3c6d4a1-a935-47ca-b16d-f9e9c496e53e}
Does anyone of you know what went wrong here?
regards
monksteve___ wrote:i just "pacman -S virtualbox-ose" but I do not have the file "/etc/rc.d/vboxnet". I searched through the {core,extra,community}.files.tar.gz tar files as well.
Yeah, I have this same issue. I installed virtualbox-ose using pacman and also don't have /etc/rc.d/vboxnet. I've searched the entire machine and it is nowhere to be found. Did you solve it? Anyone got any ideas? -
File adapter error after updating to SP19 (INBOUND_BINDING_ERROR)
File adapter error after updating to SP19 (INBOUND_BINDING_ERROR)
Hi all,
im having some troubles after the installation of SP19 (from SP16 in NW04) with File Adapter (File->Idoc scenario).
In message monitoring (Adapter Engine), I have several messages with status "System Error". The error text is :
<i>Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR
ErrorText: ErrorStack: Error in sender agreement for party '', service 'LEGACY_DEV', interface namespace 'http://XXXXX.com/XXXXXX', interface 'INTERFACE_OB' No sender agreement found for , , , , ,</i>
Im sure that the Integration Directory settings have not been changed. So I tried the following, but the problem persists:
- Deactivation/Activation of File Adapter channel
- check that user XIISUSER is not locked
- checked SXI_CACHE (it seems ok)
- Many CPA full refresh
- Dummy modifications of File Adapter channels (a dummy modification of the description)
- Reboot J2EE
I've seen that someone else had problems after upgrading to SP19. I'd really appreciate any suggestion of how to solve my issue.
Thank you
ManuelHi Prabhu,
I've already tried to restart server, but nothing happened. (Before update to SP19, the interface worked well).
This is the error log from message monitoring:
<i> 2007-01-16 16:37:34 Success Channel cc_File_Snd_Bolle: Entire file content converted to XML format
2007-01-16 16:37:34 Success Send binary file "BOLLE_20061229142059.CSV" from FTP server "AS810T:/sapinbound", size 8733 bytes with QoS EOIO
2007-01-16 16:37:34 Success Application attempting to send an XI message asynchronously using connection AFW.
2007-01-16 16:37:34 Success Trying to put the message into the send queue.
2007-01-16 16:37:35 Success Message successfully put into the queue.
2007-01-16 16:37:35 Success The application sent the message asynchronously using connection AFW. Returning to application.
2007-01-16 16:37:35 Success The message was successfully retrieved from the send queue.
2007-01-16 16:37:35 Success File "BOLLE_20061229142059.CSV" successfully archived on FTP server "AS810T" as "/sapinbound/bolle/20070116-163735-245_BOLLE_20061229142059.CSV"
2007-01-16 16:37:35 Success The message status set to DLNG.
<b>2007-01-16 16:37:35 Error Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR ErrorText: ErrorStack: Error in sender agreement for party '', service 'LEGACY_DEV', interface namespace http://XXXXX.com/XXXXXX', interface 'INTERFACE_OB' No sender agreement found for , , , , ,
2007-01-16 16:37:35 Error Transmitting the message to endpoint http://SERVERNAME:8000/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: INBOUND_BINDING_ERROR:. </b>
2007-01-16 16:37:35 Success The asynchronous message was successfully scheduled to be delivered at Tue Jan 16 16:42:35 CET 2007.
2007-01-16 16:37:35 Success The message status set to WAIT.
2007-01-16 16:42:35 Success Retrying to send message. Retry: 1</i>
After this, the system try to resend the message, and the same error appears several times.
Ty,
Manuel -
Oracle 8i tns:protocol adapter error
Hello,
I am programmer and wanted to try and learn oracle
database. I am trying to install Oracle 8i Releae 8.1.5
developer edition (which I got with a book) on windows NT 4.0
with service pack 6. But after doing a minimal install when and
creating a database I am unable to access that database using
SQL plus. Whenever I try to connect an error message is
displayed saying:
"ora12560TNS: protocol adapter error."
I tried to install it on my friends machine on one
friends computer it worked but on another's it didn't work. Same
message appears on that friends machine also who is using
windows 2000 professional.
Could you please tell me what could be the problem.
Because I am able to connect to database using mmc snap-in
provided for database administration.
Also during installation it displays a message about a
single missing .tmp file in a sub-directory which is many levels
deeper than the directory where oracle is being installed. File
name I think is nmconf.tmp.
I hope you can suggest me some way to solve this problem.
Sukhwinder SinghCheck if you have enough space and the required permissions to write to the temporary directory used by the installer during installation.
We had a similar problem on a UNIX installation which was eventually traced to a non-writable temporary directory that caused the installation to silently fail, which effectively caused the TCP/IP protocol adapter not to be installed. -
ORA-12560: Protocol adapter error
Hi All,
I've installed Oracle Developer 10g and make the Net Configuration Assistant which is successful, but when I run the form it gives me this error:
ORA-12560: Protocol adapter error
I know this error and solved it before but I forgot how!
So how to solve it Plz?hi
try to modify registry.
something like this.
create a String value and name it local and then for Value data add "ORCL" and please check u r own SID.
sarah -
TNS-12541: TNS:no listener TNS-12560: TNS:protocol adapter error TNS-00511: No listener
Dear Team,
When I am trying to start my LISTENER on my Windows server manually its showing error like The OracleOraDb11g_home1TNSListener service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.I Have created LISTENER twice also.When I am checking status on CMD prompt below is error is showing.Please help me out how to solve the issue.
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=<host name>)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC0)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Regards,
Praveen KHi,
Did you check whether the windows service for listener is up and running? if not please start it, by typing "services.msc" in run window and start the service. Then check whether you have listener.ora file in $ORACLE_HOME/network/admin and also post listener.ora contents.
Regards,
Pradeep. V -
ORA-12560: TNS: protocol adapter error while linking tables in Access
One of my app dev is encountering an interesting error message while linking Oracle tables from Access. I am not able to able to reproduce this in my desktop or anywhere else. Details enclosed. Can you guys point me to a solution? Thanks in advance!
ODBC: Oracle Client version 10.2.0.1
Desktop : Win XP ; Access 2003
=>Able to login to the Oracle database sucessfully using sqlplus.
=>Able to create an ODBC datasource to Oracle database.("Test Connection" works fine)
=>But encountering the TNS protocol adpater error while linking the table(Access->File->Get External Data-> Link tables).
=>Not able to link any table in any schema in any Oracle database. Hence this is not a data centric issue.
What did I do?
=> Uninstalled Oracle 8 client and installed Oracle 10 client. No luck. Encountering the same error.
=> Turned on the ODBC trace and reproduced the error. The log is enclosed:
MSACCESS 79c-ed4 ENTER SQLAllocEnv
HENV * 0013C620
MSACCESS 79c-ed4 EXIT SQLAllocEnv with return code 0 (SQL_SUCCESS)
HENV * 0x0013C620 ( 0x09d31788)
MSACCESS 79c-ed4 ENTER SQLAllocConnect
HENV 09D31788
HDBC * 0013C730
MSACCESS 79c-ed4 EXIT SQLAllocConnect with return code 0 (SQL_SUCCESS)
HENV 09D31788
HDBC * 0x0013C730 ( 0x09d31830)
MSACCESS 79c-ed4 ENTER SQLSetConnectOption
HDBC 09D31830
SQLINTEGER 103 <SQL_LOGIN_TIMEOUT>
SQLPOINTER 0x00000014
MSACCESS 79c-ed4 EXIT SQLSetConnectOption with return code 0 (SQL_SUCCESS)
HDBC 09D31830
SQLINTEGER 103 <SQL_LOGIN_TIMEOUT>
SQLPOINTER 0x00000014 (BADMEM)
MSACCESS 79c-ed4 ENTER SQLSetConnectAttrW
SQLHDBC 09D31830
SQLINTEGER 30002 <unknown>
SQLPOINTER [Unknown attribute 30002]
SQLINTEGER -3
MSACCESS 79c-ed4 EXIT SQLSetConnectAttrW with return code 0 (SQL_SUCCESS)
SQLHDBC 09D31830
SQLINTEGER 30002 <unknown>
SQLPOINTER [Unknown attribute 30002]
SQLINTEGER -3
MSACCESS 79c-ed4 ENTER SQLDriverConnectW
HDBC 09D31830
HWND 001D04E4
WCHAR * 0x74329A38 [ -3] "******\ 0"
SWORD -3
WCHAR * 0x74329A38
SWORD 2
SWORD * 0x00000000
UWORD 1 <SQL_DRIVER_COMPLETE>
MSACCESS 79c-ed4 EXIT SQLDriverConnectW with return code -1 (SQL_ERROR)
HDBC 09D31830
HWND 001D04E4
WCHAR * 0x74329A38 [ -3] "******\ 0"
SWORD -3
WCHAR * 0x74329A38
SWORD 2
SWORD * 0x00000000
UWORD 1 <SQL_DRIVER_COMPLETE>
DIAG [S1000] [Oracle][ODBC][Ora]ORA-12560: TNS: protocol adapter error (12560)
DIAG [IM006] [Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed (0)
DIAG [IM006] [Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed (0)
MSACCESS 79c-ed4 ENTER SQLErrorW
HENV 09D31788
HDBC 09D31830
HSTMT 00000000
WCHAR * 0x0013C5EC (NYI)
SDWORD * 0x0013C638
WCHAR * 0x047EE8B8
SWORD 4095
SWORD * 0x0013C624
MSACCESS 79c-ed4 EXIT SQLErrorW with return code 0 (SQL_SUCCESS)
HENV 09D31788
HDBC 09D31830
HSTMT 00000000
WCHAR * 0x0013C5EC (NYI)
SDWORD * 0x0013C638 (12560)
WCHAR * 0x047EE8B8 [ 126] "[Oracle][ODBC][Ora]ORA-12560: TNS: protocol adapter error\ a\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0"
SWORD 4095
SWORD * 0x0013C624 (126)
MSACCESS 79c-ed4 ENTER SQLErrorW
HENV 09D31788
HDBC 09D31830
HSTMT 00000000
WCHAR * 0x0013C5EC (NYI)
SDWORD * 0x0013C638
WCHAR * 0x047EE950
SWORD 4019
SWORD * 0x0013C624
MSACCESS 79c-ed4 EXIT SQLErrorW with return code 0 (SQL_SUCCESS)
HENV 09D31788
HDBC 09D31830
HSTMT 00000000
WCHAR * 0x0013C5EC (NYI)
SDWORD * 0x0013C638 (0)
WCHAR * 0x047EE950 [ 66] "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed"
SWORD 4019
SWORD * 0x0013C624 (66)
MSACCESS 79c-ed4 ENTER SQLErrorW
HENV 09D31788
HDBC 09D31830
HSTMT 00000000
WCHAR * 0x0013C5EC (NYI)
SDWORD * 0x0013C638
WCHAR * 0x047EE9E6
SWORD 3944
SWORD * 0x0013C624
MSACCESS 79c-ed4 EXIT SQLErrorW with return code 0 (SQL_SUCCESS)
HENV 09D31788
HDBC 09D31830
HSTMT 00000000
WCHAR * 0x0013C5EC (NYI)
SDWORD * 0x0013C638 (0)
WCHAR * 0x047EE9E6 [ 66] "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed"
SWORD 3944
SWORD * 0x0013C624 (66)
MSACCESS 79c-ed4 ENTER SQLErrorW
HENV 09D31788
HDBC 09D31830
HSTMT 00000000
WCHAR * 0x0013C5EC (NYI)
SDWORD * 0x0013C638
WCHAR * 0x047EEA7C
SWORD 3869
SWORD * 0x0013C624
MSACCESS 79c-ed4 EXIT SQLErrorW with return code 100 (SQL_NO_DATA_FOUND)
HENV 09D31788
HDBC 09D31830
HSTMT 00000000
WCHAR * 0x0013C5EC (NYI)
SDWORD * 0x0013C638
WCHAR * 0x047EEA7C
SWORD 3869
SWORD * 0x0013C624
MSACCESS 79c-ed4 ENTER SQLFreeConnect
HDBC 09D31830
MSACCESS 79c-ed4 EXIT SQLFreeConnect with return code 0 (SQL_SUCCESS)
HDBC 09D31830
Edited by: user5598619 on Feb 10, 2009 5:37 PMThanks a lot for your quick reply.
I've read all the posts mentioned (quite a few more) but I couldn't find any suggested solution to the "non-oracle10g"-problem other than using the global db name instead of the sid - which didn't help in our case:
However, in a last desperate attempt to solve the problem on my own before launching another cry-for-help-post I did try running the configuration assistant using the correct password for the SYS user 8-} and - strange but true - it did work :-)
Needless to say: I used the global db name of course, so I can't say what would have happened without it, but I trust your hint was a legitimate one.
Anyway - I gues that error Message concerning a "non-oracle10g database" was slightly misleading in this case.... grrrr.
Andreas -
ORA-12560 TNS protocol adapter error--URGENT HELP!
To Experts:
I tried to log in the SQL by using the username: system, manager for password. however, it gave me the message:
ORA-12560 TNS protocol adapter error.
I am using Oracle 9i and Developer 6 in Wins XP environment.
Thank you much!Yes,Thank you very much.I am ok to invoke these commands.
the listener started already.The listener name is just LISTENER.But i still can't login sql plus.Help me on.
hi,Mr sb92075
Do you use what kind of messenger?If we can communicate on messenger,it will facilitate solving my problem I think.I don't mean to disrespect you but I just want to overcome the problem very quickly.
with best regards,
Ian Su
Can I know very clearly?
what are the things(eg dbname,username,protocol I don't know exactly just guessing)needed to connect to the database?
I already installed oracle developer suite 10 and oracle 10g xe database server.
I can't login to sqlplus and what are the things i need to check to get connected to the database from sqlplus?
I appreciate your help and need somebody help.
Edited by: Ian Su on Jun 18, 2011 11:21 PM
Edited by: Ian Su on Jun 18, 2011 11:29 PM -
ORA-12560: TNS:protocol adapter error while configuring ORACLE Workflow
Hi,
I am trying to configure ORACLE Workflow. I have given sys password and other parameters in the given format in Workflow Configuration Assistant. My DB Server is in my local network and I connect to it using SID in SQL Plus. But I got the following error while WorlflowCA tries to execute relevant script.
ERROR:
ORA-12560: TNS:protocol adapter error
SP2-0640: Not connected
WorkflowCA: Non-Oracle10g database detected
If anybody is having any clues, please help me.
Thanks in advance
Ajish M.Thanks a lot for your quick reply.
I've read all the posts mentioned (quite a few more) but I couldn't find any suggested solution to the "non-oracle10g"-problem other than using the global db name instead of the sid - which didn't help in our case:
However, in a last desperate attempt to solve the problem on my own before launching another cry-for-help-post I did try running the configuration assistant using the correct password for the SYS user 8-} and - strange but true - it did work :-)
Needless to say: I used the global db name of course, so I can't say what would have happened without it, but I trust your hint was a legitimate one.
Anyway - I gues that error Message concerning a "non-oracle10g database" was slightly misleading in this case.... grrrr.
Andreas
Maybe you are looking for
-
The application Skype quit unexpectedly...
Hopefully I'm not re-asking a settled top[ic - but I didn't find anything searching. The subject line pretty much covers it. I haven't used Skype much and not for a few months now and it used to work fine. Just wanted to revive it the other day so I
-
Spry Menu+Flash Content: Visibility Problem in IE
Hi, I created a web page with Dreamweaver CS3, and I put a Spry Menu just over a Flash Banner. I set the wmode to transparent and it works fine on all browser except for IE. It still doesn't display the submenus which are hidden by the .swf file. I r
-
My new (second-hand) iphone 4s will not charge. What do I do?
Please help. My new (to me, but second-hand) iphone 4s will not charge. What do I do?
-
Line polarity important for FXO ports
I spent several hours trying to get the FXO ports working on my UC320W without success until, in a moment of desperation, I reversed the polarity on the phone line I was using for testing and suddenly everything's working nicely. I've gotten spoiled
-
Cannot Clear or reset WRT120N to re-install
I have this router that wouldn't connect because I lost the password. I held the reset button for 90 seconds and it neverwould reset. Is there a trick to this procedure? Thanks in advance