[SOLVED] Virtualbox VM Hard Locks Entire Machine

This is a very strange issue. I have a Windows 7 VM that I use for school. Last week, it was working just fine. However, today whenever I start the VM, my entire laptop hard locks. It locks so hard that I cannot switch to a TTY, the mouse cursor is froze, the screen stops, it's locked up HARD and the only thing I can do is forcefully turn it off.
This VM is critical for me, is there any way to get this working again?
Edit: I forgot to mention I tried rebuilding the kernel modules and restarting.
Last edited by jlacroix (2010-09-03 19:58:21)

loafer wrote:
jlacroix wrote:It looks like rebuilding virtualbox_bin from AUR solved it. I wonder if it's possible to find out what happened, so I can avoid this from happening again?
See wonder's post.  What is required is:
/etc/rc.d/vboxdrv setup
I did do that before posting this thread, and it did not fix it.

Similar Messages

  • Flash content locks entire machine

    I'm using Mozilla Firefox 2.0.0.3 with Flash Player 9 under
    Windows 2000 Pro SP4. Flash content continually results in an
    unrecoverable lockup of my machine. Anyone have this issue, and
    possibly a solution? I've already reinstalled Flash Player and my
    browser, and updated all my drivers.

    loafer wrote:
    jlacroix wrote:It looks like rebuilding virtualbox_bin from AUR solved it. I wonder if it's possible to find out what happened, so I can avoid this from happening again?
    See wonder's post.  What is required is:
    /etc/rc.d/vboxdrv setup
    I did do that before posting this thread, and it did not fix it.

  • Latest PowerStrip hard-locks

    Is anyone experiencing this?
    For me it hard-locks the machine every time I try to start it. If I uninstall, clean the PowerStrip directory and re-install, it shows the HW it detected, but when you say OK, it hard-locks the machine. (Reset being the only thing that works). I found an old version of PS that works fine with my setup, but was wondering if anyone is having this porblem too.
    I have an nForce 420 board, 256MB ram (2 sticks, 1,2), BIOS 2.3.
    I'm running WinME, Video drivers: 30.84
    It also happened on all the 28.xx and 29.xx drivers.
    Anyone?
    M.-

    Yeap.. got the same problem here

  • JDev Locks up entire machine

    I have recently moved from a Dell Inspiron 8100 (Pentium III 1.0Ghz w/512mb of RAM)to a Inspiron 8200 (Pentium IV 1.6Ghz w/512mb of RAM) and I am now experiencing problems with my entire machine locking up when I run JDev. The lockup does not occur with any particular action. Sometimes it happens within a few minutes of opening Jdeveloper and other times I can run for an hour or so. It locks up the machine so that the only way to recover is to shut it off at the power switch. I have heard of issues with Pentium 4s and the JVM but I am not sure this is the case. I dowloaded the latest version from OTN and reinstalled JDev. I even went so far as to rebuild my entire workspace and all of the projects it contains. The lockup happens in both JDev RC2 and Jdev Version 9.0.2.829.
    Any ideas what could be causing this?
    Thanks,
    Brad Gibson

    Have you had any other problems with the Inspiron 8200? I have an 8100 (1.1MHz, 512Mb RAM), and I experienced lockups with the original BIOS. After upgrading the BIOS to a later revision, the lockups at least seem to have gone away. In my case, the lockups would happen doing lots of different thinks - using IE, or sometimes just copying lots of files. Needless to say, it was a very serious problem.
    From what I remember reading, the lockups were due to overheating issues, and the BIOS fixes adjusted the fans so they run more frequently. The problems seemed to occur more often when using third-party RAM (like I was), due to differences in the power consumption and size of the DIMMs. Hopefully Dell didn't build the 8200 with the same problem.
    I would suggest checking the Dell support newsgroups to see if other 8200 users are experiencing lockups with their machines, and if, they are, if there are known solutions.
    If this turns out to not be the case, please let us know, and we can investigate other possibilities.
    - John McGinnis
    Oracle9i JDeveloper Team

  • Lots of hard locks and kernel crashes/oops ["SOLVED"-bad motherboard]

    I have been experiencing a lot of hard locks and kernel crashes/oops(es?) lately. This computer has always had random freezes in both WinXP and Linux (various distributions -- including live cds).
    Here is my latest crash (from dmesg):
    PCI: setting IRQ 12 as level-triggered
    PCI: Found IRQ 12 for device 0000:02:05.0
    Bad pte = dfbdf272, process = ???, vm_flags = 3f3f, vaddr = b7e6d0ac
    Pid: 1470, comm: load-modules.sh Not tainted 2.6.25-ARCH #1
    [<c016e775>] handle_mm_fault+0x2c5/0x850
    [<c011d0c9>] do_page_fault+0x2a9/0x790
    [<c014169d>] hrtimer_start+0xdd/0x1e0
    [<c0125a16>] hrtick_set+0xc6/0x140
    [<c03053ef>] schedule+0x3af/0x850
    [<c01437e5>] getnstimeofday+0x35/0xe0
    [<c01419e8>] ktime_get+0x18/0x40
    [<c0305a76>] preempt_schedule+0x56/0x70
    [<c012386f>] wake_up_new_task+0x8f/0xd0
    [<c0128643>] do_fork+0xd3/0x2b0
    [<c011ce20>] do_page_fault+0x0/0x790
    [<c0307d52>] error_code+0x72/0x78
    [<c0300000>] cpu_init+0x220/0x29a
    =======================
    VM: killing process load-modules.sh
    lshwd output:
    00:00.0 Class 0600: Intel Corp.|82865G [Springdale-G] Chipset Host Bridge (intel-agp)
    00:01.0 Class 0604: Intel Corp.|82865G/PE/P Processor to AGP Controller (unknown)
    00:1d.0 Class 0c03: Intel Corp.|USB Controller (uhci_hcd)
    00:1d.1 Class 0c03: Intel Corp.|USB Controller (uhci_hcd)
    00:1d.2 Class 0c03: Intel Corp.|USB Controller (uhci_hcd)
    00:1d.3 Class 0c03: Intel Corp.|82801EB USB EHCI Controller #2 (uhci_hcd)
    00:1d.7 Class 0c03: Intel Corp.|USB Enhanced Controller (ehci-hcd)
    00:1e.0 Class 0604: Intel Corp.|82820 815e (Camino 2) Chipset PCI (hw_random)
    00:1f.0 Class 0601: Intel Corp.|82801EB ISA Bridge (LPC) (i810-tco)
    00:1f.1 Class 0101: Intel Corp.|82801EB ICH5 IDE (ata_piix)
    00:1f.2 Class 0101: Intel Corp.|82801EB ICH5 IDE (SATA) (ata_piix)
    00:1f.3 Class 0c05: Intel Corp.|82801EB SMBus (i2c-i801)
    01:00.0 Class 0300: nVidia Corp.|NV18 GeForce4 MX440 AGP 8x (nv)
    02:05.0 Class 0401: Avance Logic Inc.|ALS4000 Audio Chipset (snd-als4000)
    02:07.0 Class 0200: D-Link System Inc.|DFE 530 TX+ Fast Ethernet Adapter (8139too)
    02:0a.0 Class 0c03: VIA Technologies Inc.|VT82C586B USB (uhci_hcd)
    02:0a.1 Class 0c03: VIA Technologies Inc.|VT82C586B USB (uhci_hcd)
    02:0a.2 Class 0c03: VIA Technologies Inc.|VT8235 USB Enhanced Controller (ehci-hcd)
    relevant entry in grub's menu.lst:
    # (0) Arch Linux-ARCH
    title Arch Linux
    root (hd0,0)
    kernel /boot/vmlinuz26 root=/dev/sda1 ro nosmp noapic acpi=off pci=routeirq ide-legacy
    initrd /boot/kernel26.img
    I added nosmp and the other parameters at the install/rescue cd's suggestion. I tried using the microcode package (I have a P4 HT) as suggested by someone in another thread.
    I've found that the freezes will happen at the beginning of heavy CPU or disk usage (such as compilation or pacman db parsing). The hd is not the original one from this system (it was a hand-me-down), so I don't think that's the problem. The video card is different and the RAM is new. The only components that are still around are:
    P4 HT processor (2.60 ghz)
    Albatron  PX865PE II
    Enermax power supply
    Any ideas? It also says "bad eip value" when the system has kernel crashes (especially on boot).
    Last edited by mrbug (2008-06-21 03:08:35)

    Latest message while mkinitcpio was running:
    Linux agpgart interface v0.103
    nvidia: module license 'NVIDIA' taints kernel.
    ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
    NVRM: loading NVIDIA Linux x86 Kernel Module 96.43.05 Tue Jan 22 19:36:58 PST 2008
    BUG: unable to handle kernel paging request at 756e696c
    IP: [<c018a137>] flush_old_exec+0x577/0x750
    *pde = 00000000
    Oops: 0000 [#1] PREEMPT SMP
    Modules linked in: nvidia(P) agpgart nfnetlink_queue nfnetlink nf_conntrack_ipv4 iptable_filter ip_tables xt_state nf_conntrack xt_NFQUEUE x_tables w83627hf hwmon_vid 8139too mii i2c_i801 i2c_core pcspkr shpchp pci_hotplug sg evdev thermal processor fan button battery ac snd_als4000 gameport snd_sb_common snd_opl3_lib snd_hwdep snd_ice1724 snd_ice17xx_ak4xxx snd_ac97_codec ac97_bus snd_ak4114 snd_pt2258 snd_i2c snd_ak4xxx_adda snd_mpu401_uart snd_rawmidi snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_pcm snd_timer snd_page_alloc snd_mixer_oss snd soundcore e1000 rtc_cmos rtc_core rtc_lib ext3 jbd mbcache usbhid hid ff_memless usb_storage sr_mod cdrom sd_mod ehci_hcd uhci_hcd pata_acpi usbcore ata_piix ata_generic libata scsi_mod dock
    Pid: 9173, comm: dirname Tainted: P (2.6.25-ARCH #1)
    EIP: 0060:[<c018a137>] EFLAGS: 00210202 CPU: 0
    EIP is at flush_old_exec+0x577/0x750
    EAX: 756e696c EBX: 00000000 ECX: 00000500 EDX: df269004
    ESI: de546c00 EDI: 00000000 EBP: df269080 ESP: de121da4
    DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
    Process dirname (pid: 9173, ti=de120000 task=de546c00 task.ti=de120000)
    Stack: 00000001 de694b00 00000000 df269000 df269004 de710504 de710000 de547134
    6e726964 00656d61 c018a39d de121dd4 00000003 de18f878 c035ccb5 de18f840
    c01b73be 00000080 00000001 c13d8ec0 dec77000 de694b00 c016421f 00000001
    Call Trace:
    [<c018a39d>] kernel_read+0x3d/0x60
    [<c01b73be>] load_elf_binary+0x36e/0x1aa0
    [<c016421f>] get_page_from_freelist+0x2cf/0x4d0
    [<c01646ce>] __alloc_pages+0x5e/0x360
    [<c0175705>] anon_vma_prepare+0x85/0xe0
    [<c016eabd>] handle_mm_fault+0x60d/0x850
    [<c016eacb>] handle_mm_fault+0x61b/0x850
    [<c0184b45>] do_sync_read+0xd5/0x120
    [<c016c60d>] vm_normal_page+0x1d/0x70
    [<c016c60d>] vm_normal_page+0x1d/0x70
    [<c016d479>] follow_page+0x119/0x1c0
    [<c016edd1>] get_user_pages+0xd1/0x2f0
    [<c01b7050>] load_elf_binary+0x0/0x1aa0
    [<c01898ec>] search_binary_handler+0x15c/0x290
    [<c018ab9c>] do_execve+0x21c/0x250
    [<c01033c6>] sys_execve+0x46/0x80
    [<c01050d8>] sysenter_past_esp+0x6d/0xa5
    [<c0300000>] cpu_init+0x220/0x29a
    =======================
    Code: c3 04 89 e8 e8 eb d6 17 00 89 5c 24 10 bb ff ff ff ff 8b 54 24 10 83 c3 01 89 df c1 e7 05 8b 02 39 38 0f 86 11 01 00 00 8b 40 08 <8b> 34 98 85 f6 74 e0 c7 04 98 00 00 00 00 89 e8 e8 a4 d9 17 00
    EIP: [<c018a137>] flush_old_exec+0x577/0x750 SS:ESP 0068:de121da4
    ---[ end trace 255f477a12072e9b ]---
    note: dirname[9173] exited with preempt_count 1
    BUG: unable to handle kernel paging request at 6f732e78
    IP: [<c012b737>] put_files_struct+0x37/0xb0
    *pde = 00000000
    Oops: 0000 [#2] PREEMPT SMP
    Modules linked in: nvidia(P) agpgart nfnetlink_queue nfnetlink nf_conntrack_ipv4 iptable_filter ip_tables xt_state nf_conntrack xt_NFQUEUE x_tables w83627hf hwmon_vid 8139too mii i2c_i801 i2c_core pcspkr shpchp pci_hotplug sg evdev thermal processor fan button battery ac snd_als4000 gameport snd_sb_common snd_opl3_lib snd_hwdep snd_ice1724 snd_ice17xx_ak4xxx snd_ac97_codec ac97_bus snd_ak4114 snd_pt2258 snd_i2c snd_ak4xxx_adda snd_mpu401_uart snd_rawmidi snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_pcm snd_timer snd_page_alloc snd_mixer_oss snd soundcore e1000 rtc_cmos rtc_core rtc_lib ext3 jbd mbcache usbhid hid ff_memless usb_storage sr_mod cdrom sd_mod ehci_hcd uhci_hcd pata_acpi usbcore ata_piix ata_generic libata scsi_mod dock
    Pid: 9173, comm: dirname Tainted: P D (2.6.25-ARCH #1)
    EIP: 0060:[<c012b737>] EFLAGS: 00210202 CPU: 0
    EIP is at put_files_struct+0x37/0xb0
    EAX: 6f732e78 EBX: 00000000 ECX: c1407460 EDX: 00000303
    ESI: de546c00 EDI: df399840 EBP: 00200206 ESP: de121bb8
    DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
    Process dirname (pid: 9173, ti=de120000 task=de546c00 task.ti=de120000)
    Stack: df269000 0000000b de546c00 c035c5ec 00200206 c012ce7a c036075c de546e11
    000023d5 00000001 00000000 00000001 00200206 c0308c6c c0360510 de121c00
    de121d6c 00000000 c035c5ec 00200206 c0106e28 de5d5e34 00000000 1f901000
    Call Trace:
    [<c012ce7a>] do_exit+0x16a/0x6a0
    [<c0106e28>] die+0x1b8/0x1c0
    [<c011cfd1>] do_page_fault+0x1b1/0x790
    [<c018cc23>] do_lookup+0xf3/0x1b0
    [<c0197ff3>] __d_lookup+0x143/0x160
    [<c011e6cf>] kunmap_atomic+0x3f/0xe0
    [<c015e059>] file_read_actor+0xd9/0xf0
    [<c0160e3b>] generic_file_aio_read+0x59b/0x630
    [<c019cd83>] mntput_no_expire+0x13/0x70
    [<c017ebf9>] add_partial+0x19/0x70
    [<c0171309>] remove_vma+0x39/0x50
    [<c017fd43>] __slab_free+0xd3/0x360
    [<c017ebf9>] add_partial+0x19/0x70
    [<c0189d8d>] flush_old_exec+0x1cd/0x750
    [<c017fd43>] __slab_free+0xd3/0x360
    [<c0171309>] remove_vma+0x39/0x50
    [<c011ce20>] do_page_fault+0x0/0x790
    [<c0307d52>] error_code+0x72/0x78
    [<c018007b>] alloc_loc_track+0xab/0xc0
    [<c018a137>] flush_old_exec+0x577/0x750
    [<c018a39d>] kernel_read+0x3d/0x60
    [<c01b73be>] load_elf_binary+0x36e/0x1aa0
    [<c016421f>] get_page_from_freelist+0x2cf/0x4d0
    [<c01646ce>] __alloc_pages+0x5e/0x360
    [<c0175705>] anon_vma_prepare+0x85/0xe0
    [<c016eabd>] handle_mm_fault+0x60d/0x850
    [<c016eacb>] handle_mm_fault+0x61b/0x850
    [<c0184b45>] do_sync_read+0xd5/0x120
    [<c016c60d>] vm_normal_page+0x1d/0x70
    [<c016c60d>] vm_normal_page+0x1d/0x70
    [<c016d479>] follow_page+0x119/0x1c0
    [<c016edd1>] get_user_pages+0xd1/0x2f0
    [<c01b7050>] load_elf_binary+0x0/0x1aa0
    [<c01898ec>] search_binary_handler+0x15c/0x290
    [<c018ab9c>] do_execve+0x21c/0x250
    [<c01033c6>] sys_execve+0x46/0x80
    [<c01050d8>] sysenter_past_esp+0x6d/0xa5
    [<c0300000>] cpu_init+0x220/0x29a
    =======================
    Code: 08 0f 94 c0 84 c0 0f 84 88 00 00 00 8b 04 24 31 db 8b 78 04 eb 09 8d b6 00 00 00 00 83 c3 01 89 d8 c1 e0 05 39 07 76 3c 8b 47 0c <8b> 34 98 85 f6 74 ea 89 dd c1 e5 07 f7 c6 01 00 00 00 74 17 89
    EIP: [<c012b737>] put_files_struct+0x37/0xb0 SS:ESP 0068:de121bb8
    ---[ end trace 255f477a12072e9b ]---
    Fixing recursive fault but reboot is needed!
    BUG: scheduling while atomic: dirname/9173/0x00000002
    Pid: 9173, comm: dirname Tainted: P D 2.6.25-ARCH #1
    [<c030542d>] schedule+0x3ed/0x850
    [<c0129763>] release_console_sem+0x1b3/0x1d0
    [<c012d373>] do_exit+0x663/0x6a0
    [<c0106e28>] die+0x1b8/0x1c0
    [<c011cfd1>] do_page_fault+0x1b1/0x790
    [<c01291d7>] __call_console_drivers+0x57/0x70
    [<c01fad04>] number+0x2b4/0x2c0
    [<c01fb76f>] vsnprintf+0x43f/0x790
    [<c024ec7f>] vt_console_print+0x23f/0x330
    [<c016fe66>] free_pgd_range+0x166/0x1e0
    [<c011ce20>] do_page_fault+0x0/0x790
    [<c0307d52>] error_code+0x72/0x78
    [<c017007b>] sys_mincore+0xeb/0x3e0
    [<c012b737>] put_files_struct+0x37/0xb0
    [<c012ce7a>] do_exit+0x16a/0x6a0
    [<c0106e28>] die+0x1b8/0x1c0
    [<c011cfd1>] do_page_fault+0x1b1/0x790
    [<c018cc23>] do_lookup+0xf3/0x1b0
    [<c0197ff3>] __d_lookup+0x143/0x160
    [<c011e6cf>] kunmap_atomic+0x3f/0xe0
    [<c015e059>] file_read_actor+0xd9/0xf0
    [<c0160e3b>] generic_file_aio_read+0x59b/0x630
    [<c019cd83>] mntput_no_expire+0x13/0x70
    [<c017ebf9>] add_partial+0x19/0x70
    [<c0171309>] remove_vma+0x39/0x50
    [<c017fd43>] __slab_free+0xd3/0x360
    [<c017ebf9>] add_partial+0x19/0x70
    [<c0189d8d>] flush_old_exec+0x1cd/0x750
    [<c017fd43>] __slab_free+0xd3/0x360
    [<c0171309>] remove_vma+0x39/0x50
    [<c011ce20>] do_page_fault+0x0/0x790
    [<c0307d52>] error_code+0x72/0x78
    [<c018007b>] alloc_loc_track+0xab/0xc0
    [<c018a137>] flush_old_exec+0x577/0x750
    [<c018a39d>] kernel_read+0x3d/0x60
    [<c01b73be>] load_elf_binary+0x36e/0x1aa0
    [<c016421f>] get_page_from_freelist+0x2cf/0x4d0
    [<c01646ce>] __alloc_pages+0x5e/0x360
    [<c0175705>] anon_vma_prepare+0x85/0xe0
    [<c016eabd>] handle_mm_fault+0x60d/0x850
    [<c016eacb>] handle_mm_fault+0x61b/0x850
    [<c0184b45>] do_sync_read+0xd5/0x120
    [<c016c60d>] vm_normal_page+0x1d/0x70
    [<c016c60d>] vm_normal_page+0x1d/0x70
    [<c016d479>] follow_page+0x119/0x1c0
    [<c016edd1>] get_user_pages+0xd1/0x2f0
    [<c01b7050>] load_elf_binary+0x0/0x1aa0
    [<c01898ec>] search_binary_handler+0x15c/0x290
    [<c018ab9c>] do_execve+0x21c/0x250
    [<c01033c6>] sys_execve+0x46/0x80
    [<c01050d8>] sysenter_past_esp+0x6d/0xa5
    [<c0300000>] cpu_init+0x220/0x29a
    =======================

  • My turn to post a question, USB Flash drive hard lock issues

    So not sure if anyone here will be able to help me. Maybe someone from GS has run into this issue, or someone with tech experience can help. The following is from my post on another forum:
    This issue has really been bugging me. For the last year I've been having an issue with every version of Windows (XP, Vista, Windows 7). When I insert a flash drive the system will work just fine. When I move a single large file to a flash drive it'll work fine, when I move small files or read small files from a flash drive my entire system hard locks.
    Everything freezes, I hit reset, it asks if I want safe mode, then back to the desktop. There are no errors in the error logs. Reliability monitor doesn't show any related issues.
    Being of a technological nature I booted into Ubuntu. Everything works perfectly. Put the drive on my hackbook, and everything worked perfectly. OS X, worked perfectly. Tried it on my girlfriend's Vista laptop, worked perfectly.
    This issue happens with anything that is detected as a portable storage. It happens with my memory card reader, my flash drives (sandisk, pny, kingston and sony) as well as with my sandisk sansa and iriver mp3 players, but when I set those up as MTP devices they work perfectly.
    I have enabled and disabled legacy USB support, re-installed with slipstreamed SP1, xp sp3, vista ultimate without sp1, and the most recent beta of windows 7. Every time I figured it was related to some other USB device, but it's not. Last night I reloaded Vista (without a service pack) and before I installed anything I put a flash drive in and tried transferring some files to it. Hard lock, no other USB devices plugged in, let alone installed.
    Specs:
    AMD Athlon 6400+
    MSI K9A Platinum
    2GB Corsair XMS2
    9600 GSO 512MB
    This is a major inconvience. Putting files on a flash drive should be the easiest thing in the world, not something that should force me into a different OS. Please help!
    Give a man a fish and he'll eat for a day, but hit a man with a brick and you can have all his fish...and his wife!
    My views may not represent the views of my employer, Best Buy.
    Solved!
    Go to Solution.

    You're welcome.
    According to MSI's website, there are multiple ways to flash the BIOS.  Here are the links to their documents on the alternatives.
    How to flash the BIOS CD
    How to flash the BIOS Flash Drive
    How to upgrade BIOS using MSI LiveUpdate Utility
    This page shows all of the BIOS updates available for download for the K9A Platinum.  Probably best to go with the latest release.
    I don't have any MSI products but it looks like LiveUpdate might be the easiest since it works from inside the operating system.  If that will not work for you then I would use CD.  They're easy to make bootable following the guide above.
    Hope this helps you.
    Jacob|Web Planner | Best Buy® Corporate

  • [SOLVED] Virtualbox hangs the host computer

    Hi all,
    It's been some time since I experience this annoying bug :
    Virtualbox completely hangs my computer whenever I click on the "configuration" for any virtual machine.
    Even the magic sysreqs keys are not able to recover (they are enabled in /etc/sysctl.conf) , I'm obliged to hard reboot my machine
    However, I can go into other menus in the GUI without problems. VMs work ok as well.
    My host system :
    3.7.8-1-ARCH #1 SMP PREEMPT Fri Feb 15 03:39:05 EET 2013 x86_64 GNU/Linux
    virtualbox 4.2.6-1
    virtualbox-host-modules 4.2.6-6
    no proprietary extension pack.
    (kernel was upgraded today and the computer rebooted, virtualbox-host-modules were updated as well)
    Using KDE 4.10
    Nvidia integrated graphics (xf86-video-nouveau 1.0.6-1)
    Thanks for any help on how to overcome this bug!
    Last edited by fredo696 (2013-02-16 13:03:13)

    Problem seems to be solved.
    All I did was to click "remove all the warnings" in the Help menu, and remove some older VM files which might have been corrupt.

  • Laptop hard locking

    I've just installed Archlinux on a brand new Dell Latitude E6520
    This laptop has a nvidia quadro nvs 4200m and an intel card. I've disabled optimus in the bios and I'm using the nvidia binary drivers.
    I've had a couple of hard locks, no response at all, I cannot switch to tty1 or anything else. This mostly happens after I've been seeing a flash movie.
    EDIT: some more information. This is in Gnome Shell with Chromium. The problem seems to always occur on closing a tab with a youtube video in it.
    It also seem like it's just the screen that locks (the mouse can be moved) and I could see a torrent updating on my android phone (transdroid - transmission)
    Does anyone have an idea what could be wrong?
    This is the output of dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.2.1-1-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20111223 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Jan 13 06:50:31 CET 2012
    [ 0.000000] Command line: root=/dev/sda6 ro
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000091400 (usable)
    [ 0.000000] BIOS-e820: 0000000000091400 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf225000 (usable)
    [ 0.000000] BIOS-e820: 00000000cf225000 - 00000000cf269000 (reserved)
    [ 0.000000] BIOS-e820: 00000000cf269000 - 00000000cf5b7000 (usable)
    [ 0.000000] BIOS-e820: 00000000cf5b7000 - 00000000cf5e7000 (reserved)
    [ 0.000000] BIOS-e820: 00000000cf5e7000 - 00000000cf7e7000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000cf7e7000 - 00000000cf7ff000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000cf7ff000 - 00000000cf800000 (usable)
    [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffc00000 - 00000000ffc20000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100000000 - 000000022e000000 (usable)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI 2.6 present.
    [ 0.000000] DMI: Dell Inc. Latitude E6520/0J4TFW, BIOS A08 10/18/2011
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x22e000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FC0000000 write-back
    [ 0.000000] 2 base 0C0000000 mask FF0000000 write-back
    [ 0.000000] 3 base 100000000 mask F00000000 write-back
    [ 0.000000] 4 base 200000000 mask FE0000000 write-back
    [ 0.000000] 5 base 220000000 mask FF0000000 write-back
    [ 0.000000] 6 base 22E000000 mask FFE000000 uncachable
    [ 0.000000] 7 base 0FFC00000 mask FFFC00000 write-protect
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] last_pfn = 0xcf800 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [ffff8800000f1a30] f1a30
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff88000008c000] 8c000 size 20480
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000cf800000
    [ 0.000000] 0000000000 - 00cf800000 page 2M
    [ 0.000000] kernel direct mapping tables up to cf800000 @ 1fffb000-20000000
    [ 0.000000] init_memory_mapping: 0000000100000000-000000022e000000
    [ 0.000000] 0100000000 - 022e000000 page 2M
    [ 0.000000] kernel direct mapping tables up to 22e000000 @ cf5ad000-cf5b7000
    [ 0.000000] RAMDISK: 37d7f000 - 37ff0000
    [ 0.000000] ACPI: RSDP 00000000000fe300 00024 (v02 DELL )
    [ 0.000000] ACPI: XSDT 00000000cf7fde18 00084 (v01 DELL CBX3 06222004 MSFT 00010013)
    [ 0.000000] ACPI: FACP 00000000cf787d98 000F4 (v04 DELL CBX3 06222004 MSFT 00010013)
    [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110623/tbfadt-369)
    [ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xCF7E4E40/0x00000000CF7E4D40, using 32 (20110623/tbfadt-489)
    [ 0.000000] ACPI: DSDT 00000000cf755018 08774 (v02 INT430 SYSFexxx 00001001 INTL 20090903)
    [ 0.000000] ACPI: FACS 00000000cf7e4e40 00040
    [ 0.000000] ACPI: APIC 00000000cf7fcf18 000CC (v02 DELL CBX3 06222004 MSFT 00010013)
    [ 0.000000] ACPI: TCPA 00000000cf7e5d18 00032 (v02 00000000 00000000)
    [ 0.000000] ACPI: SSDT 00000000cf788a98 002F9 (v01 DELLTP TPM 00003000 INTL 20090903)
    [ 0.000000] ACPI: MCFG 00000000cf7e5c98 0003C (v01 DELL SNDYBRDG 06222004 MSFT 00000097)
    [ 0.000000] ACPI: HPET 00000000cf7e5c18 00038 (v01 A M I PCHHPET 06222004 AMI. 00000003)
    [ 0.000000] ACPI: BOOT 00000000cf7e5b98 00028 (v01 DELL CBX3 06222004 AMI 00010013)
    [ 0.000000] ACPI: SSDT 00000000cf76c018 00804 (v01 PmRef Cpu0Ist 00003000 INTL 20090903)
    [ 0.000000] ACPI: SSDT 00000000cf76b018 00996 (v01 PmRef CpuPm 00003000 INTL 20090903)
    [ 0.000000] ACPI: DMAR 00000000cf7e4a18 000B0 (v01 INTEL SNB 00000001 INTL 00000001)
    [ 0.000000] ACPI: SLIC 00000000cf775c18 00176 (v03 DELL CBX3 06222004 MSFT 00010013)
    [ 0.000000] ACPI: SSDT 00000000cf773018 014A0 (v01 NvdRef NvdTabl 00001000 INTL 20090903)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-000000022e000000
    [ 0.000000] Initmem setup node 0 0000000000000000-000000022e000000
    [ 0.000000] NODE_DATA [000000022dffb000 - 000000022dffffff]
    [ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880225600000-ffff88022d5fffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x0022e000
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[5] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x00000091
    [ 0.000000] 0: 0x00000100 -> 0x000cf225
    [ 0.000000] 0: 0x000cf269 -> 0x000cf5b7
    [ 0.000000] 0: 0x000cf7ff -> 0x000cf800
    [ 0.000000] 0: 0x00100000 -> 0x0022e000
    [ 0.000000] On node 0 totalpages: 2086133
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 5 pages reserved
    [ 0.000000] DMA zone: 3900 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 16320 pages used for memmap
    [ 0.000000] DMA32 zone: 828852 pages, LIFO batch:31
    [ 0.000000] Normal zone: 19328 pages used for memmap
    [ 0.000000] Normal zone: 1217664 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] SMP: Allowing 16 CPUs, 8 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 0000000000091000 - 0000000000092000
    [ 0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000cf225000 - 00000000cf269000
    [ 0.000000] PM: Registered nosave memory: 00000000cf5b7000 - 00000000cf5e7000
    [ 0.000000] PM: Registered nosave memory: 00000000cf5e7000 - 00000000cf7e7000
    [ 0.000000] PM: Registered nosave memory: 00000000cf7e7000 - 00000000cf7ff000
    [ 0.000000] PM: Registered nosave memory: 00000000cf800000 - 00000000fed1c000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
    [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ffc00000
    [ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000ffc20000
    [ 0.000000] PM: Registered nosave memory: 00000000ffc20000 - 0000000100000000
    [ 0.000000] Allocating PCI resources starting at cf800000 (gap: cf800000:2f51c000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88022dc00000 s82048 r8192 d24448 u131072
    [ 0.000000] pcpu-alloc: s82048 r8192 d24448 u131072 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2050416
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: root=/dev/sda6 ro
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 8131928k/9142272k available (4279k kernel code, 797740k absent, 212604k reserved, 4601k data, 728k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:4352 nr_irqs:808 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 67108864 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.003333] Detected 2395.118 MHz processor.
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4792.82 BogoMIPS (lpj=7983726)
    [ 0.000006] pid_max: default: 32768 minimum: 301
    [ 0.000030] Security Framework initialized
    [ 0.000034] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000695] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.002396] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.003076] Mount-cache hash table entries: 256
    [ 0.003181] Initializing cgroup subsys cpuacct
    [ 0.003186] Initializing cgroup subsys memory
    [ 0.003192] Initializing cgroup subsys devices
    [ 0.003194] Initializing cgroup subsys freezer
    [ 0.003195] Initializing cgroup subsys net_cls
    [ 0.003197] Initializing cgroup subsys blkio
    [ 0.003225] CPU: Physical Processor ID: 0
    [ 0.003226] CPU: Processor Core ID: 0
    [ 0.003230] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    [ 0.003231] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.003234] mce: CPU supports 9 MCE banks
    [ 0.003247] CPU0: Thermal monitoring enabled (TM1)
    [ 0.003256] using mwait in idle threads.
    [ 0.004417] ACPI: Core revision 20110623
    [ 0.010455] ftrace: allocating 16773 entries in 66 pages
    [ 0.016524] DMAR: Host address width 36
    [ 0.016526] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
    [ 0.016534] IOMMU 0: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
    [ 0.016536] DMAR: RMRR base: 0x000000cf5c6000 end: 0x000000cf5d5fff
    [ 0.016607] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 0
    [ 0.016608] HPET id 0 under DRHD base 0xfed91000
    [ 0.016609] HPET id 0 under DRHD base 0xfed91000
    [ 0.016610] HPET id 0 under DRHD base 0xfed91000
    [ 0.016611] HPET id 0 under DRHD base 0xfed91000
    [ 0.016612] HPET id 0 under DRHD base 0xfed91000
    [ 0.016614] HPET id 0 under DRHD base 0xfed91000
    [ 0.016615] HPET id 0 under DRHD base 0xfed91000
    [ 0.016616] HPET id 0 under DRHD base 0xfed91000
    [ 0.016704] Enabled IRQ remapping in x2apic mode
    [ 0.016705] Enabling x2apic
    [ 0.016706] Enabled x2apic
    [ 0.016711] Switched APIC routing to cluster x2apic.
    [ 0.017136] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.050099] CPU0: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz stepping 07
    [ 0.154389] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
    [ 0.154394] PEBS disabled due to CPU errata.
    [ 0.154396] ... version: 3
    [ 0.154397] ... bit width: 48
    [ 0.154398] ... generic registers: 4
    [ 0.154399] ... value mask: 0000ffffffffffff
    [ 0.154401] ... max period: 000000007fffffff
    [ 0.154402] ... fixed-purpose events: 3
    [ 0.154403] ... event mask: 000000070000000f
    [ 0.174525] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.201013] Booting Node 0, Processors #1
    [ 0.201020] smpboot cpu 1: start_ip = 8c000
    [ 0.314305] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.334169] #2
    [ 0.334172] smpboot cpu 2: start_ip = 8c000
    [ 0.447449] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.467295] #3
    [ 0.467298] smpboot cpu 3: start_ip = 8c000
    [ 0.580576] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.600430] #4
    [ 0.600433] smpboot cpu 4: start_ip = 8c000
    [ 0.713670] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.733570] #5
    [ 0.733574] smpboot cpu 5: start_ip = 8c000
    [ 0.846855] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.866707] #6
    [ 0.866710] smpboot cpu 6: start_ip = 8c000
    [ 0.979989] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.999833] #7
    [ 0.999837] smpboot cpu 7: start_ip = 8c000
    [ 1.113508] NMI watchdog enabled, takes one hw-pmu counter.
    [ 1.119625] Brought up 8 CPUs
    [ 1.119631] Total of 8 processors activated (38369.65 BogoMIPS).
    [ 1.126941] devtmpfs: initialized
    [ 1.127773] PM: Registering ACPI NVS region at cf5e7000 (2097152 bytes)
    [ 1.128489] print_constraints: dummy:
    [ 1.128525] NET: Registered protocol family 16
    [ 1.128610] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 1.128612] ACPI: bus type pci registered
    [ 1.128680] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 1.128683] PCI: not using MMCONFIG
    [ 1.128684] PCI: Using configuration type 1 for base access
    [ 1.128692] dmi type 0xB1 record - unknown flag
    [ 1.129167] bio: create slab <bio-0> at 0
    [ 1.129214] ACPI: Added _OSI(Module Device)
    [ 1.129215] ACPI: Added _OSI(Processor Device)
    [ 1.129217] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 1.129219] ACPI: Added _OSI(Processor Aggregator Device)
    [ 1.130580] ACPI: EC: Look up EC in DSDT
    [ 1.134328] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 1.209853] ACPI: SSDT 00000000cf5d7798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903)
    [ 1.210224] ACPI: Dynamic OEM Table Load:
    [ 1.210227] ACPI: SSDT (null) 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903)
    [ 1.219718] ACPI: SSDT 00000000cf5d8a98 00303 (v01 PmRef ApIst 00003000 INTL 20090903)
    [ 1.220112] ACPI: Dynamic OEM Table Load:
    [ 1.220114] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20090903)
    [ 1.229586] ACPI: SSDT 00000000cf5d6d98 00119 (v01 PmRef ApCst 00003000 INTL 20090903)
    [ 1.229951] ACPI: Dynamic OEM Table Load:
    [ 1.229953] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20090903)
    [ 1.299445] ACPI: Interpreter enabled
    [ 1.299447] ACPI: (supports S0 S3 S4 S5)
    [ 1.299468] ACPI: Using IOAPIC for interrupt routing
    [ 1.299484] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 1.299835] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
    [ 1.905755] ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930
    [ 1.948489] ACPI: No dock devices found.
    [ 1.948491] HEST: Table not found.
    [ 1.948494] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 1.948762] \_SB_.PCI0:_OSC invalid UUID
    [ 1.948764] _OSC request data:1 8 1f
    [ 1.948767] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 1.949244] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 1.949246] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 1.949248] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 1.949251] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xfeafffff]
    [ 1.949253] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
    [ 1.949263] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
    [ 1.949296] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
    [ 1.949320] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 1.949322] pci 0000:00:01.0: PME# disabled
    [ 1.949366] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
    [ 1.949390] pci 0000:00:16.0: reg 10: [mem 0xe67b0000-0xe67b000f 64bit]
    [ 1.949453] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 1.949458] pci 0000:00:16.0: PME# disabled
    [ 1.949487] pci 0000:00:19.0: [8086:1502] type 0 class 0x000200
    [ 1.949505] pci 0000:00:19.0: reg 10: [mem 0xe6700000-0xe671ffff]
    [ 1.949514] pci 0000:00:19.0: reg 14: [mem 0xe6780000-0xe6780fff]
    [ 1.949524] pci 0000:00:19.0: reg 18: [io 0x5040-0x505f]
    [ 1.949574] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    [ 1.949578] pci 0000:00:19.0: PME# disabled
    [ 1.949602] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
    [ 1.949623] pci 0000:00:1a.0: reg 10: [mem 0xe6770000-0xe67703ff]
    [ 1.949696] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 1.949701] pci 0000:00:1a.0: PME# disabled
    [ 1.949724] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
    [ 1.949739] pci 0000:00:1b.0: reg 10: [mem 0xe6760000-0xe6763fff 64bit]
    [ 1.949794] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 1.949798] pci 0000:00:1b.0: PME# disabled
    [ 1.949823] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
    [ 1.949920] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 1.949926] pci 0000:00:1c.0: PME# disabled
    [ 1.949961] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
    [ 1.950061] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 1.950066] pci 0000:00:1c.1: PME# disabled
    [ 1.950101] pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604
    [ 1.950201] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 1.950206] pci 0000:00:1c.2: PME# disabled
    [ 1.950241] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
    [ 1.950339] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 1.950344] pci 0000:00:1c.3: PME# disabled
    [ 1.950376] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604
    [ 1.950442] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 1.950446] pci 0000:00:1c.5: PME# disabled
    [ 1.950477] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
    [ 1.950498] pci 0000:00:1d.0: reg 10: [mem 0xe6750000-0xe67503ff]
    [ 1.950571] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 1.950576] pci 0000:00:1d.0: PME# disabled
    [ 1.950601] pci 0000:00:1f.0: [8086:1c4f] type 0 class 0x000601
    [ 1.950715] pci 0000:00:1f.2: [8086:282a] type 0 class 0x000104
    [ 1.950734] pci 0000:00:1f.2: reg 10: [io 0x5090-0x5097]
    [ 1.950742] pci 0000:00:1f.2: reg 14: [io 0x5080-0x5083]
    [ 1.950750] pci 0000:00:1f.2: reg 18: [io 0x5070-0x5077]
    [ 1.950758] pci 0000:00:1f.2: reg 1c: [io 0x5060-0x5063]
    [ 1.950767] pci 0000:00:1f.2: reg 20: [io 0x5020-0x503f]
    [ 1.950775] pci 0000:00:1f.2: reg 24: [mem 0xe6740000-0xe67407ff]
    [ 1.950807] pci 0000:00:1f.2: PME# supported from D3hot
    [ 1.950811] pci 0000:00:1f.2: PME# disabled
    [ 1.950829] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
    [ 1.950844] pci 0000:00:1f.3: reg 10: [mem 0xe6730000-0xe67300ff 64bit]
    [ 1.950866] pci 0000:00:1f.3: reg 20: [io 0x5000-0x501f]
    [ 1.950922] pci 0000:01:00.0: [10de:1056] type 0 class 0x000300
    [ 1.950930] pci 0000:01:00.0: reg 10: [mem 0xe4000000-0xe4ffffff]
    [ 1.950939] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 1.950948] pci 0000:01:00.0: reg 1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
    [ 1.950954] pci 0000:01:00.0: reg 24: [io 0x4000-0x407f]
    [ 1.950960] pci 0000:01:00.0: reg 30: [mem 0xe5000000-0xe507ffff pref]
    [ 1.950995] pci 0000:01:00.1: [10de:0e08] type 0 class 0x000403
    [ 1.951003] pci 0000:01:00.1: reg 10: [mem 0xe5080000-0xe5083fff]
    [ 1.951059] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 1.951061] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
    [ 1.951064] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe50fffff]
    [ 1.951067] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
    [ 1.951136] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 1.951381] pci 0000:03:00.0: [8086:0082] type 0 class 0x000280
    [ 1.951530] pci 0000:03:00.0: reg 10: [mem 0xe6600000-0xe6601fff 64bit]
    [ 1.952110] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
    [ 1.952145] pci 0000:03:00.0: PME# disabled
    [ 1.952317] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 1.952323] pci 0000:00:1c.1: bridge window [mem 0xe6600000-0xe66fffff]
    [ 1.952373] pci 0000:00:1c.2: PCI bridge to [bus 04-09]
    [ 1.952377] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
    [ 1.952381] pci 0000:00:1c.2: bridge window [mem 0xe5b00000-0xe64fffff]
    [ 1.952388] pci 0000:00:1c.2: bridge window [mem 0xe2b00000-0xe34fffff 64bit pref]
    [ 1.952433] pci 0000:00:1c.3: PCI bridge to [bus 0a-0a]
    [ 1.952437] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
    [ 1.952442] pci 0000:00:1c.3: bridge window [mem 0xe5100000-0xe5afffff]
    [ 1.952448] pci 0000:00:1c.3: bridge window [mem 0xe2100000-0xe2afffff 64bit pref]
    [ 1.952536] pci 0000:0b:00.0: [1217:13f7] type 0 class 0x000c00
    [ 1.952570] pci 0000:0b:00.0: reg 10: [mem 0xe6530000-0xe6530fff]
    [ 1.952769] pci 0000:0b:00.0: supports D1 D2
    [ 1.952771] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.952779] pci 0000:0b:00.0: PME# disabled
    [ 1.952855] pci 0000:0b:00.1: [1217:8321] type 0 class 0x000805
    [ 1.952889] pci 0000:0b:00.1: reg 10: [mem 0xe6520000-0xe65201ff]
    [ 1.953089] pci 0000:0b:00.1: supports D1 D2
    [ 1.953091] pci 0000:0b:00.1: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.953099] pci 0000:0b:00.1: PME# disabled
    [ 1.953169] pci 0000:0b:00.2: [1217:8331] type 0 class 0x000180
    [ 1.953202] pci 0000:0b:00.2: reg 10: [mem 0xe6510000-0xe65103ff]
    [ 1.953246] pci 0000:0b:00.2: reg 18: [mem 0xe6500000-0xe65003ff]
    [ 1.953404] pci 0000:0b:00.2: supports D1 D2
    [ 1.953406] pci 0000:0b:00.2: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.953414] pci 0000:0b:00.2: PME# disabled
    [ 1.953509] pci 0000:00:1c.5: PCI bridge to [bus 0b-0b]
    [ 1.953516] pci 0000:00:1c.5: bridge window [mem 0xe6500000-0xe65fffff]
    [ 1.953548] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 1.953660] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 1.953687] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [ 1.953712] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
    [ 1.953739] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
    [ 1.953767] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
    [ 1.953801] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
    [ 1.953863] \_SB_.PCI0:_OSC invalid UUID
    [ 1.953864] _OSC request data:1 1f 1f
    [ 1.953868] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 1.953893] \_SB_.PCI0:_OSC invalid UUID
    [ 1.953895] _OSC request data:1 0 1d
    [ 1.953898] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
    [ 1.953899] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 1.956866] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 1.956905] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 1.956942] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 1.956977] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 1.957013] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15)
    [ 1.957050] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 1.957086] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
    [ 1.957123] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 1.957205] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 1.957208] vgaarb: loaded
    [ 1.957209] vgaarb: bridge control possible 0000:01:00.0
    [ 1.957258] PCI: Using ACPI for IRQ routing
    [ 1.958763] PCI: pci_cache_line_size set to 64 bytes
    [ 1.958852] reserve RAM buffer: 0000000000091400 - 000000000009ffff
    [ 1.958854] reserve RAM buffer: 00000000cf225000 - 00000000cfffffff
    [ 1.958856] reserve RAM buffer: 00000000cf5b7000 - 00000000cfffffff
    [ 1.958858] reserve RAM buffer: 00000000cf800000 - 00000000cfffffff
    [ 1.958860] reserve RAM buffer: 000000022e000000 - 000000022fffffff
    [ 1.958938] NetLabel: Initializing
    [ 1.958939] NetLabel: domain hash size = 128
    [ 1.958940] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.958952] NetLabel: unlabeled traffic allowed by default
    [ 1.958967] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 1.958972] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 1.961986] Switching to clocksource hpet
    [ 1.966608] pnp: PnP ACPI init
    [ 1.966621] ACPI: bus type pnp registered
    [ 1.966883] pnp 00:00: [bus 00-3e]
    [ 1.966885] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 1.966887] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 1.966889] pnp 00:00: [io 0x0d00-0xffff window]
    [ 1.966891] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 1.966893] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 1.966894] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 1.966896] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 1.966898] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 1.966899] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 1.966901] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 1.966903] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 1.966905] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 1.966906] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 1.966908] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 1.966910] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 1.966911] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 1.966913] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 1.966915] pnp 00:00: [mem 0xd0000000-0xfeafffff window]
    [ 1.966917] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
    [ 1.966968] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 1.966982] pnp 00:01: [io 0x0000-0x001f]
    [ 1.966984] pnp 00:01: [io 0x0081-0x0091]
    [ 1.966985] pnp 00:01: [io 0x0093-0x009f]
    [ 1.966987] pnp 00:01: [io 0x00c0-0x00df]
    [ 1.966988] pnp 00:01: [dma 4]
    [ 1.967007] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 1.967014] pnp 00:02: [mem 0xff000000-0xffffffff]
    [ 1.967032] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
    [ 1.967094] pnp 00:03: [mem 0xfed00000-0xfed003ff]
    [ 1.967127] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
    [ 1.967130] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
    [ 1.967138] pnp 00:04: [io 0x00f0]
    [ 1.967149] pnp 00:04: [irq 13]
    [ 1.967168] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 1.967176] pnp 00:05: [io 0x002e-0x002f]
    [ 1.967178] pnp 00:05: [io 0x004e-0x004f]
    [ 1.967179] pnp 00:05: [io 0x0061]
    [ 1.967180] pnp 00:05: [io 0x0063]
    [ 1.967182] pnp 00:05: [io 0x0065]
    [ 1.967183] pnp 00:05: [io 0x0067]
    [ 1.967184] pnp 00:05: [io 0x0070]
    [ 1.967186] pnp 00:05: [io 0x0080]
    [ 1.967187] pnp 00:05: [io 0x0092]
    [ 1.967188] pnp 00:05: [io 0x00b2-0x00b3]
    [ 1.967190] pnp 00:05: [io 0x0680-0x069f]
    [ 1.967191] pnp 00:05: [io 0x1000-0x100f]
    [ 1.967193] pnp 00:05: [io 0xffff]
    [ 1.967194] pnp 00:05: [io 0xffff]
    [ 1.967195] pnp 00:05: [io 0x0400-0x047f]
    [ 1.967197] pnp 00:05: [io 0x0500-0x057f]
    [ 1.967198] pnp 00:05: [io 0x164e-0x164f]
    [ 1.967233] system 00:05: [io 0x0680-0x069f] has been reserved
    [ 1.967235] system 00:05: [io 0x1000-0x100f] has been reserved
    [ 1.967237] system 00:05: [io 0xffff] has been reserved
    [ 1.967239] system 00:05: [io 0xffff] has been reserved
    [ 1.967241] system 00:05: [io 0x0400-0x047f] has been reserved
    [ 1.967243] system 00:05: [io 0x0500-0x057f] has been reserved
    [ 1.967245] system 00:05: [io 0x164e-0x164f] has been reserved
    [ 1.967248] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.967254] pnp 00:06: [io 0x0070-0x0077]
    [ 1.967260] pnp 00:06: [irq 8]
    [ 1.967280] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 1.967287] pnp 00:07: [io 0x0060]
    [ 1.967289] pnp 00:07: [io 0x0064]
    [ 1.967295] pnp 00:07: [irq 1]
    [ 1.967313] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 2.261804] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (disabled)
    [ 2.261817] pnp 00:09: [irq 12]
    [ 2.261839] pnp 00:09: Plug and Play ACPI device, IDs DLL0494 PNP0f13 (active)
    [ 2.261970] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
    [ 2.261972] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
    [ 2.261974] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
    [ 2.261975] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
    [ 2.261977] pnp 00:0a: [mem 0xf8000000-0xfbffffff]
    [ 2.261978] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
    [ 2.261980] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
    [ 2.261981] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
    [ 2.261983] pnp 00:0a: [mem 0xff000000-0xffffffff]
    [ 2.261984] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
    [ 2.261986] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
    [ 2.261988] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
    [ 2.262035] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 2.262038] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 2.262040] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 2.262042] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 2.262044] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 2.262046] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 2.262048] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 2.262050] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 2.262052] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
    [ 2.262055] system 00:0a: [mem 0xfee00000-0xfeefffff] has been reserved
    [ 2.262057] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 2.368290] pnp 00:0b: [irq 23]
    [ 2.368321] pnp 00:0b: Plug and Play ACPI device, IDs SMO8800 (active)
    [ 2.901044] pnp 00:0c: can't evaluate _CRS: 12311
    [ 2.901163] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 2.901224] pnp: PnP ACPI: found 13 devices
    [ 2.901225] ACPI: ACPI bus type pnp unregistered
    [ 2.907642] PCI: max bus depth: 1 pci_try_num: 2
    [ 2.907686] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 2.907689] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
    [ 2.907692] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe50fffff]
    [ 2.907695] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
    [ 2.907698] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 2.907710] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 2.907715] pci 0000:00:1c.1: bridge window [mem 0xe6600000-0xe66fffff]
    [ 2.907723] pci 0000:00:1c.2: PCI bridge to [bus 04-09]
    [ 2.907727] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
    [ 2.907732] pci 0000:00:1c.2: bridge window [mem 0xe5b00000-0xe64fffff]
    [ 2.907737] pci 0000:00:1c.2: bridge window [mem 0xe2b00000-0xe34fffff 64bit pref]
    [ 2.907743] pci 0000:00:1c.3: PCI bridge to [bus 0a-0a]
    [ 2.907746] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
    [ 2.907752] pci 0000:00:1c.3: bridge window [mem 0xe5100000-0xe5afffff]
    [ 2.907756] pci 0000:00:1c.3: bridge window [mem 0xe2100000-0xe2afffff 64bit pref]
    [ 2.907763] pci 0000:00:1c.5: PCI bridge to [bus 0b-0b]
    [ 2.907768] pci 0000:00:1c.5: bridge window [mem 0xe6500000-0xe65fffff]
    [ 2.907788] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 2.907791] pci 0000:00:01.0: setting latency timer to 64
    [ 2.907798] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 2.907802] pci 0000:00:1c.0: setting latency timer to 64
    [ 2.907813] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 2.907817] pci 0000:00:1c.1: setting latency timer to 64
    [ 2.907828] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 2.907833] pci 0000:00:1c.2: setting latency timer to 64
    [ 2.907844] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [ 2.907848] pci 0000:00:1c.3: setting latency timer to 64
    [ 2.907855] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 2.907859] pci 0000:00:1c.5: setting latency timer to 64
    [ 2.907863] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 2.907865] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 2.907867] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 2.907869] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfeafffff]
    [ 2.907871] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
    [ 2.907873] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
    [ 2.907875] pci_bus 0000:01: resource 1 [mem 0xe4000000-0xe50fffff]
    [ 2.907876] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref]
    [ 2.907879] pci_bus 0000:03: resource 1 [mem 0xe6600000-0xe66fffff]
    [ 2.907881] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
    [ 2.907882] pci_bus 0000:04: resource 1 [mem 0xe5b00000-0xe64fffff]
    [ 2.907884] pci_bus 0000:04: resource 2 [mem 0xe2b00000-0xe34fffff 64bit pref]
    [ 2.907886] pci_bus 0000:0a: resource 0 [io 0x2000-0x2fff]
    [ 2.907888] pci_bus 0000:0a: resource 1 [mem 0xe5100000-0xe5afffff]
    [ 2.907890] pci_bus 0000:0a: resource 2 [mem 0xe2100000-0xe2afffff 64bit pref]
    [ 2.907892] pci_bus 0000:0b: resource 1 [mem 0xe6500000-0xe65fffff]
    [ 2.907916] NET: Registered protocol family 2
    [ 2.908115] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 2.908943] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 2.910176] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 2.910301] TCP: Hash tables configured (established 524288 bind 65536)
    [ 2.910303] TCP reno registered
    [ 2.910320] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 2.910353] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 2.910446] NET: Registered protocol family 1
    [ 2.910559] pci 0000:01:00.0: Boot video device
    [ 2.910582] PCI: CLS 64 bytes, default 64
    [ 2.910623] Unpacking initramfs...
    [ 2.941993] Freeing initrd memory: 2500k freed
    [ 2.942232] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 2.942234] Placing 64MB software IO TLB between ffff8800cb225000 - ffff8800cf225000
    [ 2.942236] software IO TLB at phys 0xcb225000 - 0xcf225000
    [ 2.942252] Simple Boot Flag at 0xf3 set to 0x1
    [ 2.942809] audit: initializing netlink socket (disabled)
    [ 2.942818] type=2000 audit(1327170869.719:1): initialized
    [ 2.952233] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 2.971773] VFS: Disk quotas dquot_6.5.2
    [ 2.971823] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 2.971901] msgmni has been set to 15887
    [ 2.972033] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 2.972054] io scheduler noop registered
    [ 2.972055] io scheduler deadline registered
    [ 2.972083] io scheduler cfq registered (default)
    [ 2.972164] pcieport 0000:00:01.0: setting latency timer to 64
    [ 2.972192] pcieport 0000:00:01.0: irq 41 for MSI/MSI-X
    [ 2.972515] intel_idle: MWAIT substates: 0x21120
    [ 2.972517] intel_idle: v0.4 model 0x2A
    [ 2.972518] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 2.972569] ERST: Table is not found!
    [ 2.972570] GHES: HEST is not enabled!
    [ 2.972615] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 3.223771] Linux agpgart interface v0.103
    [ 3.223852] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 3.224055] i8042: Warning: Keylock active
    [ 3.225294] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 3.225305] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 3.225409] mousedev: PS/2 mouse device common for all mice
    [ 3.225438] rtc_cmos 00:06: RTC can wake from S4
    [ 3.225568] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    [ 3.225598] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
    [ 3.225805] cpuidle: using governor ladder
    [ 3.226119] cpuidle: using governor menu
    [ 3.226278] TCP cubic registered
    [ 3.226280] NET: Registered protocol family 17
    [ 3.226287] Registering the dns_resolver key type
    [ 3.226330] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 3.226399] PM: Hibernation image not present or could not be loaded.
    [ 3.226403] registered taskstats version 1
    [ 3.330608] rtc_cmos 00:06: setting system clock to 2012-01-21 18:34:30 UTC (1327170870)
    [ 3.330648] Initializing network drop monitor service
    [ 3.331805] Freeing unused kernel memory: 728k freed
    [ 3.331879] Write protecting the kernel read-only data: 8192k
    [ 3.336886] Freeing unused kernel memory: 1848k freed
    [ 3.338985] Freeing unused kernel memory: 696k freed
    [ 3.346637] udevd[62]: starting version 175
    [ 3.373920] usbcore: registered new interface driver usbfs
    [ 3.373946] usbcore: registered new interface driver hub
    [ 3.373985] usbcore: registered new device driver usb
    [ 3.374685] SCSI subsystem initialized
    [ 3.374842] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 3.374865] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 3.374895] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 3.374899] ehci_hcd 0000:00:1a.0: EHCI Host Controller
    [ 3.374921] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 3.374947] ehci_hcd 0000:00:1a.0: debug port 2
    [ 3.378261] libata version 3.00 loaded.
    [ 3.378830] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
    [ 3.378848] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xe6770000
    [ 3.390100] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 3.390262] hub 1-0:1.0: USB hub found
    [ 3.390266] hub 1-0:1.0: 2 ports detected
    [ 3.390336] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 3.390415] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 3.390418] ehci_hcd 0000:00:1d.0: EHCI Host Controller
    [ 3.390426] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 3.390451] ehci_hcd 0000:00:1d.0: debug port 2
    [ 3.394340] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
    [ 3.394356] ehci_hcd 0000:00:1d.0: irq 17, io mem 0xe6750000
    [ 3.406750] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 3.406906] hub 2-0:1.0: USB hub found
    [ 3.406910] hub 2-0:1.0: 2 ports detected
    [ 3.407025] ahci 0000:00:1f.2: version 3.0
    [ 3.407039] ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 3.407125] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
    [ 3.407153] ahci: SSS flag set, parallel bus scan disabled
    [ 3.420086] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl RAID mode
    [ 3.420090] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
    [ 3.420096] ahci 0000:00:1f.2: setting latency timer to 64
    [ 3.447308] scsi0 : ahci
    [ 3.447476] scsi1 : ahci
    [ 3.447634] scsi2 : ahci
    [ 3.447824] scsi3 : ahci
    [ 3.447980] scsi4 : ahci
    [ 3.448128] scsi5 : ahci
    [ 3.696308] usb 1-1: new high-speed USB device number 2 using ehci_hcd
    [ 3.820574] hub 1-1:1.0: USB hub found
    [ 3.820741] hub 1-1:1.0: 6 ports detected
    [ 3.925982] usb 2-1: new high-speed USB device number 2 using ehci_hcd
    [ 3.942601] Refined TSC clocksource calibration: 2394.560 MHz.
    [ 3.942607] Switching to clocksource tsc
    [ 4.049970] hub 2-1:1.0: USB hub found
    [ 4.050017] hub 2-1:1.0: 8 ports detected
    [ 4.115834] ata1: SATA max UDMA/133 abar m2048@0xe6740000 port 0xe6740100 irq 42
    [ 4.115839] ata2: SATA max UDMA/133 abar m2048@0xe6740000 port 0xe6740180 irq 42
    [ 4.115841] ata3: DUMMY
    [ 4.115844] ata4: SATA max UDMA/133 abar m2048@0xe6740000 port 0xe6740280 irq 42
    [ 4.115848] ata5: SATA max UDMA/133 abar m2048@0xe6740000 port 0xe6740300 irq 42
    [ 4.115851] ata6: SATA max UDMA/133 abar m2048@0xe6740000 port 0xe6740380 irq 42
    [ 4.315609] usb 2-1.3: new full-speed USB device number 3 using ehci_hcd
    [ 4.430812] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input1
    [ 4.430911] generic-usb 0003:046D:C526.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.3/input0
    [ 4.433014] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input2
    [ 4.433285] generic-usb 0003:046D:C526.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.3/input1
    [ 4.433299] usbcore: registered new interface driver usbhid
    [ 4.433300] usbhid: USB HID core driver
    [ 4.435196] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 4.468605] usb 2-1.8: new full-speed USB device number 4 using ehci_hcd
    [ 4.578165] usb 2-1.8: config 0 descriptor??
    [ 4.731814] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
    [ 4.757591] ata1.00: ATA-8: ST320LT020-9YG142, 0003DEM1, max UDMA/133
    [ 4.757594] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
    [ 5.031427] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
    [ 5.031862] ata1.00: configured for UDMA/133
    [ 5.037876] scsi 0:0:0:0: Direct-Access ATA ST320LT020-9YG14 0003 PQ: 0 ANSI: 5
    [ 5.357163] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 5.359389] ata2.00: ATAPI: MATSHITA DVD+/-RW UJ8B2, 1.01, max UDMA/100
    [ 5.361668] ata2.00: configured for UDMA/100
    [ 5.363879] scsi 1:0:0:0: CD-ROM MATSHITA DVD+-RW UJ8B2 1.01 PQ: 0 ANSI: 5
    [ 5.683344] ata4: SATA link down (SStatus 0 SControl 300)
    [ 6.002867] ata5: SATA link down (SStatus 0 SControl 300)
    [ 6.322394] ata6: SATA link down (SStatus 0 SControl 300)
    [ 6.327719] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    [ 6.327723] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [ 6.327800] sd 0:0:0:0: [sda] Write Protect is off
    [ 6.327804] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 6.327834] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 6.329859] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 6.329868] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 6.330052] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 6.449243] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
    [ 6.450747] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 7.338185] EXT4-fs (sda6): INFO: recovery required on readonly filesystem
    [ 7.338188] EXT4-fs (sda6): write access will be enabled during recovery
    [ 10.955863] EXT4-fs (sda6): orphan cleanup on readonly fs
    [ 10.955871] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523699
    [ 10.955918] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523418
    [ 10.955931] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523574
    [ 10.955944] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523423
    [ 10.955953] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523421
    [ 10.955962] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523419
    [ 10.955971] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523417
    [ 10.955980] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523237
    [ 10.955992] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523255
    [ 10.956001] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523254
    [ 10.956011] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523241
    [ 10.956020] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523238
    [ 10.956029] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523236
    [ 10.956038] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523178
    [ 10.956047] EXT4-fs (sda6): 14 orphan inodes deleted
    [ 10.956049] EXT4-fs (sda6): recovery complete
    [ 13.645965] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
    [ 15.112195] udevd[252]: starting version 177
    [ 15.469613] input: PC Speaker as /devices/platform/pcspkr/input/input3
    [ 15.498519] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
    [ 15.498521] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
    [ 15.498553] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [ 15.498564] e1000e 0000:00:19.0: setting latency timer to 64
    [ 15.498704] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
    [ 15.504929] wmi: Mapper loaded
    [ 15.520894] iTCO_vendor_support: vendor-support=0
    [ 15.543541] mei: module is from the staging directory, the quality is unknown, you have been warned.
    [ 15.579114] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
    [ 15.579433] ACPI: Lid Switch [LID]
    [ 15.579495] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
    [ 15.579499] ACPI: Power Button [PBTN]
    [ 15.579557] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6
    [ 15.579560] ACPI: Sleep Button [SBTN]
    [ 15.579617] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
    [ 15.579620] ACPI: Power Button [PWRF]
    [ 15.643123] Disabling lock debugging due to kernel taint
    [ 15.707133] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    [ 15.707236] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
    [ 15.707306] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 15.799015] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) d4:be:d9:12:a3:70
    [ 15.799019] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
    [ 15.799068] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 4041FF-0FF
    [ 15.799125] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 15.799134] mei 0000:00:16.0: setting latency timer to 64
    [ 15.799203] mei 0000:00:16.0: irq 44 for MSI/MSI-X
    [ 15.812872] watchdog: INTCAMT: cannot register miscdev on minor=130 (err=-16).
    [ 15.813000] watchdog: error registering /dev/watchdog (err=-16).
    [ 15.813086] mei: unable to register watchdog device.
    [ 15.851527] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 15.874775] nvidia: module license 'NVIDIA' taints kernel.
    [ 15.928355] nvidia 0000:01:00.0: power state changed by ACPI to D0
    [ 15.928363] nvidia 0000:01:00.0: power state changed by ACPI to D0
    [ 15.928371] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 15.928378] nvidia 0000:01:00.0: setting latency timer to 64
    [ 15.928382] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [ 15.928579] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 290.10 Wed Nov 16 17:39:29 PST 2011
    [ 15.952161] alps.c: Enabled hardware quirk, falling back to psmouse-core
    [ 15.965757] input: ImPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input8
    [ 16.460764] thermal LNXTHERM:00: registered as thermal_zone0
    [ 16.460767] ACPI: Thermal Zone [THM] (25 C)
    [ 16.993137] ACPI: Battery Slot [BAT0] (battery present)
    [ 17.516214] ACPI: Battery Slot [BAT1] (battery absent)
    [ 17.628974] acpi device:16: registered as cooling_device8
    [ 17.885641] ACPI: Battery Slot [BAT2] (battery absent)
    [ 17.905918] ACPI: AC Adapter [AC] (off-line)
    [ 17.906649] parport_pc 00:08: [io 0x0378-0x037b]
    [ 17.906712] parport_pc 00:08: [irq 5]
    [ 17.908312] input: Dell WMI hotkeys as /devices/virtual/input/input9
    [ 17.911829] sdhci: Secure Digital Host Controller Interface driver
    [ 17.911831] sdhci: Copyright(c) Pierre Ossman
    [ 17.914318] sdhci-pci 0000:0b:00.1: SDHCI controller found [1217:8321] (rev 5)
    [ 17.914335] sdhci-pci 0000:0b:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
    [ 17.914367] sdhci-pci 0000:0b:00.1: Invalid iomem size. You may experience problems.
    [ 17.914511] sdhci-pci 0000:0b:00.1: setting latency timer to 64
    [ 17.914529] _regulator_get: 0000:0b:00.1 supply vmmc not found, using dummy regulator
    [ 17.914568] Registered led device: mmc0::
    [ 17.915610] mmc0: SDHCI controller on PCI [0000:0b:00.1] using DMA
    [ 17.955391] firewire_ohci 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 17.955400] firewire_ohci 0000:0b:00.0: setting latency timer to 64
    [ 17.955433] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [ 17.955505] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
    [ 17.955527] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
    [ 17.955748] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:13/LNXVIDEO:00/input/input10
    [ 17.955806] ACPI: Video Device [VID] (multi-head: yes rom: yes post: no)
    [ 17.967345] cfg80211: Calling CRDA to update world regulatory domain
    [ 17.972266] ppdev: user-space parallel port driver
    [ 18.008312] firewire_ohci: Added fw-ohci device 0000:0b:00.0, OHCI v1.10, 8 IR + 8 IT contexts, quirks 0x10
    [ 18.020285] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
    [ 18.020288] Copyright(c) 2003-2011 Intel Corporation
    [ 18.021643] iwlwifi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 18.021654] iwlwifi 0000:03:00.0: setting latency timer to 64
    [ 18.021753] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
    [ 18.021755] iwlwifi 0000:03:00.0: pci_resource_base = ffffc900057f4000
    [ 18.021757] iwlwifi 0000:03:00.0: HW Revision ID = 0x34
    [ 18.021914] iwlwifi 0000:03:00.0: irq 46 for MSI/MSI-X
    [ 18.021951] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
    [ 18.022002] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
    [ 18.027654] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
    [ 18.036450] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
    [ 18.036579] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
    [ 18.036701] input: HDA Intel PCH Line-out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
    [ 18.036773] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
    [ 18.037021] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 18.037023] hda_intel: Disabling MSI
    [ 18.037097] snd_hda_intel 0000:01:00.1: setting latency timer to 64
    [ 18.039318] iwlwifi 0000:03:00.0: device EEPROM VER=0x715, CALIB=0x6
    [ 18.039321] iwlwifi 0000:03:00.0: Device SKU: 0X1f0
    [ 18.039322] iwlwifi 0000:03:00.0: Valid Tx ant: 0X3, Valid Rx ant: 0X3
    [ 18.039336] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
    [ 18.061668] iwlwifi 0000:03:00.0: loaded firmware version 17.168.5.3 build 42301
    [ 18.061790] Registered led device: phy0-led
    [ 18.080373] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 18.394490] parport_pc 00:08: activated
    [ 18.394496] parport_pc 00:08: reported by Plug and Play ACPI
    [ 18.394576] parport_pc 00:08: disabled
    [ 18.404379] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
    [ 18.431005] HDMI status: Codec=0 Pin=6 Presence_Detect=0 ELD_Valid=0
    [ 18.457641] HDMI status: Codec=0 Pin=7 Presence_Detect=0 ELD_Valid=0
    [ 18.471036] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
    [ 18.471194] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
    [ 18.471371] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
    [ 18.507770] firewire_core: created device fw0: GUID 00cc9ae1394fc000, S400
    [ 31.817983] EXT4-fs (sda6): re-mounted. Opts: (null)
    [ 31.964978] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
    [ 35.242765] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
    [ 35.295945] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
    [ 35.328281] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
    [ 35.335000] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
    [ 35.622269] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
    [ 35.629014] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
    [ 43.022366] wlan0: authenticate with 5c:33:8e:1b:88:9d (try 1)
    [ 43.024202] wlan0: authenticated
    [ 43.024437] wlan0: associate with 5c:33:8e:1b:88:9d (try 1)
    [ 43.027595] wlan0: RX AssocResp from 5c:33:8e:1b:88:9d (capab=0x431 status=0 aid=1)
    [ 43.027598] wlan0: associated
    [ 47.106109] EXT4-fs (sda6): re-mounted. Opts: commit=600
    [ 47.108016] EXT4-fs (sda7): re-mounted. Opts: commit=600
    [ 57.310942] fuse init (API version 7.17)
    [ 59.255839] NET: Registered protocol family 10
    [ 59.256408] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 69.910943] wlan0: no IPv6 routers present
    Last edited by tmske (2012-01-21 21:41:04)

    Hi,
    I've the same notebook. I've not had any hardlocks so far, but I've not seen so much flash movies yet. Anyway, I just tried closing running youtube-video tab on Kde4 + enabled desktop effects -> Everything's fine.
    Anyway, perhaps we can collect some issues and solutions in this thread. Here are problems, that I encounter:
    - restart does not work
    - errors during boot:
    [ 2.399277] pnp 00:0b: [irq 23]
    [ 2.399308] pnp 00:0b: Plug and Play ACPI device, IDs SMO8800 (active)
    [ 2.932179] pnp 00:0c: can't evaluate _CRS: 12311
    [ 14.616662] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    [ 14.616771] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
    [ 14.616792] iTCO_wdt: cannot register miscdev on minor=130 (err=-16)
    [ 14.616904] iTCO_wdt: probe of iTCO_wdt failed with error -16
    [ 9.262898] sdhci-pci 0000:0b:00.1: SDHCI controller found [1217:8321] (rev 5)
    [ 9.262920] sdhci-pci 0000:0b:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
    [ 9.262966] sdhci-pci 0000:0b:00.1: Invalid iomem size. You may experience problems.
    [ 9.263176] sdhci-pci 0000:0b:00.1: setting latency timer to 64
    Issued solved:
    - in order to make nvidia graphics working you have to disable Optimius in BIOS.
    - Battery not recognized -- fixed after recend updates
    - grub2 does not work. As soon as grub2 loads, the laptop reboots. -> stick to grub1  --  works now (either I did sth wrong the first time or a new version of grub2 fixes this issue)
    - in order to make the touchpad work properly install psmouse-elantech from AUR
       update: this is only a half-solution. vertical scrolling on the right edge works but graphical tools which rely on x11-input-synpatics still don't work. However, everything works fine with kernel 3.3. Once this in the main arch repos you won't need psmouse-elantech anymore.
    Last edited by knue (2012-03-06 23:26:26)

  • I have stored everything on my Macbook pro in a external hard drive (Time Machine)  Now that we have "wiped the machine" I am told I can start it over and load ontent--apps, docs, etc from the hard drive, just plug it in, find the time machine and what?

    I have stored everything on my Macbook pro in a external hard drive (Time Machine)  Now that we have "wiped the machine" I am told I can start it over and load ontent--apps, docs, etc from the hard drive, just plug it in, find the time machine and what?    I need to know what to highligh, what to click on. 

    hirogliffix,
    take a look at this Apple page — in particular, the “Restoring data from Time Machine backups” section and its “Restoring your entire system from a backup” subsection.

  • Mounting USB Hard Drives and Hard Locking

    So, it's been a long time since I've posted here which I have to say, is because Arch was running beautifully for a long time. Sadly though, my laptop was stolen and I was forced to buy a new one. With the new one, I've gotten everything mostly back up and running but I'm having an issue. Obviously the one in the subject line.
    A few things to note about this install and after testing before posting.
    1. Brand new install
    2. All packages are current EXCEPT 3.  I currently have nvidia-256.53-1-x86_64, nvidia-utils with the same version, and kernel26-2.6.35.5-1. These are due to a black screen I was getting on starting my xserver.
    3. HAL is running
    4. Optical disks mount and umount cleanly.
    5. NTFS-3G is installed and working.
    6. My Windows 7 install on the same internal hard drive can be accessed and mounted without a hard lock.
    My problem is this. Whenever I try and connect an external hard drive via USB, it takes a few seconds and then the whole machine hard locks with what looks like a kernel panic(can't do anything and I have blinking lights...ie capslock, etc).  This computer seems to have USB 3.0 which I noticed from Win7 awhile back if that makes a difference. (05:00.0 USB Controller: NEC Corporation Device 0194 (rev 03) )
    Last time I try to mount my WD Passport, I ran dmesg right after I plugged it in before I got my hard lock. The only thing I noticed were the entries at the bottom of things like this...
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    I have no idea whether that has anything to do with it or not. I'd be more than happy to post config files if needed. I've tried googling, the wiki, and the forums and I'm stumped. I actually plugged my drive in one time and got it to mount and opened some folders. Afterward, it hard locked.
    Last edited by Vipes (2010-12-10 07:09:42)

    So, I started looking at my logs. Here's the bottom cut from errors.log:
    Dec 10 08:04:03 localhost kernel: sd 6:0:0:0: [sdb] Assuming drive cache: write through
    Dec 10 08:04:03 localhost kernel: sd 6:0:0:0: [sdb] Assuming drive cache: write through
    Dec 10 08:04:03 localhost kernel: sd 6:0:0:0: [sdb] Assuming drive cache: write through
    Cut from my dmesg when I plugged the drive in:
    usb 2-4: new high speed USB device using xhci_hcd and address 0
    xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
    xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
    xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
    xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
    Initializing USB Mass Storage driver...
    scsi6 : usb-storage 2-4:1.0
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    scsi 6:0:0:0: Direct-Access WD My Passport 070A 1032 PQ: 0 ANSI: 4
    sd 6:0:0:0: Attached scsi generic sg2 type 0
    scsi 6:0:0:1: CD-ROM WD Virtual CD 070A 1032 PQ: 0 ANSI: 4
    sd 6:0:0:0: [sdb] 623769600 512-byte logical blocks: (319 GB/297 GiB)
    sd 6:0:0:0: [sdb] Write Protect is off
    sd 6:0:0:0: [sdb] Mode Sense: 23 00 10 00
    sd 6:0:0:0: [sdb] Assuming drive cache: write through
    sr1: scsi3-mmc drive: 51x/51x caddy
    sr 6:0:0:1: Attached scsi CD-ROM sr1
    sr 6:0:0:1: Attached scsi generic sg3 type 5
    sd 6:0:0:0: [sdb] Assuming drive cache: write through
    sdb:
    scsi 6:0:0:2: Enclosure WD SES Device 1032 PQ: 0 ANSI: 4
    scsi 6:0:0:2: Attached scsi generic sg4 type 13
    sdb1
    sd 6:0:0:0: [sdb] Assuming drive cache: write through
    sd 6:0:0:0: [sdb] Attached SCSI disk
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    ses 6:0:0:2: Attached Enclosure device
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    fuse init (API version 7.14)
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
    Kernel messages show pretty much the same thing. These logs were from just a moment ago when I plugged it in and then removed it. Sometimes it seems to hard lock, others it doesn't. Got me.

  • How to set up password to lock Time Machine files?

    Hello Friends at Apple Community,
    I would like to know how to set up a password to lock Time Machine backup files as it is in Drobo backup server. I have two Time Machine backups for Mac Pro - first backup performed and saved backup created by Time Machine in one of hard drives inside Mac Pro. I am also performing other Time Machine backup externally to Drobo - just to play it safe. But want to set up a lock password on that backup file only for Drobo. I believe the OS X Mountain Lion version 10.8.4. at the moment. I am aware that there is a small update of 10.8.5 as I havent updated it yet... until Time Machine backup is done successfully.
    Please advise. Thanks in advance!

    http://www.macyourself.com/2011/09/04/how-to-password-protect-and-encrypt-time-m achine-backups/

  • I Installed Photoshop 2014 on my Mac, but it seems to freeze my entire machine making me have to turn it off and on again. Any thoughts?

    I Installed Photoshop 2014 on my Mac, but it seems to freeze my entire machine making me have to turn it off and on again. Any thoughts?

    Try chatting with an Adobe Support Specialist:
    http://helpx.adobe.com/adobe-connect/kb/connect-chat-support.html
    This may take awhile: you may find yourself chatting (via typing) with someone from India, but they are good at solving these kind of problems.
    Good luck!

  • P67A-G65 (b3) - Hard Lock Problem

    I recently built a new machine (specs at the bottom of the post), and am experiencing random hard locks that I can't figure out. The locks generally happen 30-60min after booting up the computer, and seem to happen more often when idle than when in use, but I can't confirm that. I have tried turning off XMS and other overclocking on my memory, as well as doing a new install of Windows, but it still seems to be happening. I have updated all my drivers, and my BIOS is v1.8, so it's up to date with the current stable release version. I still need to try individually testing my memory sticks, but if anyone has any other suggestions that might help, they would be very appreciated.
    Here's the hardware I'm using:
    MSI P67-GD65(B3)
    Intel Core i7 2600
    8GB (2x4) Corsair XMS3 Memory (CMX8GX3M2A1600C9)
    Corsair 750TX 750w PSU
    ASUS PCE-N13 PCI Express Wireless Adapter
    Western Digital Caviar Blue 1TB HDD
    MSI N560GTX-TI Twin Frozr II/OC GeForce GTX 560 Ti (Fermi) 1GB 256-bit GDDR5 Video Card
    Windows 7 64bit

    I'm not picking on these specific posts but there is something that needs to be said about the tendency to look for problems in the motherboard or other components when things go wrong.  It's really important to understand that a lockup, random reboot, BSOD, etc. is simply what happens when any of a thousand things go wrong with a computer build.  It's similar to a car that won't start - it could be a failed electrical system, mechanical system or it could just be out of gas.  Because of this, it doesn't help to search for a common thread, you need to look at each problem individually to understand the root cause.
    It's also important to understand why computers from Dell, HP or any other manufacturer doesn't have the same problems you see when you purchase your own parts to build a system.  These companies have research groups who are constantly working with different motherboards, RAM, video cards and other components to determine which ones are most reliable and more importantly, which ones work best together.  When developing a new model, these people carefully select from the parts they have tested to design the new model including all the different video card options, drive options, RAM, etc.  In addition, these systems are always configured to the safest specifications with no overclocking or anything else that could potentially cause a flood of support calls. Then each of these systems are built and tested using a long burn-in period with multiple copies of each system to make sure any potential issues are found and fixed.  All of this is done before a new computer is sold to the public by one of these companies.
    When you build your own system, you must perform these tasks yourself or your chances of success are very low.  You can't just buy components based on what is popular or appears to be the best in class.  You must carefully crosscheck every component to make sure they will (probably) work together.  Finally, you need a systematic approach for assembling and testing your system one step at a time so if a problem occurs you will know what has probably caused it.  
    Just like the companies that sell full computer systems, all reputable computer component companies are also experts at designing and testing the parts they sell.  They know that anytime a component has a problem there is lots of negative publicity, recalls and other consequences they all want to avoid (e.g. the recent Intel problems).  So when you have built a computer that is randomly failing in some way, don't start by looking for problems with the parts you bought.  This will only distract you from finding the real cause because 99.99% of all problems with new computer builds are caused by assembly errors or misconfiguration.  
    There are lots of people on this forum and others willing to help with build problems but you need to start with the assumption that something is wrong with your assembly or configuration and follow the posting guide.  A simple step-by-step troubleshooting approach will save a lot of time in the long run.  
    - D

  • Black Berry 9800 Torch Hard Lock

    Hi Sirs,
    I have  Black Berry Torch 9800. I put more than 10 Times MEP Code wrongly. Now the phone is not accepting any SIM. I think phone has been hard locked by the manufacturer. Please advise how I can remove hard lock from phone, so I can use any network..
    Hope to receive your response soon,
    Best Regards,
    Muhammad Ramzan
    Solved!
    Go to Solution.

    Hi and Welcome to the Community!
    Please see this helpful thread to start:
    http://supportforums.blackberry.com/t5/General-BlackBerry-Functions-and/Unlocking-your-BlackBerry-Gu...
    If you have used up all of your chances to enter the correct unlock code, there is nothing further you can do. Even if you happen to have now the correct code, it is useless. Only the factory can now (legally) unlock your BB. Typically, I've heard that the cost of having BlackBerry do this for you will be greater than the cost of just buying a new one. But, you are able to ask them...see here:
    http://us.blackberry.com/support/programs/technical/incident.jsp
    Note, however, that this process will start with a fee...
    If you obtained your unlock code from somewhere but it was incorrect, your recourse could be with them -- however, they may well question why you exhausted all 10 attempts before contacting them.
    If your BB was already MEP locked and you obtained it from a source that represented it as being able to be unlocked, then your recourse would be with the seller you obtained it from.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Complete and unexpected hard-lock on authentication

    Hello. I've recently experienced my first hard-lock on my MacBook Pro. I'm running 10.6.8, and I can't seem to figure out what cuased it. It's making me very worried for the health and stability of my system.
    What happened was this: I use password protection on my screen saver, and I do not put my laptop into sleep mode. Instead I use a hotcorner to activate the screen saver when I walk away from the machine, and then reauthenticate when I come back. After about ~30 min away from the keys, I came back and tried to authenticate, only to find that the password input window was not accepting keyboard input. Eventually I realized that the system had hard locked for a reason I couldn't understand. I had to force the machine to power down, and then boot it back up. The reboot was slower than I'd expect (though maybe that was just my nerves and imagination). In the hour or so since then, it's not repeated itself, even when trying to replicate the circumstances of the lockup.
    The console messages didn't help much, but perhaps someone else can make more sense of them than I can. From what I can gather, a backup started, and then the ethernet port went down. My VPN client (which wasn't running or connected) then tried to switch interfaces to see if other internet connections were available - despite my not being connected to the VPN or running the client.
    Here's the relevent time stamped log entries between the first notice of hard-locking and rebooting. I've redacted computer, drive, and host names, as well as mac addresses and IP addresses. I'm not sure what to make of it. Any help would be greatly appreciated. I'm not sure if this was a fluke, or a harbringer of something more sinister.
    12/12/11 4:33:09 PM     com.apple.backupd[1322]     Starting standard backup
    12/12/11 4:33:14 PM     com.apple.backupd[1322]     Backing up to: /Volumes/[REDACTED]/Backups.backupdb
    12/12/11 4:33:21 PM     com.apple.backupd[1322]     No pre-backup thinning needed: 3.32 GB requested (including padding), 38.24 GB available
    12/12/11 4:34:47 PM     kernel     Ethernet [AppleBCM5701Ethernet]: Link down on en0
    12/12/11 4:34:47 PM     kernel     CiscoVPN : attempting to attach to all available ethernet interfaces.
    12/12/11 4:34:47 PM     kernel     CiscoVPN : checking if we are already attached to interface: en1
    12/12/11 4:34:47 PM     kernel     CiscoVPN : checking if we are already attached to interface: en0
    12/12/11 4:34:47 PM     kernel     CiscoVPN : attempting to attach to all available ethernet interfaces.
    12/12/11 4:34:47 PM     kernel     CiscoVPN : checking if we are already attached to interface: en1
    12/12/11 4:34:47 PM     kernel     CiscoVPN : checking if we are already attached to interface: en0
    12/12/11 4:34:47 PM     acvpnagent[46]     The network interface for the VPN connection has gone down.
    12/12/11 4:34:47 PM     acvpnagent[46]     Function: logInterfaces File: RouteMgr.cpp Line: 2105 Invoked Function: logInterfaces Return Code: 0 (0x00000000) Description: IP Address Interface List:
    12/12/11 4:34:47 PM     acvpnagent[46]     Function: applyHostConfigForNoVpn File: MainThread.cpp Line: 8446 No network interface is available, will not apply the noVPN host configuration.
    12/12/11 4:34:47 PM     acvpnagent[46]     Current network state: No network interface
    12/12/11 4:34:47 PM     acvpnagent[46]     Function: applyHostConfigForNoVpn File: MainThread.cpp Line: 8446 No network interface is available, will not apply the noVPN host configuration.
    12/12/11 4:34:47 PM     configd[13]     setting hostname to "[REDACTED].local"
    12/12/11 4:34:47 PM     configd[13]     network configuration changed.
    12/12/11 4:34:55 PM     com.apple.backupd[1322]     Copied 902 files (1.2 MB) from volume [REDACTED].
    12/12/11 4:34:56 PM     com.apple.backupd[1322]     No pre-backup thinning needed: 3.32 GB requested (including padding), 38.23 GB available
    12/12/11 4:34:57 PM     com.apple.Finder[174]     Failed to send message to backup server: error = -2
    12/12/11 4:34:58 PM     mDNSResponder[29]      19: Could not write data to client after 10 seconds, 3 replies waiting
    12/12/11 4:35:03 PM     com.apple.backupd[1322]     Copied 153 files (491 KB) from volume [REDACTED].
    12/12/11 4:35:04 PM     com.apple.backupd[1322]     Starting post-backup thinning
    12/12/11 4:35:07 PM     mDNSResponder[29]      19: Could not write data to client after 20 seconds, 3 replies waiting
    12/12/11 4:35:11 PM     com.apple.backupd[1322]     Deleted backup /Volumes/[REDACTED]/Backups.backupdb/[REDACTED]/2011-12-11-155148: 38.24 GB now available
    12/12/11 4:35:11 PM     com.apple.backupd[1322]     Post-back up thinning complete: 1 expired backups removed
    12/12/11 4:35:11 PM     com.apple.backupd[1322]     Backup completed successfully.
    12/12/11 4:35:17 PM     mDNSResponder[29]      19: Could not write data to client after 30 seconds, 3 replies waiting
    12/12/11 4:35:28 PM     mDNSResponder[29]      19: Could not write data to client after 40 seconds, 3 replies waiting
    12/12/11 4:35:38 PM     mDNSResponder[29]      19: Could not write data to client after 50 seconds, 3 replies waiting
    12/12/11 4:35:38 PM     acvpnagent[46]     A new network interface has been detected.
    12/12/11 4:35:38 PM     acvpnagent[46]     Function: logInterfaces File: RouteMgr.cpp Line: 2105 Invoked Function: logInterfaces Return Code: 0 (0x00000000) Description: IP Address Interface List: [REDACTED]
    12/12/11 4:35:38 PM     kernel     Ethernet [AppleBCM5701Ethernet]: Link up on en0, 1-Gigabit, Full-duplex, No flow-control, Debug [REDACTED]
    12/12/11 4:35:38 PM     kernel     CiscoVPN : attempting to attach to all available ethernet interfaces.
    12/12/11 4:35:38 PM     kernel     CiscoVPN : checking if we are already attached to interface: en1  12/12/11 4:35:38 PM     kernel     CiscoVPN : checking if we are already attached to interface: en0

    I saw one very recent question where Test Pilot proved to be a problem.
    In due course, you'll probably need to work your way through this -
    https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes

Maybe you are looking for

  • Calling Synchronous RFC Function Module in Background

    Hi all, Currently we are working on some requirement where in we have to retrieve data from one system(CRM) and update the same into another system(ECC). We have developed a RFC Function in CRM system and it is being called from ECC system as in sync

  • No Text Appears in Book (Preview and in Book)

    I just receive a Medium Soft Cover book from Apple and to my surprise there was no text present. I tried printing to pdf or previewing within iphoto and no text appears as well. My font sizes are all small. I even created a new book with a couple pho

  • Problem regarding SAP Project System & Material Management

    Hello Experts, please check our process as below: Order confirms than sales order and project will create material of BOM is assigned to any activity in project so these material (RM) will be procured and consumed assign activity for all work done on

  • 9.0.4 migration to 10 out-of-place

    Does anyone have any documentation on doing a migration of an existing Oracle 9.0.4 collaboration suite from an existing server (same os) to another server that has Collaboration suite 10g installed -

  • Bluetooth Modem disconnect/timeout

    Hi I currently have a Eee Pc 1000he running windows xp and windows 7 rc. I have been trying to get my netbook to connect via bluetooth to my nokia e71 so that I can use internet when on the go. My issue is that when I connect to the handset everythin