[solved] Volume control in amarok doesn't work anymore

Hi,
since today in amarok (2.4.1) the volume control doesn't work anymore. I can change the level on the switch on the top right but it doesn't change the actual volume.
The volume control in my KDE tray works as usual.
Last edited by Barghest (2011-07-05 18:01:07)

Just came back from suspend and it works again.
Sorry for the noise.

Similar Messages

Remote control Macbook Pro doesn't work anymore. Please help

Hi,
my IR remote control worked fine initally. Then I didn't use it for a while and when I did again, it didn't work anymore. I changed the battery, but no success. It just doesn't link anymore.
What to do?
Best regards, Peter

If you have AppleCare, call them. Let them deal w/it.

[solved] Amarok 2.3.1: streaming/webradio doesn't work anymore

I updated to Amarok 2.3.1 and now music streams/webradio doesn't work anymore. Anyone else experiencing this? Someone know, how I can get rid of this?
EDIT/SOLUTION: Switched phonon-backend from gstreamer to xine and now it works again.
Last edited by ChemBro (2010-06-08 10:38:13)

sultanoswing wrote:
Yes.
I had to manually download the .asx file (e.g. wget http://www.newstalkzb.co.nz/audioasx.as … ass=48812).
Then open the downloaded .asx file with a text editor.
Find the following information e.g. "mms://wms-trn-all.streaming.net.nz/trn-newstalk-zb-akl".
This is the proper link that amarok can and will play. A bit of a faff, but it works for me.
I've always had to do it this way
I guess i was following the old maxim "it's not a bug, it's a feature"

Choosing start volume with [alt] doesn't work anymore

Hi there,
On my MBP (15" early 2011). Normally I can choose from what volume I want to boot by pressing the [alt] key right after switching on my MBP. I have OSX Snow Leo and Win7 (64bit) installed.
However since I installed the latest software updates several days ago, including a firmware update for the thunderbolt connection, the choosing of the start volume by pressing [alt] on startup doesn't work anymore: I can move the mouse, but the two volumes don't appear on the screen. All I can do is to switch off. I can however boot under both, OSX and Win7 by choosing the "restart under Win7/OSX" option in the other system respectively.
I now found out, that it works perfectly fine again when I have my 27" Apple Cinema display (mini display, not thunderbolt) connected to my MBP. When it's not connected I am having the issue.
My guess is that the thunderbolt firmware update causes this.
Anyone got an idea? It's quite a pain in the *** that I always have to start one system at first to get in the other one at the moment.
Thx

Hi Fortuny,
thx for your answer! I just have reseted this NVRAM as described in the support page, and think I have done it right. It worked as said there, I just didn't have to set any time or resolution things afterwards, as it is written there that it might have to be.
Sadly it didn't seem to help. Anyway, I do have news:
When the two volumes didn't appear again on the startup screen, I sat back and thought about what the issue could be. After approximately one minute starin on the screen, suddenly the two volumes appeared! So in fact it DOES work, just it takes about a minute now when I don't have the cinema display attached.
Does this additional info say anything to the experts out there? It's still not solved, as it is rather inconvenient to wait a minute untill I can choose the startup volume.
Thx for any sugestions!

Since Lion installation the remote control first generation, doesn't work as usually. On Leopard when I pushed the menu button, it opened a menu that showed music, films, photo. Now it doesn't work anymore. Is there anyone to explain me why this happen?

Since Lion installation the remote control first generation, doesn't work as usually. On Leopard when I pushed the menu button, it opened a menu that showed music, films, photo. Now it doesn't work anymore. Is there anyone to explain me why this happen? Thank you.

Sadly Snow Leopard was the last OS X to have Front Row and it is no longer offered in Lion or Mountain.
see > Farewell Front Row | Macworld
If you want, you can get it back with some tweaking.
see > Get Front Row for Mac OS X 10.7 Lion
or > Use Front Row In OS X Lion
Also note: that your remote should still be working for waking the Mac, volume control and iTunes...? If it is not, let us know for help with it.

I can't seem to get my iMac (late 2009 model) into automatic sleep mode. If I manually put it into sleep I don't have any issues. I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion.

I can't seem to get my iMac (late 2009 model) into automatic sleep mode. If I manually put it into sleep I don't have any issues.
I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion. I now want to fix the underlying problem.
I'm not running any weird background processes and in my energy saver settings I've tagged "put the hard disk to sleep when possible:, "allow power button to put computer to sleep" and "automatically reduce brigthness". All pretty standard.
Is there anyone who can give me some pointers ?

Today I solved the same problem for my iMac running Snow Leopard. See https://discussions.apple.com/thread/3008791#15947706. The method may help you, too.
For me it was the DynDNS Updater preventing my iMac from automatically entering sleep mode.
To my knowledge the cause of this sleep problem can only be a peripheral device or a process. So I suggest to first unplug all peripherals and test whether that's the cause. If not, I suggest to terminate one process after another and to test automatic entering of sleep mode after each. Start with user processes; continue with system process if necessary.
At least that's the way I found the offending process. Fortunately, I was able to change the configuration of that process to allow again automatic entering of sleep mode.
Good luck!

Before I upgraded my iPad mini, you could turn off apps to save battery power by double clicking the control button and then holding your finger on the app button until the minus sign appeared. That doesn't work anymore. How do you turn off the apps wit

Before I upgraded my iPad mini, you could turn off apps to save battery power by double clicking the control button and then holding your finger on the app button until the minus sign appeared. That doesn't work anymore. How do you turn off the apps with ios7

Now you swipe downward, the app will appear and you delete, keep scolling to the right as in the past. With the new operating system you also swipe downward to get the search bar to find an app

I upgraded my iphone 5 to 6.1.4 and the earphone doesn't work anymore. Anyone has an idea on how to solve the problem ? Thank you

I upgraded my iphone 5 to 6.1.4 and the earphone doesn't work anymore. Anyone has an idea on how to solve the problem ? Thank you

Hi Jboudet,
Welcome to Apple Support Communities.
You can find some suggestions for troubleshooting your iPhone at these links:
iPhone Assistant
http://www.apple.com/support/iphone/troubleshooting/
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Have a good one,
Jeremy

After updating to 10.7.4 Mission Control (key F3) doesn't work and neither switching the desktop gestures on magic mouse.

after updating to 10.7.4 Mission Control (key F3) doesn't work and neither switching the desktop gestures on magic mouse. please give me the advice what to do?

after updating to 10.7.4 Mission Control (key F3) doesn't work and neither switching the desktop gestures on magic mouse. please give me the advice what to do?

Earbuds remote control doesn't work anymore!

Hi!
I've had an iPhone 4 since September 2010, and I've always used the earbuds that came with him.They used to work great until this week.
Now, it's buillt-in remote control doesn't work anymore.By that I mean I can not skip, pause or even use voice control through the earbuds.
And this probably isn't an iPhone problem, because I tested these earbuds in my iPad 2 and the remote control still doesn't work.
I noticed that the rubber that used to cover the cable itself is coming off, especially near the remote control area.
Is there a fix for these unresponsive controls?
Or what Apple email I should reach in order to ask them about this issue?
Thanks!
My iPhone 4 is running iOS 5.0 and so is my iPad 2.

Is your phone locked in portrait orientation? I've found that for some reason my controls will not work when my portrait orientation is locked.
Try double-clicking the main button, and then sliding your thumb right. You should get some controls at the bottom of your screen, and the button on the far left is the Portrait Lock button. Try unlocking your phone, and see if your earbuds will then work.
Hope that might help!
-Dave

As hwd doesn't work anymore... [SOLVED]

As hwd doesn't work anymore, I have a problem with installing and maintaining Xorg on my Arch machine. I recently reinstalled Archlinux on my desktop machine, and was unaware that Xorg had been updated.
So when I tried to do my normal installation routine of installing all the necessary drivers, xorg and hwd, I ran into a problem. When I ran hwd -u + -xa, it said No X server installed. I searched around and found out that hwd was not supported any longer.
So I figured i'd just do the manual configuration of Xorg. So I ran X -configure, and then ran the server. Everytime I did this, the computer would freeze up upon entering the environment.
So I tried doing nvidia-xconfig, and ended up actually getting into the environment, but after all the xterm windows had popped up, it froze again everytime.
After reading abit articles on the subject, I tried letting Xorg simply use HAL for it's hardware recognization. This time it worked, and I was able to enter the environment with no problem. So I went with this alternative, and installed Openbox.
Now, the problem shows up when I enter the environment. I can clearly see that there's somewhat of a problem with the graphics. So I tried configuring a minimal xorg.conf to run along side HAL. This still didn't fix the problem. The problem is, there are areas of the screen that are SLIGHTLY blurry. For example, if I write something in xterm, then move it to certain parts of the screen, the text becomes mildly blurry. It's not a big problem, just irritating. But this little problem may be an indication of a bigger problem. I'm sensing I don't have 3D capabilities, but haven't tested yet.
Another thing is; When I write something in xterm while in the environment, and I hold down the backspace button... Xorg simply crashes without any particular error.
Anyway, my point is; I had an idea that, is there some way to make hwd recognize the xorg server as a older version, making it configure a file for it? I've never had any problem with xorg up until this new update, which irritates me alot, making me want to find some other distrobution of linux.
I hope someone can help me fix this.
Last edited by SomeoneWithAPurpose (2009-05-15 22:24:17)

you could roll back your Xorg version to continue using hwd in the meantime...
I'm assuming you've followed http://wiki.archlinux.org/index.php/Xor … _xorg.conf to try without xorg / with minimal xorg. Have you ensured that your drivers are up to date? I would attempt reinstalling video drivers, trying HAL again with NO xorg file, and if that fails, try it with minimal xorg.
Hopefully someone comes along with a more concrete solution...I'm just hoping to steer you down a path of some new ideas (if you havent already tried this...)
I had some trouble with the latest version. Reinstalling video drivers and running with no xorg.conf was the fix...I know you said you tried this same thing, but you havent specified how new your drivers are or anything... Good luck and free bump!

Internet links doesn't work anymore within my Outlook

My internet links within my Outlook doesn't work anymore when I click on the link (I got a system problem). Anyone who knows what settings I need to do?
Thanks

That being the case, I think the default setting must be corrupted. See here on how to reset: http://www.msoutlook.info/question/706
Or open control panel, go to Default Programs, and then Default settings. Change the file association for Interner Explorer. See if that works
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

After instaling mavericks terminal, preview, app store, etc, doesn't work anymore

after instaling mavericks the terminal, preview, app store, etc, doesn't work anymore...
What have to do to solve this problem?

You ran a defective third-party "utility" such as "CleanMyMac" that purports to "clean up" "junk" files. What it really does is to corrupt the operating system.
The first thing you need to do is remove that software, if you know what it is, according to the developer's instructions. Never install it, or anything like it, again. Then see below.
If you don't already have a current backup, back up all data, then reinstall the OS. You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode.

Updating to ios5 recorder doesn't work anymore

i have an app always working till i have installed ios5 on device.
this is the code.
[code]
UInt32 sessionCategory = kAudioSessionCategory_MediaPlayback;
        AudioSessionSetProperty(kAudioSessionProperty_AudioCategory, sizeof(sessionCategory), &sessionCategory);
        UInt32 audioRouteOverride = kAudioSessionOverrideAudioRoute_Speaker;
        AudioSessionSetProperty (kAudioSessionProperty_OverrideAudioRoute,sizeof (audioRouteOverride),&audioRouteOverride);
        //NSLog(@"url");
        NSURL *url = [NSURL fileURLWithPath:@"/dev/null"];
        //NSLog(@"dizionario");
        NSDictionary *audioSettings = [NSDictionary dictionaryWithObjectsAndKeys:
                                       [NSNumber numberWithFloat: 44100.0],                 AVSampleRateKey,
                                       [NSNumber numberWithInt: kAudioFormatAppleLossless], AVFormatIDKey,
                                       [NSNumber numberWithInt: 1],                         AVNumberOfChannelsKey,
                                       [NSNumber numberWithInt: AVAudioQualityMax],         AVEncoderAudioQualityKey,
                                       nil];
        NSError *error;
        bool b;
        //NSLog(@"audio");
        recorder = [[AVAudioRecorder alloc] initWithURL:url settings:audioSettings error:&error];
        //NSLog(@"audio");
        if (recorder) {
            //NSLog(@"prepara");
            b=[recorder prepareToRecord];
            //NSLog(@"%@",(b ? @"OK" : @"NO"));
            //NSLog(@"meter");
            recorder.meteringEnabled = YES;
            //NSLog(@"recorder");
            b=[recorder record];
            //NSLog(@"%@", (b ? @"OK" : @"NO"));
            //        NSLog(@"leveltimer");
            //        levelTimer = [NSTimer scheduledTimerWithTimeInterval: 0.03 target: self selector: @selector(levelTimerCallback:) userInfo: nil repeats: YES];
        } else {
            NSLog(@"************** ERRORE: ****************");
            NSLog([error description]);
[/code]
the result is that recorder record silence, no peak power, no avarage power.
i use xcode4 (ios inxcode4 is till 4.3, i have not downloaded the latest xcode)
why in ios5 doesn't work anymore?
is not compatible?
thanks

i have downloaded the latest xcode, tryed
Documents or Cache instead of /dev/null but no luck
i have solved but don't know why it stopped working.
the code above was putted in a singleton class loaded and initialized once at start of the app.
seems that records only one voice power then stops (even if i have controlled that recording=true, metering enabled=true ecc...in logs)
now i have putted the same code in a method of the singleton class and called that method from the file of the screen "ingame" and works...
mmm.......any ideas why it happens?

Touchscreen doesn't work anymore

hi there ,
I have an issue with my pavilion 22 all in one ,it is ony 1 month old ,and the touchscreen doesn't work anymore ,i refreshed the computer one and it worked but i cannot carry this way :'( any suggestions please ?
thanks
beadswire

I have a different type of TouchSmart, but this may work for you:
Press the Windows logo key + X (if using a Windows 8 computer -- if Windows 7, click the Start button, type Device Manager, and click Device Manager in the search results).
Select Device Manager from the list.
Click the little arrow next to Human Interface Devices to expand the list.
Click the touch screen driver (in my case, NextWindow Voltron Touch Screen).
Right-click, and select Enable from the list.
Click Yes if a dialog box asks if you are sure you want to enable the touch screen driver.
On some models, it isn't obvious which device in the list controls the touch screen. I have read in other posts that some people have fixed the problem by disabling and re-enabling each device.
If that does not work, you might try going to hp.com (http://www8.hp.com/us/en/support-drivers.html) and clicking Drivers & Downloads.
In the search field, enter your product name or number, and then click Go. Select your operating system from the drop-down list under Select your operating system, and then click Next. If there are any available graphics drivers under Select a download below, click the plus sign next to Driver - Graphics, and then click the driver name. In the Download options and information window, click Download . Follow the onscreen directions to download the driver. Restart the computer.
~Lil.Liebe
Clicking the white KUDOS THUMBS UP on the right is a way to say thanks!
Click Accept as Solution on a reply that solves your issue to help others in search of answers.

[solved] Volume control in amarok doesn't work anymore

Similar Messages

Maybe you are looking for