[Solved]Webcam Creative Live not working

Hi,
I think there's a problem with one of the latest updates, my webcam was working fine since before
myself@Desktop ~]$ dmesg |tail
usb 2-2: USB disconnect, address 3
gspca: disconnect complete
usb 3-1: new full speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
gspca: probing 041e:4064
ov519: I2C synced in 0 attempt(s)
ov519: starting OV7xx0 configuration
ov519: Sensor is an OV7670
gspca: probe ok
gspca: probing 041e:4064
[myself@Desktop ~]$ spcaview
Spcaview version: 1.1.8 date: 25:12:2007 (C) [email protected]
Initializing SDL.
SDL initialized.
bpp 3 format 15
Using video device /dev/video0.
Initializing v4l.
ERROR opening V4L interface
: No such file or directory
[myself@Desktop ~]$ xawtv
This is xawtv-3.95, running on Linux/i686 (2.6.30-ARCH)
xinerama 0: 1280x1024+0+0
WARNING: No DGA direct video mode for this display.
/dev/video0 [v4l2]: no overlay support
v4l-conf had some trouble, trying to continue anyway
v4l2: open /dev/video0: No such file or directory
v4l2: open /dev/video0: No such file or directory
v4l: open /dev/video0: No such file or directory
no video grabber device available
My webcam is a Creative Live IM Vista. Also the sound recorded plays back faster than I recorded.
I've noticed that if I login as a root on KDE4 then xawtv will play fine,
su -c Skype
but skype will shows only green test's display and crash after a while.
F
Last edited by TheSaint (2009-10-05 17:07:55)

groups
disk lp wheel locate http games clamav dbus hal network video audio optical floppy storage scanner camera power users
I made an Arch installation on USB which isn't affected by this sort of problem. Unfortunately I'm not able to find the differences to trace the flaw.
EDIT
Partially solved:
Nvidia packages block the normal user access to /dev/video*
LAST EDIT
Found the issue, Must set a environ variable XLIB_SKIP_ARGB_VISUALS=1. Then I appended to /etc/profile.d/xorg.sh. Also mentioned in this thread
F
Last edited by TheSaint (2009-10-05 17:13:33)

Similar Messages

  • Webcam and bluetooth not working in my G570 on Win7 ultimate

    Webcam and bluetooth not working in my G570 on Win7 ultimate.Reinstalled the drivers.No avail.Web cam icon is not visible anywhere in the system.Only proof i have is there is a cam looking at me on the lid on top.Tried Fn+esc .did not work.Please help.......

    hey Nambiar,
    uninstall both webcam and bluetooth drivers from device manager. let windows install its generic drivers.
    once done, see if you're able to use it.
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • [SOLVED] Xorg and keyboard not working after upgrade.

    Hi guys,
    after a `# pacman -Syyu` I got Xorg not starting and keyboard not working: I am unable to do anything.
    I'm posting here pacman's log that I got by booting an Ubuntu Live CD: https://gist.github.com/anonymous/7517806
    Any hint?
    How do you recover a system once it's gone like this? Many thanks in advance.
    J
    Last edited by ifsixwasnine (2013-12-23 13:58:16)

    WonderWoofy wrote:
    I wouldn't necessarily call this [SOLVED].  At best I would probably mention that you found a workaround.  The addition of '(downgrade)' likely makes it fine, but just FYI for future threads.  There are two reasons for this.  One, others who find this thread are likely to dig into it thinking there is a real solution, and two, if you mark it as [Solved] it might generate less attention, lessening the chances of you actually being helped to a real solution.
    Just my 1.46¢
    You're right, problem wasn't actually solved. In fact, yesterday I upgraded the whole system again and the same problem showed up, but I got it fixed.
    Same scenario: after a boot (shorter than usual), what I had was a tty, but I noticed something that I hadn't noticed the last time: the prompt said "Arch Linux 3.11.[?]".
    The kernel version was supposed to be 3.12.[?] so I started investigating and after several attempts, this is how I got the system working again:
    1. Chrooted into the system
    2. Wiped /boot
    3. Re-installed grub
    4. Re-installed linux kernel
    5. Re-created grub.cfg
    6. ???
    7. Profit
    I'm pretty sure that what originated the problem wasn't a "kernel issue" as I pointed out in my previous post, but it was an incorrect installation of grub: in fact, the grub prompt never showed up before yesterday, the system used to boot straight, ignoring the 5 seconds timeout.

  • Internal Webcam and Microphone not working after Screen Fix

    I own a HP Envy Spectre XT Ultrabook, and last week I tried to use the webcam and the microphone for the first time in a few months.
    However I was shocked to find that Skype kept saying that the webcam was not detected. The microphone also could not register any sound.
    Device Manager did not show any imaging devices or the webcamera, even after setting it to view non-present devices.
    A check using msinfo32 did not review the webcamera either, and there were no problem devices.
    Control Panel >> Sound showed that the Internal Microphone using IDT High Definition Audio Codec was enabled and working, however it could not detect any sound. All drivers are checked to be up-to-date.
    I suspect this has something to do with the screen repair last month which a HP on-site technician came down to replace my screen, although I cannot be 100% sure. Although the screen is now working, the technician did not do a good job reassembling the screen - the bottom left corner of the screen cover has not be able to attach properly to the screen. 
    I have gone through my BIOS setup to make sure that there is no webcam disabled.
    I have tried rolling-back and reinstalling the drivers for the microphone but it did not work.
    I have tried uninstalling CyberLink YouCam (laptop preinstalled webcam software).
    Please help, these two components are very important to me as I am going overseas soon. The laptop is still under warranty.

    Hey ajun,
    Thank you very much for the information!
    For troubleshooting your Webcam, I would suggest taking a look at the document Webcam Troubleshooting (Windows 7). I would suggest the two options Video does not appear in your webcam software (such as YouCam, Skype, Messenger, ect.), and Webcam is not listed in Device Manager.
    For your internal microphone not working either, please take a look at the document Resolving Microphone and Line-in Problems (Windows 7). From this document, I would suggest following the top two symptoms.
    Please let me know the outcome of these troubleshooting steps.
    Good luck, and have a great day!
    I worked on behalf of HP

  • [SOLVED] DPMS screen off not working with xorg 1.16.0, gnome 3

    After the update of xorg into 1.16.0-2, screen is not turned off by DPMS in GNOME.
    I also tried an manual command:
    $ xset dpms force off
    but it's not working.
    In other WM, this command is working.
    With xorg 1.15.2 and gnome 3, there is not this problem.
    When I entered the command, the screen turned off for a couple of seconds and turned back on.
    Last edited by esrevinu (2014-07-22 23:35:07)

    Updating xf86-video-intel to 2.99.912-4 solved the problem.
    Thanks.

  • [solved] NFS client will not work correctly

    I have all my $HOME on an NFS Server. So long I used suse and debian, now I want switch to arch but the nfs-client ist not working correctly:
    I start "portmap nfslock nfsd netfs" over rc.conf. When I do a "rpcinfo -p <ip-arch-system>" I got the following
    stefan:/home/stefan # rpcinfo -p 192.168.123.3
       Program Vers Proto   Port
        100000    2   tcp    111  portmapper
        100000    2   udp    111  portmapper
        100021    1   udp  32768  nlockmgr
        100021    3   udp  32768  nlockmgr
        100021    4   udp  32768  nlockmgr
        100003    2   udp   2049  nfs
        100003    3   udp   2049  nfs
        100003    4   udp   2049  nfs
        100021    1   tcp  48988  nlockmgr
        100021    3   tcp  48988  nlockmgr
        100021    4   tcp  48988  nlockmgr
        100003    2   tcp   2049  nfs
        100003    3   tcp   2049  nfs
        100003    4   tcp   2049  nfs
        100005    3   udp    891  mountd
        100005    3   tcp    894  mountd
    As you see "status" is missing, so the statd is not running. It sould look like the result on my suse box:
    stefan:/home/stefan # rpcinfo -p 192.168.123.2
       Program Vers Proto   Port
        100000    2   tcp    111  portmapper
        100000    2   udp    111  portmapper
        100024    1   udp  32768  status
        100021    1   udp  32768  nlockmgr
        100021    3   udp  32768  nlockmgr
        100021    4   udp  32768  nlockmgr
        100024    1   tcp  35804  status
        100021    1   tcp  35804  nlockmgr
        100021    3   tcp  35804  nlockmgr
        100021    4   tcp  35804  nlockmgr
    There is the "status" line and so the statd is running.
    How can I fix that problem, so that statd ist running on my arch box too?
    Last edited by stka (2007-06-10 15:59:48)

    The Problem ist solved.
    I use ldap for authentication. During the setup of the ldapclient I copied the nsswitch.ldap to nsswitch.conf. But the line for "hosts:" was:
    hosts:          dns ldap
    but in my dns ist no localhost entry. After I changed this line to:
    hosts:          files dns ldap
    everything was ok. The statd is now running and I can start to migrate to archlinux ;-)

  • Adobe FMS 4.5 and Streaming to DVR and Live Not Working

    Hello,
    I am having some issues with streaming Live and DVR. I am fairly new to the FMS world, but not to the streaming media world.
    I am using a FMS server on AWS, version 4.5. I have installed DVRcast on the server and created a test application. I am seeing no errors in the logs, all services are running properly. No errors when connecting to the serve via FMLE. Logged into the Admin Console, I see the connection. In the Adobe Flash Media Playback Setup player, it just buffers. I try to play the rtmp stream in another test player and get a security error. Any suggestions would be greatly appreciated.

    Also having the same problem.
    Have installed the applications and stream to the server using FMLE with the DVR Auto Record on and the server is receiving the stream.
    But there is no file being saved and when I try to connect with a RTMP player it failes to connect, the livedvr_client_test sample code gives back "Main.as : Not connected to FMS yet - Trying again ...."
    Normal LIVE streaming works, it is just the application. Followed the PDF to the letter.
    Any help with this would be great!
    Thank you.

  • Xbox live not working in WPA/WPA2 personal mode.

    Xbox Live is not working in WPA/WPA2 personal mode. It does, however, work in WEP mode. I have 2 windows laptops on my wireless network. when I am on WEP, the laptop is stuck in a perpetual "Acquiring Network Address" state. When I have WPA/WPA2 enabled, my laptops work fine, but xbox live cuts in and out of detecting my network, and I cant even get close to connecting at all.
    So until I figure this out, I have to choose between WEP (xbox live working, and not PCs) WPA(PCs working, not xbox live) or unsecured (risky). what should I do?

    Thats strange topcat, i have exactly the same problem as you except that when i am in WEP encryption my xbox cant even see the extreme on the network and i cant even get it it to connect at all. In WPA mode the xbox sees the network but will not connect. I have rang xbox and they say that it should work and that the problem lies with Apple, although i dont believe this personally. In the meantime ive had to hardwire the xbox to the router which isnt why i bought the router. Disappointed
    Regards
    Stu

  • [SOLVED] OSCDIMG Tool Does Not Work on Windows 10? ReadFile() fails with error code 87. (The parameter is incorrect) on ReFS Storage Space Mirror

    Hello,
    What could be the reason of OSCDIMG premastering tool not working in Windows 10?
    I'm trying to rebuild ISO from the admin setup point and having problems with OSCDIMG failing to read files from the master folder:
    E:\Images>bin\oscdimg.exe -bootdata:2#p0,e,b"D:\ISOFOLDER\boot\etfsboot.com"#pEF,e,b"D:\ISOFOLDER\efi\Microsoft\boot\efisys.bin" -o -h -m -u2 -udfver102 -lwinsetup D:\ISOFOLDER test.iso
    OSCDIMG 2.56 CD-ROM and DVD-ROM Premastering Utility
    Copyright (C) Microsoft, 1993-2012. All rights reserved.
    Licensed only for producing Microsoft authorized content.
    Scanning source tree (500 files in 15 directories)
    Scanning source tree complete (950 files in 95 directories)
    Computing directory information complete
    Image file is 3591864320 bytes (before optimization)
    Writing 950 files in 95 directories to test.iso
    0% complete
    ReadFile failed (\\?\E:\Images\ISOFOLDER\autorun.inf, off=0 len=800 status=103)
    Error 87: The parameter is incorrect.
    Thank you.
    Well this is the world we live in And these are the hands we're given...

    Figured it myself.
    For some reason, the tool does NOT support source locations on ReFS formatted drives. Move the D:\ISOFOLDER location to NTFS formatted drive, and the tool works flawless:
    E:\Images>bin\oscdimg.exe -bootdata:2#p0,e,b"D:\ISOFOLDER\boot\etfsboot.com"#pEF,e,b"D:\ISOFOLDER\efi\Microsoft\boot\efisys.bin" -o -h -m -u2 -udfver102 -lwinsetup D:\ISOFOLDER D:\TEMP\test.iso
    OSCDIMG 2.56 CD-ROM and DVD-ROM Premastering Utility
    Copyright (C) Microsoft, 1993-2012. All rights reserved.
    Licensed only for producing Microsoft authorized content.
    Scanning source tree (500 files in 15 directories)
    Scanning source tree complete (950 files in 95 directories)
    Computing directory information complete
    Image file is 3591864320 bytes (before optimization)
    Writing 950 files in 95 directories to D:\TEMP\test.iso
    100% complete
    Storage optimization saved 45 files, 16310272 bytes (1% of image)
    After optimization, image file is 3577761792 bytes
    Space saved because of embedding, sparseness or optimization = 16310272
    Done
    Well this is the world we live in And these are the hands we're given...

  • [SOLVED] snd_atiixp / Realtek ALC655 - not working

    Well, i bought new motherboard MS-7031 with ATI chipset (ATI Radeon 9100 IGP Pro) and i can't run sound in linux system. In Ubuntu Live CD 7.10 sound don't work too. I found some solutions in google but don't help. I haven actually new kernel. System load modules but not created device files...
    Sound card: 6 channels S/W audio codec Realtek ALC655 code
    lspci | grep -i audio
    00:14.5 Multimedia audio controller: ATI Technologies Inc Unknown device 4361 (rev 03
    lsmod|grep snd
    snd_seq_oss 30336 0
    snd_seq_midi_event 6656 1 snd_seq_oss
    snd_seq 48432 4 snd_seq_oss,snd_seq_midi_event
    snd_seq_device 6796 2 snd_seq_oss,snd_seq
    snd_pcm_oss 38656 0
    snd_mixer_oss 14848 1 snd_pcm_oss
    snd_atiixp 15756 0
    snd_ac97_codec 97828 1 snd_atiixp
    ac97_bus 2048 1 snd_ac97_codec
    snd_pcm 68228 3 snd_pcm_oss,snd_atiixp,snd_ac97_codec
    snd_timer 19848 2 snd_seq,snd_pcm
    snd 46628 9 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_atiixp,snd_ac97_codec,snd_pcm,snd_timer
    soundcore 6496 1 snd
    snd_page_alloc 8072 2 snd_atiixp,snd_pcm
    ls -l /dev/snd/
    crw-rw---- 1 root audio 116, 3 cze 21 21:11 seq
    crw-rw---- 1 root audio 116, 2 cze 21 21:11 timer
    /etc/rc.d/alsa start and alsactl store get error:
    /usr/sbin/alsactl: load_state:1573: No soundcards found...
    alsamixer
    alsamixer: function snd_ctl_open failed for default: No such file or directory
    alsaconf fonud card but not working.
    I try:
    - reinstalling alsa
    - Realtek drivers (alsa-drivers)
    - add snd_atiixp_modem to black list,
    - add modules to rc.conf
    - compiling new alsa with alsa wiki solution
    - compiling new kernel with alsa and sound driver as module and next time as built-in
    and nothing...
    erros when system boot:
    atiixp: codec read timeout
    AC'97 2 does not respond - RESET
    AC'97 2 access is not valid [0xffffffff], removing mixer.
    atiixp: no codec available
    // sorry for english
    Last edited by dikamilo (2008-07-06 17:32:47)

    Try it with adding
    options snd-atiixp ac97_codec=0
    to your /etc/modprobe.conf.

  • [Solved] Wacom pen buttons not working

    Hi, this is probably simple to fix, but I don't understand everything well enough to get it set up.  I have a Fujitsu T5010 with internal Wacom tablet.  The Wacom drivers are installed.  I can use the pen to move the pointer, and click.  However, the buttons on the side of the pen do not work.  Also, the eraser end of the pen seems to register as an ordinary single click, rather than a separate input.
    Here are some relevant outputs:
    $ xsetwacom get "Serial Wacom Tablet FUJ02e5 stylus" all
    Option "Area" "0 0 28808 18080"
    'Button' requires exactly 1 value(s).
    Option "ToolDebugLevel" "0"
    Option "TabletDebugLevel" "0"
    Option "Suppress" "2"
    Option "RawSample" "4"
    Option "PressureCurve" "0 0 100 100"
    Option "Mode" "Absolute"
    Option "TabletPCButton" "on"
    Option "Touch" "off"
    Option "Gesture" "off"
    Option "ZoomDistance" "0"
    Option "ScrollDistance" "0"
    Option "TapTime" "250"
    Property 'Wacom Proximity Threshold' does not exist on device.
    Option "Rotate" "none"
    Property 'Wacom Wheel Buttons' does not exist on device.
    Property 'Wacom Wheel Buttons' does not exist on device.
    Property 'Wacom Wheel Buttons' does not exist on device.
    Property 'Wacom Wheel Buttons' does not exist on device.
    Property 'Wacom Wheel Buttons' does not exist on device.
    Property 'Wacom Wheel Buttons' does not exist on device.
    Property 'Wacom Strip Buttons' does not exist on device.
    Property 'Wacom Strip Buttons' does not exist on device.
    Property 'Wacom Strip Buttons' does not exist on device.
    Property 'Wacom Strip Buttons' does not exist on device.
    Option "Threshold" "27"
    Option "ToolType" "325"
    Option "ToolSerial" "0"
    Option "ToolID" "0"
    Option "ToolSerialPrevious" "0"
    Option "BindToSerial" "0"
    Option "TabletID" "144"
    and
    $ xsetwacom get "Serial Wacom Tablet FUJ02e5 eraser" all
    Option "Area" "0 0 28808 18080"
    'Button' requires exactly 1 value(s).
    Option "ToolDebugLevel" "0"
    Option "TabletDebugLevel" "0"
    Option "Suppress" "2"
    Option "RawSample" "4"
    Option "PressureCurve" "0 0 100 100"
    Option "Mode" "Absolute"
    Property 'Wacom Hover Click' does not exist on device.
    Option "Touch" "off"
    Option "Gesture" "off"
    Option "ZoomDistance" "0"
    Option "ScrollDistance" "0"
    Option "TapTime" "250"
    Property 'Wacom Proximity Threshold' does not exist on device.
    Option "Rotate" "none"
    Property 'Wacom Wheel Buttons' does not exist on device.
    Property 'Wacom Wheel Buttons' does not exist on device.
    Property 'Wacom Wheel Buttons' does not exist on device.
    Property 'Wacom Wheel Buttons' does not exist on device.
    Property 'Wacom Wheel Buttons' does not exist on device.
    Property 'Wacom Wheel Buttons' does not exist on device.
    Property 'Wacom Strip Buttons' does not exist on device.
    Property 'Wacom Strip Buttons' does not exist on device.
    Property 'Wacom Strip Buttons' does not exist on device.
    Property 'Wacom Strip Buttons' does not exist on device.
    Option "Threshold" "27"
    Option "ToolType" "379"
    Option "ToolSerial" "0"
    Option "ToolID" "0"
    Option "ToolSerialPrevious" "0"
    Option "BindToSerial" "0"
    Option "TabletID" "144"
    Also, I have no /etc/X11/xorg.conf, but I do have a /etc/X11/xorg.conf.d/50-wacom.conf, which looks like
    $ cat /etc/X11/xorg.conf.d/50-wacom.conf
    Section "InputClass"
    Identifier "Wacom class"
    MatchProduct "Wacom|WACOM|Hanwang|PTK-540WL"
    MatchDevicePath "/dev/input/event*"
    Driver "wacom"
    EndSection
    Section "InputClass"
    Identifier "Wacom serial class"
    MatchProduct "Serial Wacom Tablet"
    Driver "wacom"
    EndSection
    Section "InputClass"
    Identifier "Wacom serial class identifiers"
    MatchProduct "WACf|FUJ02e5|FUJ02e7|FUJ02e9"
    Driver "wacom"
    EndSection
    # Waltop tablets
    Section "InputClass"
    Identifier "Waltop class"
    MatchProduct "WALTOP"
    MatchIsTablet "on"
    MatchDevicePath "/dev/input/event*"
    Driver "wacom"
    EndSection
    # N-Trig Duosense Electromagnetic Digitizer
    Section "InputClass"
    Identifier "Wacom N-Trig class"
    MatchProduct "HID 1b96:0001|N-Trig Pen"
    MatchDevicePath "/dev/input/event*"
    Driver "wacom"
    Option "Button2" "3"
    EndSection
    I am running 64-bit Arch, installed only a month ago (so completely systemd), and fully up to date as of last night.
    Last edited by khelar (2012-12-13 19:03:54)

    Never mind, I solved my own issue.  In my /etc/X11/xorg.conf.d/50-wacom.conf, I modified the following section
    Section "InputClass"
    Identifier "Wacom serial class identifiers"
    MatchProduct "WACf|FUJ02e5|FUJ02e7|FUJ02e9"
    Driver "wacom"
    EndSection
    to read
    Section "InputClass"
    Identifier "Wacom serial class identifiers"
    MatchProduct "WACf|FUJ02e5|FUJ02e7|FUJ02e9"
    Driver "wacom"
    Option "Button1" "1"
    Option "Button2" "2"
    Option "Button3" "3"
    EndSection

  • [SOLVED] cat6500 vlan filtering not working

    Hello!
    I have cat 6500 with SUP32-GE-3B/MSFC2A/PFC3B, s3223-adventerprisek9-mz.122-33.SXJ6.bin,
    and WS-X6148-GE-TX module.
    And I have a couple of 3750G.
    On all of 3750G there is a broadcast filtering of VLAN 4000, and it's working:
    mac access-list extended badhosts
      permit any host ffff.ffff.ffff
    vlan access-map dropbad 10
      action drop
      match mac address badhosts
    vlan access-map dropbad 20
      action forward
    vlan filter dropbad vlan-list 4000
    Then i copy this config to 6500, and it's not working.  I configured two ports, one is switchport access vlan 4000 and other is switchport capture allowed vlan 4000, and i see on both ports same broadcast traffic. Filter is working, but packets are not dropping. I've tried to find something in manual, but found only about platform cwan acl software-switched, enabled it, nothing changed.
    cat6500# sh vlan filter
    VLAN Map dropbad:
            Configured on VLANs:  4000
                Active on VLANs:  4000

    i think i solve the problem: to make vlan filtering to work on 6500, i've added:
    # conf t
    (config)# int vlan 4000
    (config-if)# no shut
    (config-if)# mac packet-classify
    Now, how to mark this question answered?

  • Hard drive crashed - webcam & fingerprint scanner not working

    Hello,
    One fine morning my Lenovo 3000 V100 Hard drive crashed. I couldnot retrieve anything but external backups.
    With advise from IBM service center i had to buy new hard drive and new OS.
    I downloaded all drivers and restored almost everything but finger print scanner & webcam not working.
    I was using both quite extensively. I couldn't find Omnipass software to restore my saved logins and could not find Biscam software for webcam.
    The drivers i downloaded from lenovo but not working are:
    Fingerprint driver : 62fi07ww.exe
    Webcam driver : 62ds13ww.exe
    Can you suggest some driver & software to restore these.
    Thks

    Hello Admins / Moderators,
    No takers for this problem....

  • Webcam is showing "not working"

    After upgrading to Windows 10 my webcam is showing not plugging to any webcam and 260ci WIA Driver (USB) is showing exclamation mark on it and written that "device is not working (error 10)..please recover this.. 

    It is under warranty.  Apple will fix it or replace it.  Make an appointment to visit and Apple store.

  • Webcam and daqmx not working together

    Hi there,
    I have a vi that uses serial-to-usb connections, to acquire data and control external machines. I added a "subcode" to use a webcam for monitoring, it worked fine. then I added another "subcode" to communicate with a USB6009 daq to acquire an analog voltage. So now I can either acquire video from the webcam, or acquire voltage from the daq, but not both. And it's not me who decides what to acquire, it is the vi, the first run it acquires video and ignores the daq (voltage graph is empty), when I abort and run the vi again, it ignores the webcam, and acquires from the daq.
    All this happens with no errors.
    P.S. the first time I ran this VI it worked properly with video and daq, and that was the only time!
    Anyone knows what's happening?

    hi StephanieO
    Unfortunately I cannot post the complete code (NDA agreement) but I will post different parts of these modules, that should give you an idea about the libraries I used.
    Attachments:
    image001.png ‏18 KB
    image003.png ‏19 KB
    image005.png ‏14 KB

Maybe you are looking for