[SOLVED] weird beagle-status output?

my system's gears were grinding a little more than usual, and while idle, i noted that beagle was using a tad more resources than it should. i checked beagle-status and found the following:
** (/usr/lib/beagle/Info.exe:6862): W10NING **: Symbol file /usr/lib/beagle/Beagle.dll.mdb has incorrect version (expected 50.0, got 39)
** (/usr/lib/beagle/Info.exe:7003): WARNING **: Symbol file /usr/lib/beagle/Beagle.dll.mdb has incorrect version (expe9ted 50.0, got 39)
** (/usr/lib/beagle/Info.exe:7015): WARNING **: Symbol file /usr/lib/beagle/Beagle.dll.mdb has incorrect version (expected 50.0, got 39)
it just seems to be spitting out the above in variations, and i don't really understand what's happening. it seems to still be organizing things, as every once in a while, it'll say something normal like Status Indexing in "home/krup/school/paper.odt" for instance, but the rest of the time it just spits out - what seems to me - gibberish.
i should note that i did upgrade this morning and besides the klib problem that was mentioned on the front page, i've had nothing else go wrong. anyone heard or experienced anything like this?
Last edited by krupintupple (2008-10-23 23:10:47)

hey all, i figured out what was going on. well, not really. however, a few days after this message, beagle went down for the count. turns out *something* was wrong. informative, i know! however, i recompiled the package on my end and not only is it back, it's also not spitting out weird output.
here's the thread of interest, if ye discover you have the same ailment as i did:
http://bbs.archlinux.org/viewtopic.php?id=57557
Last edited by krupintupple (2008-10-23 23:16:02)

Similar Messages

Cluster Status Output

Hi
I was just checking the clutser status output and noticed that under--Device Groups Status-- ALL disks are showing Offline
=== Cluster Device Groups ===
--- Device Group Status ---
Device Group Name           Primary          Secondary          Status
dsk/d6                      -                -                  Offline
dsk/d7                      -                -                  Offline
dsk/d8                      -                -                  Offline
dsk/d9                      -                -                  Offline
dsk/d10                     -                -                  Offline
dsk/d11                     -                -                  Offline
dsk/d12                     -                -                  Offline
dsk/d13                     -                -                  Offline
dsk/d14                     -                -                  Offline
dsk/d15                     -                -                  Offline
dsk/d1                      -                -                  Offline
dsk/d2                      -                -                  Offline
dsk/d3                      -                -                  Offline
dsk/d4                      -                -                  Offline
dsk/d5                      -                -                  Offline
DID Status os showing OK
=== Cluster DID Devices ===
Device Instance          Node                                   Status
/dev/did/rdsk/d1         <Node 1>                           Ok
                                 <Node 2>                          Ok
/dev/did/rdsk/d10        <Node 1>                          Ok
                                   <Node 2>                        Ok
Is this state of all disks groups showing Offline normal . When do these devices status changes to online
There are no diskgroups/metasets setup specifically
Some of these disks are part of a zpool having the application
The application    is currently up and running in the cluster
Any inputs are appreciated
TIA

Hi,
yes, offline is the default state for these devices after Solaris Cluster installation.
In the Oracle Solaris Cluster software, all multihost devices must be under control of the Oracle Solaris Cluster software. The Oracle Solaris Cluster software automatically creates a raw device group for each disk and tape device in the cluster. However, these cluster device groups remain in an offline state until you access them as global devices.
More details in the Oracle Solaris Cluster Concepts Guide - Device Groups
Hth,
Juergen

[SOLVED] Weird Boot Problem

I carried out an -Syu on my eeepc a couple of weeks ago. Unusually, this resulted in all kinds of error messages at boot time. most of which I've hunted down and squashed. The machine has functioned correctly throughout.
However, there is one message which I cannot find. When the system boots, the on-screen command line output displayed before the desktop is loaded (lxde) shows a "Login:" prompt, which is followed immediately by the display of an error message
FATAL: Module and not found
I can't find this in any of the logs, so I don't know where to begin. Module "and"??!!
Any advice would be very welcome.
Thanks in advance
Last edited by myrlin (2011-10-28 14:10:21)

I have just discovered that this message is being generated by UFW.
I have it in my Daemons array.
A manual start (or restart) also fails with the same message.
Strangely, when accessing UFW through GUFW, all seems to be normal.
"ufw status" reports "active". Curious!
**EDIT**
I finally solved the problem by completely removing ufw and gufw (including ALL configuration files), then re-installing. I never did find out what had been corrupted, or how, but - hey - life's too short!!
Many thanks to everyone for their help and support
Last edited by myrlin (2011-10-28 14:13:36)

[SOLVED] No sound, dummy output

I have no sound on my arch linux installation, and I believe it may be related to updating my kernel. Two weeks ago I had sound working perfectly, however just yesterday I noticed that my output device is listed as "Dummy Output"
I use the following two pulseaudio packages:
pulseaudio 6.0-1
pulseaudio-alsa 2-3
Output from "cat /proc/asound/cards
0 [HDMI ]: HDA-Intel - HDA Intel HDMI
HDA Intel HDMI at 0xf7b14000 irq 32
1 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xf7b10000 irq 31
Output from "lspci -nn"
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller [8086:0c04] (rev 06)
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller [8086:0c01] (rev 06)
00:02.0 VGA compatible controller [0300]: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller [8086:0416] (rev 06)
00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:0c0c] (rev 06)
00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI [8086:8c31] (rev 05)
00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 [8086:8c3a] (rev 04)
00:1a.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 [8086:8c2d] (rev 05)
00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller [8086:8c20] (rev 05)
00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 [8086:8c10] (rev d5)
00:1c.3 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 [8086:8c16] (rev d5)
00:1c.4 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 [8086:8c18] (rev d5)
00:1c.5 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #6 [8086:8c1a] (rev d5)
00:1d.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 [8086:8c26] (rev 05)
00:1f.0 ISA bridge [0601]: Intel Corporation HM87 Express LPC Controller [8086:8c4b] (rev 05)
00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c03] (rev 05)
00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22] (rev 05)
01:00.0 3D controller [0302]: NVIDIA Corporation GK106M [GeForce GTX 765M] [10de:11e2] (rev a1)
03:00.0 Ethernet controller [0200]: Qualcomm Atheros Killer E220x Gigabit Ethernet Controller [1969:e091] (rev 13)
04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader [10ec:5227] (rev 01)
05:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8723AE PCIe Wireless Network Adapter [10ec:8723]
Last edited by hextet (2015-02-16 17:21:29)

Nevermind I solved the problem!
Simply deleted the director ~/.config/pulse, rebooted, and everything worked!

[solved] show battery status in PS1 not working correctly (script)

Hey,
I got this script to show the battery life of my laptop in my PS1:
#!/bin/bash
BATTERY=/sys/class/power_supply/BAT1
REM_CAP=`cat $BATTERY/energy_now`
FULL_CAP=`cat $BATTERY/energy_full`
BATSTATE=`cat $BATTERY/status`
CHARGE=`echo $(( $REM_CAP * 100 / $FULL_CAP ))`
NON='\033[00m'
BLD='\033[01m'
RED='\033[01;31m'
GRN='\033[01;32m'
YEL='\033[01;33m'
COLOUR="$RED"
case "${BATSTATE}" in
'Charged')
BATSTT="$BLD=$NON"
'Charging')
BATSTT="$BLD+$NON"
'Discharging')
BATSTT="$BLD-$NON"
esac
if [ "$CHARGE" -gt "99" ]
then
CHARGE=100
fi
if [ "$CHARGE" -gt "30" ]
then
COLOUR="$GRN"
fi
if [ "$CHARGE" -gt "15" ]
then
COLOUR="$YEL"
fi
echo -e "${COLOUR}${CHARGE}%${NON} ${BATSTT}"
I made it executable: chmod +x /home/kanikuleet/scripts/battery_status.sh
Put this in my .bashrc file: PS1="[ \$(/home/kanikuleet/scripts/battery_status.sh) ] \u@\h:\w \$ "
Built it: source ~/.bashrc
Now I get this errors:
/home/kanikuleet/scripts/battery_status.sh: Line 30: [: echo $(( $REM_CAP * 100 / $FULL_CAP )): integer expression expected
/home/kanikuleet/scripts/battery_status.sh: Line 35: [: echo $(( $REM_CAP * 100 / $FULL_CAP )): integer expression expected
/home/kanikuleet/scripts/battery_status.sh: Line 40: [: echo $(( $REM_CAP * 100 / $FULL_CAP )): integer expression expected
My bash promt currently looks like this:
[ echo $(( $REM_CAP * 100 / $FULL_CAP ))% ] kanikuleet@arch: ~ $
I have acpi installed and BAT1 is my battery, I checked it.
Can anyone help??
Last edited by kanikuleet (2012-12-28 22:21:10)

kanikuleet wrote:Works! Thank you
In that case, please mark your thread as [solved] by editing the title of your post.

[SOLVED] weird color escapes

I'm using Konsole in XFCE and every now and then I get the following output. The text should be colored, and sometimes it is, but annoyingly often, it is not. Has anyone experienced this before? If so, is there a solution?
ESC[1;31mType: ESC[0mfunction
ESC[1;31mBase Class: ESC[0m<type 'function'>
ESC[1;31mString Form:ESC[0m<function qr at 0x9ca15dc>
ESC[1;31mNamespace: ESC[0mInteractive
ESC[1;31mFile: ESC[0m/usr/lib/python2.7/site-packages/scipy/linalg/decomp_qr.py
ESC[1;31mDefinition: ESC[0mESC[0mspESC[0mESC[1;33m.ESC[0mESC[0mlinalgESC[0mESC[1;33m.ESC[0mESC[0mqrESC[0mESC[1;33m(ESC[0mESC[0maESC[0mESC[1;33m,ESC[0m ESC[0moverwrite_aESC[0mESC[1;33m=ESC[0mESC[0mFalseESC[0mESC[1;33m,ESC[0m ESC[0mlworkESC[0mESC[1;33m=ESC[0mESC[0mNoneESC[0mESC[1;33m,ESC[0m ESC[0mmodeESC[0mESC[1;33m=ESC[0mESC[1;34m'full'ESC[0mESC[1;33m,ESC[0m ESC[0mpivotingESC[0mESC[1;33m=ESC[0m
ESC[0mFalseESC[0mESC[1;33m)ESC[0mESC[1;33mESC[0mESC[0m
ESC[1;31mSource:ESC[0m
ESC[1;32mdefESC[0m ESC[0mqrESC[0mESC[1;33m(ESC[0mESC[0maESC[0mESC[1;33m,ESC[0m ESC[0moverwrite_aESC[0mESC[1;33m=ESC[0mESC[0mFalseESC[0mESC[1;33m,ESC[0m ESC[0mlworkESC[0mESC[1;33m=ESC[0mESC[0mNoneESC[0mESC[1;33m,ESC[0m ESC[0mmodeESC[0mESC[1;33m=ESC[0mESC[1;34m'full'ESC[0mESC[1;33m,ESC[0m ESC[0mpivotingESC[0mESC[1;33m=ESC[0mESC[0mFalseESC[0mESC[1;33m)ESC[0mESC[1;33m:ESC[0m
ESC[1;34m"""Compute QR decomposition of a matrix.ESC[0m
ESC[1;34mESC[0m
ESC[1;34m Calculate the decomposition :lm:`A = Q R` where Q is unitary/orthogonalESC[0m
ESC[1;34m and R upper triangular.ESC[0m
ESC[1;34mESC[0m
ESC[1;34m ParametersESC[0m
ESC[1;34m ----------ESC[0m
Last edited by ayr0 (2012-05-01 20:02:16)

Solved. I needed to export LESS="-R" to my environment.

[solved]cat with colored output?

just wondering if there is a app like cat, that outputs a file, but with vim/emacs' highlight and line numbering. (or some short of hack)
Why? well, I'm playing around with some C++ and I have multiple little files that I'd like to see on the shell before/after I run g++, and something like that would be quite useful.
Last edited by hack.augusto (2009-10-22 01:13:20)

@bl1nk
that's exactly what I imagined for highlight, thanks.
@Ghost1227
`cat -b` ignores blank lines, `cat -n` solved the problem , thanks
[update]
community/colorgcc is kinda cool too
Last edited by hack.augusto (2009-10-22 01:16:24)

[SOLVED] Can't send output to external monitor

I've got a Dell Inspiron 1501 laptop which I sometimes use to give presentations at my school. Last time, in mid october, it worked perfectly, but now my laptop and the digital projector seem to ignore each other. The only difference between last time and now is that I've updated the system.
This is output of xrandr -q:
$ xrandr -q
Screen 0: minimum 320 x 200, current 1280 x 800, maximum 4096 x 4096
VGA-0 disconnected (normal left inverted right x axis y axis)
LVDS connected 1280x800+0+0 (normal left inverted right x axis y axis) 331mm x 207mm
1280x800 61.0*+
It says that VGA-0 is disconnected, which isn't the case. I've tried pressing Fn+CTR/LCD but it doesn't make any difference.
Can anyone tell me if I am missing something? What's wrong? Why doesn't it work now if it worked fine just over a month ago? Is this a problem with the new X server?
I know I'm asking a lot of questions, but I'd really appreaciate any help. I wouldn't like my students to get the idea that Linux is unreliable (or maybe that I'm just not smart enough).
Cheers
Last edited by troncoso (2009-12-18 19:47:58)

Thanks for answering. Yes, it has an integrated ATI card, and I'm running the radeon driver without an xorg.conf. This is what "lspci -v" says about the card:
01:05.0 VGA compatible controller: ATI Technologies Inc RS482 [Radeon Xpress 200M] (prog-if 00 [VGA controller])
Subsystem: Dell Device 01f5
Flags: bus master, 66MHz, medium devsel, latency 66, IRQ 17
Memory at c8000000 (32-bit, prefetchable) [size=128M]
I/O ports at 9000 [size=256]
Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at c0120000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
Kernel modules: radeon, radeonfb
Cheers

[SOLVED] Weird pacman issue with wine

Good Morning Community,
I'm on X86_64. I've just brought a system out of the ground from a differnt distro. Arch is up and running well.
Then when I went to install wine .....pacman is giving me a strange error. Here is a cut n paste from the terminal
//-----------------Begin cut n pasted text
[dcbdbis@Curly-Sr ~]$ sudo pacman -S wine
error: 'wine': could not find or read package
[dcbdbis@Curly-Sr ~]$
//----------------- End cut n pasted text
I am using one mirror in the pacman.d/mirrorlist:
//----------------Begin cut n pasted text
Server = http://ftp.osuosl.org/pub/archlinux/$repo/os/$arch
//---------------- End cut n pasted text
And in using pacman to list packages, here is what I get
//----------------Begin cut n pasted text
[dcbdbis@Curly-Sr ~]$ sudo pacman -Sl|grep wine
community winefish 1.3.3-9
community winegame 0.2.0-1
community winestuff 0.2.0-1
community winetricks 20101222-1
[dcbdbis@Curly-Sr ~]$
//---------------- End cut n pasted text
Google returns nothing. And I've not found it in the forums, at least the ones I've been able to read in the last three hours.
Does anyone have any idea what's happening?
Ideas on what I can do to find out what's happening?
Help will be greatly appreciated!
Sincerely and respectfully,
Dave...........
Last edited by dcbdbis (2011-01-03 22:47:51)

Leonid.I wrote:
Allan wrote:You need multlib : http://www.archlinux.org/news/true-mult … ux-x86_64/
I would rather do a virtual machine...
Which can't do all the things wine can, due to the considerable additional overhead. Regardless, how's that comment supposed to contribute to the topic at all, especially with no justification.
To the OP, please mark the thread [solved] by editing your first post title.

SOLVED: Getting an Input/Output error when accessing certain files

My system started failing a few days ago because of sudden Input/Output errors when trying to access certain files. It was running fine until various applications started crashing like for example Pidgin (in retrospect probably because of DBus crashing). I decided to reboot and now can't login anymore because the DBus module fails to load which in turn means that HAL doesn't load either and so I can't use my keyboard to login.
The error message I get from DBus is that it can't access the file /etc/dbus-1/system.d/org.freedesktop.PolicyKit.conf because of an Input/Output error. I tried to fix/see what was wrong using the arch livecd. Because I thought my problem had to do with a pacman update that had failed before I'd rebooted, I updated my system and I noticed that when pacman tried to access other files it came back with the same error message. The files seemed pretty random, one of them was fakeroot.conf and then several library files like libfaad (sorry this is kind of vague but I'm away from home right now and can't go online very often so I'm writing this from memory).
I'm guessing its a hard drive problem because checking the filesystem for errors came back with nothing. I was just wondering whether anyone had any other ideas before I go and reinstall. I'm going back home tomorrow so I'll be able to follow any advice/reinstall then.
Last edited by siell (2010-04-08 17:01:37)

UPDATE
It seems to be fixed! The second run of e2fsck fixed some more issues and the files that were causing the problems earlier seemed to have bad inodes. Boots fine now and I can get into my system. I checked and I still have a reasonable amount of free space so I don't think that was the reason ... I have no idea how the filesystem got so corrupted out of nowhere.
A few things are different, for example, it asked me to unlock the keyring and I couldn't mount my external encrypted drive anymore and had to do it manually with cryptsetup. e2fsck made quite a few changes so I imagine it's due to that. Shouldn't be to hard to fix though.
Thanks for your help!

[SOLVED] Weird question: pacman -Syu nothing to do for quite a while

Hi,
Perhaps this an odd question but I feel like for the past 2-3 weeks on two different computers "pacman -Syu" returns "x up to date" for all repos and "nothing to do" as the result. Could nothing really be upgradeable for this long? Can anyone else confirm this or has something gotten goofed? Is there a way to check actual versions with what I have to make sure things really are working properly? Even if nothing was upgradeable I can't remember the last time I saw core, extra, or community actually download without doing "pacman -Syyu". They alway say up to date and I'm thinking this just can't be correct...
What might help for me to post? I haven't changed anything in pacman.conf or pacman.d/mirrorlist...
Thanks,
John
Last edited by jwhendy (2010-09-02 14:20:53)

x33a wrote:
In the future, take a look here:
https://www.archlinux.de/?page=MirrorStatus
That's the link I keep losing. Bookmarking now...
@jwhendy can you change the subject to include the word [SOLVED], please?

[SOLVED] No HTML5 Audio output in Firefox

Hi folks, it seems I don't have any HTML5 audio output within Firefox and was hoping I could get some advice. Here's a run down of the situation:
Everything is unmuted in alsamixer.
Audio works through ALSA with every other application I've tried such as moc, vlc, mplayer etc.
I have an .asoundrc file which correctly sets the default and an alias for another card. I use it to switch audio when using mplayer sometimes.
I've used various HTML5 test pages that report audio tag and and playback is working.
Firebug console never reports any errors when trying to play audio within a page.
I've done a fair bit of searching but the documented solution is almost always to setup an .asoundrc config file, but I already have one.
Last edited by Xik (2014-02-22 14:04:25)

Rasi wrote:of course you have all the gstreamer0.10-plugins installed...
Of course!
karol wrote:
See the optional dependencies: https://www.archlinux.org/packages/extr … 4/firefox/
What's the output of
pacman -Qs gst
local/gstreamer0.10 0.10.36-3
GStreamer Multimedia Framework
local/gstreamer0.10-bad 0.10.23-7
GStreamer Multimedia Framework Bad Plugin libraries (gst-plugins-bad)
local/gstreamer0.10-bad-plugins 0.10.23-7 (gstreamer0.10-plugins)
GStreamer Multimedia Framework Bad Plugins (gst-plugins-bad)
local/gstreamer0.10-base 0.10.36-2
GStreamer Multimedia Framework Base plugin libraries
local/gstreamer0.10-base-plugins 0.10.36-2 (gstreamer0.10-plugins)
GStreamer Multimedia Framework Base Plugins (gst-plugins-base)
local/gstreamer0.10-ffmpeg 0.10.13-2 (gstreamer0.10-plugins)
Gstreamer FFMpeg Plugin
local/gstreamer0.10-good 0.10.31-4
GStreamer Multimedia Framework Good plugin libraries
local/gstreamer0.10-good-plugins 0.10.31-4 (gstreamer0.10-plugins)
GStreamer Multimedia Framework Good Plugins (gst-plugins-good)
local/gstreamer0.10-ugly 0.10.19-9
GStreamer Multimedia Framework Ugly plugin libraries
local/gstreamer0.10-ugly-plugins 0.10.19-9 (gstreamer0.10-plugins)
GStreamer Multimedia Framework Ugly Plugins (gst-plugins-ugly)

[SOLVED] wmii *interactive* status bar?

Hi to all!
I use to write infos in the /rbar of wmii, and everything works.
Now I would like to create buttons down there, like the tags' buttons in the bottom-left corner.
If you click on a tag, you get the corresponding screen. Analogously, I could put a status message for, say, my sound volume, and bind a program to it to increase or decrease the volume.
Is it possible?
Last edited by iosonofabio (2010-01-29 09:15:52)

iosonofabio wrote:
Actually, it is not so easy. I would like to generate different events depending on which button I clicked on, e.g.:
- change volume for button 1;
- change screen luminosity for butt 2.
So I need wmii to generate different events for different buttons, and not only a generic "RightBarClick 1 status" for the whole bar...
echo "Volume button" | wmiir create /rbar/volume
echo "Luminosity button" | wmiir create /rbar/luminosity
wmiir cat /event # Now click on then and observe the events.

[Solved]Weird bar in Gnome log in screen.

I have been running the Arch with Gnome3 for a while and I'm loving Arch. However, recently I'm seeing this weird bar under my name in log in screen. Any solution to that?
Last edited by akshay2000 (2012-03-31 09:49:26)

akshay2000 wrote:Thanks a lot people to respond quickly. After the post, I did some digging. All of us are correct. It IS both - supposed to be there and not supposed to be there. In earlier versions of Gnome (3.0, I guess) they had no such bar. However, they introduced it later a separator.
You're partly correct here. They didn't have this in earlier versions. However this isn't a seperator but an indicator showing which user is selected.
If there's only one user account, this one is now preselected. Before the change you couldn't just simply hit enter and type your password, instead you needed to manually select the user first, which was a big hassle (for me at least).
akshay2000 wrote:While we are at it, can anyone tell me how to apply a gnome shell theme globally? I want all users see the same theme and that would enable me to theme log in screen I guess!
As gnome shell themes are dependend on the user extension which needs to be enabled specifically, I don't think it is possible to set it globally. It won't theme the login screen anyway, because gdm does use its own theme which is kinda inspired by the default shell theme. However you can change some options (i.e. background image) using gdm3setup (AUR).
Last edited by M4he (2012-01-26 07:19:51)

[Solved] Weird harddrive remaining space issue

Edit: Thanks for the advice; looks like the default number is 5% reserved for the root user (a little under 30GB in my case). I guess it pays to read up on a FS before you switch to it.
I just copied the data from one partition over to another and I get the following excerpt `df -h` output.
Filesystem Size Used Avail Use% Mounted on
/dev/sda4 556G 540G 0 100% /home
I'm not sure about this, but shouldn't I have ~26G available? Is there some kind of reserved space or perhaps it isn't counting something? I'm running an EXT4 filesystem which was copied using `cp -rfv --preserve=all` from a JFS source drive.
Last edited by lunchbox (2009-12-08 07:02:03)

Nothing Arch-specific to discuss, really. This is default ext{2,3,4} behaviour.
Man mkfs.ext4
Read up on reserved space for the root user.

[SOLVED] weird beagle-status output?

Similar Messages

Maybe you are looking for