[Solved]Weird problem with ethernet card.
After update which I did 22.01.2010 dhcpcd doesn't get ip adress.
System: laptop Dell Ispiron 1520
List of updates. (ls -ltr in /var/cache/pacman/pkg)
-rw-r--r-- 1 root root 4549165 Jan 22 12:43 coreutils-8.4-1-x86_64.pkg.tar.gz
-rw-r--r-- 1 root root 1069024 Jan 22 12:43 kernel26-firmware-2.6.32.4-1-x86_64.pkg.tar.gz
-rw-r--r-- 1 root root 31510711 Jan 22 12:43 kernel26-2.6.32.4-1-x86_64.pkg.tar.gz
-rw-r--r-- 1 root root 5262256 Jan 22 12:43 kernel26-headers-2.6.32.4-1-x86_64.pkg.tar.gz
-rw-r--r-- 1 root root 587327 Jan 22 12:44 tzdata-2010a-1-x86_64.pkg.tar.gz
-rw-r--r-- 1 root root 132146 Jan 22 12:44 zlib-1.2.3.4-4-x86_64.pkg.tar.gz
-rw-r--r-- 1 root root 859259 Jan 22 12:44 allegro-4.4.0.1-1-x86_64.pkg.tar.gz
-rw-r--r-- 1 root root 628091 Jan 22 12:44 devil-1.7.8-4-x86_64.pkg.tar.gz
-rw-r--r-- 1 root root 305301 Jan 22 12:44 farsight2-0.0.17-1-x86_64.pkg.tar.gz
-rw-r--r-- 1 root root 88020 Jan 22 12:44 fsarchiver-0.6.5-1-x86_64.pkg.tar.gz
-rw-r--r-- 1 root root 8101066 Jan 22 12:44 git-1.6.6.1-1-x86_64.pkg.tar.gz
-rw-r--r-- 1 root root 198102 Jan 22 12:44 mpd-0.15.8-1-x86_64.pkg.tar.gz
-rw-r--r-- 1 root root 380584 Jan 22 12:44 papyon-0.4.4-1-any.pkg.tar.gz
-rw-r--r-- 1 root root 256908 Jan 22 12:44 python-telepathy-0.15.15-1-x86_64.pkg.tar.gz
-rw-r--r-- 1 root root 241891 Jan 22 12:44 rasqal-0.9.17-1-x86_64.pkg.tar.gz
-rw-r--r-- 1 root root 329911 Jan 22 12:44 redland-1.0.10-1-x86_64.pkg.tar.gz
-rw-r--r-- 1 root root 20665585 Jan 22 12:44 smbclient-3.4.5-1.1-x86_64.pkg.tar.gz
-rw-r--r-- 1 root root 90713 Jan 22 12:44 telepathy-butterfly-0.5.4-1-x86_64.pkg.tar.gz
-rw-r--r-- 1 root root 91638 Jan 22 12:44 telepathy-farsight-0.0.13-1-x86_64.pkg.tar.gz
-rw-r--r-- 1 root root 59389702 Jan 22 12:45 texlive-core-2009.16776-1-any.pkg.tar.gz
-rw-r--r-- 1 root root 724633 Jan 22 16:21 vte-0.22.5-1-x86_64.pkg.tar.gz
-rw-r--r-- 1 root root 437432 Jan 22 16:21 kiwi-1.9.26-1-x86_64.pkg.tar.gz
-rw-r--r-- 1 root root 791323 Jan 22 16:21 pida-0.5.1-4.pkg.tar.gz
-rw-r--r-- 1 root root 1130262 Jan 22 17:13 gstreamer0.10-good-0.10.17-1-x86_64.pkg.tar.gz
-rw-r--r-- 1 root root 74105 Jan 22 17:13 libraw1394-2.0.5-1-x86_64.pkg.tar.gz
-rw-r--r-- 1 root root 42225 Jan 22 17:13 libavc1394-0.5.3-3-x86_64.pkg.tar.gz
-rw-r--r-- 1 root root 62671 Jan 22 17:13 libiec61883-1.2.0-1-x86_64.pkg.tar.gz
-rw-r--r-- 1 root root 170815 Jan 22 17:13 libdv-1.0.0-3-x86_64.pkg.tar.gz
-rw-r--r-- 1 root root 422345 Jan 22 17:13 gstreamer0.10-good-plugins-0.10.17-1-x86_64.pkg.tar.gz
-rw-r--r-- 1 root root 81028 Jan 22 18:57 dosfstools-3.0.7-1-x86_64.pkg.tar.gz
-rw-r--r-- 1 root root 1149011 Jan 22 21:40 gstreamer0.10-bad-0.10.17-3-x86_64.pkg.tar.gz
-rw-r--r-- 1 root root 66220 Jan 22 21:41 libusb1-1.0.6-1-x86_64.pkg.tar.gz
-rw-r--r-- 1 root root 240347 Jan 22 21:41 libdc1394-2.1.0-1-x86_64.pkg.tar.gz
-rw-r--r-- 1 root root 991392 Jan 22 21:41 exempi-2.1.1-1-x86_64.pkg.tar.gz
-rw-r--r-- 1 root root 204235 Jan 22 21:41 musicbrainz-2.1.5-2-x86_64.pkg.tar.gz
-rw-r--r-- 1 root root 79710 Jan 22 21:41 libcdaudio-0.99.12-3-x86_64.pkg.tar.gz
-rw-r--r-- 1 root root 1279260 Jan 22 21:41 mjpegtools-1.9.0-2-x86_64.pkg.tar.gz
-rw-r--r-- 1 root root 29116 Jan 22 21:41 liblrdf-0.4.0-6-x86_64.pkg.tar.gz
-rw-r--r-- 1 root root 107219 Jan 22 21:41 libofa-0.9.3-2-x86_64.pkg.tar.gz
-rw-r--r-- 1 root root 582288 Jan 22 21:41 gstreamer0.10-bad-plugins-0.10.17-3-x86_64.pkg.tar.gz
lspci -v gives
...03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
Subsystem: Dell Device 01f1
Flags: bus master, fast devsel, latency 64, IRQ 17
Memory at f9bfe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [40] Power Management version 2
Kernel driver in use: b44
Kernel modules: b44
dmesg | grep b44
gives:
b44 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
b44.c:v2.0
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
dhcpcd -nd eth0
gives:dhcpcd: version 5.1.4 starting
dhcpcd: eth0: executing `/usr/lib/dhcpcd/dhcpcd-run-hooks', reason PREINIT
dhcpcd: eth0: executing `/usr/lib/dhcpcd/dhcpcd-run-hooks', reason CARRIER
dhcpcd: eth0: reading lease `/var/lib/dhcpcd/dhcpcd-eth0.lease'
dhcpcd: eth0: broadcasting for a lease
dhcpcd: eth0: sending DHCP_DISCOVER (xid 0x20bdc1bd), next in 4.85 seconds
dhcpcd: eth0: sending DHCP_DISCOVER (xid 0x20bdc1bd), next in 7.49 seconds
dhcpcd: eth0: sending DHCP_DISCOVER (xid 0x20bdc1bd), next in 15.71 seconds
dhcpcd: eth0: sending DHCP_DISCOVER (xid 0x20bdc1bd), next in 32.74 seconds
dhcpcd: timed out
I tried also to increase timeout - don't work.
Additional info: wireless is working.
Ethernet card itself is working (cheked while booting from cd Knoppix\Ubuntu)
Downgrade of the kernel and firmware didn't help.
Last edited by comrad (2010-01-24 10:13:27)
I have allready found the solution on the forum:
http://bbs.archlinux.org/viewtopic.php?id=88663
rm /var/lib/dhcpcd/dhcpcd-eth0.lease
Similar Messages
-
[SOLVED?] Problem with nVidia card
This is my first post, so; hello to everyone!! Thx in advance to this great community!!
My problem is pretty strange and anoying. I have an nVidia 8600GT in a Abit AX78 MB running Arch with KDE. Anything is going right until logon process. I write the user and password in KDM screen and then, after de animation of init proces of KDE, all graphics displayed are corrupted (a rectangle in the upper left corner is showed) and that's it. Only work the mouse pointer.
This malfunction its showed by the nouveau driver AND the proprietary driver... So i think the problem is it in other place than the driver of the card.
The Xorg.0.log and dmesg.log files are atached at the end of this thread.
I hope that annyone can help me.
Thx in advance again.
The Xorg.0.log file contains this:
[ 15.809]
X.Org X Server 1.10.3
Release Date: 2011-07-08
[ 15.814] X Protocol Version 11, Revision 0
[ 15.814] Build Operating System: Linux 2.6.39-ARCH i686
[ 15.814] Current Operating System: Linux hidramedia_host 2.6.39-ARCH #1 SMP PREEMPT Sat Jul 9 15:31:04 CEST 2011 i686
[ 15.815] Kernel command line: root=/dev/sda5 ro
[ 15.815] Build Date: 09 July 2011 07:57:07AM
[ 15.815]
[ 15.815] Current version of pixman: 0.22.2
[ 15.815] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 15.815] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 15.815] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 1 14:13:23 2011
[ 15.829] (==) Using config file: "/etc/X11/xorg.conf"
[ 15.829] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 15.835] (==) ServerLayout "Layout0"
[ 15.835] (**) |-->Screen "Screen0" (0)
[ 15.835] (**) | |-->Monitor "Monitor0"
[ 15.836] (**) | |-->Device "Device0"
[ 15.836] (**) |-->Input Device "Keyboard0"
[ 15.836] (**) |-->Input Device "Mouse0"
[ 15.836] (==) Automatically adding devices
[ 15.836] (==) Automatically enabling devices
[ 15.859] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 15.859] Entry deleted from font path.
[ 15.859] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 15.859] Entry deleted from font path.
[ 15.859] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 15.859] Entry deleted from font path.
[ 15.859] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 15.859] Entry deleted from font path.
[ 15.859] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 15.859] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 15.859] Entry deleted from font path.
[ 15.859] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 15.859] (==) FontPath set to:
/usr/share/fonts/misc/
[ 15.859] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 15.859] (**) Extension "Composite" is disabled
[ 15.859] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 15.859] (WW) Disabling Keyboard0
[ 15.859] (WW) Disabling Mouse0
[ 15.859] (II) Loader magic: 0x822e1a0
[ 15.859] (II) Module ABI versions:
[ 15.859] X.Org ANSI C Emulation: 0.4
[ 15.859] X.Org Video Driver: 10.0
[ 15.859] X.Org XInput driver : 12.2
[ 15.859] X.Org Server Extension : 5.0
[ 15.860] (--) PCI:*(0:1:0:0) 10de:0402:0000:0000 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000df00/128, BIOS @ 0x????????/131072
[ 15.860] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 15.860] (II) LoadModule: "extmod"
[ 15.871] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 15.880] (II) Module extmod: vendor="X.Org Foundation"
[ 15.880] compiled for 1.10.3, module version = 1.0.0
[ 15.880] Module class: X.Org Server Extension
[ 15.880] ABI class: X.Org Server Extension, version 5.0
[ 15.880] (II) Loading extension MIT-SCREEN-SAVER
[ 15.880] (II) Loading extension XFree86-VidModeExtension
[ 15.880] (II) Loading extension XFree86-DGA
[ 15.880] (II) Loading extension DPMS
[ 15.880] (II) Loading extension XVideo
[ 15.880] (II) Loading extension XVideo-MotionCompensation
[ 15.880] (II) Loading extension X-Resource
[ 15.880] (II) LoadModule: "dbe"
[ 15.880] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 15.881] (II) Module dbe: vendor="X.Org Foundation"
[ 15.881] compiled for 1.10.3, module version = 1.0.0
[ 15.881] Module class: X.Org Server Extension
[ 15.881] ABI class: X.Org Server Extension, version 5.0
[ 15.881] (II) Loading extension DOUBLE-BUFFER
[ 15.881] (II) LoadModule: "glx"
[ 15.881] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 16.640] (II) Module glx: vendor="NVIDIA Corporation"
[ 16.640] compiled for 4.0.2, module version = 1.0.0
[ 16.640] Module class: X.Org Server Extension
[ 16.640] (II) NVIDIA GLX Module 275.21 Mon Jul 18 14:55:52 PDT 2011
[ 16.640] (II) Loading extension GLX
[ 16.640] (II) LoadModule: "record"
[ 16.641] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 16.645] (II) Module record: vendor="X.Org Foundation"
[ 16.645] compiled for 1.10.3, module version = 1.13.0
[ 16.645] Module class: X.Org Server Extension
[ 16.645] ABI class: X.Org Server Extension, version 5.0
[ 16.645] (II) Loading extension RECORD
[ 16.645] (II) LoadModule: "dri"
[ 16.645] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 16.661] (II) Module dri: vendor="X.Org Foundation"
[ 16.661] compiled for 1.10.3, module version = 1.0.0
[ 16.661] ABI class: X.Org Server Extension, version 5.0
[ 16.661] (II) Loading extension XFree86-DRI
[ 16.661] (II) LoadModule: "dri2"
[ 16.661] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 16.662] (II) Module dri2: vendor="X.Org Foundation"
[ 16.662] compiled for 1.10.3, module version = 1.2.0
[ 16.662] ABI class: X.Org Server Extension, version 5.0
[ 16.662] (II) Loading extension DRI2
[ 16.662] (II) LoadModule: "nvidia"
[ 16.662] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 16.709] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 16.709] compiled for 4.0.2, module version = 1.0.0
[ 16.709] Module class: X.Org Video Driver
[ 16.732] (II) NVIDIA dlloader X Driver 275.21 Mon Jul 18 14:38:30 PDT 2011
[ 16.737] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 16.740] (++) using VT number 7
[ 16.751] (II) Loading sub module "fb"
[ 16.751] (II) LoadModule: "fb"
[ 16.751] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 16.762] (II) Module fb: vendor="X.Org Foundation"
[ 16.762] compiled for 1.10.3, module version = 1.0.0
[ 16.762] ABI class: X.Org ANSI C Emulation, version 0.4
[ 16.762] (II) Loading sub module "wfb"
[ 16.762] (II) LoadModule: "wfb"
[ 16.763] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 16.769] (II) Module wfb: vendor="X.Org Foundation"
[ 16.769] compiled for 1.10.3, module version = 1.0.0
[ 16.769] ABI class: X.Org ANSI C Emulation, version 0.4
[ 16.769] (II) Loading sub module "ramdac"
[ 16.769] (II) LoadModule: "ramdac"
[ 16.769] (II) Module "ramdac" already built-in
[ 16.771] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 16.771] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 16.771] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 16.780] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 16.780] (==) NVIDIA(0): RGB weight 888
[ 16.780] (==) NVIDIA(0): Default visual is TrueColor
[ 16.780] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 17.785] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 17.785] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 17.789] (II) NVIDIA(0): NVIDIA GPU GeForce 8600 GT (G84) at PCI:1:0:0 (GPU-0)
[ 17.789] (--) NVIDIA(0): Memory: 262144 kBytes
[ 17.789] (--) NVIDIA(0): VideoBIOS: 60.84.35.00.00
[ 17.789] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 17.789] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 17.789] (--) NVIDIA(0): Connected display device(s) on GeForce 8600 GT at PCI:1:0:0
[ 17.789] (--) NVIDIA(0): Samsung SyncMaster (CRT-0)
[ 17.789] (--) NVIDIA(0): Samsung SyncMaster (CRT-0): 400.0 MHz maximum pixel clock
[ 17.859] (II) NVIDIA(0): Assigned Display Device: CRT-0
[ 17.859] (==) NVIDIA(0):
[ 17.859] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 17.859] (==) NVIDIA(0): will be used as the requested mode.
[ 17.859] (==) NVIDIA(0):
[ 17.859] (II) NVIDIA(0): Validated modes:
[ 17.859] (II) NVIDIA(0): "nvidia-auto-select"
[ 17.859] (II) NVIDIA(0): Virtual screen size determined to be 800 x 600
[ 17.900] (--) NVIDIA(0): DPI set to (72, 72); computed from "UseEdidDpi" X config
[ 17.900] (--) NVIDIA(0): option
[ 17.900] (--) Depth 24 pixmap format is 32 bpp
[ 17.901] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 17.905] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 17.905] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 17.905] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 17.905] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 17.905] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 17.905] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 17.905] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 17.905] (II) NVIDIA(0): Config Options in the README.
[ 17.908] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 17.946] (II) Loading extension NV-GLX
[ 18.001] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 18.002] (==) NVIDIA(0): Backing store disabled
[ 18.002] (==) NVIDIA(0): Silken mouse enabled
[ 18.002] (**) NVIDIA(0): DPMS enabled
[ 18.002] (II) Loading extension NV-CONTROL
[ 18.003] (II) Loading extension XINERAMA
[ 18.003] (II) Loading sub module "dri2"
[ 18.003] (II) LoadModule: "dri2"
[ 18.003] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 18.003] (II) Module dri2: vendor="X.Org Foundation"
[ 18.003] compiled for 1.10.3, module version = 1.2.0
[ 18.003] ABI class: X.Org Server Extension, version 5.0
[ 18.003] (II) NVIDIA(0): [DRI2] Setup complete
[ 18.003] (==) RandR enabled
[ 18.003] (II) Initializing built-in extension Generic Event Extension
[ 18.003] (II) Initializing built-in extension SHAPE
[ 18.003] (II) Initializing built-in extension MIT-SHM
[ 18.003] (II) Initializing built-in extension XInputExtension
[ 18.003] (II) Initializing built-in extension XTEST
[ 18.003] (II) Initializing built-in extension BIG-REQUESTS
[ 18.003] (II) Initializing built-in extension SYNC
[ 18.003] (II) Initializing built-in extension XKEYBOARD
[ 18.003] (II) Initializing built-in extension XC-MISC
[ 18.003] (II) Initializing built-in extension SECURITY
[ 18.003] (II) Initializing built-in extension XINERAMA
[ 18.003] (II) Initializing built-in extension XFIXES
[ 18.003] (II) Initializing built-in extension RENDER
[ 18.003] (II) Initializing built-in extension RANDR
[ 18.003] (II) Initializing built-in extension COMPOSITE
[ 18.003] (II) Initializing built-in extension DAMAGE
[ 18.005] (II) Initializing extension GLX
[ 18.213] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 18.213] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 18.213] (II) LoadModule: "evdev"
[ 18.213] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.214] (II) Module evdev: vendor="X.Org Foundation"
[ 18.214] compiled for 1.10.0, module version = 2.6.0
[ 18.214] Module class: X.Org XInput Driver
[ 18.214] ABI class: X.Org XInput driver, version 12.2
[ 18.214] (II) Using input driver 'evdev' for 'Power Button'
[ 18.214] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.214] (**) Power Button: always reports core events
[ 18.214] (**) Power Button: Device: "/dev/input/event3"
[ 18.226] (--) Power Button: Found keys
[ 18.226] (II) Power Button: Configuring as keyboard
[ 18.226] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 18.226] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 18.226] (**) Option "xkb_rules" "evdev"
[ 18.226] (**) Option "xkb_model" "evdev"
[ 18.226] (**) Option "xkb_layout" "us"
[ 18.252] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 18.252] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 18.252] (II) Using input driver 'evdev' for 'Power Button'
[ 18.252] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.252] (**) Power Button: always reports core events
[ 18.252] (**) Power Button: Device: "/dev/input/event2"
[ 18.266] (--) Power Button: Found keys
[ 18.266] (II) Power Button: Configuring as keyboard
[ 18.266] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 18.266] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 18.266] (**) Option "xkb_rules" "evdev"
[ 18.266] (**) Option "xkb_model" "evdev"
[ 18.266] (**) Option "xkb_layout" "us"
[ 18.271] (II) config/udev: Adding input device Primax Electronics Wireless Mouse (/dev/input/event1)
[ 18.271] (**) Primax Electronics Wireless Mouse: Applying InputClass "evdev pointer catchall"
[ 18.271] (II) Using input driver 'evdev' for 'Primax Electronics Wireless Mouse'
[ 18.271] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.271] (**) Primax Electronics Wireless Mouse: always reports core events
[ 18.271] (**) Primax Electronics Wireless Mouse: Device: "/dev/input/event1"
[ 18.283] (--) Primax Electronics Wireless Mouse: Found 3 mouse buttons
[ 18.283] (--) Primax Electronics Wireless Mouse: Found scroll wheel(s)
[ 18.283] (--) Primax Electronics Wireless Mouse: Found relative axes
[ 18.283] (--) Primax Electronics Wireless Mouse: Found x and y relative axes
[ 18.283] (II) Primax Electronics Wireless Mouse: Configuring as mouse
[ 18.283] (II) Primax Electronics Wireless Mouse: Adding scrollwheel support
[ 18.283] (**) Primax Electronics Wireless Mouse: YAxisMapping: buttons 4 and 5
[ 18.283] (**) Primax Electronics Wireless Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 18.283] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.4/usb6/6-2/6-2:1.0/input/input1/event1"
[ 18.283] (II) XINPUT: Adding extended input device "Primax Electronics Wireless Mouse" (type: MOUSE)
[ 18.283] (II) Primax Electronics Wireless Mouse: initialized for relative axes.
[ 18.283] (**) Primax Electronics Wireless Mouse: (accel) keeping acceleration scheme 1
[ 18.283] (**) Primax Electronics Wireless Mouse: (accel) acceleration profile 0
[ 18.283] (**) Primax Electronics Wireless Mouse: (accel) acceleration factor: 2.000
[ 18.283] (**) Primax Electronics Wireless Mouse: (accel) acceleration threshold: 4
[ 18.283] (II) config/udev: Adding input device Primax Electronics Wireless Mouse (/dev/input/mouse0)
[ 18.283] (II) No input driver/identifier specified (ignoring)
[ 18.285] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[ 18.285] (II) No input driver/identifier specified (ignoring)
[ 18.285] (II) config/udev: Adding input device HDA ATI SB Headphone (/dev/input/event6)
[ 18.285] (II) No input driver/identifier specified (ignoring)
[ 18.286] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 18.286] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 18.286] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 18.286] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.286] (**) AT Translated Set 2 keyboard: always reports core events
[ 18.286] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 18.300] (--) AT Translated Set 2 keyboard: Found keys
[ 18.300] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 18.300] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 18.300] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 18.300] (**) Option "xkb_rules" "evdev"
[ 18.300] (**) Option "xkb_model" "evdev"
[ 18.300] (**) Option "xkb_layout" "us"
[ 18.300] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 18.300] (II) No input driver/identifier specified (ignoring)
[ 1563.531] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 1563.587] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 1563.587] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 1563.587] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 1563.587] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 1563.587] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 1563.587] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 1563.587] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 1563.587] (II) NVIDIA(0): Config Options in the README.
And the dmesg.log file contains this:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.39-ARCH (thomas@evey) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Sat Jul 9 15:31:04 CEST 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
[ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.5 present.
[ 0.000000] DMI: . ./AX78(AMD770+SB600), BIOS 6.00 PG 01/17/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7fff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-CFFFF uncachable
[ 0.000000] D0000-D3FFF write-back
[ 0.000000] D4000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00f41f0] f41f0
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 7fdc9000 - 7ffe0000
[ 0.000000] Allocated new RAMDISK: 375e7000 - 377fd792
[ 0.000000] Move RAMDISK from 000000007fdc9000 - 000000007ffdf791 to 375e7000 - 377fd791
[ 0.000000] ACPI: RSDP 000f81d0 00024 (v02 AMD770)
[ 0.000000] ACPI: RSDT 7fff3000 00038 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 7fff3080 00074 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 7fff3100 051E2 (v01 AMD770 AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 7fff0000 00040
[ 0.000000] ACPI: SSDT 7fff83c0 002CC (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 7fff86c0 00038 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000098)
[ 0.000000] ACPI: MCFG 7fff8700 0003C (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 7fff8300 00084 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1159MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fff0
[ 0.000000] On node 0 totalpages: 524159
[ 0.000000] free_area_init_node: node 0, pgdat c14a1980, node_mem_map f65e6200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2320 pages used for memmap
[ 0.000000] HighMem zone: 294626 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s27648 r0 d21504 u1048576
[ 0.000000] pcpu-alloc: s27648 r0 d21504 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520063
[ 0.000000] Kernel command line: root=/dev/sda5 ro
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 8388096 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007fff0)
[ 0.000000] Memory: 2062632k/2097088k available (3376k kernel code, 34004k reserved, 1390k data, 512k init, 1187784k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc14a8000 - 0xc1528000 ( 512 kB)
[ 0.000000] .data : 0xc134c3bf - 0xc14a7c00 (1390 kB)
[ 0.000000] .text : 0xc1000000 - 0xc134c3bf (3376 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:512
[ 0.000000] CPU 0 irqstacks, hard=f540c000 soft=f540e000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: Unable to calibrate against PIT
[ 0.000000] TSC: using HPET reference calibration
[ 0.000000] Detected 2700.236 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.016736] Calibrating delay loop (skipped), value calculated using timer frequency.. 5402.49 BogoMIPS (lpj=9000786)
[ 0.016870] pid_max: default: 32768 minimum: 301
[ 0.016983] Security Framework initialized
[ 0.017051] AppArmor: AppArmor disabled by boot time parameter
[ 0.017144] Mount-cache hash table entries: 512
[ 0.017404] Initializing cgroup subsys ns
[ 0.017471] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.017549] Initializing cgroup subsys cpuacct
[ 0.017625] Initializing cgroup subsys memory
[ 0.017701] Initializing cgroup subsys devices
[ 0.017767] Initializing cgroup subsys freezer
[ 0.017833] Initializing cgroup subsys net_cls
[ 0.017899] Initializing cgroup subsys blkio
[ 0.017995] CPU: Physical Processor ID: 0
[ 0.018060] CPU: Processor Core ID: 0
[ 0.018126] mce: CPU supports 5 MCE banks
[ 0.018199] using C1E aware idle routine
[ 0.019127] ACPI: Core revision 20110316
[ 0.023362] ftrace: allocating 15225 entries in 30 pages
[ 0.026734] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.027332] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061631] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02
[ 0.063329] Performance Events: AMD PMU driver.
[ 0.063329] ... version: 0
[ 0.063329] ... bit width: 48
[ 0.063329] ... generic registers: 4
[ 0.063329] ... value mask: 0000ffffffffffff
[ 0.063329] ... max period: 00007fffffffffff
[ 0.063329] ... fixed-purpose events: 0
[ 0.063329] ... event mask: 000000000000000f
[ 0.080086] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.106674] CPU 1 irqstacks, hard=f54b4000 soft=f54b6000
[ 0.106676] Booting Node 0, Processors #1
[ 0.106783] smpboot cpu 1: start_ip = 9b000
[ 0.019998] Initializing CPU#1
[ 0.200085] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.206657] Brought up 2 CPUs
[ 0.206721] Total of 2 processors activated (10805.88 BogoMIPS).
[ 0.207206] devtmpfs: initialized
[ 0.207206] PM: Registering ACPI NVS region at 7fff0000 (12288 bytes)
[ 0.207649] print_constraints: dummy:
[ 0.207764] NET: Registered protocol family 16
[ 0.207919] node 0 link 0: io port [c000, ffff]
[ 0.207922] TOM: 0000000080000000 aka 2048M
[ 0.207987] node 0 link 0: mmio [a0000, bffff]
[ 0.207990] node 0 link 0: mmio [80000000, dfffffff]
[ 0.207992] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.207995] node 0 link 0: mmio [e0000000, e03fffff]
[ 0.207997] bus: [00, 03] on node 0 link 0
[ 0.208000] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.208002] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.208003] bus: 00 index 2 [mem 0x80000000-0xefffffff]
[ 0.208005] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
[ 0.208011] ACPI: bus type pci registered
[ 0.208149] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.208227] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.208292] PCI: Using MMCONFIG for extended config space
[ 0.208357] PCI: Using configuration type 1 for base access
[ 0.208842] bio: create slab <bio-0> at 0
[ 0.210574] ACPI: EC: Look up EC in DSDT
[ 0.211181] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.214150] ACPI: Interpreter enabled
[ 0.214220] ACPI: (supports S0 S3 S4 S5)
[ 0.214501] ACPI: Using IOAPIC for interrupt routing
[ 0.225790] ACPI: No dock devices found.
[ 0.225854] HEST: Table not found.
[ 0.225919] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.226037] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.226190] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.226257] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.226324] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.226399] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.226474] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xffffffff]
[ 0.226562] pci 0000:00:00.0: [1002:5957] type 0 class 0x000600
[ 0.226576] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.226609] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
[ 0.226636] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.226639] pci 0000:00:02.0: PME# disabled
[ 0.226667] pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604
[ 0.226693] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.226696] pci 0000:00:0a.0: PME# disabled
[ 0.226723] pci 0000:00:12.0: [1002:4380] type 0 class 0x000106
[ 0.226742] pci 0000:00:12.0: reg 10: [io 0xff00-0xff07]
[ 0.226752] pci 0000:00:12.0: reg 14: [io 0xfe00-0xfe03]
[ 0.226763] pci 0000:00:12.0: reg 18: [io 0xfd00-0xfd07]
[ 0.226773] pci 0000:00:12.0: reg 1c: [io 0xfc00-0xfc03]
[ 0.226784] pci 0000:00:12.0: reg 20: [io 0xfb00-0xfb0f]
[ 0.226794] pci 0000:00:12.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.226836] pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03
[ 0.226851] pci 0000:00:13.0: reg 10: [mem 0xfe02e000-0xfe02efff]
[ 0.226919] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03
[ 0.226933] pci 0000:00:13.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
[ 0.227002] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03
[ 0.227016] pci 0000:00:13.2: reg 10: [mem 0xfe02c000-0xfe02cfff]
[ 0.227084] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03
[ 0.227099] pci 0000:00:13.3: reg 10: [mem 0xfe02b000-0xfe02bfff]
[ 0.227166] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03
[ 0.227181] pci 0000:00:13.4: reg 10: [mem 0xfe02a000-0xfe02afff]
[ 0.227255] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03
[ 0.227275] pci 0000:00:13.5: reg 10: [mem 0xfe029000-0xfe0290ff]
[ 0.227351] pci 0000:00:13.5: supports D1 D2
[ 0.227352] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.227357] pci 0000:00:13.5: PME# disabled
[ 0.227379] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.227402] pci 0000:00:14.0: reg 10: [io 0x0b00-0x0b0f]
[ 0.227483] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101
[ 0.227497] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.227507] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.227518] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.227528] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.227538] pci 0000:00:14.1: reg 20: [io 0xf900-0xf90f]
[ 0.227577] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.227600] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.227663] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.227667] pci 0000:00:14.2: PME# disabled
[ 0.227681] pci 0000:00:14.3: [1002:438d] type 0 class 0x000601
[ 0.227759] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.227808] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.227823] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.227835] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.227848] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.227903] pci 0000:01:00.0: [10de:0402] type 0 class 0x000300
[ 0.227914] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[ 0.227926] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.227937] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
[ 0.227945] pci 0000:01:00.0: reg 24: [io 0xdf00-0xdf7f]
[ 0.227953] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.233329] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.233396] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.233399] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.233404] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.233444] pci 0000:02:00.0: [11ab:4364] type 0 class 0x000200
[ 0.233462] pci 0000:02:00.0: reg 10: [mem 0xfdffc000-0xfdffffff 64bit]
[ 0.233472] pci 0000:02:00.0: reg 18: [io 0xee00-0xeeff]
[ 0.233505] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.233535] pci 0000:02:00.0: supports D1 D2
[ 0.233537] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.233541] pci 0000:02:00.0: PME# disabled
[ 0.239995] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.240062] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.240065] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.240069] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.240134] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.240203] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.240207] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.240212] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
[ 0.240214] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.240217] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.240219] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.240221] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.240224] pci 0000:00:14.4: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
[ 0.240236] pci_bus 0000:00: on NUMA node 0
[ 0.240239] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.240363] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.240408] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.240440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.240465] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.240531] Unable to assume _OSC PCIe control. Disabling ASPM
[ 0.251996] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.252665] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.253351] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.254017] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.254684] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.255350] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.257059] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.257725] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.258446] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.258522] vgaarb: loaded
[ 0.258678] PCI: Using ACPI for IRQ routing
[ 0.258742] PCI: pci_cache_line_size set to 64 bytes
[ 0.258749] pci 0000:00:00.0: address space collision: [mem 0xe0000000-0xffffffff 64bit] conflicts with PCI Bus 0000:01 [mem 0xf8000000-0xfbffffff]
[ 0.258890] reserve RAM buffer: 000000000009f400 - 000000000009ffff
[ 0.258893] reserve RAM buffer: 000000007fff0000 - 000000007fffffff
[ 0.259004] NetLabel: Initializing
[ 0.259067] NetLabel: domain hash size = 128
[ 0.259131] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.259205] NetLabel: unlabeled traffic allowed by default
[ 0.259287] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.259608] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.261015] Switching to clocksource hpet
[ 0.261499] Switched to NOHz mode on CPU #0
[ 0.261582] Switched to NOHz mode on CPU #1
[ 0.266362] pnp: PnP ACPI init
[ 0.266443] ACPI: bus type pnp registered
[ 0.266593] pnp 00:00: [bus 00-ff]
[ 0.266598] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.266600] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.266602] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.266604] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.266606] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.266609] pnp 00:00: [mem 0x80000000-0xffffffff window]
[ 0.266662] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.266792] pnp 00:01: [io 0x4100-0x411f]
[ 0.266794] pnp 00:01: [io 0x0228-0x022f]
[ 0.266796] pnp 00:01: [io 0x040b]
[ 0.266798] pnp 00:01: [io 0x04d6]
[ 0.266799] pnp 00:01: [io 0x0c00-0x0c01]
[ 0.266801] pnp 00:01: [io 0x0c14]
[ 0.266803] pnp 00:01: [io 0x0c50-0x0c52]
[ 0.266805] pnp 00:01: [io 0x0c6c-0x0c6d]
[ 0.266807] pnp 00:01: [io 0x0c6f]
[ 0.266808] pnp 00:01: [io 0x0cd0-0x0cd1]
[ 0.266810] pnp 00:01: [io 0x0cd2-0x0cd3]
[ 0.266812] pnp 00:01: [io 0x0cd4-0x0cdf]
[ 0.266814] pnp 00:01: [io 0x4000-0x40fe]
[ 0.266815] pnp 00:01: [io 0x4210-0x4217]
[ 0.266817] pnp 00:01: [io 0x0b10-0x0b1f]
[ 0.266819] pnp 00:01: [mem 0x00000000-0x00000fff window]
[ 0.266822] pnp 00:01: [mem 0xfee00400-0xfee00fff window]
[ 0.266828] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.266939] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.267023] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.267131] system 00:01: [io 0x4100-0x411f] has been reserved
[ 0.267198] system 00:01: [io 0x0228-0x022f] has been reserved
[ 0.267264] system 00:01: [io 0x040b] has been reserved
[ 0.267330] system 00:01: [io 0x04d6] has been reserved
[ 0.267395] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.267461] system 00:01: [io 0x0c14] has been reserved
[ 0.267530] system 00:01: [io 0x0c50-0x0c52] has been reserved
[ 0.267596] system 00:01: [io 0x0c6c-0x0c6d] has been reserved
[ 0.267662] system 00:01: [io 0x0c6f] has been reserved
[ 0.267727] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.267793] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.267859] system 00:01: [io 0x0cd4-0x0cdf] has been reserved
[ 0.267926] system 00:01: [io 0x4000-0x40fe] has been reserved
[ 0.267992] system 00:01: [io 0x4210-0x4217] has been reserved
[ 0.268058] system 00:01: [io 0x0b10-0x0b1f] has been reserved
[ 0.268125] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.268201] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.268290] pnp 00:02: [dma 4]
[ 0.268291] pnp 00:02: [io 0x0000-0x000f]
[ 0.268293] pnp 00:02: [io 0x0080-0x0090]
[ 0.268295] pnp 00:02: [io 0x0094-0x009f]
[ 0.268297] pnp 00:02: [io 0x00c0-0x00df]
[ 0.268326] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.268366] pnp 00:03: [irq 0 disabled]
[ 0.268380] pnp 00:03: [irq 8]
[ 0.268382] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.268408] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.268430] pnp 00:04: [io 0x0070-0x0073]
[ 0.268456] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.268463] pnp 00:05: [io 0x0061]
[ 0.268488] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.268495] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.268504] pnp 00:06: [irq 13]
[ 0.268535] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.268566] pnp 00:07: [io 0x0010-0x001f]
[ 0.268567] pnp 00:07: [io 0x0022-0x003f]
[ 0.268569] pnp 00:07: [io 0x0044-0x005f]
[ 0.268571] pnp 00:07: [io 0x0062-0x0063]
[ 0.268573] pnp 00:07: [io 0x0065-0x006f]
[ 0.268575] pnp 00:07: [io 0x0074-0x007f]
[ 0.268576] pnp 00:07: [io 0x0091-0x0093]
[ 0.268578] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.268580] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.268582] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.268632] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.268699] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.269033] pnp 00:08: [io 0x0060]
[ 0.269034] pnp 00:08: [io 0x0064]
[ 0.269043] pnp 00:08: [irq 1]
[ 0.269080] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.269127] pnp 00:09: [mem 0x000f0000-0x000fffff]
[ 0.269129] pnp 00:09: [mem 0x00000000-0x001fffff]
[ 0.269131] pnp 00:09: [mem 0xfed00000-0xfed000ff]
[ 0.269132] pnp 00:09: [mem 0x7fff0000-0x7fffffff]
[ 0.269134] pnp 00:09: [mem 0xffff0000-0xffffffff]
[ 0.269136] pnp 00:09: [mem 0x00000000-0x0009ffff]
[ 0.269138] pnp 00:09: [mem 0x00100000-0x7ffeffff]
[ 0.269140] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[ 0.269142] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[ 0.269144] pnp 00:09: [mem 0xfff80000-0xfffeffff]
[ 0.269148] pnp 00:09: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.269229] pnp 00:09: disabling [mem 0x00000000-0x001fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.269309] pnp 00:09: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.269390] pnp 00:09: disabling [mem 0x00100000-0x7ffeffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.269519] system 00:09: [mem 0xfed00000-0xfed000ff] has been reserved
[ 0.269587] system 00:09: [mem 0x7fff0000-0x7fffffff] could not be reserved
[ 0.269654] system 00:09: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.269721] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.269788] system 00:09: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.269855] system 00:09: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.269922] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.269930] pnp: PnP ACPI: found 10 devices
[ 0.269994] ACPI: ACPI bus type pnp unregistered
[ 0.306168] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref]
[ 0.306245] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.306311] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.306378] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.306445] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.306523] pci 0000:02:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
[ 0.306598] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.306664] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.306741] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.306809] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.306886] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 0.306952] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.307022] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.307090] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
[ 0.307175] pci 0000:00:02.0: setting latency timer to 64
[ 0.307180] pci 0000:00:0a.0: setting latency timer to 64
[ 0.307188] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.307190] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.307192] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.307194] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.307197] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff]
[ 0.307199] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.307201] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.307203] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.307206] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.307208] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff]
[ 0.307210] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.307213] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.307215] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.307217] pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
[ 0.307219] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.307222] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.307224] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.307226] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.307228] pci_bus 0000:03: resource 8 [mem 0x80000000-0xffffffff]
[ 0.307274] NET: Registered protocol family 2
[ 0.307398] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.307694] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.308325] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.308652] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.308719] TCP reno registered
[ 0.308783] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.308856] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.309050] NET: Registered protocol family 1
[ 0.426742] pci 0000:01:00.0: Boot video device
[ 0.426749] PCI: CLS 64 bytes, default 64
[ 0.426800] Unpacking initramfs...
[ 0.460291] Freeing initrd memory: 2140k freed
[ 0.461639] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 0.461707] apm: disabled - APM is not SMP safe.
[ 0.461884] audit: initializing netlink socket (disabled)
[ 0.461957] type=2000 audit(1312207987.459:1): initialized
[ 0.462290] highmem bounce pool size: 64 pages
[ 0.462357] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.464180] VFS: Disk quotas dquot_6.5.2
[ 0.464312] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.464469] msgmni has been set to 1712
[ 0.464730] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.464841] io scheduler noop registered
[ 0.464907] io scheduler deadline registered
[ 0.464983] io scheduler cfq registered (default)
[ 0.465152] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.465180] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.465225] pcieport 0000:00:0a.0: setting latency timer to 64
[ 0.465246] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
[ 0.465393] ERST: Table is not found!
[ 0.465467] isapnp: Scanning for PnP cards...
[ 0.822554] isapnp: No Plug & Play device found
[ 0.822675] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.050031] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.050099] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.050669] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.050792] mousedev: PS/2 mouse device common for all mice
[ 1.050892] rtc_cmos 00:04: RTC can wake from S4
[ 1.074526] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.076767] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.076869] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.076954] cpuidle: using governor ladder
[ 1.077018] cpuidle: using governor menu
[ 1.077281] TCP cubic registered
[ 1.077345] NET: Registered protocol family 17
[ 1.077415] Registering the dns_resolver key type
[ 1.077492] Using IPI No-Shortcut mode
[ 1.077626] PM: Hibernation image not present or could not be loaded.
[ 1.077633] registered taskstats version 1
[ 1.077987] rtc_cmos 00:04: setting system clock to 2011-08-01 14:13:08 UTC (1312207988)
[ 1.078086] Initializing network drop monitor service
[ 1.078222] Freeing unused kernel memory: 512k freed
[ 1.078587] Write protecting the kernel text: 3380k
[ 1.078672] Write protecting the kernel read-only data: 1028k
[ 1.088713] udevd[47]: starting version 171
[ 1.180160] SCSI subsystem initialized
[ 1.197209] usbcore: registered new interface driver usbfs
[ 1.197412] usbcore: registered new interface driver hub
[ 1.197625] usbcore: registered new device driver usb
[ 1.215729] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.215840] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.215930] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 1.216028] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[ 1.226748] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 1.226842] ehci_hcd 0000:00:13.5: debug port 1
[ 1.226937] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
[ 1.237087] libata version 3.00 loaded.
[ 1.240040] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 1.240292] hub 1-0:1.0: USB hub found
[ 1.240359] hub 1-0:1.0: 10 ports detected
[ 1.240733] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.241613] scsi0 : pata_atiixp
[ 1.241804] scsi1 : pata_atiixp
[ 1.242405] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
[ 1.242472] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
[ 1.244130] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.244228] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.244315] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.244390] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 1.250091] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
[ 1.307508] hub 2-0:1.0: USB hub found
[ 1.307579] hub 2-0:1.0: 2 ports detected
[ 1.307730] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.307813] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.307889] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 1.326729] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
[ 1.384201] hub 3-0:1.0: USB hub found
[ 1.384274] hub 3-0:1.0: 2 ports detected
[ 1.384428] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.384511] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 1.384583] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 1.405209] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
[ 1.460849] hub 4-0:1.0: USB hub found
[ 1.460923] hub 4-0:1.0: 2 ports detected
[ 1.461068] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.461149] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 1.461220] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[ 1.480027] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
[ 1.537463] hub 5-0:1.0: USB hub found
[ 1.537533] hub 5-0:1.0: 2 ports detected
[ 1.537661] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.537735] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 1.537805] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[ 1.553363] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
[ 1.610820] hub 6-0:1.0: USB hub found
[ 1.610890] hub 6-0:1.0: 2 ports detected
[ 1.611025] ahci 0000:00:12.0: version 3.0
[ 1.611043] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.611127] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 1.611295] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.611377] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc
[ 1.612922] scsi2 : ahci
[ 1.613831] scsi3 : ahci
[ 1.614815] scsi4 : ahci
[ 1.614997] scsi5 : ahci
[ 1.615170] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[ 1.615247] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[ 1.615324] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[ 1.615400] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[ 1.933384] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.933527] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.063354] usb 6-2: new low speed USB device number 2 using ohci_hcd
[ 2.106684] ata3: softreset failed (device not ready)
[ 2.106751] ata3: applying SB600 PMP SRST workaround and retrying
[ 2.106831] ata4: softreset failed (device not ready)
[ 2.106897] ata4: applying SB600 PMP SRST workaround and retrying
[ 2.273373] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.273477] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.275971] ata4.00: ATAPI: HL-DT-ST DVDRAM GH20NS10, EL00, max UDMA/100
[ 2.276040] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.278897] ata3.00: ATA-7: SAMSUNG HD161HJ, JF100-19, max UDMA7
[ 2.278963] ata3.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.279030] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.279635] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.279701] ata4.00: configured for UDMA/100
[ 2.284467] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.284533] ata3.00: configured for UDMA/133
[ 2.284747] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD161HJ JF10 PQ: 0 ANSI: 5
[ 2.397145] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS10 EL00 PQ: 0 ANSI: 5
[ 2.407639] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.407755] sd 2:0:0:0: [sda] Write Protect is off
[ 2.407821] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.407838] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.411375] input: Primax Electronics Wireless Mouse as /devices/pci0000:00/0000:00:13.4/usb6/6-2/6-2:1.0/input/input1
[ 2.411568] generic-usb 0003:0461:4D25.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [Primax Electronics Wireless Mouse] on usb-0000:00:13.4-2/input0
[ 2.411669] usbcore: registered new interface driver usbhid
[ 2.411745] usbhid: USB HID core driver
[ 2.437927] sda: sda1 sda2 sda3 < sda5 >
[ 2.438378] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.518436] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.518516] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.518787] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.959493] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 4.003984] udevd[255]: starting version 171
[ 4.140765] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 4.140858] ACPI: Power Button [PWRB]
[ 4.140981] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.141058] ACPI: Power Button [PWRF]
[ 4.154881] Linux agpgart interface v0.103
[ 4.157785] ACPI: Fan [FAN] (on)
[ 4.158635] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 4.161972] ACPI: acpi_idle registered with cpuidle
[ 4.162457] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 4.228336] sky2: driver version 1.28
[ 4.228452] sky2 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.228527] sky2 0000:02:00.0: setting latency timer to 64
[ 4.228555] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 5
[ 4.228709] sky2 0000:02:00.0: irq 42 for MSI/MSI-X
[ 4.228991] sky2 0000:02:00.0: eth0: addr 00:50:8d:ba:48:da
[ 4.232113] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 4.250935] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 4.302867] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 4.356767] ACPI Warning: For \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference (20110316/nspredef-1059)
[ 4.356967] ACPI: Expecting a [Reference] package element, found type 0
[ 4.357033] ACPI: Invalid passive threshold
[ 4.363965] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 4.364111] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 4.476288] nvidia: module license 'NVIDIA' taints kernel.
[ 4.476360] Disabling lock debugging due to kernel taint
[ 4.556743] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.556813] ACPI: Thermal Zone [THRM] (44 C)
[ 4.691172] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.775620] hda_codec: ALC888: BIOS auto-probing.
[ 4.777062] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input5
[ 4.781547] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 5.638691] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.638769] nvidia 0000:01:00.0: setting latency timer to 64
[ 5.638774] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 5.639105] NVRM: loading NVIDIA UNIX x86 Kernel Module 275.21 Mon Jul 18 14:37:03 PDT 2011
[ 5.886530] EXT4-fs (sda5): re-mounted. Opts: (null)
[ 5.965890] Adding 996024k swap on /dev/sda2. Priority:-1 extents:1 across:996024k
Last edited by Fuentes (2011-08-16 22:44:13)the contents of /home/user/.xsession-errors
startkde: Starting up...
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
kbuildsycoca4 running...
kded(920) LayoutMemoryPersister::restoreFromFile: Failed to open layout memory xml file for reading "/home/alvaro/.kde4/share/apps/kded/session/keyboard/layout_memory.xml" error: 5
kded(920)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
No outputs have backlight property
QDBusConnection: name 'org.kde.kglobalaccel' had owner '' but we thought it was ':1.5'
kded(920) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed
Object::connect: No such signal QDBusAbstractInterface::Changed()
Invalid D-BUS member name 'idle-hint' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'is-local' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'x11-display-device' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'x11-display' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'display-device' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'remote-host-name' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'session-type' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'unix-user' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
QDBusObjectPath: invalid path ""
QDBusObjectPath: invalid path ""
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e00141
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0x8bf31cc
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e00141
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e00143
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e00143
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e00145
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e00145
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e00147
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e00147
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e00149
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e00149
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e0014b
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e0014b
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e0014d
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e0014d
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e0014f
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e0014f
Object::connect: No such signal QDBusAbstractInterface::Changed()
Object::connect: No such signal KWindowSystem::windowChanged(WId,unsigned long*)
kwin(977): Compositing is not possible
kwin(977): Compositing is not possible
kwin(977): Compositing is not possible
kded(920) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed
kded(920) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed
kded(920) PowerDevilUPowerBackend::setBrightness: org.kde.powerdevil.backlighthelper.setbrightness failed
kded(920) PowerDevilUPowerBackend::setBrightness: org.kde.powerdevil.backlighthelper.setbrightness failed
QProcess: Destroyed while process is still running.
plasma-desktop(1001): Communication problem with "plasma-desktop" , it probably crashed.
Error message was: "org.freedesktop.DBus.Error.Disconnected" : " "Connection was disconnected before a reply was received" "
kdeinit4: Fatal IO error: client killed
kdeinit4: sending SIGHUP to children.
klauncher: Exiting on signal 1
kglobalaccel: Fatal IO error: client killed
kdeinit4: Fatal IO error: client killed
kdeinit4: sending SIGHUP to children.
ksmserver: Fatal IO error: client killed
kdeinit4: sending SIGTERM to children.
kdeinit4: Exit.
kded4: Fatal IO error: client killed
kdeinit4: sending SIGTERM to children.
kdeinit4: Exit. -
Weird Problem with graphics card
I have a HPG42-478TX . Its about 2 years old.
I bought HP after a good review about compaq laptop my cousin bought( apparently its been 5 years and his works far reliable). But i guess i made a bad choice.
I am having a situation where i get BSOD about the graphics driver and then the screen is just gone and has no backlight.The fan keeps on running.
On pressing the power button it turns off and pressing it again to turn it on and will show nothing not even the backlight.
It does make a sound from the DVD drive which means its doing POST. But no display is there.
I recently found a way to start it after i accendently kept it running and it overheated.
After overheating i guess the chip inside is interrupted and it starts. I then start in "Safe Mode" and uninstall ( without deleting it) the display drivers and restart it.
It then restarts and detects the GPU and it works fine for a week or so and returns to the same state.
This cycle has been completed about 5-6 times now and i want a permanent solution.
Hope the community can help!!
TIA
This question was solved.
View Solution.Hello HardwareFreak,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are having issues with a driver that keeps installing (once a week by the looks of it) and it is resulting in a BSOD that you have to constantly recover from. I am providing you with a link to an HP Support document: Using HP Support Assistant (Windows 7) which I would like you to use to configure the HP Support Assistant to "Check all updates, but let me decide which ones to install". This will prevent the update from automatically updating and causing this issue again.
Next, I would like you to download and install the HP G42-478TX Notebook PC Drivers for your computer one at a time starting with the Chipset drivers. By doing it one at a time you will be able to determine which driver is causing you the trouble if any. Afterwards, you can re-set the Hp Support Assistant back to automatically installing the updates and see if the issue is resolved.
Please re-post if you require additional support. Thank you for posting this issue on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter -
help solve the problem, with the lifting of purchasing and payment card is locked, and now I can not pay for her purchases in the app store
Contact the App store for Apple ID help. Their support link is on the right of the App store window
LN -
Hi I tried to contact with Sydney Apple store but impossible so far. Actually I found my Visa card been conducted 4 transactions in 7th may. I am in Auckland that time. It must be wrong deduction. Can anyone help me solve this problem.
My card is visa the 4 transactions are:
$19.48, $19.48, $12.98 and $ 25.97
otherwise I need report to police.
Also please forward it to the related department please
Thanks
Kathy
Please
<Personal Information Edited by Host>You are not addressing Apple here - this is a technical forum and we are all other users here.
You should also not post private info in an open forum - it is too dangerous - I've asked the hosts to remove the financial info and your email address. Anyone on this forum will reply to this thread - no need for an email address.
As for the activity: please call your credit card company immediately to report and question the activity. They can get in touch with the vendor (Apple). Calling the police will not be very helpful. -
Apple Banned me, because of a very weird problem with my "Factory Unlocked"
Hi Everybody! Im having a very weird problem with my unlocked iphone 4.
First of all, i would like to apologize because of my english, is not very good. My native language is Spanish.
Well.. Im from Mexico, and here we can buy the iphone Unlocked on the Apple Online Store.
Here's my problem. Apple has exchanged my iphone 3 times.
I returned the iphone the first time because the screen was totally yellowish, other than that everything was working great!, that was by the end of September.
On October 20th, i recieved my second iphone, and then a bigger problem started .
Before i continue, let me give you this information: here in Mexico we have basically 3 cell phone companies
1.- Telcel
2.- Movistar
3.- Unefon
OK, now on october 20th, i recieved my second iphone, and then procced to activate via itunes using my UNEFON sim card (microsim).
And every time i tried to activate it, only got this message onscreen:
http://i148.photobucket.com/albums/s2/jorgelomeli/Screenshot2010-10-29at24915PM. png
I though something was wrong with my brand new factory unlocked iphone 4.
I have 4 more simcards from my brothers (they all had iphone 4 too)
I tried telcel sim card, and i could activate my iphone. Then i insterted the Movistar microsim, and it worked too!! But then when i put the Unefon sim, the itunes logo inmediatly appears on the screen asking to activate on itunes, and when i tried that, the only response i got was the image above saying " The Simcard inserted on this iphone does not appear to be supported"
Weird thing here is, that, when i put my Unefon sim card on my brothers iphone 4, it worked great! on all of them, internet 3g, phone, wireless , evrything!
I called apple support, and they exchange the iphone for another one.
I recieved the third iphone on October 29. Last friday. and guess what? SAME PROBLEM! different serial number, same week production (week 42) but exactly the same message on itunes.
Very, very frustrated, i called apple again, and after 1 hour with thechnical support, they told me " We are sorry, but we can only offer you, your money back, NO MORE EXCHANGES FOR YOU"
I said why?... i dont want my money back! i want an UNLOCKED iphone!, but they refuse to give me another iphone.
When i asked techincal support, why my unefon sim card worked great on all three of my brothers iphone but not on mine, he just told me, "I really dont know, i guess they just got lucky" ****, this answer put all my trust i had on apple products for years, right on the garbage.
Since they refused to give me another iphone, i accepted my money back, and inmediatly after i finished the call, i asked my brother to buy me one more time an iphone 4 using his name, and his credit card. Now i have to wait until November 8-12 to recieve my new iphone, hoping this time i get a REAL UNLOCKED iphone, and not a partially unlocked iphone.
btw. i even went to Unefon costumer service and bought a new prepiad line, with a new microsim, just to be 100% sure that this problem is not because of the sim. And again didnt worked on my iphone, but it worked on any of my brothers iphone4.
Serial numbers of the 3 iphones:
79039C0U* (this one worked great with Unefon, only problem was yellow screen)
85042GR4*
81042FJB*
What do you suggest me? any info would be really aprecciated
FYI i also restore 4 times the last iphone and nothing seemed to work, i use 3 different computers, Macbook Pro, iMac, and an Hp with Windows 7, and the same message on all three computers.
Wierd thing also, one of my brothers bougth an iphone 4 this last week too, but he bought the 16Gb not the 32Gb. His iphone production week is 42 also! and when i put my Unefon sim in his iphone works great!
I dont know what else i can do, I just need to have faith that my new iphone coming this november will be real unlocked, but what if i'll recieve an iphone and then the same problem?? time for android? just kidding really guys, what can i do? anyone with similar problem like me? i dont wanna use Telcel or Movistar, i wanna use Unefon, and thats why i bought an Unlocked iphone
btw: jailbreak is not a solution for me, because i always like to use legal software on all my apple products, and because of the warranty.According to http://support.apple.com/kb/HT1937, there are two official carriers in Mexico (Movistar and Telcel) and neither carrier offers an unlocked phone.
-
Weird problems with CSS being applied to JSF pages
I have this really weird problem with my CSS rules being applied to my JSF pages. My CSS rules don't get applied unless one of the following two things happen:
- A page is reloaded (by redirecting to itself, or if there were validation errors)
- The previous page in the history had the same relative reference to the same CSS file.
If a page is newly loaded, and the previous page did not have that same CSS reference, the CSS styles will not show up. Also, if the above is true, and the page is reloaded by JSF, the CSS styles show up.
Now, my problem could be solved if I put all JSP files in the same level, but the display of the first page would still be without the CSS style applied.
Is this known behaviour? And if it is, does it have anything to do do with the way JSF handles URLs (always one level back)? Help and input is kindly appreciated!Dude,
I tried the same
<link rel="stylesheet" href="<h:outputText value="#{facesContext.externalContext.requestContextPath}"/pages/css/default.css" />
and I got the following Jasper exception.... pointers plz ??
=============================================================
2005-08-24 14:18:55,937 [http-8080-Processor25] ERROR org.apache.catalina.core.ContainerBase.[Catalina].[localhost].[mydemo].[FacesServlet] - Servlet.service() for servlet FacesServlet threw exception
org.apache.jasper.JasperException: /myproj/eventCrit.jsp(8,78) Unterminated <h:outputText tag
at org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:39)
at org.apache.jasper.compiler.ErrorDispatcher.dispatch(ErrorDispatcher.java:405)
at org.apache.jasper.compiler.ErrorDispatcher.jspError(ErrorDispatcher.java:130)
at org.apache.jasper.compiler.Parser.parseOptionalBody(Parser.java:1049)
at org.apache.jasper.compiler.Parser.parseCustomTag(Parser.java:1367)
at org.apache.jasper.compiler.Parser.parseElements(Parser.java:1564)
at org.apache.jasper.compiler.Parser.parseBody(Parser.java:1793)
at org.apache.jasper.compiler.Parser.parseOptionalBody(Parser.java:1060)
at org.apache.jasper.compiler.Parser.parseCustomTag(Parser.java:1367)
at org.apache.jasper.compiler.Parser.parseElements(Parser.java:1564)
at org.apache.jasper.compiler.Parser.parse(Parser.java:126)
at org.apache.jasper.compiler.ParserController.doParse(ParserController.java:211)
at org.apache.jasper.compiler.ParserController.parse(ParserController.java:100)
at org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:146)
at org.apache.jasper.compiler.Compiler.compile(Compiler.java:286)
at org.apache.jasper.compiler.Compiler.compile(Compiler.java:267)
at org.apache.jasper.compiler.Compiler.compile(Compiler.java:255)
at org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:556)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:293)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:291)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:241)
========================================================= -
I'm with a weird problem with my OS Tiger. I have a G4/400 AGP Graphics with a Fastmac 1.5GHz processor upgrade, 1 GB RAM, 128MB video card, USB 2.0 card and a Sonnet serial ATA card. I have two HDs: one of 80GB and another one with 250GB (serial ATA) connected to the serial ATA card.
I have installed OS X Tiger in this serial ATA HD. Some weird things are happening since then. Sometimes when I shutdown my Mac, the delay is too long, all the icons disappear and the spinning wheel cursor remains in the screen for a long time until the Mac shuts down.
Sometimes when I try to open some applications, the same thing happens, the delay is long. And it happens too when I try to quit some applications. The sintom doesn't follow a rule - sometimes happen and other times it don't happen. And when I hit optioncommandesc to force quit, the application appears in the list as 'not responding', and even when I force quit it doesn't quit at all.
I already have checked the disk permissions, I have runned MacJanitor, but the problem is still there.
Any idea?Hello! Long delays are often caused by corrupt disk directories. I'd first boot from the install Tiger disc and run the repair disk routine and then repair permissions AFTER rebooting from the hard drive. Other than that I'd get Diskwarrior to keep the directories in good shape. Tom
-
HT1918 How do you solve an issue with the card? I don't get the option of 'none' :(
How do you solve an issue with the card? I don't get the option of 'none'
I had this exact same problem with the new iPhone I bought on 1/4/13. The walk through they provide on how to do this is useless because it fails to explain that if you are already having the problem of not getting the "None" payment option with an Apple ID then you will need to create a completely new Apple ID.
I had to do this 7 times since I bought my iPhone on Friday until this morning to figure out how to finally be able to use the Home Sharing option in iTunes to put my music collection on my brand new $500.00 iPhone. Pretty pathetic if you ask me but since it made me so angry I want to make sure other know how to do this so you don't get as upset as I did.
#1 If your current or soon to be "old" Apple ID is not providing the option for "None" as a payment option then you need to make a brand new one. But you have to make it specifically how I tell you.
#2 You will need to use an email address that has not already been used for anything related to a previous Apple ID. You might need to make a brand new email address.
#3 Open iTunes, then open iTunes Store (upper right corner of iTunes).
#4 Click on App Store (upper center of screen).
#5 Scroll down the screen page until you see Top Free Apps on the right side.
#6 Choose any one of the FREE apps.
#7 You should either get the option to create a new Apple ID box, either that, or it will pop up with some kind of disclaimer and then it does the create new Apple ID.
Either way just create a new Apple ID when it gives you the option to and then when you get to the page that looks like the payment page the "None" payment option will finally be available.
Note: You will still have to fill out the information on the payment page. As long as you choose the "None" option it will not request any credit card information.
#8 You will be sent a confirmation email to the new email account. Just follow through with what ever it tells you and viola now you can use your Apple Device.
What a pain in the keester, eh? -
A20m Trouble with Ethernet Card and the Internet
I have a A20m Thinkpad that is not connecting to the internet. At first my problem was that I did not have an ethernet card as detailed on this forum post.
http://forums.lenovo.com/t5/Legacy-ThinkPads-A-I-V-300-600/A20m-Network-Controller-Driver/m-p/219725...
Thus I bought this ethernet card and installed it.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=190223756432
From what I can tell I installed it correctly and then I preceded to install the drivers for this card. The ones located on this page.
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-4K4PWT
It seemed to work well and the controller shows up in hardware devices.
That went well, but I still cannot connect to the internet. I thought it might be the card itself but after running the 3Com NIC Utilities that came with the drivers it said that there were no problems with the card.
Also of note I have noticed that there are no lights on the port where the ethernet cable is plugged in. I am not sure if there should be. Any help people could offer would be most appreciated. This Thinkpad is running windows XP.Called them up today and basically I got them to pay for shipping this time. They told me they did not have any more new ones of my model and are not willing to ship me a suitable new replacement model after all this trouble and just gonna keep on shipping me refurbished until we find one that works (the heck? ...his quotes). So basically by the time I get my 2nd refurbished replacement (and assume it actually works this time) my computer would been down for over 2 months.
I am currently saving up for a 9800gt from evga since they are budget priced now (heard they actually have a good customer service and good quality cards) and based on my experience with MSI I can't recommend their products to anyone now sadly.
Hopefully MSI will send me out a tested a verified to word refurbished card this time. -
Hey guys, how are you?
I just bought an IPhone and I´m trying to get some apps from the ITunes Store.
I created an account but when I try to put my credit card number and security code (from the verse of the card), I get the error script: "Please enter valid Security Code".
I don´t have any problem with my card, it´s working absolutelly normal with any other online shop around the world including Amazon, Ebay, etc...but in the ITunes store, I get this crap error!
I just have this credit card and I don´t wanna do another from Credicard or Amex only because a bug of the system.
Doing a research in past topics, I found other people with the same issue, but didn´t get any answer on how to solve this.
Please, can someone help me?Contact iTunes.
Apple - Support - iTunes - Contact Us -
Weird Problem with Mouse Preferences
I have a weird problem with my mouse preferences.
When I open System Preferences - Keyboard & Mouse - Mouse, I can change the Double Click Speed as much as I want, it doesn't have any effect. No matter what the slider shows, the speed seems to be set to "slow" and stays like that. It's driving me mad, because I continuously open documents without wanting it. For example, when I click on a document and click a second time to change its name, it always opens. I'd have to wait VERY long before the second click to prevent that.
I've already tried to connect another mouse, or to use another USB port. Also I've tried to trash the Preferences Cache in my Library. Without success.
Anyone an idea what the problem is and how to solve it?
Mac Pro Mac OS X (10.4.8)So I think now this is it
weborican's post at macosxhints helped me to solve the problem, this time for good, as it seems:
http://forums.macosxhints.com/showthread.php?p=336319
The problem seems to be the Intel version of the driver for the MacAlly IceKey keyboard. I uninstalled the driver and now everything works as it should. So until Macally bring a new driver I will use the keyboard that came with the Mac Pro.
who would think of the keyboard when the mouse seems to be the problem? -
Weird problem with power shut down msi nforce 4 platinum
recently i have flashed the latest bios 1.9 of msi nforce 4 u platinum, everything work fine untill yesterday.some stanges happened......
my power doesnt have a on and off button on it ,every time i turn off the pc , i have to turn off the power button of a socket near by the pc.everytime it works fine, but yesterday when i turn on the power on button of that socket , the pc automatic start, i didint turn on the power button of pc, what a weird problem.. also when i go into os , the system time also changed, although i can turn them back to correct one in bios and os, but when i turn the pc off , it changed again... could any one help me out , what is teh real problem of my pc. some virus ?thanks a lot.
weird problem with power shut down msi nforce 4 platinumit seems the first question has been solved. cos today when i turn on pc, the oc set up is gone ,in bios, it back to the original set up.i cant save my oc setup, so it definitely a battery problem!!!!!!!!!!!
i take the old battery t o a saler , there they massure it with voltmeter, it shows only 0.97v, but in bios 1.6 it shows 1.82v, so waht is the real meaning of that reading num in bios for battery?it cant be the real voltage of the battery. i buy a new one ,this one is maxcell 2032 hitachi, the old one is shi t panansonic 2032 .the new one shows 3.17v with voltmeter, then i come back , installed the new battery , in bios this time it shows 2.3v in bios 1.6. so the reading num in bios for battery is definitely is not a real reading for your battery.
i will keep my pc in 24/7 using , and i will look if the battery is sable or not , cos untilll now no one come out for a real explain for this stupid battery problem of msi nofroce 4 platinum.i dont want change battery every 2 or 3month, what a real sick of this!!!! -
Weird problem with k8n neo fsr
hello!
i have weird problem with my K8N Neo-fsr and Athlon 64 2800+ socket 754, when i try to overclock i change in bios HT from 4 to 3 (for better stability), after restart nothing happen, my pc wont boot, also nothing on screen, so i must clear cmos for solve my problem and set to 4 i try several bioses from official to moded also pinochio`s and syar`s moded and allways the same issue is it problem with processor? or motherboard?
thanx for your help and sorry for my englishYou should first get down cpu ratio, then get up cpu fsb and as you wanted set ht frequency from 4 to 3 and "save changes and exit" if it doesn't boot change you psu (at least antec 380 or tagan) or go fast to send back your mobo to reseller!!
-
Hi,
I have a 3rd generation iPod and I'm having a weird weird problem with it.
For some odd reason, whenever I try to play a song, my iPod resets completely. I can scroll and look at my songs, but once I start playing it, the iPod stops and resets, as if I did the "play/menu button press" procedure.
I cant hear 1 song, even though I have a few hundred in the iPod.
Also, whenever I connect it to the computer, the computer does not see it and The "Do not disconnect" icon appears on the iPod for like 3 seconds and then goes away.
Does anyone know the problem and how I can fix it?Hello,
Try restoring your iPod (through the iPod Updater). If you can't get it to restore, then try these steps:
Eject your iPod from computer (for now).
Close Updater and iTunes programs.
Restart the computer.
Put your iPod into disk mode.
Connect your iPod to your computer again.
See if the iPod Updater recognizes your iPod
Or, if you are still having issues restoring, try doing the other Five R's:
<a href="The Five R's</a>
If you are on Windows, have you tried checking out this article?
<a href="http://docs.info.apple.com/article.html?artnum=61711">iPod doesn't appear in iTunes or in Windows
If you're on a Mac:
iPod missing in iTunes and on Mac desktop
I hope this helps,
-Kylene
If any post helps or solves your issue, please mark it that way accordingly. Thank you for helping the boards!
Maybe you are looking for
-
How to delete a custom columns from a content-type in Sharepoint Client object model
I have a windows interface where I create a content-type and then create a column and adds that column to the content-type. //availableCT is my content-type where the column is present. //get all available fields within this content-type FieldCollect
-
Inserting data using stored procedure
Using SQL Server Express 2014, I'm creating a stored procedure to accept parameters and convert data from a staging table to a production table. The parameters specify the table names and a field to lookup in another table. This is the first stored p
-
In a simple example, I create a receipt for $1400 and apply $1500 against a transaction. I'm therefore left with a negative -$100, does anyone know how to apply a negative amount using the on-account feature. If there was just one invoice I could do
-
Error loading template 0TPLB_0CSAL_C01_Q0021_1
Dear all, I am running BI 7.0 for 2 years and implementing CRM in a separate server now. We have CRM Web UI set up and has using links to BI reports. It is frustrated since most links are using BW 3.X template and I am running BI 7.0 so I have to
-
Hi Experts, We need to delete old logs for all sync jobs, batch risk analysis and management view data from RAR. Initially we had run all jobs for all roles but management requirement is that it should show only customer roles. Although we can anytim