[SOLVED]Wfii-Menu cannot connect to WEP &WICD

(Using the sudo wifi-menu works perfectly on WPA but WEP has a problem)Job for netctl@wlp3s0\x2dMYNETWORK.service failed. See 'systemctl status netctl@wlp3s0\x2dMYNETWORK.service' and 'journalctl -xn' for details.
NO I will not switch to WPA
YES I have googled this
Answer to solve the error. Please do not say anything like "Switch to WPA" "Why dont you use the WPA network"?
Wicd Error
YES I have googled this
Yes I have Reinstalled it.
When I connect it says "Done Connecting" but isnt really connected to anything at all.
File "/usr/share/wicd/gtk/wicd-client.py", line 1066, in <module>
    main(sys.argv)
  File "/usr/share/wicd/gtk/wicd-client.py", line 91, in wrapper
    return func(*args, **kwargs)
  File "/usr/share/wicd/gtk/wicd-client.py", line 1062, in main
    mainloop.run()
Last edited by Jean3799 (2013-06-21 16:34:36)

cris9288 wrote:
1. Make sure that only one network manager is enabled.
2. if you are using netctl and a hex key, a WEP profile requires you to prepend some characters to the key. Can't remember what they are at the moment, but it's definitely in the manpage.
OMG! <33333
used "sudo systemctl stop netctl netcfg dhcpcd networkmanger"
restart up wicd
Connected to my network
[SOLVED!]
Thanks So much <33
Last edited by Jean3799 (2013-06-21 16:34:53)

Similar Messages

  • Has anyone solved the notorious "Cannot Connect to Youtube" Error?

    Whenever I open the Youtube app I get "Cannot connect to Youtube" no matter what why network I'm on no matter how I'm connected. EVERYTHING else on the phone works perfectly.
    Even the youtube website works fine via safari but the videos WILL NOT PLAY.
    I have tried all the hit or miss speculative solutions that people claim work for them:
    *Change the date past the year 2030 and then back again.
    *Hard reset the phone
    *Power on power off
    *Reset network settings
    *Full reset of settings
    *Trying different networks
    *Connecting to the computer and synching the phone and the apps
    None of these work. Some people claim success with one or more of the different methods above but it doesn't work for me and many others. This issue has been going on for a LONG time and it is WIDESPREAD (just search this forum or the internet at large via google and you will see). It spans across multiple devices (iPhone and iPod Touch alike) and multiple software versions across multiple generations of the devices. I find it appalling that Apple is silent on this gaping bug.
    Does anyone have a solution? Does anyone know how to get Apple to DO SOMETHING?
    Thanks.

    Are you senior executives in Apple's cost cutting in the customer service and quality control department or what?
    +If it works fine on your friends iPhones when they come over it does not sound like a bug, it sounds like a problem with your iPhone.+
    It IS a problem with my iPhone. Anything that causes one of the built in operating applications to fail frequently under normal use whether or not it happens on every device consistently is absolutely by definition a bug.
    +Explain why the alleged bug is not on every iPhone then ? This is the bit that you fail to explain in every post you make.+
    It may not be on every phone but it definitely is on MANY, what triggers it is unknown. Microsoft releases hundreds if not thousands of bug fixes every year. Why don't all the HUNDREDS of millions of Windows users all experience every single bug? By your logic none of these bugs exists because every single user doesn't experience them. I can't remember the last time I personally experienced one of the bugs that all these mountains of bug fixes I download through windows update automatically correct so I guess none of those bugs actually exist.
    +I have read a lot more articles by people who think the world is flat and that means nothing. There are 10 million odd iPhones, 50 people isn't a conclusive fault. explain why 9,999,950 of them appear to work fine?+
    There are thousands of people with this problem. With a problem like this a person with even shred of intellect would read a few posts from a few different sources and come to an informed conclusion on the issue rather than dedicate the next six months of their life to reading every single thing ever written about it. Once you see the pattern is exactly the same even in 10 plus posts and it's obvious there are THOUSANDS more you can conclude it's not an isolated incident.
    +Thats hardly conclusive - there are youtube video's on how to make an egg custard but that doesn't mean nobody can make one without instruction, or that all egg custards made are defective somehow.+
    Inappropriate and just flat out wrong analogy. If there was a "how to make custard when it fails in a specific way consistently" then your analogy would be appropriate. The "how to FIX x" youtube video is not analogous to "how to use your iphone" or "how to do x." In any event comparing egg custard to an iphone is clearly apples to oranges - or more like apples to nuclear reactors.
    +Don't bother quoting Google Stats - you can get hits on every search string you put in, and one post gets copied again and again and comes up as multiple hits.+
    Really? I had no idea google one of the most successful companies in the world had such a faulty and defective search engine that it gives phony results. Have you told them? Maybe they will hire you to fix it.
    You may get SOME hits for any garbage you put in (not really ANY but a lot of garbage) but they won't be very many.
    "asldfjla adfkjdsafd" - 0 hits (looks like you're wrong again)
    "random string of nonsense searching" - 22,500 hits
    "iphone "compass not working"" - 7,700 hits
    "ipod "calendar not working"" - 4,570 hits
    "iphone "calendar not working"" - 8,490 hits
    "iphone "stocks not working"" - 3 hits (really google makes too many phony hits? Are you sure you dont' mean not enough - do you really believe only 3 people ever uttered these words on the ENTIRE internet???)
    "iphone "calculator not working"" - 23,900 hits
    "iphone "cannot connect to youtube"" - 980,000 hits
    "ipod "cannot connect to youtube"" - 859,000 hits
    Yep I see it, it's settled now. It definitely must be something I just made up. Looks like nobody else is having that problem. Must not mean a thing that there are more than 100 times more articles on this built in app than a couple others I picked at random. I'm glad you settled this for me how google is broken and only my iphone is misconfigured and the "cannot connect to youtube" error is not widespread.

  • Has anyone solved the notorious "Cannot Connect to Youtube" error/bug?

    Whenever I open the Youtube app I get "Cannot connect to Youtube" no matter what why network I'm on no matter how I'm connected. EVERYTHING else on the phone works perfectly.
    Even the youtube website works fine via safari but the videos WILL NOT PLAY.
    I have tried all the hit or miss speculative solutions that people claim work for them:
    *Change the date past the year 2030 and then back again.
    *Hard reset the phone
    *Power on power off
    *Reset network settings
    *Full reset of settings
    *Trying different networks
    *Connecting to the computer and synching the phone and the apps
    None of these work. Some people claim success with one or more of the different methods above but it doesn't work for me and many others. This issue has been going on for a LONG time and it is WIDESPREAD (just search this forum or the internet at large via google and you will see). It spans across multiple devices (iPhone and iPod Touch alike) and multiple software versions across multiple generations of the devices. I find it appalling that Apple is silent on this gaping bug.
    Does anyone have a solution? Does anyone know how to get Apple to DO SOMETHING?
    Thanks.

    get the new update 3.1.3. youtube works great for me. not had a problem with it yet...

  • [SOLVED] Network Manager cannot connect to wifi after suspend

    Hi,
    There appears to be similar threads recently, but they relate to no wifi at all. I did some updates today, and now if I suspend or hibernate, network manager cannot reconnect to my wifi. It will (after a while) ask me to authenticate, but still fails. Nothing works except a reboot where it connects without issue.
    It was fine yesterday, has only started today. Here is my pacman log for today's updates:
    [2012-04-11 17:13] upgraded libpciaccess (0.13-1 -> 0.13.1-1)
    [2012-04-11 17:13] upgraded lib32-libpciaccess (0.13-1 -> 0.13.1-1)
    [2012-04-11 17:13] upgraded mpd (0.16.7-3 -> 0.16.8-2)
    [2012-04-11 17:13] upgraded xorg-server-common (1.12.0.901-1 -> 1.12.0.902-1)
    [2012-04-11 17:13] upgraded xorg-server (1.12.0.901-1 -> 1.12.0.902-1)
    [2012-04-11 17:13] upgraded xorg-server-devel (1.12.0.901-1 -> 1.12.0.902-1)
    [2012-04-11 17:13] upgraded xorg-server-xephyr (1.12.0.901-1 -> 1.12.0.902-1)
    Here is my messages log:
    Apr 11 18:38:28 localhost NetworkManager[1475]: <info> Auto-activating connection 'Padfoot'.
    Apr 11 18:38:28 localhost NetworkManager[1475]: <info> Activation (wlan0) starting connection 'Padfoot'
    Apr 11 18:38:28 localhost NetworkManager[1475]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
    Apr 11 18:38:28 localhost NetworkManager[1475]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
    Apr 11 18:38:28 localhost NetworkManager[1475]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
    Apr 11 18:38:28 localhost NetworkManager[1475]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
    Apr 11 18:38:28 localhost NetworkManager[1475]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
    Apr 11 18:38:28 localhost NetworkManager[1475]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
    Apr 11 18:38:28 localhost NetworkManager[1475]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
    Apr 11 18:38:28 localhost NetworkManager[1475]: <info> Activation (wlan0/wireless): connection 'Padfoot' has security, and secrets exist. No new secrets needed.
    Apr 11 18:38:28 localhost NetworkManager[1475]: <info> Config: added 'ssid' value 'Padfoot'
    Apr 11 18:38:28 localhost NetworkManager[1475]: <info> Config: added 'scan_ssid' value '1'
    Apr 11 18:38:28 localhost NetworkManager[1475]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
    Apr 11 18:38:28 localhost NetworkManager[1475]: <info> Config: added 'psk' value '<omitted>'
    Apr 11 18:38:28 localhost NetworkManager[1475]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
    Apr 11 18:38:28 localhost NetworkManager[1475]: <info> Config: set interface ap_scan to 1
    Apr 11 18:38:28 localhost NetworkManager[1475]: <info> (wlan0): supplicant interface state: disconnected -> scanning
    Apr 11 18:38:29 localhost NetworkManager[1475]: <info> (wlan0): supplicant interface state: scanning -> authenticating
    Apr 11 18:38:53 localhost NetworkManager[1475]: <warn> Activation (wlan0/wireless): association took too long.
    Apr 11 18:38:53 localhost NetworkManager[1475]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
    Apr 11 18:38:53 localhost NetworkManager[1475]: <warn> Activation (wlan0/wireless): asking for new secrets
    Apr 11 18:38:53 localhost NetworkManager[1475]: <info> (wlan0): supplicant interface state: authenticating -> disconnected
    Apr 11 18:38:53 localhost NetworkManager[1475]: <warn> Couldn't disconnect supplicant interface: This interface is not connected.
    Apr 11 18:38:53 localhost NetworkManager[1475]: <warn> No agents were available for this request.
    Apr 11 18:38:53 localhost NetworkManager[1475]: <info> (wlan0): device state change: need-auth -> failed (reason 'no-secrets') [60 120 7]
    Apr 11 18:38:53 localhost NetworkManager[1475]: <warn> Activation (wlan0) failed for access point (Padfoot)
    Apr 11 18:38:53 localhost NetworkManager[1475]: <info> Marking connection 'Padfoot' invalid.
    Apr 11 18:38:53 localhost NetworkManager[1475]: <warn> Activation (wlan0) failed.
    Apr 11 18:38:53 localhost NetworkManager[1475]: <info> (wlan0): device state change: failed -> disconnected (reason 'none') [120 30 0]
    Apr 11 18:38:53 localhost NetworkManager[1475]: <info> (wlan0): deactivating device (reason 'none') [0]
    Last edited by Padfoot (2012-04-13 23:47:55)

    heiko wrote:linux-3.3.2 is released on www.kernel.org and reverts the patch that introduced this problem.
    For those using the arch repo kernel the next release will solve this issue. So I suggest waiting for this (no more than a few days) and use the LTS kernel in the meantime (or using a fixed ath9k module if already built).
    Thanks for that heiko. I thought that would be the case, hence I just waited.
    Will mark this as solved.
    Cheers.

  • Cannot connect with WEP Encryption

    I have had my new iMac intel for about 5 days now and I must say, it's been amazing. It's a welcome change from the dark and gloomy world of windows pc's. I have just one problem connecting to my wireless network when WEP Encryption is turned on. The AirPort extreme card on my imac can connect to the network fine without the WEP encryption, but as soon as i turn wep encryption on, and enter the code on my imac, it refuses to connect, sometimes saying the password is incorrect or other times just saying there was an error in the connection. I've checked the password many times and my windows pc can connect to the network fine using the same password. Is there anything I'm doing wrong? Am I selecting the right type of WEP? If I cannot use WEP anymore for some reason to make it work with my iMac, is MAC-Address protection safe enough? Thanks in advance for your help.

    I have just one problem connecting to my wireless network when WEP Encryption is turned on.
    I along with anyone else would have no problem connecting to your network.
    I could sit outside your house and crack your WEP key sometimes in minutes using tools readliy available on the internet.
    Even if you turn on MAC Address protection also it offers no security either. MAC address can be spoofed and detected.
    The only security you should consider using is WPA.

  • [SOLVED] Broadcom bcm4318 cannot connect anymore

    Hello,
    I'm using arch on a HP Compaq nc6120 laptop with a Broadcom bcm4318 wifi chip. So far it worked correctly with the b43 driver. Now I have the biggest difficulties to connect to any ssid using NetworkManager, although surprisingly it happens to work from times to times. The networks are detected, but connection attempts fail.
    I have browsed the forums and the web without success.
    I suspect it started with kernel 2.6.29 but I'm not sure it is linked to it. The problem happens with WPA as well as unencrypted networks, so I guess wpa-supplicant is not to suspect.
    Here are the relevant lines from /var/log/messages.log :
    Jun 16 08:17:06 mamgoudig NetworkManager: <info> (wlan0): device state change: 1 -> 2
    Jun 16 08:17:06 mamgoudig NetworkManager: <info> (wlan0): bringing up device.
    Jun 16 08:17:06 mamgoudig kernel: input: b43-phy0 as /devices/virtual/input/input8
    Jun 16 08:17:06 mamgoudig kernel: b43 ssb0:0: firmware: requesting b43/ucode5.fw
    Jun 16 08:17:06 mamgoudig kernel: b43 ssb0:0: firmware: requesting b43/pcm5.fw
    Jun 16 08:17:06 mamgoudig kernel: b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
    Jun 16 08:17:06 mamgoudig kernel: b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
    Jun 16 08:17:06 mamgoudig kernel: b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
    Jun 16 08:17:06 mamgoudig kernel: Registered led device: b43-phy0::radio
    Jun 16 08:17:06 mamgoudig kernel: b43-phy0: Radio turned on by software
    Jun 16 08:17:06 mamgoudig kernel: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    Jun 16 08:17:06 mamgoudig NetworkManager: <info> (wlan0): preparing device.
    Jun 16 08:17:06 mamgoudig NetworkManager: <info> (wlan0): deactivating device (reason: 2).
    Jun 16 08:17:06 mamgoudig NetworkManager: <info> (wlan0): device state change: 2 -> 3
    Jun 16 08:17:07 mamgoudig NetworkManager: <info> (wlan0): supplicant interface state: starting -> ready
    Jun 16 08:17:47 mamgoudig NetworkManager: <info> Activation (wlan0) starting connection 'MyPlace'
    Jun 16 08:17:47 mamgoudig NetworkManager: <info> (wlan0): device state change: 3 -> 4
    Jun 16 08:17:47 mamgoudig NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
    Jun 16 08:17:47 mamgoudig NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
    Jun 16 08:17:47 mamgoudig NetworkManager: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
    Jun 16 08:17:47 mamgoudig NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
    Jun 16 08:17:47 mamgoudig NetworkManager: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
    Jun 16 08:17:47 mamgoudig NetworkManager: <info> (wlan0): device state change: 4 -> 5
    Jun 16 08:17:47 mamgoudig NetworkManager: <info> Activation (wlan0/wireless): access point 'MyPlace' has security, but secrets are required.
    Jun 16 08:17:47 mamgoudig NetworkManager: <info> (wlan0): device state change: 5 -> 6
    Jun 16 08:17:47 mamgoudig NetworkManager: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
    Jun 16 08:17:48 mamgoudig NetworkManager: <WARN> update_one_setting(): Failed to update connection secrets: 1 802-1x
    Jun 16 08:17:48 mamgoudig NetworkManager: <WARN> real_connection_secrets_updated(): Ignoring updated secrets for setting 'ipv4'.
    Jun 16 08:17:48 mamgoudig NetworkManager: <WARN> real_connection_secrets_updated(): Ignoring updated secrets for setting '802-11-wireless'.
    Jun 16 08:17:48 mamgoudig NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
    Jun 16 08:17:48 mamgoudig NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
    Jun 16 08:17:48 mamgoudig NetworkManager: <info> (wlan0): device state change: 6 -> 4
    Jun 16 08:17:48 mamgoudig NetworkManager: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
    Jun 16 08:17:48 mamgoudig NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
    Jun 16 08:17:48 mamgoudig NetworkManager: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
    Jun 16 08:17:48 mamgoudig NetworkManager: <info> (wlan0): device state change: 4 -> 5
    Jun 16 08:17:48 mamgoudig NetworkManager: <info> Activation (wlan0/wireless): connection 'MyPlace' has security, and secrets exist. No new secrets needed.
    Jun 16 08:17:48 mamgoudig NetworkManager: <info> Config: added 'ssid' value 'MyPlace'
    Jun 16 08:17:48 mamgoudig NetworkManager: <info> Config: added 'scan_ssid' value '1'
    Jun 16 08:17:48 mamgoudig NetworkManager: <info> Config: added 'key_mgmt' value 'WPA-PSK'
    Jun 16 08:17:48 mamgoudig NetworkManager: <info> Config: added 'auth_alg' value 'OPEN'
    Jun 16 08:17:48 mamgoudig NetworkManager: <info> Config: added 'psk' value '<omitted>'
    Jun 16 08:17:48 mamgoudig NetworkManager: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
    Jun 16 08:17:48 mamgoudig NetworkManager: <info> Config: set interface ap_scan to 1
    Jun 16 08:17:48 mamgoudig NetworkManager: <info> (wlan0): supplicant connection state: inactive -> scanning
    Jun 16 08:17:49 mamgoudig NetworkManager: <info> (wlan0): supplicant connection state: scanning -> associating
    Jun 16 08:17:59 mamgoudig NetworkManager: <info> (wlan0): supplicant connection state: associating -> disconnected
    Jun 16 08:17:59 mamgoudig NetworkManager: <info> (wlan0): supplicant connection state: disconnected -> scanning
    Jun 16 08:18:00 mamgoudig NetworkManager: <info> (wlan0): supplicant connection state: scanning -> associating
    Jun 16 08:18:01 mamgoudig NetworkManager: <info> (wlan0): supplicant connection state: associating -> disconnected
    Any help would be appreciated.
    Last edited by elb (2009-06-19 07:42:29)

    I probably found the cause of the problem : I had followed recommendations in the wiki (http://wiki.archlinux.org/index.php/Net … Kit_issues) and applied the first option (by modifying /etc/pam.d/kde).
    I came into some authorizations problems : mounting usb devices with Dolphin became impossible, and I strongly suspect my wifi problems happened after that.
    I rolled back the modification yesterday and since that I haven't encountered connection problems anymore.

  • [SOLVED] iwlwifi suddenly cannot connect (related to gnutls)

    Downgrading gnutls (3.0.17-1 -> 3.0.15-1) worked. Just wondering if there is a better way to do this as I really don't like holding packages back.
    Last edited by dodo3773 (2012-03-18 19:14:19)

    Hspasta wrote:Does it not work at all? I'm using iwlwifi and gnutls3.0.17-1 and the wireless works fine. I have an Intel Centrino 6205 if that's of any relevance.
    Thanks for the reply. Yeah it couldn't connect. My card is a:
    04:00.0 Network controller: Intel Corporation Centrino Advanced-N 6230 (rev 34)
    I saw a post earlier on a modprobe option. I will mess with it tomorrow and post back anything I can find.

  • I cannot connect my ipad with the program of yamaha stagemix, is urgent that they solve this problem to me, buys ipad esfecificamente to use that application

    I cannot connect my ipad with the program of yamaha stagemix, is urgent that they solve this problem to me, buys ipad esfecificamente to use that application, has somebody been able it to solve?

    I cannot connect my ipad with the program of yamaha stagemix, is urgent that they solve this problem to me, buys ipad esfecificamente to use that application, has somebody been able it to solve?

  • Hello, my sister her macbook pro cannot connect to our wireless internet. My imac however can, so the problem has to do with her laptop. We were wondering how we could solve this problem? Thank you very much in advance!

    Hello, my sister her macbook pro cannot connect to our wireless internet. My imac however can, so the problem has to do with her laptop. We were wondering how we could solve this problem? Thank you very much in advance!

    We did that, but it just doesn't seem to be able to connect. So basically we tried to connect to our network and insert the password, but afterwards it does nothing. Weird thing is also that the network symbol (top right of the screen) says that it has been connected, but when I go look at the system preferences --> network, it states that it has not been connected

  • How can i solve "Cannot connect to the iTune Store" issue on my iPhone?

    Hi,
    Frequently i'm getting alert message (Cannot Connect to the iTune Store) while use my valid Credential on iPhone 4 (even Itunes application) Setting-> iTunes & App Stores->. but same credential accepted other iPhones too why not in my iPhone 4. same way others Apple ID wouldn't accept in my iPhone 4. how can i solve this problem? please suggest me.
    Thanks in Advance,
    Suresh Balakrishnan.

    Take a look at these instructions:
    http://www.digitaltrends.com/mobile/how-to-make-ringtones-for-iphone/

  • How to solve problem - " Safari cannot open page because it isn't connected to the internet" but the airport is ok. signal full and i have n IP address.

    How to solve problem - " Safari cannot open page because it isn't connected to the internet" but the airport is ok. signal full and i have n IP address. and i m using Macbook pro.
    OS snow leopard and above...

    Do you have this problem with all websites, or only some? If only some, which ones?

  • Cannot connect OSX 10.4 Tiger to wifi WEP personal

    I have two old G3's or G4's that can only run OSX 10.4 Tiger. They connect to unsecured routers just fine.
    But the problem is they cannot connect to my Q1000 Centurylink wifi router when i put a password on it. I have tried WEP and WPA-personal and used AES and TKIP configurations, but they tell me they are unable to connect. I know there are few of these around but it seems odd that i cannot find this issue on the internet with a Google search.
    Can you think of any work around?
    A different forum that is more relevant?

    Hi, on WEP try Putting a $ in front of the password...
    $paswd
    If 5 chrs.
    Or...
    nstead of joining it from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed. Before I went through network diagnostics and all of that stuff in system preferences, and then I tried the "Join Other Network" method, and now it works like a dream.
    On WPA personal, the original Airport cards neede a Firmware update to do that, & they cant do WPA2.

  • When connecting my iphone 4 to itunes for the first time i get the following message "cannot connect to this device because Apple Mobile Service is not started" what does this mean and how do I solve it?

    when connecting my iphone 4 to itunes for the first time i get the following message "cannot connect to this device because Apple Mobile Service is not started" what does this mean and how do I solve it?

    I'd start with the following document with that one:
    iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • Please help me. My YouTube app will not work. Every time I open it says 'cannot connect to youtube'. I have searched for help and tried resetting my settings and rebooting my ipad2 but nothing has solved the issue.

    Please help me. My YouTube app will not work. Every time I open it says 'cannot connect to youtube'. I have searched for help and tried resetting my settings and rebooting my ipad2 but nothing has solved the issue.

    Yes, I am connected to the Internet through my wifi. Everything is working fine with the e  eption of youtube.  I have reset all Internet settings and have tried synching to iTunes followed by rebooting.  This is all the advice I have found although none of it has been helpful.
    Has anyone else encountered this problem?

  • When trying to do updates via App Store I got the message "Kan inte ansluta till iTunes Store" in english "Cannot connect to iTunes Store". How to solve this problem?

    When trying to do updates via App Store I got the message "Kan inte ansluta till iTunes Store" in english "Cannot connect to iTunes Store". How to solve this problem?

    Efter att ha försökt att använda annat wifi fick jag samma problem dvs. kunde fortfarande inte göra uppdatering av mina appar. Jag prövade att ta bort flera stycken av dessa men det var ingen skillnad. På resa med ytterligare ett annat wifi lyckades det helt plösligt, vet inte varför. Får se om det blir samma problem nästa gång jag blir uppmanad att uppdatera appar.

Maybe you are looking for

  • Dialing numbers on the e71

    So here's my setup. When I make international calls from the US, first there's a toll free number I have to call. Let's say 1800-123-4567 Then I have to dial my password, say 1234 after a brief pause.  Finally, I have to dial my destination phone num

  • 1366 x 768 resolutions on titan 700

    Hello, how can I set the 1366 x 768 resolutions on my Titan 700? Thanks for your co-operation Marco

  • Call agreement processing in WEB UI from ABAP WebDynpro

    Dear all, I have two problems: 1) I create agreement (BUS200071, object type ZGAG) in web dynpro application. After successfull creation I want to call  agreement processing within web dynpro application or via new browser window. 2) I managed to cal

  • Loading an image

    I have a problem with my code loading a file. I got some code for loading an image on the internet. the code compiles but when I add the module to my main (GraphicEvaluator.java) I get an error. below is the code and how I call the module plus the er

  • Opening a new window after computations and validations

    Hi all I want to open a new popUp window after a submit button is clicked but this window should open only after all the validations assosiated with this button are executed. Please note that, I want to open this window before the process associated