[SOLVED]what do the package dependencies mean?

Could somebody tell me the meaning of the dependencies?
https://www.archlinux.org/packages/comm … _64/r8168/
Dependencies (3)
linux>=3.15
linux<3.16
linux-headers (make)
I now know that (make) means the package will be needed in build/make. But what does the upper two lines mean?
Is it to say all kernel versions are OK?
Last edited by zhy2019 (2014-06-28 12:01:07)

progandy wrote:It means that r8168 needs a kernel from the 3.15 series (e.g. 3.15, 3.15.0, 3.15.1, 3.15.rc4). It won't work with 2.6, 3.14.7, 3.14, 3.16, 3.16.1, 4.123, ...
so the >= or < symbols only mean work or not work?
google does not work for these symbols, and it is not so obvious for new comers.

Similar Messages

What is the error code mean? And how to solve it ?Please give your answer. Thanks

What is the error code mean? And how to solve it ？Please give your answer. Thanks
Attachments:
QQ截图20140403134626.png ‏59 KB

duplicate post
LabVIEW Champion . Do more with less code and in less time .

Quickly!Quickly!Quickly!What is the error code mean? And how to solve it ?Please give your answer. Thanks

What is the error code mean? Why is there an error?And how to solve it ？Please give your answer. Thanks！
——1110340026
Attachments:
QQ图片20140403140655.jpg ‏108 KB

Sannieboyyyy wrote:
Could be me, but your VI is not working properly on the english version of LV. Can I suggest you to try programming in English in the future?
Yes, it's you. The VI is working just fine, except for some cosmetic issues with the labeling. I don't think is is a valid suggestion to force somebody to program in a specific language, especially since LabVIEW supports all these languages.
Here are the problems with the VI:
If you don't want an amplitude of zero, you need to set the amplitude control to a nonzero value before running. Simple as that!. (You could also set the input range for the amplitude control to exclude zero or use a case structure to skip certain code if the amplitude is zero).
You could also wire the error output to an indicator so it simply displays the errors, but keeps running.
Your while loop is currently useless. You can delete it and the program function will not change. Use a stop button at the loop condition.
Your while loop needs some timing so it runs at a reasonable rate. Either add a small wait or configure the signal generation to "simulate acquisition timing" instead of "run as fast as possible".
LabVIEW Champion . Do more with less code and in less time .

What is the package-visible class?

I am reading JCVM2.2.1 Spec.
I don't know what the package-visible class is?
for example,
Here is a sentence I could not understand.
A public class cannot contain a public or protected field of type reference to a package-visible class.
However, I know a general Access controls such as public, protected and private.
Help me?
What is the package-visible class in Java Card?

There is something called package protected in Java. This means that an object may be accessible thru a package only. Sort of like public with limited visibility.
Search the Java 2 Tutorial.

What is the package mzm.stuhjljp and how can I re download it ?

What is the package mzm.stuhjljp and how can I re download it ?
I opened it and a Lion icon went to apps folder, then I deleted the
package folder and package,because I did not recognize what it
was and after I found out I need the whole package stored
someplace else beside my download folder.

Hi,
Thanks a lot for your help and providing this link. I'd actually already looked at that before, but I don't understand how it clarifies what the default identity store is. The relevant part is this, if I understand correctly:
OPSS initializes the identity store service with the LDAP authenticator chosen from the list of configured LDAP authenticators according to the following algorithm:
1.    Consider the subset of LDAP authenticators configured. Note that, since the context is assumed to contain at least one LDAP authenticator, this subset is not empty.
2.    Within that subset, consider those that have set the maximum flag. The flag ordering used to compute this subset is the following:
    REQUIRED > REQUISITE > SUFFICIENT > OPTIONAL
    Again, this subset (of LDAPs realizing the maximum flag) is not empty.
3.    Within that subset, consider the first configured in the context.Step (1) will match 2 external AD's and the built-in WLS LDAP, so 3 in total.
Step (2) will still match 3 in total, as they are all 'sufficient'. In my setup, I need them all to be 'sufficient'.
Step (3) is a step I don't understand. What is "the first configured in the context"? What context? Do they mean the one that was first created? In that case I can't change the default, right?
Or do they mean "the first in the list on the WLS Console"?
Best regards,
Ludovic

I was playing with my ipad settings (it's an older model) and noted in the advanced settings of Safari there was a place to view website databases. When I clicked on this I saw websites. How do these get there and what does the space amount mean?

I was playing with my ipad settings and noted in he advanced settings of Safari there was a place to view "website databases". When I selected this I saw a multitude of websites.
Can anyone tell me how these get there? Can a website be posted even if it was never went to? What does the space amount mean? For example, 1.5 kb...is this quite a bit? Would it indicate someone has gone to a site multiple times?
I share my ipad with my teenage daughter and I'm trying to find out if she's lying to me. Obviously she's swearing that she has "no idea" how these got there and I'm trying to keep her safe (she's only 14).
Thanks everyone.
Concerned Mom

Think of your PC and the 'temporary internet folder' where it keeps cached copies of web pages or elements off a web page for 'quicker display the next time you visit'. That's pretty much what that folder is. 1.5K is tiny. Probably just a basic page with some text on it. (you might be confusing 1.5K with 1.5 megabyte....megabyte is large...it's roughly 1000 kilobytes, so the 1.5K is a tiny file)
As far as I know, the only way info gets into that folder is if the browser has been to that site.
if you have a concern there are browsers out there, McGruff is one i've seen recommended, that allow some degree of parental control and supervision. That or you could passcode lock the iPad or enable the restrictions to turn off some parts of the device to have some control.

What is the '~Icon/CheckedOk' mean in WD application ?

Hi ,
i follow an example from SDN and add an icon to my ALV cell. But i donot understand what is the '~Icon/CheckedOk' means?
Also i want to know where i can find all icons i could use. ths

These are Web Icons.
SAP provides predefined Web icons for the standard objects and functions that are used most frequently.
Refer this :
http://help.sap.com/erp2005_ehp_04/helpdata/EN/ec/bb08428dab5f24e10000000a1550b0/frameset.htm

Can I use firefox in webview? what is the package name and the activity name?

Can I use firefox in webview? what is the package name and the activity name?
I saw : intent.setClassName("com.tencent.mtt", "com.tencent.mtt.MainActivity");
but what is the name for firefox?

rahulmcadit wrote:
The phone is from UK and the carrier on which phone has been locked is "ORANGE". I want to use the same phone in India. I want to unlock the phone. Can you please suggest me what is the procedure to unlock the phone. How can I pay the amount to ORANGE carrier and can use my iphone in India.
Contact ORANGE to unlock it.
See this -> http://support.apple.com/kb/HT5014

What does the RHD symbol mean when using the multiple speakers?

i have two 1st gen apple TVs and when i pull up the multiple speakers prompt, i see an acronym "RHD" after each device.
what does the RHD symbol mean when using the multiple speakers?
typically i was used to seeing the Apple TV-1 vs. Apple TV-1-RHD??
What is the difference?

It's been modified to run Remote HD.
http://remotehd.com/

What is the table name means to me.

Hi All,
Here is the partial technical information for the field found in the SAP screen/GUI.
Table Name: /SAPSLL/PRODUCT_LLNS_DYNP_S
Field Name: CCNGN
Data element: /SAPSLL/CCNGN.
Here is my questions.
================
1. What is the table name means to me.
    Is it a table name in SAP repository or the table found in the backend database ?
    Let us say my backend database is oracle.
   The table name in the repository and the table name in the backend oracle database is the same ?
2.     What is the "Field Name:" means to me ?
3. What is the "Data element:" means here.
Any help or pointers are appreciated.
thanks
siva

Check with this
Go to SE84>ABAP Dictionary->Fields->Table fields/structure fields (double click )->Give the description of ur field in ur case (Schedule line date) and Press F8.
It will show where this field is available in the TABLESStructures.

What's the timestamp actually mean?

All the IDepthFrame, IBodyFrame, IColorFrame, IInfraredFrame interface have a member called "get_RelativeTime", and the description in MSDN simply is "Gets the timestamp of the * frame"(for
body frame, color frame and depth frame) or "Gets the source of the
** frame"(for infrared frame). I'm confused, what's the timestamp really mean and when's the timestamp generated?

The timestamp is just a reference time value for the frame. You cannot deduce anything from it other than it is a uniquely timed value in relation to the Kinect runtime. The value represents a TimeSpan value that is measured in 100ns increments.
Its uses can be to determine delta time between frames to ensure you are getting 30fps(or 15fps color) since the delta should be 33ms. Also, if you are comparing against depth/ir/body data and the color frames if there is a large delta to know if the
color frame is ahead or behind the current frame you are analyzing.
Carmine Sirignano - MSFT

What is the values and meaning for parameter TCLAS in functions

what is the values and meaning for parameter TCLAS in functions like
HR_INFOTYPE_OPERATION
regards
jan

Hi Jan,
Good Morning,
In TCLAS,
A, B , T will be there.
A- Master data and time data.
B- Applicant data.
T- Shift Schedule.
So, here we can say the default value will be integrated according to the above ABT.
Means in the feature ABKRS, if you give the default values for all the three, your payroll area will appear in Master Data and Time data. And in recruitment ( Appicant data ) and work schedules. Means you are getting ingrated to all the three.
And you can observe the feature PINCH also.
If you dont want to get integrate with Master data, then dont give the default value under the A- Master date and Time data. And if you want to get integrate with Recruitment , then give the default value under B.
I think u got the clear idea about TCLAS.
Dont forget to give the points
Thanks in Advance
Cheers
Vijai

What does the "text item" mean in SD?

what does the "text item" mean in SD?

Is that Item Text?
Please be clear in your questions.
As this is your first post you should have a look at the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement].
Also interview questions are not allowed here.
Regards
Karthik D

What does the word Factory mean in "naming factory "

What does the word Factory mean in "naming factory" in JNDI tech?

A Factory class is a class that produces an instance of an object. For example, a ParserFactory class will have a method that returns a Parser. Usually this Factory class is looking at something in the environment to decide which object to return. "Factory" is just one of many "Design Patterns" that you will encounter in the programming world. Several (many?) books have been written about design patterns.

What does the plus sign (+ ) mean in the app store updates?

What does the plus sign (+) mean in the upper corner of the app updates in the app store? Does it mean it costs more money?

No, it is free. I have yet to see a paid update. The + sign means it is a universal app, meaning that it works across iPad, iPhone and iPod touch.

[SOLVED]what do the package dependencies mean?

Similar Messages

Maybe you are looking for