[SOLVED] What is preventing Poweroff/Reboot?

My Arch box is running beautifully--but for a problem with poweroff/reboot. I have to manually hold the power button for a few seconds before it will actually shutdown (see image)
It's been doing that since I did a clean install 18 months ago...
http://i.imgur.com/4PECrwq.jpg
Where can I begin looking to see what might be hanging things up?
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --
Last edited by wilberfan (2014-04-16 20:22:33)

Jesus. What are the odds?
It's working now.
I *DID* run an -Syu this morning, so maybe something (systemd??) updated that addressed the issue. I also removed an lirc-i2c-module package...
[shrug]
Maybe just *posting* something in the forum was enough to scare it into working again! ;-)

Similar Messages

[SOLVED] Kernel panic on poweroff/reboot only in X

Hi guys,
Another day, another noob. I've been enjoying my arch experience so far and looking forward to continuing the journey! I've hit a small roadblock along the way however, I seem to get a kernel panic (system hang/caps lock blinking) upon trying to poweroff/reboot in the terminal. This seems to be since I updated linux from 3.19.2-1 > 3.19.3-1. Interestingly enough the hangs only occur when trying to poweroff/shutdown from X. I have no issue with either command at the initial tty console.
*Possibly related - during the upgrade I got 2 warnings - Possibly missing firmware for module: aic94xx and Possibly missing firmware for module: wd719xx
I went hunting for log files but wasn't 100% sure what I was looking for tbh.
Any help would be greatly appreciated.
Cap
Last edited by CapricornOne (2015-04-07 22:18:36)

mauritiusdadd wrote:
smirky wrote:Something like that. I guess he means that it's been acknowledged, discussed and probably someone made a patch for it. It's a matter of time for 3.19.4 to pop out and therefore be built in Arch [core].
Exactly: quoting the person who closed the original bug report
This is fixed upstream, and the relevant commit is cc: stable, i.e. should find its way to some v3.19.y. Closing, thanks for the report.
-- edit: the patch has been added in the package linux 3.19.3-3, the speed of Archlinux developers is awesome (and this should go also in the 'ooh, nice!' thread).
Issue still occurring. No change with 3-3. It's a strange one.

How to find out what is preventing imac with os x 10.7.3 going to sleep?

What does preventing my inac going to sleep? In the morning before i leave to work everything is sound,but at the lunch time its impossible to put it into sleep mode. Tried to quit all apps,but no success. And every single day same story. Any ideas?

Test after each of the following steps:
Step 1
 ▹ System Preferences ▹ Energy Saver ▹ Power Adapter ▹ Wake for network access: uncheck. You may need to unlock the preference pane by clicking the lock icon in the lower left corner and entering your administrator password.
Step 2
 ▹ System Preferences ▹ Energy Saver ▹ Schedule… ▹ Start up or wake: uncheck
Step 3
 ▹ System Preferences ▹ Print & Scan ▹ Open Print Queue...
Check all printers for unfinished jobs. Deal with any you find.
Step 4
Disconnect all wired peripherals except keyboard, mouse or trackball, and monitor, if applicable.
Step 5
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select All Processes from the menu in the toolbar, if not already selected. Enter “powerd” (without the quotes) in the "Filter" text field. Select the powerd process and click the Quit Process button in the toobar (stop-sign icon.) In the sheet that opens, click Force Quit. You’ll be prompted for your administrator password. The process will be relaunched immediately.
Step 6
Boot in safe mode and log in. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is much slower to boot and run than normal. Don’t launch any applications at first. If sleep still doesn’t work properly, back up all data and reinstall the Mac OS. After that, if you still have the issue, make a “Genius” appointment at an Apple Store to have the machine tested.
If sleep now works as expected, go on to the next step.
Step 7
Still in safe mode, launch the usual set of applications that are running when you have the problem, including your login items, one at a time, testing after each one. Some applications may not work; skip them. You might be able to identify the cause of the problem this way.
Step 8
If sleep is still working after you’ve launched all the usual applications, reboot as usual (not in safe mode) and test again. If sleep still works, you’re done, at least for the moment.
If you still have the sleep issue after booting out of safe mode, post again.

Hello - I used a Sony DVD to burn 350 songs. When I put the DVD into another computer to rip those 350 songs, the 'import songs' button never appeared in the lower right hand corner of iTunes. What's preventing songs from being ripped?

Hello - I used a Sony DVD to burn 350 songs from my iTunes library to share with a friend. When I put the DVD into my friend's computer to rip those 350 songs, the 'import songs' button never appeared in the lower right hand corner of iTunes. Anybody know what's preventing me from ripping what's on the DVD?

When I put the DVD into my friend's computer to rip those 350 songs, the 'import songs' button never appeared in the lower right hand corner of iTunes.
The import command only works with audio CDs. So if you burned the files in mp3 format, try instead using the "File > Add file to library" or "File > Add folder to library" commands.

I have a new iphone. My sister now has my old Itouch. I keep getting her notes and mine are deleted - even without syncing!! We now have separate Apple Ids. Anyone know what can prevent this???

I have a new iphone. My sister now has my old Itouch. I keep getting her notes and mine are deleted - even without syncing!! We now have separate Apple Ids. Anyone know what can prevent this???

make sure the itouch does not have your apple id in the Settings>icloud menu. It is completely different from the App Store.

HT1343 So there is no eject button on the macbook air, what to do to reboot without force?

So there is no eject button on the macbook air, what to do to reboot without force?

Choose Restart from the Apple menu. Or, just press the power button and choose Restart.

When i'm trying to opem Itunes, I get a message that I'm missing MSVCR80.dll on my computer. I have tryies to re-install Itunes, but the problem wasn't solved - what should I do?

When i'm trying to opem Itunes, I get a message that I'm missing MSVCR80.dll on my computer. I have tryies to re-install Itunes, but the problem wasn't solved - what should I do?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99343)

What would prevent AS3 to function in an otherwise working copy...

of Flash CS5.5? I upgraded from Flash 8 to CS5.5 recently. I've used Flash strictly for animations until recently so haven't really tinkered with AS3 at all. I tried some tutorials and got "1120 Property not recognized errors" and assumed that there was something wrong with my settings or my code. After uninstalling, reinstalling, reformatting, and trying several sample files I've found online, it's clear that the AS3 function just is not compatible with my computer. The animation functions work perfectly, but I cannot get the debugger to connect and AS# refuses to recognize any instances on the stage (and, yes, I have triple checked that publish settings are set to do so. ) Is this unusual? What would prevent the AS3 from working when everything else is fine?

Below is a link to an fla I just created that uses your code with the two objects identified by the code. This file is created using CS3. See if it tests okay for you. If so, see what is different about it that might be the cause for yours not working. If not, there are some Adobe folks infrequently in the Flash General forum you might want to try to get the attention of.
http://www.nedwebs.com/Flash/Move_trun.fla

What is preventing my Mac from sleeping?

Ever since installing Lion, both of my Mac Pros don't sleep properly.
When the machine wakes, the Mail notification sound, sounds many, many times. EG: If I have receives 100 emails since sleep, it notifies me 100 times.
How can I tell what is preventing my Mac from sleeping, or is this multiple mail sound something else?

There are few threads in this site discussing the same issue.
Causes sited are
File sharing as mentioned in your post,
Recently installed antivirus software,
External HD not properly ejected,
Print Que not cleared
and Mail constantly checking for new mail that you can change in Mail > Preference >General.
Solutions suggested are
Reset PRAM and SMC
and Repair Disk using Recovery HD.
Best.

HT203433 I cant play that song. What is preventing this?

In my I tunes library on my PC I cant play the songs with a light greg cloud next to them. Alsothe entire line is light greg. What is preventing this?

You need to authorize the computer with that specific Apple ID. If that account's inaccessible, delete the song and then purchase it from your current Apple ID, or click here and ask the iTunes Store staff for assistance.
(110985)

Storage Question: My macbook air says I have 35gb worth of movies. I only have 1 movie that I'm aware of! How do I solve whats eating all this space?

My macbook air says I have 35gb worth of movies. I only have 1 movie that I'm aware of! How do I solve whats eating all this space?
Please help me!!

    Lion OS X 10.7 Lion / 10.8 Mountain Lion
    http://support.apple.com/kb/PH3782
    For more on this and very helpful tips:
    http://pondini.org/OSX/DiskSpace.html
    http://pondini.org/OSX/LionStorage.html

What can prevent NI-DAQ from installing on a computer?

What can prevent NI-DAQ from installing on a computer? I have been using Labview/NI-DAQ for 7 years and have never had this problem before. The s/w does not appear to be installed on machine but when I run the installation cd it does not install anything.Windows NT is the OS. Labview 6.1 and ni-daq 6.9.2 are the versions.

duane wrote:
What can prevent NI-DAQ from installing on a computer? I have been using Labview/NI-DAQ for 7 years and have never had this problem before. The s/w does not appear to be installed on machine but when I run the installation cd it does not install anything.Windows NT is the OS. Labview 6.1 and ni-daq 6.9.2 are the versions.
I was able to remedy problem by using windows explorer to view ni-daq cd and run the nidaq.msi in the nidaq dir. Going this route caused a user window to appear that allows you to remove all / repair etc. I selected the remove all option which then removed whatever had been installed on previous installation. I then went the usual route of control panel\settings\remove s/w to remove the MAX. I then went back and ran setup.exe in the nidaq cd root dir and everything installed properly. The key was the first step mentioned above. The control panel\settings\remove s/w display did not show ni-daq evidently due to prior improper installation which prevented uninstalling this way. The autorun feature of the ni-daq cd did not deal with the improper installation because it would simply say it successfully installed when it did not install any thing. The original installation that improperly installed the ni-daq was when I installed the labview full development system. Everything else installed correctly at that time except for ni-daq. Who Knows?

[Solved] Cannot poweroff/reboot in urxvt

Hi all,
I'm running StumpWM with no desktop environment, and in the past was able to shut down the machine from within an xterm as a regular user using 'systemctl poweroff' (or systemctl reboot to reboot, etc). I recently started using urxvt in daemon mode as my console program because it seemed like a clean solution to having multiple consoles open. From within urxvt, when I try to run systemctl poweroff, I get the following error:
$ systemctl poweroff
Failed to execute operation: Interactive authentication required.
Failed to start poweroff.target: Interactive authentication required.
I can start an xterm and shutdown from there, or use Ctrl-Alt-F2 and log in to a non-X tty and shut down there, all as a regular user.
I've seen other posts where the information in loginctl session-status c1 was requested, so here it is:
$ loginctl session-status c1
c1 - Lefty (1000)
Since: Sun 2014-12-07 16:51:25 CST; 13min ago
Leader: 1104 (login)
Seat: seat0; vc1
TTY: tty1
Service: login; type tty; class user
State: active
Unit: session-c1.scope
├─1104 login -- Lefty
├─3005 /bin/sh /usr/bin/startx
├─3317 gpg-agent --daemon --enable-ssh-support --write-env-file /home/Lefty/.gnupg/gpg-agent.env
├─4525 xinit /home/Lefty/.xinitrc -- /etc/X11/xinit/xserverrc :0 vt1 -auth /tmp/serverauth.SrQT9ulZaj
├─4583 /usr/bin/Xorg.bin -nolisten tcp :0 vt1 -auth /tmp/serverauth.SrQT9ulZaj vt1
├─5502 xf86-video-intel-backlight-helper acpi_video0
├─6155 /home/Lefty/Downloads/Stumpwm/stumpwm/stumpwm
├─7066 xulrunner /usr/share/conkeror/application.ini
├─7097 /usr/bin/dbus-launch --autolaunch be7bdc12ca34453d943a6560e1975268 --binary-syntax --close-stderr
├─7098 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
└─7224 /opt/google/talkplugin/GoogleTalkPlugin
It doesn't look like I'm showing up as a remote user. And the output is the same when run from an xterm. Any idea what I'm doing wrong in urxvt?
Thanks!
-Lefty
Last edited by LeftyAce (2014-12-08 17:09:55)

The wiki page doesn't mention starting the daemon using .xinitrc at all. The section about using the daemon mode only describes two ways to start it through systemd (https://wiki.archlinux.org/index.php/rx … gh_systemd).
At the very least, it looks like I should add a section on using the daemon/client setup in a single user system (through .xinitrc).
Is there a reason someone would _not_ want to run it this way? Does it cause problems for multi-user systems?
EDIT: I updated the page to include .xinitrc instructions and to add a note to the systemd section mentioning the problem with power on/power off. If anyone has more information about why the systemd configuration is desirable I would be happy to add that information as well.
Last edited by LeftyAce (2014-12-08 17:02:23)

[Solved] No graphical poweroff, reboot with a fresh Arch/E17

Hi,
I finalised an arch/E17 install & all is in the topic title...
Commands works in terminal but not in graphical way (they are greyed in graphical syscon module from ctrl+alt+del, suspend/hibernate too)?
I turn around that with keybinds, but it's a bit annoying...
Any idea ?
A+
Last edited by fassil (2013-11-25 17:49:27)

Hi,
Thanks for reply, I have a "cousin" E17 distrib. on the same DD working fine & the two sysactions.conf are identicals...
But I think about a forgotten permission group issue for my user after install ?

[SOLVED] how to prevent suspending/sleeping when closing laptop lid

Hi all,
My laptop, a Lenovo Thinkpad T430u, suspends whenever I close the lid. It's been doing this since I first installed Arch. I want to turn this feature off. How can I do it?
Relevant information:
acpid is installed
the configuration file /etc/acpi/handler.sh
#!/bin/bash
# Default acpi script that takes an entry for all actions
case "$1" in
button/power)
case "$2" in
PBTN|PWRF)
logger 'PowerButton pressed'
logger "ACPI action undefined: $2"
esac
button/sleep)
case "$2" in
SLPB|SBTN)
logger 'SleepButton pressed'
logger "ACPI action undefined: $2"
esac
ac_adapter)
case "$2" in
AC|ACAD|ADP0)
case "$4" in
00000000)
logger 'AC unpluged'
00000001)
logger 'AC pluged'
esac
logger "ACPI action undefined: $2"
esac
battery)
case "$2" in
BAT0)
case "$4" in
00000000)
logger 'Battery online'
00000001)
logger 'Battery offline'
esac
CPU0)
*) logger "ACPI action undefined: $2" ;;
esac
button/lid)
case "$3" in
close)
logger 'LID closed'
open)
logger 'LID opened'
logger "ACPI action undefined: $3"
esac
case $(cat /proc/acpi/button/lid/LID0/state | awk '{print $2}') in
closed) XAUTHORITY=$(ps -C xinit -f --no-header | sed -n 's/.*-auth //; s/ -[^ ].*//; p') xset -display :0 dpms force off ;;
open) XAUTHORITY=$(ps -C xinit -f --no-header | sed -n 's/.*-auth //; s/ -[^ ].*//; p') xset -display :0 dpms force on ;;
esac
logger "ACPI group/action undefined: $1 / $2"
esac
# vim:set ts=4 sw=4 ft=sh et:
dmesg output:
[ 1530.790532] PM: Syncing filesystems ... done.
[ 1530.805678] PM: Preparing system for mem sleep
[ 1530.844445] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 1530.856658] Freezing remaining freezable tasks ... (elapsed 0.10 seconds) done.
[ 1530.963435] PM: Entering mem sleep
[ 1530.963572] Suspending console(s) (use no_console_suspend to debug)
[ 1531.123543] iwlwifi 0000:03:00.0: iwl_pcie_cmdq_reclaim: Read index for DMA queue txq id (9), index 207 is out of range [0-256] 208 208.
[ 1531.124216] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1531.124579] sd 0:0:0:0: [sda] Stopping disk
[ 1531.360682] mei 0000:00:16.0: suspend
[ 1531.440517] ahci 0000:00:1f.2: power state changed by ACPI to D3hot
[ 1531.687309] PM: suspend of devices complete after 722.490 msecs
[ 1531.687784] PM: late suspend of devices complete after 0.469 msecs
[ 1531.688232] pcieport 0000:00:1c.3: System wakeup enabled by ACPI
[ 1531.714222] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 1531.727619] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 1531.754015] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 1531.767422] PM: noirq suspend of devices complete after 79.565 msecs
[ 1531.768301] ACPI: Preparing to enter system sleep state S3
[ 1531.797647] PM: Saving platform NVS memory
[ 1531.799282] Disabling non-boot CPUs ...
[ 1531.900721] smpboot: CPU 1 is now offline
[ 1532.004162] smpboot: CPU 2 is now offline
[ 1532.107554] smpboot: CPU 3 is now offline
I have pmutils and tlpinstalled
tlp config
# tlp - Parameters for power save
# Hint: some features are disabled by default, remove the leading # to enable them
# Set to 0 to disable/1 to enable TLP
TLP_ENABLE=1
# Seconds laptop mode has to to wait after the disk goes idle before doing a sync.
# Non-zero value enables, zero disables laptop mode.
DISK_IDLE_SECS_ON_AC=0
DISK_IDLE_SECS_ON_BAT=2
# Dirty page values (timeouts in secs).
MAX_LOST_WORK_SECS_ON_AC=15
MAX_LOST_WORK_SECS_ON_BAT=60
# Select a cpu frequency scaling governor: ondemand/powersave/performance/conservative
# Important:
# - You *must* disable your distribution's governor settings or conflicts will occur
# - ondemand is sufficient for *almost all* workloads, you should know what you're doing!
#CPU_SCALING_GOVERNOR_ON_AC=ondemand
#CPU_SCALING_GOVERNOR_ON_BAT=ondemand
# Set the min/max frequency available for the scaling governor.
# Possible values strongly depend on your cpu. For available frequencies see
# tlp-stat output, Section "+++ Processor".
# Hint: Parameters are disabled by default, remove the leading # to enable them,
# otherwise kernel default values are used.
#CPU_SCALING_MIN_FREQ_ON_AC=0
#CPU_SCALING_MAX_FREQ_ON_AC=0
#CPU_SCALING_MIN_FREQ_ON_BAT=0
#CPU_SCALING_MAX_FREQ_ON_BAT=0
# Set the cpu "turbo boost" feature: 0=disable / 1=allow
# Requires an Intel Core i processor and kernel 3.7 or later.
# Important:
# - This may conflict with your distribution's governor settings
# - A value of 1 does *not* activate boosting, it just allows it
#CPU_BOOST_ON_AC=1
#CPU_BOOST_ON_BAT=0
# Minimize number of used cpu cores/hyper-threads under light load conditions
SCHED_POWERSAVE_ON_AC=0
SCHED_POWERSAVE_ON_BAT=1
# Kernel NMI Watchdog
# 0=disable (default, saves power) / 1=enable (for kernel debugging only)
NMI_WATCHDOG=0
# Change CPU voltages aka "undervolting" - Kernel with PHC patch required
# Freq:voltage pairs are written to /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
# CAUTION: only use this, if you thoroughly understand what you are doing!
#PHC_CONTROLS="F:V F:V F:V F:V"
# Hard disk devices, separate multiple devices with spaces (default: sda).
# Devices can be specified by disk id too (lookup with: tlp diskid).
DISK_DEVICES="sda sdb"
# Hard disk advanced power management level: 1(max saving)..254(off)
# Levels 1..127 may spin down the disk.
# Separate values for multiple devices with spaces.
DISK_APM_LEVEL_ON_AC="254 254"
DISK_APM_LEVEL_ON_BAT="128 128"
# Hard disk spin down timeout:
# 0: spin down disabled
# 1..240: timeouts from 5s to 20min (in units of 5s)
# 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
# (see 'man hdparm' for details)
#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
# Select io scheduler for the disk devices: noop/deadline/cfq (Default: cfq)
# Separate values for multiple devices with spaces.
#DISK_IOSCHED="cfq cfq"
# SATA aggressive link power management (ALPM):
# min_power/medium_power/max_performance
SATA_LINKPWR_ON_AC=max_performance
SATA_LINKPWR_ON_BAT=min_power
# PCI Express Active State Power Management (PCIe ASPM):
# default/performance/powersave
# Hint: needs kernel boot option pcie_aspm=force on some machines
PCIE_ASPM_ON_AC=performance
PCIE_ASPM_ON_BAT=powersave
# Radeon graphics clock speed (profile method): low/mid/high/auto/default
# auto = mid on BAT, high on AC; default = use hardware defaults
# (Kernel >= 2.6.35 only, not with fglrx driver!)
RADEON_POWER_PROFILE_ON_AC=high
RADEON_POWER_PROFILE_ON_BAT=low
# WiFi power saving mode: 1=disable/5=enable
# (Linux 2.6.32 and later, some adapters only!)
WIFI_PWR_ON_AC=1
WIFI_PWR_ON_BAT=5
# Disable wake on lan: Y/N
WOL_DISABLE=Y
# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
# A value of 0 disables / >=1 enables power save.
SOUND_POWER_SAVE=1
# Disable controller too (HDA only): Y/N
SOUND_POWER_SAVE_CONTROLLER=Y
# Set to 1 to power off optical drive in UltraBay (ThinkPads only)
# when running on battery. A value of 0 disables this Feature (Default).
# Drive can be powered on again by releasing (and reinserting) the
# eject lever or by pressing the disc eject button on newer models.
# Note: an UltraBay hard disk is never powered off.
BAY_POWEROFF_ON_BAT=0
# Optical drive device to power off (default sr0)
BAY_DEVICE="sr0"
# Runtime Power Management for pci(e) bus devices
# (Kernel >= 2.6.35 only): on=disable/auto=enable
RUNTIME_PM_ON_AC=on
RUNTIME_PM_ON_BAT=auto
# Runtime PM for *all* pci(e) bus devices: 0=disable / 1=enable
# Warning: experimental option, could cause system instabilities
RUNTIME_PM_ALL=0
# Set to 0 to disable/1 to enable usb autosuspend feature
USB_AUTOSUSPEND=1
# Devices from the following list are excluded from usb autosuspend
# (separate with spaces). Use lsusb to get the id's.
# Note: input devices (usbhid) are excluded automatically
#USB_BLACKLIST="1111:2222 3333:4444"
# Set to 1 to disable autosuspend before shutdown/0 to do nothing
# (workaround for usb devices that cause shutdown problems)
#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
# Restore radio device state (bluetooth, wifi, wwan) from previous shutdown
# on system startup: 0=disable/1=enable
# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
# are ignored when this is enabled!
RESTORE_DEVICE_STATE_ON_STARTUP=0
# Radio devices to disable on startup: bluetooth wifi wwan
#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
# Radio devices to enable on startup: bluetooth wifi wwan
#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
# Radio devices to disable on shutdown: bluetooth wifi wwan
# (workaround for devices that are blocking shutdown)
#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
# Radio devices to enable on shutdown: bluetooth wifi wwan
# (to prevent other operating systems from missing radios)
#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
# Radio devices to enable when wireless radio switch is turned on:
# bluetooth wifi wwan (Ubuntu + ThinkPad only)
#DEVICES_TO_ENABLE_ON_RADIOSW="wifi wwan"
# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module required)
# Charging starts when the remaining capacity falls below the START_CHARGE_TRESH
# value and stops when exceeding the STOP_CHARGE_TRESH value.
# Main battery (values in %)
#START_CHARGE_THRESH_BAT0=75
#STOP_CHARGE_THRESH_BAT0=80
# Ultrabay or slice battery (values in %)
#START_CHARGE_THRESH_BAT1=75
#STOP_CHARGE_THRESH_BAT1=80
# Set to 1 to disable use of tpacpi-bat on Sandy Bridge or newer Thinkpads
# and force usage of tp-smapi instead
#DISABLE_TPACPIBAT=1
# tlp-rdw - Parameters for the radio device wizard
# Possible devices: bluetooth/wifi/wwan
# Hint: parameters are disabled by default, remove the leading # to enable them
# Radio devices to disable on connect
DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
# Radio devices to enable on disconnect
DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
# Radio devices to enable/disable when docked
#DEVICES_TO_ENABLE_ON_DOCK=""
#DEVICES_TO_DISABLE_ON_DOCK=""
# Radio devices to enable/disable when undocked
#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
#DEVICES_TO_DISABLE_ON_UNDOCK=""
thanks guys
I love arch
Last edited by beitme (2013-06-08 10:05:37)

@ Karol, done
@ 65kid, here's my logind.conf
[Login]
#NAutoVTs=6
#ReserveVT=6
#KillUserProcesses=no
#KillOnlyUsers=
#KillExcludeUsers=root
#Controllers=
#ResetControllers=cpu
#InhibitDelayMaxSec=5
#HandlePowerKey=poweroff
#HandleSuspendKey=suspend
#HandleHibernateKey=hibernate
#HandleLidSwitch=ignore
#PowerKeyIgnoreInhibited=no
#SuspendKeyIgnoreInhibited=no
#HibernateKeyIgnoreInhibited=no
#LidSwitchIgnoreInhibited=yes
#IdleAction=ignore
#IdleActionSec=30min

[SOLVED] What is preventing Poweroff/Reboot?

Similar Messages

Maybe you are looking for