[SOLVED] What is the best way to use ZFS on linux-ck?

Hi, I've recently gotten into ZFS to replace my Intel FakeRaid array I had set up for my /home folder. All is well under the stock kernel, but I'm running into issues while trying to run it under linux-ck.
At boot systemd throws a fit, and in the emergency shell it seems that -CK cannot use the installed module (module not found). I noticed that the versions for -ck and -arch are currently slightly different, and tried recompiling -ck to match -arch's version to no avail.
Inspecting the PKGBUILDs for the zfs packages, it looks like they're designed to be built for the current [core] version of the stock kernel only, which would explain why -ck can't see the zfs module.
Is there an elegant, semi-automatic way to go about maintaining zfs/spl so that I can keep it up-to-date for the current linux-ck version?
Thanks!
Last edited by SirWuffleton (2014-05-09 11:22:06)

graysky wrote:You will need to change the PKGBUILDs for zfs-git/spl-git to require linux-ck and linux-ck-headers rather than linux and linux-headers.
Okay, I was thinking it would be something along those lines. Thanks for the clarification.
After I modify the PKGBUILDs to use linux-ck, I should be able to build the modules against -ck even if I'm currently running -arch, correct? Just want make sure, since I'd like to avoid breaking ZFS on both kernels at the same time so I don't have to deal with some awkward situation where I need to build the modules against -ck from the emergency shell or something.

Similar Messages

What is the best way to use a cellular enabled iPad in France?

What is the best way to use a cellular enabled iPad in France?

Frankly, I expect a bit more courtesy and details from someone wanting help from fellow users.
Don't use your AT&T SIM/plan out of the country for the iPad.
Just purchase a SIM in France for about 15 euros and use that.
-> http://www.tripadvisor.com/ShowTopic-g187070-i12-k4781004-o30-Prepaid_French_3G_ micro_SIM_for_iPad_it_s_not_a_problem-France.html

What's the best way to use your iPad instead of textbooks?

What's the best way to use your iPad instead of textbooks? I'm about to start a BSN program and have heard of using your iPad for textbooks instead of buying and carrying around 8 different books. Is there an app for that? Or do you buy or rent the books? What's the best solution?

Or, if you're like me and you want to do a lot of heavy reading, use the iPad because the low contrast on a Kindle is extremely fatiguing.
Seriously, though "screen glare will cause eye strain" is often taken as an article of faith, there's not a lot of good scientific evidence for it. "Eye strain" can be caused by concentrating on any close work for long periods of time. Looking up and focusing on something distant periodically is very helpful. Older CRT screens that flicker also can be aggravting. I'm not denying that some people find reading backlit screens uncomfortable. However, it's not dangerous. And, then, there are other people who find the higher contrast a backlit screen affords to be much less wearying over long periods of time.

What is the best way for using a C++ in the EJB?

What is the best way for using C++ in the EJB ie
either 1. Socket programming
2. JNI

To what purpose?
To use C++ in the client you could generate IDL from your remote interfaces and run that through your vendor's IDL-to-C++ processor.

What is the best way to use Berkeley DB, C or C++ interface ?

Hello,
I'm using C++ interface but much samples, solutions and utils are in C.
What is the best way to use Berkeley DB, C or C++ interface ?
Lets talk a little about this...which is the interface you prefer and why ?
Thanks
DelNeto

Hi DelNeto,
There is a complete documentation set for C, C++ and Java. There are also examples in all 3 languages in the examples directories in your kit.
http://www.oracle.com/technology/documentation/berkeley-db/db/index.html
Ron

What is the best way to use recovery files

I am working in FM 11 and have crashed FM a few times. What is the best way to use the recovery files and save them as the normal file? Then should I filter an explorer window for "recovery" so FM won't keep asking me if I want to use older recovery files? Thanks for your help.

> What is the best way to use the recovery files ...
Use a .recover file to extract only the new/changed content that would otherwise be lost if you were instead to open the .auto (if any), or .backup files.
> ... and save them as the normal file?
Don't. If the document crashed because of an internal data structure problem, the .recover file (although actually a MIF) is apt to contain that problem.
Before doing anything, preserve the debris. Copy the .backup and .auto files in particular, because as soon as you open the main .fm file, it's going to overwrite that .backup, and then the .auto at the next auto-save interval. You can dispose of any zero-length files or files with temporary names (which result from the crash itself crashing).
I typically:
preserve a snapshot of the debris
open the original file, and if it won't, the .backup
open the .recover, .auto or .backup (whichever seems the most useful candidate as a sourcing file)
copy in the changes from the .recover, .auto or .backup to the working copy
save the working copy as the original.fm, close the sourcing file
do a MIF wash on the new original.fm
clean up the debris in preparation for the next crash

What is the best way to use Airport Express?

What is the best way to use Airport Express?

It would really depend on your networking goals.
The AirPort Express can be used for a number of things:
Internet router
Wireless Access Point
Ethernet switch
Wireless Ethernet bridge
Network print server
AirPlay speaker
Portable travel router
... or some combination of the above.

What is the best way to use wi-fi to transfer pdf files from an ipad to a mac mini, not using an internet, just wi-fi.

What is the best way to use wi-fi to transfer pdf files from an ipad to a mac mini, not using an internet, just wi-fi?

If the Mac use Lion (10.7) you can use Airdrop for that.
With Mac's not using Lion you may set up a computer to computer (ad hoc) connection.
How to --> http://docs.info.apple.com/article.html?path=Mac/10.6/en/8339.html
Lupunus

What is the best way to use a SSD for Photoshop/photo editing?

Computer hardware newbie here: I do a significant amount of photo editing work and for a very long time I've experienced Photoshop, Bridge and Photomatix crashing constantly (usually due to insufficient RAM) or just generally taking forever (Bridge took forever to load the thumbnail/preview extractions in a folder full of images, Photoshop took forever to save images and Photomatix took ages to load/merge a set of bracketed photos). Here are the typical error messages I'd get: http://pastebin.com/J9byczse
As a professional photographer, constantly running into that sort of thing is quite aggravating, so to hopefully avoid ever having to deal with that again I invested in a new custom built computer. It's Windows 7 Professional 64 bit with 32GB of RAM and a 240GB SSD; I'm using the 240GB SSD as my boot drive/OS, all of my programs are installed there, and the page file. My photos and data are stored on several HDDs. I have yet to install any of my photo editing software (Photoshop CS6 Extended, Lightroom, Photomatix etc) to the new computer yet since I'd like some advice first.
My basic question is this: what is the best way to take advantage of the SSD (and the computer in general) when it comes to my photo editing software?
Specifically...
1. If I have a folder of photos I'm working on, should I move it to the SSD and then work on them from there in order to take advantage of the speed of the SSD? Would this make any difference in terms of speed if the photos are located on the SSD vs. an internal/external HDD?
2. Most of what I've read online seems to recommend two separate SSDs, one for installing/booting the apps and one for cache/scratch. Does it matter if I use my 240GB SSD for both?
3. This is a fairly new computer and the SSD is already almost half full (102GB used, 120GB free) *WITHOUT* any of my photo editing software installed yet. I'm concerned about how fast that remaining 120 GB may fill up. As it fills up will I lose the speed advantage of the SSD vs. a regular HDD?
4. Sort of similar to #3, but should I bother moving any of my other non-photo editing programs/caches off of the SSD to a HDD and would there be any major difference in the speed/lifespan of the SSD if I did so? It's mostly Firefox and Chrome and their caches that I'm concerned may be a problem if they remain on the SSD.
Thanks for any help!

If you have an SSD you can run the cache and programs on the same drive. However, many recommend a scratch disk size of 100-200 gigs so that will not work here unless you opt for a larger SSD. Otherwise an internal spinner is recommended that does not contain the program files, or idealy any other files that may want to get acessed at same time (only one read/write head per drive).
With 32 gig of RAM you may not need the constant use of the scratch drive unless working on large images with lots of layers. So see no advantage to moving folder to SSD for temp work environment.
From what I read the new crop of SSD do not have the wear problems of the older versions.

[SOLVED] What is the best way to load iptables/nftables on boot?

Hi -
New arch user migrating from Ubuntu/debian. I'm used to loading netfilter iptable rules using an /etc/network/interfaces file. What is the best way to do this using netctl/systemd?
An RTFM of the wiki and a Google search didn't provide an answer, but maybe I'm just looking in the wrong places.
Last edited by pgoetz (2014-06-21 08:32:01)

Ah, OK -- got it. I can just blindly enable the iptables.service, and systemd will make sure the interfaces are up before running the service. How cool. I'm still getting used to the luxury of not having to worry about stuff like this myself. The only minor issue is it looks like I'll have to get the systemd nftables service out of AUR.
Last edited by pgoetz (2014-02-24 19:58:53)

[Solved] What's the best way for me to help with Arch?

I've been using Linux for about 10 years and Arch for a little over a year. I used to do a lot of distro-hopping but I've found that since finding Arch, I haven't been doing much of that. I don't know why it took me so long to find it.
Anyway, I'd like to give back a little so what's the best way for me to help? I'm not a programmer so I'd be no help there. I have made a couple contributions to the wiki and filed a bug. I know that kind of stuff is easy and obvious. Is there anything else I could be doing?
Last edited by brianhanna (2010-04-07 02:25:34)

I hear the Arch Linux Magazine could always use some contributions, if you're inclined towards that sort of thing. I've been wanting to write an article for a while, but I've not run into anything in my Arch experience so far that's really inspired an article out of me.

What is the best way to use single shot drum sounds?

I have a huge collection of wav. format single sound drum sounds that I use in FL Studio. What is the best way to program drums in GB using them besides buying iDrum? I like the flexibility of using drums from different kits when I make my music so I kind of get board using a preset drum kit from GB even layering 3-4 kits isn't as nice as choosing each individual drum sound.

Would be great to have more info but on a 24fps timeline with 24fps footage, you can simply right click and change the speed/duration to whatever. It'll be more jittery than smooth 60fps slow-mo. If your footage is shot at 60fps and you are editing on a 24fps timeline, just select the clip and right-click and choose MODIFY>Interpret footage and change the fps to 23.976 and you're done. Now when you drop that clip on the timeline it's in smooth slow-mo. Or, you can just toss the original clip on the timeline and change the speed/duration setting to 40%. Pretty much the same thing although the former is better if you need to add any warp stabilization to the clip. Anything you want to speed back up you can either duplicate the clip in the project panel and change it back to the original frame rate OR you can simply adjust it on the timeline to 250% speed which is back to normal. Good luck!

[Solved] What is the best way to share pacman cache ?

I'm wondering what is the best way to share the pacman cache .
I went with the obvious choice 'sshfs' . But the cache on the server is owned by root so I can't use it dynamically unless I enable root logins , right ?
Is it safe to enable root logins and mount with the root user ?
What is the best and safest way to share pacman cache dynamically ?
Last edited by Nezmer (2008-12-07 01:13:20)

Interesting. I use sshfs and yes use root login to do business. But I see it this way you want more security created a stronger password. You want more security than that disable passwords and use keys. But once you start NFS you are surely introducing some security issue just as if you enable root ssh login, so why is NFS better?
Just asking out of interest, I claim to know nothing about security.

What is the best way to use EJB modules with JAX-WS?

Hi.
I am doing a project that returns EAN13 encoded data to external java clients.
I think I need to use a webservice that send response, a webservice client that send the request, and other project that transforms a data to an EAN encoded data, returns it and store it in MySql database.
It is possible that I need to authenticate users for every request made.
-I have created a EJB module contained into Glassfish for the webservice
-I have created a Common Java project with 3 layers: Entities, bussines and data access layer for mysql database
-I have a project for the webservice client with JAX-WS ( is the best choice? or Would be better JAX-RPC? )
**How would you suggest me create the structure of the project with all the java power?*
**Could you help me with goods tutorial of design patterns about webservices using EJB and the best way for use databases for this kind of projects ( I have heard about JNDI, Hibernate, Session EJB, ... )?*
**Would be better use other EJB module instead of a Common java project that has classes?*
h3. {color:#333399}I shall be pleased with your help{color}

Kappy is dead on correct about Bridge Mode as a requirement for the Time Capsule.
Do you know how to check to see if the Time Capsule is configured this way?
Next question.....you really should not try to have two wireless networks....one Arris and another Time Capsule.....unless it is absolutely necessary. Two wireless routers in close proximity can create wireless interference effects that can cause problems with either...or both...networks.
Best to turn off the wireless on one router to keep the chances of wireless interference between routers minimized.
Are both the Arris and Time Capsule providing wireless signals?

1163R... What is the best way to use the 1163R.

I need to record voltage on the SCXI 1121 as soon as the 1163R is switched. What is the best way to do this.

Hi,
You may want to take a look at following:
Link 1
Link 2
I know my answer is very general. You may want to elaborate on your question and I will try my best.
Sincerely,
Sastry

[SOLVED] What is the best way to use ZFS on linux-ck?

Similar Messages

Maybe you are looking for