[SOLVED] why is php-apache not automatically configured?
I tried installing php-apache recently and found that I needed to add the "LoadModule" and "Include"-directive for the php5 module manually to my httpd.conf. Anyone explain to me why this is not done automatically upon installation? Just out of curiousity. Thanks!
Last edited by awayand (2011-05-23 11:56:28)
Ok thanks! I thought I had missed something or maybe that I should have installed php-apache before apache or something...
Similar Messages
-
I'm sending an iMessage from my iPhone to another iPhone but the recipient phone does not receive message because not on wifi. Why does recipient iPhone not automatically receive in text messaging?
Wi-Fi is not required for iMessage. Internet access is required for iMessage which includes when the iPhone is connected to the cellular network.
If an iMessage cannot be sent, it will fail to send and you will be prompted to send as an SMS if text only. -
As long as I have been in the job and we have been using IE as our browser, we have controlled the proxy settings with an automatic configuration file.
Recently, with IE8 on WinXP and Win7, we have had situations with the user getting various connectivity errors. By unchecking the "use automatic configuration script" box, they start working. But we don't change anything else.
These error are not consistent from machine to machine.
We are in a AD Domain environment
These are the two errors I have documented.
Error: 5
Description: The 'Microsoft.ACE.OLEDB.12.0' provider is not registered on the local machine.
Access to resrouce is forbidden by server while attempting to access server at
http://content.mpl.org/cgi-bin/admin/pwtest.exe?CISOVER=60.
Please check the permissions to the file on th eserver.
Two very different problems. Both somehow fixed by unchecking the box.
The config file itself has not been changed in over a year.
Can anyone explain why unchecking this box, but not making any other changes to the proxy settings would fix connectivity problems? These are all external sites that need to go through the proxy.
Thanks.Hi,
You can use the steps in the following thread to disable this option:
uncheck "use automatic configuration script" in IE LAN settings
http://social.technet.microsoft.com/Forums/en-US/winserverGP/thread/05a7c683-075e-435c-8583-da8fd3559cf2
Or try to
reset Internet Explorer settings and select use automatic configuration script to see whether it could work.
Hope this helps.
Vincent Wang
TechNet Community Support -
I have had this ongoing problem. I cannot get images to automatically load in mail. Instead I always have to click the load images button. I click on a message, click load images, the images load. I click on another message, then back to the message with the images and have to reload them.
In preferneces I have turned the View>Load remote HTML images on and off and on again, and rebotted multiple times. It makes no difference. The images do not load.
I checked Little Snitch, but all ports are open.
My firewall is set to let everything connect to mail. Even just turning off the firewall does not solve the problem.
I tried removing com.apple.mail.plist but that did not work either.
This problem occurs in Mail on a MacBook Pro and on a MacBook Air both using the newest version of OS Mountain Lion. The problem happened in OS Lion as well.
The senders are in my contacts, so that doesn't help either.
This is not an issue with the serve sending the images. The images load if I click load images. They just will not automatically laod.
I've read tons of posts but no one seems to know how to solve the problem.
Does anyone have any other ideas?I am not sure how to link these discussions, so below I am pasting the post that helped me. And here is the link:
https://discussions.apple.com/message/15733241#15733241
louse101
Jul 25, 2011 3:17 AM
This is not a problem specific to Lion, but most recent OS X versions. Regularly I receive email formatted as HTML, which includes JPEG images embedded within them. These images are technically attachments, and as such, Mail.app displays them as a placeholder. Other mail apps will display these images inline, regardless of them being an attachment, remote image or otherwise.
How can I make these images load automatically?
MacBook, Unibody, Mac OS X (10.7), 750GB, 7200RPM WD HDD, 4GB RAM
This solved my question by louse101 on Jul 26, 2011 3:47 AM
No-one replied, but I found a solution on another board. Run Terminal (do a Spotlight search if you don't know where to find this), and type:
defaults write com.apple.mail DisableInlineAttachmentViewing -bool false
This will force Mail not to disable inline attachment viewing. Obviously, to reverse this, simple replace 'false' at the end with 'true'.
See the answer in context -
Oracle & PHP/Apache not working togather for unicode (working individually)
hi, i have oracle xe zend core for oracle installed.
When i insert data through aplication express or oracle sql developer its perfect. Unicode can be inserted and viewed, but when I try to view same data through php script it display ??? signs only english character show properly.
Seems the unicode enviourment issue with php/apache and oracle communication, as php pages display uniode correctly when not taking data from oracle. I need help
I have gone through globlizing_oracle_php_applications.pdf and have enabled mbstring, also php charset is utf8 i also used 'AL32UTF8' in connection string.
Also if someone can provide a small sample php script to insert or view unicode data.
thanksroot the php module seems to be not working as the
displayed index.php was just text page. I tried with
apache2 as well but the result was the same.I don't believe the apache included with Solaris 10 includes PHP support; you will probably have to re-compile it . See the README file in /etc/apache for the actual config of the distributed version. -
Php-apache not in repositories
Hi. I'm following this tutorial: https://wiki.archlinux.org/index.php/LAMP and i need to get "php-apache"... I have installed php5, apache2, and mysql. They are all working. Then I read in the tutorial that I need php-apache. Pacman doesnt find it ! What do i do ? What is it even ? I cant find it anywhere.
regards
EDIT: Nevermind, the nex day all of a sudden it finds the correct packages...
Last edited by sko0 (2011-04-02 14:13:02)% pacman -Si php-apache
Repository : extra
Name : php-apache
Version : 5.3.6-1
URL : http://www.php.net
Licenses : PHP
Groups : None
Provides : None
Depends On : php apache pcre libxml2
Optional Deps : None
Conflicts With : None
Replaces : None
Download Size : 1662.10 K
Installed Size : 8036.00 K
Packager : Pierre Schmitz <[email protected]>
Architecture : x86_64
Build Date : Sat 19 Mar 2011 12:44:22 PM EET
MD5 Sum : f7f694576f9c48efde405c857e34547b
Description : Apache SAPI for PHP -
In any other browser I've used (or word processor, for that matter) when I select text using my mouse cursor, if I start and/or end in the middle of a word, it automatically selects the whole word when I'm selecting more than one word. But for some reason this is not happening in Firefox. If I try to select say 3 words, and I start in the middle of the first word and end in the middle of the last word, it will only select those parts, not all 3 words entirely.
Firefox allows to select part of a word. You can select a word with a double click and use Shift + left click to set the end of the selection, so you need to click at the end of the last word instead of in it.
-
[SOLVED] Amarok 2.7 will not Save configuration
I have a bizarre issue with Amarok 2.7 running on KDE 4.10.1. I have a share on my server which is configured using Samba where all my music is stored. I have this share mounted at /home/user/Music on my laptop.
My uid on the laptop is 1001, and the uid of my user account on the server is 1001. When I configure Amarok to use /home/user/Music as the source folder for the local collection it fails to save the configuration. That is to say that whether I use 'apply' 'OK' or both for that option, when I re-open the configuration dialogue nothing is selected. As a result the local collection is never scanned, and so there is no music available to the application.
The share is mounted using this line in /etc/fstab:
//server.home.dev/sharedfolders/Music/<user> /home/<user>/Music cifs x-systemd.automount,creds=/home/<user>/pncreds,uid=<user>,gid=users 0 0
I have checked the ownership of the mounted Music directory, which appears to be correct. My user has rwx permission on the directory, and on all of the sub-directories and contents.
I thought I would re-apply the permissions just to be sure. When I attempted to do this from the client I got permission denied whether I tried to do it as my user or root. I tried re-applying the permissions on the underlying share. which was successful, but made no difference.
As far as I can see everything is set up correctly so I cannot make sense of why the application cannot save or use the configuration. I am starting to wonder whether this is a bug in the application. Has anyone else seen this issue or one similar?
Last edited by pfnorris (2013-04-05 15:26:13)I think this problem is releated to switching MariaDB rather than a permissions issue. Try the steps described in the news:
https://www.archlinux.org/news/mariadb- … ositories/ -
In previous versions, once I launched Outlook, it would automatically detect/passthrough my username and email address into the fields so that I could just click next and be done. In Outllok 2013 on Windows 2008 R2 this doesn't appear to be working even
thought I am able to successfully resolve my autodiscover domain.Hi,
Is there any error when you can’t connect your Outlook 2013 to Exchange 2007?
If the autodiscover service is configured correctly, please change a computer to have a try. In this local windows 2008 R2, please check the following settings in Internet Explorer:
Click Settings > Internet Options > Connections > LAN settings, please make sure there is no proxy server set there. Only “Automatically detect settings” option is checked.
Regards,
Winnie Liang
TechNet Community Support -
Insttalling Airport Card - does not automatically configure
Any ideas to get a perfectly good Airport Card working? Bought new, worked fine; then had to put in other Mac to test networking. Upon putting back in the original machine, I am unable to configure properly. Thanks.
Message was edited by: KGDThe PCI PowerMac G4 has no built-in capability to accept airport cards, except through third party PCI adapter cards, and external ethernet LAN port sharing on a WiFi access point/airport base station.
The PowerMac G5 uses a different type of airport card, and the card used in a PowerMac G5 can't be used in an AGP PowerMac G4. Starting with the PowerMac G4 Firewire 800 and PowerMac G5s Apple used Airport Extreme cards, which are not compatible with older PowerMac G4s, and the older PowerMac G4s original airport card can't be used with the newer models.
So don't try to mix and match cards unless you know they are compatible:
http://support.apple.com/kb/HT3024?viewlocale=en_US
http://www.info.apple.com/kbnum/n106777 -
[SOLVED] Why the complaint var not empty?
Hi,
I'm on a fully updated Linux_X86-64/KDE with a separate /var partition.
The boot journal complaints that /var directory is not empty (below), although I believe that's a normal state.
Please advise!
Thnaks
-------relevant part of journalctl-----------
Sep 04 12:14:23 miki_desk systemd[1]: var.mount: Directory /var to mount over is not empty, mounting anyway.
Sep 04 12:14:24 miki_desk systemd-journal[190]: Time spent on flushing to /var is 126.236ms for 1025 entries.
and the relevant line in my fstab is
# /dev/sdb3 LABEL=Var
UUID=f3d0d861-1faf-4f69-8aae-81c2974b15c1 /var ext4 rw,relatime,data=ordered 0 2
Last edited by mibadt (2014-09-06 02:34:34)Hi all,
I've found that (within my Arch):
Besides the expected /var (on my separate partition), there is no /mnt/var on my system, yet there is a /usr/var.
This folder contains a single 109b "grandson" (into second level directory inside above) file dated May 27th name "interpreter". No other files there.
Below you can see that var location, contents and structure.
Can I delete it altogether?
Thanks
------------/usr/var/----------
/usr/var/lib/iscan $ ls -al
total 12
drwxr-xr-x 2 root root 4096 May 27 11:50 .
drwxr-xr-x 3 root root 4096 May 27 11:50 ..
-rw-r--r-- 1 root root 109 May 27 11:50 interpreter
miki /usr/var/lib/iscan $ cd ..
miki /usr/var/lib $ cd ..
miki /usr/var $ tree
└── lib
└── iscan
└── interpreter -
Junk mail not automatically moved to Junk folder
Hello.
I'm using an IMAP account and have configured Mail to move junk mail to the chosen junk mail folder (junk is not filtered on the server but on my client). Since the junk mail filter is still learning sometimes junk mail is not detected and still goes to the inbox. That's okay.
If I then select that message it is somehow miraculously detected and marked as junk. However, it is not automatically moved to the junk folder but remains in the inbox marked as junk?
Is this desired behaviour? Why is the mail not automatically moved to the junk folder, like it is when I manually mark a mail as junk?
Thanks in advanceI just happened to notice that even mail that is automatically marked as spam/junk remains in my inbox. So I open the inbox folder and there is message that is marked as junk. Only when I manually reset and set the junk status is the message moved to the junk folder.
This seems to be the case in an IMAP acount where all folders (sent, drafts, spam, etc.) are subfolders of the actual inbox folder.
Is anyone else experiencing this behaviour?
Thanks in advance -
I have setup an extended network in my home using an Airport Extreme and an Airport Express. The Extreme is connected directly to the FiOS modem and the Express is being used as the extender. The nework is setup fine, but my devices (MBA, iPhone, iPad) are not switching base stations when the signal becomes poor on the one it's connected to. For example, I am upstairs with my MBA and a great signal as I am connected to the Express. When I move downstairs to where the Extreme is setup, the Wi-Fi connection becomes poor even though I am litterally sitting next to the Extreme. To force it to connect to the Extreme, I need to shutoff the Wi-Fi on the MBA and turn back on. At this point, the MBA will connect to the Extreme with a excellent signal.
Any thoughts on why the MBA is not automatically switching?
Thanks for the help!
BrianThe first troubleshooting step for any kind of network "issue" is a complete power cycle of the network. This gives everything a "fresh start" with new connections.
Power off the entire network.....all devices....in any order you want
Wait a minute or two
Start the modem/router first, and let it run a full minute
Start the AirPort Extreme next and let it run a full minute
Keep starting devices one at a time about a minute apart until the entire network is back up
Check the network again with the MBA and report on your results
Do not worry about the iPhone and iPad....they are pretty much hopeless as far as automatically switching from one access point to another....but the MBA should if it is working correctly. -
Hi. I am working on a Mac OSX 10.10.2 Yosemite. I'm working remotely with a woman who is using indesign CS8.2 I'm still on CS6.8 and can't open her files. I would like to upgrade to the latest version and I'd also like to know why these upgrades are not automatic as i pay a monthly subscription to the cloud. Thanks.
A Cloud subscription SHOULD always show you the most recent updates, so you may then choose to do the install
CC desktop lists applications as "Up to Date" when they are not
-http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html
-and added step https://forums.adobe.com/thread/1529654
Yosemite sometimes has problems, often related to "default" permissions needing to be changed
-one person's solution https://forums.adobe.com/thread/1689788
-and a Java update https://forums.adobe.com/thread/1507936
-update breaks things https://forums.adobe.com/thread/1772260
-http://blogs.adobe.com/creativecloud/creative-cloud-and-yosemite/
-https://helpx.adobe.com/x-productkb/global/mac-os-yosemite-compatability.html -
Safari 3 - History does not automatically clear
I have selected in my Safari Preferences for the history to automatically clear after one day. After waiting a week, it has not cleared. I have the same setting on both of my macs (I have an iMac and a PowerBook G4), but Safari has not cleared the history automatically on either of them.
Does anyone know why the history is not automatically clearing? Is anyone else having this issue?So the issue is only that it will not automatically clear?
Does it clear when you Reset Safari?
(menu bar > Safari > Reset Safari)
Can you test this in a new user.
Create a new test user account.
(Top left Apple > System Preferences > Accounts > unlock bottom right padlock > click '+' > username: test > Create account)
Log out of current account, then login to test
(Apple > Logout > choose Test)
Then test for a while and see if the history automatically clears.
Note: You will have to go through and set up these options again in Safari.
If it doesn't work, you may need to Software Update, or delete Safari and Reinstall...
or just reset your safari every now and then
Maybe you are looking for
-
Remote access the airport extreme usb hard drive over the internet with multiple users?
I just purchase the new airport extreme 802.11n and set it up on my LAN behind a comcast modem with broadband. I plugged a 3 tb Seagate hard drive formatted with fat32 (default) to it and have set it up for access for all of my computers, ipad, ipho
-
Phone : IPhone 6 OS : 8.1 Problem Statement : Multiple Selection of Recipients while drafting New Message in SMS. Expected Solution : Checkbox should have been provided to select multiple contacts using one screen
-
Productwise Balance Sheet & Profit and Loss account
Dear All, We have the unique scenario. We have the 5 plants and one product we are manufacturing this produect across all the 5 plants. In future we are planning to mfg more products. Request you to let me know how to get productwise balancesheet and
-
I need to parse an xml document returned by a web-service. It does not, nor do we want it to, follow any SOAP or wdsl standard.. However I still need to parse it (hence the flex becomes unflexible). Some of the nodes names in the xml document have da
-
Firefox is configured to use a proxy server that is refusing connections.