{SOLVED} Wicd works in KDE but not in Enlightenment

Greetings all,
I searched the Wiki as well as Google for this issue and though I have found a few random forum questions pop up, none of them reflected the issue that I am having.
I have both KDE and Enlightenment installed.  Easy to switch between the two of them but I like Enlightenment more and want to use it.  Problem I have is, when I first ran Enlightenment, it prompts you with a selection of various programs to install.  Amongst others, I chose Wicd because that is what I having up and running great in my KDE desktop.
When I click on Wicd in Enlightenment, I automatically get an error stating that Wicd error cannot connect to dbus.  When I run ifconfig wlan0 up, my wireless light came on and I know that it is working but I still get the same error.  It also states that no error was put in the log so there is nothing for me to look at and investigate.  When I go back in and log in with KDE, Wicd comes up, asks me for my password and alas I have a good connection to my router.
Any and all suggestions will be most appreciated.
All the best,
Ian
Last edited by ichase (2011-02-17 12:56:23)

Greetings FarmerF,
I start by selecting wicd in my "internet" list of programs.  In other words, I select the icon.  In KDE wicd automatically comes up and prompts me for my password.  Would like to get that happening in E17 as well
I don't have wicd in my DAEMONS list in my /etc/rc.conf file because it autostarts in KDE.  But it might be a good idea to add it. 
I have "exec ck-launch-session start_enlightenment" in my .xinitrc file.  I just uncomment it and comment my KDE then in my DAEMONS of my rc.conf I blacklist KDE so it does not attempt to start.
I have both dbus and hal installed and both are listed in my DAEMONS
It only occurs once I manually start wicd.  As previously mentioned, when I type ifconfig wlan0 up the wifi light comes on.  Strange. 
Ian

Similar Messages

  • Why does the counter work in MAX, but not Labview?

    Please help, I have been away from Labview for over 3 months, and I am quite rusty....
    Last year, I successfully configured NI9401 to measure period (seconds) by counting the rising edges of my sensor signal.  Since then, I have aquired a new PC, and loaded all my software into it, including the Labview VI's that successfully worked on the old computer.
    I can see the digital signal using MAX and the test panel for the NI9401, so, I know my wiring and my TTL signal is OK, but, when I try to run the attached VI, nothing happens except the error below..  How do I tell this VI to look for the signal on MOD3/CTR0 and channel 14?
    Thanks. I am sure it is a small adjustment...this worked fine a few months ago...not sure what is wrong now.
    Thanks,
    Dave
    Solved!
    Go to Solution.
    Attachments:
    continuously measure period buffered_singlechannel_forum_feb_23_2012.vi ‏20 KB

    OK, now.  Resolved the issue. The vi is fine, but, some shaky wires were identified...worked in MAX but not in the vi.  Now that the connections have been tightened up, it works for both.  Sorry for the inconvenience.
    Dave

  • Works on emulators but not on mobile devices

    Hello,
    My project works on emulators but not on mobile devices (no image and on Samsung it says "unsupported file").
    Please help, I don't know what to do. My configurations: MIDP 2.1, CLDC 1.1.
    Thanks in advance.
    Edited by: Vitali.pom on Oct 27, 2011 12:01 PM

    Edit: I succeeded to solve it accidentally. I did the following: Sign the jar in Netbeans, clean and build, the jar didn't work, I wiped out the .ks from the jar and clean and build again. Now it worked.
    Edited by: Vitali.pom on Oct 30, 2011 1:28 AM

  • My sound works for music but not apps

    My sound works for music but not apps

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
    To solve some sound problems, just follow these simple steps
    1. Go to Settings
    2. Tap on General
    3. Tap on Reset
    4. Tap on Reset All Settings
     Cheers, Tom

  • Password on apple id works on iPad but not on Mac Pro

    Pass word on apple id works with iPad but not on Mac Book Pro, what is the solution, I have tried to reset password but that does not seem to solve the problem.

    It kind of depends on where you're entering the password on the MacBook Pro. iTunes Store? App Store?
    Try the password on this website https://id.apple.com/ (click on [manage my apple id]
    If it works on that website there's nothing wrong with your apple id or password. In that case we really will need to know exactly what you're trying to do when you're getting the password error.

  • Custom F4 help in a BSP application working in Mozilla but not in IE

    Hi,
    I have created a custom F4 help in a BSP application.
    It is working in Mozilla but not in IE. I tried enabling javascript as well but still it is not working.
    Can someone please suggest a possible solution for this?

    Hi,
    See simmilar discussion in thread /thread/1883519 [original link is broken]
    I think this may be helpful for you.
    Thanks,
    Chandra

  • Wifi works at home but not when away from home

    My Wifi works at home but not when away from home, what is wrong?  I thought with a phone plan I didn't need to have a wifi connection.

    You either need WiFi or Cellular (or both). If you have neither, you can't connect to the internet.
    Most people use WiFi at home and Cellular while away from home, or connect to public WiFi networks where there are some.

  • Can't FaceTime anymore?  iPad states wifi connected and iPhone 4 states not connected?  I have wireless in my home? Not sure what happened.  Password works for iPad but not on phone?

    iPhone won't connect to wifi.  iPad is connected.  Password working on iPad but not on phone.  Can't upload software update of IOS 7.1 because phone not connecting to wifi?

    Connect iPhone to computer and open iTunes.  You will be prompted to update to iOS 7.0.  Keep your phone connected until the update is finished.

  • My apple id works on itunes but not on my ipod touch, what gives ?

    my apple id works on itunes but not on my ipod touch, what gives ?

    What are you trying to do on the iPod?
    Have you went to Settings>Store and sign out and then sign back in?

  • Album Art works for most, but not all

    I was reading previous forums on the subject, but no clear answer was given..
    The album art shows up fine in itunes and my library and works for most of my music on my ipod, but how come some album's art does appear? I have it set manually and select 'Get Info' then 'Artwork' and add it from there, then drag in the finished product to my ipod. I've been doing that and it works fine for most of the albums, but every so often, the album art will not appear on my ipod. Am I doing something wrong? I take them all from the same source (amazon.com) but it makes no sense to me how some randomly don't appear.
    I tried deleting the artwork and re-adding it, but nothing happened again. If you could answer why it works for most but not all or how I can get the album art to appear for the ones it will not by re-doing something, it would be appreciated. thanks.

    I encountered the same problem in the beginning. When I compared the size of the original images, the working ones seemed to be smaller in general, so I reduced the size of all covers I intended to upload on the pod to 300x300 pixels.
    This seemed to work - for 2 days. I bought the pod on friday, had pictures on sunday, but on Monday (after the first time the pod was fully discharged) none were left left.
    So I ended searching this forum for related problems...
    And decided to join my problem to this entry.

  • How to send active links in email from firefox. Works in IE but not Firefox... Is there a setting to change?

    how to send active links in email from firefox. Works in IE but not Firefox... Is there a setting to change?
    == This happened ==
    Every time Firefox opened
    == Always

    Check with your web mail service provider for help with that issue.

  • Medical app from Intuit works in IE, but not Firefox.

    Encrypted medical app works in new IE, but not Firefox. Everything works down to the end, and click on "continue" and nothing happens. A tech and I have spent hours on this. Did not work on FF5 or 6. Did not work on old IE, but did on fresh new version with no data files copied in.

    If it works in IE but not FF, then it has nothing to do with the mp3s. More likely it's because of the HTML on the page.
    To start, page is missing DOCTYPE declaration... a MAJOR problem. The DOCTYPE declares which set of rules the browser will use to display the page. Without it, different browsers go crazy or do not work at all.
    http://www.w3schools.com/tags/tag_DOCTYPE.asp
    Validate the html code here:
    http://validator.w3.org/
    You will have to fix all the errors if you want this to work in all browsers.
    Best wishes,
    Adninjastrator

  • Flash Player works in Safari but not Internet Explorer 9

    I've installed Flash Player 10.3 and it works in Safari but not Internet Explorer 9. When I look in Manage Add-Ins I see Flash Shockwave but not Flash Player. My operating system is Windows Vista Ultimate (32bit). Safari is 5.0.5 and IE 9 is 9.0.8112.16421. I've tried uninstalling and re-installing Flash Player and uninstalling Norton 360. Nothing has worked so far. Can you help?

    Thank you for your reply. Shockwave is loaded and enabled.
    The files in flash directory are: a folder called FlashPlayerTrust: file, flash10q.ocx: file, FlashInstall.log; file, FlashUtil10q_ActiveX.dll; file, FlashUtil10q_ActiveX.exe, file, install.log.
    There is no file: NPSWF32.dll.
    When I test the browsers I get no spinning logo in either Safari or IE9. Safari says: missing plug-in, where I think the logo should be. IE-9 says nothing at the same location.
    Thanks.

  • Navigation works in IE but not Firefox or Safari!

    Hi guys
    Why do my nav links on the hompage work in IE but not in Firefox and Safari? http://www.jasonkieck.com/
    Any help would be appreciated

    The main reason is you have a <div id="bg_grid"> at the end of your html that is essentially over the top of everything else on your page, including your links. All clicks go to that <div> rather than your links undeneath it. I'm kind of surprised it works in IE to be honest.
    You do also have a ton of errors as Gramps points out, but that particular issue is not technically an error, so I have a feeling you could fix the ~100 problems shown by the validator and still have the issue.
    You could use z-index to "order the stack" as it were. Changing the z-index attributes for the css of those elements will allow you to change their order, regardless of their location in the html. A higher z-index number, the "closer" it is to the viewer (higher on the stack).
    Right now, they are both set to 1, so the one that comes later in the html is on top.
    Adding z-index:999 to the menu <div>  should do it,

  • Spry menubar works in IE, but not Firefox

    I added a very simple Spry horizontal menubar to the top of all pages in my web (I'm using DWCS4 and Spry 1.6). When I preview it in Firefox locally, it seems to work, but when it is uploaded to the web server it works in IE, but not in Firefox. Instead of a menubar, I see a stack of bulleted hyperlinks. In IE, it displays properly.
    Website is http://www.stevegoldman.com.
    How can I fix this problem so that it works with all browsers properly?
    -- Martin

    I just tested your site with firefox (latest version) and it works just fine. I also tested it in IE: 7.0 and it worked fine for that too. Looks like you have either fixed the problem or you have a different version of firefox than me or something.
    Favorite qoute: "do unto other as you would do unto yourself"
    Favorite hobby: airsoft / electric aeg airsoft guns
    Airsoft Sniper Rifles

Maybe you are looking for