[SOLVED]wifi is ''hardware disabled" any ideas?
I'm using 64 bit arch linux with gnome 3.4.
and I have gnome network manager. Wifi was working well till few days ago when I disabled it for some days. Now I can't start wifi. When I click on networkmanager icon. It shows wireless - hardware disabled and can't be switched on.
Last edited by ebshankar (2012-06-16 04:42:10)
adamrehard wrote:Provided this is a laptop, look an your keyboard and see if there's a button that turns off the wifi. It's really easy to miss.
The button F2 has the symbol of wifi (tower transmitting waves) nothing happens when I press it.
Similar Messages
-
My IPhone 4S wifi won't turn on. Wifi button is gray. I have tried restart and very briefly the wifi will work. Any ideas??
My 4s also grayed out the wifi setting a couple of weeks ago. I called technical support and the guy _insisted_that there is no known problem with phones with respect to IOS 6. He told me to reset the phone and restore and that would probably solve all my problems. Really, there is nothing wrong with the phone, he told me. I had tried just about everything else I had found on-line. The complete erase and restore did not work.
Then I went to the Genius Bar and they tried a few things (more resets) and they concluded wifi is not functioning but since it is out of warranty, they want $199 to replace it. $199 is not the cost of a new phone so obviously there is some concession here but not a complete acceptance of responsiblity. The Genius Bar told me that - in fact - that there is a known firmware problem with the phones and IOS6 that crops up randomly. Not with a lot of phones, just the unlucky few. If it is out of warranty, you have to pay. Fortunately, I had an extended warranty with my credit card so I can get reimbursed.
My next purchase is going to be an android tablet. I'm going to wean myself away from the Apple orchard. I want to expand my options for my next phone purchase. -
Hi there,
In my Yoga 2 pro, the Intel wireless-n 7260 chip is hardware disabled when using linux.
I checked it with fedora, ubuntu and suse. The output of "rfkill list" is always the same:
0: ideapad_wlan: Wireless LAN
Soft blocked: no
Hard blocked: yes
How do i unlock it?
I have a dual boot with ubuntu & win 8.1 right now.
Thanks
Michael
Solved!
Go to Solution.For others with the same problem, here's how i solved it:
There is a module called "ideapad_laptop" that prevents the wifi module to start.
A good workaround is to disable that module by blacklisting it. This worked for me with Ubuntu and Xubuntu. This guy seems to have done the same thing on fedora.
Make a new file for your personal blacklist
$ sudo nano /etc/modprobe.d/myownblacklist.conf
and add an entry for the module
blacklist ideapad_laptop
reboot and you are good to go!
To only disable the module without blacklisting it, do that:
sudo modprobe -r ideapad_laptop
Michael -
Apple ID disabled - any ideas?
About two weeks ago my wife noticed a duplicate charge on our credit crard from iTunes in the amount of 63.59. We thought it was a dup and made the mistake of have the credit card cancel the dup charge. After checking my iTunes account I realized that the charge was legit and I asked the credit card company to repost and pay the second charge which was done. At that point I noticed my Apple ID was suspended. I tried to call Apple but was lead to an email where I explained what happened. I was responded to with a series of preprogrammed emails to which I kept responding to that all they needed to do was call my credit card company ( I provided contact information) to fix the situation. I was told the reason for the Apple ID suspension had nothing to do with the purchase and that will will not contact anyone. They also will not telll me the real reason other than it is not just me but many people that are suspended. They also stated that they will not even estimate how long it will take to complete their investigation. They told me, "We ask that you endure this rather unfortunate circumstance with stead-fast resolve". Other things said include, "Michael, in order to make sure this gets looked into thoroughly, I've consulted with my senior advisor. I'd asked if it was possible to see if there was any way we could get this resolved over the phone, but I'm sorry to say I wasn't able to get approval for your request. Phone support is something that we're simply not able to offer for you.". Lastly all I was told is this.., "This is due to our increasing efforts to maximize security on the iTunes Store. Our current stage of operations dictates that we cannot comment on why we are enhancing these various security protocols; we also will not speculate on how long this security enhancement will last. "
I asked if I could go to an Apple store with photo ID etc and got the response below. I guess I became annoying as I kept asking what I could do but I cannot update anything.... Any ideas on fixing this with Apple???
From: iTunes Store <[email protected]>
Date: August 30, 2012 4:36:39 PM EDT
To:
Subject: Re: EL : (en_US) Purchases, Billing & Redemption; Follow-up: 224122824
Hey Michael,
I will not be responding to your emails any further.
Have a nice day.
Sincerely,
Shannon
Senior Advisor
iTunes Store/Mac App Store Customer Support
http://www.apple.com/support/itunes/ww/
Please note: I work Monday - Friday from 8:00 AM - 4:30 PM EST
Thank you for allowing me the opportunity to assist you.
What if I go to anApple store with photo ID??? Passport and drivers license?
All the best,
Michael Gross
(Please forgive any missed typos or unintended autocorrected spellings)
Sent from my iPad
On Aug 30, 2012, at 8:38 AM, iTunes Store <[email protected]> wrote:I just noticed that this is not an acceptable topic for this forum. my apologies...I do not wish to cause trouble.. I just wanted help..
-
Since upgrading to Lion, my MacBook Pro is super slow connecting to Wi-Fi (seems to search forever). This is not the case with my Daughter's MacBook (still on Snow Leopard) or my Wife's Dell (Windows 7). Any ideas?
Hold Option when you click on the Airport in the top bar & post the stats.
-
Any ideas what may have caused it?
Thank you again....Not having a clue what WEP is, I've done a little research. I have a BT Home Hub 3 which apparently by default uses WPA. BT have suggested I turn my hub off for 24 hours for them to monitor. However on returning home my February usage has gone back down again to it's average usage, so I think it's unlikely we'll learn a great deal. I am convinced the huge peak was caused somehow by my limited use of the ipad whilst we were abroad. I've been trying to get to the bottom of it, so that it doesn't happen again next time we go abroad.
For interest the ipad doesn't have we fi plus cellular.
The new BT Home Hub uses WPA (Wi-Fi Protected Access) encryption by default to protect the data that moves across the radio waves from it to other wireless devices. Many wireless devices sold today offer this more secure method of protection. WEP (Wireless Equivalent Privacy) is an older, less secure way of protecting such data. The BT Home Hub and BT Home Hub 1.5 both use WEP encryption by default since some older wireless devices are not compatible with stronger encryption types, such as WPA. -
[SOLVED] Yaourt Symbolic link error, any ideas?
When I try to install glusterfs via yaourt, I always run into this error:
libtool: install: warning: remember to run `libtool --finish /usr/lib/glusterfs/3.2.4/xlator/system'
Making install in glusterfsd
Making install in src
ln: failed to create symbolic link `/home/chojin/tmp/yaourt-tmp-chojin/aur-glusterfs/pkg/usr/sbin/glusterfs': No such file or directory
make[3]: *** [install-data-local] Error 1
make[3]: *** Waiting for unfinished jobs....
/bin/sh ../../libtool --mode=install /bin/install -c 'glusterfsd' '/home/chojin/tmp/yaourt-tmp-chojin/aur-glusterfs/pkg/usr/sbin/glusterfsd'
/bin/install -c .libs/glusterfsd /home/chojin/tmp/yaourt-tmp-chojin/aur-glusterfs/pkg/usr/sbin/glusterfsd
make[2]: *** [install-am] Error 2
make[1]: *** [install-recursive] Error 1
make: *** [install-recursive] Error 1
==> ERROR: A failure occurred in build().
Aborting...
==> ERROR: Makepkg was unable to build glusterfs.
==> Restart building glusterfs ? [y/N]
==> ----------------------------------
==>
This happens regardless of running yaourt as root or not, and it makes no difference if I specify a different tmp directory.
It's a really weird issue, since I was able to install it successfully on my 64bit Desktop running arch, but not on my servers. But now my desktop also fails, even though the package version hasn't changed.
Has anyone experienced this error? Perhaps with a different package, but maybe the same solution or work around would apply.
EDIT:
Weird, this time it worked.
I commented out the MAKEFLAGS in makepkg.conf and I ran makepkg directly as a user with the following flags: makepkg -L -m -s --check
I wonder what did the magic? Strange.
Update,
seems the MAKEFLAGS was the culprit. I had it set to 48 since my server has 48 cores, but I guess some packages don't like that.
Solved, I guess.
Last edited by ChojinDSL (2011-10-17 12:41:01)Yes! You are right. Now, this sounds so familiar. I vaguely remember doing this when I originally installed Arch on this laptop, but I must have done it as part of the "beginners guide" procedure. I guess this explains it:
https://wiki.archlinux.org/index.php?ti … did=168068
Now, I take it from this that I safely remove ALL the symlinks from my rc.local?
rc.local:
ln -s /dev/sr0 /dev/cdrom
ln -s /dev/sr0 /dev/cdrw
ln -s /dev/sr0 /dev/dvd
ln -s /dev/sr0 /dev/dvdrw -
Please help. Downloaded ios 8 on the iphone 4s and the wifi button is GREYED. Tried to resetting the Phone without losing data and losing data but wiyhout success. Does anybody know how get the wifi working again, please as I have a very disgruntled daughter. I believe it could be down to a battery issue, over heating? Is there a solution?
Thank You for reading and a response to sort it would be much appreciated.What was the full wording of the error message? Usually there is also a number or additional information.
Try placing the iPod in Recovery Mode and then restore
Next try DFU mode and restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
Lost my iPhone and disabled it via find my iPhone app, recently recovered the lost phone and the screen says disabled try again in 22987708 minutes! How do I re activate phone?
Force it to recovery mode and restore it using iTunes.
Use iTunes to restore your iOS device to factory settings
support.apple.com/kb/ht1414
Make sure you know your Apple ID password.
CHEERS ! -
Yoga2 13 Wifi hardware disabled
Hi there,
i bought a Lenovo Yoga2 13, it comes wirh a Intel Wireless N. It came with an OEM Windows 8.1.
At first the Wireless worked pretty good with no problems but then it would not turn on anymore.
It came after i tried to copy the partition.
Solutions i already tried since:
- enable wireless in bios
- A whole lot of drivers
- reinstall windows 8.1
- installt windows 7 (a solution was described that in windows 7 it could be activatet with the hot key, sadly the hotkey software i found on lenovo could not be installed on the yoga2)
But none worked, in windows 8.1 i can switch the "flightmode" but it switches only the bluetooth adapter. The Wireless adapter stays grey and cannot be switched.
In the device Manager it says that the networkcontroler works fine. (it is activatet)
in the network adapters it is also activatet but has a red corss.
When i use the intel software it tells me "wifi on". if i switch it to off an back to on, the message says that the Hardware Switch is diabled... wich i do not have.
The only solution i found and did not try was with linux, since i do not have linux:
https://forums.lenovo.com/t5/Idea-Windows-based-Tablets-and/Wifi-is-hardware-disabled/m-p/1307405#M1...
But my Problem seems to be the same, an hard block in the wifi controler.
Can u help me with a windows fix?
Thanks michaelI'm having the same problem. Also on the Yoga2 13.
When I run diagnostics from Intel PROSet/Wireless tools (link from the Network and Sharing Center - available after I installed latest Intel drivers), and it says that the "Hardware radio is OFF". The WLAN is enabled in BIOS. Where is this hardware switch?!
At first, the wireless card seemed to be working. It downloaded and applied several WIndows Updates. After a few reboots, I went to configure other apps and I went into BIOS to enable Legacy boot mode (to boot from USB stick to run a backup and repartition to run other OS). At some point the wireless radio got turned off (sometime during or after the windows updaters and before/after the backup, long before I actually repartitioned), and there doesn't seem to be a physical hardware switch or Fn key combination switch to turn it back on. Windows sees the Intel Wireless-N 7260 in Device Manager, but it says that WiFi is off when trying to connect to a network (it shows as off greyed out).
I did a parallel install of WIndows 8.1 with Update 1, it made no difference. I've tried different drivers (the original that shipped with the tablet, the updated one from Lenovo's site, and Intel's updated drivers) with no effect. I tried uninstalling KB 2903939, 2887595, and 2883200 (which had no effect) and then downloading on a USB key and and reinstalling them in the correct order, still no effect. -
My apple ID is verified yet when I try to upgrade Netflix which asks for password a box pops up saying
My apple ID has been disabled.Any ideas?Contact Apple:
http://www.apple.com/support/appleid/contact/ -
Scrollbar problem - any ideas?
I know another scrollbar problem...ive read the posts but cant solve it. Anyone got any ideas?
got a program called Map which draws a map (using paint()) of a web site. I can get it to work but often there are so many links they go off the page.I need a scrollbar.
In main i set up a frame: JFrame frame=new JFrame("M");
Then set up scrollbar: JScrollPane cf = new JScrollPane();
cf.setHorizontalScrollBarPolicy (JScrollPane.HORIZONTAL_SCROLLBAR_ALWAYS );
cf.setVerticalScrollBarPolicy(JScrollPane.VERTICAL_SCROLLBAR_ALWAYS );
Then add scrollbar to frame: frame.getContentPane().add(cf);
Then add Map() - my main prog: cf.add(new Map());
(Map constructor calls repaint() - paint method draws to screen. main program extends JComponent)
All i get is a blank (grey frame) with a scrollbar :) ...doesnt show Map - paint
I can ignore scrollbar and use a container instead -
Container c=frame.getContentPane()
then set its layout : c.setLayout(new BorderLayout());
and add Map() to it : add(new Mapper(),BorderLayout.CENTER);
It works fine - but i need a scrollbar...
Thanks for your time&helpHers the code for my main Mapper program (which is loaded first) and the Scan program(below).I know the structures all over the place+thats the problem. I would like a scrollbar. Also everytime i scan a new window opens, it would be good if only 1 ever opened.Ive been fiddling for days and am lost.Can anyone sort it out? I think the codes ok, just needs restructuring...
The main Mapper program :
package project.e;
import javax.swing.*;import java.awt.*;import java.awt.geom.*;import java.awt.event.*;
import java.io.*;import java.net.*;import java.lang.Math.*;import java.util.*;
public class Mapper extends JComponent{
static int w = 1000;
static int h = 1000;
static String [] Lnks = new String [5000]; //Lnks
public Mapper()
{ repaint();}
public void paint(Graphics g){
Graphics2D g2D=(Graphics2D)g;
Toolkit tk = Toolkit.getDefaultToolkit();
Image img = tk.getImage("c:/windows/desktop/project/e/wirecube.gif"); //setup images
Image rimg = tk.getImage("c:/windows/desktop/project/e/bwirecube.gif");
int ww=(w/2);int hh=(h/2);
g2D.setFont(new Font("Times New Roman", Font.PLAIN,12));
g2D.setPaint(Color.cyan);
g2D.drawString("Web Page Scanned : ",10,50); g2D.drawString(Scan.url,120,50);
g2D.drawString("Total Links Found : ",10,100); g2D.drawString(String.valueOf(Scan.x),120,100);
g2D.drawImage(rimg,ww-88,50,this); g2D.setFont(new Font("Times New Roman", Font.PLAIN,12));
g2D.setPaint(Color.green);
g2D.drawString(Scan.url,ww-88,50);
int a=w/5;
int up=0;
int lx=0;
g2D.translate(ww,hh);
g2D.translate((-ww-a)+10,-300);
for (int i=0;i<(Scan.x);i++){ //loop - drawing all (5 per line)
if (lx==5){g2D.translate((-ww-ww),100);lx=0;} //every 5 times
g2D.translate(a,0);
g2D.drawImage(img,0,0,this); //img
g2D.setFont(new Font("Times New Roman", Font.PLAIN,12));
g2D.setPaint(Color.green);
g2D.drawString(Lnks[up],ww-ww,hh-hh-10); //URL
if (Scan.tl==true){g2D.drawString(Scan.IorE[up],ww-ww,hh-hh-25);}lx=lx+1;up=up+1;}}
public static void main(final String [] args){
System.arraycopy(Scan.Links,0,Lnks,0,Scan.x);
JFrame frame=new JFrame("Mapper"); //frame setup
JMenu menu = new JMenu("Menu");
JMenuItem scan = new JMenuItem("Scan");
scan.setMnemonic(KeyEvent.VK_S);
scan.setAccelerator(KeyStroke.getKeyStroke(KeyEvent.VK_S,Event.CTRL_MASK));
scan.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent e){Scan.main(args);}});
//call Scan
JMenuItem downloadLink = new JMenuItem("download-Link");
downloadLink.setMnemonic(KeyEvent.VK_L);
downloadLink.setAccelerator(KeyStroke.getKeyStroke(KeyEvent.VK_L,Event.CTRL_MASK));
downloadLink.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent e){GetLink.main(args);}});
JMenuItem downloadImage = new JMenuItem("download-Image");
downloadImage.setMnemonic(KeyEvent.VK_I);
downloadImage.setAccelerator(KeyStroke.getKeyStroke(KeyEvent.VK_I,Event.CTRL_MASK));
downloadImage.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent e){GetImage.main(args);}});
JMenuItem Quit = new JMenuItem("Quit");
Quit.setMnemonic(KeyEvent.VK_Q);
Quit.setAccelerator(KeyStroke.getKeyStroke(KeyEvent.VK_Q,Event.CTRL_MASK));
Quit.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent e){System.exit(0);}});
JMenuBar menuBar = new JMenuBar();
menu.add(scan);
menu.add(downloadLink);
menu.add(downloadImage);
menu.add(Quit);
menuBar.add(menu);
frame.setJMenuBar(menuBar);
Container c = frame.getContentPane();
c.setLayout(new BorderLayout());
c.add(new Mapper());
c.setBackground(new Color(0,0,0));
frame.setJMenuBar(menuBar);
frame.setBounds(0,0,w,h);
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.setVisible(true);}}
Scan :
package project.e;
import java.awt.*;import java.awt.geom.*;import java.awt.event.*;import javax.swing.*;import javax.swing.text.*;import javax.swing.text.html.*;import java.io.*;import java.net.*;
public class Scan{
static String [] Links = new String[5000]; //array of links
static String [] IorE = new String[5000]; //array - Internal or External
static int x = 0; //length
static String url = new String(); //url
static String type = new String(); //link/image
static boolean tl;
static String l = new String("links");
static String i = new String("images");
public static void main(String [] args){
Links = new String[5000]; //need to repeat ini. for rescanning
IorE = new String[5000];
x = 0;
url = new String();
type = new String();
EditorKit kit = new HTMLEditorKit();
Document doc = kit.createDefaultDocument();
doc.putProperty("IgnoreCharsetDirective",Boolean.TRUE);
try{
type = JOptionPane.showInputDialog(null,"Please enter file type to scan for - links / images ");
url = JOptionPane.showInputDialog(null,"Please enter URL"); //get url (var.) to map - dialog box
Reader rd = getReader(url); // Create a reader on the HTML content
kit.read(rd, doc, 0); // Parse the HTML.
ElementIterator it = new ElementIterator(doc);
javax.swing.text.Element elem;
while ((elem = it.next()) != null){
if (type.equals(l))
tl =true;
//int bol = url.indexOf(".com");
SimpleAttributeSet s = (SimpleAttributeSet)
elem.getAttributes().getAttribute(HTML.Tag.A);
if (s != null)
Links[x]=String.valueOf((s.getAttribute(HTML.Attribute.HREF)));
String tmp = Links[x].substring(0,1);
if (! tmp.equals("h")){
if (! tmp.equals("/"))
{Links[x]="/"+Links[x];}} //if string doesnt start with h or / //then add a / to start
if (Links[x].startsWith("/")){System.out.println("Internal Link");IorE[x]="Internal Link";} //if starts with / then internal
else{
if (Links[x].startsWith(url)){System.out.println("Internal Link");IorE[x]="Internal Link";} //else if starts with url then internal
else{
String tmp3 = url.substring(11); //else if contains url - (http://www.) eg. 123.ibm.com then internal
int b=0;
b=Links[x].indexOf(tmp3);
if (b>0){System.out.println("Internal Link");IorE[x]=("Internal Link");}
else{System.out.println("External Link");IorE[x]=("External Link");}}} //else must be external (doesnt start with / or url or contain middle bit of url)
System.out.print("Link : ");
System.out.print(x);
System.out.println();
System.out.println(Links[x]);
System.out.println();
x=x+1;
if (type.equals(i))
tl=false;
if ( elem.getName().equals( HTML.Tag.IMG.toString() ) ){
Links[x] = String.valueOf(elem.getAttributes().getAttribute( HTML.Attribute.SRC ));
System.out.print("Image : ");
System.out.print(x);
System.out.println();
System.out.println(Links[x]);
System.out.println();
x=x+1;}
Mapper.main(args);
}catch(Exception e){e.printStackTrace();}
static Reader getReader(String u) throws IOException{
if (u.startsWith("http:")){
// Retrieve from Internet
URLConnection con = new URL(u).openConnection();
return new InputStreamReader(con.getInputStream());}else{
// Retrieve from file.
return new FileReader(u);
Also got 2 extra - GetImage & GetLinks...they just go away and do there own stuff...no painting required so cool.The probelms is between Mapper+Scan...
Thanks for your time&help
Oly -
Hi, I loaded an iTunes card and bought an audiobook a few weeks back! I was unable to download it because my wifi was down, my wifi has just been fixed but now my audiobook purchase is not available but the cash has been taken? Any ideas how to solve this
When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive. It would be a few months old so it wouldn't have the complete library on it....any ideas? I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.
-
I have Iphone 3G, it is disabled bec kids can't remeber the password. trying to enable thru Itunes but phone won't connect to wifi. it says no service. have also tried to erase/restore the phone thru icloud, but with no internet, it can't be found.
any ideas on how i can restore this phone and reset it??You cannot go back
Basic Troubleshooting
Reset
Restore with back up
Restore as new
After updating did you reset the iPhone ,if not it is like not rebooting after an update to a PC -
It seems my Wifi on/off button has become disabled on my IPhone 4S. Any ideas as to how to enable it to turn on?
I been having the same problem with my iPhone 4S my iPhone its upgraded to the new version and my wifi does not want to turn on its dim gray I tried reseting it and pressing the home and the power button i have resset my network setting but its no help I don't know what else to do?
Maybe you are looking for
-
Hello all Gurus, I have a problem with the PO output form. We have created new output types and tested them in quality environment and found that the PO is generating the correct output. Then we moved these output types to production environment and
-
Check box validation using Javascript
Hi Everyone, I am using LiveCycle with my form that have multiple sections in the form that have questions that have a check box yes or check box no next to it. The user can either choose yes or no. Note: I am not using radio buttons. I am lookin
-
Hi forum, I downloaded the XI Content from the Service Marketplace for SRM SERVER 7.0. I noticed that the Namespace http://sap.com/xi/ABA is missing in the SWCV SRM SERVER 7.0. Should I download again? My XI is 7.1 with Sevrice Pack 11. However when
-
If i have safari os x 10.6.8 on my imac 27" and want to back up to icloud should i upgrade to os x lion? is there a reason not to do this on my mac?
-
Hi How can get Color Effect Styles for Movie clips using AS3? How can remove tint for movieclip in AS3? Thanks Regards Balasubramaniyan.S