[SOLVED] WINE has no more support for xinput?

Short version: WINE programs no longer have pressure sensitivity. Tablet works fine in non-WINE programs like GIMP.
I hope this falls under multimedia because my Windows graphics programs (Artrage, Photoshop) don't have pressure sensitivity any more. I've checked with GIMP and Xournal, xinput works fine there, though they are drastically less sensitive than their Windows counterparts (unfortunately). Unless there's a patch that makes GIMP understand more than 256 levels of pressure, I think I'll stick to photoshop.
Anyway, I was wondering if anyone out there is experiencing the same thing (I'm using a Wacom Tablet, though I do have that newish 12WX cintiq). I definitely was using Photoshop and Artrage through WINE perfectly before, pressure sensitivity and even tilt was great.
But now, I have no idea what happened. Is there something wrong with the WINE configuration, you think? Or is it my best bet just to downgrade WINE or update the linuxwacom drivers (to the beta)?
Thanks in advance,
feminaexlux
PS. WINE is 1.1.5, Linuxwacom is 8.0.3
Last edited by feminaexlux (2008-09-27 22:30:00)

Guess it was a wine bug. Compiled Wine 1.1.4 from source, and things are now working as they should.
I hate regression!

Similar Messages

The partner transaction manager has disabled its support for remote/network transactions....When inserting during trigger in linked server

Hi All,
I am getting below error while inserting into Linked Server (sql2012) thru trigger from sql2008 ....However if i insert the same thru Store Procedure it is inserting successfully....MSDTC service is started on both sql server machines....also both machines
rebooted....but still i am facing this error.
OLE DB provider "SQLNCLI" for linked server "XXX.XXX.XXX.XX" returned message "The partner transaction manager has disabled its support for remote/network transactions.".
Msg 7391, Level 16, State 2, Procedure ins_test, Line 11
The operation could not be performed because OLE DB provider "SQLNCLI" for linked server "XXX.XXX.XXX.XX" was unable to begin a distributed transaction.
Could assist to resolve.
Regards
Shehzad

Hi SHzKhan,
According to your error message, we need to verify if you configure the MSDTC correctly, When you have more than one SQL Server involved in a Distributed Transaction, you need to make some changes to the default configuration of MSDTC for these distributed
transactions to succeed. There is a detail about recommending MSDTC settings for using Distributed Transactions in SQL Server, you can review the following article.
http://support.microsoft.com/kb/2027550/en-us
There is a similar issue about error 7391, you can refer to the following link.
http://dba.stackexchange.com/questions/30235/msg-7391-distributed-transactions-dtc-on-sql-server
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

"Your Mac OS X Startup Disk Has No More Space For Application Memory"

I've been having a problem in the last few days with my Mac. I would be surfing the net, or doing whatever, and an error message would randomly pop up on my screen. It would say: "_Your Mac OS X Startup Disk Has No More Space For Application Memory_". Then the dialog box would give me the option to PAUSE or *Force Quit* applications. But instead of letting me click these buttons, my Mac would just automatically freeze after the dialog box popped up!
The odd thing is, is that I truly was NOT using that much memory...much less than I usually do. Plus I have 4 GB of RAM, and I know I wasn't maxing it out.
Does anyone know why this error message would be popping up like this (especially since there was no way that I was using all my Application Memory)? And does anyone know why my Mac just freezes instantly when the error message pops up?
Any help would be GREATLY appreciated! It's quite hard use my Mac right now, since I never know when it's gonna freeze up on me!
Thanks!

I assume that means no backups? That's a problem you need to fix next.
You might be able to start your Mac in "Target Disk Mode" while connected to the other Mac. You do this by holding down the "T" key while booting. And I was wrong: you must use Firewire, not USB.
The other Mac will see your HD as an external F/W drive. You may have to "mount" it via Disk Utility, if it doesn't show up on the desktop and/or Finder sidebar.
You probably need to do a lot of examining what's not needed, and perhaps some maintenance, but you don't want to do that under pressure.
To get it running and buy just a bit of time, your best bet is to copy some big stuff (like video) either to the other Mac's hard drive or to one or more DVDs, then delete it from your HD.
Once you get several GB free, you should be able to boot it. Then get started cleaning it up. There are many threads in this forum with links and suggestions for how to do this. Just search for +Disk Full.+
Did this happen all of a sudden? If so, it's possible you had some sort of runaway or continually failing process, filling up some logs and/or caches. If you don't do routine maintenance, either by clearing your browser cache, etc., manually, or via an app like OnyX, that's another thing you might want to investigate.

Startup disk has no more space for application memory - itunes using 19GBytes!

I am having intermittent but recurring issues with the dialog "Your Mac OS X startup disk has no more space for application memory" and iTunes is listed as not responding. Activity Monitorsays iTunes consuming on various instances 16 and 19GBytes etc.
Any ideas??
System is a ~ 6month old 27" late 2012 iMac with OS X 10.8.4 32 GBytes RAM and 3TB disk with 2TB free. App Store says no updates.

Read this whole message before doing anything.
Back up all data.
Quit iTunes if it’s running.
Step 1
Hold down the option key and select
Go ▹ Library
from the Finder menu bar. Move the following items from the Library folder to the Trash, if they exist:
Caches/com.apple.iTunes
Caches/QCCompositionRepository-com.apple.iTunes.cache
Saved Application State/com.apple.iTunes.savedState
Leave the Library folder open. Try iTunes again. If it works now, stop here. Close the Library folder.
Step 2
If you still have problems, quit iTunes again. Go back to the Finder and move the following item from the open Library folder to the Desktop:
iTunes
Note: you are not moving the iTunes application. You’re moving a folder named “iTunes.”
Test. If iTunes now works, delete the iTunes folder on the Desktop. Otherwise, quit iTunes again. Put back the folder you moved, overwriting the newer one that may have been created in its place, and continue.
Step 3
In the Preferences subfolder, there may be several files having names that begin with either of the following strings:
com.apple.iTunes
com.apple.mobile.iTunes
Move them all to the Desktop.
Also in the Preferences folder, there's a subfolder named "ByHost". Open it and do the same thing.
Test again. This time iTunes should perform normally, but your settings will be lost. You may be able to put back some of the files you moved to the Desktop in this step. Relaunch and test after each one. Eventually you should find one or more that causes iTunes to malfunction. Delete those files and recreate whatever settings they contained.
If the issue is still not resolved, quit iTunes again and put all the items you moved to the Desktop back where they were. You don’t need to replace the items you moved to the Trash. Stop here and post again.
If you later decide that you don’t like the results of steps 2 and 3, you can undo them completely by quitting iTunes and restoring the items you deleted in those steps from your backup.

Where is the Sony XZ1S C6916 support page?!?! Has Sony stopped support for this device?

Hello community,
Im new to sony community so please take it easy on me. I was able to access support information from sonys own xperia z1s support page. But as of last night, that page is no longer existent and any searches for C6916 redirect me to the Z1 support page with no information on Z1S. Has sony stopped supporting this device?

I wouldn't like to say as the Z1s is a T-mobile specific locked phone and may have security features in place to only allow network signals via their firmware
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

[SOLVED]ModemManager 0.7 breaks support for Ericsson F3607gw WWAN card

Hello,
apparently the ModemManager v 0.7.990 currently in the repos no longer supports my WWAN card, a Dell 5540 Mobile Broadband (which is just a rebranded Ericsson F3607gw).
ModemManager 0.6, which is the version used in Fedora 18, works just fine with the card and connections can be made.
My device, as listed by lsusb:
Bus 008 Device 004: ID 413c:8184 Dell Computer Corp. F3607gw v2 Mobile Broadband Module
The output of the log with MM 0.7:
Apr 25 00:43:18 brb-laptop ModemManager[1823]: <info> ModemManager (version 0.7.990) starting...
Apr 25 00:43:18 brb-laptop systemd[1]: Started Modem Manager.
Apr 25 00:43:18 brb-laptop sudo[1820]: pam_unix(sudo:session): session closed for user root
Apr 25 00:43:20 brb-laptop ModemManager[1823]: <warn> Couldn't find support for device at '/sys/devices/pci0000:00/0000:00:19.0': not supported by any plugin
Apr 25 00:43:20 brb-laptop ModemManager[1823]: <warn> Couldn't find support for device at '/sys/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0': not suppo...ny plugin
Apr 25 00:43:22 brb-laptop ModemManager[1823]: <info> Creating modem with plugin 'Generic' and '4' ports
Apr 25 00:43:22 brb-laptop ModemManager[1823]: <info> Modem for device at '/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-6' successfully created
Apr 25 00:43:23 brb-laptop ModemManager[1823]: <warn> couldn't load Operator name: 'Could not parse the CRSM response'
Apr 25 00:43:23 brb-laptop ModemManager[1823]: <info> Modem: state changed (unknown -> disabled)
Any connection attempt with NM fails with the log entry "cannot find valid data port".
When downgrading to MM 0.6, the output is:
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Loaded plugin 'MotoC'
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Loaded plugin 'Gobi'
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Loaded plugin 'Huawei'
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Loaded plugin 'Option High-Speed'
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Loaded plugin 'Option'
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Loaded plugin 'Sierra'
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Loaded plugin 'Novatel'
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Loaded plugin 'Nokia'
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Loaded plugin 'ZTE'
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Loaded plugin 'Ericsson MBM'
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Loaded plugin 'Longcheer'
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Loaded plugin 'AnyData'
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Loaded plugin 'SimTech'
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Loaded plugin 'X22X'
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Loaded plugin 'Linktop'
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Loaded plugin 'Samsung'
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Loaded plugin 'Wavecom'
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Loaded plugin 'Cinterion'
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Loaded plugin 'Iridium'
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Loaded plugin 'Generic'
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Successfully loaded 20 plugins
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> (ttyACM0) opening serial port...
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> (ttyACM1) opening serial port...
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> (ttyACM2) opening serial port...
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> (Ericsson MBM): GSM modem /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-6 claimed port wwp0s29f7u6i6
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> (ttyACM0) closing serial port...
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> (ttyACM0) serial port closed
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> (Ericsson MBM): GSM modem /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-6 claimed port ttyACM0
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> (ttyACM1) closing serial port...
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> (ttyACM1) serial port closed
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> (Ericsson MBM): GSM modem /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-6 claimed port ttyACM1
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> (ttyACM2) closing serial port...
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> (ttyACM2) serial port closed
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> (Ericsson MBM): GSM modem /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-6 claimed port ttyACM2
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> (ttyACM0) opening serial port...
Apr 25 00:40:53 brb-laptop NetworkManager[219]: <info> (wwp0s29f7u6i6): new GSM/UMTS device (driver: 'cdc_ether' ifindex: 2)
Apr 25 00:40:53 brb-laptop NetworkManager[219]: <info> (wwp0s29f7u6i6): exported as /org/freedesktop/NetworkManager/Devices/4
Apr 25 00:40:53 brb-laptop NetworkManager[219]: <info> (wwp0s29f7u6i6): now managed
Apr 25 00:40:53 brb-laptop NetworkManager[219]: <info> (wwp0s29f7u6i6): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Apr 25 00:40:53 brb-laptop NetworkManager[219]: <info> (wwp0s29f7u6i6): bringing up device.
Apr 25 00:40:53 brb-laptop NetworkManager[219]: <info> (wwp0s29f7u6i6): deactivating device (reason 'managed') [2]
Apr 25 00:40:53 brb-laptop NetworkManager[219]: <info> (wwp0s29f7u6i6): device state change: unavailable -> disconnected (reason 'none') [20 30 0]
Apr 25 00:40:53 brb-laptop kernel: IPv6: ADDRCONF(NETDEV_UP): wwp0s29f7u6i6: link is not ready
Apr 25 00:40:53 brb-laptop modem-manager[1522]: <info> (ttyACM0) closing serial port...
Apr 25 00:40:53 brb-laptop modem-manager[1522]: <info> (ttyACM0) serial port closed
However, I cannot downgrade to MM 0.6 as Gnome 3.8 and NetworkManager require >=0.7.
Has anyone encountered this problem before and has a fix/solution? Or should I file a bug in the Arch tracker? I got Bluetooth PANs to work with a patched bluez from this board, as the upstream version is behind the one used by fedora (4.101-1 vs. 4.101-4). WWAN is the only thing that doesn't work with my new Arch setup.
Thanks in advance, any help would be much appreciated.
Last edited by grinko (2013-04-29 21:10:07)

I did, you linked to it already
I slightly modified modemmanager-git in the AUR and added some dependencies, the git version now works for me.

No more support for Tangent CP200 panels?

Have Adobe decide to drop support for Tangent CP200 panels?
The IP address configuration is no longer if preferences
Why?
Speedgrade was my only hope!
Will I have to learn and buy Scratch then?

The mappings are still there. I am looking at the tangent .xml file right now in speed grade, and it clearly says CP-200. The tangent.xml is a hidden file with in speedgrrade. Here is a section from that file.





Kevin

Has Adobe ended support for Photoshop CS5

I use Secunia PSI to monitor my software for updates. Right around the time CS6 shipped, PSI started reporting all of my CS5 applications as "end of life" meaning no more patches will be released.
Is it correct that CS5 is no longer supported with patches?
CS5 to CS6 seems like an upgrade of just one version, but maybe Adobe considered CS5.5 to be a full version upgrade?

Generally speaking, Adobe always stops releasing point revisions of their software the minute a new major version is released.
Version 12.anything is considered CS5, and the 12.0.4 patch for Photoshop CS5 brought it up to be functionaly equivalent of Photoshop CS5.5 (save for cloud licensing).
That said, there's a 12.0.5 that's "half released" to address some concerns over a vulnerability when opening TIFF files that was brought to light around the time of the Ps CS6 release. It's not clear whether 12.0.5 is ever going to be released through the mainstream software update process.
Out of curiosity, why do you use a 3rd party update monitoring package? Adobe has one of its own.
-Noel

More support for Designer PDFs on Mobile

Looking at the number of posts here, it is clear that LiveCycle Designer is a very popular application, though I am not sure whether Adobe senior management are aware of this fact.
Hardly surprising - little in the way of competition, and Adobe's own offerings - Acrobat XI and FormsCentral - just don't offer the same combination of ease of use and powerful form design features.
It is also clear that many, many people who are using LiveCycle Designer are not using it in connection with the LiveCycle server products - so cannot choose to render the form as Flash/HTML5 - they have to rely on the PDF format.
Why then is it so difficult for Adobe to produce a Reader on Mobile that supports Designer PDF forms? - as far as I can see, even if I save an ES3 form as a Static PDF, users are unable to complete it using the latest Adobe Reader on Android.
I'd actually say that non-server linked use of LiveCycle Designer has increased in the last couple of years - but this is not going to continue if there is no way to - easily - get the form usable in Adobe Reader on Mobile.
I don't think that Adobe realise that by seeding technology like this at the 'cubicle dweller' level (i.e. available to an individual geek/bright spark even if the company has not bought into the server technology) actually does often lead to the company making that 'big purchase'. In short, middle managers get to see some of the great work that Mike/Martha has been doing in his/her cubicle, and slowly but surely news of the efficiencies progress up the food chain until someone is convinced enough to sign off the big server purchase.
From past experience, Adobe have shown that they don't understand this way of marketing their technology - they seem to rely on glossy ads aimed at C level execs, ridiculously high entry-level prices and making these prices hard to even get hold of. Well, if that was such a bright idea, why have they made such slow progress with (and even scaled back) LiveCycle.
Some of the LiveCycle tech is really great - e.g. LC Rights Management and Barcoded Forms - and they should have gotten far more penetration out there. If Adobe want LiveCycle to thrive, they need to change their ways.
And if anyone has a solution for Designer PDF forms on mobile (even static ones), please share. Thanks

Looking at the number of posts here, it is clear that LiveCycle Designer is a very popular application, though I am not sure whether Adobe senior management are aware of this fact.
Hardly surprising - little in the way of competition, and Adobe's own offerings - Acrobat XI and FormsCentral - just don't offer the same combination of ease of use and powerful form design features.
It is also clear that many, many people who are using LiveCycle Designer are not using it in connection with the LiveCycle server products - so cannot choose to render the form as Flash/HTML5 - they have to rely on the PDF format.
Why then is it so difficult for Adobe to produce a Reader on Mobile that supports Designer PDF forms? - as far as I can see, even if I save an ES3 form as a Static PDF, users are unable to complete it using the latest Adobe Reader on Android.
I'd actually say that non-server linked use of LiveCycle Designer has increased in the last couple of years - but this is not going to continue if there is no way to - easily - get the form usable in Adobe Reader on Mobile.
I don't think that Adobe realise that by seeding technology like this at the 'cubicle dweller' level (i.e. available to an individual geek/bright spark even if the company has not bought into the server technology) actually does often lead to the company making that 'big purchase'. In short, middle managers get to see some of the great work that Mike/Martha has been doing in his/her cubicle, and slowly but surely news of the efficiencies progress up the food chain until someone is convinced enough to sign off the big server purchase.
From past experience, Adobe have shown that they don't understand this way of marketing their technology - they seem to rely on glossy ads aimed at C level execs, ridiculously high entry-level prices and making these prices hard to even get hold of. Well, if that was such a bright idea, why have they made such slow progress with (and even scaled back) LiveCycle.
Some of the LiveCycle tech is really great - e.g. LC Rights Management and Barcoded Forms - and they should have gotten far more penetration out there. If Adobe want LiveCycle to thrive, they need to change their ways.
And if anyone has a solution for Designer PDF forms on mobile (even static ones), please share. Thanks

Please more support for the IPTC Headline tag!

The use of the IPTC Headline tag (as opposed to the Title tag) is being discussed in posts back to 2007.
Basically it's weird that Lightroom supports the Title tag with filters and search function whereas the Headline tag sees none of that treatment.
Per definition the Headline tag
"... is a brief, publishable synopsis or summary of the contents of the photograph. Like a news story's lead, the Headline should grab attention and summarize the image's content. Headlines must be succinct. Leave any supporting narrative for the Description field. Do not, however, confuse the Headline term with Title."
whereas the Title tag
"... can include a shorthand reference for the image or “photograph” - primarily for identification. The title of an image should be a short, human-readable name - text and/or numeric reference - and may take several forms. For photographers, this might be the filename of their original scan or digital camera file. For news organizations it might be the name of a story it accompanies. The Title term should not be confused with the Headline term, which is a short synopsis of the photograph's content."
These definitions should make it fairly clear that the Headline tag needs at least the same tools treatment as the Title tag has.

Submit a feature request to:
http://feedback.photoshop.com/

I can't believe that there is no more support for parts any mor

i can understand that software support need hardware ability. but spare parts? what on earth . i have 2 desk tops need power supply 2006 and 2008 and its look like apple stopped the spare parts for both of them . ok some of will wonder saing its tool old mac . my answer to them why we buy apple stuf ? because its last longer than the others. but what defrint its make if there is no more parts to last that long

So you took it to an Apple store or AASP and they told you they could not get parts for it?
-> https://www.ifixit.com/Store/Mac
-> http://www.macpartsonline.com/

When resuming from standby in OSX, firefox has no gesture support for scrolling, tapping to click or three finger flick back and forth in Snow Leopard

This occurs in 10.6.8 Snow Leopard when resuming usage after the computer was in standby (closing the lid).
I never experienced this with firefox 6. The problem arose with 7 and continues with 8.

I'd like to chime in and add that there is currently no acceptable Font Management solution for OSX.
Sorry, but it's true.
Me, and every professional designer / ad agency / design firm I know struggles with this every day. In fact, most of them have resorted to the 'ol "temporarily drag said fonts into ~users/library/fonts, and then out again when you're done".
That's no way to work.
I've tried them all. And I know people who've tried them all. Font Book, Suitcase2, Font Explorer X, FontAgentPro, etc, etc. And they ALL have major problems. Especially when you have more than a few hundred fonts. Which most designers easily do.
We need a robust, stable, AUTO-ACTIVATING solution ala ATM in os9... I'm not a programmer, but I gotta ask: why is this so hard?
I've used Font Dr to check and re-check ALL my fonts. Most of which are bought-and-paid-for professional versions. I keep a bare minimum of fonts activated at startup. I've read all the "How Fonts Work in OSX" articles, and I know what the heck I'm doing! But my font life on Panther, Tiger, Leopard and now Snow Leopard has been a living ****.
YES the Helvetica disaster is a huge problem. But I think the issue is much, much larger.
I spend literally HOURS of billable time each week dealing with this nightmare. When it comes time to design something, and find "the perfect font" for a headline, or a logo –which is something that used to fill me with glee– I'm consumed by dread. Having to yet again wade through this depressing morass of stupidity.
Sorry for the rant. But this issue is literally EVERYWHERE on forums and message boards, but NOWHERE in MacWorld, ArsTechnica, CNET, etc, etc. AKA the kinds of pubs that could actually hold Apple's and the other companies feet to the fire on this issue.
Something MUST be done.
Darnit!

Belkin has no Leopard support for its UPS

For those who are contemplating a Belkin UPS as protection for their iMacs, I purchased the F6C900-UNV after being told by the Belkin support personnel that it supports all MAC operating systems. After the purchase, and seemingly strange behavior by the unit, I spoke to several representatives of Belkin only to find out that NO, it does not support Leopard OS. Looking at their website, they support only earlier versions of the MAC OS. They have said that they will have the support sometime in the future, but could not give any answer as to an estimated date.

Thanks for everyones help. I just spent about an hour with the AppleCare tech going through many scenarios with this.
1) I deleted all of the software and just plugged in the UPS. The UPS tab did not show up in the Energy Saver. But more important, opening the Apple menu/About This Mac/More info.... and clicking on the Power option, it showed: "UPS Installed: No".
2) The same thing as above occurred when I installed the UPS software. With the software installed, I could activate the "Agent" portion of the software program and the Monitor showed that the UPS was installed with the appropriate Load and everything looked as though it should when there is a connection between the Mac and the UPS.
The Apple tech felt that the UPS with the Belkin software installed showed that the UPS was connected to the UPS. He said that the Mac may not be recognizing this particular UPS model since the upgrade for Leopard OS is not available yet from Belkin. This may be the reason that they feel the need to upgrade to another version. He did not feel that there was anything intrinsically wrong with the UPS hardware. Based on my recent contacts with Belkin, they would probably not accept a return based on the fact that it will still protect the Mac, but without the Automatic Power Software Management until their upgrade for Leopard is available.
I was wondering if there is any other suggestion that anyone might have as to any type of configuration or any overlooked condition that I might try on the Mac to bring back the ability to see the UPS in the Energy Saver?
I would feel more comfortable if the UPS was recognized by the MAC so that any configuration would assure me of correct output information.
Message was edited by: Herschel Hochman

HP 15-r022tx Notebook PC has no drivers support for windows?

I am thinking of buying a HP 15-r022tx laptop from flipkart and it comes with free dos installed on it. But I want to install windows 7 on it and have the disc for it. But I will not be having any drivers and so I searched the drivers and downloads on HP support website but on it, the search could not find my laptop. But the laptop showed up when searched on the main site.. Only the support site had nothing for it. What do I do now? I want to buy this laptop but how do I acquire drivers for windows u 64 bit? Please help.
This question was solved.
View Solution.

Aniruddha96 wrote:
I am thinking of buying a HP 15-r022tx laptop from flipkart and it comes with free dos installed on it. But I want to install windows 7 on it and have the disc for it. But I will not be having any drivers and so I searched the drivers and downloads on HP support website but on it, the search could not find my laptop. But the laptop showed up when searched on the main site.. Only the support site had nothing for it. What do I do now? I want to buy this laptop but how do I acquire drivers for windows u 64 bit? Please help.
Hi Aniruddha96
Check this thread for details regarding driver downloads. Wait till Subash post the outcome of the install. I have tried maximum to resolve the concern related. Have to probably wait for the outcome so.
Thanks
Visruth
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Lumia 920 has no more Support??

Hello guys, (I don't know if this is the right forum but anyway

hi mate,
games that run on 1GB of RAM do receive the game, its just that it does take a few days for it to roll out to all the regions. this has known to happen before, such as UK first then India getting it next etc etc yada yada.
as for support of the handset, Nokia/Microsoft has promised that all existing WP8 handsets will receive the update to Windows Phone 8.1 w/Lumia Cyan. considering that the 920 is coming up on two years since its launch, that's freaking fantastic. the phone still rocks great hardware and a great camera, so you shouldn't worry about a thing.

[SOLVED] WINE has no more support for xinput?

Similar Messages

Maybe you are looking for