[Solved with the obvious]pacman is broken
For mothers day one of my 2 gig sticks of ram broke. After I removed the offending hardware, my file system was corrupted. I ran fsck and said yes one hundred times until it was repaired. Everything is appears to be running well except for pacman. Here is my code when I try to upgrade the system:
[cdom@betty ~]$ sudo pacman -Syu
Password:
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
:: Starting full system upgrade...
error: could not open file /var/lib/pacman/sync/core/cryptsetup-1.0.6-2/desc: No such file or directory
error: could not open file /var/lib/pacman/sync/extra/foomatic-filters-4.0_20090424-1/desc:No such file or directory
^C
Interrupt signal received
[cdom@betty ~]$
This is a brand new installation of arch_64 on my Lenovo X61. I am wondering if this is relatively easy to fix or should I just reinstall.
Last edited by cdom (2009-05-11 22:09:24)
Have you tried running pacman -Syy?
Similar Messages
-
How to run group solve with the batch manager
I'd like to know if it is possible (and how) to run group solve defined in OFA with the batch manager.
Thank you
Luigi Polverini
Synesis s.r.l.OFA uses its Task Processor rather than Batch Manager to run tasks in batch. Group solves can be scheduled this way by submitting the group solve task to the TP, and then rescheduling it in the Task Queue window.
null -
All versions of Firefox with the Australis UI is broken for me.
Hey, I've been having a problem with post-v28 Firefox. The Hamburger/3-Line button does not open for me in the Australis UI, and the about:customizing page does not open. It's just a blank page. Also, I think the newer Firefox has some problems with Session Manager, but I've been concentrating on the non-functioning vanilla stuff.
I've tried Uninstalling and Reinstalling, Safe Mode, Uninstalling with Revo Uninstaller, Manually deleting profile and program files, and trying non-Mozilla Firefox builds. Nothing works except going for ESR builds before the Australis UI was implemented (Pale Moon in particular).Sorry, but I was using Pale Moon when I made that post. That may have given the wrong impression of my Firefox setup. I would change the "System Details" section of the question if I knew how. The Mozilla support forums seem hellbent on stopping any attempts of correcting my initial error.
My Firefox install doesn't work even with a clean install or in safe mode. I deleted pref.js and localstore.rdf as well as used the "Restart with Addons" disable option. Both options redundant since they were performed on a clean install, but neither helped. Currently, I am running a vanilla Firefox 31 install without any addons and with all plugins disabled. The only option thing I changed (besides disabling the plugins) was ticking off the "Don't load tabs until selected".
Currently, with even just a clean install, the hamburger menu doesn't open, the about:customizing page just opens and stays blank, and Firefox just opens to about:newtab with the little speed dial type boxes automatically hidden.
If it would help, I can post the correct Troubleshooting Information from about:support. -
I Need help with the following error:
Hi, I am getting the following error:
<b>BPE_ADAPTER">SYSTEM_FAILURE_INTERNAL</b>
I have looked at some of the other threads that deal with this but since I am new to XI I am not sure where to look. I have tried to activate in SXI_CACHE and I get a code of 99 with the following error. I did not get this error in the QAS environment, only when it was moved to Prod. We have cleared and reset all of the caches and am still getting this error when I try to activate in SXI_CACHE:
<b>E 'STATUSCODE' is not a component of data object 'PAYLOAD'</b>
Can someone point me in the right direction to fix this? We just moved it to prod and need to get it fixed asap.
Thanks in advance for all of the help.
Mike CurtisHi Michael,
Before SP16:
the problem should be solved with the help of note 890760. You might find note
816430 interesting as well, but the first one should help you solve the problem.
After:
If those are already in your system, have a look at note 996631. This could be
the solution.
Regards and good luck with XI.
Jaime -
My Mac Pro starts up when I turn on the power supply (when I plug it to the outlet), BEFORE I switch on the button on the computer, why is this happening? Plus, my computer keeps freezing and blacking out and I'm forced to restart it, that's when the compter starts on its own when I turn on the power.
Hello Engender,
I should have followed up with a progress report because I eventually eliminated all the problems I was having with my Mac Pro, now it's behaving like a new computer… beautifully. I did originally take Grant's advice above, changing the setting that I had in the System Preferences > Energy Saver but that only stopped from rebooting on its own when I shut down my Mac properly. Otherwise it continued to restart on its own after freezing or crushing when I switched on the power. I took my machine to the Apple Store and after many tests they couldn't find anything wrong with it. I was very depressed about the whole business.
It was after going onto many of the other Apple related websites that I discovered that it wasn't a faulty power switch or fan, as as I originally thought, but found out that my problem was related to the Graphic Card and possibly I did not have enough ram (I had the original amount of 2 GB). The original card that came with the computer: 512 MB ATI Radeon X1900 XT was over heating and forcing my machine to shut down, I think it was because I had upgraded to OSX Lion which on its own requires at least 2 GB of ram to operate well. I added 4 GB of Ram to the 2GB I had (4GB kit (2GBx2), Apple 240-pin FBDIMM, DDR2 PC2-5300 upgrades for Apple Mac Pro (4-core) 1st Gen. - 2006-2007 Desktop/PC, CT579443 from Crucial.com about $160 for the set) and replaced the Graphic Card with ATI Radeon HD 5770 1024 MB from Apple (around $260), (ATI Radeon HD 5770 Graphics Upgrade Kit for Mac Pro (Mid 2010) - Apple Store (U.S.)) This card works very well with my original Mac Pro 2008. I installed it about two weeks ago and no problem with it starting on its own, over heating or freezing. OSX Lion works well and I'm thinking of upgrading to Mountain Lion once I learn that my Mac Pro 1.1 will work with the new hardware I installed.
Your problem could just be the power cord but I agree with you that doesn't sound right, when I mentioned faulty switch I meant the part where the power cord meets the power button, the unit which houses the power distribution, I thought at first that it could be faulty but changed my mind because of the computer overheating.
I don't know if this is of any help to you but I hope your trouble will be solved with the new cord. -
Can we solve this problem -folder with the exclamation icon
What is this folder with the exclamation icon?
Why it happens only to the iPod connected to PC?
Why it is the toughest problem to be solved?
What causes it?
Just would like to share my experience with all of you, my niece has a mini iPod that connects with a PC, however, after ejecting the iPod a few times inproperly, her iPod showed this most notorious evil icon. I followed all the instructions from the Apple web site in this forum, I did nearly ten times of Resets and Restores (I managed to restore but not everytimes), still failed to get rid of this icon, and it jsut would not disappear in the iPod. I just got very frustrated and I asked myself should I connect it with a Mac? Why not? So I connected it with my Mac, no surprise, then I put it in Disk Mode and reconnectted (few attempts), the iPod icon appeared on my Desktop but I still could not do the restore.
As I believed that iPod was the same as an external Hard Disk, and it was broken anyway, why not have another try - so I opened the Disk Utility and saw the iPod there, then I did an Erase (format) the iPod, once completed I reconnected with my Mac again, after 4 attempts, the iPod updater window popup and asked me whether I would like to do a restore, I finally managed to get rid of this icon. I connectted it with PC and was able to do a restore in my PC and got recongzied afterward. It has happened almost for 6 months and I heard that this iPod is still working fine.
My suggestion is - unless you need to do the update of song with your iPod, never and ever charged your iPod via connecting with the PC, I leave my iPod with the Bose docking system and it has no problem at all.My suggestion is - unless you need to do the update of song with your iPod, never and ever charged your iPod via connecting with the PC, I leave my iPod with the Bose docking system and it has no problem at all.
I always use the iPod AC charger to charge my iPods and I have never had any problems.
The initial cause of the problems in your post is probably that several improper ejection of the iPod. If you do not have a Mac the problem may not be solvable by yourself. -
Hi! I just bought Lion and I am having a problem with the installation. It keeps telling me that the computer's hard drive has a S.M.A.R.T. problem. How can I solve it?
Thanks!
AngelaYou may have a hard drive problem. When I installed Lion, the installer told me that it couldn't complete because the hard drive was failing (or broken, the exact words escape me). Since the HD had been functioning just fine, I took it to the Genius Bar, and found out that yes, the hard drive was slowly dying (bad sectors). I couldn't reboot into Snow Leopard, the installer wouldn't let me and then the drive just wouldn't work at all.
I had to replace my drive and restore from Time Machine. Thankfully, I had Time Machine, and had just done a backup 5 minutes before the crash.
Best of luck. -
Pacman seg fault(Solved but with comments on pacman-db-upgrade)
Performed an install from FTP and booted into root login.
Performed pacman -Syu and received report system up to date.
Performed downloads via pacman of twelve packages including xorg and xfce4.
Performed download of abs package.
Downloaded abs repos.
Modified abs extra vlc package and performed pacman -U install of modified package.
Pacman working well at this point.
Rebooted.
After reaching xfce4 Desktop, attemptd to install firefox.
Pacman -S firefox produced..... /usr/bin/pacman/ report(forget the exact error)
Subsequent trials with ...pacman -U .... produces seg fault.
Cannot use pacman. All other programs seem to perform correctly. Perhaps have lost DNS.
Cannot perform ...pacman -Syu --debug.....segfaults.
Last edited by lilsirecho (2011-07-19 18:19:49)Solved the difficulty but have no idea what can be done to prevent it from occuring for another user.
It seems that the db did not get upgraded when the ...pacman-db-upgrade ...command was executed. There was no statement for ..."pre 3.5 db" upgrade....while executing the command.
After re-install, the upgrade command performed correctly and pacman now performs correctly after reboots.
The question comes up as to what to do if the upgrade command does not work correctly and whether some indicator of correct response should appear in the beginners guide. Additionally, what can be done in the event that the upgrade command fails to meet the correct response.
These questions will in time be resolved by a new .iso but the present exposure is amazing in its consequences!
Perhaps the upgrade command is also a function of properly synced mirrors but the command requesting the upgrade was ...pacman -Syy... the mirror sync function!
What do we have...catch22?
The resultant segfaults make sense if the pacman sync db is not upgraded.
How is a user to know the upgrade failed? What to do about such a condition?
Marking this thread as solved ...with comments... -
[SOLVED] So many problems with the RTL8723au wireless card:
Hello,
I have been a long time linux user (Ubuntu & CentOS) and recently switched to Arch Linux. My laptop usually has strange issues with all sorts of stuff when it runs Linux like graphics cards, brightness control, and WiFi. So far I have been able to fix the first two on my own from the wiki.
In Ubuntu I was used to having to clone into https://github.com/lwfinger/rtl8723au and then making the driver. After a quick modprobe 8723au the wireless interface came up and was working perfectly with NetworkManager.
After doing the same thing with Arch, NetworkManager cannot connect to the internet, neither can Wicd which gets stuck at the Authentication step. I finally disabled both of these services and used wpa_supplicant to successfully connect but after a lot of errors. I am pretty sure something is wrong with the wireless driver, and not Wicd, NetworkManager, and wpa_supplicant at the same time.
There is no output from iw dev
'Not connected.' from iw dev wlp0s26u1u4i2 even though wpa_supplicant is connected to the internet.
Output of sudo wpa_supplicant -Dwext -iwlp0s26u1u4i2 -c./wpa_test :
(wpa_supplicant takes a good 3 minutes to connect)
Successfully initialized wpa_supplicant
ioctl[SIOCSIWAP]: Operation not permitted
ioctl[SIOCSIWENCODEEXT]: Invalid argument
ioctl[SIOCSIWENCODEEXT]: Invalid argument
wlp0s26u1u4i2: Trying to associate with 00:22:3f:84:59:74 (SSID='Eden' freq=2437 MHz)
wlp0s26u1u4i2: Association request to the driver failed
wlp0s26u1u4i2: Associated with 00:22:3f:84:59:74
wlp0s26u1u4i2: WPA: Key negotiation completed with 00:22:3f:84:59:74 [PTK=TKIP GTK=TKIP]
wlp0s26u1u4i2: CTRL-EVENT-CONNECTED - Connection to 00:22:3f:84:59:74 completed [id=0 id_str=]
wlp0s26u1u4i2: Trying to associate with 00:22:3f:84:59:74 (SSID='Eden' freq=2437 MHz)
wlp0s26u1u4i2: Association request to the driver failed
wlp0s26u1u4i2: CTRL-EVENT-DISCONNECTED bssid=00:22:3f:84:59:74 reason=0
wlp0s26u1u4i2: Associated with 00:22:3f:84:59:74
wlp0s26u1u4i2: CTRL-EVENT-EAP-STARTED EAP authentication started
EAP: buildIdentity: identity configuration was not available
wlp0s26u1u4i2: CTRL-REQ-IDENTITY-0:Identity needed for SSID Eden
wlp0s26u1u4i2: CTRL-EVENT-EAP-FAILURE EAP authentication failed
wlp0s26u1u4i2: Authentication with 00:22:3f:84:59:74 timed out.
ioctl[SIOCSIWAP]: Operation not permitted
wlp0s26u1u4i2: CTRL-EVENT-DISCONNECTED bssid=00:22:3f:84:59:74 reason=3 locally_generated=1
wlp0s26u1u4i2: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Eden" auth_failures=1 duration=10
wlp0s26u1u4i2: CTRL-EVENT-SSID-REENABLED id=0 ssid="Eden"
wlp0s26u1u4i2: Trying to associate with 00:22:3f:84:59:74 (SSID='Eden' freq=2437 MHz)
wlp0s26u1u4i2: Association request to the driver failed
wlp0s26u1u4i2: Associated with 00:22:3f:84:59:74
wlp0s26u1u4i2: CTRL-EVENT-DISCONNECTED bssid=00:22:3f:84:59:74 reason=0
wlp0s26u1u4i2: WPA: 4-Way Handshake failed - pre-shared key may be incorrect
wlp0s26u1u4i2: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Eden" auth_failures=2 duration=20
wlp0s26u1u4i2: CTRL-EVENT-SSID-REENABLED id=0 ssid="Eden"
wlp0s26u1u4i2: Trying to associate with 00:22:3f:84:59:74 (SSID='Eden' freq=2437 MHz)
wlp0s26u1u4i2: Association request to the driver failed
wlp0s26u1u4i2: Associated with 00:22:3f:84:59:74
wlp0s26u1u4i2: WPA: Key negotiation completed with 00:22:3f:84:59:74 [PTK=TKIP GTK=TKIP]
wlp0s26u1u4i2: CTRL-EVENT-CONNECTED - Connection to 00:22:3f:84:59:74 completed
Output of dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.7-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.2 20140206 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Mar 24 20:06:08 CET 2014
[ 0.000000] Command line: initrd=\initramfs-linux.img root=/dev/sda2 video.use_native_backlight=1 rw
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000087fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000c4daffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c4db0000-0x00000000c61affff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c61b0000-0x00000000ca7befff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ca7bf000-0x00000000caebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000caebf000-0x00000000cafbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cafbf000-0x00000000caffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cb000000-0x00000000cf9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed98000-0x00000000fed9ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffcc0000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022f5fffff] usable
[ 0.000000] e820: update [mem 0xc3dad018-0xc3dbd057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000087fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000040005000-0x00000000c3dad017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c3dad018-0x00000000c3dbd057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c3dbd058-0x00000000c4daffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c4db0000-0x00000000c61affff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000c61b0000-0x00000000ca7befff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ca7bf000-0x00000000caebefff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000caebf000-0x00000000cafbefff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000cafbf000-0x00000000caffefff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000cafff000-0x00000000caffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000cb000000-0x00000000cf9fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed98000-0x00000000fed9ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ffcc0000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000022f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by INSYDE Corp.
[ 0.000000] efi: ACPI=0xcaffe000 ACPI 2.0=0xcaffe014 SMBIOS=0xcaebef98
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000001000-0x0000000000007000) (0MB)
[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000007000-0x000000000006f000) (0MB)
[ 0.000000] efi: mem03: type=4, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB)
[ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000070000-0x0000000000088000) (0MB)
[ 0.000000] efi: mem05: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001f61000) (15MB)
[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000001f61000-0x0000000020000000) (480MB)
[ 0.000000] efi: mem09: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
[ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000020200000-0x0000000040004000) (510MB)
[ 0.000000] efi: mem11: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000040005000-0x000000007fcf8000) (1020MB)
[ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x000000007fcf8000-0x0000000080000000) (3MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000080000000-0x00000000c31c0000) (1073MB)
[ 0.000000] efi: mem15: type=4, attr=0xf, range=[0x00000000c31c0000-0x00000000c31e0000) (0MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x00000000c31e0000-0x00000000c3dad000) (11MB)
[ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x00000000c3dad000-0x00000000c3dbe000) (0MB)
[ 0.000000] efi: mem18: type=1, attr=0xf, range=[0x00000000c3dbe000-0x00000000c418a000) (3MB)
[ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x00000000c418a000-0x00000000c4db0000) (12MB)
[ 0.000000] efi: mem20: type=0, attr=0xf, range=[0x00000000c4db0000-0x00000000c61b0000) (20MB)
[ 0.000000] efi: mem21: type=7, attr=0xf, range=[0x00000000c61b0000-0x00000000c61b8000) (0MB)
[ 0.000000] efi: mem22: type=2, attr=0xf, range=[0x00000000c61b8000-0x00000000c61bb000) (0MB)
[ 0.000000] efi: mem23: type=7, attr=0xf, range=[0x00000000c61bb000-0x00000000c61bc000) (0MB)
[ 0.000000] efi: mem24: type=2, attr=0xf, range=[0x00000000c61bc000-0x00000000c61bd000) (0MB)
[ 0.000000] efi: mem25: type=7, attr=0xf, range=[0x00000000c61bd000-0x00000000c61be000) (0MB)
[ 0.000000] efi: mem26: type=2, attr=0xf, range=[0x00000000c61be000-0x00000000c61bf000) (0MB)
[ 0.000000] efi: mem27: type=7, attr=0xf, range=[0x00000000c61bf000-0x00000000c63a8000) (1MB)
[ 0.000000] efi: mem28: type=1, attr=0xf, range=[0x00000000c63a8000-0x00000000c63bf000) (0MB)
[ 0.000000] efi: mem29: type=7, attr=0xf, range=[0x00000000c63bf000-0x00000000c7b67000) (23MB)
[ 0.000000] efi: mem30: type=4, attr=0xf, range=[0x00000000c7b67000-0x00000000c864a000) (10MB)
[ 0.000000] efi: mem31: type=7, attr=0xf, range=[0x00000000c864a000-0x00000000c864c000) (0MB)
[ 0.000000] efi: mem32: type=4, attr=0xf, range=[0x00000000c864c000-0x00000000c864e000) (0MB)
[ 0.000000] efi: mem33: type=7, attr=0xf, range=[0x00000000c864e000-0x00000000c8650000) (0MB)
[ 0.000000] efi: mem34: type=4, attr=0xf, range=[0x00000000c8650000-0x00000000c8697000) (0MB)
[ 0.000000] efi: mem35: type=7, attr=0xf, range=[0x00000000c8697000-0x00000000c8699000) (0MB)
[ 0.000000] efi: mem36: type=4, attr=0xf, range=[0x00000000c8699000-0x00000000c86cb000) (0MB)
[ 0.000000] efi: mem37: type=7, attr=0xf, range=[0x00000000c86cb000-0x00000000c86cc000) (0MB)
[ 0.000000] efi: mem38: type=4, attr=0xf, range=[0x00000000c86cc000-0x00000000c87ff000) (1MB)
[ 0.000000] efi: mem39: type=7, attr=0xf, range=[0x00000000c87ff000-0x00000000c8803000) (0MB)
[ 0.000000] efi: mem40: type=4, attr=0xf, range=[0x00000000c8803000-0x00000000c8806000) (0MB)
[ 0.000000] efi: mem41: type=7, attr=0xf, range=[0x00000000c8806000-0x00000000c8807000) (0MB)
[ 0.000000] efi: mem42: type=4, attr=0xf, range=[0x00000000c8807000-0x00000000c885a000) (0MB)
[ 0.000000] efi: mem43: type=7, attr=0xf, range=[0x00000000c885a000-0x00000000c88b3000) (0MB)
[ 0.000000] efi: mem44: type=4, attr=0xf, range=[0x00000000c88b3000-0x00000000c8c65000) (3MB)
[ 0.000000] efi: mem45: type=7, attr=0xf, range=[0x00000000c8c65000-0x00000000c8c67000) (0MB)
[ 0.000000] efi: mem46: type=4, attr=0xf, range=[0x00000000c8c67000-0x00000000c8c78000) (0MB)
[ 0.000000] efi: mem47: type=7, attr=0xf, range=[0x00000000c8c78000-0x00000000c8c7c000) (0MB)
[ 0.000000] efi: mem48: type=4, attr=0xf, range=[0x00000000c8c7c000-0x00000000c8c7d000) (0MB)
[ 0.000000] efi: mem49: type=7, attr=0xf, range=[0x00000000c8c7d000-0x00000000c8c7e000) (0MB)
[ 0.000000] efi: mem50: type=4, attr=0xf, range=[0x00000000c8c7e000-0x00000000ca3bf000) (23MB)
[ 0.000000] efi: mem51: type=7, attr=0xf, range=[0x00000000ca3bf000-0x00000000ca435000) (0MB)
[ 0.000000] efi: mem52: type=3, attr=0xf, range=[0x00000000ca435000-0x00000000ca7bf000) (3MB)
[ 0.000000] efi: mem53: type=5, attr=0x800000000000000f, range=[0x00000000ca7bf000-0x00000000ca865000) (0MB)
[ 0.000000] efi: mem54: type=6, attr=0x800000000000000f, range=[0x00000000ca865000-0x00000000ca866000) (0MB)
[ 0.000000] efi: mem55: type=5, attr=0x800000000000000f, range=[0x00000000ca866000-0x00000000ca868000) (0MB)
[ 0.000000] efi: mem56: type=6, attr=0x800000000000000f, range=[0x00000000ca868000-0x00000000ca869000) (0MB)
[ 0.000000] efi: mem57: type=5, attr=0x800000000000000f, range=[0x00000000ca869000-0x00000000ca86f000) (0MB)
[ 0.000000] efi: mem58: type=6, attr=0x800000000000000f, range=[0x00000000ca86f000-0x00000000ca870000) (0MB)
[ 0.000000] efi: mem59: type=5, attr=0x800000000000000f, range=[0x00000000ca870000-0x00000000ca883000) (0MB)
[ 0.000000] efi: mem60: type=6, attr=0x800000000000000f, range=[0x00000000ca883000-0x00000000ca884000) (0MB)
[ 0.000000] efi: mem61: type=5, attr=0x800000000000000f, range=[0x00000000ca884000-0x00000000ca894000) (0MB)
[ 0.000000] efi: mem62: type=6, attr=0x800000000000000f, range=[0x00000000ca894000-0x00000000ca895000) (0MB)
[ 0.000000] efi: mem63: type=5, attr=0x800000000000000f, range=[0x00000000ca895000-0x00000000ca8a9000) (0MB)
[ 0.000000] efi: mem64: type=6, attr=0x800000000000000f, range=[0x00000000ca8a9000-0x00000000ca8aa000) (0MB)
[ 0.000000] efi: mem65: type=5, attr=0x800000000000000f, range=[0x00000000ca8aa000-0x00000000ca8e3000) (0MB)
[ 0.000000] efi: mem66: type=6, attr=0x800000000000000f, range=[0x00000000ca8e3000-0x00000000ca935000) (0MB)
[ 0.000000] efi: mem67: type=5, attr=0x800000000000000f, range=[0x00000000ca935000-0x00000000ca9bf000) (0MB)
[ 0.000000] efi: mem68: type=6, attr=0x800000000000000f, range=[0x00000000ca9bf000-0x00000000caabf000) (1MB)
[ 0.000000] efi: mem69: type=0, attr=0xf, range=[0x00000000caabf000-0x00000000caebf000) (4MB)
[ 0.000000] efi: mem70: type=10, attr=0xf, range=[0x00000000caebf000-0x00000000cafbf000) (1MB)
[ 0.000000] efi: mem71: type=9, attr=0xf, range=[0x00000000cafbf000-0x00000000cafff000) (0MB)
[ 0.000000] efi: mem72: type=4, attr=0xf, range=[0x00000000cafff000-0x00000000cb000000) (0MB)
[ 0.000000] efi: mem73: type=7, attr=0xf, range=[0x0000000100000000-0x000000022f600000) (4854MB)
[ 0.000000] efi: mem74: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[ 0.000000] efi: mem75: type=0, attr=0x0, range=[0x00000000cb000000-0x00000000cfa00000) (74MB)
[ 0.000000] efi: mem76: type=11, attr=0x8000000000000001, range=[0x00000000f0000000-0x00000000f4000000) (64MB)
[ 0.000000] efi: mem77: type=11, attr=0x8000000000000001, range=[0x00000000feb00000-0x00000000feb04000) (0MB)
[ 0.000000] efi: mem78: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem79: type=11, attr=0x8000000000000001, range=[0x00000000fed10000-0x00000000fed1a000) (0MB)
[ 0.000000] efi: mem80: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem81: type=0, attr=0x0, range=[0x00000000fed98000-0x00000000feda0000) (0MB)
[ 0.000000] efi: mem82: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem83: type=11, attr=0x8000000000000000, range=[0x00000000ffcc0000-0x0000000100000000) (3MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 20175/INVALID, BIOS 66CN54WW 01/21/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x22f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
[ 0.000000] 3 base 0C8000000 mask FFE000000 write-back
[ 0.000000] 4 base 0CA000000 mask FFF000000 write-back
[ 0.000000] 5 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 6 base 100000000 mask F00000000 write-back
[ 0.000000] 7 base 200000000 mask FC0000000 write-back
[ 0.000000] 8 base 22F600000 mask FFFE00000 uncachable
[ 0.000000] 9 base 22F800000 mask FFF800000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000082000] 82000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02b3f000, 0x02b3ffff] PGTABLE
[ 0.000000] BRK [0x02b40000, 0x02b40fff] PGTABLE
[ 0.000000] BRK [0x02b41000, 0x02b41fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x22f400000-0x22f5fffff]
[ 0.000000] [mem 0x22f400000-0x22f5fffff] page 2M
[ 0.000000] BRK [0x02b42000, 0x02b42fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x22c000000-0x22f3fffff]
[ 0.000000] [mem 0x22c000000-0x22f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x22bffffff]
[ 0.000000] [mem 0x200000000-0x22bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x40003fff] page 4k
[ 0.000000] BRK [0x02b43000, 0x02b43fff] PGTABLE
[ 0.000000] BRK [0x02b44000, 0x02b44fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x40005000-0xc4daffff]
[ 0.000000] [mem 0x40005000-0x401fffff] page 4k
[ 0.000000] [mem 0x40200000-0xc4bfffff] page 2M
[ 0.000000] [mem 0xc4c00000-0xc4daffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xc61b0000-0xca7befff]
[ 0.000000] [mem 0xc61b0000-0xc61fffff] page 4k
[ 0.000000] [mem 0xc6200000-0xca5fffff] page 2M
[ 0.000000] [mem 0xca600000-0xca7befff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xcafff000-0xcaffffff]
[ 0.000000] [mem 0xcafff000-0xcaffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x7fcf8000-0x7fffffff]
[ 0.000000] ACPI: RSDP 00000000caffe014 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000caffe210 0000DC (v01 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: FACP 00000000caff5000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 00000000cafe9000 008814 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FACS 00000000cafbb000 000040
[ 0.000000] ACPI: SLIC 00000000caffd000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: UEFI 00000000caffc000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000caffb000 000662 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000caffa000 000A39 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000caff9000 000098 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000caff8000 000058 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000caff7000 000757 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 00000000caff6000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 00000000caff4000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 00000000caff3000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 00000000caff2000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: WDAT 00000000cafe8000 000224 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000cafe6000 001068 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BOOT 00000000cafe4000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASPT 00000000cafe2000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DBGP 00000000cafe1000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 00000000cafdf000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MSDM 00000000cafde000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000cafdd000 0009AA (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000cafdc000 000B22 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DMAR 00000000cafdb000 0000B8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BGRT 00000000cafda000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x22f5fffff]
[ 0.000000] NODE_DATA [mem 0x22f5f1000-0x22f5f5fff]
[ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880226c00000-ffff88022ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x22f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00087fff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0xc4daffff]
[ 0.000000] node 0: [mem 0xc61b0000-0xca7befff]
[ 0.000000] node 0: [mem 0xcafff000-0xcaffffff]
[ 0.000000] node 0: [mem 0x100000000-0x22f5fffff]
[ 0.000000] On node 0 totalpages: 2066246
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3975 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12807 pages used for memmap
[ 0.000000] DMA32 zone: 819647 pages, LIFO batch:31
[ 0.000000] Normal zone: 19416 pages used for memmap
[ 0.000000] Normal zone: 1242624 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc3dad000-0xc3dadfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc3dbd000-0xc3dbdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc4db0000-0xc61affff]
[ 0.000000] PM: Registered nosave memory: [mem 0xca7bf000-0xcaebefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcaebf000-0xcafbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcafbf000-0xcaffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfa00000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfed97fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed98000-0xfed9ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeda0000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffcbffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffcc0000-0xffffffff]
[ 0.000000] e820: [mem 0xcfa00000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88022f200000 s86336 r8192 d24256 u262144
[ 0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2033937
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 video.use_native_backlight=1 rw
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7994740K/8264984K available (5271K kernel code, 836K rwdata, 1676K rodata, 1128K init, 1324K bss, 270244K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:8448 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 2494.288 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.43 BogoMIPS (lpj=8314293)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000021] init_memory_mapping: [mem 0xca7bf000-0xca864fff]
[ 0.000024] [mem 0xca7bf000-0xca864fff] page 4k
[ 0.000040] init_memory_mapping: [mem 0xca865000-0xca865fff]
[ 0.000041] [mem 0xca865000-0xca865fff] page 4k
[ 0.000049] init_memory_mapping: [mem 0xca866000-0xca867fff]
[ 0.000050] [mem 0xca866000-0xca867fff] page 4k
[ 0.000058] init_memory_mapping: [mem 0xca868000-0xca868fff]
[ 0.000059] [mem 0xca868000-0xca868fff] page 4k
[ 0.000067] init_memory_mapping: [mem 0xca869000-0xca86efff]
[ 0.000068] [mem 0xca869000-0xca86efff] page 4k
[ 0.000077] init_memory_mapping: [mem 0xca86f000-0xca86ffff]
[ 0.000078] [mem 0xca86f000-0xca86ffff] page 4k
[ 0.000086] init_memory_mapping: [mem 0xca870000-0xca882fff]
[ 0.000087] [mem 0xca870000-0xca882fff] page 4k
[ 0.000095] init_memory_mapping: [mem 0xca883000-0xca883fff]
[ 0.000096] [mem 0xca883000-0xca883fff] page 4k
[ 0.000104] init_memory_mapping: [mem 0xca884000-0xca893fff]
[ 0.000105] [mem 0xca884000-0xca893fff] page 4k
[ 0.000113] init_memory_mapping: [mem 0xca894000-0xca894fff]
[ 0.000114] [mem 0xca894000-0xca894fff] page 4k
[ 0.000121] init_memory_mapping: [mem 0xca895000-0xca8a8fff]
[ 0.000123] [mem 0xca895000-0xca8a8fff] page 4k
[ 0.000130] init_memory_mapping: [mem 0xca8a9000-0xca8a9fff]
[ 0.000132] [mem 0xca8a9000-0xca8a9fff] page 4k
[ 0.000139] init_memory_mapping: [mem 0xca8aa000-0xca8e2fff]
[ 0.000140] [mem 0xca8aa000-0xca8e2fff] page 4k
[ 0.000148] init_memory_mapping: [mem 0xca8e3000-0xca934fff]
[ 0.000149] [mem 0xca8e3000-0xca934fff] page 4k
[ 0.000158] init_memory_mapping: [mem 0xca935000-0xca9befff]
[ 0.000159] [mem 0xca935000-0xca9befff] page 4k
[ 0.000168] init_memory_mapping: [mem 0xca9bf000-0xcaabefff]
[ 0.000169] [mem 0xca9bf000-0xcaabefff] page 4k
[ 0.023864] Security Framework initialized
[ 0.023874] AppArmor: AppArmor disabled by boot time parameter
[ 0.023876] Yama: becoming mindful.
[ 0.024490] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.027098] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.028239] Mount-cache hash table entries: 256
[ 0.028442] Initializing cgroup subsys memory
[ 0.028448] Initializing cgroup subsys devices
[ 0.028450] Initializing cgroup subsys freezer
[ 0.028452] Initializing cgroup subsys net_cls
[ 0.028454] Initializing cgroup subsys blkio
[ 0.028478] CPU: Physical Processor ID: 0
[ 0.028479] CPU: Processor Core ID: 0
[ 0.028485] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.028953] mce: CPU supports 7 MCE banks
[ 0.028966] CPU0: Thermal monitoring enabled (TM1)
[ 0.028975] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 2
[ 0.029094] Freeing SMP alternatives memory: 20K (ffffffff819ed000 - ffffffff819f2000)
[ 0.030319] ACPI: Core revision 20131115
[ 0.038302] ACPI: All ACPI Tables successfully acquired
[ 0.052784] ftrace: allocating 21068 entries in 83 pages
[ 0.064716] dmar: Host address width 36
[ 0.064719] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.064726] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.064727] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.064732] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.064734] dmar: RMRR base: 0x000000cae8c000 end: 0x000000caeabfff
[ 0.064735] dmar: RMRR base: 0x000000cb800000 end: 0x000000cf9fffff
[ 0.064810] IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1
[ 0.064811] HPET id 0 under DRHD base 0xfed91000
[ 0.064984] Enabled IRQ remapping in x2apic mode
[ 0.064986] Enabling x2apic
[ 0.064988] Enabled x2apic
[ 0.064996] Switched APIC routing to cluster x2apic.
[ 0.065463] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.098505] smpboot: CPU0: Intel(R) Core(TM) i7-3537U CPU @ 2.00GHz (fam: 06, model: 3a, stepping: 09)
[ 0.098516] TSC deadline timer enabled
[ 0.098529] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.098537] ... version: 3
[ 0.098538] ... bit width: 48
[ 0.098539] ... generic registers: 4
[ 0.098540] ... value mask: 0000ffffffffffff
[ 0.098541] ... max period: 0000ffffffffffff
[ 0.098542] ... fixed-purpose events: 3
[ 0.098543] ... event mask: 000000070000000f
[ 0.125340] x86: Booting SMP configuration:
[ 0.139207] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.125342] .... node #0, CPUs: #1 #2 #3
[ 0.179947] x86: Booted up 1 node, 4 CPUs
[ 0.179950] smpboot: Total of 4 processors activated (19962.73 BogoMIPS)
[ 0.184637] devtmpfs: initialized
[ 0.187964] PM: Registering ACPI NVS region [mem 0xcaebf000-0xcafbefff] (1048576 bytes)
[ 0.188857] RTC time: 16:04:30, date: 03/26/14
[ 0.188897] NET: Registered protocol family 16
[ 0.189005] cpuidle: using governor ladder
[ 0.189006] cpuidle: using governor menu
[ 0.189036] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.189038] ACPI: bus type PCI registered
[ 0.189040] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.189115] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.189117] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.197814] PCI: Using configuration type 1 for base access
[ 0.198491] bio: create slab <bio-0> at 0
[ 0.198622] ACPI: Added _OSI(Module Device)
[ 0.198623] ACPI: Added _OSI(Processor Device)
[ 0.198625] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.198626] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.201979] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.218281] ACPI: SSDT 00000000cae17018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20121220)
[ 0.218701] ACPI: Dynamic OEM Table Load:
[ 0.218703] ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20121220)
[ 0.231416] ACPI: SSDT 00000000cae18a98 000303 (v01 PmRef ApIst 00003000 INTL 20121220)
[ 0.231864] ACPI: Dynamic OEM Table Load:
[ 0.231866] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20121220)
[ 0.241296] ACPI: SSDT 00000000cae16d98 000119 (v01 PmRef ApCst 00003000 INTL 20121220)
[ 0.241708] ACPI: Dynamic OEM Table Load:
[ 0.241710] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20121220)
[ 0.678858] ACPI: Interpreter enabled
[ 0.678866] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.678871] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.678887] ACPI: (supports S0 S3 S4 S5)
[ 0.678889] ACPI: Using IOAPIC for interrupt routing
[ 0.678920] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.679079] ACPI: No dock devices found.
[ 0.685419] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.685425] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.685568] \_SB_.PCI0:_OSC invalid UUID
[ 0.685569] _OSC request data:1 1f 0
[ 0.685574] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.686120] PCI host bridge to bus 0000:00
[ 0.686123] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.686126] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.686128] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.686130] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.686132] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.686133] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.686135] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.686137] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[ 0.686139] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.686141] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.686142] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.686144] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.686146] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.686148] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.686150] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.686152] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 0.686153] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff]
[ 0.686163] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.686272] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.686286] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
[ 0.686294] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.686300] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f]
[ 0.686402] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[ 0.686414] pci 0000:00:04.0: reg 0x10: [mem 0xfed98000-0xfed9ffff 64bit]
[ 0.686545] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.686571] pci 0000:00:14.0: reg 0x10: [mem 0xe0400000-0xe040ffff 64bit]
[ 0.686651] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.686706] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.686750] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.686777] pci 0000:00:16.0: reg 0x10: [mem 0xe041c000-0xe041c00f 64bit]
[ 0.686860] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.686964] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.686989] pci 0000:00:1a.0: reg 0x10: [mem 0xe0421000-0xe04213ff]
[ 0.687090] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.687163] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.687207] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.687225] pci 0000:00:1b.0: reg 0x10: [mem 0xe0418000-0xe041bfff 64bit]
[ 0.687303] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.687360] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.687405] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.687430] pci 0000:00:1d.0: reg 0x10: [mem 0xe0420000-0xe04203ff]
[ 0.687530] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.687599] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.687643] pci 0000:00:1f.0: [8086:1e56] type 00 class 0x060100
[ 0.687844] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.687867] pci 0000:00:1f.2: reg 0x10: [io 0x2088-0x208f]
[ 0.687876] pci 0000:00:1f.2: reg 0x14: [io 0x2094-0x2097]
[ 0.687885] pci 0000:00:1f.2: reg 0x18: [io 0x2080-0x2087]
[ 0.687895] pci 0000:00:1f.2: reg 0x1c: [io 0x2090-0x2093]
[ 0.687904] pci 0000:00:1f.2: reg 0x20: [io 0x2060-0x207f]
[ 0.687915] pci 0000:00:1f.2: reg 0x24: [mem 0xe041f000-0xe041f7ff]
[ 0.687967] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.688054] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.688073] pci 0000:00:1f.3: reg 0x10: [mem 0xe041d000-0xe041d0ff 64bit]
[ 0.688097] pci 0000:00:1f.3: reg 0x20: [io 0x2040-0x205f]
[ 0.688200] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
[ 0.688225] pci 0000:00:1f.6: reg 0x10: [mem 0xe041e000-0xe041efff 64bit]
[ 0.688950] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.689014] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.689078] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.689138] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.689201] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.689262] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.689329] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.689391] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.689694] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.689701] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.689762] Found 1 acpi root devices
[ 0.689805] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.689890] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.689893] vgaarb: loaded
[ 0.689894] vgaarb: bridge control possible 0000:00:02.0
[ 0.689928] PCI: Using ACPI for IRQ routing
[ 0.691760] PCI: pci_cache_line_size set to 64 bytes
[ 0.691768] pci 0000:00:04.0: no compatible bridge window for [mem 0xfed98000-0xfed9ffff 64bit]
[ 0.691809] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[ 0.691811] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.691813] e820: reserve RAM buffer [mem 0xc3dad018-0xc3ffffff]
[ 0.691814] e820: reserve RAM buffer [mem 0xc4db0000-0xc7ffffff]
[ 0.691816] e820: reserve RAM buffer [mem 0xca7bf000-0xcbffffff]
[ 0.691818] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
[ 0.691819] e820: reserve RAM buffer [mem 0x22f600000-0x22fffffff]
[ 0.691905] NetLabel: Initializing
[ 0.691906] NetLabel: domain hash size = 128
[ 0.691907] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.691921] NetLabel: unlabeled traffic allowed by default
[ 0.691943] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.691949] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.693981] Switched to clocksource hpet
[ 0.698589] pnp: PnP ACPI init
[ 0.698603] ACPI: bus type PNP registered
[ 0.698701] pnp 00:00: [dma 4]
[ 0.698727] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.698749] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.698850] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.698888] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.698933] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.698935] system 00:04: [io 0x1000-0x100f] has been reserved
[ 0.698937] system 00:04: [io 0xffff] has been reserved
[ 0.698939] system 00:04: [io 0xffff] has been reserved
[ 0.698942] system 00:04: [io 0x0400-0x0453] could not be reserved
[ 0.698944] system 00:04: [io 0x0458-0x047f] has been reserved
[ 0.698946] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.698948] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.698951] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.698982] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.699027] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.699031] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.699074] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.699112] pnp 00:08: Plug and Play ACPI device, IDs SYN2b01 SYN2b00 SYN0002 PNP0f13 (active)
[ 0.699241] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.699243] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.699245] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.699248] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.699250] system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.699252] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.699254] system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.699257] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.699259] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.699261] system 00:09: [mem 0xcfa00000-0xcfa00fff] has been reserved
[ 0.699264] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.699560] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved
[ 0.699562] system 00:0a: [mem 0x40004000-0x40004fff] has been reserved
[ 0.699565] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.699582] pnp: PnP ACPI: found 11 devices
[ 0.699583] ACPI: bus type PNP unregistered
[ 0.706306] pci 0000:00:04.0: BAR 0: assigned [mem 0xcfa08000-0xcfa0ffff 64bit]
[ 0.706314] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.706316] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.706319] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.706320] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.706322] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.706324] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.706326] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.706328] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.706330] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.706332] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.706334] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.706336] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.706338] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.706340] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[ 0.706342] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[ 0.706344] pci_bus 0000:00: resource 19 [mem 0xcfa00000-0xfeafffff]
[ 0.706377] NET: Registered protocol family 2
[ 0.706559] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.706739] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.706918] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.706937] TCP: reno registered
[ 0.706951] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.706985] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.707065] NET: Registered protocol family 1
[ 0.707077] pci 0000:00:02.0: Boot video device
[ 0.734160] PCI: CLS 64 bytes, default 64
[ 0.734206] Unpacking initramfs...
[ 0.799245] Freeing initrd memory: 3104K (ffff88007fcf8000 - ffff880080000000)
[ 0.799255] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.799258] software IO TLB [mem 0xbf1c0000-0xc31c0000] (64MB) mapped at [ffff8800bf1c0000-ffff8800c31bffff]
[ 0.799286] Simple Boot Flag at 0x44 set to 0x1
[ 0.799482] Scanning for low memory corruption every 60 seconds
[ 0.799787] audit: initializing netlink socket (disabled)
[ 0.799797] type=2000 audit(1395849870.769:1): initialized
[ 0.815211] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.816571] zbud: loaded
[ 0.816755] VFS: Disk quotas dquot_6.5.2
[ 0.816796] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.816964] msgmni has been set to 15732
[ 0.817018] Key type big_key registered
[ 0.817253] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.817299] io scheduler noop registered
[ 0.817302] io scheduler deadline registered
[ 0.817333] io scheduler cfq registered (default)
[ 0.817390] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.817405] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.817464] efifb: probing for efifb
[ 0.818285] efifb: framebuffer at 0xd0000000, mapped to 0xffffc90009280000, using 5628k, total 5625k
[ 0.818287] efifb: mode is 1600x900x32, linelength=6400, pages=1
[ 0.818288] efifb: scrolling: redraw
[ 0.818289] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.823011] Console: switching to colour frame buffer device 200x56
[ 0.827654] fb0: EFI VGA frame buffer device
[ 0.827662] intel_idle: MWAIT substates: 0x21120
[ 0.827664] intel_idle: v0.4 model 0x3A
[ 0.827665] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.827817] GHES: HEST is not enabled!
[ 0.827872] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.828333] Linux agpgart interface v0.103
[ 0.828392] rtc_cmos 00:05: RTC can wake from S4
[ 0.828526] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.828569] rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.828579] Intel P-state driver initializing.
[ 0.828589] Intel pstate controlling: cpu 0
[ 0.828603] Intel pstate controlling: cpu 1
[ 0.828627] Intel pstate controlling: cpu 2
[ 0.828638] Intel pstate controlling: cpu 3
[ 0.828736] drop_monitor: Initializing network drop monitor service
[ 0.828775] TCP: cubic registered
[ 0.828835] NET: Registered protocol family 10
[ 0.828947] NET: Registered protocol family 17
[ 0.828953] Key type dns_resolver registered
[ 0.829123] registered taskstats version 1
[ 0.829544] Magic number: 6:146:86
[ 0.829615] rtc_cmos 00:05: setting system clock to 2014-03-26 16:04:31 UTC (1395849871)
[ 0.829652] PM: Hibernation image not present or could not be loaded.
[ 0.830252] Freeing unused kernel memory: 1128K (ffffffff818d3000 - ffffffff819ed000)
[ 0.830253] Write protecting the kernel read-only data: 8192k
[ 0.831855] Freeing unused kernel memory: 860K (ffff880002529000 - ffff880002600000)
[ 0.832573] Freeing unused kernel memory: 372K (ffff8800027a3000 - ffff880002800000)
[ 0.837842] random: systemd-tmpfile urandom read with 2 bits of entropy available
[ 0.838870] systemd-udevd[56]: starting version 211
[ 0.853108] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.860944] ACPI: bus type USB registered
[ 0.860963] usbcore: registered new interface driver usbfs
[ 0.860970] usbcore: registered new interface driver hub
[ 0.861033] usbcore: registered new device driver usb
[ 0.861644] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.862015] ehci-pci: EHCI PCI platform driver
[ 0.862170] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.862179] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.862201] ehci-pci 0000:00:1a.0: debug port 2
[ 0.864782] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.864821] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.866118] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.866136] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe0421000
[ 0.867411] SCSI subsystem initialized
[ 0.868417] libata version 3.00 loaded.
[ 0.874215] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.874372] hub 1-0:1.0: USB hub found
[ 0.874378] hub 1-0:1.0: 2 ports detected
[ 0.874585] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.874593] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.874605] ehci-pci 0000:00:1d.0: debug port 2
[ 0.878522] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.878538] ehci-pci 0000:00:1d.0: irq 23, io mem 0xe0420000
[ 0.887569] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.887716] hub 2-0:1.0: USB hub found
[ 0.887723] hub 2-0:1.0: 2 ports detected
[ 0.887965] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.887974] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.888073] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.888098] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
[ 0.888335] hub 3-0:1.0: USB hub found
[ 0.888348] hub 3-0:1.0: 4 ports detected
[ 0.888700] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.888703] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.888900] hub 4-0:1.0: USB hub found
[ 0.888909] hub 4-0:1.0: 4 ports detected
[ 0.891125] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.914375] ahci 0000:00:1f.2: version 3.0
[ 0.914482] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.914525] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x1 impl SATA mode
[ 0.914527] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 0.915307] scsi0 : ahci
[ 0.915378] scsi1 : ahci
[ 0.915435] scsi2 : ahci
[ 0.915484] scsi3 : ahci
[ 0.915536] scsi4 : ahci
[ 0.915587] scsi5 : ahci
[ 0.915615] ata1: SATA max UDMA/133 abar m2048@0xe041f000 port 0xe041f100 irq 43
[ 0.915616] ata2: DUMMY
[ 0.915617] ata3: DUMMY
[ 0.915617] ata4: DUMMY
[ 0.915618] ata5: DUMMY
[ 0.915619] ata6: DUMMY
[ 1.181353] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.234678] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.235451] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.235457] ata1.00: ATA-9: SAMSUNG MZMTD256HAGM-000L1, DXT42L0Q, max UDMA/133
[ 1.235461] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.236043] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.236192] ata1.00: configured for UDMA/133
[ 1.236523] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZMTD256 DXT4 PQ: 0 ANSI: 5
[ 1.239286] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 1.239503] sd 0:0:0:0: [sda] Write Protect is off
[ 1.239506] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.239553] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.241490] sda: sda1 sda2 sda3
[ 1.242898] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.303737] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.305587] hub 1-1:1.0: USB hub found
[ 1.305681] hub 1-1:1.0: 6 ports detected
[ 1.366288] systemd[1]: systemd 211 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
[ 1.366410] systemd[1]: Detected architecture 'x86-64'.
[ 1.366949] systemd[1]: Set hostname to <ArchYogi>.
[ 1.371967] systemd-efi-boot-generator[115]: Checking was requested for /dev/disk/by-partuuid/3729fee9-5517-4bce-aed1-950a27a8114c, but /sbin/fsck.vfat cannot be used: No such file or directory
[ 1.371970] systemd-fstab-generator[117]: Checking was requested for /dev/disk/by-uuid/C8B9-B8D5, but /sbin/fsck.vfat cannot be used: No such file or directory
[ 1.407523] systemd[1]: Starting Login Prompts.
[ 1.407601] systemd[1]: Reached target Login Prompts.
[ 1.407612] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 1.407652] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 1.407662] systemd[1]: Starting Remote File Systems.
[ 1.407717] systemd[1]: Reached target Remote File Systems.
[ 1.407737] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 1.407857] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 1.407872] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 1.407894] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 1.407901] systemd[1]: Starting Paths.
[ 1.407950] systemd[1]: Reached target Paths.
[ 1.407960] systemd[1]: Starting Encrypted Volumes.
[ 1.408010] systemd[1]: Reached target Encrypted Volumes.
[ 1.408020] systemd[1]: Expecting device dev-sda3.device...
[ 1.408063] systemd[1]: Expecting device dev-disk-by\x2duuid-a1cade15\x2dfeac\x2d4130\x2d977f\x2d86fc383ac3b0.device...
[ 1.408123] systemd[1]: Starting EFI System Partition Automount.
[ 1.408222] systemd[1]: Set up automount EFI System Partition Automount.
[ 1.408230] systemd[1]: Expecting device dev-disk-by\x2duuid-C8B9\x2dB8D5.device...
[ 1.408281] systemd[1]: Starting Root Slice.
[ 1.411504] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.412296] systemd[1]: Created slice Root Slice.
[ 1.412305] systemd[1]: Starting User and Session Slice.
[ 1.412462] systemd[1]: Created slice User and Session Slice.
[ 1.412471] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 1.412540] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 1.412548] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 1.412612] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 1.412623] systemd[1]: Starting Delayed Shutdown Socket.
[ 1.412684] systemd[1]: Listening on Delayed Shutdown Socket.
[ 1.412692] systemd[1]: Starting LVM2 metadata daemon socket.
[ 1.412756] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 1.412766] systemd[1]: Starting udev Control Socket.
[ 1.412824] systemd[1]: Listening on udev Control Socket.
[ 1.412833] systemd[1]: Starting udev Kernel Socket.
[ 1.412889] systemd[1]: Listening on udev Kernel Socket.
[ 1.412898] systemd[1]: Starting Journal Socket.
[ 1.412966] systemd[1]: Listening on Journal Socket.
[ 1.412979] systemd[1]: Starting System Slice.
[ 1.413125] systemd[1]: Created slice System Slice.
[ 1.413138] systemd[1]: Started File System Check on Root Device.
[ 1.413144] systemd[1]: Mounting Temporary Directory...
[ 1.413728] systemd[1]: Starting system-getty.slice.
[ 1.413910] systemd[1]: Created slice system-getty.slice.
[ 1.413938] systemd[1]: Mounting Debug File System...
[ 1.414223] systemd[1]: Starting udev Coldplug all Devices...
[ 1.414616] systemd[1]: Mounting Huge Pages File System...
[ 1.419477] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 1.419852] systemd[1]: Starting Setup Virtual Console...
[ 1.420199] systemd[1]: Mounting POSIX Message Queue File System...
[ 1.421416] systemd[1]: Started Load Kernel Modules.
[ 1.422447] systemd[1]: Starting Apply Kernel Variables...
[ 1.423037] systemd[1]: Mounting Configuration File System...
[ 1.423497] systemd[1]: Mounted FUSE Control File System.
[ 1.425369] systemd[1]: Started Set Up Additional Binary Formats.
[ 1.425389] systemd[1]: Starting Journal Service...
[ 1.425806] systemd[1]: Started Journal Service.
[ 1.442839] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[ 1.475136] systemd-udevd[149]: starting version 211
[ 1.522849] ACPI: AC Adapter [ADP1] (off-line)
[ 1.523074] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 1.523090] ACPI: Lid Switch [LID0]
[ 1.523129] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 1.523134] ACPI: Power Button [PWRB]
[ 1.523168] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 1.523170] ACPI: Power Button [PWRF]
[ 1.526299] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 1.526305] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.526309] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 1.526313] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.LPCB.H_EC.GPIO 2 (20131115/utaddress-251)
[ 1.526317] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.526318] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 1.526322] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.LPCB.H_EC.GPIO 2 (20131115/utaddress-251)
[ 1.526325] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.526327] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1.533112] [drm] Initialized drm 1.1.0 20060810
[ 1.534509] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
[ 1.534851] wmi: Mapper loaded
[ 1.535603] hub 2-1:1.0: USB hub found
[ 1.535690] hub 2-1:1.0: 8 ports detected
[ 1.546749] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 1.554361] ACPI: Battery Slot [BAT1] (battery present)
[ 1.557790] hda_codec: CX20590: BIOS auto-probing.
[ 1.559167] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.559170] ACPI: Thermal Zone [TZ01] (45 C)
[ 1.560277] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[ 1.564563] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 1.566923] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 1.567155] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 1.567178] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 1.570300] [drm] Memory usable by graphics device = 2048M
[ 1.570304] checking generic (d0000000 57f000) vs hw (d0000000 10000000)
[ 1.570306] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[ 1.570321] Console: switching to colour dummy device 80x25
[ 1.573241] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x17
[ 1.575075] platform microcode: Direct firmware load failed with error -2
[ 1.575079] platform microcode: Falling back to user helper
[ 1.587933] Adding 8361280k swap on /dev/sda3. Priority:-1 extents:1 across:8361280k SSFS
[ 1.605235] iTCO_vendor_support: vendor-support=0
[ 1.605675] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 1.605700] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 1.605797] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 1.606377] systemd-journald[134]: Received request to flush runtime journal from PID 1
[ 1.615249] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[ 1.616772] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x17
[ 1.616788] platform microcode: Direct firmware load failed with error -2
[ 1.616790] platform microcode: Falling back to user helper
[ 1.618686] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x17
[ 1.618695] platform microcode: Direct firmware load failed with error -2
[ 1.618696] platform microcode: Falling back to user helper
[ 1.619001] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x17
[ 1.619013] platform microcode: Direct firmware load failed with error -2
[ 1.619016] platform microcode: Falling back to user helper
[ 1.619330] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 1.621755] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[ 1.621762] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.621763] [drm] Driver supports precise vblank timestamp query.
[ 1.621848] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.715200] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[ 1.730067] fbcon: inteldrmfb (fb0) is primary device
[ 1.765339] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[ 1.802021] tsc: Refined TSC clocksource calibration: 2494.337 MHz
[ 1.830499] intel_rapl: domain uncore energy ctr 60509:60509 not working, skip
[ 1.915603] usb 1-1.5: new full-speed USB device number 5 using ehci-pci
[ 2.151154] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.152936] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
[ 2.157046] scsi6 : SCSI emulation for RTS5139 USB card reader
[ 2.157172] usbcore: registered new interface driver rts5139
[ 2.157210] scsi 6:0:0:0: Direct-Access Generic- xD/SD/M.S.Apparently one cannot run dhcpcd AND NetworkManager at the same time. I feel really stupid, but at the same time I spent most of today looking through the wiki.
For those newbies who ran into this, do this with root access:
systemctl disable dhcpcd.service
systemctl enable NetworkManager.service
Marking this as solved. -
My icloud activation lock is on my iphone, which requires an activation login to access the homescreen, but when i log in with the apple ID on the phone, it says the apple ID is not meant to unclock this iphone 5 ios 8.0.2. please help me solve this.
Yes the phone belongs to me. It was purchased from United Kingdom Vodafone to West Africa, i had to factory unlock to use any sim in it. so it belongs to me. I did the activation myself, now after updating my iphone to the latest update, it required a user id and password to activate the phone, but anytime i enter the details, it tells me the user Id is not correct but the password is correct..
-
Time Capsule Airport
Hello to all, good day, sorry my english google, but it is the tool I have at the moment. I'm having trouble with my Time Capsule Airport, I made all the settings according to the manual, but there has been a connection problem with my iMac. When I finish my work I turn off the imac and then again when they return to work and care, it can not connect to Time Capsule Airport, making it impossible to remove the files and make back up by Time Machine only works when I turn off and turn on the Airport Time Capsule , but I think this may end up with the unit. What can this happening and how to solve? Thank you.
Olá a todos, bom dia, desculpe meu inglês google, mas é a ferramenta que tenho no momento. Estou tendo dificuldades com a minha Airport Time Capsule, fiz todas as configurações de acordo com o manual, mas tem existido um problema de conexão com meu iMac. Quando termino meus trabalhos desligo o imac e depois quando retorno pra trabalhar novamente e ligo, ele não se conecta a Airport Time Capsule, impossibilitando retirar os arquivos e fazer o back-up pelo Time Machine, só funciona quando desligo e ligo a Airport Time Capsule, mas acho que isso pode acabar com o aparelho. O que pode esta acontecendo e como resolver? Obrigado.This is easier to do with pictures perhaps.. since we do not share a common language and machine translation leaves a lot to be desired.
In the airport utility bring up your Time Capsule.
Simply post the screenshots here.
So here is mine.
Click on the Edit button and give us the Internet and Wireless and Network tab..
eg.
Please also make sure you are set to ipv6 in your wireless or ethernet .. whichever is used.. and do tell which.
This is wifi in your computer.
The following are important..
DO not use long names with spaces and non-alphanumeric names.
Use short names, no spaces and pure alphanumeric.
eg TC name. TCgen5
Wireless name TCwifi
Use WPA2 Personal security with 10-20 character pure alphanumeric password.
read apple instructions to help with TM and TC.. they did finally admit it has issues in Mavericks.
OS X Mavericks: Time Machine problems
Mount the TC manually in finder.
AFP://TCgen5.local
When asked for the password .. that is the disk access password and save it in the keychain.
Reset Time Machine
See A4 here. http://pondini.org/TM/Troubleshooting.html -
I Don't have access to the previous computer on which i installed the photoshop, the m bord is broken and i have a new computer, how can i reinstall on my new comp' with my serial number?
You are allowed to have two machines with activated installations, so if you only had one installation, you still have the option to install on a second without doing anything further than that. If you originally downloaded the purchase thru Adobe then you might find a download link available in your Adobe account online. You can also download thru the following page if you can find your version:
Download and Installation Help -
https://helpx.adobe.com/download-install.html
You can have the first installation deactivated to free up the activation and have it available for another machine again as well. YOu need to contact Adobe Support thru chat for that. For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC ) -
Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8
Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
resetpassword
That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
I have a IPhone 5 and Iphone 5s, each phone is activited with a different service provider. Both are set up with the same account ID and running IOS 8.0.2. When the phones are connected to the same Wifi at home, both phones will ring when someone call in to one of the phone. Hence you do not know exactly which line the caller called. If you answered using the wrong phone, then anyone calling the other number will not get through. Anyway to solve this problem?
Hey David Koh TP,
Thanks for the question. It sounds like your devices are set up to use continuity together. Specifically, it sounds like you are signed into the same Apple ID in FaceTime, and have iPhone Cellular Calls enabled. To resolve your issue, simply disable this setting:
Connect your iPhone, iPad, and iPod touch using Continuity
http://support.apple.com/kb/HT6337
Turn off iPhone cellular calls
To turn off iPhone Cellular Calls on a device, go to Settings > FaceTime and turn off iPhone Cellular Calls.
Thanks,
Matt M. -
how do i transfer my purchases from one windows pc to another without having access to the pc with the music on it , as it is broken ?
on new pc - open itunes. sign into your account. go to settings. authorise the pc you are now using. go to account in itunes store. download purchases. simples.
Maybe you are looking for
-
Credit Check not occurring for Customer with Partial Credit limit existing
Hi, I have a scenario 1) where, if credit limit is crossed, then on creation of order I get an credit check even when i have not entered materials in sales order. 2) Partial Credit limit is pending (for e.g Credit limit of 100, 50 is still pending) w
-
Memory errors and software detection
I have the 645EMax2 and admittedly, have a power supply issue in the process of resolution. However, I have two 512mb ddr 333mhz memory sticks from Seitec. I did a scan with DocMemory and Memtest86. Both gave errors at 485mb. I swapped them round and
-
In Fusion Developer's Guide for Oracle Application Development Framework 11g Release 1 (11.1.1) documentation, in chapter 19.2.2 there is this phrase: "The task flow's bindings will only be refreshed based on its Refresh and RefreshCondition attribut
-
Light coming out of side of slider
Ive noticed that when the keypad light is on, there is a slight gap on the side of the slider which is letting light out. one side is fine but there is definetley a gap on the other. is there anyway this can be fixed, as obviously dust can get in and
-
Not Receiving Text Messages!! Help!!!
I just got the Note 3 after my iPhone fell in the toilet, thought I'd try something different. The problem? I AM NOT RECEIVING MANY OF MY TEXT MESSAGES!! Sorry for the all caps, but it is beyond frustrating. Its not just one text or from one person..