[SOLVED - workaround] surfraw 2.2.6-1 error: line 439 url : No suc...

Getting this on two machines, no config file has changed - I can't see anything different in the manual to say why it's suddenly broken.
I can get round it by adding the -browser option, so it's probably just that the script is not picking up the setting from the conf file. It *might* be to do with libetc.so being used, but the conf file can be found by other app (eg editors) so I'm assuming it can find it.
Obviously I can change my sr funcs to include the -browser, or I can try and debug the script and see why it's not picking up the setting, but I wondered if maybe someone else had fixed it already?
Last edited by skanky (2010-08-31 20:20:46)

I hope this thread isn't too old (it's still 2010) for me to post, but I am having the same issue, and I think it has to do with using libetc. If I copy my surfraw.conf into my home directly (or symlink it), surfraw works fine (for me, the error is on line 449). All my other programs are working fine with libetc, so I wonder why surfraw is having issues.

Similar Messages

Hello, I come to update the iTunes software it shows me an error 20 How do I solve this After I was once an error 13 appears. And that's just Mac Air. I would like to get an answer because it annoys me that it happens ...! Nimrod

Hello,
I come to update the iTunes software it shows me an error 20 How do I solve this After I was once an error 13 appears.
And that's just Mac Air. I would like to get an answer because it annoys me that it happens ...!
Nimrod

Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

Undocumented problem solved with 16-bit pcmcia and irq error

I am having the exact same problem as described in the following post:
"Undocumented problem solved with 16-bit pcmcia and irq error."
"I'm using a DAQ Card (AI-16E-4), which didn't work properly in MAX. MAX complained that the card didn't respond to an interrupt request.
I've had this issue for a while, but dropped it, since NI support told me nothing could be done about it. Meanwhile, a seemingly unrelated problem with a wireless pcmcia network card arose. Cisco had no clue what was wrong with their card either, but I found Microsoft Knowledge Base Article Q327947. It seems that Win2k (they claim SP3 and up) disables ISA to PCI routing, which is what causes this problem.
To fix it, open regedit
and navigate to "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\Pcmcia\Parameters"
edit or create the DWORD value "DisableIsaToPciRouting" and set the value data to 0.
See Microsoft's article for further details: http://support.microsoft.com/default. aspx?scid=kb;en-us;327947"
The difference is that I am using WinXP and the Regedit fix does not solve the problem. Does anybody know how he was able to continue to use the card before he solved the problem? The card works fine in MAX, but errors out in LabVIEW.

Hey Willy,
Here some additional suggestions that have corrected some PCMCIA difficulties in the past besides the registry edit you suggested.
1. General Troubleshooting to Verify Correct Hardware and Software Installation
Uninstall the PC Card hardware through Device Manager
Remove the PC Card from the laptop
Uninstall the NI-DAQ software
Follow the normal installation instructions (the most important step to remember for Plug-n-Play Operating Systems is to install the software first)
Try the latest service packs for Win 2000 or Win XP
Try the PC Card in a different laptop
Try a different slot in the laptop. On certain laptops PC Cards have been successfully installed in the top PCMCIA slot instead of the bottom.
2. Additional Troubleshootin
g for PC Cards that Return IRQ Conflicts
For E-Series DAQCards:
Update to NI-DAQ 6.9.3 first and then update NI-PAL to version 1.6.1 (included exe file).
Download the attached NI-PAL (ni-cdu1610.exe), and run the installer. When receiving the error "The device is not responding to the first IRQ Level" in Measurement and Automation Explorer, try this method of upgrading NI-PAL
3. Additional Troubleshooting Steps
Try disabling the 3COM adapter, and any other extraneous (for now) devices like any built in serial and parallel ports. The best way to do this is probably to disable them in the BIOS. If the PCMCIA card works properly then try to reconfigure disabled devices one at a time.
Make sure the latest BIOS is installed.
Check for any unusual PCMCIA drivers or other software that might interfere with the PCMCIA driver.
I hope this helps.
Ron
Applications Engineering
National Instruments
Attachments:
ni-cdu1610.exe ‏1557 KB

Error opening file/URL reference by alias and Administrative limit exceeded

Hello All,
Problem:
SMTP Error: 4.5.0 error opening file/URL reference by alias
and
Search failed with: netscape.ldap.LDAPException: error result (11); Administrative limit exceeded
Here is my configuration:
Windows 2000 server (without Active Directory)
SP4
Iplanet Messaging Server 5.2
Netscape Directory Server 4.16
IPlanet Messaging Server 5.2 Hotfix 1.09 (built Jan 7 2003)
We have a group which we use to flash messages to all the users of the mail server. Till last week it was working fine but now I am not able to send messages to this group <group-name>.
There are around 800 (Eight Hundred) E-mail id the messaging server and the flashed message is supposed to go to all 800 + users.
Note: I have another group of 300 users and I am able to send an E-mail to this group of 300 users.
I am using Dynamic Group for Members list.
The error message I get while trying to send message to this group is
SMTP Error: 4.5.0 error opening file/URL reference by alias.
The corresponding error in mail.log file is
30-Jan-2004 10:55:21.40 41c.7e4.1098 tcp_intranet J 0 <group-name>@domain rfc822; <group-name>@domain domain (localhost [127.0.0.1]) 452 4.5.0 error opening file/URL referenced by alias: <group-name>@domain
Now when I construct and Test the LDAP URL from Console, the error I get is:
Search failed with: netscape.ldap.LDAPException: error result (11); Administrative limit exceeded
I have increased the various limits but I still get the same error when I send mail to that group or do a LDAP Test:
The deafult and new limits are:
Sizelimit: Default 2000 New 10000
Timelimit Default 3600 New 3600
Lookthroughlimit Default 5000 New 6000
The corresponding error entry in access log of slapd is:
30/Jan/2004:12:19:26 +051800] conn=34 op=213 RESULT err=11 tag=101 nentries=0 etime=2 notes=U
My search for Administrative limit problem and error opening file/URL error in Sun forum and other groups did get some hits but that did not solve my problem.
I will appreciate any suggestion/comments.
Thanks and Regards,
Maneesh Bisht

Thanks Jay.
My problem has been fixed.
Your suggestion was to increase the lookthrough limit. As you would have noticed in my posting that I had increased this limit to 6000 but that did not solve my problem. Today I increased this limit to 10000. And after that I did not get "administrative limit exceeded" error. Also I do not get "error opening file/URL reference by alias" error while sending E-mail to a particular group of 800+ ids.
Regards,
Maneesh Bisht

Error: The requested URL was not found, or cannot be served at this time.

Hi gurus,
I have a report that has a parameter file. When I call the report the parameter form is displayed but after I enter the parameter values and click SUBMIT QUERY, I receive this error:
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - Reports Server name is not specified.
If I run the report without parameter file it runs fine.
Does anyone have an idea on how I can make this work.
Thanks

* Can you please tell what version of Reports you are using ie 6i or 9i and the exact version [ In builder give Help->About] . In this problem we cannot deduce anything from the version. But if it is very old, we can recommend installing the latest patch.
* Please post the full command line request. If you have used any keys in cgicmd.dat , please post the expansion of that keys also.
* If possible as a workaround give paramform=no&paramName=paramValue ... in request till this problem is resolved.
Thanks
The Oracle Reports Team

Script error line 2053 the specified module could not be found URL res://ieframe.dll/preview.js

Script error line 2053 the specified module could not be found URL res://ieframe.dll/preview.js

The issue is caused when Windows creates the printer profile in the control panel that it doesn't correctly create it with the drivers.
We're not going to completely uninstall all the HP software, instead we're going to remove the corrupt Windows printer profile and reinstall it. Total time for this on an average computer is about 5-10 minutes to completely repair (including reboot).
1) Navigate to Start Menu > Devices and Printers or Start Menu > Control Panel > Printers
2) Select each printer profile for the printer with an issue, then select remove device/printer.
3) Reboot
4) Navigate to Start Menu > All Programs > HP > insert model # here > Add Printer (or Setup Wizard)
5) Follow the setup prompts to reinstall the printer profile and it recreates the Windows printer.
6) Run the HP Update Tool from Start Menu > All Programs > HP if your printer installs it, rebooting afterwards if necessary.
7) Test by printing google.com (uses very little ink when the test page comes out).
Let me know if you have any questions or issues.
Thanks,
Dan
I work for an internation tech company and personally perform thousands of computer repairs a year. I'm based out of the US working for a US company, and have been working on computers for over 13 years.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Problem with Home Sharing. Getting the error "The Requested URL was not Found on this Server"

I recently purchased an iPhone 5. As I do with all of my AppleTVs, iPads, iPods and an iPhone 4 in my home, I connected the 5 to my home network and accessed the shared video library using home sharing. My iTunes library is roughly 85% iTunes purchases, a handful of videos taken with iOS devices, and some video ripped with Handbrake. All of these videos work fine on all devices in my home except my new iPhone 5. When I access the shared video library on my iPhone 5, all of the textual data for all of the videos appears, however, I can only get the iPhone to play 1 video of the dozens in my iTunes library. When I try to play any other, I get the error, "The Requested URL was not Found on this Server."
Interestingly, only one video in my entire shared library displays the artwork associated with it in my iTunes library on my iPhone 5, and that's the one I can stream without a problem. Even more interestingly, that video I am able to stream was ripped using Handbrake (there are a number in my library ripped using Handbrake, but just this one will stream to my iPhone 5 for some reason).
I'm using the latest version of iTunes (10.7) on my home (iMac) computer (running OSX 10.8.2- Mountain Lion)and of course iOS 6 on the iPhone 5. I've tried resetting my iPhone several times as well as restarting my iMac which holds my iTunes library.
Does anyone have any ideas as to what's going on?

Can you see if you can view index page from a browser on iPhone.
Have you seen live streams working from a different computer...
if not then check if a proper crossdomain.xml file in its place(webroot folder).

After uprading to iOS 5.1 I can no longer play videos in my camera roll. I just get the following error "The requested URL was not found on this server"

After uprading to iOS 5.1 I can no longer play videos in my camera roll. I just get the following error "The requested URL was not found on this server".
Anyone have any ideas?

You have two choices to try & fix this: 1. Backup your phone, then restore as a new device, then restore from the backup you first created, or 2. Follow the advise from this poster:
I had the same problem with the black blocks after upgrading to iOS4 on my iPhone. The reason for the black blocks is that the thumbnail images for those particular images have not been created when the Photo Library has been updated to iOS4. I followed the advice on a couple of blogs and fixed the problem.
1. I downloaded iPhone Explorer free software (http://www.macroplant.com/iphoneexplorer/) so I could view the photo data folders on my phone. I could see that the thumbnail images were missing.
2. I followed a slight variation on the instructions on this blog. (http://blog.mbentley.net/2010/06/iphone-ios-4-upgrade-restore-lost-pictures-in-c amera-roll/)
3. First I copied the Photo Data folder by dragging it from the iPhone Explorer window to my Mac desktop.
4. Through iPhone Explorer I deleted the info.plist file in the Media/PhotoData/MISC folder.
5. I also deleted the Photos.sqlite and PhotosAux.sqlite files in Media/PhotoData.
6. I then rebooted the phone and launched the Photo Library.
7. The Library rebuilt it's self again and recreated the thumbnails.
8. The problem was fixed!!! Thank you M Bentley!
I hope this helps - this has been bugging me for 2 weeks.
Regards
Alijm23

HP Officejet Pro 8500 909g Windows 7 64 bit Scrip error line 2115

When printing from the laptop I get a message
Script error
Line 2115
Char l
error-- unspecified error
Code 0
Url res:/ieframe.dll/prview.is

Hello GayeLake and Beer,
I believe the answer(s) to this issue can be found HERE.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Private Browsing function is suddenly not working. Error message :"The URL is not valid and cannot be loaded." How can I repair?

Private Browsing function is suddenly not working. Error message :"The URL is not valid and cannot be loaded."
How can I fix it?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

I am getting this error message, " The URL is not valid and cannot be loaded" when I try to go to Firefox home. I have uninstalled add-ons, uninstaleed and reinstalled a fresh new firefox which did not help

I am getting the following error message, " The URL is not valid and cannot be loaded" when I try to go to firefox home. I uninstalled add-ons , uninstalled Firefox and then installed a fresh version. Still have the problem.
Thanks for the help

That issue can be caused by a corrupted or incomplete Visual C++ installation (multiple versions can be installed side-by-side; SxS) that is missing some runtime components (Redistributable Packages) that Firefox depends on (problem with an embedded manifest file that specifies a specific runtime version).
You need to install the missing components (e.g. VisualC++ 2005 Redistrbutable).
* https://www.microsoft.com/download/en/details.aspx?id=5638
*[[/questions/908165]] The URL is not valid and cannot be loaded
*[https://bugzilla.mozilla.org/show_bug.cgi?id=713167 bug 713167] - Microsoft.VC80.CRT SideBySide errors, browsercomps.dll

Netflix viewed perfect for over a month, then it didn't with this error msge: Invalid URL The requested URL "/home", is invalid. Reference #9.9d0bc841.1320231048.92bcc44 --What's up with this now?

Been watching Netflix on my Verizon HP Notebook, it's less than 3mo old. runs windows xp...pretty standard stuff. Anyway tried to login to netflix and Firefox gave this error message--Invalid URL
The requested URL "/home", is invalid. Reference #9.9d0bc841.1320231048.92bcc44 -- I called Netflix & there system running perfectly. My pc running perfectly as well. Logged into netflix using IE--worked just fine. So by process of elimination, it's Firefox's Problem! I have NO CLUE about it, never seen it before on ANY browser. Tried opening & closing FFx, restarting puter, etc...Don't know what else to tell you except Firefox works on every other website now EXCEPT NETFLIX, it's the darnedest (I know that's not a word LOL) I've seen--it happened 10/2/11 @ about 3am!

As I understand:
The procedure works.
The link 'appears' to work. (ie you saw the procedure run a 2nd at the database level)
But it doesn't actually work (because you get a 404)
I think I ran into an issue, on a completely different page type, that produced an 'error 404'. (I can't seem to reproduce it, though)
The only way I discovered what was really going on was with an HTTP sniffer. (eg HTTPFox for FireFox)
Through that, I noticed that the browser was (for some reason) calling a completely non-sensible APEX page. (hence the PAGE NOT FOUND error)
My solution was to add a "submit to self" branch point.
If that doesn't work, I'm at a loss.
MK

I updated my iPhone 3GS on iOS 5.1 everything is ok but when I tap a message in notification area a SMS error comes "This URL wasn't loaded: sms:/open?groupid=1." and when i tap on messages app open and then close certainly... Please anyone helpe me......

I updated my iPhone 3GS on iOS 5.1 everything is ok but when I tap a message in notification area a SMS error comes "This URL wasn't loaded: sms:/open?groupid=1." and when i tap on messages app open and then close certainly... Please anyone helpe me......

Forgot to mention I live in Peru Southamerica, the cell provider is Claro (America Moviles).

Dbms_xmlsave Error line 65

We are passing a clob to dbms_xmlsave.insertxml successfully for all XML clobs under .5 megs but once we go over that size the Error line 65 "Invalid arguments encountered processing ROW ELEMENT 0 show up. Is this a size limitation for dbms_xmlsave? Is there an approach that can handle clobs over .5 meg?

Looks like XDB is not installed. You can verify this by doing desc RESOURCE_VIEW. If RESOURCE_VIEW does not exist then you need to install XDB to install the dbms_xmlstore() package
You need to run the script catqm in $ORACLE_HOME/rdbms/admin. This will add the DBMS_XMLSTORE package. catqm takes 3 arguments. The XDB password, typically XDB, the tablespace to be used for the XDB repository and the name of the temporay tablespace to be used by XDB. Once this has been run DBMS_XMLSTORE() should be there.
Once XDB has been installed you should get the following:
SQL> desc dbms_xmlstore
PROCEDURE CLEARKEYCOLUMNLIST
Argument Name                  Type                    In/Out Default?
CTXHDL                         NUMBER                  IN
PROCEDURE CLEARUPDATECOLUMNLIST
Argument Name                  Type                    In/Out Default?
CTXHDL                         NUMBER                  IN
PROCEDURE CLOSECONTEXT
Argument Name                  Type                    In/Out Default?
CTXHDL                         NUMBER                  IN
FUNCTION DELETEXML RETURNS NUMBER
Argument Name                  Type                    In/Out Default?
CTXHDL                         NUMBER                  IN
XDOC                           VARCHAR2                IN
FUNCTION DELETEXML RETURNS NUMBER
Argument Name                  Type                    In/Out Default?
CTXHDL                         NUMBER                  IN
XDOC                           CLOB                    IN
FUNCTION DELETEXML RETURNS NUMBER
Argument Name                  Type                    In/Out Default?
CTXHDL                         NUMBER                  IN
XDOC                           XMLTYPE                 IN
FUNCTION INSERTXML RETURNS NUMBER
Argument Name                  Type                    In/Out Default?
CTXHDL                         NUMBER                  IN
XDOC                           VARCHAR2                IN
FUNCTION INSERTXML RETURNS NUMBER
Argument Name                  Type                    In/Out Default?
CTXHDL                         NUMBER                  IN
XDOC                           CLOB                    IN
FUNCTION INSERTXML RETURNS NUMBER
Argument Name                  Type                    In/Out Default?
CTXHDL                         NUMBER                  IN
XDOC                           XMLTYPE                 IN
FUNCTION NEWCONTEXT RETURNS NUMBER
Argument Name                  Type                    In/Out Default?
TARGETTABLE                    VARCHAR2                IN
PROCEDURE SETKEYCOLUMN
Argument Name                  Type                    In/Out Default?
CTXHDL                         NUMBER                  IN
COLNAME                        VARCHAR2                IN
PROCEDURE SETROWTAG
Argument Name                  Type                    In/Out Default?
CTX                            NUMBER                  IN
ROWTAGNAME                     VARCHAR2                IN
PROCEDURE SETUPDATECOLUMN
Argument Name                  Type                    In/Out Default?
CTXHDL                         NUMBER                  IN
COLNAME                        VARCHAR2                IN
FUNCTION UPDATEXML RETURNS NUMBER
Argument Name                  Type                    In/Out Default?
CTXHDL                         NUMBER                  IN
XDOC                           VARCHAR2                IN
FUNCTION UPDATEXML RETURNS NUMBER
Argument Name                  Type                    In/Out Default?
CTXHDL                         NUMBER                  IN
XDOC                           CLOB                    IN
FUNCTION UPDATEXML RETURNS NUMBER
Argument Name                  Type                    In/Out Default?
CTXHDL                         NUMBER                  IN
XDOC                           XMLTYPE                 IN
SQL>
Message was edited by:
mdrake

How to avoid output file and error lines when condition does not match

Hi Experts
A customer want to send purchase order files to several vendors and each vendor has their own requirement to content and file format. I have prepared scenarios for each vendor and a template is (conditionally) called when CardCode matches. It works fine, - PO file is generated when CardCode matches, but error lines are written to SAP B1 Control Center each time CardCode does not match the one defined in a scenario (100 or more times per day). Problem is that these error lines does not get automatic deleted. Conditional processing are made in this way:
Result Message in SAP B1 Control Center when CardCode does not match:
I tried to avoid an error line in SAP B1 Control Center when CardCode does not match in this way:
Then no error lines are written to SAP B1 Control Center, but an output file is generated each time (order file when CardCode matches and an empty file when CardCode does not match).
Any suggestions on how to avoid both errors types (error lines in SAP B1 Control Center and empty output files)?
Or - can lines in SAP B1 Control Center be automatic deleted?
Regards
Steen

Hi Steen,
using <b1im_skip> should be the right approach, if you're working with B1 OUTBOUND.
Following extract form the B1i help describes the usage to skip the outbound processing:
1.1 Skipping Outbound Processing
If you do not want to hand over the message to the receiver system, the scenario step can create a special tag that indicates to generic processing in the integration framework to skip the message processing.
Add the following to the final transformation atom (atom0):
<b1im_skip xmlns= ”” info=”my info” msglog=”true” msgout="yes">
If the integration framework skips the message, it puts the message log information to the Filtered section, if the message log is switched on. The result message contains the Message skipped by vBIU logic information.
info
To display an individual message, define it using the info attribute.
msglog
If you want to avoid an entry in the message log, introduce the msglog attribute and set it to false.
msgout
To display the skip information in the Success section of the message log, use the msgout attribute and set it to yes.
In case you don't want any MsgLogEntry in case of a skipped message, please enter the following in final atom0:
<xsl:template name="transform">
<xsl:attribute name="pltype">xml</xsl:attribute>
<xsl:choose>
<xsl:when test="$msg/BOM/BO/Documents/row/CardCode='C20000'">
<xsl:call-template name="transform2"/>
</xsl:when>
<xsl:otherwise>
<b1im_skip info="skipped" msglog="false"/>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
Best regards
Bastian

[SOLVED - workaround] surfraw 2.2.6-1 error: line 439 url : No suc...

Similar Messages

Maybe you are looking for