(Solved) Workflow System Verification Step 4: workitem could not be created

Hello all
We're on R/3 4.7 and I'm trying to get workflow runtime environment up and running. I've already passed through the automatic customizing (SWU3), all is green!
When starting the verification workflow I get a mail in my SAP Workplace inbox telling me something about error WL 410.
In the workflow log I can see this (had to translate it from german, so please bare with me if wording in english is not absolutely correct):
green -> Start event received
green -> (sub-)workflow created
green -> workflow started
green -> SWW_WI_ERROR_MESSAGE_SEND_S
red   -> Callback vom Workitem ausgeführt
red   -> GET_DEADLINE
red   -> SWW_WI_STATUS_CHANGE
Clicking on the first red light pops up a message telling me something like that:
Workflow 'Workflow-System-Verification' Step n° 4: Workitem could not be created
The long text message of this and the workflow protocol tells nothing more.
Anyone out there able to help me on this issue?
Kind regards,
Renaud

Hello Alan
Yes, this nearly made me crazy. Posted a customer message to SAP concerning this in parallel last week and also sent them some screenshots. They also advised me to move unit H from (non standard) dimensionless to dimension "time". This corrected it as already mentioned before.
I did several workflow activations before and never had any problems with automatic customizing and the verification workflow... until I came across this system here. Also on all other systems known to me the unit H was never dimensionless. Double checked it last week as well. Probably someone else fiddled around in CUNI without knowing what he or she was doing? Will probably never find it out. I just hope that this was an exception! Else...
Some extra points would be great of course )
Thanks and kind regards,
Renaud

Similar Messages

SWU3 'Auto Workflow Cust.' and 'Workflow-System-Verification'

Hey all,
I am totally new to workflow. We have just installed SRM, sandbox client. Have been follofing through some of the topics in the forum
Do i need to perform these activities as a post installation step before I start doing anything on workflow?
SWU3 'Auto Workflow Cust.
'Workflow-System-Verification'

Hi,
I think for just setting up workflow environment, you will just need SWU3.
Once this customizing activity is done, verify it using Star Verification workflow.
For information on SRM related workflow, check out following link :
http://help.sap.com/saphelp_srm50/helpdata/en/58/c14e3c59bfe747e10000000a11402f/frameset.htm
Hope it helps you to start off..
Regards,
Akshay
Note: Some points would be nice if this helps:)

DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found.

Hello Everyone,
We are getting an error while trying to create an Universe via Microsoft -> MS Analysis Services 2014 -> OLEDB for OLAP Provider under Connection in UDT -"DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found." We have installed BI 4.1 SP05 in our system. As per earlier posts in scn in BO XI 3.x this issue used to be for improper installation of Integration KIT but in our scenarion Integration KIT is within the BO 4.1 package so no seperate installation is required. Moreover I have checked whether all the driver is present under file: "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer\drivers" and seems everything is fine. But still I am getting this error. One important point is we could use IDT because in IDT still we don't have option to connect with 'Microsoft Analysis Services - 2014 (XMLA)' as we are using Microsoft Analysis Services 2014 version.
Kindly help if anyone has faced the same problem with SAP BO 4.1.
Thanks and Best Regards,
Ghosal

Hello Everybody,
The problem is solved now after installing "OLEDB drivers from SQL Server 2012 Feature Pack". We had OLEDB drivers that comes directly from SQL Server but that did not worked out in our case.
Thanks for your support.
Best Regards,
Ghosal

L755-S5244 - W7 system repair disc could not be created... unable to parse... XML data. (0x800705B9)

After creating a backup image of my W7 Toshiba laptop OK, the last step was the option to create a system repair disc. However that returned the following error:
System repair disc could not be created
Windows was unable to parse the requested XML data.
(0x800705B9)
Note this is *not* the same as "system recovery discs"! I already have a set of those discs which work OK.. What I need is a system repair disc which allows booting into special recovery mode to repair W7, to restore a backup image, etc.
Note that my computer is working fine. I just need to be able to make a system repair disc in case there are future problems. There always are, eventually.
In googling this problem, there are many reports of this error but no clear solution. Some of the reported fixes refer to microsoft help/support/social/technet links which no longer exist. I tried one of those suggestions, SFC /SCANNOW, which didn't find any system file errors on my computer. So that's not the cause.
It may have something to do with the OEM W7 version which Toshiba puts on its laptops such as my L755-S5244(?). It's possible that Toshiba has intentionally or accidentally disabled the normal commands to make a system repair disc in W7. Does anybody know for sure?
Thanks.

I did a fair amount of goggling and reading, then... I tried 3 different downloadable boot disks from maximumpcguides.com, spirebyte, and mydigitallife.info. They all work exactly the same. When booting from one of those discs, there are 5 options offered. I had to make text notes (below) because there's no way to make screen images in repair mode.
1) Startup Repair - apparently works OK, at least it went through the process and found no errors. That's as it should be, because this computer is working fine! My only objective here is to find out what can be done someday when it malfunctions, as all computers do eventually..
2) System Restore - doesn't work
big red X: "To use System Restore, you must specify which Windows installation to restore. Restart this computer, select an operating system, and then select System Restore." That makes no sense because I only have one Windows installation! This is an important option. Is there any way to access it when Windows 7 won't start normally?
3) System Image Recovery - It found the image file I had created previously. But I didn't want to risk it on a properly functioning computer (no reason). So I don't know if it will actually work right... someday when I really need it.
4) Windows Memory Diagnostic - doesn't work
"Windows cannot check for memory problems. An error is preventing Windows from checking for memory problems during startup. To run the Windows Memory Diagnostic manually, boot the computer from the Windows installation disc, and then select Windows Memory Diagnostic from the Windows Boot Manager menu." However there is no such thing as a Windows installation disc on Toshiba OEM W7. Or is there? Also, I can get to Windows Boot Manager by pressing f8 during startup then select Repair Your Computer, but it won't do anything. Again, it requests the Windows installation disc, which I don't have. Then at the end of all the verbiage... "... Status 0xc000000e; Info: The boot selection failed because a required device is inaccessible." It would be nice to run a good memory diagnostic because I just upgraded from 4G to 8G RAM. Suggestions?
5) Command Prompt - apparently works OK, at least it listed the directory when I entered "dir".
I feel that chances would be better if I could somehow get this W7 Toshiba laptop to make its own system repair disc, which goes full circle back to my original query... Can it be fixed to avoid the parse XML data error?

HT201269 When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a serve

When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a server error. Have no clue what to do... I've restarted the iPad and get the same message. But my internet works just fine.

1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

RFC destination BW could not be created in the source system R3073

I'm creating a source system for our BW (version 7.0) dev client.I'm linking it to our R/3 4.7 QA client. From RSA1 I select create source system, I enter the system information and in the next screen I'm prompted to log on as system administrator. I'm in QA now and the system automatically crated the RFC connection. I test the connection and it runs ok. I log on to the BW client from QA and it logs on just fine. When I exit the screen I get the following message:
RFC destination BW could not be created in the source system message number R3073
Why is this happening? The connection tests just fine.
I'm using RFCREMOTE user in BW and ALEREMOTE in QA with the same password
Any ideas?
thanks

Hi,
I cannot tell you surely the settings for SCC4 now (I can't connect to my sys).
Nevertheless, create your R3QA RFCDEST manually in your BWDEV with SM59.
Create your BWDEV RFCDEST manually in your BWQA .
Perform test and authorization test within SM59 from both sys.
When creating the source system in BW the system will detect the RFC and ask you if you want to use it; accept an proceed the the rest of the procedure.
hope this helps...
Olivier.

RFC destination BW could not be created in the source system

Hi,
Recently I installed BI 7.0 on Win 2003 and try to create a SAP system in RSA1.
I try to connect R/3 system (on UNIX) and getting RFC connection error u201CRFC user logon failed. Check the connection.u201D & u201CRFC destination BW could not be created in the source systemu201D. However, I test the connection and it is working fine.
Please suggest the solution.
Regards,
Rajesh

Rajesh,
Answer is very simple. I did get same kind of problem. It is very simple answer depending on your R3 version.
Use password all capital letters. Don't include any small letter at all. unlock your user id and change password to capital letter. BW doesn't like small and capital letter mix. this bug is fixed in ECC 6.0
<removed_by_moderator>
*Do not ask for points
Read the "Rules of Engagement"
Regards
RK
Edited by: Juan Reyes on May 21, 2009 9:30 AM

HT201413 May I know how to solve this problem "iPhone software update server could not be contacted or is temporarily unavailable"

May I know how to solve this problem "iPhone software update server could not be contacted or is temporarily unavailable"
Thank you.

Let's try the following document with that one.
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
(If the "Automatically detect settings" checkbox is already checked, try unchecking and rechecking it and clicking OK.)

Re: how do I solve this alert-The photo "evaluation.jpeg" could not be opened, because the original item cannot be found.

Re: how do I solve this alert-The photo “evaluation.jpeg” could not be opened, because the original item cannot be found. How do I get rid of the alert so that every time I open iphoto or sync my iphone it will not come up anymore.
Thanks

The issue is with iPhoto. When it opens it is looking for a photo that either no longer exists or is misplaced. I would post I the iPhoto forum where those experts are.

How do I solve this alert-The photo "evaluation.jpeg" could not be opened, because the original item cannot be found.

it happened when I did an update on the iphoto
how do I solve this
alert-The photo “evaluation.jpeg” could not be opened, because the original item cannot be found.

The issue is with iPhoto. When it opens it is looking for a photo that either no longer exists or is misplaced. I would post I the iPhoto forum where those experts are.

Have followed the steps but still could not convert my Pdf to Word

Have followed the steps but still could not convert Pdf to Word

You need to update it from iTunes on a computer.
(73555)

COREid Federation Error: A local user session could not be created for the

Hi,
I installed two instances of COREid Federation in my machine. Also installed SiteMinder and LDAP. Source Domain of COREid (8101) uses LDAP as IdMBridge and Destination Domain (9101) uses SiteMinder as IdMBridge. I am trying to access the resource protected by the SiteMinder from the source domain using the URL which is constructed using the pattern given in the PDF:
http://mymachine.domain.com:8101/shareid/saml/ObSAMLTransferService?DOMAIN=DestinationDomain&method=POST&TARGET=http://mymachine.domain.com:8887/Source/Source.html
Assertions are generated and I can see the assertion in the Source domain and transferred to the Destination Domain.
I get the following error in the Destination Domain Shareid Log file:
ERROR - [http10113-Processor3] - RECEIVER: ERROR: A local user session could not be created for the assertion
Please help me to solve this issue?
Note: The Web agent runs on the web server instance 8887.
SiteMinder is able to protect the resource when accessed.

Typically that error occurs when the destinations access management system can't find the user based on the SAML attribute. Check to make sure that the attribute that you are matching on matches exactly.

RFC Destination could not be created in TREX administration tool

Hi All,
Recently i installed the TREX server, I am trying to connect the ABAP system with the RFC connection. I entered all necessary data for the RFC connection it giving error as
RFC Destination could not be created.
To solve the above problem i created one RFC connection of type TCP/IP in ABAP server eventhough it is not solved.
Can i have the solution for the above problem?
Regards,
Vivek.

Hi Michale,
Thanks for your quick response; I tried all the mentioned possibilities in that help document, still i am facing the same problem.
It is giving the below error
Connect to SAP System failed.Possible reasons:
-Logon data incorrect
-Password is not uppercase(must also be uppercase)
-SAP system user locked
-SAP user not in specified client
-SAP User rights are insufficient
-SAP system not reachable
-saprfc.ini unavailable or entries incorrect
-TREXTcpipClient.ini section[communication],parameters rfcdestination, sapsystem not set
-SAP system Basis component below 6.20 or SP too low
-->check also latest TREXTcpiplient trace file entries.*
The above all are check by me everything is fine.
The below information from the saprfc.ini file
DEST=NPI
TYPE=B
MSHOST=server1
GROUP=server1_group*.
Is there any mistake, please let me know.
Regards,
Vivek.

PARCONV phase Index could not be created ERROR

Upgrading Solution Manger 3.2 to 7.0 Windows Nt SQL Server 2000
We are in teh PARCONV phase now and getting errors regarding tables with missing indexes.
Example from PARCONV.ELG file:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CONVERSION ERRORS and RETURN CODE in NCONV00.TS3
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EEGT236 The SQL statement was not executed
2EEDI006 Index " " could not be created completely in the database
Long text:
    Cause
      It was not possible to create the index in the database.
      This could be caused by the fact that an index with the same name
      exists in the database, but it is unknown to the ABAP/4 Dictionary.
      Activating the index in the ABAP/4 Dictionary is possible, but it is
      not possible to create it in the database.
    System Response
    What to do
      For more information about the cause of the error, analyze the SQL
      error messages in this log.
2EEGT221 Creation of secondary indexes for table "BBP_PDHGP" failed
Long text:
    Cause
      There might be a SQL error.
    System Response
    What to do
      Check the SQL codes for errors.
2EEGT239 Error in step "BBP_PDHGP-STEP6"
2EEGT094 Conversion could not be restarted
Long text:
    Cause
      The conversion could not be restarted, i.e. it was not possible to
      continue the conversion at the point where it was interrupted.
    System Response
    What to do
      Information about the cause of the error can be found in the restart
      log.
2EEGT236 The SQL statement was not executed
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I have gone into se14 the index name exists but the index doesn't exist on the database. I've tried using the Create to create teh index on the databse but that fails with a name may already exist.
How to I clear these errors?
Thanks
Laurie McGinley

It appears on all the ABAP Dictionary: Restart Log List, that the same error is occuring on creating the secondary indexes...
Database error 170 at EXE
Line 1: incorrect syntax near '('
Same error occurs if I use the SE14 to "Continue Adjustment".
Note 1180553 u2013 Syntax error 170 during index creation on SQL 2000 and
Note 1346662 u2013 Avoid index creation errors in 7.0 EHP and higher upgrades.
Note 1365755 - Scripts to fix fillfactor issues on SQLServer 2000
These seem to be the key.... but...
I ran the scripts in 1180553 ... no change in the errors. In fact, there isn't a dbo.[TATAF~] table and the dbo.[TATAF] table doesn't have the 'With fillfactor" entry. So i wonder if I'm at a different phase?
I'm looking at 1365755 and think I'd like to give that one a try, but it says to unpack the ZIP file in the <upgr dir>\abap\bin directory. Well there isn't one. I have the upgrade dir \usr\sap\put and its subdirectories, but no \abap\bin dir.
So I'm not sure where to unpack this to give it a try.
Perhaps it would be better to go back to teh beginning of the UPGRADE (after PREPARE) and start again?
I didn't upgrade to SQL Server 2005 because the version of SolMan we are on isn't certified on it, so thought I'd get through the Sol Man upgrade then do SQLServer 2005... maybe need to rethink this to?
I'm open you suggesions, ideas, answers!
Thanks
Laurie McGinley
Edited by: Laurie McGinley on Sep 28, 2009 12:23 PM

Even after resets get "The backup disk image "/Volumes/FreeAgent GoFlex Drive/MacBeth (2) 1.sparsebundle" could not be created (error 22)."

HELP! "The backup disk image “/Volumes/FreeAgent GoFlex Drive/MacBeth (2) 1.sparsebundle” could not be created (error 22)."
TC estimates over 750GB for full backup.
Late 2010 MBA is connected wirelessly to
802.11n (1st gen) TC that is connected via ethernet hub built into house to motorola router using charter.com for internet.
I have had same problem for over 150 days and multiple reboots, restarts in proper order, firmware updates, unplugs with 5min plus gaps, bypassing the tc and using external 500gb WD mybook via usb to time capsule, replacement of the WD mybook to new 2TB Free Agent GoFlex drive, etc, etc, etc! Note: I originally named my MBA hard drive MacBeth, but at some point months ago, it said backup already existed and system automatically created MacBeth (2), worked for a while, then stopped again, despite trying nearly daily.
I gave up and started using Carbon Copy Clone daily for just the 128gb on internal SSD of my late 2011 11" MacBook Air, but need to get past these time capsule errors to back up the external disk! Due to lack of space in MBA, I had long ago transferred both itunes and iphoto and all imovie/fcpx files to a 1tb external disk (WD Passport) that I keep in my bag with MBA. It is partitioned with 150gb for cloning the MBA, and over 750gb for media/itunes/iphoto/etc.
Also, I have endured months of "your hard drive is full" messages and system lockups, applying the solution given to me by genious bar (deleting all aol.com outboxes/recovered messages/spam/trash under library/mail/V2/Mailboxes folders, empty trash, restart....watch recovered hard drive space mysteriously shrink next couple days to zero.....repeat)
Due to lack of space, I had not been able to do javascript and other system updates. Yesterday, I noticed even safari bookmark bar had mysteriously emptied (not disappeared, I can hide and show the space where the bar used to be - it is just blank area with no data except for eyelass-book-topsites icons), so I transferred a few large quicktime movie files recorded with isight camera to the external disk, and freed up 20 gbs for the first time!
This got my hopes up yesterday because after I completed all system/software updates, suddenly the bookmark bar showed up and I was able to start the time capsule backup! It took overnight preparing for backup, but finally started and progressed to 12gb of the 100gb+ needed (i guess the update where it left off months ago for the estimated 750gb for the full backup?), then I put system to sleep and took it with me (thus leaving the wireless time capsule network as I do daily fully expecting it to continue when I returned home in the evening.) But alas, upon return, back to the "Time Machine could not complete backup, The backup disk image ".....sparsebundle" could not be created (error 22)" Ugh! More reboots, unplugs, 5min gaps....still Ugh!
So the problem continues...please help! Here are my settings:
About this mac:
Mac OS X V. 10.7.5
processor 1.6 ghz intel core 2 duo, memory 4 4g 1067 MHz DDR3
software up to date!
Airport Utility:
V 6.2 (620.33)
both internet globe and TC show green dots in graphic, however internet occasionally shows yellow then goes to green, but still gets error 22. Suddenly TC showed explanation mark and says lost connection and asked if I wanted to 'forget', gave same errors, then mysteriously went back to green, but still got error 22!.
Internet:
connection: connected, displays router address, 2 dns server, and domain name: charter.com
Time Capsule:
shows network, ip address, serial number, version 7.6.3, status: (green dot) Setup over WAN,
wireless clients: phones, macbooks (including this MBA), printers, wii
If you need other settings to help me, just ask! I have read a few of the other solutions in forums, but trying not to erase disks, especially since it worked for a minute yesterday!

To step sideways.. why not just use CCC to backup the 750GB of the hard disk to the TC.
You need to understand this is going to be a super slow process and each time you stop it.. it is going to give issues. CCC will at least do a more reliable job of it than TM.
I would also say.. this is going to be tough without ethernet. You need to understand the backup speed over wireless can be 10GB per hour.. that makes 75hrs to backup the disk. The air needs to run non-stop doing that.. without you touching it.
I would get another external drive.. plug that into the MBA and if you really want to use TM.. make a backup one to the other.. but CCC will again do a better job and work faster. It will be much faster than over wireless.
I am trying to think of ways around the issue of just speed.. but plainly you have lots of other issues.. being the simple unreliablity of the TM to identify the TC.
If you want to make this work.. give yourself a weekend.
Load 5.6 utility into the MBA..
http://support.apple.com/kb/DL1482
Take the TC back to 7.5.2 firmware. It is a really old version and latest firmware does it no good at all.
Wipe its hard disk using erase and start over.. give it new names for everything.
So call it TC
Set the wireless to 5ghz and name it TC5ghz
Use WPA2 Personal security. Use a 10 character passkey non dictionary.
At 5ghz you should get 2x the speed as at 2.4ghz but the air will need to be right next to the TC..
(alternatively buy the USB to ethernet cord apple have available.. it is $30 in the apple store and do it over pseudoethernet. http://store.apple.com/au/product/MC704ZM/A/apple-usb-ethernet-adapter That is the wrong store but you get the idea. )
WIth a fully clean system.. now do a full reset of TM.
See A4 http://pondini.org/TM/Troubleshooting.html
Direct the TM to back to the TC.. and make sure the external hard disk is not excluded.
Of course the TC has to be 1TB version to fit that much data.. goes without saying right.
Even over pseudo - ethernet this will take many hours.. and you basically have to leave it to work.. do not touch it.. make sure the MBA cannot sleep though.. turn off sleep.. beforehand.

(Solved) Workflow System Verification Step 4: workitem could not be created

Similar Messages

Maybe you are looking for