[SOLVED] X server doesn't start correctly: Connection to X server lost

I was trying to configure wine on my x64 system and suddenly X shutted down. There is nothing helpful in xinit output, only line "xinit: connection to X server lost". I've got nVidia GeForce 9800 GT, and i'm using nvidia driver. I tried using nouveau, nv and completely reinstalling system from scratch, but nothing helped, I still get the same error.
Here is my /etc/X11/xorg.conf.d/10-monitor : http://paste.pocoo.org/show/297106/
/var/log/Xorg.0.log : http://paste.pocoo.org/show/297107/
Please, help.
Last edited by blin (2010-12-05 08:22:50)

After some experimentation I've found that I can start X as root.
Here is Xorg.log as i run X as root: http://paste.pocoo.org/show/299430/
And here is Xorg.log as i run X as normal user: http://paste.pocoo.org/show/299431/
The only difference that i can see is "Power Button: Close" when running as normal user. I think that there could be some relation to recent udev update.
Any ideas?

Similar Messages

  • While playing games like NFS and CounterStrike my macbook pro it does connects to the hotspot by any device either a Windows laptop, but doesn't show or connect to the server (LAN) created by windows player.Or neither connects to the server that i created

    While playing games like NFS and CounterStrike my macbook pro it does connects to the hotspot by any device either a Windows laptop, but doesn't show or connect to the server (LAN) created by windows player. Or, any other devices doesn't  connects to the LAN server that i created in the Game.     
    Could any one help me please.

    Please do not post more than about 50 lines of console logs or output from an Application crash at a time. No one can make it through those.
    If you had a kernel panic, those are Full of good information and should be posted in their entirety. They are stored, and can be read back and posted using this article:
    How to log a kernel panic

  • Server doesn't start after applying SP3

    Hi,
    after applying SP3 the server doesn't start.
    I just get the following error within the server log.
    Any hints ?
    Regards
    Gerald Eder
    JVMX version - May 20 2007 23:27:34 - 01_REL - optU - windows amd64 - bas2:78002 (mixed mode, sharing)
    (CompilerOracle exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources)
    (CompilerOracle exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain)
    (CompilerOracle exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub)
    (CompilerOracle exclude com/sapportals/portal/prt/util/StringUtils escapeToJS)
    (CompilerOracle exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices)
    (CompilerOracle exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile)
    (CompilerOracle exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup)
    (CompilerOracle exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue)
    (CompilerOracle exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode)
    (CompilerOracle exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode)
    (CompilerOracle exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects)
    (CompilerOracle exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement)
    (CompilerOracle exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence)
    (CompilerOracle exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations)
    (CompilerOracle exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto)
    (CompilerOracle exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects)
    The active factory is : com.sap.engine.boot.loader.StandardClassLoaderFactory
    Using an index file : D:\usr\sap\TC1\J20\j2ee\cluster\bin\index.list
    [GC [ParNew: 14592K->4114K(29120K), 0.0102761 secs] 14592K->4114K(116544K), 0.0103466 secs]
    Reading kernel properties from kernelProperties.bin file...
       Checked the data for 32 ms.
       Read the objects for 250 ms.
       Substituted the values for 47 ms.
    Finished reading kernel objects for 297 ms.
    StartupFramework returned mode [NORMAL]
    StartupFramework returned action [NONE]
    SAP J2EE Engine Version 7.10.3301.162847.20070927153007 is starting...
    Loading: LogManager ... 578 ms.
    Loading: PoolManager ... 0 ms.
    Loading: ApplicationThreadManager ... Error - ID:000004. System is halted. Exception is:
    java.lang.NoClassDefFoundError: com/sap/jvm/Capabilities
         at com.sap.engine.core.thread.impl3.ErrorQueueHandler.<clinit>(ErrorQueueHandler.java:34)
         at com.sap.engine.core.thread.impl3.ThreadManagerImpl.init(ThreadManagerImpl.java:204)
         at com.sap.engine.core.Framework.loadSingleManager(Framework.java:665)
         at com.sap.engine.core.Framework.loadManagers(Framework.java:367)
         at com.sap.engine.core.Framework.start(Framework.java:296)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.sap.engine.boot.FrameThread.startFramework(FrameThread.java:161)
         at com.sap.engine.boot.FrameThread.run(FrameThread.java:183)
         at com.sap.engine.boot.StartFrame.work(StartFrame.java:101)
         at com.sap.engine.boot.Start.main(Start.java:33)
    Caused by: java.lang.ClassNotFoundException: com.sap.jvm.Capabilities
    Loader Info -
    ClassLoader name: [system:Kernel]
    Living status: alive
    Direct parent loaders:
       [library:core_lib]
    Resources:
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\jenqulib.jar
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcantlr~runtime.jar
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcblcachemgmtapi_for_assembly.jar
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcblcachemgmtimpl.jar
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcblcache_pluginslib.jar
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcblframekrn.jar
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcbljkernel_cacheimpl.jar
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcbljkernel_classloadkrn.jar
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcbljkernel_clusterkrn.jar
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcbljkernel_configurationkrn.jar
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcbljkernel_databasekrn.jar
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcbljkernel_licensingkrn.jar
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcbljkernel_lockingkrn.jar
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcbljkernel_logkrn.jar
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcbljkernel_poolkrn.jar
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcbljkernel_servicekrn.jar
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcbljkernel_threadkrn.jar
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcblopensqlkernelimplOpenSQLKrn.jar
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcjeoffline_deployimpl.jar
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcjesessionmgmtimpl.jar
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcseclikeylikey_assembly.jar
         at com.sap.engine.boot.loader.MultiParentClassLoader.loadClass(MultiParentClassLoader.java:259)
         at com.sap.engine.boot.loader.MultiParentClassLoader.loadClass(MultiParentClassLoader.java:228)
         at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:353)
         ... 13 more

    After upgrading the SAPVM the server starts

  • MDM Server doesn't start after upgrade to SP 5

    hi,
    i'm not used to sap services on windows hosts.
    After the Update from 7.1.04 to 7.1.05 the mdm server doesn't start. I found only a few logs (unter c:/usr/sap/SID/MDS00/work). Most of them from sapcpe (without errors or warnings). Only the sapstart.log contains a bit information:
    SAP-R/3-Startup Program
    Starting at 2010/08/16 21:29:18
    Startup Profile: "C:\usr\sap\MDM\SYS\profile\MDM_MDS00_mdmtest"
    Starting Programs
    (1684) Execute: C:\usr\sap\MDM\SYS\exe\uc\NTAMD64\sapcpe.EXE pf=C:\usr\sap\MDM\SYS\profile\MDM_MDS00_mdmtest list:C:\usr\sap\MDM\SYS\exe\uc\NTAMD64/mds.lst
    (976) Execute: C:\usr\sap\MDM\SYS\exe\uc\NTAMD64\sapcpe.EXE pf=C:\usr\sap\MDM\SYS\profile\MDM_MDS00_mdmtest list:C:\usr\sap\MDM\SYS\exe\uc\NTAMD64/shared.lst
    (3632) Execute: C:\usr\sap\MDM\SYS\exe\uc\NTAMD64\sapcpe.EXE pf=C:\usr\sap\MDM\SYS\profile\MDM_MDS00_mdmtest list:C:\usr\sap\MDM\SYS\exe\uc\NTAMD64/sapinstance.lst
    (2172) Execute: C:\usr\sap\MDM\MDS00\exe\mdmcpc.bat C:\usr\sap\MDM\SYS\profile\MDM_MDS00_mdmtest.INI C:\usr\sap\MDM\MDS00\config\mds.ini
    (3652) CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
    Process 3652 died unexpectedly, restarting process
    (3612) Restart CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
    Process 3612 died unexpectedly, restarting process
    (2364) Restart CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
    Process 2364 died unexpectedly, restarting process
    (3576) Restart CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
    Process 3576 died unexpectedly, restarting process
    (3588) Restart CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
    Process 3588 died unexpectedly, final process restart.
    Process will not be restated in the future because of frequent failure.
    (1396) Restart CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
    This isn't really much I can work with. In the sapmmc I found the Option Developer Trace. I try to 'switch it on', but there is no difference.
    With 7.1.04 the server was running well.
    I happy for any suggestions

    Hi,
    Please check out Note 1482822 - MDM Server not starting after MDM 7.1 SP05 was installed.
    hope it helps you.
    Best regards,
    sudhanshu

  • The server returned the error: The connection to the server on port 143 timed out.

    Hello,
    I recently got a MacBook Pro which cam ewith Mavericks. I have entered the email addresses I use the most, they are a combination of Gmail and personal ones that are set up with two different hosting companies. After a random amount of time which may be 5 minutes after opening Mail up to 8 or 9 hours the mailboxes start giving the error 'The server returned the error: The connection to the server xxxx.xxxx on port 143 timed out.' where xxxx.xxxx is the IMAP incoming mail server, the port is 993 for the Gmail accounts. Once it happens for one the others soon follow. The same accounts on my Mac Pro still work correctly at the same time. Anyone have any ideas?
    Edit: I have run the Connection Doctor and while it can connect to each of the SMTP servers it cannot connect to any of the IMAP ones.  A restart of Mail will cure this temporarily.

    Mobileme has moved to moved iCloud:
    http://www.apple.com/icloud/setup/
    Note, if you have Mac OS X 10.6.8 or earlier, read this tip before updating to 10.7:
    https://discussions.apple.com/docs/DOC-6271
    And this tip about changes to iCloud from Mobileme:
    https://discussions.apple.com/docs/DOC-2551

  • Apple Mail The server error encountered was: The connection to the server "

    I have had my apple mail set up for some time now, through Gmail, and it has worked fine. I recently moved into a college dorm and now my apple mail gives me this error message
    There may be a problem with the mail server or network. Check the settings for account "POP Account" or try again.
    The server error encountered was: The connection to the server "pop.gmail.com" on port 995 timed out.
    I've tried everything I could think to try, including taking the SSL off, restarting, quitting apple mail, redoing all the settings, and nothing seems to be helping me connect. I did the connectivity test and it says it's connected to the internet, it's just not getting the mail from my Gmail account. Thanks,
    Aaron

    What are the settings for both your Incoming and Outgoing servers, including port number, authentication method, and whether or not SSL is enabled for both?
    Also, it's possible your college is blocking traffiic from Google, so you might try changing the DNS Servers by going to System Preferences > Network > Configure > TCP/IP and enter these two:
    208.67.222.222
    208.67.220.220
    then click Apply Now, quit System Preferences and restart Mail and any other Internet applications you were running. Check to see if Mail still gives you problems.
    Mulder

  • Photoshop Elements 5.0 PC.  Moved.  How do I change outgoing mail server? Photoshop trying to connect to old server for emailing pictures.  Thanks

    Photoshop Elements 5.0 PC.  Moved.  How do I change outgoing mail server? Photoshop trying to connect to old server for emailing pictures.  Thanks

    You say you have the pse 5 disk?
    I guess you do't have a dvd drive on your new windows 8 computer?
    Do you have access to another computer with a dvd drive?
    Anyway if you can find another computer with a dvd drive you could copy the pse 5 install disc to removable device like a camera card or flash drive.
    You can also buy cheap usb dvd drives.

  • When Starting OC4J, why the report server doesn't start automatically? !!

    Dear All,
    I have DS 10g on my system and I start the OC4J when I have to run either forms or reports.
    But when I attend to start the do the following command from the form:
    WEB.SHOWDOCUMENT(..../getjobid<jobid>?server=<servername>...), I have an error: FRM-41213: Unable to connect to the report server <servername>.
    I noticed that if I run the following URL:http://<server>:.../reports/rwservlet, it gives me a list of command, but the server still not running..But if I add any command to the above URL like for example "getserverinfo" or "showjobs" then the server is started. Now, and after the command, if we return back and we run the report from the form, the report will run successfully.
    The question WHY??
    Regards,
    Joe
    Message was edited by: Joe
    Joe Farah

    Hello,
    That's the way it works ...
    http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_strt.htm
    2.1.3.1 Starting the In-process Server (Windows and UNIX)
    If you are using Reports Server as an in-process server (the default configuration), sending a run report request starts the in-process server; however, if you are sending a request through a command line, the servlet must be invoked first using either the run report URL or the Web command URL. When you have successfully started the servlet, this also means you have successfully started the in-process server.
    If you use "Oracle Application Server", the "in-process" reports server will be started automatically by opmn ...
    Regards

  • [SOLVED] KDE Plasma doesn't load correctly sometimes

    Hi!
    I have strange problem, if i remember correctly since the last qt upgrade. Sometimes the plasma desktop just doesnt load fully, my desktop doesn't react on hotkeys, panels doesn't work on any click, superkaramba doesn't load. The only thing that works is the KDE menu, ant if I run an application from there, plasma starts to finish loading (superkaramba appeares, hotkeys start to work, so it finishes the initialization). It doesn't happen at every startup. This wasn't a too big problem, I thought it would be corrected with a new upgrade, but today my kde desktop froze. My computer didn't react to anything, sometimes  was able to move the cursor, but after a click, this only function also disappeared. I restarted my computer with the reset button, and I also had some strange things on my monitor at boot, and kdm didn't load correctly, I had only two input areas, with unrecognizable characters. So reset again, and I started windows (i have a dual-boot system), and it also had some stranges stripes at startup, and didn't load correctly. So I turned my computer off, and back again (so not with the reset button), and that time nothing strange happened at boot time, KDE started correctly, but I got a freeze again after some time.
    Has anybody had similar problems? Does anybody have an idea what could cause this? I'm not sure it's a software related problem, but it started like one.
    Last edited by Ben_the1st (2010-12-04 12:35:55)

    It looks like it has to do something with the Nvidia driver, cause I have:
    (EE) NVIDIA(0): Error recovery failed.
    (EE) NVIDIA(0): *** Aborting ***
    lines in kdm.log

  • HTTP Server Doesn't Start after install

    I just completed an install of the 10.1.3.1 Oracle App Server. It indicated that the install was successful. I can see in the log the BPEL Manager deploying in the default domain, but I do not see any reference to the HTTP server. Also, when I do a *./opmnctl startall* there is no HTTP_Server~1.log created.
    Is there a step I need to complete to enable the Apache server to start? I must be missing something - the Apache folder is there in the install folder.
    The *./opmnctl status* reports:
    Processes in Instance: AS02.ssg-st-bpel-build0-dev.vzbi.com
    ---------------------------------+--------------------+---------+---------
    ias-component                    | process-type       |     pid | status
    ---------------------------------+--------------------+---------+---------
    OC4JGroup:default_group          | OC4J:home          |   18970 | Alive
    ASG                              | ASG                |     N/A | DownI found the following in the installActions log:
    Install type for "Oracle HTTP Server 10.1.3.0.0 " is "Typical".
    # Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0  could be found. Missing component oracle.bc4j 10.1.2.0.0.
    # Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0  could be found. Missing component oracle.bc4j.oem 10.1.2.0.0.
    # Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0  could be found. Missing component oracle.soap.srv 2.2.0.0.2a.
    # Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0  could be found. Missing component oracle.apache.ejb 9.0.1.0.1.
    # Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0  could be found. Missing component oracle.apache.ojsp 10.1.2.0.0.
         Conflict while setting install type of "Oracle Process Management Notification 10.1.3.1.0 "  to "Typical (Typical)". Install type already set to "Complete (Complete)". Seting it to "Custom (Custom)".
    # Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0  could be found. Missing component oracle.dcm 10.1.2.0.0.
    # Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0  could be found. Missing component oracle.sysman.emd 10.0.2.0.0.
    # Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0  could be found. Missing component oracle.java.j2ee.iascfg 10.1.2.0.0.
    # Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0  could be found. Missing component oracle.logloader 10.1.2.0.0.
    # Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0  could be found. Missing component oracle.webdb.monitor 10.1.2.0.0.
    What am I missing?  Is there a package I need to install before installing the App Server?
    Edited by: BCurtis on Sep 24, 2010 3:22 PM
    Edited by: BCurtis on Sep 24, 2010 3:25 PM

    I now know I'm missing the <ias-component id="HTTP_Server"> in the opmn.xml file. The following is from an older install of a few years ago.
             <ias-component id="HTTP_Server">
                <process-type id="HTTP_Server" module-id="OHS">
                   <module-data>
                      <category id="start-parameters">
                         <data id="start-mode" value="ssl-enabled"/>
                      </category>
                   </module-data>
                   <process-set id="HTTP_Server" numprocs="1"/>
                </process-type>
             </ias-component>This explains why the startall doesn't start the HTTP Server, but why would the install not include the HTTP Server in the configuration?

  • [SOLVED]Compiz Fusion doesn't start!

    Hello,
    After an upgrade Compiz Fusion doesn't start. Normally I start Compiz Fusion with the command:
    fusion-icon
    But now it gives on a terminal the following output:
    fusion-icon
    * Detected Session: gnome
    * execution of "which glxinfo" failed
    * Error: glxinfo not installed!
    I searched with Yaourt on "glxinfo", but there is no package called "glxinfo".
    Could someone help?
    Jozef
    Last edited by jozef00 (2009-05-11 16:01:39)

    Hello,
    The problem is solved. Instead of
    fusion-icon
    I use
    compiz-manager
    Thanks to xaiviax for his reply.
    Jozef

  • J2ee server doesn't started in debug mode

    Hi.
    I set J2EE server debug mode using configtool and I try to start J2EE.
    At that time, dispatcher, SDM process started successfully but server process doesn't start.
    SAP MMC has "waiiting for start" status for server process.
    Any ideas ?
    Regards, Arnold.

    Right aside the Enable Debugging checkbox in the configtool, there's a 'Restricted Load Balancing' checkbox. As I remember, in some version of the J2EE engine, you need to invert its state in order to get debugging to run.
    Regards,
    Armin

  • Calendar Server Fails to start correctly

    On bringing up components on comm suite 5, when I bring up the calendar server the admin server fails and the http server timesout.
    # ./start-cal
    Connecting to watcher ...
    Launching watcher ...
    Starting ens server ... 14546
    Starting store server .... 14547
    checking store server status ... ready
    Starting notify server .... 14548
    Starting admin server ............................................................. failed
    Starting http server ............................................................... timeout
    Any help would be greatly appreciated.

    b-lobills wrote:
    On bringing up components on comm suite 5, when I bring up the calendar server the admin server fails and the http server timesout.If your directory server was not running when you started calendar server you can see this behaviour. As was noted in the other forum posting, you need to review the calendar server admin.log and http.log files to isolate the problem further.
    Regards,
    Shane.

  • Endeca Server doesn't start

    Hi,
    I'm using OEID 3.0 on an Oracle Linux virtual machine. Two days ago I've experienced an issue with Endeca Server: when I start the endeca server domain, launching the $ENDECA_DOMAIN/bin/startWebLogic.sh script the domain starts, but in the standard output I can see this error message:
    <17-lug-2013 11.03.18 CEST> <Warning> <com.endeca.opmodel.control.ClusterCoordinator> <OES-000056> <OES-000056: ClusterCoordinator process ended. Automatically restarting>
    1994415 [Thread-36-SendThread(localhost:2181)] INFO   [ClientCnxn] Opening socket connection to server localhost/127.0.0.1:2181
    1994416 [Thread-36-SendThread(localhost:2181)] WARN   [ClientCnxn] Session 0x0 for server null, unexpected error, closing socket connection and attempting reconnect
    java.net.ConnectException: Connection refused
      at sun.nio.ch.SocketChannelImpl.checkConnect(Native Method)
      at sun.nio.ch.SocketChannelImpl.finishConnect(SocketChannelImpl.java:599)
      at org.apache.zookeeper.ClientCnxn$SendThread.run(ClientCnxn.java:1143)
    1995685 [Thread-36-SendThread(localhost:2181)] INFO   [ClientCnxn] Opening socket connection to server localhost/127.0.0.1:2181
    1995685 [Thread-36-SendThread(localhost:2181)] WARN   [ClientCnxn] Session 0x0 for server null, unexpected error, closing socket connection and attempting reconnect
    java.net.ConnectException: Connection refused
      at sun.nio.ch.SocketChannelImpl.checkConnect(Native Method)
      at sun.nio.ch.SocketChannelImpl.finishConnect(SocketChannelImpl.java:599)
      at org.apache.zookeeper.ClientCnxn$SendThread.run(ClientCnxn.java:1143)
    <17-lug-2013 11.03.22 CEST> <Warning> <com.endeca.opmodel.control.ClusterCoordinator> <OES-000056> <OES-000056: ClusterCoordinator process ended. Automatically restarting>
    1997172 [Thread-36-SendThread(localhost:2181)] INFO   [ClientCnxn] Opening socket connection to server localhost/127.0.0.1:2181
    1997172 [Thread-36-SendThread(localhost:2181)] WARN   [ClientCnxn] Session 0x0 for server null, unexpected error, closing socket connection and attempting reconnect
    This message is repeated endlessy and the server isn't active.
    If I try to retrieve the list of data domains using the endeca-cmd command, the result is:
    [oracle@testbi endeca-cmd]$ endeca-cmd list-dd
    GRAVE: Error while invoking endpoint "http://localhost:7001/endeca-server/ws/manage" from client
    endeca-cmd encountered a problem.
    caused by:
    The Endeca Server returned an error: OES-000075: Caught exception when starting Endeca Server: null
    caused by:
    OES-000075: Caught exception when starting Endeca Server: null
      OES-000075: Caught exception when starting Endeca Server: null
    But if I try to digit in my web browser the url http://192.168.2.16:7001/endeca-server/ws/manage?wsdl I can see that the web services are active and I can display the xml.
    Can anyone help me please?
    Best regards,
    Samuele Scattolini

    Hi Samuele,
    Another issue might be related to the fact that you are running the deployment on a VM. Specifically, could it be that that the machines you were using aren't able to resolve the names to addresses?  We've seen this on VM machines - they seem to have two names configured, one of which is resolvable externally and one of which is only resolvable locally. If this indeed is the case in your deployment, try the following:
    1. Go to $MW_HOME/user_projects/domains/endeca_server_domain/config
    2. Check the contents of the EndecaServer.properties file, on all machines on which the Endeca Server is deployed. Specifically, see how the host on which the Cluster Coordinator should be running is configured.
    For example, in a three-node Endeca Server cluster, this line may read as in this example:
    endeca-cluster-coordinator-hosts=host1,host2,host3
    where host1, host2 and host3 are local host names of your machines.
    It is possible that if your machine is configured with a fully qualified domain name, such as host1.us.oracle.com, but the EndecaServer.properties file lists this machine as host1, then, due to the fact that it is a VM, the name is not resolvable.
    To see if this is the case, try changing this file to use another type of notation (say, switch from FQDN to a short name, or vice versa, depending on what is in your etc/hosts and ipconfig, and see if this works.
    Hope this helps,
    Here is a doc link about the EndecaServer.properties file: http://docs.oracle.com/cd/E37483_01/server.751/es_install/toc.htm#Changing%20settings%20in%20EndecaServer.properties
    It applies to a data domain cluster, but even in a single-node deployment, the Cluster Coordinator is still running, on this same node, and thus its host must be resolvable.
    Hope this helps,
    Julia

  • J2EE server doesn't start (has been starting..) EP6SP9 on Windows XP Pro.

    I am trying to install EP6 SP9 sneak preview edition. Just I followed the instructions.
    Installation is successful. After that I installed PDK6(6090) using SDM. I also exported initial data objects to SLD.
    When I restart the from SAPMMC console, jcontrol.exe has been in "starting" state(indicating with yellow color). It doesn't start even afer couple of hours.
    Excerpt from <i>dev_jcontrol</i>
    JStartupStartJLaunch: program = C:usrsapJ2EJC00/j2ee/os_libs/jlaunch.exe
    -> arg[00] = C:usrsapJ2EJC00/j2ee/os_libs/jlaunch.exe
    -> arg[01] = pf=C:usrsapJ2ESYSprofileJ2E_JC00_epsystem
    -> arg[02] = -DSAPINFO=J2E_00_server
    -> arg[03] = -file=C:usrsapJ2EJC00j2eeclusterinstance.properties
    -> arg[04] = -nodeName=ID5454450
    -> arg[05] = -nodeId=1
    -> arg[06] = -syncSem=JSTARTUP_WAIT_ON_2772
    -> arg[07] = -jvmOutFile=C:usrsapJ2EJC00workjvm_server0.out
    -> arg[08] = -jvmOutMode=append
    -> arg[09] = -stdOutFile=C:usrsapJ2EJC00workstd_server0.out
    -> arg[10] = -stdOutMode=append
    -> arg[11] = -traceMode=append
    -> arg[12] = -locOutFile=C:usrsapJ2EJC00workdev_server0
    -> arg[13] = -mode=JCONTROL
    -> arg[14] = pf=C:usrsapJ2ESYSprofileJ2E_JC00_epsystem
    -> lib path = PATH=C:j2sdk1.4.2_08jrebinserver;C:j2sdk1.4.2_08jrebin;c:sapdbprogramsbin;c:sapdbprogramspgm;C:usrsapPython.;C:oracleora92bin;C:Program FilesOraclejre1.3.1bin;C:Program FilesOraclejre1.1.8bin;C:WINDOWSsystem32;C:WINDOWS;C:WINDOWSSystem32Wbem;C:Program FilesATI TechnologiesATI Control Panel;C:j2sdk1.4.2_08bin;C:softwaresnmap-3.81;C:usrsapJ2ESCS01exe;C:usrsapJ2EJC00exe;C:usrsapJ2ESYSexerun
    -> exe path = PATH=C:j2sdk1.4.2_08bin;C:usrsapJ2EJC00j2eeos_libs;c:sapdbprogramsbin;c:sapdbprogramspgm;C:usrsapPython.;C:oracleora92bin;C:Program FilesOraclejre1.3.1bin;C:Program FilesOraclejre1.1.8bin;C:WINDOWSsystem32;C:WINDOWS;C:WINDOWSSystem32Wbem;C:Program FilesATI TechnologiesATI Control Panel;C:j2sdk1.4.2_08bin;C:softwaresnmap-3.81;C:usrsapJ2ESCS01exe;C:usrsapJ2EJC00exe;C:usrsapJ2ESYSexerun
    [Thr 2776] JControlICheckProcessList: process server0 started (PID:4304)
    [Thr 3696] *** ERROR => MsIAttachEx: NiBufConnect to epsystem/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
    [Thr 3696] *** WARNING => Can't reconnect to message server (epsystem/3601) [rc = -100]-> reconnect [jcntrms.c    295]
    [Thr 3696] Thu Jul 07 09:46:50 2005
    [Thr 3696] *** ERROR => MsIAttachEx: NiBufConnect to epsystem/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
    [Thr 3696] *** WARNING => Can't reconnect to message server (epsystem/3601) [rc = -100]-> reconnect [jcntrms.c    295]
    [Thr 3696] Thu Jul 07 09:46:55 2005
    [Thr 3696] *** ERROR => MsIAttachEx: NiBufConnect to epsystem/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
    [Thr 3696] *** WARNING => Can't reconnect to message server (epsystem/3601) [rc = -100]-> reconnect [jcntrms.c    295]
    [Thr 3696] Thu Jul 07 09:47:00 2005
    [Thr 3696] *** ERROR => MsIAttachEx: NiBufConnect to epsystem/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
    [Thr 3696] *** WARNING => Can't reconnect to message server (epsystem/3601) [rc = -100]-> reconnect [jcntrms.c    295]
    [Thr 3696] Thu Jul 07 09:47:10 2005
    [Thr 3696] *** ERROR => MsIAttachEx: NiBufConnect to epsystem/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
    [Thr 3696] *** WARNING => Can't reconnect to message server (epsystem/3601) [rc = -100]-> reconnect [jcntrms.c    295]
    [Thr 3696] Thu Jul 07 09:47:15 2005
    [Thr 3696] *** ERROR => MsIAttachEx: NiBufConnect to epsystem/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
    [Thr 3696] *** WARNING => Can't reconnect to message server (epsystem/3601) [rc = -100]-> reconnect [jcntrms.c    295]
    [Thr 3696] Thu Jul 07 09:47:21 2005
    [Thr 3696] *** ERROR => MsIAttachEx: NiBufConnect to epsystem/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
    [Thr 3696] *** WARNING => Can't reconnect to message server (epsystem/3601) [rc = -100]-> reconnect [jcntrms.c    295]
    [Thr 3696] Thu Jul 07 09:47:26 2005
    [Thr 3696] *** ERROR => MsIAttachEx: NiBufConnect to epsystem/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
    [Thr 3696] *** WARNING => Can't reconnect to message server (epsystem/3601) [rc = -100]-> reconnect [jcntrms.c    295]
    [Thr 3696] Thu Jul 07 09:47:31 2005
    [Thr 3696] JControlMSConnect: reconnected to message server (epsystem/3601)
    [Thr 3696] Thu Jul 07 09:52:17 2005
    [Thr 3696] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 3696] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 3696] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 3696] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 3696] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 3696] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 3696] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 3696] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 3696] Thu Jul 07 09:57:24 2005
    [Thr 3696] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
    [Thr 3696] Thu Jul 07 10:02:25 2005
    [Thr 3696] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
    [Thr 3696] Thu Jul 07 10:07:45 2005
    [Thr 3696] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
    [Thr 3696] Thu Jul 07 10:12:46 2005
    [Thr 3696] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
    [Thr 3696] Thu Jul 07 10:18:06 2005
    [Thr 3696] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
    [Thr 3696] Thu Jul 07 10:23:07 2005
    [Thr 3696] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
    [Thr 3696] Thu Jul 07 10:28:27 2005
    [Thr 3696] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
    (Same lines repeated for every 5 minutes)
    MMC shows that all processes are running inclucing the message server
    C:usrsapJ2EJC00j2eeclusterinstance.properties
    ID5454400.ClassPath=./bin/boot/boot.jar:./bin/system/bytecode.jar:.
    ID5454400.Debuggable=no
    ID5454400.JLaunchParameters=
    ID5454400.JavaParameters=-Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Djco.jarm=1 -XX:NewSize=28m -XX:MaxNewSize=28m Xms170m -XX:+DisableExplicitGC -Drdbms.driverLocation=C:/sapdb/programs/runtime/jar/sapdbc.jar -Dsys.global.dir=C:/usr/sap/J2E/SYS/global/
    ID5454400.LogName=dispatcher
    ID5454400.MainClass=com.sap.engine.boot.Start
    ID5454400.MaxHeapSize=170
    ID5454400.Name=dispatcher
    ID5454400.Parameters=
    ID5454400.RootPath=C:/usr/sap/J2E/JC00/j2ee/cluster/dispatcher
    ID5454400.Type=dispatcher
    ID5454450.ClassPath=./bin/boot/boot.jar:./bin/boot/jaas.jar:./bin/system/bytecode.jar:.
    ID5454450.DebugMode=no
    ID5454450.DebugPort=50021
    ID5454450.Debuggable=no
    ID5454450.JLaunchParameters=
    ID5454450.JavaParameters=-Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -Dsun.io.useCanonCaches=false -Djava.awt.headless=true -XX:SoftRefLRUPolicyMSPerMB=1 -verbose:gc -XX:+PrintGCDetails -XX:+PrintGCTimeStamps -XX:+UseParNewGC -Xms512M -Xmx512M -XX:MaxNewSize=85M -XX:NewSize=85M -XX:+DisableExplicitGC -XX:MaxPermSize=192M -XX:PermSize=192M -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Drdbms.driverLocation=C:/sapdb/programs/runtime/jar/sapdbc.jar -Dsys.global.dir=C:/usr/sap/J2E/SYS/global/
    ID5454450.LogName=server0
    ID5454450.MainClass=com.sap.engine.boot.Start
    ID5454450.MaxHeapSize=512
    ID5454450.Name=server0
    ID5454450.Parameters=
    ID5454450.RootPath=C:/usr/sap/J2E/JC00/j2ee/cluster/server0
    ID5454450.Type=server
    bootstrap.ClassPath=./bootstrap/launcher.jar
    bootstrap.JavaParameters=-Djco.jarm=1 -Djco.jarm=1
    bootstrap.MainClass=com.sap.engine.offline.OfflineToolStart
    bootstrap.MaxHeapSize=128
    bootstrap.Name=bootstrap
    bootstrap.Parameters=com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0054544
    bootstrap.RootPath=C:/usr/sap/J2E/JC00/j2ee/cluster
    bootstrap.Type=bootstrap
    bootstrap_ID5454400.ClassPath=./bootstrap/launcher.jar
    bootstrap_ID5454400.JLaunchParameters=
    bootstrap_ID5454400.JavaParameters=-Djco.jarm=1 -Djco.jarm=1
    bootstrap_ID5454400.MainClass=com.sap.engine.offline.OfflineToolStart
    bootstrap_ID5454400.MaxHeapSize=170
    bootstrap_ID5454400.Name=dispatcher bootstrap
    bootstrap_ID5454400.Parameters=com.sap.engine.bootstrap.Bootstrap ./bootstrap ID005454400
    bootstrap_ID5454400.RootPath=C:/usr/sap/J2E/JC00/j2ee/cluster
    bootstrap_ID5454400.Type=bootstrap
    bootstrap_ID5454450.ClassPath=./bootstrap/launcher.jar
    bootstrap_ID5454450.JLaunchParameters=
    bootstrap_ID5454450.JavaParameters=-Djco.jarm=1 -Djco.jarm=1
    bootstrap_ID5454450.MainClass=com.sap.engine.offline.OfflineToolStart
    bootstrap_ID5454450.MaxHeapSize=512
    bootstrap_ID5454450.Name=server0 bootstrap
    bootstrap_ID5454450.Parameters=com.sap.engine.bootstrap.Bootstrap ./bootstrap ID005454450
    bootstrap_ID5454450.RootPath=C:/usr/sap/J2E/JC00/j2ee/cluster
    bootstrap_ID5454450.Type=bootstrap
    instance.enabled=yes
    instance.install.dir=C:usrsapJ2EJC00j2ee
    instance.ms.host=epsystem
    instance.ms.port=3601
    instance.osLibsPath=C:/usr/sap/J2E/JC00/j2ee/os_libs
    instance.runAction=NONE
    instance.runMode=NORMAL
    <i>syslog</i> has lot of error messages:
    SAP Basis System: Operating system call           recv failed (error no. 10054)
    When I counter this problem, I uninstalled and installed again. Still same problem persists.
    Any ideas?
    Thanks

    Real problem is log is full.
    To overwrite the log files run this:
    dbmcli [-n <hostname>] -d <databasename> -u <dbmuser>,<dbmuserpw> util_execute set log auto overwrite on
    Default MaxDB installation accepts (control, control) for (username, passwd)
    How to overwrite/remove log files?

Maybe you are looking for