[Solved] X-server doesn't start...

Hi. After installing the latest Arch about 4 times, I've run out of ideas. I'm installing on an old pc that has on-board AGP graphics, Aladdin TNT2. With a wired network connection, I have installed Xorg, Nouveau, Vesa & NV drivers, along with Fluxbox, but it boots to a login prompt. Since there is no xorg.conf, I tried running 'X -configure' but am told something like "the 2 screens configured don't match the 1 screen detected', so no xorg.conf is created. So I copied&pasted one from the net from someone who also had a TNT2 card, and tried running X after altered the xorg.conf "Driver" entry. With both 'vesa' and 'nv' I am treated to a black screen and on interrupting it, see a line saying "error setting MTRR". Using 'nouveau' in xorg.conf there is no attempt to start, I am instantly presented with a message saying that there was no device detected.
I have searched & found a few people here that had identical problems to what I am describing, but unfortunately these posts were of little help to me. There is one about 'xinitrc' being a likely culprit but I don't even seem to have this - is there something additional I need to install for this? I tried creating a text file with a "fluxbox" entry but it didn't have any effect. What is bizarre (to me) about all this is that I have never come across ANY Linux that has ever had a problem starting an X-server on this pc, so I'm now convinced that it's not a driver issue at all...
Before I forget, there seems to be a nasty bug in the installation process - after you select your packages, if any have dependency issues (in my case, it was something to do with 'curl') you are immediately 'failed' when you select to install them, even though on-screen it is giving you the option to skip the offending packages, in actuality the "y/N" choice given defaults to 'NO' and you are not even given the option 'cos it goes straight to 'continue' with no chance of any user-input! I rate this as 'nasty' 'cos after I had spent almost 40min picking my list of packages from the huge package-list, I then had no option but to go through the entire process again, leaving out the packages that caused the problem! Surely there must be a way of re-doing this without it having it forget all the already-selected packages?
Last edited by omelette (2011-09-16 23:25:09)

I'm starting to realise just how little I know about Linux despite having used other distros for about 5 years now - my problem was caused by not having had a desktop-manager installed It also highlights the difference between using something, and understanding how it operates!
For anyone stumbling across this with a similar problem, I just installed xorg-xdm - pacman -S xorg-xdm
That said, with a skeleton-Fluxbox finally running, it's pretty much non-functional - lots of more stuff to install/figure out! I must say though, the Arch documentation is excellent, once you can find what you're looking for.

Similar Messages

[SOLVED] X server doesn't start correctly: Connection to X server lost

I was trying to configure wine on my x64 system and suddenly X shutted down. There is nothing helpful in xinit output, only line "xinit: connection to X server lost". I've got nVidia GeForce 9800 GT, and i'm using nvidia driver. I tried using nouveau, nv and completely reinstalling system from scratch, but nothing helped, I still get the same error.
Here is my /etc/X11/xorg.conf.d/10-monitor : http://paste.pocoo.org/show/297106/
/var/log/Xorg.0.log : http://paste.pocoo.org/show/297107/
Please, help.
Last edited by blin (2010-12-05 08:22:50)

After some experimentation I've found that I can start X as root.
Here is Xorg.log as i run X as root: http://paste.pocoo.org/show/299430/
And here is Xorg.log as i run X as normal user: http://paste.pocoo.org/show/299431/
The only difference that i can see is "Power Button: Close" when running as normal user. I think that there could be some relation to recent udev update.
Any ideas?

Server doesn't start after applying SP3

Hi,
after applying SP3 the server doesn't start.
I just get the following error within the server log.
Any hints ?
Regards
Gerald Eder
JVMX version - May 20 2007 23:27:34 - 01_REL - optU - windows amd64 - bas2:78002 (mixed mode, sharing)
(CompilerOracle exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources)
(CompilerOracle exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain)
(CompilerOracle exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub)
(CompilerOracle exclude com/sapportals/portal/prt/util/StringUtils escapeToJS)
(CompilerOracle exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices)
(CompilerOracle exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile)
(CompilerOracle exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup)
(CompilerOracle exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue)
(CompilerOracle exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode)
(CompilerOracle exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode)
(CompilerOracle exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects)
(CompilerOracle exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement)
(CompilerOracle exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence)
(CompilerOracle exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations)
(CompilerOracle exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto)
(CompilerOracle exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects)
The active factory is : com.sap.engine.boot.loader.StandardClassLoaderFactory
Using an index file : D:\usr\sap\TC1\J20\j2ee\cluster\bin\index.list
[GC [ParNew: 14592K->4114K(29120K), 0.0102761 secs] 14592K->4114K(116544K), 0.0103466 secs]
Reading kernel properties from kernelProperties.bin file...
   Checked the data for 32 ms.
   Read the objects for 250 ms.
   Substituted the values for 47 ms.
Finished reading kernel objects for 297 ms.
StartupFramework returned mode [NORMAL]
StartupFramework returned action [NONE]
SAP J2EE Engine Version 7.10.3301.162847.20070927153007 is starting...
Loading: LogManager ... 578 ms.
Loading: PoolManager ... 0 ms.
Loading: ApplicationThreadManager ... Error - ID:000004. System is halted. Exception is:
java.lang.NoClassDefFoundError: com/sap/jvm/Capabilities
     at com.sap.engine.core.thread.impl3.ErrorQueueHandler.<clinit>(ErrorQueueHandler.java:34)
     at com.sap.engine.core.thread.impl3.ThreadManagerImpl.init(ThreadManagerImpl.java:204)
     at com.sap.engine.core.Framework.loadSingleManager(Framework.java:665)
     at com.sap.engine.core.Framework.loadManagers(Framework.java:367)
     at com.sap.engine.core.Framework.start(Framework.java:296)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.sap.engine.boot.FrameThread.startFramework(FrameThread.java:161)
     at com.sap.engine.boot.FrameThread.run(FrameThread.java:183)
     at com.sap.engine.boot.StartFrame.work(StartFrame.java:101)
     at com.sap.engine.boot.Start.main(Start.java:33)
Caused by: java.lang.ClassNotFoundException: com.sap.jvm.Capabilities
Loader Info -
ClassLoader name: [system:Kernel]
Living status: alive
Direct parent loaders:
   [library:core_lib]
Resources:
   D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\jenqulib.jar
   D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcantlr~runtime.jar
   D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcblcachemgmtapi_for_assembly.jar
   D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcblcachemgmtimpl.jar
   D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcblcache_pluginslib.jar
   D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcblframekrn.jar
   D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcbljkernel_cacheimpl.jar
   D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcbljkernel_classloadkrn.jar
   D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcbljkernel_clusterkrn.jar
   D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcbljkernel_configurationkrn.jar
   D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcbljkernel_databasekrn.jar
   D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcbljkernel_licensingkrn.jar
   D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcbljkernel_lockingkrn.jar
   D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcbljkernel_logkrn.jar
   D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcbljkernel_poolkrn.jar
   D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcbljkernel_servicekrn.jar
   D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcbljkernel_threadkrn.jar
   D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcblopensqlkernelimplOpenSQLKrn.jar
   D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcjeoffline_deployimpl.jar
   D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcjesessionmgmtimpl.jar
   D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcseclikeylikey_assembly.jar
     at com.sap.engine.boot.loader.MultiParentClassLoader.loadClass(MultiParentClassLoader.java:259)
     at com.sap.engine.boot.loader.MultiParentClassLoader.loadClass(MultiParentClassLoader.java:228)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:353)
     ... 13 more

After upgrading the SAPVM the server starts

MDM Server doesn't start after upgrade to SP 5

hi,
i'm not used to sap services on windows hosts.
After the Update from 7.1.04 to 7.1.05 the mdm server doesn't start. I found only a few logs (unter c:/usr/sap/SID/MDS00/work). Most of them from sapcpe (without errors or warnings). Only the sapstart.log contains a bit information:
SAP-R/3-Startup Program
Starting at 2010/08/16 21:29:18
Startup Profile: "C:\usr\sap\MDM\SYS\profile\MDM_MDS00_mdmtest"
Starting Programs
(1684) Execute: C:\usr\sap\MDM\SYS\exe\uc\NTAMD64\sapcpe.EXE pf=C:\usr\sap\MDM\SYS\profile\MDM_MDS00_mdmtest list:C:\usr\sap\MDM\SYS\exe\uc\NTAMD64/mds.lst
(976) Execute: C:\usr\sap\MDM\SYS\exe\uc\NTAMD64\sapcpe.EXE pf=C:\usr\sap\MDM\SYS\profile\MDM_MDS00_mdmtest list:C:\usr\sap\MDM\SYS\exe\uc\NTAMD64/shared.lst
(3632) Execute: C:\usr\sap\MDM\SYS\exe\uc\NTAMD64\sapcpe.EXE pf=C:\usr\sap\MDM\SYS\profile\MDM_MDS00_mdmtest list:C:\usr\sap\MDM\SYS\exe\uc\NTAMD64/sapinstance.lst
(2172) Execute: C:\usr\sap\MDM\MDS00\exe\mdmcpc.bat C:\usr\sap\MDM\SYS\profile\MDM_MDS00_mdmtest.INI C:\usr\sap\MDM\MDS00\config\mds.ini
(3652) CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
Process 3652 died unexpectedly, restarting process
(3612) Restart CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
Process 3612 died unexpectedly, restarting process
(2364) Restart CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
Process 2364 died unexpectedly, restarting process
(3576) Restart CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
Process 3576 died unexpectedly, restarting process
(3588) Restart CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
Process 3588 died unexpectedly, final process restart.
Process will not be restated in the future because of frequent failure.
(1396) Restart CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
This isn't really much I can work with. In the sapmmc I found the Option Developer Trace. I try to 'switch it on', but there is no difference.
With 7.1.04 the server was running well.
I happy for any suggestions

Hi,
Please check out Note 1482822 - MDM Server not starting after MDM 7.1 SP05 was installed.
hope it helps you.
Best regards,
sudhanshu

HTTP Server Doesn't Start after install

I just completed an install of the 10.1.3.1 Oracle App Server. It indicated that the install was successful. I can see in the log the BPEL Manager deploying in the default domain, but I do not see any reference to the HTTP server. Also, when I do a *./opmnctl startall* there is no HTTP_Server~1.log created.
Is there a step I need to complete to enable the Apache server to start? I must be missing something - the Apache folder is there in the install folder.
The *./opmnctl status* reports:
Processes in Instance: AS02.ssg-st-bpel-build0-dev.vzbi.com
---------------------------------+--------------------+---------+---------
ias-component                    | process-type       |     pid | status
---------------------------------+--------------------+---------+---------
OC4JGroup:default_group          | OC4J:home          |   18970 | Alive
ASG                              | ASG                |     N/A | DownI found the following in the installActions log:
Install type for "Oracle HTTP Server 10.1.3.0.0 " is "Typical".
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.bc4j 10.1.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.bc4j.oem 10.1.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.soap.srv 2.2.0.0.2a.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.apache.ejb 9.0.1.0.1.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.apache.ojsp 10.1.2.0.0.
     Conflict while setting install type of "Oracle Process Management Notification 10.1.3.1.0 " to "Typical (Typical)". Install type already set to "Complete (Complete)". Seting it to "Custom (Custom)".
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.dcm 10.1.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.sysman.emd 10.0.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.java.j2ee.iascfg 10.1.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.logloader 10.1.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.webdb.monitor 10.1.2.0.0.
What am I missing? Is there a package I need to install before installing the App Server?
Edited by: BCurtis on Sep 24, 2010 3:22 PM
Edited by: BCurtis on Sep 24, 2010 3:25 PM

I now know I'm missing the <ias-component id="HTTP_Server"> in the opmn.xml file. The following is from an older install of a few years ago.
         <ias-component id="HTTP_Server">
            <process-type id="HTTP_Server" module-id="OHS">
               <module-data>
                  <category id="start-parameters">
                     <data id="start-mode" value="ssl-enabled"/>
                  </category>
               </module-data>
               <process-set id="HTTP_Server" numprocs="1"/>
            </process-type>
         </ias-component>This explains why the startall doesn't start the HTTP Server, but why would the install not include the HTTP Server in the configuration?

[SOLVED]Compiz Fusion doesn't start!

Hello,
After an upgrade Compiz Fusion doesn't start. Normally I start Compiz Fusion with the command:
fusion-icon
But now it gives on a terminal the following output:
fusion-icon
* Detected Session: gnome
* execution of "which glxinfo" failed
* Error: glxinfo not installed!
I searched with Yaourt on "glxinfo", but there is no package called "glxinfo".
Could someone help?
Jozef
Last edited by jozef00 (2009-05-11 16:01:39)

Hello,
The problem is solved. Instead of
fusion-icon
I use
compiz-manager
Thanks to xaiviax for his reply.
Jozef

J2ee server doesn't started in debug mode

Hi.
I set J2EE server debug mode using configtool and I try to start J2EE.
At that time, dispatcher, SDM process started successfully but server process doesn't start.
SAP MMC has "waiiting for start" status for server process.
Any ideas ?
Regards, Arnold.

Right aside the Enable Debugging checkbox in the configtool, there's a 'Restricted Load Balancing' checkbox. As I remember, in some version of the J2EE engine, you need to invert its state in order to get debugging to run.
Regards,
Armin

J2EE server doesn't start (has been starting..) EP6SP9 on Windows XP Pro.

I am trying to install EP6 SP9 sneak preview edition. Just I followed the instructions.
Installation is successful. After that I installed PDK6(6090) using SDM. I also exported initial data objects to SLD.
When I restart the from SAPMMC console, jcontrol.exe has been in "starting" state(indicating with yellow color). It doesn't start even afer couple of hours.
Excerpt from <i>dev_jcontrol</i>
JStartupStartJLaunch: program = C:usrsapJ2EJC00/j2ee/os_libs/jlaunch.exe
-> arg[00] = C:usrsapJ2EJC00/j2ee/os_libs/jlaunch.exe
-> arg[01] = pf=C:usrsapJ2ESYSprofileJ2E_JC00_epsystem
-> arg[02] = -DSAPINFO=J2E_00_server
-> arg[03] = -file=C:usrsapJ2EJC00j2eeclusterinstance.properties
-> arg[04] = -nodeName=ID5454450
-> arg[05] = -nodeId=1
-> arg[06] = -syncSem=JSTARTUP_WAIT_ON_2772
-> arg[07] = -jvmOutFile=C:usrsapJ2EJC00workjvm_server0.out
-> arg[08] = -jvmOutMode=append
-> arg[09] = -stdOutFile=C:usrsapJ2EJC00workstd_server0.out
-> arg[10] = -stdOutMode=append
-> arg[11] = -traceMode=append
-> arg[12] = -locOutFile=C:usrsapJ2EJC00workdev_server0
-> arg[13] = -mode=JCONTROL
-> arg[14] = pf=C:usrsapJ2ESYSprofileJ2E_JC00_epsystem
-> lib path = PATH=C:j2sdk1.4.2_08jrebinserver;C:j2sdk1.4.2_08jrebin;c:sapdbprogramsbin;c:sapdbprogramspgm;C:usrsapPython.;C:oracleora92bin;C:Program FilesOraclejre1.3.1bin;C:Program FilesOraclejre1.1.8bin;C:WINDOWSsystem32;C:WINDOWS;C:WINDOWSSystem32Wbem;C:Program FilesATI TechnologiesATI Control Panel;C:j2sdk1.4.2_08bin;C:softwaresnmap-3.81;C:usrsapJ2ESCS01exe;C:usrsapJ2EJC00exe;C:usrsapJ2ESYSexerun
-> exe path = PATH=C:j2sdk1.4.2_08bin;C:usrsapJ2EJC00j2eeos_libs;c:sapdbprogramsbin;c:sapdbprogramspgm;C:usrsapPython.;C:oracleora92bin;C:Program FilesOraclejre1.3.1bin;C:Program FilesOraclejre1.1.8bin;C:WINDOWSsystem32;C:WINDOWS;C:WINDOWSSystem32Wbem;C:Program FilesATI TechnologiesATI Control Panel;C:j2sdk1.4.2_08bin;C:softwaresnmap-3.81;C:usrsapJ2ESCS01exe;C:usrsapJ2EJC00exe;C:usrsapJ2ESYSexerun
[Thr 2776] JControlICheckProcessList: process server0 started (PID:4304)
[Thr 3696] *** ERROR => MsIAttachEx: NiBufConnect to epsystem/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 3696] *** WARNING => Can't reconnect to message server (epsystem/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 3696] Thu Jul 07 09:46:50 2005
[Thr 3696] *** ERROR => MsIAttachEx: NiBufConnect to epsystem/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 3696] *** WARNING => Can't reconnect to message server (epsystem/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 3696] Thu Jul 07 09:46:55 2005
[Thr 3696] *** ERROR => MsIAttachEx: NiBufConnect to epsystem/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 3696] *** WARNING => Can't reconnect to message server (epsystem/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 3696] Thu Jul 07 09:47:00 2005
[Thr 3696] *** ERROR => MsIAttachEx: NiBufConnect to epsystem/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 3696] *** WARNING => Can't reconnect to message server (epsystem/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 3696] Thu Jul 07 09:47:10 2005
[Thr 3696] *** ERROR => MsIAttachEx: NiBufConnect to epsystem/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 3696] *** WARNING => Can't reconnect to message server (epsystem/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 3696] Thu Jul 07 09:47:15 2005
[Thr 3696] *** ERROR => MsIAttachEx: NiBufConnect to epsystem/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 3696] *** WARNING => Can't reconnect to message server (epsystem/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 3696] Thu Jul 07 09:47:21 2005
[Thr 3696] *** ERROR => MsIAttachEx: NiBufConnect to epsystem/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 3696] *** WARNING => Can't reconnect to message server (epsystem/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 3696] Thu Jul 07 09:47:26 2005
[Thr 3696] *** ERROR => MsIAttachEx: NiBufConnect to epsystem/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 3696] *** WARNING => Can't reconnect to message server (epsystem/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 3696] Thu Jul 07 09:47:31 2005
[Thr 3696] JControlMSConnect: reconnected to message server (epsystem/3601)
[Thr 3696] Thu Jul 07 09:52:17 2005
[Thr 3696] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 3696] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 3696] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 3696] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 3696] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 3696] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 3696] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 3696] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 3696] Thu Jul 07 09:57:24 2005
[Thr 3696] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 3696] Thu Jul 07 10:02:25 2005
[Thr 3696] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 3696] Thu Jul 07 10:07:45 2005
[Thr 3696] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 3696] Thu Jul 07 10:12:46 2005
[Thr 3696] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 3696] Thu Jul 07 10:18:06 2005
[Thr 3696] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 3696] Thu Jul 07 10:23:07 2005
[Thr 3696] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 3696] Thu Jul 07 10:28:27 2005
[Thr 3696] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
(Same lines repeated for every 5 minutes)
MMC shows that all processes are running inclucing the message server
C:usrsapJ2EJC00j2eeclusterinstance.properties
ID5454400.ClassPath=./bin/boot/boot.jar:./bin/system/bytecode.jar:.
ID5454400.Debuggable=no
ID5454400.JLaunchParameters=
ID5454400.JavaParameters=-Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Djco.jarm=1 -XX:NewSize=28m -XX:MaxNewSize=28m Xms170m -XX:+DisableExplicitGC -Drdbms.driverLocation=C:/sapdb/programs/runtime/jar/sapdbc.jar -Dsys.global.dir=C:/usr/sap/J2E/SYS/global/
ID5454400.LogName=dispatcher
ID5454400.MainClass=com.sap.engine.boot.Start
ID5454400.MaxHeapSize=170
ID5454400.Name=dispatcher
ID5454400.Parameters=
ID5454400.RootPath=C:/usr/sap/J2E/JC00/j2ee/cluster/dispatcher
ID5454400.Type=dispatcher
ID5454450.ClassPath=./bin/boot/boot.jar:./bin/boot/jaas.jar:./bin/system/bytecode.jar:.
ID5454450.DebugMode=no
ID5454450.DebugPort=50021
ID5454450.Debuggable=no
ID5454450.JLaunchParameters=
ID5454450.JavaParameters=-Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -Dsun.io.useCanonCaches=false -Djava.awt.headless=true -XX:SoftRefLRUPolicyMSPerMB=1 -verbose:gc -XX:+PrintGCDetails -XX:+PrintGCTimeStamps -XX:+UseParNewGC -Xms512M -Xmx512M -XX:MaxNewSize=85M -XX:NewSize=85M -XX:+DisableExplicitGC -XX:MaxPermSize=192M -XX:PermSize=192M -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Drdbms.driverLocation=C:/sapdb/programs/runtime/jar/sapdbc.jar -Dsys.global.dir=C:/usr/sap/J2E/SYS/global/
ID5454450.LogName=server0
ID5454450.MainClass=com.sap.engine.boot.Start
ID5454450.MaxHeapSize=512
ID5454450.Name=server0
ID5454450.Parameters=
ID5454450.RootPath=C:/usr/sap/J2E/JC00/j2ee/cluster/server0
ID5454450.Type=server
bootstrap.ClassPath=./bootstrap/launcher.jar
bootstrap.JavaParameters=-Djco.jarm=1 -Djco.jarm=1
bootstrap.MainClass=com.sap.engine.offline.OfflineToolStart
bootstrap.MaxHeapSize=128
bootstrap.Name=bootstrap
bootstrap.Parameters=com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0054544
bootstrap.RootPath=C:/usr/sap/J2E/JC00/j2ee/cluster
bootstrap.Type=bootstrap
bootstrap_ID5454400.ClassPath=./bootstrap/launcher.jar
bootstrap_ID5454400.JLaunchParameters=
bootstrap_ID5454400.JavaParameters=-Djco.jarm=1 -Djco.jarm=1
bootstrap_ID5454400.MainClass=com.sap.engine.offline.OfflineToolStart
bootstrap_ID5454400.MaxHeapSize=170
bootstrap_ID5454400.Name=dispatcher bootstrap
bootstrap_ID5454400.Parameters=com.sap.engine.bootstrap.Bootstrap ./bootstrap ID005454400
bootstrap_ID5454400.RootPath=C:/usr/sap/J2E/JC00/j2ee/cluster
bootstrap_ID5454400.Type=bootstrap
bootstrap_ID5454450.ClassPath=./bootstrap/launcher.jar
bootstrap_ID5454450.JLaunchParameters=
bootstrap_ID5454450.JavaParameters=-Djco.jarm=1 -Djco.jarm=1
bootstrap_ID5454450.MainClass=com.sap.engine.offline.OfflineToolStart
bootstrap_ID5454450.MaxHeapSize=512
bootstrap_ID5454450.Name=server0 bootstrap
bootstrap_ID5454450.Parameters=com.sap.engine.bootstrap.Bootstrap ./bootstrap ID005454450
bootstrap_ID5454450.RootPath=C:/usr/sap/J2E/JC00/j2ee/cluster
bootstrap_ID5454450.Type=bootstrap
instance.enabled=yes
instance.install.dir=C:usrsapJ2EJC00j2ee
instance.ms.host=epsystem
instance.ms.port=3601
instance.osLibsPath=C:/usr/sap/J2E/JC00/j2ee/os_libs
instance.runAction=NONE
instance.runMode=NORMAL
<i>syslog</i> has lot of error messages:
SAP Basis System: Operating system call           recv failed (error no. 10054)
When I counter this problem, I uninstalled and installed again. Still same problem persists.
Any ideas?
Thanks

Real problem is log is full.
To overwrite the log files run this:
dbmcli [-n <hostname>] -d <databasename> -u <dbmuser>,<dbmuserpw> util_execute set log auto overwrite on
Default MaxDB installation accepts (control, control) for (username, passwd)
How to overwrite/remove log files?

When Starting OC4J, why the report server doesn't start automatically? !!

Dear All,
I have DS 10g on my system and I start the OC4J when I have to run either forms or reports.
But when I attend to start the do the following command from the form:
WEB.SHOWDOCUMENT(..../getjobid<jobid>?server=<servername>...), I have an error: FRM-41213: Unable to connect to the report server <servername>.
I noticed that if I run the following URL:http://<server>:.../reports/rwservlet, it gives me a list of command, but the server still not running..But if I add any command to the above URL like for example "getserverinfo" or "showjobs" then the server is started. Now, and after the command, if we return back and we run the report from the form, the report will run successfully.
The question WHY??
Regards,
Joe
Message was edited by: Joe
Joe Farah

Hello,
That's the way it works ...
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_strt.htm
2.1.3.1 Starting the In-process Server (Windows and UNIX)
If you are using Reports Server as an in-process server (the default configuration), sending a run report request starts the in-process server; however, if you are sending a request through a command line, the servlet must be invoked first using either the run report URL or the Web command URL. When you have successfully started the servlet, this also means you have successfully started the in-process server.
If you use "Oracle Application Server", the "in-process" reports server will be started automatically by opmn ...
Regards

Reports server doesn't start after upgrade 11.1.1.2 - 11.1.1.6

Hello,
I've upgraded a Linux server from Weblogic 10.3.2 / Forms 11.1.1.2 to Weblogic 10.3.6 / Forms 11.1.1.6 and I have some problems with reports server.
I can't use jobStatusRepository on my reports server.
I've created a new one, and when I activate the Job Status Repository, server can't start.
I've added this features from Enterprise Manager and I've build a new credential (I first have tried to redefine old ones).
When I modify my rwserver.conf adding comments to jobStatusRepository section, my report server start (from opmnctl or from Enterprise Manager) but as soon I put on line the jobStatusRepository, it fails to start.
My server is an Oracle Linux 5.
I've done the same on another server (same releases) and it does the same ...
Thanks for any help.
Xavier Cabantous

Hello,
thanks for your reply.
I've put level TRACE:32in traces but there is nothing interesting in log files :
in console~rep11_nodhos~1.log =>
12/06/09 21:02:10 Start process
9 juin 2012 21:02:13 oracle.security.jps.internal.common.util.XmlSchemaValidationUtil$StrictErrorHandler warning
ATTENTION: Echec de la validation du contenu XML. SchemaLocation: schemaLocation value = 'http://xmlns.oracle.com/oracleas/schema/11/jps-config-11_1.xsd' must have even number of URI's. Emplacement : line 2 column 272.
but I've seen in other topics that we don't have to care to this Warning.
in rwserver_diagnostic.log =>
no errors messages, it ends with
[2012-06-09T21:02:13.483+02:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 10] [ecid: 0000JVIc0PeFw000jzwkno1Fotqn000001,0] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] Multicast:registerReceiver Packet handler registered
[2012-06-09T21:02:13.489+02:00] [reports] [NOTIFICATION:16] [] [oracle.reports.server] [tid: 10] [ecid: 0000JVIc0PeFw000jzwkno1Fotqn000001,0] ServerPacketHandler:start ServerPacketHandler started successfully
I just have opened a SR on MetaLink

Endeca Server doesn't start

Hi,
I'm using OEID 3.0 on an Oracle Linux virtual machine. Two days ago I've experienced an issue with Endeca Server: when I start the endeca server domain, launching the $ENDECA_DOMAIN/bin/startWebLogic.sh script the domain starts, but in the standard output I can see this error message:
<17-lug-2013 11.03.18 CEST> <Warning> <com.endeca.opmodel.control.ClusterCoordinator> <OES-000056> <OES-000056: ClusterCoordinator process ended. Automatically restarting>
1994415 [Thread-36-SendThread(localhost:2181)] INFO   [ClientCnxn] Opening socket connection to server localhost/127.0.0.1:2181
1994416 [Thread-36-SendThread(localhost:2181)] WARN   [ClientCnxn] Session 0x0 for server null, unexpected error, closing socket connection and attempting reconnect
java.net.ConnectException: Connection refused
at sun.nio.ch.SocketChannelImpl.checkConnect(Native Method)
at sun.nio.ch.SocketChannelImpl.finishConnect(SocketChannelImpl.java:599)
at org.apache.zookeeper.ClientCnxn$SendThread.run(ClientCnxn.java:1143)
1995685 [Thread-36-SendThread(localhost:2181)] INFO   [ClientCnxn] Opening socket connection to server localhost/127.0.0.1:2181
1995685 [Thread-36-SendThread(localhost:2181)] WARN   [ClientCnxn] Session 0x0 for server null, unexpected error, closing socket connection and attempting reconnect
java.net.ConnectException: Connection refused
at sun.nio.ch.SocketChannelImpl.checkConnect(Native Method)
at sun.nio.ch.SocketChannelImpl.finishConnect(SocketChannelImpl.java:599)
at org.apache.zookeeper.ClientCnxn$SendThread.run(ClientCnxn.java:1143)
<17-lug-2013 11.03.22 CEST> <Warning> <com.endeca.opmodel.control.ClusterCoordinator> <OES-000056> <OES-000056: ClusterCoordinator process ended. Automatically restarting>
1997172 [Thread-36-SendThread(localhost:2181)] INFO   [ClientCnxn] Opening socket connection to server localhost/127.0.0.1:2181
1997172 [Thread-36-SendThread(localhost:2181)] WARN   [ClientCnxn] Session 0x0 for server null, unexpected error, closing socket connection and attempting reconnect
This message is repeated endlessy and the server isn't active.
If I try to retrieve the list of data domains using the endeca-cmd command, the result is:
[oracle@testbi endeca-cmd]$ endeca-cmd list-dd
GRAVE: Error while invoking endpoint "http://localhost:7001/endeca-server/ws/manage" from client
endeca-cmd encountered a problem.
caused by:
The Endeca Server returned an error: OES-000075: Caught exception when starting Endeca Server: null
caused by:
OES-000075: Caught exception when starting Endeca Server: null
OES-000075: Caught exception when starting Endeca Server: null
But if I try to digit in my web browser the url http://192.168.2.16:7001/endeca-server/ws/manage?wsdl I can see that the web services are active and I can display the xml.
Can anyone help me please?
Best regards,
Samuele Scattolini

Hi Samuele,
Another issue might be related to the fact that you are running the deployment on a VM. Specifically, could it be that that the machines you were using aren't able to resolve the names to addresses? We've seen this on VM machines - they seem to have two names configured, one of which is resolvable externally and one of which is only resolvable locally. If this indeed is the case in your deployment, try the following:
1. Go to $MW_HOME/user_projects/domains/endeca_server_domain/config
2. Check the contents of the EndecaServer.properties file, on all machines on which the Endeca Server is deployed. Specifically, see how the host on which the Cluster Coordinator should be running is configured.
For example, in a three-node Endeca Server cluster, this line may read as in this example:
endeca-cluster-coordinator-hosts=host1,host2,host3
where host1, host2 and host3 are local host names of your machines.
It is possible that if your machine is configured with a fully qualified domain name, such as host1.us.oracle.com, but the EndecaServer.properties file lists this machine as host1, then, due to the fact that it is a VM, the name is not resolvable.
To see if this is the case, try changing this file to use another type of notation (say, switch from FQDN to a short name, or vice versa, depending on what is in your etc/hosts and ipconfig, and see if this works.
Hope this helps,
Here is a doc link about the EndecaServer.properties file: http://docs.oracle.com/cd/E37483_01/server.751/es_install/toc.htm#Changing%20settings%20in%20EndecaServer.properties
It applies to a data domain cluster, but even in a single-node deployment, the Cluster Coordinator is still running, on this same node, and thus its host must be resolvable.
Hope this helps,
Julia

Windows service of WWI server doesn't start

Hello all,
I'm installing a WWI generation server (EHSWWI32_26-20000084 on a Windows Server 2008 R2(SP1)) for ECC 6.0.
Now I have a problem with starting windows service.
I installed WWI in the following path.
E:\EHS\WWI
Word version is 2003.
The installation (CGSADM) is finished without problem, and the management server works fine.
But service EHS_WWISRV, which is a service of wwi generation server, fails to start with following messages.
<event log 1>
The initialization process for the EHS_WWISRV_ST1_ST1_01 service failed. Switching Desktop for Word failed!
<event log 2>
WWI started at: 08/03/11 10:48:37 as PID: 1132
Initialisation........start
Working dir is: E:\EHS\WWI
Current PATH is: C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;E:\EHS\WWI
Attaching service to desktop winsta0 / default
session: 0
window station: Service-0x0-e34639$, desktop: Default
Error opening window station winsta0
Windows-Error 5 in SetDesktop/OpenWindowStation: (null)
Error setting window station winsta0
Windows-Error 6 in SetDesktop/SetProcessWindowStation: (null)
Error Attaching service to desktop winsta0 / default
I have no idea what "Switching Desktop for Word failed!" means.
Does anybody know how to fix the error?
Thank you in advance for your support.
Regards,
Kazuma

I could fix the error.
SAP Note 580586 helped me.
WWIUSER wasn't a member of the administrators group, and that caused the error.
Thanks all.

[SOLVED][GNOME] Pulseaudio doesn't start

Hey,
On cinnamon, pulseaudio starts on startup but with gnome3.8/3.6 pulseaudio doesn't start.
I always need to start it manually via `pulseaudio --start`.
Does someone know how to fix this?
Thanks in advance!
Last edited by sh4nks (2013-05-01 07:04:20)

ijanos wrote:Run gnome-session-properties and enable "PulseAudio Sound System"
Thanks!
But there wasn't such an entry so I have to add by myself
If someone is curious how I added it..:
1. Run `gnome-session-propertiers`
2. Click on `Add`
3. Fill in
`Name` with `PulseAudio Sound System` or something like that and
`Command` with `start-pulseaudio-x11`
Thats it!
Last edited by sh4nks (2013-05-01 07:07:03)

My server doesn't start without monitor (UEFI system)

Hallo folks!
I have a problem with my new Gigabyte J1800N-D2H motherboard: the computer doesn't start if there is no screens at the startup.
I can't find any log about this fact...
I can't connect with ssh, ping doesn't pong and there aren't R/ARP packages on the lan.
Also I didn't find any option into UEFI system.
What I could check?
Thanks all
Last edited by the9ull (2014-10-08 08:03:37)

jasonwryan wrote:
Can you more accurately describe the problem? You have sshd running, but when you boot if a monitor is not connected, you cannot ssh in?
What does "computer doesn't start" mean? Doesn't boot at all? Boots but chokes at some point?
I can't see where is the problem because the machine doesn't apprear online: no ssh, no ping; moreover, no logs were saved.
On the other hand, if the monitor is connected no errors are shown

Once again: j2ee server doesn't start :(

after installation it worked just perfect. yesterday something happened, no idea what, and now it doesn't want to start anymore.
it says: "Unable to create ORB. Possible causes include TCP/IP ports in use by another process". Well i tried to change it to 1049, 1051, 10590 and so on. No result: it doesn't like any other ports as well :(
did anybody had such a problem or has any idea what could it be?
thanks!
here is the complete error message:
C:\>j2ee -verbose
J2EE server listen port: 1050
org.omg.CORBA.INTERNAL:   minor code: 1398079697 completed: No
        at com.sun.corba.ee.internal.iiop.GIOPImpl.createListener(GIOPImpl.java:256)
        at com.sun.corba.ee.internal.iiop.GIOPImpl.getEndpoint(GIOPImpl.java:205)
        at com.sun.corba.ee.internal.iiop.GIOPImpl.initEndpoints(GIOPImpl.java:140)
        at com.sun.corba.ee.internal.POA.POAORB.getServerEndpoint(POAORB.java:488)
        at com.sun.corba.ee.internal.POA.POAImpl.pre_initialize(POAImpl.java:154)
        at com.sun.corba.ee.internal.POA.POAImpl.<init>(POAImpl.java:112)
        at com.sun.corba.ee.internal.POA.POAORB.makeRootPOA(POAORB.java:110)
        at com.sun.corba.ee.internal.POA.POAORB$1.evaluate(POAORB.java:128)
        at com.sun.corba.ee.internal.core.Future.evaluate(Future.java:21)
        at com.sun.corba.ee.internal.corba.ORB.resolveInitialReference(ORB.java:2421)
        at com.sun.corba.ee.internal.corba.ORB.resolve_initial_references(ORB.java:2356)
        at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:193)
        at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:913)
java.lang.RuntimeException: Unable to create ORB. Possible causes include TCP/IP ports in use by ano
ther process
        at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:203)
        at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:913)
java.lang.RuntimeException: Unable to create ORB. Possible causes include TCP/IP ports in use by ano
ther process
        at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:203)
        at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:913)
java.lang.RuntimeException: Unable to create ORB. Possible causes include TCP/IP ports in use by ano
ther process
        at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:350)
        at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:913)
J2EE server reported the following error: Unable to create ORB. Possible causes include TCP/IP ports
in use by another process
Error executing J2EE server ...

I had the same problem, and this hint solved it.
I changed the port number in setenv.bat.
from: http://docs.sun.com/source/816-4063/ffjee40_troubleshooting.html
This error occurs when another process is already using the 1050 listen port. You can either shut down the other process or change the port number assigned to J2EE Reference Implementation 1.3.1 to something other than 1050, for example, 11050. This error can also occur if the 1060 listen port is in use, even if the 1050 port is not in use. Do the following to correct the problem:
Determine whether the 1050 port is in use, the 1060 port is in use, or both are in use.
Change whichever is in use. To change the 1050 port assignment, you must modify the $J2EE_HOME\config\orb.properties file.To change the 1060 port assignment, use a text editor to modify the $J2EE_HOME\setenv.bat (for Microsoft Windows systems), or $J2EE_HOME/setenv.sh file (for Solaris or Red Hat Linux environments).

[Solved] X-server doesn't start...

Similar Messages

Maybe you are looking for