[Solved] xf86-video-ati driver and [Radeon Mobility 7500] help
I have an thinkpad T42 laptop (video card is ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]) with openbox and slim and I instaled xf86-video-ati. My problem is that minimizing and maximizing are very slow, lxterminal decoration bar disapear..... I also tried to install xf86-video-ati-git without any improuvements.
this is my xorg.conf:
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "SynapticsTouchpad" "SendCoreEvents"
InputDevice "Keyboard0" "CoreKeyboard"
Option "AIGLX" "true
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "False"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
# FontPath "/usr/share/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
# FontPath "/usr/share/fonts/cyrillic"
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/share/fonts/Type1"
# FontPath "/usr/share/fonts/ttf/western"
# FontPath "/usr/share/fonts/ttf/decoratives"
# FontPath "/usr/share/fonts/truetype"
# FontPath "/usr/share/fonts/truetype/openoffice"
# FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
# FontPath "/usr/share/fonts/latex-ttf-fonts"
# FontPath "/usr/share/fonts/defoma/CID"
# FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
Load "dbe"
Load "glx"
Load "dri2"
Load "dri"
Load "synaptics"
Load "extmod"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "CorePointer"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "on"
Option "YAxisMapping" "4 5"
Option "XAxisMapping" "6 7"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "SynapticsTouchpad"
Driver "synaptics"
Option "AlwaysCore" "true" # send events to CorePointer
Option "VertEdgeScroll" "true" # enable vertical scroll zone
EndSection
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
# 640x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
# 720x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
# 640x480 @ 72Hz (VESA) hsync: 37.9kHz
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
# 640x480 @ 75Hz (VESA) hsync: 37.5kHz
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
# 640x480 @ 85Hz (VESA) hsync: 43.3kHz
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
# 800x600 @ 56Hz (VESA) hsync: 35.2kHz
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
# 800x600 @ 60Hz (VESA) hsync: 37.9kHz
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
# 800x600 @ 72Hz (VESA) hsync: 48.1kHz
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
# 800x600 @ 75Hz (VESA) hsync: 46.9kHz
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
# 800x600 @ 85Hz (VESA) hsync: 53.7kHz
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
# Extended modelines with GTF timings
# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
EndSection
Section "Device"
Identifier "Card0"
Boardname "ATI Radeon"
Busid "PCI:1:0:0"
Driver "radeon"
Screen 0
Vendorname "ATI"
Option "MergedFB" "off"
Option "AccelMethod" "EXA"
Option "EXANoComposite" "false"
Option "FBTexPercent" "50"
Option "MigrationHeuristic" "greedy"
Option "DRI" "true"
Option "GARTSize" "1536"
Option "AGPMode" "4"
Option "Colortiling" "On"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Last edited by botzoboy (2010-05-29 07:39:30)
theapodan
this is my Xorg.0.log:
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-ARCH i686
Current Operating System: Linux arch 2.6.33-ARCH #1 SMP PREEMPT Thu May 13 12:06:25 CEST 2010 i686
Kernel command line: root=/dev/disk/by-uuid/7e750225-da5a-470f-a024-af37495f11d5 ro
Build Date: 01 April 2010 05:35:33PM
Current version of pixman: 0.18.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat May 29 09:20:42 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "SynapticsTouchpad"
(**) |-->Input Device "Keyboard0"
(**) Option "AIGLX" "true"
(**) Option "AutoAddDevices" "False"
(**) Not automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/100dpi,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(II) Loader magic: 0x81e4c60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:1:0:0) 1002:4c57:1014:0530 ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500] rev 0, Mem @ 0xe0000000/134217728, 0xc0100000/65536, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(**) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.2.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 6.12.192
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.7.0.901, module version = 1.5.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) LoadModule: "synaptics"
(II) Reloading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.7.0.901, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750,
ATI M98, ATI M98, ATI M98, ATI Mobility Radeon HD 4650,
ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
ATI FirePro M5750, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4290,
CYPRESS, ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5900 Series, ATI Radeon HD 5900 Series,
ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 5700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, CEDAR, CEDAR, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, CEDAR, ATI Radeon HD 5450,
CEDAR
(II) Primary Device is: PCI 01@00:00:0
(II) [KMS] Kernel modesetting enabled.
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "ColorTiling" "On"
(**) RADEON(0): Option "AccelMethod" "EXA"
(**) RADEON(0): Option "DRI" "true"
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon Mobility M7 LW (AGP)" (ChipID = 0x4c57)
(II) RADEON(0): AGP card detected
(II) RADEON(0): KMS Color Tiling: enabled
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): Output VGA-0 using monitor section Monitor0
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output DVI-0 disconnected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output S-video disconnected
(II) RADEON(0): Using user preference for initial modes
(II) RADEON(0): Output LVDS using initial mode 1024x768
(II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) RADEON(0): mem size init: gart size :fdff000 vram size: s:2000000 visible:1f00000
(II) RADEON(0): EXA: Driver will not allow EXA pixmaps in VRAM
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules/libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 2.5.0
ABI class: X.Org Video Driver, version 6.0
(--) Depth 24 pixmap format is 32 bpp
(II) RADEON(0): [DRI2] Setup complete
(II) RADEON(0): Front buffer size: 3072K
(II) RADEON(0): VRAM usage limit set to 25804K
(==) RADEON(0): Backing store disabled
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Render acceleration enabled for R100 type cards.
(II) RADEON(0): Setting EXA maxPitchBytes
(**) RADEON(0): Option "MigrationHeuristic" "greedy"
(**) RADEON(0): Option "EXANoComposite" "false"
(II) EXA(0): Driver allocated offscreen pixmaps
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(II) UploadToScreen
(II) DownloadFromScreen
(II) RADEON(0): Acceleration enabled
(**) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Set up textured video
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(WW) RADEON(0): Option "MergedFB" is not used
(WW) RADEON(0): Option "FBTexPercent" is not used
(WW) RADEON(0): Option "GARTSize" is not used
(WW) RADEON(0): Option "AGPMode" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/radeon_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 270 x 203
(**) Option "Protocol" "ExplorerPS/2"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "on"
(**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 9
(**) Mouse0: Sensitivity: 1
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(**) Mouse0: (accel) keeping acceleration scheme 1
(**) Mouse0: (accel) acceleration profile 0
(II) Mouse0: ps2EnableDataReporting: succeeded
(II) Synaptics touchpad driver version 1.2.1
(--) SynapticsTouchpad auto-dev sets device to /dev/input/event7
(**) Option "Device" "/dev/input/event7"
(II) SynapticsTouchpad: x-axis range 1472 - 5472
(II) SynapticsTouchpad: y-axis range 1408 - 4448
(II) SynapticsTouchpad: pressure range 0 - 255
(II) SynapticsTouchpad: finger width range 0 - 0
(II) SynapticsTouchpad: buttons: left right double triple
(**) Option "VertEdgeScroll" "true"
(--) SynapticsTouchpad: touchpad found
(**) Option "AlwaysCore" "true"
(**) Option "SendCoreEvents"
(**) SynapticsTouchpad: always reports core events
(II) XINPUT: Adding extended input device "SynapticsTouchpad" (type: TOUCHPAD)
(**) SynapticsTouchpad: (accel) keeping acceleration scheme 1
(**) SynapticsTouchpad: (accel) acceleration profile 0
(--) SynapticsTouchpad: touchpad found
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "XkbRules" "base"
(**) Keyboard0: XkbRules: "base"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) config/hal: Adding input device TPPS/2 IBM TrackPoint
(II) AutoAddDevices is off - not adding device.
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device ThinkPad Extra Buttons
(II) AutoAddDevices is off - not adding device.
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) AutoAddDevices is off - not adding device.
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) AutoAddDevices is off - not adding device.
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) AutoAddDevices is off - not adding device.
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Sleep Button
(II) AutoAddDevices is off - not adding device.
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Video Bus
(II) AutoAddDevices is off - not adding device.
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Power Button
(II) AutoAddDevices is off - not adding device.
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) Mouse0: ps2EnableDataReporting: succeeded
(--) SynapticsTouchpad: touchpad found
Similar Messages
-
Xorg, xf86-video-ati - no OpenGL rendering [Mobility Radeon HD 5000]
Hello
I got a new laptop (Asus b53j, EU version with an i3 - should be same hardware otherwise) and of course it needs to run Arch, or it'll slowly rust.
It has an option to switch the graphics card in Windows (From Intel to ATI Mobility Radeon HD 5000 Series), which I guess might have something to do with this issue.
I'm unable to get any OpenGL rendering working, using the xf86-video-ati driver.
lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 18)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:19.0 Ethernet controller: Intel Corporation 82577LM Gigabit Network Connection (rev 06)
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06)
00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 06)
00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series]
01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series]
03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6200 (rev 35)
3f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05)
3f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05)
3f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05)
3f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05)
3f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05)
3f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05)
xorg log (grep WW): Full log here http://codepad.org/FkQBzGoq
[ 3838.156] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 3838.156] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 3838.157] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 3838.425] (WW) RADEON(0): Direct rendering disabled
[ 3838.428] (WW) RADEON(0): Option "DynamicPM" is not used
[ 3838.428] (WW) RADEON(0): Option "ClockGating" is not used
[ 3838.428] (WW) RADEON(0): Option "DMAForXv" is not used
[ 3838.428] (WW) RADEON(0): Option "ScalerWidth" is not used
glxinfo | grep -i direct
direct rendering: Yes
glxinfo | grep -i opengl
OpenGL vendor string: Mesa Project
OpenGL renderer string: Software Rasterizer
OpenGL version string: 2.1 Mesa 7.10
OpenGL shading language version string: 1.20
OpenGL extensions:
20-radeon.conf
Section "Device"
Identifier "ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series"
Driver "radeon"
Option "DRI" "on" # ?
Option "DynamicPM" "on" # Dynamic powersaving.
Option "ClockGating" "on" # Assisting option for powersaving.
Option "AccelMethod" "EXA" # EXA should fit most cases.
Option "EXAVSync" "on" # EXAVSync is explained above.
Option "DMAForXv" "on" # Forced option in order to enable Xv overlay.
Option "ScalerWidth" "2048" # That should fix some very rare bugs.
Option "EnablePageFlip" "on" # It will not be enabled on R5xx cards.
Option "RenderAccel" "on" # Optional. It should be enabled by default.
Option "AccelDFS" "on" # Optional. See the man page.
BusID "PCI:1:0:0"
EndSection
No custom xorg.conf file, only a 20-radeon.conf file in /etc/X11/xorg.conf.d/, but I tried removing this also.
dmesg log: http://codepad.org/WNELOXjo
Thanks for any help.
Last edited by valvet (2011-01-31 21:24:15)Gusar wrote:
(II) RADEON(0): GPU accel disabled or not working, using shadowfb for KMS
^ There's your issue. Just a wild guess: are you in the video group? And another one: do you have the linux-firmware package installed?
Yes to both :-(.
disk wheel http hal video audio optical storage power users
Name : linux-firmware
Version : 20101108-1
URL : http://git.kernel.org/?p=linux/kernel/git/dwmw2/linux-firmware.git;a=summary
Licenses : GPL2 GPL3 custom
Groups : None
Provides : kernel26-firmware=2.6.34.99
Depends On : None
Optional Deps : None
Required By : kernel26
Conflicts With : linux-firmware-git kernel26-firmware ar9170-fw iwlwifi-1000-ucode iwlwifi-3945-ucode iwlwifi-4965-ucode iwlwifi-5000-ucode iwlwifi-5150-ucode iwlwifi-6000-ucode
rt2870usb-fw rt2x00-rt61-fw rt2x00-rt71w-fw
Replaces : kernel26-firmware ar9170-fw iwlwifi-1000-ucode iwlwifi-3945-ucode iwlwifi-4965-ucode iwlwifi-5000-ucode iwlwifi-5150-ucode iwlwifi-6000-ucode rt2870usb-fw
rt2x00-rt61-fw rt2x00-rt71w-fw
Installed Size : 21232,00 K
Packager : Thomas Bächler <[email protected]>
Architecture : any
Build Date : 2010-11-08T23:31:43 CET
Install Date : 2011-01-31T17:04:52 CET
Install Reason : Explicitly installed
Install Script : No
Description : Firmware files for Linux
I wonder why it's telling me it's disabled or not working.. hrm. -
Ati-driver config wth Rage mobile [SOLVED: xf86-video-ati]
[sorry, double-posted in contributions board]
I take the opportunity to thank cerebral & iphitus for all the hard work they've done in providing nice & workin with Xorg7 ati-drivers to a lot of guys
Even so, I can't get them to load on my small Dell Latitude L400 laptop.
- I installed Xorg7 strictly following the (brand) new wiki, then configured xorg.conf (adding synaptics & giving Xorg -configure a try).
- Installed ati-drivers & ~-arch (8.22.5-3 & ~-2), but when I wanna load fglrx, here's what I get :
# modprobe fglrx
FATAL: Error inserting fglrx (/lib/modules/2.6.15-ARCH/video/fglrx.ko): No such device
Adding fglrx to rc.conf (also tried to add to mkinitrd.conf "ADD_MODULE=") didn't help, showing the very same message @ boot time.
Also launched aticonfig --initial --input=/etc/X11/xorg.conf but X still did not start.
Any help would be very welcome.
hwd -s
Video : ATI|Rage Mobility P/M AGP 2x server: XFree86 (vesa)
Actual Device section (Vesa's workin, very slowly, but not fglrx) :
Section "Device"
Driver "vesa"
Identifier "Card0"
VendorName "ATI Technologies Inc"
BoardName "Rage Mobility P/M AGP 2x"
BusID "PCI:1:0:0"
EndSection
#Section "Device"
# Identifier "ATI Graphics Adapter 0"
# Driver "fglrx"
# BusID "PCI:1:0:0"
#EndSection
Former (workin great) Xorg-6.8 xorg.conf showed
Section "Device"
Identifier "Card0"
Driver "ati"
VendorName "All"
BoardName "All"
EndSectiongot it bpisciot
(actually Saturday i'm going to the mountains for a few days with my beloved & was thinking that running ati video proprietary drivers might help the
small P3 to play videos nicely in the evening )
EDIT :
Cerebral wrote:kozaki: the ati-drivers packages in [extra] only support radeon cards, not rage.
You'll have to stick with xf86-video-ati and your old xorg.conf device section. -
Radeon Mobility HD 4650 / xf86-video-ati driver problem
Hi everyone,
I am under Archlinux with my laptop (Asus N81vp) since a year, and i've got this problem since the begining. With the radeon driver installed, my X work well but the fan of my card is screaming and my laptop anormaly hot. I do not have this problem under Windows or with the catalyst driver (witch is working). I really want to use the radeon, more maintained (and free ^^).
I cannot have the temperature and the state of the fan, my ic2 chips aren't recognized by lm-sensors...
I really don't know where the problem is : if anyone have a Radeon mobility HD 4650, i would like to know if they have the same problem or a solution. Maybe it's a bug of the driver, or a configuration problem...
Anyway, if anyone have a solution, i googlize it for hours, and this problem outclass my knowledge...
Here's a bit of my hardware and configs files. I you want more, tell me
Thanx in advance (and i'm sorry if my english sucks, i'm from France ...)
uname -r
2.6.39-ARCH
Version de xf86-video-ati : 6.14.2-1 (Testing)
I do not have a xorg.conf
[arsenik@Spartakus ~]$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc M96 [Mobility Radeon HD 4650]
01:00.1 Audio device: ATI Technologies Inc RV710/730
03:00.0 Network controller: Intel Corporation WiFi Link 5100
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
07:03.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
07:03.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
07:03.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
07:03.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
dmesg
http://pastebin.com/nmZYeTKf
/etc/rc.conf
http://pastebin.com/v6q4LQD4
Last edited by Spartakus (2011-07-19 18:30:40)As far as I know, the open source driver simply churns through quite a bit more power than catalyst when idling. The higher core temperature is the unfortunate direct result of this.
I'm using xf86-video-ati 6.14.2-1 too, but with a Radeon Mobility HD4570 (which is detected by lm-sensors, by the way). With the default driver settings (highest power state), I see core temperatures as high as 88 degrees C when doing nothing. I've added
echo mid > /sys/class/drm/card0/device/power_profile
to /etc/rc.local as a workaround for the issue. This basically forces a lower power mode than default at boot. Currently, my GPU idles at 64 degrees C, which is sort of acceptable in my opinion. The obvious side effect of this workaround is that your graphics performance goes down, which I'd even notice in Gnome 3's transitions (not being as smooth as before).
This page may be relevant to your interests: https://wiki.archlinux.org/index.php/ATI#Powersaving -
[SOLVED]Swapping from xf86-video-ati driver to catalyst
Hey everyone,
So as the title implies, I need some help on this. I tried doing a pacman -R xf86-video-ati, then setting my xorg over to vesa as the driver prior to installing the catalyst driver. That part went fine. Installed catalyst which updated my xorg accordingly. Rebooted, and X won't load. So per ATI's instructions, I removed the catalyst driver, reloaded, did a new xorg - configure and worked my way back to xf86-video-ati.
I would really like to get catalyst going. Where did I screw up on my first attempt? I saw somewhere on the forum that you can actually get 3d working with the xf86 driver, but I forgot to bookmark that thread lol. Here's a copy of my current xorg if it helps at all.
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dri2"
Load "extmod"
Load "FGL.renamed.libglx"
Load "dbe"
Load "FGL.renamed.libdri"
Load "glx"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 380 300 # mm
Identifier "Monitor0"
VendorName "SPT"
ModelName "X9WG-NagaV"
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # <i>
#Option "AGPMode" # <i>
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # <i>
#Option "GARTSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # <i>
#Option "DepthBits" # <i>
#Option "PCIAPERSize" # <i>
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "CustomEDID" # [<str>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # <i>
#Option "RageTheatreCrystal" # <i>
#Option "RageTheatreTunerPort" # <i>
#Option "RageTheatreCompositePort" # <i>
#Option "RageTheatreSVideoPort" # <i>
#Option "TunerType" # <i>
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # <i>
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "ClockGating" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
#Option "R4xxATOM" # [<bool>]
#Option "ForceLowPowerMode" # [<bool>]
#Option "DynamicPM" # [<bool>]
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "760G [Radeon 3000]"
BusID "PCI:1:5:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Last edited by dissentiate (2009-12-27 05:41:59)dissentiate wrote:Is there something in particular about 1.7 version that might work for me?
It's not Xorg that is the issue. It's the Catalyst drivers, they only support up to Xorg 1.6.
So you will have to downgrade Xorg in order to use them.
I'm using the xf86-video-ati drivers myself on Xorg 1.7 with a HD4850, 2D works fine. Xv and especially 3D is a no-go so far, but my system has been running for just a day now, so i'm still setting up lots of things.
In the new kernel (2.6.32) there is KMS support for the Radeon HD3xxx and HD4xxx series. I'm hoping that will get the drm module working (fails to initialize over here), and i'm hoping that will bring me at least Xv support, so I can watch videos properly. The open-source ati driver does support it.
So if you can wait for that kernel to move from testing to core, that's what I would do before jumping into the Xorg 1.6 and Catalyst "jungle".
[Edit]
I got Xv working by disabling KMS tries by the kernel, using "nomodeset" in my kernel boot line.
OpenGL attempts (even glxgears) crashes
Last edited by Ultraman (2009-12-24 01:35:23) -
[SOLVED] xf86-video-ati 1:7.0.0.-1: segmentation fault
Hello,
just did a system upgrade (just xorg and xf86-video-ati were outdated) and with the newest radeon driver I can't start x. Manually recompiling the newest driver did not help, downgrading to 1:6.14.6-2 did.
Here is my xorg.log - any suggestions?
Greetings
matse
//Edit: Bug is also tracked in the distro bugtracker and upstream
//Edit2: Xorg-server 1.13.1 fixes the issue for me
Last edited by matse (2012-12-16 22:40:53)I have the exact same bug. I installed Arch yesterday and executing X resulted in radeon_drv.so segfault. Downgrading it didn't help, because modesetting_drv.so also segfaults. Instead the solution was to uninstall both xf86-video-ati and xf86-video-modesetting. The end result was that X ran with the intel driver and worked. My notebook configuration:
uname -a
Linux tarvalon 3.6.6-1-ARCH #1 SMP PREEMPT Mon Nov 5 11:57:22 CET 2012 x86_64 GNU/Linux
lspci -nn | grep VGA
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09)
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Whistler [AMD Radeon HD 6600M Series] [1002:6741]
dmesg | grep drm
[ 4.325849] [drm] Initialized drm 1.1.0 20060810
[ 4.470878] [drm] radeon defaulting to kernel modesetting.
[ 4.470880] [drm] radeon kernel modesetting enabled.
[ 4.471028] [drm] initializing kernel modesetting (TURKS 0x1002:0x6741 0x1028:0x04C5).
[ 4.471067] [drm] register mmio base: 0xE1700000
[ 4.471068] [drm] register mmio size: 131072
[ 4.531897] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 4.531900] [drm] RAM width 128bits DDR
[ 4.531970] [drm] radeon: 1024M of VRAM memory ready
[ 4.531971] [drm] radeon: 512M of GTT memory ready.
[ 4.531986] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 4.531987] [drm] Driver supports precise vblank timestamp query.
[ 4.532086] [drm] radeon: irq initialized.
[ 4.532090] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 4.532370] [drm] probing gen 2 caps for device 8086:101 = 2/0
[ 4.532371] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 4.532429] [drm] Loading TURKS Microcode
[ 5.132336] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 5.148880] [drm] ring test on 0 succeeded in 3 usecs
[ 5.149103] [drm] ib test on ring 0 succeeded in 0 usecs
[ 5.149255] [drm] Radeon Display Connectors
[ 5.154101] [drm] Internal thermal controller without fan control
[ 5.154948] [drm] radeon: power management initialized
[ 5.155076] [drm] Cannot find any crtc or sizes - going 1024x768
[ 5.155961] [drm] fb mappable at 0xC0142000
[ 5.155962] [drm] vram apper at 0xC0000000
[ 5.155962] [drm] size 3145728
[ 5.155963] [drm] fb depth is 24
[ 5.155963] [drm] pitch is 4096
[ 5.159065] fb0: radeondrmfb frame buffer device
[ 5.159065] drm: registered panic notifier
[ 5.159068] [drm] Initialized radeon 2.24.0 20080528 for 0000:01:00.0 on minor 0
[ 5.478361] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.478361] [drm] Driver supports precise vblank timestamp query.
[ 5.996280] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 6.259675] fbcon: inteldrmfb (fb1) is primary device
[ 6.721495] fb1: inteldrmfb frame buffer device
[ 6.725192] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 1
lsmod | grep drm
drm_kms_helper 32877 2 i915,radeon
drm 218724 6 ttm,i915,drm_kms_helper,radeon
i2c_core 20707 7 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,radeon,videodev -
[Solved] xf86-video-ati install problem
I've just downgraded xorg because I was having problems with the recent upgrade, and its working fine now, but I can't install xf86-video-ati. I get the following error:
error: failed to commit transaction (conflicting files)
xf86-video-ati: /usr/lib/xorg/modules/drivers/ati_drv.so exists in filesystem
xf86-video-ati: /usr/lib/xorg/modules/drivers/radeon_drv.so exists in filesystem
xf86-video-ati: /usr/lib/xorg/modules/multimedia/theatre200_drv.so exists in filesystem
xf86-video-ati: /usr/lib/xorg/modules/multimedia/theatre_detect_drv.so exists in filesystem
xf86-video-ati: /usr/lib/xorg/modules/multimedia/theatre_drv.so exists in filesystem
xf86-video-ati: /usr/share/licenses/xf86-video-ati/LICENSE exists in filesystem
xf86-video-ati: /usr/share/man/man4/ati.4.gz exists in filesystem
xf86-video-ati: /usr/share/man/man4/radeon.4.gz exists in filesystem
Errors occurred, no packages were upgraded.
I'm installing xf86-video-ati-6.12.4-1 from http://arm.kh.nu/old/extra/os/i686/.
xorg-server version is 1.6.3.901-1.
Last edited by ataylor (2009-11-05 18:29:32)From what I can see it looks like they are files from a previous xf86-video-ati installation, although I've no idea why they would be there since I removed it cleanly. I was thinking perhaps I should just force the install?
-
[Solved] xf86-video-ati low fps under normal user, fine under root
Hi again. someone must had played HL1. So did I, but I had to run it under root to get the sufficient performance. I tried both OpenGL and DirectX drivers.
At 640x480 the FPS is ~5. At 1024x768 it's "1".
after some digging I found that glxinfo produces different output for me and for root:
# glxinfo
OpenGL vendor string: Mesa Project
OpenGL renderer string: Software Rasterizer
# sudo glxinfo
OpenGL vendor string: DRI R300 Project
OpenGL renderer string: Mesa DRI R300 20060815 x86/MMX/SSE2 TCL
How do I permit the normal user to utilize HW acceleration?
wine-1.1.26
xf86-video-ati 6.12.2
xorg-server 1.6.2
Last edited by leniviy (2009-08-01 11:14:16)Is your user added to the video group?
-
Problem with a new install: X, Radeon 4650, and xf86-video-ati
Hi guys,
I am trying to setup a new install here but am getting stuck at X (I have been following the beginners guide).
Everything is stock (kernel, not [testing], etc.).
I have a ATI Radeon HD 4650 and am using the xf86-video-ati driver. I want to use dual monitors with this card (one 1920x1080 and another 1680x1050), but as far as I can tell, this is not the root of the problem. KMS is enabled by default and works well (with the exception of some slight artifacts on the 1080p monitor). I have tried to disable KMS but to no avail. But here is the essence of my situtaion:
Note: Yes, hal & dbus are both running.
Running X as root without Xorg.conf: Mirrored at 1680x1050
Running X as root with Xorg.conf: Black screens
Running X as normal without Xorg.conf: Mirrored at 1680x1050
Running X as normal with Xorg.conf: Black screens
Note: The Xorg.conf is being taken from X -configure as well as taken from Xorg.0.log
My /var/log/Xorg.0.log can be found here: http://pastebin.ca/1877044 (after attempting to run X as a normal user without Xorg.conf)
Why can't I use a xorg.conf? How can I setup dual displays at their native resolutions?
Thanks, any help is greatly appreciated!oh boy ...been in your exact situation before. I have a radeon 4890 HD. Very easy to get running the way you want it, once you know the steps to take of course.
btw, I've ALWAYS found it easier to run X with an xorg.conf file.
The way you go about setting up a dual head radeon card is actually very simple.
First, delete your /etc/X11/xorg.conf file if you have one.
Second, run "sudo aticonfig --initial=dual-head"
Third, make sure the fglrx module is mentioned in your rc.conf file under modules.
aticonfig will then create a new xorg.conf file for you that will work with your dual head.
A few tweaks to the xorg.conf file before you start x:
Decide whether you would like to run Xinerama or not. Xinerama may or may not have any benefits, but I've had much more success by keeping it off.
You do that by:
Section "ServerFlags"
Option "Xinerama" "off"
EndSection
Make sure 'Load "dri2"' and 'Load "dri"' are commented out under section 'module'
Lastly, specify your display size under Section "Screen" (you should have two screen sections)
Do this by adding Modes "1920x1080" under each SubSection "Display" .... or just take a shortcut and put it under the last subsection like I did.
Do it again for the your other screen section.
You are going to make a "virtual" screen, which would exist if your two physical screens were joined into one big one.
So put under your second "screen" section, Virtual 3360 3360 (I have two 1680x1050 monitors)
attatched is my xorg.conf for clarification:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "aticonfig-Screen[0]-0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
# Load "dri2"
# Load "dri"
Load "record"
Load "extmod"
Load "glx"
Load "dbe"
EndSection
Section "ServerFlags"
Option "Xinerama" "off"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "0-DFP1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1680x1050"
Option "TargetRefresh" "60"
Option "Position" "1680 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Monitor"
Identifier "0-DFP2"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1680x1050"
Option "TargetRefresh" "60"
Option "Position" "0 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # [<str>]
#Option "offscreensize" # [<str>]
#Option "SWcursor" # [<bool>]
#Option "ignoreconnector" # [<str>]
#Option "forcereduced" # [<bool>]
#Option "forcedpi" # <i>
#Option "useconfiguredmonitor" # [<bool>]
#Option "HPD" # <str>
#Option "NoRandr" # [<bool>]
#Option "RROutputOrder" # [<str>]
#Option "DRI" # [<bool>]
#Option "TVMode" # [<str>]
#Option "ScaleType" # [<str>]
#Option "UseAtomBIOS" # [<bool>]
#Option "AtomBIOS" # [<str>]
#Option "UnverifiedFeatures" # [<bool>]
#Option "Audio" # [<bool>]
#Option "AudioStreamSilence" # [<str>]
#Option "HDMI" # [<str>]
#Option "COHERENT" # [<str>]
#Option "ForceLowPowerMode" # [<bool>]
#Option "LowPowerModeEngineClock" # <i>
Identifier "Card0"
Driver "radeonhd"
VendorName "ATI Technologies Inc"
BoardName "RV790 [Radeon HD 4800 Series]"
BusID "PCI:2:0:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
Option "Monitor-DFP1" "0-DFP1"
Option "Monitor-DFP2" "0-DFP2"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1680x1050"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Virtual 3360 3360
Depth 24
Modes "1680x1050"
EndSubSection
EndSection -
It's all green with xf86-video-ati. [Solved]
Firstly, I am running an updated install of Arch with KDE. My graphics card is an ATI Radeon HD 4800
After following the directions on the wiki (http://wiki.archlinux.org/index.php/ATI), my entire screen is shaded dark green. I can see things through it, bit it makes changes difficult.
Before the problem, I enabled early start KMS as per the directions, this did not seem to affect anything after a restart or two.
I moved on to generating a xorg.conf file using HWD and configuring it to use xf86-video-ati. Upon running hwd -x, I found it odd that it only generated a xorg.conf.mesa file, but assumed that I could make the changes that I wanted myself. I made a copy of the generated configuration file and named it xorg.conf and began editing. At this point in time, my computer was green screen free. The default generated config file worked fine using mesa, but I wanted to utilize my GPU. I found the "Devices" section and commented out:
Driver "vesa"
and added
Driver "radeon"
This is where my problems began. Upon rebooting, I was presented with a green KDM. Logging in or switching consoles did nothing to save me from my newly made green Frankenstein computer. So, I renamed my xorg.conf file to xorg.conf.bak and rebooted. Everything was back to normal (no green, no xorg.conf). I checked my Xorg.0.log file, but couldn't make out any errors. I've included my xorg.conf file as well as my the last part of my log file to aid anyone brave enough to do battle with the green. It would be great if anyone could help me out with this, I think that I'm a bit in over my head. Also, I would use the proprietary catalyst drivers, but they don't yet support the newest version of xorg that I'm running. I've tested the catalyst drivers in other installs and the GPU works perfectly, so I'm positive that it isn't a hardware problem.
If there is any more information that I can provide, just let me know.
xorg.conf
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
# Serial Mouse not detected
# USB Mouse not detected
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
Option "AutoAddDevices" "False"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/share/fonts/cyrillic"
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
# Load "synaptics"
Load "drm"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
# Auto-generated by Archie mkxcfg
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
# 640x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
# 720x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
# 640x480 @ 72Hz (VESA) hsync: 37.9kHz
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
# 640x480 @ 75Hz (VESA) hsync: 37.5kHz
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
# 640x480 @ 85Hz (VESA) hsync: 43.3kHz
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
# 800x600 @ 56Hz (VESA) hsync: 35.2kHz
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
# 800x600 @ 60Hz (VESA) hsync: 37.9kHz
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
# 800x600 @ 72Hz (VESA) hsync: 48.1kHz
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
# 800x600 @ 75Hz (VESA) hsync: 46.9kHz
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
# 800x600 @ 85Hz (VESA) hsync: 53.7kHz
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
# 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
# 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
# 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
# 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
# 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
# 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
# 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
# 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
# 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
# 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
# Additional modelines
ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# Extended modelines with GTF timings
# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync
# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync
# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync
# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync
# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync
# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync
# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync
# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
EndSection
# Auto-generated by Archie mkxcfg
Section "Device"
Identifier "Card0"
#Driver "vesa"
Driver "radeon"
VendorName "All"
BoardName "All"
Option "AccelMethod" "EXA"
Option "RenderAccel" "on"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 16
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Xorg.0.log (not complete)
Dac detection success
(II) RADEON(0): Output: DVI-1, Detected Monitor Type: 0
Unhandled monitor type 0
(II) RADEON(0): EDID vendor "SAM", prod id 292
(II) RADEON(0): Using EDID range info for horizontal sync
(II) RADEON(0): Using EDID range info for vertical refresh
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: DVI-0 ----------------------
(II) RADEON(0): Manufacturer: SAM Model: 124 Serial#: 1296707895
(II) RADEON(0): Year: 2004 Week: 51
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) RADEON(0): Sync: Separate Composite
(II) RADEON(0): Max Image Size [cm]: horiz.: 34 vert.: 27
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.650 redY: 0.330 greenX: 0.330 greenY: 0.600
(II) RADEON(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x864@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz Image Size: 338 x 270 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: SyncMaster
(II) RADEON(0): Serial No: H9NXC27207
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff004c2d240137314a4d
(II) RADEON(0): 330e01036c221b782aaaa5a654549926
(II) RADEON(0): 145054bfef808180714f010101010101
(II) RADEON(0): 010101010101302a009851002a403070
(II) RADEON(0): 1300520e1100001e000000fd00384b1e
(II) RADEON(0): 510e000a202020202020000000fc0053
(II) RADEON(0): 796e634d61737465720a2020000000ff
(II) RADEON(0): 0048394e584332373230370a20200010
(II) RADEON(0): EDID vendor "SAM", prod id 292
Output CRT1 disable success
Blank CRTC 0 success
Disable CRTC memreq 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC memreq 1 success
Disable CRTC 1 success
Blank CRTC 0 success
Disable CRTC memreq 0 success
Disable CRTC 0 success
Output CRT1 disable success
Enable CRTC 0 success
Enable CRTC memreq 0 success
Unblank CRTC 0 success
Output CRT1 enable success
Last edited by ryeguy146 (2009-11-20 02:20:55)ryeguy146 wrote:
The proprietary driver doesn't yet support XOrg 7.5, so unless I want to rip out X and downgrade, that's out of the question. Hell, I don't even know where I'd get the source for 7.4 (latest supported) if I wanted it. MadTux suggests that ATI may be releasing the next version of the Catalyst soon, so maybe they'll support 7.5 with that. Maybe not. I don't have this problem using, say, ubuntu with the old XOrg.
The xf86-video-radeon gives me a black screen, so that's out, though I haven't tried either the xf86-video-radeon-git or the xf86-video-ati-git, I may just bust those out and see what it gets me.
Flamelab's suggestion seems plausable. Installing xf86-video-ati-git and using his xorg.conf sample; I'll try that out now and report back shortly.
Edit:
Well that's interesting. Trying flamelab's suggestion does seem to work perfectly. No green, no black screen, just good stuff. Glxgears runs nicely (which I assume is OpenGL). My xorg.conf is as follows:
Section "Device"
Identifier "My Graphics Card"
Driver "radeon"
Option "DRI" "on"
Option "AccelMethod" "EXA"
Option "DMAForXv" "on"
Option "RenderAccel" "on"
EndSection
So that's something. Compositing still doesn't wish to work, but I think that I'm getting to where I want to be. Thanks for the tip, M177ER.
In order to see 3D with xf86-video-ati-git or you'll wait for linux kernel 2.6.32 (coming soon), or you can build the -git versions of mesa,libgl,ati-dri, kernel etc which can cause trouble if you don't know what to do. See here if you have time : http://bbs.archlinux.org/viewtopic.php?id=79509
As for the PKGBUILD: Xorg-server is a bit strict with full xorg.conf files lately. So creating a lite xorg.conf, can solve most problems. -
[SOLVED] Configure dual head with different resolutions xf86-video-ati
I have 1680x1050 and 1280x1024 monitors which I would like to setup so that I have two displays (:0.0 and :0.1), i.e. can't drag a window to the other display, but can move the mouse from one screen to the next. The graphics card is Radeon HD 4850.
At the moment I have one screen only, so I can't move the mouse from the first to the second screen, it is captive in the first screen.
xrandr -q
Screen 0: minimum 320 x 200, current 1680 x 1050, maximum 1680 x 1680
HDMI-0 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 338mm x 270mm
1280x1024 60.0*+ 75.0
1280x960 60.0
1152x864 75.0 70.0
1024x768 75.0 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 75.0 72.8 66.7 59.9
720x400 70.1
VGA-0 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 338mm x 270mm
1280x1024 60.0*+ 75.0
1280x960 60.0
1152x864 75.0 70.0
1024x768 75.0 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 75.0 72.8 66.7 59.9
720x400 70.1
DVI-0 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 474mm x 296mm
1680x1050 60.0*+
1600x1200 60.0
1280x1024 75.0 60.0
1440x900 75.0 59.9
1280x960 60.0
1152x864 75.0
1280x720 60.0
1024x768 75.0 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 75.0 72.8 66.7 59.9
720x400 70.1
xorg.conf:
Section "ServerLayout"
Identifier "dual head configuration"
Screen 0 "Screen0" 0 0
Screen "Screen1" RightOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
EndSection
Section "Module"
Load "glx"
Load "dri"
Load "drm"
EndSection
Section "InputDevice"
# keyboard added by rhpxl
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "Monitor"
Identifier "Monitor0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
DisplaySize 444 277
EndSection
Section "Monitor"
Identifier "Monitor1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
DisplaySize 339 271
EndSection
Section "Device"
Identifier "Videocard0"
Driver "radeon"
BusID "PCI:2:0:0"
EndSection
Section "Device"
Identifier "Videocard1"
Driver "radeon"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1680x1050"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024"
EndSubSection
EndSection
Xorg.0.log:
(==) ServerLayout "dual head configuration"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Videocard0"
(**) |-->Screen "Screen1" (1)
(**) | |-->Monitor "Monitor1"
(**) | |-->Device "Videocard1"
(**) |-->Input Device "Keyboard0"
It doesn't look as if xrandr can help as it reports a maximum virtual desktop of 1680x1680.
Because the two monitors are different resolutions I don't know if a single screen is the answer.
I used to have two displays/screens configured to two different resolutions matching the monitors using the catalyst driver but can't get it working using the xf86-video-ati driver.
Any help would be appreciated.
Thanks
Willem
Last edited by Willem (2010-01-02 20:42:41)Thanks, with your help I was able to get it working.
The xorg.conf relevant sections:
Section "ServerLayout"
Identifier "dual head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Monitor"
Identifier "Monitor0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
DisplaySize 444 277
EndSection
Section "Monitor"
Identifier "Monitor1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
DisplaySize 339 271
Option "RightOf" "Monitor0"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "radeon"
BusID "PCI:2:0:0"
Option "Monitor-HDMI-0" "Monitor0"
Option "Monitor-DVI-0" "Monitor1"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Virtual 2960 1050
EndSubSection
EndSection
Would still be interested to get a seperate display for each monitor working though. -
Xf86-video-ati with S.Islands - do you like it?
Hi!
Some times ago I tried to use xf86-video-ati driver for my ATI AMD Radeon HD7870 card and it was not really comfortable due to hight card temperature even without hight video load.
Now we have xorg-server and catalyst-utils in conflict, so I am wondering should I try open source drivers again to keep system up to date. I do not need 3d, only composite effects, video and low temperature. May be now situation is better with S.I. support.
Is there any S.I. cards users with xf86-video-ati driver? What card do you have? Do you satisfied with composite and 2d performance with kwin and KDE? What is the temperature of your card? Right now I have 36 degrees without load according to aticonfig --odgt.
P.S. At first I thought I can just try xf86-video-ati for myself, but because of package conflict it will be now not so easy to go back. I would like not to deal with custom repos and/or package downgrades.I would wait at least another month to see what gets revealed (if anything) to the macbook product line. With the WIFI drops associated with current release I cannot recommend anything until then.
I would love to have a new macbook if it had an aluminum chassis like the Pro.
If you remember, they used to have the little 13" aluminum G4 which was a sweet little machine. -
[SOLVED] Mobility Radeon HD 5400 Series with xf86-video-ati
I have an hp laptop with the following VGA Devices:
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Manhattan [Mobility Radeon HD 5400 Series]
I installed:
xf86-video-ati 1:7.0.0-1
When I run:
Xorg -configure
I get:
[ 8983.828] (EE)
[ 8983.829] (EE) Backtrace:
[ 8983.830] (EE) 0: Xorg (xorg_backtrace+0x36) [0x58a426]
[ 8983.832] (EE) 1: Xorg (0x400000+0x18e279) [0x58e279]
[ 8983.833] (EE) 2: /usr/lib/libpthread.so.0 (0x7f5ea78c8000+0xf1e0) [0x7f5ea78d71e0]
[ 8983.834] (EE) 3: /usr/lib/xorg/modules/drivers/radeon_drv.so (0x7f5ea53e2000+0x41bd4) [0x7f5ea5423bd4]
[ 8983.836] (EE) 4: Xorg (DoConfigure+0xdec) [0x46b15c]
[ 8983.837] (EE) 5: Xorg (0x400000+0x7a728) [0x47a728]
[ 8983.838] (EE) 6: Xorg (0x400000+0x26786) [0x426786]
[ 8983.839] (EE) 7: /usr/lib/libc.so.6 (__libc_start_main+0xf5) [0x7f5ea654ca15]
[ 8983.841] (EE) 8: Xorg (0x400000+0x26cad) [0x426cad]
[ 8983.842] (EE)
[ 8983.843] (EE) Segmentation fault at address 0x18
[ 8983.847]
Fatal server error:
[ 8983.848] Caught signal 11 (Segmentation fault). Server aborting
What did I tried:
Using vesa instead --> gives me a flickering screen
Using intel instead --> gives me a black screen
Somebody an idea, what I can do?
Last edited by haschibaschi (2013-01-23 21:25:23)Ok, I removed the packages
xf86-video-intel xf86-video-vesa xf86-video-fbdev
So its the xf86-video-ati, which is used.
Here is my Xorg.0.log
[ 9.006]
X.Org X Server 1.13.2
Release Date: 2013-01-24
[ 9.006] X Protocol Version 11, Revision 0
[ 9.006] Build Operating System: Linux 3.7.4-1-ARCH x86_64
[ 9.006] Current Operating System: Linux flaptop 3.7.4-1-ARCH #1 SMP PREEMPT Mon Jan 21 23:05:29 CET 2013 x86_64
[ 9.006] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=c40fce05-33ae-4a4d-aa51-21295185a22f ro quiet
[ 9.006] Build Date: 25 January 2013 09:33:50AM
[ 9.006]
[ 9.006] Current version of pixman: 0.28.2
[ 9.006] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 9.006] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 9.006] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 26 00:26:38 2013
[ 9.109] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 9.220] (==) No Layout section. Using the first Screen section.
[ 9.220] (==) No screen section available. Using defaults.
[ 9.220] (**) |-->Screen "Default Screen Section" (0)
[ 9.220] (**) | |-->Monitor "<default monitor>"
[ 9.221] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 9.221] (==) Automatically adding devices
[ 9.221] (==) Automatically enabling devices
[ 9.221] (==) Automatically adding GPU devices
[ 9.326] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 9.326] Entry deleted from font path.
[ 9.368] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 9.368] Entry deleted from font path.
[ 9.368] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 9.368] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 9.368] Entry deleted from font path.
[ 9.368] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 9.368] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 9.368] (**) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
[ 9.368] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 9.368] (II) Loader magic: 0x7fcc40
[ 9.368] (II) Module ABI versions:
[ 9.368] X.Org ANSI C Emulation: 0.4
[ 9.368] X.Org Video Driver: 13.1
[ 9.368] X.Org XInput driver : 18.0
[ 9.368] X.Org Server Extension : 7.0
[ 9.368] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 9.369] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 9.371] (--) PCI:*(0:0:2:0) 8086:0046:103c:144a rev 2, Mem @ 0xc0000000/4194304, 0xb0000000/268435456, I/O @ 0x00005050/8
[ 9.371] (--) PCI: (0:1:0:0) 1002:68e0:103c:144a rev 0, Mem @ 0xa0000000/268435456, 0xc4400000/131072, I/O @ 0x00004000/256, BIOS @ 0x????????/131072
[ 9.371] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 9.384] Initializing built-in extension Generic Event Extension
[ 9.384] Initializing built-in extension SHAPE
[ 9.384] Initializing built-in extension MIT-SHM
[ 9.384] Initializing built-in extension XInputExtension
[ 9.384] Initializing built-in extension XTEST
[ 9.384] Initializing built-in extension BIG-REQUESTS
[ 9.384] Initializing built-in extension SYNC
[ 9.384] Initializing built-in extension XKEYBOARD
[ 9.384] Initializing built-in extension XC-MISC
[ 9.385] Initializing built-in extension SECURITY
[ 9.385] Initializing built-in extension XINERAMA
[ 9.385] Initializing built-in extension XFIXES
[ 9.385] Initializing built-in extension RENDER
[ 9.385] Initializing built-in extension RANDR
[ 9.385] Initializing built-in extension COMPOSITE
[ 9.385] Initializing built-in extension DAMAGE
[ 9.385] Initializing built-in extension MIT-SCREEN-SAVER
[ 9.385] Initializing built-in extension DOUBLE-BUFFER
[ 9.385] Initializing built-in extension RECORD
[ 9.385] Initializing built-in extension DPMS
[ 9.385] Initializing built-in extension X-Resource
[ 9.385] Initializing built-in extension XVideo
[ 9.385] Initializing built-in extension XVideo-MotionCompensation
[ 9.385] Initializing built-in extension XFree86-VidModeExtension
[ 9.385] Initializing built-in extension XFree86-DGA
[ 9.385] Initializing built-in extension XFree86-DRI
[ 9.385] Initializing built-in extension DRI2
[ 9.385] (II) LoadModule: "glx"
[ 9.439] (II) Loading /usr/lib/xorg/modules/updates/extensions/libglx.so
[ 9.497] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 9.497] compiled for 6.9.0, module version = 1.0.0
[ 9.498] Loading extension GLX
[ 9.498] (==) Matched intel as autoconfigured driver 0
[ 9.498] (==) Matched ati as autoconfigured driver 1
[ 9.498] (==) Matched intel as autoconfigured driver 2
[ 9.498] (==) Matched vesa as autoconfigured driver 3
[ 9.498] (==) Matched modesetting as autoconfigured driver 4
[ 9.498] (==) Matched fbdev as autoconfigured driver 5
[ 9.498] (==) Assigned the driver to the xf86ConfigLayout
[ 9.498] (II) LoadModule: "intel"
[ 9.544] (WW) Warning, couldn't open module intel
[ 9.544] (II) UnloadModule: "intel"
[ 9.544] (II) Unloading intel
[ 9.544] (EE) Failed to load module "intel" (module does not exist, 0)
[ 9.544] (II) LoadModule: "ati"
[ 9.545] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 9.558] (II) Module ati: vendor="X.Org Foundation"
[ 9.558] compiled for 1.13.0, module version = 7.0.0
[ 9.558] Module class: X.Org Video Driver
[ 9.558] ABI class: X.Org Video Driver, version 13.0
[ 9.558] (II) LoadModule: "radeon"
[ 9.559] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 9.640] (II) Module radeon: vendor="X.Org Foundation"
[ 9.641] compiled for 1.13.0, module version = 7.0.0
[ 9.641] Module class: X.Org Video Driver
[ 9.641] ABI class: X.Org Video Driver, version 13.0
[ 9.641] (II) LoadModule: "vesa"
[ 9.641] (WW) Warning, couldn't open module vesa
[ 9.641] (II) UnloadModule: "vesa"
[ 9.641] (II) Unloading vesa
[ 9.641] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 9.641] (II) LoadModule: "modesetting"
[ 9.641] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 9.650] (II) Module modesetting: vendor="X.Org Foundation"
[ 9.650] compiled for 1.13.1, module version = 0.6.0
[ 9.650] Module class: X.Org Video Driver
[ 9.650] ABI class: X.Org Video Driver, version 13.1
[ 9.650] (II) LoadModule: "fbdev"
[ 9.651] (WW) Warning, couldn't open module fbdev
[ 9.651] (II) UnloadModule: "fbdev"
[ 9.651] (II) Unloading fbdev
[ 9.651] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 9.651] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE
[ 9.655] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 9.655] (++) using VT number 7
[ 9.670] (II) [KMS] Kernel modesetting enabled.
[ 9.670] (II) modesetting(0): using drv /dev/dri/card0
[ 9.670] (II) modesetting(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 9.670] (==) modesetting(0): Depth 24, (==) framebuffer bpp 32
[ 9.670] (==) modesetting(0): RGB weight 888
[ 9.670] (==) modesetting(0): Default visual is TrueColor
[ 9.670] (II) modesetting(0): ShadowFB: preferred YES, enabled YES
[ 9.670] (II) modesetting(0): Output LVDS-0 has no monitor section
[ 9.683] (II) modesetting(0): Output VGA-0 has no monitor section
[ 9.683] (II) modesetting(0): EDID for output LVDS-0
[ 9.683] (II) modesetting(0): Manufacturer: AUO Model: 22ec Serial#: 0
[ 9.683] (II) modesetting(0): Year: 2009 Week: 1
[ 9.683] (II) modesetting(0): EDID Version: 1.3
[ 9.683] (II) modesetting(0): Digital Display Input
[ 9.683] (II) modesetting(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 9.683] (II) modesetting(0): Gamma: 2.20
[ 9.683] (II) modesetting(0): No DPMS capabilities specified
[ 9.683] (II) modesetting(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 9.683] (II) modesetting(0): First detailed timing is preferred mode
[ 9.683] (II) modesetting(0): redX: 0.620 redY: 0.340 greenX: 0.330 greenY: 0.570
[ 9.683] (II) modesetting(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 9.683] (II) modesetting(0): Manufacturer's mask: 0
[ 9.683] (II) modesetting(0): Supported detailed timing:
[ 9.683] (II) modesetting(0): clock: 69.3 MHz Image Size: 344 x 193 mm
[ 9.683] (II) modesetting(0): h_active: 1366 h_sync: 1398 h_sync_end 1422 h_blank_end 1432 h_border: 0
[ 9.683] (II) modesetting(0): v_active: 768 v_sync: 771 v_sync_end 775 v_blanking: 806 v_border: 0
[ 9.684] (II) modesetting(0): Unknown vendor-specific block f
[ 9.684] (II) modesetting(0): AUO
[ 9.684] (II) modesetting(0): B156XW02 V2
[ 9.684] (II) modesetting(0): EDID (in hex):
[ 9.684] (II) modesetting(0): 00ffffffffffff0006afec2200000000
[ 9.684] (II) modesetting(0): 01130103802213780ac8959e57549226
[ 9.684] (II) modesetting(0): 0f505400000001010101010101010101
[ 9.684] (II) modesetting(0): 010101010101121b5642500026302018
[ 9.684] (II) modesetting(0): 340058c1100000180000000f00000000
[ 9.684] (II) modesetting(0): 00000000000000000020000000fe0041
[ 9.684] (II) modesetting(0): 554f0a202020202020202020000000fe
[ 9.684] (II) modesetting(0): 004231353658573032205632200a00c0
[ 9.684] (II) modesetting(0): Printing probed modes for output LVDS-0
[ 9.684] (II) modesetting(0): Modeline "1366x768"x60.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz eP)
[ 9.697] (II) modesetting(0): EDID for output VGA-0
[ 9.697] (II) modesetting(0): Output LVDS-0 connected
[ 9.697] (II) modesetting(0): Output VGA-0 disconnected
[ 9.697] (II) modesetting(0): Using exact sizes for initial modes
[ 9.697] (II) modesetting(0): Output LVDS-0 using initial mode 1366x768
[ 9.697] (II) modesetting(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 9.697] (==) modesetting(0): DPI set to (96, 96)
[ 9.697] (II) Loading sub module "fb"
[ 9.697] (II) LoadModule: "fb"
[ 9.697] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 9.730] (II) Module fb: vendor="X.Org Foundation"
[ 9.730] compiled for 1.13.2, module version = 1.0.0
[ 9.730] ABI class: X.Org ANSI C Emulation, version 0.4
[ 9.730] (II) Loading sub module "shadow"
[ 9.730] (II) LoadModule: "shadow"
[ 9.730] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 9.744] (II) Module shadow: vendor="X.Org Foundation"
[ 9.744] compiled for 1.13.2, module version = 1.1.0
[ 9.744] ABI class: X.Org ANSI C Emulation, version 0.4
[ 9.744] (==) RADEON(G0): Depth 24, (--) framebuffer bpp 32
[ 9.744] (II) RADEON(G0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 9.744] (==) RADEON(G0): Default visual is TrueColor
[ 9.744] (==) RADEON(G0): RGB weight 888
[ 9.744] (II) RADEON(G0): Using 8 bits per RGB (8 bit DAC)
[ 9.744] (--) RADEON(G0): Chipset: "ATI Mobility Radeon HD 5000 Series" (ChipID = 0x68e0)
[ 9.745] (II) Loading sub module "dri2"
[ 9.745] (II) LoadModule: "dri2"
[ 9.745] (II) Module "dri2" already built-in
[ 9.745] (II) Loading sub module "exa"
[ 9.745] (II) LoadModule: "exa"
[ 9.745] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 9.762] (II) Module exa: vendor="X.Org Foundation"
[ 9.762] compiled for 1.13.2, module version = 2.6.0
[ 9.762] ABI class: X.Org Video Driver, version 13.1
[ 9.762] (II) RADEON(G0): KMS Color Tiling: enabled
[ 9.762] (II) RADEON(G0): KMS Color Tiling 2D: enabled
[ 9.762] (II) RADEON(G0): KMS Pageflipping: enabled
[ 9.762] (II) RADEON(G0): SwapBuffers wait for vsync: enabled
[ 9.765] (II) RADEON(G0): Output LVDS-1 has no monitor section
[ 9.767] (II) RADEON(G0): Output HDMI-0 has no monitor section
[ 9.893] (II) RADEON(G0): Output VGA-1 has no monitor section
[ 9.896] (II) RADEON(G0): EDID for output LVDS-1
[ 9.896] (II) RADEON(G0): Printing probed modes for output LVDS-1
[ 9.896] (II) RADEON(G0): Modeline "1366x768"x60.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz eP)
[ 9.896] (II) RADEON(G0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz)
[ 9.896] (II) RADEON(G0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 9.896] (II) RADEON(G0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 9.896] (II) RADEON(G0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 9.896] (II) RADEON(G0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz)
[ 9.896] (II) RADEON(G0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz)
[ 9.896] (II) RADEON(G0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 9.899] (II) RADEON(G0): EDID for output HDMI-0
[ 10.023] (II) RADEON(G0): EDID for output VGA-1
[ 10.023] (II) RADEON(G0): Output LVDS-1 connected
[ 10.023] (II) RADEON(G0): Output HDMI-0 disconnected
[ 10.023] (II) RADEON(G0): Output VGA-1 disconnected
[ 10.023] (II) RADEON(G0): Using exact sizes for initial modes
[ 10.023] (II) RADEON(G0): Output LVDS-1 using initial mode 1366x768
[ 10.023] (II) RADEON(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 10.023] (II) RADEON(G0): mem size init: gart size :1fdff000 vram size: s:20000000 visible:fba0000
[ 10.023] (II) RADEON(G0): EXA: Driver will allow EXA pixmaps in VRAM
[ 10.024] (==) RADEON(G0): DPI set to (96, 96)
[ 10.024] (II) Loading sub module "fb"
[ 10.024] (II) LoadModule: "fb"
[ 10.024] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 10.024] (II) Module fb: vendor="X.Org Foundation"
[ 10.024] compiled for 1.13.2, module version = 1.0.0
[ 10.024] ABI class: X.Org ANSI C Emulation, version 0.4
[ 10.024] (II) Loading sub module "ramdac"
[ 10.024] (II) LoadModule: "ramdac"
[ 10.024] (II) Module "ramdac" already built-in
[ 10.024] (==) Depth 24 pixmap format is 32 bpp
[ 10.037] (II) RADEON(G0): [DRI2] Setup complete
[ 10.037] (II) RADEON(G0): [DRI2] DRI driver: r600
[ 10.037] (II) RADEON(G0): [DRI2] VDPAU driver: r600
[ 10.037] (II) RADEON(G0): Front buffer size: 4128K
[ 10.037] (II) RADEON(G0): VRAM usage limit set to 228182K
[ 10.048] (==) RADEON(G0): Backing store disabled
[ 10.048] (II) RADEON(G0): Direct rendering enabled
[ 10.048] (II) RADEON(G0): Setting EXA maxPitchBytes
[ 10.048] (II) EXA(256): Driver allocated offscreen pixmaps
[ 10.048] (II) EXA(256): Driver registered support for the following operations:
[ 10.048] (II) Solid
[ 10.048] (II) Copy
[ 10.048] (II) Composite (RENDER acceleration)
[ 10.048] (II) UploadToScreen
[ 10.048] (II) DownloadFromScreen
[ 10.048] (II) RADEON(G0): Acceleration enabled
[ 10.048] (==) RADEON(G0): DPMS enabled
[ 10.048] (==) RADEON(G0): Silken mouse enabled
[ 10.049] (II) RADEON(G0): Set up textured video
[ 10.049] (II) RADEON(G0): [XvMC] Associated with Radeon Textured Video.
[ 10.049] (II) RADEON(G0): [XvMC] Extension initialized.
[ 10.049] (II) RADEON(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 10.056] (==) modesetting(0): Backing store disabled
[ 10.056] (==) modesetting(0): Silken mouse enabled
[ 10.056] (II) modesetting(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 10.056] (==) modesetting(0): DPMS enabled
[ 10.080] (--) RandR disabled
[ 10.100] (EE) GLX error: Can not get required symbols.
[ 10.100] (II) modesetting(0): Damage tracking initialized
[ 10.100] (II) modesetting(0): Setting screen physical size to 361 x 203
[ 10.428] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 10.428] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 10.428] (II) LoadModule: "evdev"
[ 10.429] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 10.498] (II) Module evdev: vendor="X.Org Foundation"
[ 10.498] compiled for 1.13.0, module version = 2.7.3
[ 10.498] Module class: X.Org XInput Driver
[ 10.498] ABI class: X.Org XInput driver, version 18.0
[ 10.498] (II) Using input driver 'evdev' for 'Power Button'
[ 10.498] (**) Power Button: always reports core events
[ 10.498] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 10.498] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 10.498] (--) evdev: Power Button: Found keys
[ 10.498] (II) evdev: Power Button: Configuring as keyboard
[ 10.498] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 10.498] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 10.498] (**) Option "xkb_rules" "evdev"
[ 10.498] (**) Option "xkb_model" "evdev"
[ 10.498] (**) Option "xkb_layout" "ch"
[ 10.498] (**) Option "xkb_variant" "de"
[ 10.547] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
[ 10.547] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 10.547] (II) Using input driver 'evdev' for 'Video Bus'
[ 10.548] (**) Video Bus: always reports core events
[ 10.548] (**) evdev: Video Bus: Device: "/dev/input/event14"
[ 10.548] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 10.548] (--) evdev: Video Bus: Found keys
[ 10.548] (II) evdev: Video Bus: Configuring as keyboard
[ 10.548] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14/event14"
[ 10.548] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 10.548] (**) Option "xkb_rules" "evdev"
[ 10.548] (**) Option "xkb_model" "evdev"
[ 10.548] (**) Option "xkb_layout" "ch"
[ 10.548] (**) Option "xkb_variant" "de"
[ 10.548] (II) config/udev: Adding input device Video Bus (/dev/input/event15)
[ 10.548] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 10.548] (II) Using input driver 'evdev' for 'Video Bus'
[ 10.548] (**) Video Bus: always reports core events
[ 10.548] (**) evdev: Video Bus: Device: "/dev/input/event15"
[ 10.548] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 10.548] (--) evdev: Video Bus: Found keys
[ 10.548] (II) evdev: Video Bus: Configuring as keyboard
[ 10.548] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:10/LNXVIDEO:02/input/input15/event15"
[ 10.548] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 10.548] (**) Option "xkb_rules" "evdev"
[ 10.548] (**) Option "xkb_model" "evdev"
[ 10.548] (**) Option "xkb_layout" "ch"
[ 10.548] (**) Option "xkb_variant" "de"
[ 10.549] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 10.549] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 10.549] (II) Using input driver 'evdev' for 'Power Button'
[ 10.549] (**) Power Button: always reports core events
[ 10.549] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 10.549] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 10.549] (--) evdev: Power Button: Found keys
[ 10.549] (II) evdev: Power Button: Configuring as keyboard
[ 10.549] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[ 10.549] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 10.549] (**) Option "xkb_rules" "evdev"
[ 10.549] (**) Option "xkb_model" "evdev"
[ 10.549] (**) Option "xkb_layout" "ch"
[ 10.549] (**) Option "xkb_variant" "de"
[ 10.549] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 10.549] (II) No input driver specified, ignoring this device.
[ 10.549] (II) This device may have been added with another device file.
[ 10.549] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 10.550] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event13)
[ 10.550] (II) No input driver specified, ignoring this device.
[ 10.550] (II) This device may have been added with another device file.
[ 10.550] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 10.550] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[ 10.550] (II) No input driver specified, ignoring this device.
[ 10.550] (II) This device may have been added with another device file.
[ 10.551] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event11)
[ 10.551] (II) No input driver specified, ignoring this device.
[ 10.551] (II) This device may have been added with another device file.
[ 10.551] (II) config/udev: Adding input device HDA Intel MID Front Headphone (/dev/input/event12)
[ 10.551] (II) No input driver specified, ignoring this device.
[ 10.551] (II) This device may have been added with another device file.
[ 10.552] (II) config/udev: Adding input device Acrox USB & PS/2 Mouse (/dev/input/event9)
[ 10.552] (**) Acrox USB & PS/2 Mouse: Applying InputClass "evdev pointer catchall"
[ 10.552] (II) Using input driver 'evdev' for 'Acrox USB & PS/2 Mouse'
[ 10.552] (**) Acrox USB & PS/2 Mouse: always reports core events
[ 10.552] (**) evdev: Acrox USB & PS/2 Mouse: Device: "/dev/input/event9"
[ 10.552] (--) evdev: Acrox USB & PS/2 Mouse: Vendor 0xf62 Product 0x1001
[ 10.552] (--) evdev: Acrox USB & PS/2 Mouse: Found 9 mouse buttons
[ 10.552] (--) evdev: Acrox USB & PS/2 Mouse: Found scroll wheel(s)
[ 10.552] (--) evdev: Acrox USB & PS/2 Mouse: Found relative axes
[ 10.552] (--) evdev: Acrox USB & PS/2 Mouse: Found x and y relative axes
[ 10.552] (II) evdev: Acrox USB & PS/2 Mouse: Configuring as mouse
[ 10.552] (II) evdev: Acrox USB & PS/2 Mouse: Adding scrollwheel support
[ 10.552] (**) evdev: Acrox USB & PS/2 Mouse: YAxisMapping: buttons 4 and 5
[ 10.552] (**) evdev: Acrox USB & PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 10.552] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input9/event9"
[ 10.553] (II) XINPUT: Adding extended input device "Acrox USB & PS/2 Mouse" (type: MOUSE, id 10)
[ 10.553] (II) evdev: Acrox USB & PS/2 Mouse: initialized for relative axes.
[ 10.553] (**) Acrox USB & PS/2 Mouse: (accel) keeping acceleration scheme 1
[ 10.553] (**) Acrox USB & PS/2 Mouse: (accel) acceleration profile 0
[ 10.553] (**) Acrox USB & PS/2 Mouse: (accel) acceleration factor: 2.000
[ 10.553] (**) Acrox USB & PS/2 Mouse: (accel) acceleration threshold: 4
[ 10.554] (II) config/udev: Adding input device Acrox USB & PS/2 Mouse (/dev/input/mouse1)
[ 10.554] (II) No input driver specified, ignoring this device.
[ 10.554] (II) This device may have been added with another device file.
[ 10.554] (II) config/udev: Adding input device 2SF022 (/dev/input/event8)
[ 10.554] (**) 2SF022: Applying InputClass "evdev keyboard catchall"
[ 10.554] (II) Using input driver 'evdev' for '2SF022'
[ 10.554] (**) 2SF022: always reports core events
[ 10.554] (**) evdev: 2SF022: Device: "/dev/input/event8"
[ 10.554] (--) evdev: 2SF022: Vendor 0xbda Product 0x5801
[ 10.554] (--) evdev: 2SF022: Found keys
[ 10.555] (II) evdev: 2SF022: Configuring as keyboard
[ 10.555] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input8/event8"
[ 10.555] (II) XINPUT: Adding extended input device "2SF022" (type: KEYBOARD, id 11)
[ 10.555] (**) Option "xkb_rules" "evdev"
[ 10.555] (**) Option "xkb_model" "evdev"
[ 10.555] (**) Option "xkb_layout" "ch"
[ 10.555] (**) Option "xkb_variant" "de"
[ 10.556] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 10.556] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 10.556] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 10.556] (**) AT Translated Set 2 keyboard: always reports core events
[ 10.556] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 10.556] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 10.556] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 10.556] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 10.556] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 10.556] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 10.556] (**) Option "xkb_rules" "evdev"
[ 10.556] (**) Option "xkb_model" "evdev"
[ 10.556] (**) Option "xkb_layout" "ch"
[ 10.556] (**) Option "xkb_variant" "de"
[ 10.557] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[ 10.557] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 10.557] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 10.557] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 10.557] (II) LoadModule: "synaptics"
[ 10.557] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 10.705] (II) Module synaptics: vendor="X.Org Foundation"
[ 10.705] compiled for 1.13.1, module version = 1.6.2
[ 10.705] Module class: X.Org XInput Driver
[ 10.705] ABI class: X.Org XInput driver, version 18.0
[ 10.705] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 10.705] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 10.705] (**) Option "Device" "/dev/input/event7"
[ 10.720] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 10.720] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 10.720] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5672
[ 10.720] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4550
[ 10.720] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 10.720] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 10.720] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 10.720] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 10.720] (**) Option "TapButton1" "1"
[ 10.720] (**) Option "TapButton2" "2"
[ 10.720] (**) Option "TapButton3" "3"
[ 10.720] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 10.720] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 10.720] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 10.726] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event7"
[ 10.727] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 10.727] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 10.727] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 10.727] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.038
[ 10.727] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 10.727] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 10.727] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 10.727] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 10.727] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 10.728] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 10.728] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 10.728] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event6)
[ 10.728] (II) No input driver specified, ignoring this device.
[ 10.728] (II) This device may have been added with another device file.
[ 10.729] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[ 10.729] (II) No input driver specified, ignoring this device.
[ 10.729] (II) This device may have been added with another device file.
[ 10.729] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 10.729] (II) No input driver specified, ignoring this device.
[ 10.729] (II) This device may have been added with another device file.
[ 10.730] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event5)
[ 10.730] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 10.731] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[ 10.731] (**) HP WMI hotkeys: always reports core events
[ 10.731] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event5"
[ 10.731] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[ 10.731] (--) evdev: HP WMI hotkeys: Found keys
[ 10.731] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[ 10.731] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5"
[ 10.731] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 14)
[ 10.731] (**) Option "xkb_rules" "evdev"
[ 10.731] (**) Option "xkb_model" "evdev"
[ 10.731] (**) Option "xkb_layout" "ch"
[ 10.731] (**) Option "xkb_variant" "de"
Between why I installed the mentioned packages was, cause I'v seen these log entries in the Xorg.0.log:
(EE) Failed to load module "xxxx" (module does not exist, 0)
Can somebody explain what happens here. -
[SOLVED] Poor 2D performance of Radeon 7200 with newest xf86-video-ati
Today arrived new version (6.12.99) of ATI OSS driver (also new version of ati-dri 7.6, mesa 7.6 and xorg-server 1.7.1) Since that moment I'm experiencing poor 2D performance, especially in GIMP (scrooling of zoomed canvas). Also switching of virt. desktop where is bloated Java app. or fat Firefox instance result in poor render of screen (program renders by parts/semiwindows).
Here is some relevant infoozzzz:
lspci
02:00.0 VGA compatible controller: ATI Technologies Inc Radeon R100 QD [Radeon 7200]
pacman -Syu
[2009-11-02 08:52] synchronizing package lists
[2009-11-02 08:53] starting full system upgrade
[2009-11-02 09:00] removed gnome-mount (0.8-1)
[2009-11-02 09:00] upgraded libdrm (2.4.13-1 -> 2.4.15-1)
[2009-11-02 09:00] upgraded libx11 (1.2.2-1 -> 1.3.2-1)
[2009-11-02 09:00] upgraded xextproto (7.0.5-1 -> 7.1.1-1)
[2009-11-02 09:00] upgraded libxext (1.0.5-2 -> 1.1.1-1)
[2009-11-02 09:00] upgraded libxxf86vm (1.0.99.1-1 -> 1.1.0-1)
[2009-11-02 09:00] upgraded fixesproto (4.0-3 -> 4.1.1-1)
[2009-11-02 09:00] upgraded libxfixes (4.0.3-2 -> 4.0.4-1)
[2009-11-02 09:00] upgraded libxdamage (1.1.1-2 -> 1.1.2-1)
[2009-11-02 09:00] upgraded libgl (7.5.1-2 -> 7.6-2)
[2009-11-02 09:00] upgraded ati-dri (7.5.1-2 -> 7.6-2)
[2009-11-02 09:00] upgraded bash (4.0.033-1 -> 4.0.035-1)
[2009-11-02 09:00] upgraded dbus-glib (0.82-1 -> 0.82-2)
[2009-11-02 09:00] upgraded gstreamer0.10 (0.10.24-1 -> 0.10.25-1)
[2009-11-02 09:00] upgraded libxv (1.0.4-1 -> 1.0.5-1)
[2009-11-02 09:00] upgraded gstreamer0.10-base (0.10.24-1 -> 0.10.25-1)
[2009-11-02 09:00] upgraded libtheora (1.0-1 -> 1.1.1-1)
[2009-11-02 09:00] upgraded gstreamer0.10-base-plugins (0.10.24-1 -> 0.10.25-1)
[2009-11-02 09:00] upgraded gstreamer0.10-python (0.10.16-1 -> 0.10.17-1)
[2009-11-02 09:00] upgraded exaile (0.3.0.1-2 -> 0.3.0.1-3)
[2009-11-02 09:00] upgraded libxt (1.0.6-1 -> 1.0.7-1)
[2009-11-02 09:00] upgraded xulrunner (1.9.1.3-2 -> 1.9.1.4-1)
[2009-11-02 09:00] upgraded firefox (3.5.3-1 -> 3.5.4-1)
[2009-11-02 09:00] upgraded gnome-disk-utility (2.28.0-1 -> 2.28.0-2)
[2009-11-02 09:00] upgraded gnutls (2.8.3-1 -> 2.8.4-1)
[2009-11-02 09:00] upgraded gstreamer0.10-ffmpeg (0.10.8-1 -> 0.10.9-1)
[2009-11-02 09:00] upgraded inputproto (1.5.1-2 -> 2.0-1)
[2009-11-02 09:00] upgraded kernel-headers (2.6.31.4-1 -> 2.6.31.4-2)
[2009-11-02 09:00] upgraded libatasmart (0.16-1 -> 0.17-1)
[2009-11-02 09:00] upgraded libdmx (1.0.99.1-1 -> 1.1.0-1)
[2009-11-02 09:00] upgraded libgksu (2.0.8-1 -> 2.0.12-1)
[2009-11-02 09:00] upgraded libgphoto2 (2.4.6-3 -> 2.4.7-1)
[2009-11-02 09:00] upgraded libgsf (1.14.15-1 -> 1.14.16-1)
[2009-11-02 09:00] upgraded libldap (2.4.18-1 -> 2.4.19-1)
[2009-11-02 09:00] upgraded libmpcdec (1.2.6-1 -> 1.2.6-2)
[2009-11-02 09:00] upgraded libsexy (0.1.11-1 -> 0.1.11-2)
[2009-11-02 09:00] upgraded libusb1 (1.0.1-1 -> 1.0.3-1)
[2009-11-02 09:00] upgraded libxmu (1.0.4-2 -> 1.0.5-1)
[2009-11-02 09:00] upgraded libxpm (3.5.7-2 -> 3.5.8-1)
[2009-11-02 09:00] upgraded libxaw (1.0.6-1 -> 1.0.7-1)
[2009-11-02 09:00] upgraded libxcomposite (0.4.0-2 -> 0.4.1-1)
[2009-11-02 09:00] upgraded libxdmcp (1.0.2-2 -> 1.0.3-1)
[2009-11-02 09:00] upgraded libxfont (1.4.0-1 -> 1.4.1-1)
[2009-11-02 09:00] upgraded libxfontcache (1.0.4-2 -> 1.0.5-1)
[2009-11-02 09:00] upgraded renderproto (0.9.3-2 -> 0.11-1)
[2009-11-02 09:00] upgraded libxrender (0.9.4-2 -> 0.9.5-1)
[2009-11-02 09:00] upgraded libxft (2.1.13-1 -> 2.1.14-1)
[2009-11-02 09:00] upgraded libxi (1.2.1-1 -> 1.3-2)
[2009-11-02 09:00] upgraded libxinerama (1.0.99.1-1 -> 1.1-1)
[2009-11-02 09:00] upgraded libxkbfile (1.0.5-1 -> 1.0.6-1)
[2009-11-02 09:00] upgraded libxres (1.0.3-2 -> 1.0.4-1)
[2009-11-02 09:00] upgraded libxtst (1.0.3-2 -> 1.1.0-1)
[2009-11-02 09:00] upgraded libxvmc (1.0.4-2 -> 1.0.5-1)
[2009-11-02 09:00] upgraded libxxf86dga (1.1.1-0.1 -> 1.1.1-1)
[2009-11-02 09:00] upgraded libxxf86misc (1.0.1-2 -> 1.0.2-1)
[2009-11-02 09:00] upgraded mesa (7.5.1-2 -> 7.6-2)
[2009-11-02 09:00] upgraded nautilus (2.28.0-1 -> 2.28.1-1)
[2009-11-02 09:00] upgraded nspr (4.8-1 -> 4.8.2-1)
[2009-11-02 09:00] upgraded openssh (5.3p1-1 -> 5.3p1-2)
[2009-11-02 09:00] upgraded pcre (7.9-1 -> 8.00-1)
[2009-11-02 09:00] upgraded sg3_utils (1.27-2 -> 1.28-1)
[2009-11-02 09:01] upgraded shared-mime-info (0.70-1 -> 0.70-2)
[2009-11-02 09:01] upgraded tightvnc (1.3.10-2 -> 1.3.10-3)
[2009-11-02 09:01] upgraded virtualbox-modules (3.0.8-1 -> 3.0.10-1)
[2009-11-02 09:01] upgraded virtualbox-ose (3.0.8-1 -> 3.0.10-1)
[2009-11-02 09:01] upgraded vte (0.22.2-1 -> 0.22.3-1)
[2009-11-02 09:01] upgraded xf86-input-evdev (2.2.5-1 -> 2.3.0-1)
[2009-11-02 09:01] upgraded xf86-video-ati (6.12.4-1 -> 6.12.99.git20091014-1)
[2009-11-02 09:01] upgraded xf86-video-vesa (2.2.0-1 -> 2.2.1-1)
[2009-11-02 09:01] upgraded xorg-apps (7.5-1.1 -> 7.5-2)
[2009-11-02 09:01] upgraded xorg-font-utils (7.4-3 -> 7.5-2)
[2009-11-02 09:01] upgraded xorg-fonts-alias (1.0.1-2 -> 1.0.2-1)
[2009-11-02 09:01] Regenerating font encodings... done.
[2009-11-02 09:01] upgraded xorg-fonts-encodings (1.0.2-3 -> 1.0.3-1)
[2009-11-02 09:01] upgraded xorg-server-utils (7.4-7 -> 7.5-3)
[2009-11-02 09:01] upgraded xorg-server (1.6.3.901-1 -> 1.7.1-1)
[2009-11-02 09:01] upgraded xorg-utils (7.4-4 -> 7.5-1)
[2009-11-02 09:01] upgraded xorg-xauth (1.0.3-1 -> 1.0.4-1)
[2009-11-02 09:01] upgraded xorg-xkb-utils (7.4-2 -> 7.5-1)
[2009-11-02 09:01] upgraded xterm (246-1 -> 250-1)
cat /etc/X11/xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "dri"
Load "drm"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "LTN"
ModelName "H1996NSL/PNST"
HorizSync 30.0 - 96.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection
Section "Device"
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
Option "AGPMode" "4" # <i>
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # <i>
#Option "GARTSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
Option "EnablePageFlip" "on" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # <i>
#Option "DepthBits" # <i>
#Option "PCIAPERSize" # <i>
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
Option "ColorTiling" "on" # [<bool>]
#Option "VideoKey" # <i>
#Option "RageTheatreCrystal" # <i>
#Option "RageTheatreTunerPort" # <i>
#Option "RageTheatreCompositePort" # <i>
#Option "RageTheatreSVideoPort" # <i>
#Option "TunerType" # <i>
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # <i>
Option "RenderAccel" "on" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
Option "DRI" "on" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
Identifier "Card0"
Driver "radeon"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024"
EndSubSection
EndSection
Section "DRI"
Group "video"
Mode 0666
EndSection
glxinfo
http://pastebin.com/f71f5461c
BTW I'm not using Compiz. Has anyone an idea what could happen? In Glxgears I'm achieving 1200fps, but working with GIMP is laggy-horror.
THX.
Last edited by Srigi (2009-11-04 07:27:45)exactly the same here...
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]
glxinfo: http://pastebin.com/m75fc2c9
Xorg.0.log: http://pastebin.com/m267826b1
xorg.conf: http://pastebin.com/m75c033c2
greets,
smax -
White Screen: xf86-video-ati and Compiz After Trying fglrx? [SOLVED]
I have an ATI Radeon X1200 graphics card. I recently tired the ATI proprietary catalyst driver (and catalyst-utils) from the AUR. They did not work well for me, so I uninstalled them. I had run "aticonfig -initial" but, after removing catalyst and catalyst-utils I restored my old xorg.conf. For some reason, with xf86-video-ati set up again, compiz starts, but goes to a white screen. I can see and move my cursor. Everything functions normally, I just can't see anything. I right clicked my desktop and created folders as a test. When I rebooted without compiz, the clicks had been received and folders had been created. How can I fix this? I'm using Gnome (if that means anything). Here's my /etc/X11/xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dri"
Load "drm"
Load "xtrap"
Load "extmod"
Load "dbe"
Load "glx"
Load "freetype"
Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 330 210 # mm
Identifier "Monitor0"
VendorName "SHP"
ModelName "13ce"
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # <i>
#Option "AGPMode" # <i>
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # <i>
#Option "GARTSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # <i>
#Option "DepthBits" # <i>
#Option "PCIAPERSize" # <i>
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # <i>
#Option "RageTheatreCrystal" # <i>
#Option "RageTheatreTunerPort" # <i>
#Option "RageTheatreCompositePort" # <i>
#Option "RageTheatreSVideoPort" # <i>
#Option "TunerType" # <i>
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # <i>
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
Option "ColorTiling" "on"
Option "AccelMethod" "EXA"
Option "AGPFastWrite" "yes"
Option "EXAVSync" "yes"
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "RS690M [Radeon X1200 Series]"
BusID "PCI:1:5:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Last edited by hank863 (2009-03-29 03:15:26)Fixed It!! I had to reinstall xorg, mesa, libgl, xf86-video-ati, and ati-dri for some reason.
Maybe you are looking for
-
How do I drop icons into my emails?
when i used hotmail plus from the web, it has little picture icons that you can insert in your text like music notes, or smiley faces......i have now added the plug-in so that i can use Mac Mail with my hotmail account, but now how do i get these lit
-
Cursor selection behavior confusion...
If you place your cursor in some text you are composing and then hold the Shift key, you can press either the left or right arrows to select content in that direction one character at a time. This is normal and expected. In all other applications by
-
Errors when running Windows App Certification Kit for desktop application
Hi, I ran the tool over our application and there was only one area in which it failed. However, all the files it mentions in the log are files that were created by the tool itself! The errors are included below. Can you please advise how I should pr
-
The touch screen is almost unuseable when trying to make flight reservations on Southwest Airlines. It becomes jumpy and you have to take extra precautions not to touch any other part of the screen or another page will suddenly pop up. The processor
-
How to clone Microsoft Exchange Server 2013 configurations from one server to another server?
Hi! I need help of cloning Microsoft Exchange Server 2013 configurations from my first Server to the second Server. By doing this, the second Server will replace and run as per normal as the first Server is. How can this be done? Thanks!