[SOLVED] xfce 4.8 = auto mount doesn't work at boot

Hi
I installed arch linux with xfce as DE. auto mount doesn't work at boot. I read the wiki about policykit and I have
ck-launch-session
at my .xinitrc but still no luck. I have dbus running as a daemon and my user belong to appropriate groups (storage and ...)
I don't want to use auto mount rules instead of xfce auto mount.
thanks in advanced
Last edited by sasy360 (2011-07-02 03:16:35)

Jodell wrote:Do you have gvfs installed?
Oh that was all. thanks!
Did you read the wiki entry for Xfce?
yes but it did not mention to install gvfs.

Similar Messages

"Auto completion" doesn't work in the new ABAP editor

Hi Gurus,
It is quite strange that the "auto completion" doesn't work for me in my new laptop. After I press "ENTER", it starts a new line.
Any body know this?
Thanks a lot.

Hello,
Use "Tab" instead of "ENTER"

After update to iOS6.0.1; auto-lock doesn't work

After update to iOS6.0.1; auto-lock doesn't work at all

Which autolock? Camera? Calendar? Game Center?

During video recording the auto focus doesn't work automatically!i must have a tap on the display for to use the autofocus! Ihave an iphone 4s

during video recording the auto focus doesn't work automatically!i must have a tap on the display for to use the autofocus! Ihave an iphone 4s

I know. Same issue here. When I'm not recording but have the video camera on, the autofocus works fine. As soon as I tap the record button and recording starts, the focus is locked until I tap on the screen to focus. I haven't used the camera all that much because of this problem.

IPhone sensor ( auto rotate ) Doesn't work !!

Hello
I bought an Iphone 4S-16G last week and I understood that on of my Iphone sensor ( auto rotate ) doesn't work it means when I landscape my iphone my messages or photos or in a games doesn't rotate , Now what should I do ?
I already restored and turned off and turned on and checked rotation option in portrate oriention by double clicking but it didn't work .
Please Help me .

oops my bad, you did say exactly that you had tried that. Sorry. Also you already Restored too. Only thing I could add, is to Restore as New iPhone, at end of Restore when prompted Set Up as New iPhone. And then see if better. Anyway, iPhone 4S has full Warranty, make Genius Reservation and take iPhone to Apple for resolution.

Auto Completion Doesn't Work in Eclipse 3.1

Hello
I am working with Eclipse 3.1 in Linux Envirnment.
I had update my plugin for FreeMaker and Beanshell.
I had imported my desired classes, still class names are not coming automatically.
I am unable to write program on Eclipse.
reply soon
Thanking you,
Bisweswar Sahu.

This has nothing to do with JSP, also nothing with "auto completion doesn't work".
You need to add the classes to the 'build path' of the project, then you can import them in your code.

[SOLVED] NET_PROFILES=('menu') doesn't work at boot time

Hi I've created two network profiles to change eth0 configuration on my laptop according to where I am.
The problem is that NET_PROFILES=('menu') (in rc.conf) doesn't work at boot time: the profile select dialog doesn't appear.
It works only if I do a /etc/rc.d/network restart.
Here is the relevant part of my rc.conf
lo="lo 127.0.0.1"
eth0="eth0 192.168.0.3 netmask 255.255.255.0 broadcast 192.168.0.255"
INTERFACES=(lo eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network-profiles
NET_PROFILES=('menu') #### I tried even without quotes with the same result!!
By the way, I tried this on three different machines (one is always up to date, the others aren't) with the same result.
Last edited by proc (2007-04-15 14:00:57)

iphitus thanks for your prompt reply, but I already have dialog installed. In fact the menu appears if I do a network restart, but it doesn't at boot.

Ios 6 orientation doesn't work and boot time increases. How to solve these issues for dummy? I don't understand code and strings suggested by others.

I just upgraded from ios 5 to ios 6 on my ipad2. Now orientation doesn't work properly. Boot time increase, it takes longer time to boot. Is there any configuration to solve these issues? I can't understand the explanation with code and strings found on google to solve the orientation issue. Any easy configuration for dummy ?

It supports well for ios 5. I couldn't remember (5.x.x) exactly but I always keeps update for ios5 and the abnormality starts when I upgraded to ios 6.

Auto-lock doesn't work after updating iOS 6.

I'm using iphone 4s. After updating iOS 6, the auto-lock function doesn't work anymore. I left it for 10 minutes and when i came back, the screen was still on although the auto-lock time is 2 minutes. I tested many times, tried to reboot but it didnt help. But the screen auto-lock is still working. Does anyone have problem like me and know how to fix it ?

Are you using Assistive Touch?
See this thread:
Re: IOs 6: Auto Lock Bug iPhone 4S (Updated)

My Norton Internet Security, Passwrd and user name auto complete doesn't work in Firefox 4

Since updating to Firefox 4 my user name and password auto complete form Norton Internet security doesn't work.

Symantec need to update their Firefox add-ons so that they are compatible with Firefox 4. They have indicated that for Norton 360 they plan to release an update to Norton 360 to support Firefox 4 in early May - http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20100720113635EN&ln=en_US
I do not know about the time scale for updates for other Norton products. Pending the update by Symantec, if you want to use the Norton add-ons you will need to downgrade to Firefox 3.6.
To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

FLV Skin Auto Hide Doesn't Work

Hi Guys
I've created a flash video (in Flash Pro 8) and given it a
skin of ClearOverPlaySeekMute.swf. However, the Skin Auto Hide is
not working when viewed in a browser.
I have set the parameter of SkinAutoHide to true, which works
when you Preview as Flash, but as soon as it's exported and viewed
in a browser the skin does not hide. I can get it to occasionally
in Firefox, if I click and drag out of the video, but never in IE.
Any help would be greatly appreciated.
Thanks
Matt

I have the same problem with IE 6 & 7! In Firefox it
works as it should, but in IE not at all.
Can't find anything about that in any forum.. Often the same
question, but nowhere an answer...
I thought about scripting a function to hide the skin after a
certain period of time,
but flvPlayback.skin._visible doens't work and the function
flvPlayback.skinHide doesn't exist....
Anyone an idea??? It's really urgent!

Auto-scrolling doesn't work when JFrame is not visible

Hi, I have auto-scrolling implemented for my JTextPane that sits in JScrollPane - which lives in JInternalFrame. It works as excepted - as long as my application's JFrame is visible. When the JFrame becomes invisible, auto-scrolling simply doesn't work anymore.
I've overcame this by scrolling down in "windowShown", but it's ugly because the user can visually see the scroll down when using this workaround (it jumps).
I guess this is Swing's optimization, but I would really like to overcome it in someway. But it seems I'm not enough a swing hacker to do it.
One thing to note is thtat, the auto-scrolling works fine when the JInternalFrame is NOT visible, but frame is.
I've tried to override the isShowing-method of JInternalFrame, with no luck.
Here's my scrolling method:
public static void scrollDown(JScrollPane scroll) {
          JViewport port = scroll.getViewport();
          Rectangle rect = new Rectangle(0, port.getViewSize().height, 1, 1);
          port.scrollRectToVisible(rect);
          JScrollBar bar = scroll.getVerticalScrollBar();
          bar.setValue(bar.getMaximum() - bar.getModel().getExtent());
     }Anyone have ideas?

At some point I had really hard time getting the auto-scrolling to work, as I got these weird little bumps after scrolling down.
Adding scrollBar.setValue() seemed to 'just fix it'. It actually seems to be superfluous now.
The scrolling is already wrapped in SwingUtilities.invokeLater() - in conjuction with printing text into the JTextPane and it works OK.
I had some wrong info in the first post, the viewport actually does get scrolled down even when the JFrame is not visible. And by visible I mean JFrame.setVisible(false) - my application has a minimize-to-tray feature, which hides the JFrame.
So I think the problem is 'just' a repainting problem. When the frame is shown, the previous scroll location is first displayed, and then a repaint is triggered that causes the 'jump down'.
I'm not still sure how to fix it though.

Dolby Digital Auto Setting Doesn't Work w/4.4.2?

I have a bunch of old movies that were recorded in stereo, pre-Dolby, and of course, a bunch of newer in Dolby Digital. After upgrading to Apple TV iOS 4.4.2 yesterday, I now find that the Settings/Audio & Video/Dolby Digital/Auto setting no longer works.
I just started a new iTunes downloaded movie with Dolby Digital 5.1 sound and noticed that it was playing in PCM stereo-only mode for some reason. I then tried a couple of other older iTunes downloaded movies with 5.1 sound, and they all were playing in the same old PCM stereo mode, as well. To get the new movie to play in 5.1 sound, I had to manually change the above Dolby Digital setting to ON.
A similar issue applies to older movies in pre-Dolby stereo. If the above setting is set to Dolby Digital ON, those older movies switch from normal stereo to Dolby Digital 1.0/Center channel only sound, so I have to either switch the Dolby Digital setting to OFF or back to Auto, which defaults to PCM stereo for everything now.
Is anyone else experiencing this change? The Auto function worked perfectly for me before this upgrade.
I'm using an Apple TV 2 with an optical connection to my audio amplifier. The movie is streaming over my wired gigabit Ethernet home network from my iMac.

Seems to be an issue for some of us since 4.4; see other thread.
https://discussions.apple.com/message/16447970#16447970

[solved]amarok-2.5.0-2 doesn't work

i use Arch Linux x86_64 with the latest kernel from core, it's the 3.2.8, and KDE 4.8.0, Qt 4.8 with ffmpeg 20120127-3. My problem is when i try to run amarok it says "amarok: error while loading shared libraries: libavcodec.so.52: cannot open shared object file: No such file or directory" i made a symlink for libavcodec.so.53 but still doesn't work. I couldn't find anything in this topic. I try to compile the git version from AUR but it's the same.
Last edited by hg2rbw (2012-03-03 07:55:07)

What's the output of
LD_DEBUG=files amarok > amarok.log 2>&1 && grep libavcodec amarok.log

Auto-lock doesn't work

Anyone notice the iPhone five autolock doesn't work after 7.1 update?

try going to settings>general>reset>reset all settings
Note:this will affect your iphone settings

[SOLVED] xfce 4.8 = auto mount doesn't work at boot

Similar Messages

Maybe you are looking for