[Solved] Xfce not Maintaining assigned resolution
Hello people,
From Thursday and been having a annoying bug with Xfce which is that it does not keep the settings screen resolution placed after a Shutdown / Restart. I mean I set the resolution of my monitor to 1920x1080 and after turning off the computer or restart it, on the next boot resolution 1920x1080 is not maintained but is changed to 1024x768, so that on every boot I set the resolution.
I have a Monitor AOC 22 "with native resolution of 1920x1080 and Nvidia graphics card with proprietary drivers
What could be causing this error? Any idea how to fix it?
regards
Last edited by jesusangelm (2013-04-22 18:06:02)
Look through your /var/log/Xorg.0.log. Read the parts about EDID, available screen resolutions, and the resolution selected. Look for something about "Fuzzy" determination of aspect ratio and tell us if you find something as such.
Similar Messages
-
[SOLVED] X not quite right (resolution, driver, color depth)
I am followed the instructions in the Beginner's Guide, and I am quite happy with my system. However although I am certain I installed the open Radeon driver, any time I enable it, X just gives me a blank screen. If I can ctrl-alt-backspace out of it, the screen is really dim and I can barely read it. So I am stuck with the Vesa driver. As I understand it, Vesa doesn't support my monitor's native resolution of 1680x1050. The highest I have been able to get is 1280x1024. Also I would like to use 32-bit color if I could, but that is not as important.
Below is my xorg.conf as it currently stands. I used hwd to generate it. Actually hwd generated two xorg.conf files (xorg.conf.radeon and xorg.conf.vesa). The radeon file never worked, but the vesa version did work right away, so that's the one I started to tweak.
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
# Serial Mouse not detected
# USB Mouse not detected
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/share/fonts/cyrillic"
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
#Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
Option "DPI" "96x96"
# DisplaySize 444 277 # 96 DPI @ 1680x1050 calc: (x|y)pixels * 25.4 / dpi
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
EndSection
Section "Device"
Identifier "Card0"
Driver "vesa"
#Driver "radeon"
VendorName "ATi"
BoardName "Radeon 7500" # RV200 QW
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 24
SubSection "Display"
Depth 1
Modes "1680x1050" "1400x1050" "1280x1024" "1024x768"
EndSubSection
SubSection "Display"
Depth 4
Modes "1680x1050" "1400x1050" "1280x1024" "1024x768"
EndSubSection
SubSection "Display"
Depth 8
Modes "1680x1050" "1400x1050" "1280x1024" "1024x768"
EndSubSection
SubSection "Display"
Depth 15
Modes "1680x1050" "1400x1050" "1280x1024" "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1680x1050" "1400x1050" "1280x1024" "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1680x1050" "1400x1050" "1280x1024" "1024x768"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Last edited by ravinggenius (2008-07-09 22:53:00)Thanks for helping me with this. By the way does Compiz Fusion support the Vesa driver?
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.25-ARCH i686
Current Operating System: Linux ravinggenius 2.6.25-ARCH #1 SMP PREEMPT Thu Jul 3 20:29:23 CEST 2008 i686
Build Date: 21 June 2008 05:47:59PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 9 13:14:04 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "PS/2 Mouse"
(**) Option "AllowMouseOpenFail" "true"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/PEX" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
(WW) The directory "/usr/share/fonts/ttf/western" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
Entry deleted from font path.
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/100dpi,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81e0a60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0314 card 1106,0314 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 1106,1314 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:2: chip 1106,2314 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:3: chip 1106,3208 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:4: chip 1106,4314 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:7: chip 1106,7314 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b198 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:09:0: chip 1102,0004 card 1102,0051 rev 03 class 04,01,00 hdr 80
(II) PCI: 00:09:1: chip 1102,7003 card 1102,0040 rev 03 class 09,80,00 hdr 80
(II) PCI: 00:09:2: chip 1102,4001 card 1102,0010 rev 00 class 0c,00,10 hdr 80
(II) PCI: 00:0f:0: chip 1106,3149 card 1565,3206 rev 80 class 01,01,8f hdr 80
(II) PCI: 00:0f:1: chip 1106,0571 card 1565,3206 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1565,3206 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1565,3206 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1565,3206 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3038 card 1565,3206 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:11:0: chip 1106,3227 card 1106,3227 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:5: chip 1106,3059 card 1565,8212 rev 60 class 04,01,00 hdr 00
(II) PCI: 00:12:0: chip 1106,3065 card 1565,2200 rev 78 class 02,00,00 hdr 00
(II) PCI: 01:00:0: chip 1002,5157 card 1002,013a rev 00 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000e (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b]
[1] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[b]
[2] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[b]
[3] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xf8000000 - 0xf80fffff (0x100000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc Radeon RV200 QW [Radeon 7500] rev 0, Mem @ 0xf0000000/27, 0xf8020000/16, I/O @ 0xa000/8
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xe8000000 from 0xefffffff to 0xe7ffffff
(II) Active PCI resource ranges:
[0] -1 0 0xf8106000 - 0xf81060ff (0x100) MX[b]
[1] -1 0 0xf8100000 - 0xf8103fff (0x4000) MX[b]
[2] -1 0 0xf8104000 - 0xf81047ff (0x800) MX[b]
[3] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[b]O
[4] -1 0 0xf8020000 - 0xf802ffff (0x10000) MX[b](B)
[5] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[b](B)
[6] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[b]
[7] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[8] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[9] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[10] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[11] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[12] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
[13] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[14] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[b]
[15] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[b]
[16] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
[17] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[b]
[18] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[b]
[19] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[b]
[20] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[b]
[21] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xf8106000 - 0xf81060ff (0x100) MX[b]
[1] -1 0 0xf8100000 - 0xf8103fff (0x4000) MX[b]
[2] -1 0 0xf8104000 - 0xf81047ff (0x800) MX[b]
[3] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[b]O
[4] -1 0 0xf8020000 - 0xf802ffff (0x10000) MX[b](B)
[5] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[b](B)
[6] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[b]
[7] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[8] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[9] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[10] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[11] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[12] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
[13] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[14] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[b]
[15] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[b]
[16] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
[17] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[b]
[18] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[b]
[19] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[b]
[20] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[b]
[21] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xf8106000 - 0xf81060ff (0x100) MX[b]
[5] -1 0 0xf8100000 - 0xf8103fff (0x4000) MX[b]
[6] -1 0 0xf8104000 - 0xf81047ff (0x800) MX[b]
[7] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[b]O
[8] -1 0 0xf8020000 - 0xf802ffff (0x10000) MX[b](B)
[9] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[b](B)
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[12] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[b]
[13] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[14] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[15] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[16] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[17] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[18] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
[19] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[20] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[b]
[21] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[b]
[22] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
[23] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[b]
[24] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[b]
[25] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[b]
[26] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[b]
[27] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 4.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI Radeon X550XTX (RV370) 5657 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600, ATI RV610,
ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
ATI ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
ATI ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI ATI RADEON E2400, ATI RV610,
ATI RV670, ATI Radeon HD3870, ATI Radeon HD3850, ATI RV670,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI ATI Radeon HD 2600 XT AGP, ATI ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini ATI Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI ATI Radeon HD 2600 LE
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset ATI Radeon 7500 QW (AGP/PCI) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xf8106000 - 0xf81060ff (0x100) MX[b]
[5] -1 0 0xf8100000 - 0xf8103fff (0x4000) MX[b]
[6] -1 0 0xf8104000 - 0xf81047ff (0x800) MX[b]
[7] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[b]O
[8] -1 0 0xf8020000 - 0xf802ffff (0x10000) MX[b](B)
[9] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[b](B)
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[12] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[b]
[13] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[14] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[15] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[16] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[17] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[18] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
[19] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[20] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[b]
[21] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[b]
[22] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
[23] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[b]
[24] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[b]
[25] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[b]
[26] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[b]
[27] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b](B)
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xf8106000 - 0xf81060ff (0x100) MX[b]
[5] -1 0 0xf8100000 - 0xf8103fff (0x4000) MX[b]
[6] -1 0 0xf8104000 - 0xf81047ff (0x800) MX[b]
[7] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[b]O
[8] -1 0 0xf8020000 - 0xf802ffff (0x10000) MX[b](B)
[9] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[b](B)
[10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[15] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[b]
[16] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[17] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[18] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[19] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[20] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[21] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
[22] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[23] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[b]
[24] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[b]
[25] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
[26] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[b]
[27] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[b]
[28] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[b]
[29] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[b]
[30] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b](B)
[31] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[32] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) RADEON(0): MMIO registers at 0x00000000f8020000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon 7500 QW (AGP/PCI)" (ChipID = 0x5157)
(--) RADEON(0): Linear framebuffer at 0x00000000f0000000
(II) RADEON(0): AGP card detected
(II) RADEON(0): Legacy BIOS detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.28.0
(==) RADEON(0): Page Flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Detected total video RAM=65536K, accessible=65536K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 65536 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 2048x1200
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 20000, max_out_pll: 35000, min_in_pll: 40, max_in_pll: 3000, xclk: 23000, sclk: 230.000000, mclk: 290.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=20000 max=35000; xclk=23000
(II) RADEON(0): Bios Connector table:
(II) RADEON(0): Port0: DDCType-0x60, DACType-1, TMDSType-1, ConnectorType-1
(II) RADEON(0): Port1: DDCType-0x64, DACType-2, TMDSType-1, ConnectorType-2
(II) RADEON(0): Port5: DDCType-0x0, DACType-2, TMDSType-0, ConnectorType-5
(II) RADEON(0): Output VGA-0 using monitor section Monitor0
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): DFP table revision: 2
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Default TV standard: NTSC
(II) RADEON(0): TV standards supported by chip: NTSC
(II) RADEON(0): Port0:
Monitor -- AUTO
Connector -- VGA
DAC Type -- Primary
TMDS Type -- None
DDC Type -- 0x60
(II) RADEON(0): Port1:
Monitor -- AUTO
Connector -- DVI-I
DAC Type -- TVDAC/ExtDAC
TMDS Type -- Internal
DDC Type -- 0x64
(II) RADEON(0): Port2:
Monitor -- AUTO
Connector -- STV
DAC Type -- TVDAC/ExtDAC
TMDS Type -- None
DDC Type -- 0x0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): EDID vendor "HSD", prod id 23312
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1680x1050"x74.9 187.00 1680 1800 1976 2272 1050 1053 1059 1099 -hsync +vsync (82.3 kHz)
(II) RADEON(0): Modeline "1600x1200"x59.9 161.00 1600 1712 1880 2160 1200 1203 1207 1245 -hsync +vsync (74.5 kHz)
(II) RADEON(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
(II) RADEON(0): Modeline "1400x1050"x74.9 156.00 1400 1504 1648 1896 1050 1053 1057 1099 -hsync +vsync (82.3 kHz)
(II) RADEON(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
(II) RADEON(0): Modeline "1280x960"x59.9 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz)
(II) RADEON(0): Modeline "1152x864"x74.8 104.00 1152 1224 1344 1536 864 867 871 905 -hsync +vsync (67.7 kHz)
(II) RADEON(0): Modeline "1600x1200"x75.0 204.75 1600 1720 1888 2176 1200 1203 1207 1255 -hsync +vsync (94.1 kHz)
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
(II) RADEON(0): Manufacturer: HSD Model: 5b10 Serial#: 16843009
(II) RADEON(0): Year: 2007 Week: 7
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync: Separate SyncOnGreen
(II) RADEON(0): Max H-Image Size [cm]: horiz.: 47 vert.: 30
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
(II) RADEON(0): Default color space is primary color space
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.650 redY: 0.318 greenX: 0.303 greenY: 0.605
(II) RADEON(0): blueX: 0.144 blueY: 0.074 whiteX: 0.310 whiteY: 0.330
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 1680 vsize 1050 refresh: 75 vid: 4019
(II) RADEON(0): #1: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
(II) RADEON(0): #2: hsize: 1400 vsize 1050 refresh: 60 vid: 16528
(II) RADEON(0): #3: hsize: 1400 vsize 1050 refresh: 75 vid: 20368
(II) RADEON(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): #5: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) RADEON(0): #6: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) RADEON(0): #7: hsize: 1600 vsize 1200 refresh: 75 vid: 20393
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 146.2 MHz Image Size: 433 x 271 mm
(II) RADEON(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
(II) RADEON(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
(II) RADEON(0): Serial No: 707MA3KA01840
(II) RADEON(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 94 kHz, PixClock max 210 MHz
(II) RADEON(0): Monitor name: HW223
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff002264105b01010101
(II) RADEON(0): 071101030a2f1e782ea8c6a6514d9b24
(II) RADEON(0): 134f54bfef80b30fa9409040904f8180
(II) RADEON(0): 8140714fa94f21399030621a274068b0
(II) RADEON(0): 3600b10f1100001c000000ff00373037
(II) RADEON(0): 4d41334b413031383430000000fd0032
(II) RADEON(0): 4b1e5e15000a202020202020000000fc
(II) RADEON(0): 0048573232330a2020202020202000bf
finished output detect: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
finished output detect: 1
finished output detect: 2
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): EDID vendor "HSD", prod id 23312
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1680x1050"x74.9 187.00 1680 1800 1976 2272 1050 1053 1059 1099 -hsync +vsync (82.3 kHz)
(II) RADEON(0): Modeline "1600x1200"x59.9 161.00 1600 1712 1880 2160 1200 1203 1207 1245 -hsync +vsync (74.5 kHz)
(II) RADEON(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
(II) RADEON(0): Modeline "1400x1050"x74.9 156.00 1400 1504 1648 1896 1050 1053 1057 1099 -hsync +vsync (82.3 kHz)
(II) RADEON(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
(II) RADEON(0): Modeline "1280x960"x59.9 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz)
(II) RADEON(0): Modeline "1152x864"x74.8 104.00 1152 1224 1344 1536 864 867 871 905 -hsync +vsync (67.7 kHz)
(II) RADEON(0): Modeline "1600x1200"x75.0 204.75 1600 1720 1888 2176 1200 1203 1207 1255 -hsync +vsync (94.1 kHz)
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
(II) RADEON(0): Manufacturer: HSD Model: 5b10 Serial#: 16843009
(II) RADEON(0): Year: 2007 Week: 7
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync: Separate SyncOnGreen
(II) RADEON(0): Max H-Image Size [cm]: horiz.: 47 vert.: 30
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
(II) RADEON(0): Default color space is primary color space
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.650 redY: 0.318 greenX: 0.303 greenY: 0.605
(II) RADEON(0): blueX: 0.144 blueY: 0.074 whiteX: 0.310 whiteY: 0.330
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 1680 vsize 1050 refresh: 75 vid: 4019
(II) RADEON(0): #1: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
(II) RADEON(0): #2: hsize: 1400 vsize 1050 refresh: 60 vid: 16528
(II) RADEON(0): #3: hsize: 1400 vsize 1050 refresh: 75 vid: 20368
(II) RADEON(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): #5: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) RADEON(0): #6: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) RADEON(0): #7: hsize: 1600 vsize 1200 refresh: 75 vid: 20393
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 146.2 MHz Image Size: 433 x 271 mm
(II) RADEON(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
(II) RADEON(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
(II) RADEON(0): Serial No: 707MA3KA01840
(II) RADEON(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 94 kHz, PixClock max 210 MHz
(II) RADEON(0): Monitor name: HW223
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff002264105b01010101
(II) RADEON(0): 071101030a2f1e782ea8c6a6514d9b24
(II) RADEON(0): 134f54bfef80b30fa9409040904f8180
(II) RADEON(0): 8140714fa94f21399030621a274068b0
(II) RADEON(0): 3600b10f1100001c000000ff00373037
(II) RADEON(0): 4d41334b413031383430000000fd0032
(II) RADEON(0): 4b1e5e15000a202020202020000000fc
(II) RADEON(0): 0048573232330a2020202020202000bf
in RADEONProbeOutputModes
(II) RADEON(0): EDID vendor "HSD", prod id 23312
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): Output VGA-0 connected
(II) RADEON(0): Output DVI-0 disconnected
(II) RADEON(0): Output S-video disconnected
(II) RADEON(0): Output VGA-0 using initial mode 1680x1050
after xf86InitialConfiguration
(**) RADEON(0): Display dimensions: (470, 300) mm
(**) RADEON(0): DPI set to (90, 101)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 2.0
(==) RADEON(0): Assuming overlay scaler buffer width is 1536
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xf8020000 - 0xf802ffff (0x10000) MX[b]
[1] 0 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[b]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[6] -1 0 0xf8106000 - 0xf81060ff (0x100) MX[b]
[7] -1 0 0xf8100000 - 0xf8103fff (0x4000) MX[b]
[8] -1 0 0xf8104000 - 0xf81047ff (0x800) MX[b]
[9] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[b]O
[10] -1 0 0xf8020000 - 0xf802ffff (0x10000) MX[b](B)
[11] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[b](B)
[12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[15] 0 0 0x0000a000 - 0x0000a0ff (0x100) IX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[18] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[b]
[19] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[20] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[21] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[22] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[23] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[24] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
[25] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[26] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[b]
[27] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[b]
[28] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
[29] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[b]
[30] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[b]
[31] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[b]
[32] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[b]
[33] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b](B)
[34] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[35] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) RADEON(0): RADEONScreenInit f0000000 0 0
(==) RADEON(0): Write-combining range (0xf0000000,0x4000000)
(WW) RADEON(0): Cannot read colourmap from VGA. Will restore with default
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable montype: 1
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x04000000
(II) RADEON(0): MC_FB_LOCATION : 0xf3fff000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): CP in BM mode
(II) RADEON(0): Using 8 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 5 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1728,8191)
(II) RADEON(0): Reserved area from (0,1200) to (1728,1202)
(II) RADEON(0): Largest offscreen area available: 1728 x 6989
(II) RADEON(0): Will use front buffer at offset 0x0
(II) RADEON(0): Will use back buffer at offset 0x1023000
(II) RADEON(0): Will use depth buffer at offset 0x180c000
(II) RADEON(0): Will use 32768 kb for textures at offset 0x1ff5000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xf0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(==) RADEON(0): Using AGP 4x
(II) RADEON(0): [agp] Mode 0x07000207 [AGP 0x1106/0x0314; Card 0x1002/0x5157]
(II) RADEON(0): [agp] 8192 kB allocated with handle 0x00000001
(II) RADEON(0): [agp] ring handle = 0xe8000000
(II) RADEON(0): [agp] Ring mapped at 0xb3926000
(II) RADEON(0): [agp] ring read ptr handle = 0xe8101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0xb3925000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xe8102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xb3725000
(II) RADEON(0): [agp] GART texture map handle = 0xe8302000
(II) RADEON(0): [agp] GART Texture map mapped at 0xb3245000
(II) RADEON(0): [drm] register handle = 0xf8020000
(II) RADEON(0): [dri] Visual configs initialized
disable montype: 1
init memmap
init common
init crtc1
init pll1
freq: 146250000
best_freq: 146250000
best_feedback_div: 130
best_ref_div: 12
best_post_div: 2
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xf3fff000 0x1fff0000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
restore common
restore crtc1
restore pll1
finished PLL1
restore dac
enable montype: 1
(WW) RADEON(0): No crtc mode list for crtc 1,continuing with desired mode
disable montype: 1
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 16
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0xf3fff000 is: 0xf3fff000
(WW) RADEON(0): MC_AGP_LOCATION was: 0xffffffc0 is: 0xe87fe800
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xf3fff000 0xf3fff000
(II) RADEON(0): MC_AGP_LOCATION : 0xe87fe800
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Render acceleration enabled
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(**) Option "dpms" "true"
(**) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor 0 (scanline 1202)
(II) RADEON(0): Using hardware cursor 1 (scanline 1204)
(II) RADEON(0): Largest offscreen area available: 1728 x 6984
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia//theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(WW) RADEON(0): Option "DPI" is not used
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/radeon_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 433 x 271
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(WW) Option "XkbVariant" requires an string value
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(**) Option "Protocol" "auto"
(**) PS/2 Mouse: Device: "/dev/psaux"
(**) PS/2 Mouse: Protocol: "auto"
(**) Option "SendCoreEvents" "true"
(**) Option "CorePointer"
(**) PS/2 Mouse: always reports core events
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons" "true"
(**) Option "Emulate3Timeout" "70"
(**) PS/2 Mouse: Emulate3Buttons, Emulate3Timeout: 70
(**) Option "ZAxisMapping" "4 5"
(**) PS/2 Mouse: ZAxisMapping: buttons 4 and 5
(**) PS/2 Mouse: Buttons: 9
(**) PS/2 Mouse: Sensitivity: 1
(II) evaluating device (PS/2 Mouse)
(II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(--) PS/2 Mouse: PnP-detected protocol: "ExplorerPS/2"
(II) PS/2 Mouse: ps2EnableDataReporting: succeeded
enable montype: 1
disable montype: 1
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x1fff0000 0xf3fff000
(II) RADEON(0): MC_AGP_LOCATION : 0x27ff2000
finished PLL2
finished PLL1
Entering Restore TV
Restore TV PLL
Restore TVHV
Restore TV Restarts
Restore Timing Tables
Restore TV standard
Leaving Restore TV
(II) RADEON(0): [drm] removed 1 reserved context for kernel
(II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0xd12bd000 at 0xb7c32000
(II) RADEON(0): [drm] Closed DRM master.
FreeFontPath: FPE "/usr/share/fonts/misc:unscaled" refcount is 2, should be 1; fixing. -
NVIDIA-340xx driver not correctly assigning resolution on console
I have an NVIDIA Quadro FX 1700 and I must use the legacy driver for CUDA. X can assign the resolution properly, but the virtual console has a lower resolution. When I tried it out with the nouveau driver, the resolution was fine.
Does anyone know how to resolve this?headkase wrote:The proprietary driver does not support kernel mode setting which is required for native resolution virtual consoles. The open-source Nouveau driver does support KMS and that's why it is at native resolution. I believe you can look into a framebuffer like fbdev to work around the issue a bit. Google.
That's not entirely correct. Kernel modesetting does not automatically give you a high resolution console. It's only because the open source KMS drivers have an internal fbcon driver that you get a high res console. The Nvidia driver uses kernel modesetting too (and they've had it for years before the open driver got it), but it's their own proprietary implementation that has a different interface than the open KMS drivers, and this proprietary implementation does not have an internal fbcon driver, it's only used by their X driver.
To get a high res console with the Nvidia driver requires using vesafb/uvesafb (when booting in BIOS mode) or efifb (when booting in UEFI mode). But this limits you to resolutions in the VBIOS of the GPU, and very often widescreen resolutions aren't there. -
[solved] xfce not starting with x
just trying to switch from gnome to xfce. and i've got most of it working great. but i cant actually get xfce to start automatically
i've changed from gdm to slim and changed that in demons in /etc/rc.conf and i've changed .xinitrc and commented out 'exec gnome-session', and added in 'exec startxfce4'. slim starts great, and i can login from that, but for some reason, xfce wont start when x starts, i have to manually start it by typing startxfce4 at the terminal that comes up.
i followed the setup guide in the wiki under xfce.
does anyone know whats causing this?
Last edited by redefine (2008-08-03 00:40:49)heres my .xinitrc.
its exactly the same as i had working with gnome, except i commented out exec gnome-session and added exec xfce4-session
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
exec xterm
exec xfce4-session
# exec gnome-session
# exec startkde
# exec startxfce4
# exec icewm
# exec openbox
# exec blackbox
# exec fluxbox
# exec ratpoison
# exec dwm
# ... or any other WM of your choosing ...
EDIT...ok i fixed it, dont worry.
i removed 'exec xterm' from .xinitrc, and i changed 'xfce' to 'xfce4-session' in /etc/slim.conf where you choose the wm. yay
Last edited by redefine (2008-08-03 00:40:24) -
BP Relationship - Partner Function Assignment not maintained
During the initial load for CUSTOMER_REL the Partner Function Assignment is not maintained for the Relationship "Usage". We want to default this information based on the Sales Area data of the Sold to party and Partner Function maintain in the ECC KNVP and/or KNVK. Anyone have any experience in accomplishing this?
Hi
Go to transaction VOPA and maintain partner determination
In the customer master , VD01 maintain partners for this customer for whom you are creating the sales order
Hope this helps
Cheers
N Ganesh -
[SOLVED] xfce does not start after SLiM login :S
hello, i have been following the wiki's to setup X, and xfce (which works when i start it from CLI (startxfce4)), and i have installed SLiM which works too!
Anyway, i have setup SLiM to startup via /etc/inittab, (Runlevel 5). I use ~/.xinitrc to run my xfce WM:
#the only uncommented line is:
exec startxfce4
The problem is that once SLiM loads, and i login, X seems to crash (i see the CLI login) before SLiM respawns, and i am required to login again. I think it must be a simple issue of xfce not actually being started?
i have tried changing startxfce4 to xfce-session, neither work. The login code for SLiM is (/etc/slim.conf):
login_cmd exec /bin/bash -login ~/.xinitrc %session
and from the same file, my available sessions are:
sessions xfce4,icewm,wmaker,blackbox
So, ive heard of some other people who seemed to experience this same issue, but i cant seem to resolve it like they did anyway, i think i must be missing something and would like some help? thanks.
Last edited by Deuterium (2009-12-14 11:36:06)Many thanks Deuterium. You saved my day! I posted a new thread and finally found your answer. The arch community is great. Now the question is how this file got permission changed?
[EDIT]
After few tests I noticed that while X is working automount is broken again and no possibilty to go to standby either. This was in the past solved by going to the latest version of consolekit. The problem is that I'm already running consolekit 0.4.1-2.
Here is the message I get when inserting a USB drive:
Rejected send message, 1 matched rules; type="method_call", sender=":1.38" (uid=1000 pid=3437 comm="exo-mount) interface="org.freedesktop.Hal.Device.Volume" member="Mount" error name="(unset)" requested_reply=0 destination="org.freedesktop.Hal" (uid=0 pid=2806 comm="/usr/sbin/hald)).
[EDIT2]
The above error came from the fact that when I got stuck with no WM I modifed the .xinitrc to only have 'exec startxfce4' rather than my original '
exec ck-launch-session startxfce4'. Then after fixing the WM issue I forgot to modify .xinitirc back.
Last edited by alphazo (2009-12-25 10:07:58) -
Purchase order output type NEU is not get assigned automatically
Dear All,
when i am creting purchase order the output type NEU is not get assigned automatically.
I have maintained message condn record for NEU and for specific PO doc type NB.
same problame i was facing for the inventory docuemnts but i was resolved by running one SAP std program so please guide me if any such program is available for Purchasing documents also or any other setting i am missing to make.
Pl suggest
Regards,
VimleshHi
Please check the following in customization.Dont check in NACE you may miss something like fine tune control
1) Check the Message determination procedure is having the NEU output type
2) Check the std Message determination procedure is assigned to PO
3) Check the output type for the Access sequence, default data for transmission medium and partner function VN, Language & Form assigned to it
4) Check the Access sequence for the condition tables
5) Check the condition record in MN04/MN05
6) Check the purchasing group has printer assignement
7) Check the fine tuen control for operation 1 & 2 for message type.
Hope your problem now solved.
Thanks /karthik
Edited by: Karthik on Aug 13, 2009 5:29 PM -
hai, Can any one tell me how to handle the error G/L account not maintained when Sale order is rised in va01.
with regards
AnuradhaHi,
I feel that this material and order is make to order scenario.
Kindly check that first?
If yes then check the requirement type which is determined? Assign correct requirement type.
Secondly also check whether you have maintained profit center in your new material.
Hope this solves your problem.
Reward points if it is helpful.
Rgds
VIVEK. -
Number group not maintained for WITH HOLDING TAX challan
Dera frends can you help in solving the problem.
I have configured WHT it is posting well in vendor a/c and posting in tax account too. but while executing remittence challan System giving message " number group not maintained for CO code xyz section IEQEWT! and business places 194c.
where company code - XYZ
official withholding tax code - 194c
business place EWT1.Hi
Pls follow the path
IMG>Financial Accounting (New)>Withholding Tax>Extended Withholding Tax>Postings>Certificate Numbering for Withholding Tax
Pls assign points if the information is useful to you
Regards
Sanil Bhandari -
Partner profile not maintained error while testing inbound processing
Hi gurus,
I am trying to upload a customer master data using LSMW idoc method, I followed all the required steps and then I tried to test the inbound processing using T.code we19 and there i gave my basic type as debcor01 and I clicked on standard inbound test but it gives me an error which says partner profile is not maintained, but I have maintained the partner profile and assigned the same in LSMW. So anyone of you can please help me to solve this problem.
thanks,
RajeevRajeev,
Check whether the Account Category is mantained properly or not.
K.Kiran. -
Number group not maintained for CO code 1000 section IEQ1000 and business p
Hi SAP gurus,
while i am trying to create the remittance challan in the easy access screen with the tt.code J1INCHLN an error message is coming like "Number group not maintained for CO code 1000 section IEQ1000 and business place 194C". Can anybody suggest me how to solve this. Points will be assigned
Regards
CurtisHi,
Check the following information once again...
Use the following path:
SAP Customizing Implementation Guide >> Financial Accounting>> Financial Accounting Global Settings >> Withholding Tax >> Extended Withholding Tax >> Postings>> India >> Remittance Challans >>
Maintain Number Groups
Assign Number Ranges to Number Groups
Maintain Number Ranges
1.Maintain number groups
co.code Sec.code official w.h.tax key no.group
1000 1000 194c 01
2.Assign Number Ranges to Number Groups
Number group Int nr
EX: 01 01
3.Maintain Number Ranges
click on change intervals
enter the relevant company code
ex:
Year From number to number current number EXT ...
2008 1000000 1999999
Check with previious no.ranges, if this is the first time use the new number range or existing number range
It will resolve ur issue.
all the best -
Fiscal year variant 01 is not maintained for calendar year 2001
Dear Experts,
I have a question regasting the InfoObject 0FISCYEAR. When I load the data from PSA to my customized ODS, I'm getting the following error.
1. Fiscal year variant 01 is not maintained for calendar year 2001.
2. Error when assigning SID: Action VAL_SID_CONVERT table 0FISCYEAR.
3. Activation of M records from DataStore object ZDS_GLCD terminated.
4. Process 000015 returned with errors.
I tried the posted solutions in the Forums, but still I could not solve the problems.
Please help me solve the problem.
Full point will be rewarded.
Thanks and Regards,
Azimah AbdullahHi,
Check the table T009B, see whether the fiscal year variant 01 for the year 2007 is maintained or not. If it is not maintained, then go to rsa1, select ur source system and on the context menu select "Transfer Global Settings".
Regards,
Dinesh D -
Customisation for F5 is not maintain in j_1iexcref table
Dear Friends,
In our business process some invoices are not relevant for Excise like F5 or Scrap Sales etc.
After creation of Invoice we go for Batch Utilization in J1i3
By this we create 1000 to 1500 excise invoice every day per plant.
in that day if we created any non excisable invoice like f5 or scrap sales invoices.
That day it fetch error:- "Customization for F5 is not maintained in J_1IEXCREF table"
Due to non excisable invoice we are not maintained in "Assign Billing type to Delivery Type"
How we can solved this issue without going J1IIN individual excise invoices generate.
Regards
ArunIf it is a manufacturing plant, you are suppose to create an excise invoice even if any material is not excisable. This is from excise point of view. I am not sure, whether the client is a manufacturer.
Coming to the requirement, in J1I3, you have the option of selecting "SD Document category". Here select "M" and execute, assuming that in F5 you have not made any changes in VOFA.
thanks
G. Lakshmipathi -
GL account has not been assigned for the excise a/c in customization
HI ,
When i try to post MIGO for PO i am getting the following error message .Please help me to solve this issue
GL account has not been assigned for CLEAR in customization
Message no. 8I447
Diagnosis
GL account has not been assigned for the excise a/c in customization
Procedure
Assign GL a/c for the excise a/c in CIN customization under : Accounting -> Assign GL accounts to excise groups and transaction types
Thanks & Regards,
SenthilHI
I have maintained as you mentioned but i am getting the same error message.
Here i am using INT Charts of account and also i have one question when determining account for Excise whether we have to maintain CAIN charts of account please clarify me on this issue
Give me a good solution for the above issue
Thanks & Regards,
Senthil. -
Company code data not maintained ERROR
I have defined company code, plant, str loc, purchase org, and i have assigned all those things. i have also assigned to controlling area. in ec01 it is showing the structure but while creating the Material master for that particular plant it is showing the msg Company code data not maintained.
Hi Praveen,
It seems from your explanation that you havent maintained company code for Materials management,
Got to transaction OMSY maintain your company code for present fiscal year and period.
I hope this will will solve your Issue.
With Regards,
Vijaykumar Panchagattimath
Maybe you are looking for
-
Is it possible to use a single iPhone with two contact numbers via dual sim or an app?
Is it possible to use a single iPhone with two contact numbers via dual sim or an app? This would be a useful feature for personal and company numbers but using one mobile, rather than carrying two devices or diverting calls.
-
Attachments will not open in Treo
Using Adobe standard 8.1 and MS Office 07. When I open a PDF file and send it to someone on their treo phone using the email button, it will not open. They get a message "Cannot view attachment". Here's the rub. If I open outlook and manually attach
-
I want to access remote EJB from my Portal Service. the EJB and the portal Service run on a separated machines. here is what i wrote: Properties properties = new Properties(); properties.put(Context.INITIAL_CONTEXT_FACTORY, "com.sap.engine.services.j
-
How can i change the servicename in oracle11g.
i was installed oracle11g and i uninstall that one. i gave the service name as orcl at that time. and i reinstalled and i gave the sid as orclocal. but it is not showing this one.. previous sid is dispayed. how can i change that one.
-
Struts - Formatting date in display:column tag
Hi , I am using the following code to format the date in my display tag <display:column headerClass="myclass" property="submittedDate" title="DATE SUBMITTED" decorator="org.displaytag.sample.LongDateWrapper" /> which displays the date like '12/22