[solved] xfce not starting with x

just trying to switch from gnome to xfce. and i've got most of it working great. but i cant actually get xfce to start automatically
i've changed from gdm to slim and changed that in demons in /etc/rc.conf and i've changed .xinitrc and commented out 'exec gnome-session', and added in 'exec startxfce4'. slim starts great, and i can login from that, but for some reason, xfce wont start when x starts, i have to manually start it by typing startxfce4 at the terminal that comes up.
i followed the setup guide in the wiki under xfce.
does anyone know whats causing this?
Last edited by redefine (2008-08-03 00:40:49)

heres my .xinitrc.
its exactly the same as i had working with gnome, except i commented out exec gnome-session and added exec xfce4-session
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
exec xterm
exec xfce4-session
# exec gnome-session
# exec startkde
# exec startxfce4
# exec icewm
# exec openbox
# exec blackbox
# exec fluxbox
# exec ratpoison
# exec dwm
# ... or any other WM of your choosing ...
EDIT...ok i fixed it, dont worry.
i removed 'exec xterm' from .xinitrc, and i changed 'xfce' to 'xfce4-session' in /etc/slim.conf where you choose the wm. yay
Last edited by redefine (2008-08-03 00:40:24)

Similar Messages

[SOLVED] XFCE always starting with the US keyboard

Hi guys.
Recently I came back to XFCE and I have one problem: it always starts with the keymap set to US. I have to manually change it to PL (which I need) with setxkbmap. Also, when I'm using the panel plugin I cannot choose any keymaps other than the currently selected.
What can I do about it?
Last edited by JeremyTheWicked (2008-10-12 21:49:56)

The way I deal with the multimedia keys is that
1) figure out what keycodes they generate (run 'xev' and do some presses)
2) assign the correct name to them via xmodmap
maybe 3) use xbindkeys to let them do what they should do (but this is probably not necessary, DEs like xfce should be able to act just based on having a correct name assigned to the keypresses)
the xmodmap stuff:
~/.xmodmaprc wrote:keycode 144 = XF86AudioPrev
keycode 153 = XF86AudioNext
keycode 162 = XF86AudioPlay
keycode 164 = XF86AudioStop
and then have 'xmodmap ~/.xmodmaprc' executed at X start (again, some DEs do this automatically, some don't)
But! maybe figuring out the correct option for your keyboard might render all of the above steps unnecessary. I don't know a good place to look for the options, except closely inspecting the contents of /usr/share/X11/xkb - there's a lot of stuff, but that's for instance where I found out the possible variants for the us keyboard.

Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8

Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
resetpassword
That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Property List error: Unexpected character b at line 1 / JSON error: JSON text did not start with array or object and option to allow fragments not set.

Hi,
I have a MBP 13' Late 2011 and Yosemite 10.10.2 (14C1514).
Until yesterday, I was using Garmin ConnectIQ SDK and all was working fine.
Yesterday, I've updated my system with latest security updates and Xcode updates too (Version 6.2 (6C131e)).
Since, I can't launch the ConnectIQ simulator app, I have this message in console :
8/04/2015 15:19:04,103 mds[38]: There was an error parsing the Info.plist for the bundle at URL Info.plist -- file:///Volumes/Leto/connectiq-sdk-mac-1.1.0_2/ios/ConnectIQ.bundle/
The data couldn’t be read because it isn’t in the correct format.
<CFBasicHash 0x7fa64f44e9a0 [0x7fff7dfc7cf0]>{type = immutable dict, count = 2,
entries =>
0 : <CFString 0x7fff7df92580 [0x7fff7dfc7cf0]>{contents = "NSDebugDescription"} = <CFString 0x7fa64f44f0a0 [0x7fff7dfc7cf0]>{contents = "Unexpected character b at line 1"}
1 : <CFString 0x7fff7df9f5e0 [0x7fff7dfc7cf0]>{contents = "kCFPropertyListOldStyleParsingError"} = Error Domain=NSCocoaErrorDomain Code=3840 "The data couldn’t be read because it isn’t in the correct format." (Conversion of string failed.) UserInfo=0x7fa64f44eda0 {NSDebugDescription=Conversion of string failed.}
I have looked at this file and it looks like a binary plist
bplist00ß^P^V^A^B^C^D^E^F^G^H
^K^L^M^N^O^P^Q^R^S^T^U^V^W^X^Y^Z^[^\^]^^^_ !"$%&'()'+,^[\CFBundleNameWDTXcodeYDTSDKName_^P^XNSHumanReadableCopyrightZDTSDKBuild_^P^YCFBundleDevelopmentRegion_^P^OCFBundleVersi on_^P^SBuildMachineOSBuild^DTPlatformName_^P^SCFBundlePackageType_^P^ZCFBundleShortVersionString_^P^ZCFBundleSupportedPlatforms_^P^]CFBundleInfoDictionaryVersion_^P^RCFBundleE xecutableZDTCompiler_^P^PMinimumOSVersion_^P^RCFBundleIdentifier^UIDeviceFamily_^P^QDTPlatformVersion\DTXcodeBuild_^P^QCFBundleSignature_^P^ODTPlatformBuildYConnectIQT0611[iph oneos8.1o^P-^@C^@o^@p^@y^@r^@i^@g^@h^@t^@ ^@©^@ ^@2^@0^@1^@5^@ ^@G^@a^@r^@m^@i^@n^@.^@ ^@A^@l^@l^@ ^@r^@i^@g^@h^@t^@s^@ ^@r^@e^@s^@e^@r^@v^@e^@d^@.V12B411RenQ1V14C109Xiphoneos TBNDLS1.0¡#XiPhoneOSS6.0YConnectIQ_^P"com.apple.compilers.llvm.clang.1_0S8.1_^P^Tcom.garmin.ConnectIQ¡*^P^AW6A2008aT????^@^H^@7^@D^@L^@V^@q^@|^@<98>^@ª^@À^@Ï^@å^A^B^A^_^A?^AT^ A_^Ar^A<87>^A<96>^Aª^A·^AË^AÝ^Aç^Aì^Aø^BU^B\^B_^Ba^Bh^Bq^Bv^Bz^B|^B<85>^B<89>^B<93>^B¸^B¼^BÓ^BÕ^B×^Bß^@^@^@^@^@^@^B^A^@^@^@^@^@^@^@-^@^@^@^@^@^@^@^@^@^@^@^@^@^@^Bä
I guess it is a normal format but my system seems to be unable to read binary plist ?
I tried some stuff with plutil
plutil -lint Info.plist
Info.plist: Unexpected character b at line 1
Same for convert
plutil -convert xml1 Info.plist
Info.plist: Property List error: Unexpected character b at line 1 / JSON error: JSON text did not start with array or object and option to allow fragments not set.
I also try to download a fresh version of the connectIQ SDK and no changes.
Any idea ?
Thanks

Step by step, how did you arrive at seeing this agreement?

Hi, Im from Philippines,.... i am currently using my iPhone 4 (iOs.6.3)it started when i upgrade it from iOs4 to iOs 6.3 , My iPhone doesnt identify numbers even if its in my contact if its not starting with +63 ..what will i do?

Hi, Im from Philippines,.... i am currently using my iPhone 4 (iOs.6.3)it started when i upgrade it from iOs4 to iOs 6.3 , My iPhone doesnt identify numbers even if its in my contact if its not starting with +63 ..what will i do?
I change everything into +63 and i thought everything is already fine,.. and then now , i dont know what happened why it doesnt recognize numbers with +63 anymore

Hello hsielglad,
Thank you for your question. iTunes 11.1 is required to update to and sync with iOS 7. If you are still running iTunes 10.6.3, I recommend trying to obtain the update by going to the iTunes menu and selecting Check for Updates.
iTunes: How to install the latest version
http://support.apple.com/kb/HT5654
If you continue to get the message that iTunes is up to date, you can download the latest version of iTunes here:
Download iTunes
http://www.apple.com/itunes/download/
Once the file downloads, double click on the installation file that downloaded to initiate the installation.
Best,
Sheila M.

Error: response does not start with HTTP

hi,
i am using a MIDP class to send a string to a java servlet which then returns a .gif image. the string is being successfully to the servlet, but an exception is being thrown when the image is being sent back.
java.io.IOException: response does not start with HTTP it starts with: GIF89aï4
at com.sun.midp.io.j2me.http.Protocol.readResponseMessage(Protocol.java:2166)
at com.sun.midp.io.j2me.http.Protocol.finishRequestGetResponseHeader(Protocol.java:1934)
at com.sun.midp.io.j2me.http.Protocol.sendRequest(Protocol.java:1598)
at com.sun.midp.io.j2me.http.Protocol.sendRequest(Protocol.java:1517)
at com.sun.midp.io.j2me.http.Protocol.openInputStream(Protocol.java:484)
my code is as follows in the midp class :
HttpConnection c = null;
InputStream is = null;
StringBuffer sb = new StringBuffer();
String url="http://localhost:8090/ProjectServer/createMap";
url=url+"?Source="+src+"&Destination="+dest;
try {
c = (HttpConnection)Connector.open(url,Connector.READ_WRITE, true);
c.setRequestMethod(HttpConnection.GET); //default
//is = c.openDataInputStream();
is = new DataInputStream(c.openInputStream()); //openInputStream(); // transition to connected!
Image im=null;
try
ByteArrayOutputStream bStrm = new ByteArrayOutputStream();
int ch;
while ((ch = is.read()) != -1)
bStrm.write(ch);
// Place into image array
byte imageData[] = bStrm.toByteArray();
// Create the image from the byte array
im = Image.createImage(imageData, 0, imageData.length);
finally
// Clean up
if (is != null)
is.close();
the code in the servlet is as follows :_
ServletContext sc = getServletContext();
// Get the MIME type of the image
String mimeType = sc.getMimeType("route.gif");
if (mimeType == null) {
sc.log("Could not get MIME type ");
response.setStatus(HttpServletResponse.SC_INTERNAL_SERVER_ERROR);
return;
// Set content type
response.setContentType(mimeType);
// Set content size
response.setContentLength((int)file.length());
// Open the file and output streams
FileInputStream in = new FileInputStream(file);
OutputStream outstream = response.getOutputStream();
// Copy the contents of the file to the output stream
byte[] buf = new byte[1024];
int count = 0;
while ((count = in.read(buf)) >= 0) {
outstream.write(buf, 0, count);
in.close();
outstream.close();
il be immensely grateful if some1 cud tell me whre i am gng wrong.
thnx,
nev

Hi, I�m trying to do the same as above, get MP3 from a Shoutcast server.
I got the same fault ("response does not start with HTTP it starts with: ICY") when I tried to open an HttpConnection as bellow:
============================================
HttpConnection conn = (HttpConnection) Connector.open("http://64.236.34.196/stream/1074");
Then I tried to open a socket connection as bellow:
======================================
SocketConnection conn = (SocketConnection) Connector.open("socket://64.236.34.196:80");
String get = "GET /stream/1074 HTTP/1.1";
DataOutputStream os = conn.openDataOutputStream();
os.writeUTF(get);
InputStream is = conn.openInputStream();
But then I got the following error:
=========================
java.lang.SecurityException: Target port denied to untrusted applications
Could someone help me to find out what is going on?
Thanks a lot!

A name should not start with any special characters

I need to put a condition in iF statement such that a name that is given by the user should not start with any special charecters.A dialog box should display indicating this conditon.Can u plz give sample code for this.My code is as below.
//text box for giving the name
JTextFeild ReportNameText;
//the name is stored in String
String name=ReportNameText.getText();
//Here tell me how the if condition should be written
//condition to be mentioned

Already asked, and answered, here: http://forum.java.sun.com/thread.jspa?threadID=727919
See reply 4 in that thread, and scsi-boy's suggestion of writing another
method to check for "special" characters. And the links to the String
and Character API documentation given.

"Layer 1 does not start with a new cell" replicator error

Hi All,
I recently sent a dual layer +R DVD off to our replication house and their system is returning a message that says: "Layer 1 of DVD-Video does not start with a new cell".
I know from reading that the dual-layer breakpoint must be set to the end of a cell, but what does the word "cell" translate into for DVDSP4?
I had the DVD DL+R set to Automatic and Non-Seamless for output for the break point. Should I just try setting the break point manually at the beginning or ending of a track that would be dubbed as just a little more than half the size of the content? (I know in OTP, the Layer 0 has to be bigger than Layer 1)
Please Help!
Cheers,
Dusty

Thanks both of you for your replies.
Eric, I am currently exporting DDPs to send in to the replicator. I also emailed them asking if they accept this format for delivery. (Which I would hope they would, as it is, an answer to DLT of sorts) Thanks for bringing this up, DDP is new to me, as this is our first DL project for replication.
Drew, to answer your reply, yes I have two viable markers (chapter markers) that show up in black, not grayed out, in the tab you mentioned under formatting. I chose manual break point selection for this last disc I burned and chose chapter 4 of that track. (chapter 4 and chapter 5 of track 6 are only options) I have to assume that the "automatic" setting was selecting chapter 5, as it had to see that as the last viable marker available to select, as described in the DVDSP4 manual.
DVDSP4 says that all markers are considered cells- Or actually that tracks are cells and that the markers within them make up more cells. So my question, outside of DDP option, would be, "what truly constitutes a cell boundary in DVDSP4?" Is it the markers within the tracks or the beginning or ends of the tracks themselves?
As a side note, I burned the disc that received the error, "Layer 1 doesn't start with a new cell" from an IMG i created from DVDSP4 through Disk Utility. Word is that IMG's somehow don't include breakpoint information.
So at this point I don't know if it is the IMG or the fact that DVDSP4 wants the break at one of two possible chapter markers in track 6.
(Some more background- this is a TV show season DVD, with thirteen tracks of video, each with 12-14 chapter markers a piece.)
Any more thoughts to help clear the air on what constitutes a true new cell boundary?
Thanks sooo much Eric and Drew, I know this a long read.
Cheers,
Dusty

Path login does not start with a "/" character

I get a "java.lang.RuntimeException: Path login does not start with a "/" character" in my WebApplication.
- Http Status 500
- The server encountered an internal error () that prevented it from fulfilling this request.
Instead I excepted the site for a Re-Login (timout after 10 min), What's wrong?
The server I use is: Sun Java System Application Server Platform Edition 8.0 (build b57-fcs)
Here is the full StackTrace:
[#|2004-05-26T14:50:50.609+0200|SCHWERWIEGEND|sun-appserver-pe8.0|javax.enterprise.system.container.web|_ThreadID=17;|Standard
WrapperValve[OwaFolderTree]: Servlet.service() for servlet OwaFolderTree threw exception
java.lang.RuntimeException: Path login does not start with a "/" character
at org.apache.catalina.core.ApplicationContextFacade.doPrivileged(ApplicationContextFacade.java:451)
at org.apache.catalina.core.ApplicationContextFacade.getRequestDispatcher(ApplicationContextFacade.java:255)
at com.space2go.icafe.S2GHttpServlet.service(S2GHttpServlet.java:3260)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:861)
at sun.reflect.GeneratedMethodAccessor114.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:289)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:311)
at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:205)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:283)
at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:102)
at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:192)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:263)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:156)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:569)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:261)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:215)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:156)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:569)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:200)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:156)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:180)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:582)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
at com.sun.enterprise.webservice.EjbWebServiceValve.invoke(EjbWebServiceValve.java:134)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
at com.sun.enterprise.security.web.SingleSignOn.invoke(SingleSignOn.java:272)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
at com.sun.enterprise.web.VirtualServerValve.invoke(VirtualServerValve.java:209)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:569)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:161)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:156)
at com.sun.enterprise.web.VirtualServerMappingValve.invoke(VirtualServerMappingValve.java:166)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:569)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:979)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:211)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:692)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:647)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:589)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:691)
at java.lang.Thread.run(Thread.java:534)

It looks like you are getting this error when trying to use the RequestDispatcher. There are two different flavors of the RequestDispatcher :ServletRequest.getRequestDispatcher that will take a relative path and ServletContext.getRequestDispatcher that will only take absolute paths (ie start with a '/').
If yoy are trying the use the second version of RequestDispatcher you'll need to adjust the path to an absolute path.
http://java.sun.com/products/servlet/2.3/javadoc/javax/servlet/ServletContext.html

HWS file error when not starting with Ch 0

Hello,
I used the "niScope EX Save to File - HWS Low Level - Single Channel Stream.vi" as my starting point and added 8 channels for a 5105 card. Although this is a complex Queue-based vi, it works fine as long as my RAID is fast enough.
However, we have need to take data from channels 4 to 7 and not start with Ch 0. When I do this, my LabVIEW HWS reader does not see any data, nor does the MATLAB code I have written to read our HWS files.
Looking at the file in HDFView, I see that the data starts in vector0 and not vector1, as when I record Channels 0 to 3.
Perhaps I need to use the HDF5 LabVIEW code to force the writing to a different location in the HDF file?
Thanks for your help.

Hello,
I was out of the office Mon. and Tues. I took out a section that just collects one 5105 card in a steaming, continuous collect mode. This is part of a much bigger VI and I included the “Helper Aps” folder that has all the sub-VIs for that larger app. There are more sub-VIs than you need for “5105 Cont Collect.vi”, but it should run once you tell it where the sub-VIs are. Included is a quick-look reader I use to look at the data.
The data file Ch_0_to_3_5105-0.hws can be read, but the Ch_4_to_7_5105-0.hws file cannot.
Thank you for your help.
Attachments:
5105_Cont_Collect.zip ‏3267 KB

DB is not starting with spfile .

Hi ,
i am running DB (10.2.0.4) DB on solaris.x64 platform.
When i started the database after install , its giving error as
SQL> startup
ORA-00064: object is too large to allocate on this O/S (1,3994560)
I checked the sga_target size in spfile , which is set to (729145600 bytes ~ 595 M)
When installed another DB with sga_target size as 412 M
and started the DB it gives follwing error .
SQL> startup
SQL> ORA-00821: Specified value of sga_target 412M is too small, needs to be at least 552M
if i start the same DB with pfile where sga_target has set to 1632 M , the DB is starting successfully.
My question is if it is starting with this higher value of sga_target in with pfile , why it is not starting with a lesser value.

Cause: The specified value of sga_target is too small for the SGA to accommodate all of the necessary SGA components such as the log buffer, buffer pools, shared pool, etc.
Action: Set sga_target to the recommended value or reduce the values of any SGA component size parameters you have specified.
The previous solutions where correct, but if you're not providing a full path on the "CREATE SPFILE" make sure you have defined the parameter SPFILE. Otherwise you'll get the SPFILE created on $ORACLE_HOME/dbs/spfileDBNAME.ora
Regards,
Enric Moya

Managed server is not starting with MSI mode

Managed server not starting with MSI mode even though we enabled the managed server independence mode
Started the admin server and managed server first time enabled the MSI mode.
Restarted all admin and Managed server.
We have tested the following scenarios
scenarios1: Stopped the Admin server and restarted the Managed server with MSI mode it comes up.
scenarios2:Admin server is running but not able to connect to the managed server
In this scenario
we have removed the Network cable and restarted the managed server its throwing ldap error.
<Aug 14, 2010 1:58:32 PM SGT> <Error> <Security> <BEA-090870> <The realm "myrealm" failed to be loaded: weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: [Security:090730]Failed to verify credential mapper LDAP hierarchy
netscape.ldap.LDAPException: failed to connect to server ldap://sgppsr00383:16827 (91)
at netscape.ldap.LDAPConnSetupMgr.connectServer(LDAPConnSetupMgr.java:515)
at netscape.ldap.LDAPConnSetupMgr.openSerial(LDAPConnSetupMgr.java:435) at netscape.ldap.LDAPConnSetupMgr.connect(LDAPConnSetupMgr.java:274)
at netscape.ldap.LDAPConnSetupMgr.openConnection(LDAPConnSetupMgr.java:199)
at netscape.ldap.LDAPConnThread.connect(LDAPConnThread.java:109)
at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:1083) at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:954)
at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:781)
at weblogic.ldap.EmbeddedLDAPConnection.getAndInitDelegate(EmbeddedLDAPConnection.java:2031)
at weblogic.ldap.EmbeddedLDAPConnection.add(EmbeddedLDAPConnection.java:1065) at weblogic.security.providers.credentials.DefaultCredentialMapperLDAPHelper.addEntry(DefaultCredentialMapperLDAPHelper.java:537)
at weblogic.security.providers.credentials.DefaultCredentialMapperLDAPHelper.createOrgUnit(DefaultCredentialMapperLDAPHelper.java:432)
at weblogic.security.providers.credentials.DefaultCredentialMapperLDAPHelper.verifyHierarchy(DefaultCredentialMapperLDAPHelper.java:407)
at weblogic.security.providers.credentials.DefaultCredentialMapperLDAPHelper.<init>(DefaultCredentialMapperLDAPHelper.java:146) at weblogic.security.providers.credentials.DefaultCredentialMapperLDAPHelper.getInstance(DefaultCredentialMapperLDAPHelper.java:112)
at weblogic.security.providers.credentials.DefaultCredentialMapperProviderImpl.initialize(DefaultCredentialMapperProviderImpl.java:93)
at com.bea.common.security.internal.legacy.service.SecurityProviderImpl.init(SecurityProviderImpl.java:53)
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:340) at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:292)
at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:263)
at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:71)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:461) at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:822)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:851)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1007)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:854) at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209) at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
- with nested exception:
Managed server looking for ldap configuration from admin server.
I have checked the all configuration file same on both managed server and admin server.
Please let me know How to recover the managed server in this scenario.
Edited by: user10773210 on Aug 16, 2010 11:55 PM
Edited by: user10773210 on Aug 17, 2010 2:38 AM

thanks for the reply....
the managed server is pointing to jrokit_160_22_D1.1.1-3 jdk....the server has enough ram also...while running the managed server showing status 'STARTING' for long period of time...and the admin server health goes 'Warning' because of threadpool....when we stop the managed server then adminserver health becomes ok...

I have a column of names, some DO NOT start with a capital letter, how do I filter them

new to Mac environment and i have a column of names, some DO NOT start with a capital letter, how do I filter them

HI PTU,
You can mark the rows starting with lower case letters using a formula, then filter on the contents of the column containing the formula. For the example below, the names are in column B and the formula is in column C.
C2: =IF(AND(CODE(B)>=95,CODE(B)<=122),"!!!","")
CODE returns the ASCII code for the first character in the target cell. Lower case letters have ASCII codes in the range specified in the formula: a = 95, z = 122
For names starting with characters in this range, the forula returns a string of three exclamation points. For any other initial character, the formula returns a null string ( "" ).
An empty cell in column B will cause the formula to return an error in that row of column C. You can avoid this by embedding the formula in an IF statement that suppresses the calculation if the length of the entry in column B is less than one character. Revised formula shown below.
C2: =IF(LEN(B)<1,"",IF(AND(CODE(B)>=95,CODE(B)<=122),"!!!",""))
Regards,
Barry

WLS not starting with SP3

I believe I've followed the installation instructions for SP3. However I
get the error below when trying to start WLS (from the command line using
'wlserver.exe'). I've added weblogic510sp3boot.jar to the beginning of
CLASSPATH and have added weblogic510sp3.jar to the beginning of the WL
classpath (using wlconfig).
Any ideas what is going on?
Thanks,
Mike
The WebLogic Server did not start up properly.
Exception raised: java.lang.reflect.InvocationTargetException
java.lang.reflect.InvocationTargetException: java.lang.NoSuchMethodError:
weblog
ic.boot.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNo
tify; not found
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoa
der.java:140)
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoa
der.java:112)
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoa
der.java:104)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>
(RecursiveReloadOnModifyClassLoader.java:53)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$Single
Slave.<init>(RecursiveReloadOnModifyClassLoader.java:149)
at
weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletCo
ntextImpl.java:1392)
at
weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImp
l.java:516)
at weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java,
Comp
iled Code)
at weblogic.t3.srvr.HttpServer.start(HttpServer.java:442)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
at weblogic.NTServiceHelper.run(NTServiceHelper.java:19)
at java.lang.Thread.run(Thread.java:479)
java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method
getClassLoa
dNotify()Lweblogic/boot/ClassLoadNotify; not found
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoa
der.java:140)
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoa
der.java:112)
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoa
der.java:104)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>
(RecursiveReloadOnModifyClassLoader.java:53)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$Single
Slave.<init>(RecursiveReloadOnModifyClassLoader.java:149)
at
weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletCo
ntextImpl.java:1392)
at
weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImp
l.java:516)
at weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java,
Comp
iled Code)
at weblogic.t3.srvr.HttpServer.start(HttpServer.java:442)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
at weblogic.NTServiceHelper.run(NTServiceHelper.java:19)
at java.lang.Thread.run(Thread.java:479)
WebLogic Server terminated with an abnormal condition of 1

I believe these should be in the weblogic.class.path, not here:
D:\weblogic\classes;D:\weblogic\lib\weblogicaux.jar;D:\webl
og
ic\myserver\clientclasses;D:\weblogic\myserver\serverclasseshttp://www.weblogic.com/docs51/install/startserver.html#1029223
Thanks,
Michael
"John J. Thomas" wrote:
>
Mike,
I'm getting the same error and I can't seem to figure it out?
JT
Mike DiChiappari wrote:
Before anyone reponds that boot.jar is not in the classpath, here is my
classpath (as printed from the command prompt). I start WLS from the
command
line (by typing "wlserver") after typing "setenv.cmd", which sets the
classpath shown below.
CLASSPATH=d:\weblogic\lib\weblogic510sp3boot.jar;d:\jdk1.2.2\lib\tools.jar;D
weblogic\license;D:\weblogic\classes;D:\weblogic\lib\weblogicaux.jar;D:\webl
og
ic\myserver\clientclasses;D:\weblogic\myserver\serverclasses
Mike
-----Original Message-----
From: Mike DiChiappari <[email protected]>
Newsgroups: weblogic.support.install
Date: Sunday, June 18, 2000 9:17 PM
Subject: WLS not starting with SP3
I believe I've followed the installation instructions for SP3. However I
get the error below when trying to start WLS (from the command line using
'wlserver.exe'). I've added weblogic510sp3boot.jar to the beginning of
CLASSPATH and have added weblogic510sp3.jar to the beginning of the WL
classpath (using wlconfig).
Any ideas what is going on?
Thanks,
Mike
The WebLogic Server did not start up properly.
Exception raised: java.lang.reflect.InvocationTargetException
java.lang.reflect.InvocationTargetException: java.lang.NoSuchMethodError:
weblog
ic.boot.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNo
tify; not found
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoa
der.java:140)
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoa
der.java:112)
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoa
der.java:104)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>
(RecursiveReloadOnModifyClassLoader.java:53)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$Single
Slave.<init>(RecursiveReloadOnModifyClassLoader.java:149)
at
weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletCo
ntextImpl.java:1392)
at
weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImp
l.java:516)
at weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java,
Comp
iled Code)
at weblogic.t3.srvr.HttpServer.start(HttpServer.java:442)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
at weblogic.NTServiceHelper.run(NTServiceHelper.java:19)
at java.lang.Thread.run(Thread.java:479)
java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method
getClassLoa
dNotify()Lweblogic/boot/ClassLoadNotify; not found
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoa
der.java:140)
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoa
der.java:112)
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoa
der.java:104)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>
(RecursiveReloadOnModifyClassLoader.java:53)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$Single
Slave.<init>(RecursiveReloadOnModifyClassLoader.java:149)
at
weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletCo
ntextImpl.java:1392)
at
weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImp
l.java:516)
at weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java,
Comp
iled Code)
at weblogic.t3.srvr.HttpServer.start(HttpServer.java:442)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
at weblogic.NTServiceHelper.run(NTServiceHelper.java:19)
at java.lang.Thread.run(Thread.java:479)
WebLogic Server terminated with an abnormal condition of 1
Thanks,
Michael
-- BEA WebLogic is hiring!
Check our website: http://www.bea.com/

My iphone can't back up to pc,because a session could not started with iphone.how fix the itunes

my iphone can't back up to pc,because a session could not started with iphone.how fix the itunes or iphone,this problem is after update ios7.0.4 and update itunes.pls teach me fix my pc,my pc is windows vista....

i have this problem too >> but i try other iphone ios7.0.3 i ok and work
but my ios7.0.4 cant back up and keep pop out session could not started with iphone !
really hope someone can help it ..
thank a lot !

[solved] xfce not starting with x

Similar Messages

Maybe you are looking for