[Solved] [XFCE] Unable to go to stanby after upgrading HAL

Hello,
Since I upgraded HAL to version 0.5.14-1 I can no longer to standby mode. I get a warning box saying that standby is only available with HAL and that HAL is not available. I checked with ps and hal is started.
Alphazo
Last edited by alphazo (2009-12-20 15:52:41)

Check if you upgraded pm-utils, this handles standby modes.
Btw, this is neither Xfce-specific nor a pacman upgrade issue, the package itself is fine, loss of functionality is due to code changes and not to package errors .

Similar Messages

[SOLVED] Xfce 4.10 problems - windows borderless after upgrade

minutes ago i update Xfce 4.8 to Xfce 4.10
to start again I find that open windows are borderless and can not be closed
i delete de files in ~/.config/xfce4 and ~/.cache/sessions but the problem continues...
I can do now??
Last edited by jesusangelm (2012-04-30 23:18:28)

Apologies for the double post,
removing xfwm4-tiling and xfwm4 --replace have fixed the issue
Thanks.
markbrazil wrote:
I have the same problem
I removed xfwm4-tiling and yes it appeared to fix the problem.
Just to make sure I rebooted and the problem is back.
Any other suggestions ?
jesusangelm wrote:
jjacky wrote:Seems like you still have an old (4.8) xfwm4 or something, as with 4.10 it should now use libxfce4util.so.6
Check again which version of xfwm4 you have installed (e.g. xfwm4 -V; pacman -Qi xfwm4; etc), and make sure to upgrade to the latest.
well, i found that i had installed xfwm4-tiling 4.8.3-1 ... i removed that and i install xfwm4 4.10.0-1 and solved problem!!!
thanks for the help!!!

I am unable to sync my iPad after upgrading to latest operating system. iTunes can't see my iPad when attached to PC. Anyone else having this problem?

I am unable to sync my iPad after upgrading to latest operating system. iTunes can't see my iPad when attached to PC. Anyone else having this problem?

Nicholas...
You may need to restart the Apple Mobile Device.
Follow the instructions here > iOS: Device not recognized in iTunes for Windows

Unable to use certain sites after upgrading to iOS 8.0.2

After upgrading (unintentionally) to iOS 8.0.2 I can no longer use certain sites that I regularly used previous to the upgrade. The bookmarked signon page comes up and is pre-populated with my userid and password. However the ipad does not respond when I touch the "logon" button on the screen. The screen is not responsive...almost seems frozen. This upgrade is useless to me if I cannot use these sites. Anyone else having these issues? Any solutions?

I do not have any issue in using Lync 2013 on my iPhone 6plus. Our corporate IT has solved the problem; I am not aware what all changes they had to do in the Lync server.

Unable to open mozilla firefox after upgrading

After upgrading at the suggestion of Yahoo, am unable to open M/F. Error message displayed as "The proxy server is refusing connections.
Repeat of earlier question as had wrong email address attached.

tks my 13yr old is now worshipful of your profound genius

Xfce 4.6 : no more X after upgrade !

I just ran a pacman -Syu.
I'm using gdm as a session manager,
and xfce4 as environnment.
After upgrade ... gdm login tell me
no exec line in session file xfce4
then tries to switch to a failsafe session... alas xterm does not exist (i never installed that old thing) => complete crash of gdm.
I tried to kill gdm (using gdm-stop),
and then startxfce4 from console. (no startx available btw !?)
This time it crashes, because xinit does not exist.
(i checked : noxinit in /usr/bin or whatnot)
What is missing there ?
Feels like the dependances are missing something, but what.
Help will be much appreciated ...

I reply to self.
first : I intalled xorg-xinit.
So i could run a x session without a fuss with startxfce4.
The gdm problem was too obvuous to be missed... so I missed it.
There was an empty file named :
/etc/X11/sessions/xfce4.desktop
and a full healthy file called
/etc/X11/sessions/xfce.desktop
Force GDM to use the right one, and I was done. (directly from GDM invite, "session" button)
Yet it is rather annoying for a newbie to be dropped to nothing but command line.
(like people I try to "sell" linux ease of use and upgrade ... or like me barely woke up on a sunday morning ;-) )
Last edited by skai (2009-03-01 11:32:13)

Unable to launch the application after upgrading Java to version 1.6.0_26

After upgrading Java to version 1.6.0_26 in Windows XP my web start throwing Exception. It works fine in Ubuntu with Java 1.6.0_24 and in Windows with older versions of Java 1.6.
Exception doesn't say anything:
java.lang.NullPointerException
       at com.sun.javaws.Launcher.executeApplication(Unknown Source)
       at com.sun.javaws.Launcher.executeMainClass(Unknown Source)
       at com.sun.javaws.Launcher.doLaunchApp(Unknown Source)
       at com.sun.javaws.Launcher.run(Unknown Source)
       at java.lang.Thread.run(Unknown Source)Same as java console ouput
Java Web Start 1.6.0_26
Using JRE version 1.6.0_26-b03 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\esod
c:   clear console window
f:   finalize objects on finalization queue
g:   garbage collect
h:   display this help message
m:   print memory usage
o:   trigger logging
p:   reload proxy configuration
q:   hide console
r:   reload policy configuration
s:   dump system and deployment properties
t:   dump thread list
v:   dump thread stack
0-5: set trace level to <n>
#### Java Web Start Error:
#### nullMy Jnlp file looks like this
<jnlp spec="1.0+">
<information>
   <title>Editor</title>
   <vendor>Comapny name</vendor>
   <homepage href="http://company_urll" />
   <description>Editor/description>
</information>
<resources>
   <j2se version="1.6+" />
   <property value="true" name="javaws.cfg.jauthenticator" />
   <jar href="http://192.168.79.33:7070/resources/applet/formeditor.jar" />
</resources>
<security>
   <all-permissions />
</security>
<application-desc main-class="pl.rdata.formeditor.FormEditor">
   <argument>[email protected]</argument>
   <argument>rLq3347491</argument>
   <argument>17</argument>
   <argument>
   http://192.168.79.33:7070/formeditor/formManagerService.service</argument>
   <argument>
   http://192.168.79.33:7070/formeditor/customDataTypeManager.service</argument>
   <argument>
   http://192.168.79.33:7070/formeditor/authorizationService.service</argument>
   <argument>2</argument>
</application-desc>
</jnlp>This application is self signed.
When I download jar file to disk I can run it with command java -jar and it works fine.
After downloading jar I made some tests changing line <jar href="http://192.168.79.33:7070/resources/applet/formeditor.jar" /> in Jnlp file.
When I changed it to <jar href="formeditor.jar" />, and have jar in folder it works.
When I changed it to <jar href="file:///C:/formeditor.jar"> it is not working (same exception).
In every case jar is download correctly and it pass verifying.
can anyone help?
Regards
Michal

867322 wrote:
When I changed it to <jar href="formeditor.jar" />, and have jar in folder it works.Okay, so you at least have a workaround.
can anyone help?Search the bugs database to see if someone else already reported this; if not create a new bug entry. Whatever mistake you could make, you should not be getting a NullPointerException as a result so this is at the very least a bug in the error handling of webstart.
But just some observations to try and see if you can make a difference (which is added input for your bug report). If I check JNLP examples, I see that the url specified is usually without a protocol, so it could be like this:
<jar href="/resources/applet/formeditor.jar" />The JNLP should be on the host that you service the jar from, so Webstart can fill in the host information for itself.
Also you provide a main-class; if the jar manifest specifies a main-class (and it should) you don't need to specify it in your JNLP file.

Unable to print from iPhoto after upgrading to Yosemite?

Whenever I want to print from iPhoto, the application on the IMac becomes unresponsive and will not print. This all started after upgrading to Yosemite. My printer is updated, so now I have no idea how to make this work again. Any help would be great.

DA2014 wrote:
Rebuilt iPhoto, it is updated, but still is unresponsive. I get the spinning wheel that never goes away until I force close the app. The printer works on other applications.
OK and I see the issue is only with iPhoto. The only thing I can think of is resetting the printing system and then re-installing the printer(s). DO NOT use any of the printer's software for installing, simply follow the directions for adding a printer in Mac Basics: Printing in OS X - Apple Support.
To reset the printing system, open System Preferences - Printers & Scanners - locate the device in the window on the left and right click the offending printer and select Reset Printing System....
After you have reset the printing system and re-added the device then shutdown (not restart) the computer for about 30 seconds and restart and then test.

Unable to install Aperture 3 after upgrade to OS X 10.8

After upgrading to OS X 10.8, when I try to install Aperture, I keep getting this error message "To open Aperture, Installer must quit and reopen". I have the box version of Aperture 3, so it's version 3.0 and I will not be able to download the latest dmg off Mac App Store. Any suggestion will be appreciated.

Try if this download link for the trial version still works: if yes, you can unlock it with your serial number from the boxed version:
http://appldnld.apple.com.edgesuite.net/content.info.apple.com/Aperture/061-8328 .20101020.AprE3/ApertureTrial3.1.dmg
To be able to run the installer in Mountain Lion you will have to change the System Preferences "Security & Privacy" temporarily to allow "Applications downloaded from anywhere"
Regards
Léonie

Unable to Activate my iPhone after Upgrade to iOS 7

Hello,
I can't activate my iPhone 4S after upgrade my device to iOS7.
Error Message: Your iPhone could not be activated because the activation server cannot be reached. try connecting your iPhone to iTunes to activate it, or try again in ciuple ot minutes.
Please help me I am stuck in this page more than 2H and I cannot use my iPhone anymore.

I had something similar (wouldn't connect to my router). I just reset the router, and it went like a dream from there. Myabe your problem too? Good luck.

Unable to see Youtube videos after upgrade to SL

Hi All,
After upgrading my MacBook Pro to SL from a recently installed and very clean (and updated just 2 days ago) Leopard system, I suddenly cannot watch any youtube videos at youtube.com
Where the video should be it is all pitch black.
Right clicking says "Movie not loaded..." followed by "About Adobe Flash Player 10" in the next line.
However I can watch youtube videos embedded at other sites (reddit.com) as well as when I press the top right button (windows mode) at youtube.com.
I do not use anything weird and have not seen any errors in console related to Safari.
I do not get this problem on my iMac which has been upgraded to SL as well without any issues!
Any ideas?
Message was edited by: Vano21

If the issue is limited to your user account try starting up Safe Mode (It will take more time to startup in Safe Mode because it runs a directory check.)
If your apps functions correctly that way, go to System Preferences >> Accounts >> Login Items, and remove them. Boot normally and test. If not go to ~(yourHome)/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving ~(yourHome)/Library/Fonts to your desktop and restarting.
Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
-mj

Lion Mail unable to receive Gmail anymore after upgrade

After upgrading my system to Lion. I launched Mail 5.0, the app went through the conversion process and opened fine. Once in there I can't receive email from my Gmail account, but I can send. Anyone know a fix? My current settings are:
Incoming Server: imap.gmail.com
User Name: my gmail address
Port: 995 with SSL
Outgoing Server: smtp.gmail.com
User Name: my gmail address
Port: 465 with SSL

+1 also... No idea why this isn't working. Everything is set up exactly as it was in mail previous to my Lion upgrade. All of a sudden, no gmail connectivity at all...

Unable to receive Yahoo mail after upgrading to iOS 5.01

Need help resolve problem on receiving Yahoo mails after upgrading to iOS 5.01

After upgrading to 5.01, I also am having problems with receiving Yahoo emails. Some emails seems to get pushed and download fine from the server. Emails with attachments will show up one minute and then disappear off the screen again. I know they are not being deleted because I can check them on my laptop just fine. When I do get an email to stay on the screen, it says "this message has not been downloaded from the server." At random times, yahoo will try to check for mail and say connection failed to server or something like this. This only started happening since 5.01. I have also tried recreating the account on the phone, but that did not help. Any ideas?

Unable to download movies (mp4) after upgrade to leopard

After upgrading to Snow Leopard 10.6.8 I have not been able to download any more movies.
I save link to desktop and the format line says: Quicktime Player D. But after downloading here is the message upon trying to open movie:
"The document “FIRST AID KIT BASICS MOVIE 18-52-52” could not be opened. QuickTime Player cannot open files in the “data” format."
I did update Quicktime - had a bunch of other issues with other programs after upgrading operating system but those are all taken care of now. This remains my only problem.
Found a solution suggesting to update Flip4mac which I did. Now I get “the document.....could not be opened. The movie is not in a format that QuickTime Player understands."
Thanks.
Nancy

Do you have enough storage space left on the iPad in order to download the movie?
Do you have restrictions enabled? Settings>General>Restrictions>On Then set to Off.
Are you signed into the correct account on the iPad using the correct Apple ID?
Are you trying to download over 3G? There is a 20MB download limit with 3G.

Iphone 4 unable to connect to wifi after upgrade to ios6.1

After upgrading to ios 6.1 iphone 4 will not recognise wifi stations. Any ideas?

go to Settings > General > Network and turn Cellular Data off, then to the Wi-Fi options and select the network to connect to? Once connected, go back to Cellular Data and turn the option back on

[Solved] [XFCE] Unable to go to stanby after upgrading HAL

Similar Messages

Maybe you are looking for