[SOLVED].xinitrc - some entries doesn't work
Hey. There are problems with my .xinitrc. I tried to turn off the DPMS with it (configuring xorg.conf never changed the behaviour of dpms) by inserting the line "xset s off && xset -dpms". But it just doesn't do what I expecting from it, DPMS is still active and I don't know how to use the line without the terminal. I also tried to use "killall xfce4-panel" in the .xinitrc but it just doesn't execute it.
So how do I execute those commands when I'm starting Xorg?
Here's my .xinitrc.
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
xset s off
xset -dpms
xsetroot -cursor_name left_ptr
#setxkbmap -layout de
xbindkeys
numlockx &
exec startxfce4
killall xfce4-panel
#exec xfwm4 xfdesktop xfce4-session
exec xmonad
Xorg is started by .bash_profile after login:
# ~/.bash_profile
[[ -z $DISPLAY && $XDG_VTNR -eq 1 ]] && exec startx
[[ -f ~/.bashrc ]] && . ~/.bashrc
Last edited by Dun (2015-02-02 22:10:22)
Thank you very much guys, I cleaned the messed up .xinitrc and deactivated DPMS and the panel over xfce4-settings which I didn't checked at all. Feeling a little bit dumb now :>
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
#sudo ntpdate -u 0.de.pool.ntp.org
xsetroot -cursor_name left_ptr
xbindkeys
numlockx &
exec startxfce4
Similar Messages
-
Replay video in Muse (some controls doesn't work)
Hello colleagues,
Can't understand what is happening. I put a video in the Animate and assign controls for buttons (for example, replay video from 0:00 sec). For stage and video autoplay function are disabled.
Then I export the oam-file and insert it into the Muse with a Scroll Effect "Edge Animate" (Autoplay) to play the video at a certain point. Video starts correctly, but some controls doesn'n work, for example, "replay video". Along with this function "Toggle video play/pause" works correcly.
Actually, I want to loop video playback but it doesn't work in the Muse (Loop function for a video).
Can anybody recommend a solution?
Thanks!Hello Joe,
This is very interesting, but when I upload the project from Muse to my FTP-server, everything is working properly in all of browsers, all of controls and loop for the video clip. I found it by accident when I lost all hope. In other words, the problem is only when previewing the page in a browser (via the built-in local server). Maybe this is a question for the team Muse? Anyway I can send it in PM.
Thanks for your reply,
Alexander -
After las update (9.2.1) some menus doesn't work properly. Ther is non possibility to use mouse. Why?
Operating System?
-
I have ipad with IOS 7, Some apps doesn' t work, safari not open some web site. What can I do?
Try this and see if it helps.
Settings>Safari>Clear cookies and data.
Now close Safari completely. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then "swipe up" or "drag up" on the app preview thumbnail to close it.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
SoftKeyboardType property of StageText : some values doesn't work on Android
Hello,
on my Galaxy Nexus Android 4.2.2, when I use the softKeyboardType property of StageText :
"number" and "email" work,
but "punctuation", "url", and "contact" doesn't work.
http://help.adobe.com/en_US/FlashPlatform/beta/reference/actionscript/3/flash/text/StageTe xt.html#softKeyboardType
Why some values doesn't work ?
I need the constant "punctuation", please help.
ThanksHi,
Thank you for your bug report. We are able to reproduce the issue. Could you please open a new bug report on this over at bugbase.adobe.com? Once the bug has been added would you mind posting back with the URL so that others affected can add their votes and comments?
Thanks once again for reporting this.
-Nimit -
[SOLVED]Xorg 1.8 doesn't work
Hello, I've just upgraded to linux-firmware and the newest X.org, which doesn't work.
Xorg.0.log tells me:
[ 934.318]
X.Org X Server 1.8.1
Release Date: 2010-05-11
[ 934.322] X Protocol Version 11, Revision 0
[ 934.323] Build Operating System: Linux 2.6.33-ARCH x86_64
[ 934.325] Current Operating System: Linux staerseus 2.6.34-ARCH #1 SMP PREEMPT Sat Jun 19 00:07:49 CEST 2010 x86_64
[ 934.326] Kernel command line: root=/dev/disk/by-uuid/727c4683-ee4c-4b32-8a59-370264cb7d9f ro i915.modeset=1 init=/sbin/bootchartd
[ 934.327] Build Date: 26 May 2010 07:50:07PM
[ 934.329]
[ 934.330] Current version of pixman: 0.18.2
[ 934.331] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 934.334] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 934.338] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 21 10:15:38 2010
[ 934.340] (==) Using config file: "/etc/X11/xorg.conf"
[ 934.341] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 934.343] (==) No Layout section. Using the first Screen section.
[ 934.343] (==) No screen section available. Using defaults.
[ 934.343] (**) |-->Screen "Default Screen Section" (0)
[ 934.343] (**) | |-->Monitor "<default monitor>"
[ 934.343] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 934.343] (==) Automatically adding devices
[ 934.343] (==) Automatically enabling devices
[ 934.343] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 934.343] Entry deleted from font path.
[ 934.343] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 934.343] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 934.343] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 934.343] (II) Loader magic: 0x7ce880
[ 934.343] (II) Module ABI versions:
[ 934.343] X.Org ANSI C Emulation: 0.4
[ 934.343] X.Org Video Driver: 7.0
[ 934.343] X.Org XInput driver : 9.0
[ 934.343] X.Org Server Extension : 3.0
[ 934.352] (--) PCI:*(0:0:2:0) 8086:2a42:1734:113f Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf2400000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[ 934.352] (--) PCI: (0:0:2:1) 8086:2a43:1734:113f Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf2100000/1048576
[ 934.352] (II) Open ACPI successful (/var/run/acpid.socket)
[ 934.352] (II) LoadModule: "extmod"
[ 934.352] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 934.352] (II) Module extmod: vendor="X.Org Foundation"
[ 934.352] compiled for 1.8.1, module version = 1.0.0
[ 934.352] Module class: X.Org Server Extension
[ 934.352] ABI class: X.Org Server Extension, version 3.0
[ 934.352] (II) Loading extension MIT-SCREEN-SAVER
[ 934.352] (II) Loading extension XFree86-VidModeExtension
[ 934.352] (II) Loading extension XFree86-DGA
[ 934.352] (II) Loading extension DPMS
[ 934.352] (II) Loading extension XVideo
[ 934.352] (II) Loading extension XVideo-MotionCompensation
[ 934.352] (II) Loading extension X-Resource
[ 934.352] (II) LoadModule: "dbe"
[ 934.352] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 934.352] (II) Module dbe: vendor="X.Org Foundation"
[ 934.353] compiled for 1.8.1, module version = 1.0.0
[ 934.353] Module class: X.Org Server Extension
[ 934.353] ABI class: X.Org Server Extension, version 3.0
[ 934.353] (II) Loading extension DOUBLE-BUFFER
[ 934.353] (II) LoadModule: "glx"
[ 934.353] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 934.353] (II) Module glx: vendor="X.Org Foundation"
[ 934.353] compiled for 1.8.1, module version = 1.0.0
[ 934.353] ABI class: X.Org Server Extension, version 3.0
[ 934.353] (==) AIGLX enabled
[ 934.353] (II) Loading extension GLX
[ 934.353] (II) LoadModule: "record"
[ 934.353] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 934.353] (II) Module record: vendor="X.Org Foundation"
[ 934.353] compiled for 1.8.1, module version = 1.13.0
[ 934.353] Module class: X.Org Server Extension
[ 934.353] ABI class: X.Org Server Extension, version 3.0
[ 934.353] (II) Loading extension RECORD
[ 934.353] (II) LoadModule: "dri"
[ 934.353] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 934.353] (II) Module dri: vendor="X.Org Foundation"
[ 934.353] compiled for 1.8.1, module version = 1.0.0
[ 934.353] ABI class: X.Org Server Extension, version 3.0
[ 934.353] (II) Loading extension XFree86-DRI
[ 934.354] (II) LoadModule: "dri2"
[ 934.354] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 934.354] (II) Module dri2: vendor="X.Org Foundation"
[ 934.354] compiled for 1.8.1, module version = 1.2.0
[ 934.354] ABI class: X.Org Server Extension, version 3.0
[ 934.354] (II) Loading extension DRI2
[ 934.354] (==) Matched intel as autoconfigured driver 0
[ 934.354] (==) Matched vesa as autoconfigured driver 1
[ 934.354] (==) Matched fbdev as autoconfigured driver 2
[ 934.354] (==) Assigned the driver to the xf86ConfigLayout
[ 934.354] (II) LoadModule: "intel"
[ 934.354] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 934.354] (II) Module intel: vendor="X.Org Foundation"
[ 934.354] compiled for 1.7.6, module version = 2.11.0
[ 934.354] Module class: X.Org Video Driver
[ 934.354] ABI class: X.Org Video Driver, version 6.0
[ 934.354] (EE) module ABI major version (6) doesn't match the server's version (7)
[ 934.356] (II) UnloadModule: "intel"
[ 934.356] (II) Unloading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 934.356] (EE) Failed to load module "intel" (module requirement mismatch, 0)
[ 934.357] (II) LoadModule: "vesa"
[ 934.357] (WW) Warning, couldn't open module vesa
[ 934.357] (II) UnloadModule: "vesa"
[ 934.357] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 934.359] (II) LoadModule: "fbdev"
[ 934.359] (WW) Warning, couldn't open module fbdev
[ 934.359] (II) UnloadModule: "fbdev"
[ 934.359] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 934.360] (EE) No drivers available.
[ 934.362]
Fatal server error:
[ 934.364] no screens found
[ 934.365]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 934.370] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 934.372]
What does the problem with modules mean? Archlinux was warning me, that "in future releases /etc/modprobe.d/framebuffer_blacklist.conf.save will be ignored, but it is the same file as /etc/modprobe.d/framebuffer_blacklist.conf.
I don't understand, why it cannot find any screens (I use a laptop screen)
I tried to start with and without xorg.conf, which is:
Section "Device"
Identifier "Intel X4500MHD"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 4 Series Chipset Integrated Graphics Controller"
BusID "PCI:0:2:0"
Option "DRI" "true"
Option "AccelMethod" "uxa"
Option "MigrationHeuristic" "greedy"
EndSection
The graphic driver I use is xf86-video-intel-newest from archstuff, but it is the same version as xf86-video-intel.
I am not sure if I provided all needed info, but I hope so. Thank you for your help.SOLVED
Last edited by Staerseus (2010-06-21 09:18:03)Use the arch version. It is actually built against the xorg version that you are using... here is the relevant section of your log:
[ 934.354] (EE) module ABI major version (6) doesn't match the server's version (7) -
[SOLVED] - xset at startup doesn't work
I use the following command to set my screensaver options
xset dpms 30 60 300
After reading the Arch wiki, I found out that this can be made permanent by adding this to the xorg.conf or putting it in ~/.xprofile
Contents of xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Tue Dec 8 21:04:28 PST 2009
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "StandbyTime" "2"
Option "SuspendTime" "3"
Option "OffTime" "5"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Dell Inspiron 1520 WXGA+ LCD"
VendorName "Dell"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "NoLogo" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "Device" "/dev/input/mouse0"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.06"
Option "MaxSpeed" "0.12"
Option "AccelFactor" "0.0010"
Option "SHMConfig" "on"
Option "CircularScrolling" "1"
Option "CircScrollTrigger" "0"
EndSection
Section "ServerFlags"
Option "DontZap" "false"
Option "BlankTime" "0.1"
Option "StandbyTime" "0.5"
Option "SuspendTime" "1"
Option "OffTime" "5"
EndSection
Contents of ~/.xprofile
xset dpms 30 60 300
I even added this to crontab
0 * * * * ~/Wallpapers/change-background-folder.py
0 * * * * /usr/bin/xset s 30
0 * * * * /usr/bin/xset dpms 60 120 300
@reboot ID=screensaver AFTER=2m /usr/bin/xset s 30
@reboot ID=monitor AFTER=2m /usr/bin/xset dpms 60 120 300
@reboot ID=vu AFTER=1m vuze
Still after doing all this, when I give xset q after a reboot, I get
[theta@boolean-pc ~]$ xset q
Keyboard Control:
auto repeat: on key click percent: 0 LED mask: 00000000
XKB indicators:
00: Caps Lock: off 01: Num Lock: off 02: Scroll Lock: off
03: Compose: off 04: Kana: off 05: Sleep: off
06: Suspend: off 07: Mute: off 08: Misc: off
09: Mail: off 10: Charging: off 11: Shift Lock: off
12: Group 2: off 13: Mouse Keys: off
auto repeat delay: 500 repeat rate: 30
auto repeating keys: 00ffffffdffffbbf
fadfffefffedffff
9fffffffffffffff
fff7ffffffffffff
bell percent: 50 bell pitch: 400 bell duration: 100
Pointer Control:
acceleration: 3/1 threshold: 4
Screen Saver:
prefer blanking: yes allow exposures: yes
timeout: 600 cycle: 600
Colors:
default colormap: 0x20 BlackPixel: 0 WhitePixel: 16777215
Font Path:
/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,/usr/share/fonts/100dpi/,/usr/share/fonts/75dpi/,built-ins
DPMS (Energy Star):
Standby: 0 Suspend: 0 Off: 0
DPMS is Enabled
Monitor is On
Font cache:
Server does not have the FontCache Extension
The parameters are still all 0.
Please suggest a solution.
Apoorv
Last edited by theta (2011-08-02 15:56:06)jasonwryan wrote:
If you have set up your .xinitrc the way karol suggests and it still doesn't work, you could delay it kicking in until X has finished loading
(sleep 15s && xset dpms 30 60 300) &
exec yourwm
That may get around the problem bernarcher describes...
Thank you! This works very well for me.
It's the only way I can get it to work.
For the records, so the smart people can find the problem, here is my xorg.conf:
Section "ServerLayout"
Identifier "ServerLayout0"
Screen 0 "BenQ" 0 0
#Option "BlankTime" "0"
Option "StandbyTime" "10"
Option "SuspendTime" "20"
Option "OffTime" "30"
EndSection
Section "Screen"
Identifier "BenQ"
Device "Intel4000"
Monitor "HDMI2"
DefaultDepth 24
SubSection "Display"
#Depth "24"
EndSubSection
EndSection
Section "Monitor"
Identifier "HDMI2"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Intel4000"
Driver "intel"
BusID "PCI:0:2:0"
Option "AccelMethod" "sna"
Option "TearFree" "true"
EndSection
# Read and parsed by systemd-localed. It's probably wise not to edit this manually too freely.
Section "InputClass"
Identifier "system-keyboard"
MatchIsKeyboard "on"
Option "XkbLayout" "se"
EndSection
# Catch-all evdev loader for udev-based systems
# We don't simply match on any device since that also adds accelerometers
# and other devices that we don't really want to use. The list below
# matches everything but joysticks.
Section "InputClass"
Identifier "evdev pointer catchall"
MatchIsPointer "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev keyboard catchall"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchpad catchall"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev tablet catchall"
MatchIsTablet "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchscreen catchall"
MatchIsTouchscreen "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Xorg seems to not care about my settings in xorg.conf and sets DPMS values to "0":
$ xset -q
Keyboard Control:
auto repeat: on key click percent: 0 LED mask: 00000002
XKB indicators:
00: Caps Lock: off 01: Num Lock: on 02: Scroll Lock: off
03: Compose: off 04: Kana: off 05: Sleep: off
06: Suspend: off 07: Mute: off 08: Misc: off
09: Mail: off 10: Charging: off 11: Shift Lock: off
12: Group 2: off 13: Mouse Keys: off
auto repeat delay: 500 repeat rate: 33
auto repeating keys: 00ffffffdffffbbf
fadfffefffedffff
9fffffffffffffff
fff7ffffffffffff
bell percent: 50 bell pitch: 400 bell duration: 100
Pointer Control:
acceleration: 2/1 threshold: 4
Screen Saver:
prefer blanking: yes allow exposures: yes
timeout: 0 cycle: 0
Colors:
default colormap: 0x22 BlackPixel: 0x0 WhitePixel: 0xffffff
Font Path:
/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,built-ins
DPMS (Energy Star):
Standby: 0 Suspend: 0 Off: 0
DPMS is Enabled
Monitor is On
And the xorg log:
[ 17738.153]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 17738.194] X Protocol Version 11, Revision 0
[ 17738.208] Build Operating System: Linux 3.14.0-4-ARCH x86_64
[ 17738.223] Current Operating System: Linux arch6 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 20:40:47 CEST 2014 x86_64
[ 17738.223] Kernel command line: console=tty0 xen-pciback.hide=(01:00.0)(01:00.1)(03:00.0)(02:00.0)(00:14.0)(00:1d.0) root=/dev/VG/Aroot rw
[ 17738.254] Build Date: 14 April 2014 08:39:09AM
[ 17738.269]
[ 17738.285] Current version of pixman: 0.32.4
[ 17738.314] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 17738.314] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 17738.375] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 29 22:10:19 2014
[ 17738.390] (==) Using config file: "/etc/X11/xorg.conf"
[ 17738.406] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 17738.406] (==) ServerLayout "ServerLayout0"
[ 17738.406] (**) |-->Screen "BenQ" (0)
[ 17738.406] (**) | |-->Monitor "HDMI2"
[ 17738.406] (**) | |-->Device "Intel4000"
[ 17738.406] (**) Option "StandbyTime" "10"
[ 17738.406] (**) Option "SuspendTime" "20"
[ 17738.406] (**) Option "OffTime" "30"
[ 17738.406] (==) Automatically adding devices
[ 17738.406] (==) Automatically enabling devices
[ 17738.406] (==) Automatically adding GPU devices
[ 17738.406] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 17738.406] Entry deleted from font path.
[ 17738.406] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 17738.406] Entry deleted from font path.
[ 17738.406] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 17738.406] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 17738.406] Entry deleted from font path.
[ 17738.406] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 17738.406] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 17738.406] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 17738.406] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 17738.406] (II) Loader magic: 0x804c80
[ 17738.406] (II) Module ABI versions:
[ 17738.406] X.Org ANSI C Emulation: 0.4
[ 17738.406] X.Org Video Driver: 15.0
[ 17738.406] X.Org XInput driver : 20.0
[ 17738.406] X.Org Server Extension : 8.0
[ 17738.406] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 17738.408] (--) PCI:*(0:0:2:0) 8086:0162:1458:d000 rev 9, Mem @ 0xf4400000/4194304, 0xc0000000/268435456, I/O @ 0x0000f000/64
[ 17738.408] (--) PCI: (0:1:0:0) 1002:67b1:1002:0b00 rev 0, Mem @ 0xd0000000/268435456, 0xe0000000/8388608, 0xf4b00000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 17738.408] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 17738.424] Initializing built-in extension Generic Event Extension
[ 17738.439] Initializing built-in extension SHAPE
[ 17738.454] Initializing built-in extension MIT-SHM
[ 17738.468] Initializing built-in extension XInputExtension
[ 17738.482] Initializing built-in extension XTEST
[ 17738.495] Initializing built-in extension BIG-REQUESTS
[ 17738.509] Initializing built-in extension SYNC
[ 17738.523] Initializing built-in extension XKEYBOARD
[ 17738.536] Initializing built-in extension XC-MISC
[ 17738.548] Initializing built-in extension SECURITY
[ 17738.561] Initializing built-in extension XINERAMA
[ 17738.573] Initializing built-in extension XFIXES
[ 17738.585] Initializing built-in extension RENDER
[ 17738.597] Initializing built-in extension RANDR
[ 17738.608] Initializing built-in extension COMPOSITE
[ 17738.620] Initializing built-in extension DAMAGE
[ 17738.631] Initializing built-in extension MIT-SCREEN-SAVER
[ 17738.643] Initializing built-in extension DOUBLE-BUFFER
[ 17738.654] Initializing built-in extension RECORD
[ 17738.665] Initializing built-in extension DPMS
[ 17738.677] Initializing built-in extension Present
[ 17738.688] Initializing built-in extension DRI3
[ 17738.700] Initializing built-in extension X-Resource
[ 17738.711] Initializing built-in extension XVideo
[ 17738.722] Initializing built-in extension XVideo-MotionCompensation
[ 17738.734] Initializing built-in extension XFree86-VidModeExtension
[ 17738.746] Initializing built-in extension XFree86-DGA
[ 17738.757] Initializing built-in extension XFree86-DRI
[ 17738.769] Initializing built-in extension DRI2
[ 17738.769] (II) "glx" will be loaded by default.
[ 17738.769] (II) LoadModule: "dri2"
[ 17738.769] (II) Module "dri2" already built-in
[ 17738.769] (II) LoadModule: "glamoregl"
[ 17738.769] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 17738.770] (II) Module glamoregl: vendor="X.Org Foundation"
[ 17738.770] compiled for 1.15.0, module version = 0.6.0
[ 17738.770] ABI class: X.Org ANSI C Emulation, version 0.4
[ 17738.770] (II) LoadModule: "glx"
[ 17738.770] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 17738.770] (II) Module glx: vendor="X.Org Foundation"
[ 17738.770] compiled for 1.15.1, module version = 1.0.0
[ 17738.771] ABI class: X.Org Server Extension, version 8.0
[ 17738.771] (==) AIGLX enabled
[ 17738.782] Loading extension GLX
[ 17738.782] (II) LoadModule: "intel"
[ 17738.782] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 17738.782] (II) Module intel: vendor="X.Org Foundation"
[ 17738.783] compiled for 1.15.0, module version = 2.99.911
[ 17738.783] Module class: X.Org Video Driver
[ 17738.783] ABI class: X.Org Video Driver, version 15.0
[ 17738.783] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 17738.783] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
[ 17738.783] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
[ 17738.783] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
[ 17738.783] (++) using VT number 1
[ 17738.783] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[ 17738.783] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 17738.783] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[ 17738.783] (==) intel(0): RGB weight 888
[ 17738.783] (==) intel(0): Default visual is TrueColor
[ 17738.783] (**) intel(0): Option "AccelMethod" "sna"
[ 17738.783] (**) intel(0): Option "TearFree" "true"
[ 17738.783] (**) intel(0): Framebuffer tiled
[ 17738.784] (**) intel(0): Pixmaps tiled
[ 17738.784] (**) intel(0): "Tear free" enabled
[ 17738.784] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 17738.784] (II) intel(0): Output VGA1 using monitor section HDMI2
[ 17738.784] (II) intel(0): Output HDMI1 has no monitor section
[ 17738.784] (II) intel(0): Output DP1 has no monitor section
[ 17738.784] (II) intel(0): Output HDMI2 using monitor section HDMI2
[ 17738.784] (II) intel(0): Output DP2 has no monitor section
[ 17738.784] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 17738.784] (--) intel(0): Output HDMI2 using initial mode 1920x1080 on pipe 0
[ 17738.784] (==) intel(0): DPI set to (96, 96)
[ 17738.784] (II) Loading sub module "dri2"
[ 17738.784] (II) LoadModule: "dri2"
[ 17738.784] (II) Module "dri2" already built-in
[ 17738.784] (==) Depth 24 pixmap format is 32 bpp
[ 17738.784] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[ 17738.784] (==) intel(0): Backing store enabled
[ 17738.784] (==) intel(0): Silken mouse enabled
[ 17738.784] (II) intel(0): HW Cursor enabled
[ 17738.784] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 17738.784] (**) intel(0): DPMS enabled
[ 17738.784] (II) intel(0): [DRI2] Setup complete
[ 17738.784] (II) intel(0): [DRI2] DRI driver: i965
[ 17738.784] (II) intel(0): [DRI2] VDPAU driver: i965
[ 17738.784] (II) intel(0): direct rendering: DRI2 Enabled
[ 17738.784] (==) intel(0): hotplug detection: "enabled"
[ 17738.784] (--) RandR disabled
[ 17738.789] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 17738.789] (II) AIGLX: enabled GLX_ARB_create_context
[ 17738.789] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 17738.789] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 17738.789] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 17738.789] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 17738.789] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 17738.789] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 17738.789] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 17738.789] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 17738.789] (II) AIGLX: Loaded and initialized i965
[ 17738.789] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 17738.791] (II) intel(0): switch to mode [email protected] on HDMI2 using pipe 0, position (0, 0), rotation normal, reflection none
[ 17738.801] (II) intel(0): Setting screen physical size to 508 x 285
[ 17738.839] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 17738.839] (**) Power Button: Applying InputClass "system-keyboard"
[ 17738.839] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 17738.839] (II) LoadModule: "evdev"
[ 17738.839] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 17738.840] (II) Module evdev: vendor="X.Org Foundation"
[ 17738.840] compiled for 1.15.0, module version = 2.8.2
[ 17738.840] Module class: X.Org XInput Driver
[ 17738.840] ABI class: X.Org XInput driver, version 20.0
[ 17738.840] (II) Using input driver 'evdev' for 'Power Button'
[ 17738.840] (**) Power Button: always reports core events
[ 17738.840] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 17738.840] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 17738.840] (--) evdev: Power Button: Found keys
[ 17738.840] (II) evdev: Power Button: Configuring as keyboard
[ 17738.840] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 17738.840] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 17738.840] (**) Option "xkb_rules" "evdev"
[ 17738.840] (**) Option "xkb_model" "pc104"
[ 17738.840] (**) Option "xkb_layout" "se"
[ 17738.870] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[ 17738.870] (**) Video Bus: Applying InputClass "system-keyboard"
[ 17738.870] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 17738.870] (II) Using input driver 'evdev' for 'Video Bus'
[ 17738.870] (**) Video Bus: always reports core events
[ 17738.870] (**) evdev: Video Bus: Device: "/dev/input/event2"
[ 17738.871] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 17738.871] (--) evdev: Video Bus: Found keys
[ 17738.871] (II) evdev: Video Bus: Configuring as keyboard
[ 17738.871] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input2/event2"
[ 17738.871] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 17738.871] (**) Option "xkb_rules" "evdev"
[ 17738.871] (**) Option "xkb_model" "pc104"
[ 17738.871] (**) Option "xkb_layout" "se"
[ 17738.871] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 17738.871] (**) Power Button: Applying InputClass "system-keyboard"
[ 17738.871] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 17738.871] (II) Using input driver 'evdev' for 'Power Button'
[ 17738.871] (**) Power Button: always reports core events
[ 17738.871] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 17738.871] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 17738.871] (--) evdev: Power Button: Found keys
[ 17738.871] (II) evdev: Power Button: Configuring as keyboard
[ 17738.871] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 17738.871] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 17738.871] (**) Option "xkb_rules" "evdev"
[ 17738.871] (**) Option "xkb_model" "pc104"
[ 17738.871] (**) Option "xkb_layout" "se"
[ 17738.871] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 17738.872] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event3)
[ 17738.872] (**) Microsoft Wired Keyboard 600: Applying InputClass "system-keyboard"
[ 17738.872] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
[ 17738.872] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
[ 17738.872] (**) Microsoft Wired Keyboard 600: always reports core events
[ 17738.872] (**) evdev: Microsoft Wired Keyboard 600: Device: "/dev/input/event3"
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Vendor 0x45e Product 0x750
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found keys
[ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: Configuring as keyboard
[ 17738.872] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:045E:0750.0001/input/input5/event3"
[ 17738.872] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD, id 9)
[ 17738.872] (**) Option "xkb_rules" "evdev"
[ 17738.872] (**) Option "xkb_model" "pc104"
[ 17738.872] (**) Option "xkb_layout" "se"
[ 17738.872] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event4)
[ 17738.872] (**) Microsoft Wired Keyboard 600: Applying InputClass "system-keyboard"
[ 17738.872] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
[ 17738.872] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
[ 17738.872] (**) Microsoft Wired Keyboard 600: always reports core events
[ 17738.872] (**) evdev: Microsoft Wired Keyboard 600: Device: "/dev/input/event4"
[ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: Using mtdev for this device
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Vendor 0x45e Product 0x750
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found 1 mouse buttons
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found scroll wheel(s)
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found relative axes
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found absolute axes
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found absolute multitouch axes
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found x and y absolute axes
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found keys
[ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: Forcing relative x/y axes to exist.
[ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: Configuring as mouse
[ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: Configuring as keyboard
[ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: Adding scrollwheel support
[ 17738.872] (**) evdev: Microsoft Wired Keyboard 600: YAxisMapping: buttons 4 and 5
[ 17738.872] (**) evdev: Microsoft Wired Keyboard 600: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 17738.872] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:045E:0750.0002/input/input6/event4"
[ 17738.872] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD, id 10)
[ 17738.872] (**) Option "xkb_rules" "evdev"
[ 17738.872] (**) Option "xkb_model" "pc104"
[ 17738.872] (**) Option "xkb_layout" "se"
[ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: initialized for relative axes.
[ 17738.873] (WW) evdev: Microsoft Wired Keyboard 600: ignoring absolute axes.
[ 17738.873] (**) Microsoft Wired Keyboard 600: (accel) keeping acceleration scheme 1
[ 17738.873] (**) Microsoft Wired Keyboard 600: (accel) acceleration profile 0
[ 17738.873] (**) Microsoft Wired Keyboard 600: (accel) acceleration factor: 2.000
[ 17738.873] (**) Microsoft Wired Keyboard 600: (accel) acceleration threshold: 4
[ 17738.873] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/js0)
[ 17738.873] (**) Microsoft Wired Keyboard 600: Applying InputClass "system-keyboard"
[ 17738.873] (II) No input driver specified, ignoring this device.
[ 17738.873] (II) This device may have been added with another device file.
[ 17738.873] (II) config/udev: Adding input device A..... G3 (/dev/input/event5)
[ 17738.873] (**) A..... G3: Applying InputClass "evdev pointer catchall"
[ 17738.873] (II) Using input driver 'evdev' for 'A..... G3'
[ 17738.873] (**) A..... G3: always reports core events
[ 17738.873] (**) evdev: A..... G3: Device: "/dev/input/event5"
[ 17738.873] (--) evdev: A..... G3: Vendor 0xe0ff Product 0x2
[ 17738.873] (--) evdev: A..... G3: Found 12 mouse buttons
[ 17738.873] (--) evdev: A..... G3: Found scroll wheel(s)
[ 17738.873] (--) evdev: A..... G3: Found relative axes
[ 17738.873] (--) evdev: A..... G3: Found x and y relative axes
[ 17738.873] (II) evdev: A..... G3: Configuring as mouse
[ 17738.873] (II) evdev: A..... G3: Adding scrollwheel support
[ 17738.873] (**) evdev: A..... G3: YAxisMapping: buttons 4 and 5
[ 17738.873] (**) evdev: A..... G3: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 17738.873] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/0003:E0FF:0002.0003/input/input7/event5"
[ 17738.873] (II) XINPUT: Adding extended input device "A..... G3" (type: MOUSE, id 11)
[ 17738.873] (II) evdev: A..... G3: initialized for relative axes.
[ 17738.873] (**) A..... G3: (accel) keeping acceleration scheme 1
[ 17738.873] (**) A..... G3: (accel) acceleration profile 0
[ 17738.873] (**) A..... G3: (accel) acceleration factor: 2.000
[ 17738.873] (**) A..... G3: (accel) acceleration threshold: 4
[ 17738.874] (II) config/udev: Adding input device A..... G3 (/dev/input/mouse0)
[ 17738.874] (II) No input driver specified, ignoring this device.
[ 17738.874] (II) This device may have been added with another device file.
[ 17738.874] (II) config/udev: Adding input device A..... G3 (/dev/input/event6)
[ 17738.874] (**) A..... G3: Applying InputClass "system-keyboard"
[ 17738.874] (**) A..... G3: Applying InputClass "evdev keyboard catchall"
[ 17738.874] (II) Using input driver 'evdev' for 'A..... G3'
[ 17738.874] (**) A..... G3: always reports core events
[ 17738.874] (**) evdev: A..... G3: Device: "/dev/input/event6"
[ 17738.874] (--) evdev: A..... G3: Vendor 0xe0ff Product 0x2
[ 17738.874] (--) evdev: A..... G3: Found 1 mouse buttons
[ 17738.874] (--) evdev: A..... G3: Found scroll wheel(s)
[ 17738.874] (--) evdev: A..... G3: Found relative axes
[ 17738.874] (II) evdev: A..... G3: Forcing relative x/y axes to exist.
[ 17738.874] (--) evdev: A..... G3: Found absolute axes
[ 17738.874] (II) evdev: A..... G3: Forcing absolute x/y axes to exist.
[ 17738.874] (--) evdev: A..... G3: Found keys
[ 17738.874] (II) evdev: A..... G3: Configuring as mouse
[ 17738.874] (II) evdev: A..... G3: Configuring as keyboard
[ 17738.874] (II) evdev: A..... G3: Adding scrollwheel support
[ 17738.874] (**) evdev: A..... G3: YAxisMapping: buttons 4 and 5
[ 17738.874] (**) evdev: A..... G3: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 17738.874] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:E0FF:0002.0004/input/input8/event6"
[ 17738.874] (II) XINPUT: Adding extended input device "A..... G3" (type: KEYBOARD, id 12)
[ 17738.874] (**) Option "xkb_rules" "evdev"
[ 17738.874] (**) Option "xkb_model" "pc104"
[ 17738.874] (**) Option "xkb_layout" "se"
[ 17738.874] (II) evdev: A..... G3: initialized for relative axes.
[ 17738.874] (WW) evdev: A..... G3: ignoring absolute axes.
[ 17738.874] (**) A..... G3: (accel) keeping acceleration scheme 1
[ 17738.874] (**) A..... G3: (accel) acceleration profile 0
[ 17738.874] (**) A..... G3: (accel) acceleration factor: 2.000
[ 17738.874] (**) A..... G3: (accel) acceleration threshold: 4
[ 17738.874] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event13)
[ 17738.874] (II) No input driver specified, ignoring this device.
[ 17738.874] (II) This device may have been added with another device file.
[ 17738.875] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event12)
[ 17738.875] (II) No input driver specified, ignoring this device.
[ 17738.875] (II) This device may have been added with another device file.
[ 17738.875] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event11)
[ 17738.875] (II) No input driver specified, ignoring this device.
[ 17738.875] (II) This device may have been added with another device file.
[ 17738.875] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event10)
[ 17738.875] (II) No input driver specified, ignoring this device.
[ 17738.875] (II) This device may have been added with another device file.
[ 17738.875] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event9)
[ 17738.875] (II) No input driver specified, ignoring this device.
[ 17738.875] (II) This device may have been added with another device file.
[ 17738.875] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event8)
[ 17738.875] (II) No input driver specified, ignoring this device.
[ 17738.875] (II) This device may have been added with another device file.
[ 17738.875] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event7)
[ 17738.876] (II) No input driver specified, ignoring this device.
[ 17738.876] (II) This device may have been added with another device file.
[ 17738.876] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event14)
[ 17738.876] (II) No input driver specified, ignoring this device.
[ 17738.876] (II) This device may have been added with another device file.
[ 17738.876] (II) config/udev: Adding input device PC Speaker (/dev/input/event15)
[ 17738.876] (II) No input driver specified, ignoring this device.
[ 17738.876] (II) This device may have been added with another device file.
[ 17739.315] (II) intel(0): EDID vendor "BNQ", prod id 32517
[ 17739.315] (II) intel(0): Using EDID range info for horizontal sync
[ 17739.315] (II) intel(0): Using EDID range info for vertical refresh
[ 17739.315] (II) intel(0): Printing DDC gathered Modelines:
[ 17739.315] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 17739.315] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 17739.315] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 17739.315] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 17739.315] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 17739.315] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 17739.315] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 17739.315] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 17739.315] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 17739.315] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 17739.315] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 17739.315] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 17739.316] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 17739.316] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 17739.316] (II) intel(0): Modeline "640x480"x100.0 43.16 640 680 744 848 480 481 484 509 -hsync +vsync (50.9 kHz e)
[ 17739.316] (II) intel(0): Modeline "640x480"x120.0 52.41 640 680 744 848 480 481 484 515 -hsync +vsync (61.8 kHz e)
[ 17739.316] (II) intel(0): Modeline "800x600"x100.0 68.18 800 848 936 1072 600 601 604 636 -hsync +vsync (63.6 kHz e)
[ 17739.316] (II) intel(0): Modeline "800x600"x0.0 73.25 800 848 880 960 600 603 607 636 +hsync -vsync (76.3 kHz e)
[ 17739.316] (II) intel(0): Modeline "1024x768"x100.0 113.31 1024 1096 1208 1392 768 769 772 814 -hsync +vsync (81.4 kHz e)
[ 17739.316] (II) intel(0): Modeline "1024x768"x0.0 115.50 1024 1072 1104 1184 768 771 775 813 +hsync -vsync (97.6 kHz e)
[ 17739.316] (II) intel(0): Modeline "1440x900"x0.0 182.75 1440 1488 1520 1600 900 903 909 953 +hsync -vsync (114.2 kHz e)
[ 17739.316] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 17739.316] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 17739.316] (II) intel(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 17739.316] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 17739.316] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 17739.316] (II) intel(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 17739.316] (II) intel(0): Modeline "1440x240"x0.0 27.00 1440 1478 1602 1716 240 244 247 262 -hsync -vsync (15.7 kHz e)
[ 17739.316] (II) intel(0): Modeline "1440x288"x0.0 27.00 1440 1464 1590 1728 288 290 293 312 -hsync -vsync (15.6 kHz e)
[ 17739.316] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 17739.316] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
It would be nice to find out why the settings was being set to "0".
Last edited by Sne (2014-04-29 20:40:50) -
[SOLVED] SLiM env switching doesn't work
Hello,
so today I wanted to try a different desktop environment, I already had set everything up a while ago in the slim.conf and xinitrc but the F1 doesn't do anything and it always starts a xfce session.
The thing is though, that back then when I actually changed the 2 configs the switching worked fine and according to the SLiM article on the arch wiki nothing has changed in the way how you configure this.
So is this a bug in recent version or did the config file format change or the files you need to modify?
thanks in advance!
Last edited by pfannkuchen_gesicht (2014-01-04 00:08:52)there is nothing listed at all and when pressing F1 nothing happens either, when in the past the selected DEs name showed up on screen.
my .xinitrc looks exactly like the example on the SLiM archwiki page, just without the entries of the other DEs I don't have installed. I am also pretty sure it's not even an issue of the xinitrc since SLiM doesn't even display any DEs, it just starts xfce after entering the password.
EDIT: hm, I think the "sessiondir" setting was just missing, readded that and now it works. Odd though that it wasn't there anymore.
Last edited by pfannkuchen_gesicht (2014-01-03 23:14:35) -
[SOLVED] External USB mouse doesn't work
I've installed Arch on my laptop and today faced with a problem. When I boot with AC off my external USB mouse doesn't work. Also it looks like USB ports don't work. If I detached AC when working mouse works fine.
I can suppose there is some problem with laptop mode. May be it turns off usb ports to save energy. Anyway quick search doesn't brings any results. If someone give me a hint how to solve this problem I'll be very grateful.
Last edited by avli (2011-07-14 16:53:15)Well, after diving into configs solution has been founded. The point was to disable auto suspend feature in laptop-mode-tools config by setting BATT_SUSPEND_USB variable to 0 in /etc/laptop-mode/conf.d/usb-autosuspend.conf
Hope this information will be helpful for users who probably faced with the same problem. Thank you! -
[solved] remove grub timeout doesn't work
i am trying to remove the grub timeout by editing /etc/default/grub and setting grub_timeout to 0, but it doesn't work, is there anything else i should change?
p.s. should i run grub-mkconfig?
Last edited by aldoiljazi (2013-09-18 07:35:11)okay i run 'sudo grub-mkconfig'
this is my /etc/default/grub
GRUB_DEFAULT=0
GRUB_TIMEOUT=0
GRUB_DISTRIBUTOR="Arch"
GRUB_CMDLINE_LINUX_DEFAULT="quiet"
GRUB_CMDLINE_LINUX=""
# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos"
# Uncomment to enable Hidden Menu, and optionally hide the timeout count
#GRUB_HIDDEN_TIMEOUT=5
#GRUB_HIDDEN_TIMEOUT_QUIET=true
# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console
# Uncomment to disable graphical terminal
#GRUB_TERMINAL_OUTPUT=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
GRUB_GFXMODE=auto
# Uncomment to allow the kernel use the same resolution used by grub
GRUB_GFXPAYLOAD_LINUX=keep
# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
GRUB_DISABLE_RECOVERY=true
# Uncomment and set to the desired menu colors. Used by normal and wallpaper
# modes only. Entries specified as foreground/background.
#GRUB_COLOR_NORMAL="light-blue/black"
#GRUB_COLOR_HIGHLIGHT="light-cyan/blue"
# Uncomment one of them for the gfx desired, a image background or a gfxtheme
#GRUB_BACKGROUND="/path/to/wallpaper"
#GRUB_THEME="/path/to/gfxtheme"
# Uncomment to get a beep at GRUB start
#GRUB_INIT_TUNE="480 440 1"
#GRUB_SAVEDEFAULT="true"
and this is my /boot/grub/grub.cfg
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 6b44daaa-610c-4f23-a632-569d091e4d43
else
search --no-floppy --fs-uuid --set=root 6b44daaa-610c-4f23-a632-569d091e4d43
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_input console
terminal_output gfxterm
set timeout=5
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-6b44daaa-610c-4f23-a632-569d091e4d43' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 6b44daaa-610c-4f23-a632-569d091e4d43
else
search --no-floppy --fs-uuid --set=root 6b44daaa-610c-4f23-a632-569d091e4d43
fi
echo 'Loading Linux core repo kernel ...'
linux /boot/vmlinuz-linux root=UUID=6b44daaa-610c-4f23-a632-569d091e4d43 rw quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux.img
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
### BEGIN /etc/grub.d/60_memtest86+ ###
### END /etc/grub.d/60_memtest86+ ###
p.s. i didn't think you needed those, because i thought they had default values.
edit: i guess i need 'grub-mkconfig -o /boot/grub/grub.cfg '
Last edited by aldoiljazi (2013-09-18 07:31:39) -
[SOLVED]kdeplasma-applets-menubar doesn't work.
I've just installed the following applications:
kdeplasma-applets-menubar,
libdbusmenu,
libdbusmenu-qt,
appmenu-gtk,
appmenu-qt.
But kdeplasma-applets-menubar doesn't work on my KDE4.10. The menu still show in the window and the applet only has the onmipresent "File" menu.
Last edited by mert (2013-06-22 14:22:20)Go to 'System Settings' -> 'Application Appearance' -> 'Style' -> 'Fine Tuning' and change 'Menubar style' to 'Only export'. Just checked, works fine with qt applications.
I'm not sure about gtk apps, though. I recall reading somewhere that, in addition to installing appmenu-gtk and its dependencies, one needed to specify something in the .gtkrc and/or .config/gtk-3.0/settings.ini file(s). Well that or my memory might just be playing tricks on me.
EDIT:
If for some reason gtk apps refuse to export their menus, you might want to look at this webupd8 article. Good luck!
Last edited by andy_v (2013-06-22 12:36:50) -
[Solved] archiso UEFI boot doesn't work.
I just followed the instruction on https://wiki.archlinux.org/index.php/UE … B_from_ISO, but it doesn't work as intended. It shows just 3 menu,
Arch Linux archiso x86_64 UEFI USB
UEFI Shell x86_64 v1
UEFI Shell x86_64 v2
I thought, the first option is the way to go, but
Error loading \arch\boot\x86_64\vmlinuz: Not found
In fact, there is no \arch directory. The iso file downloaded was not broken, so I think something's missing either in the article or in the iso file.
edit : I found that, the name of 'arch' directory was changed to something like "?????????". I don't know why, but when I changed it to "arch" again, it works like a charm.
Last edited by kreoso (2012-11-01 16:54:57)Exactly the same thing happened to me. I think there's some filename encoding issue because I wasn't able to rename ????????? to arch, instead I moved to arch2 then renamed arch2 to arch. Happy to say that worked for me too.
I should add that the same USB stick worked first time with my laptop, it was only when trying to boot my desktop in the same way that I hit this issue, so it seems sensitive to BIOS manufacturer/version.
Last edited by malcolmsparks (2012-11-04 19:46:32) -
[Solved] ASUS F3Ka bluetooth doesn't work
Hi everybody!
Can anybody help me with getting bluetooth to work on ASUS F3Ka please?
Here is the dmesg output:
[n0ne@darkstar ~]$ dmesg | grep Blue
Bluetooth: Core ver 2.11
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.9
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
I've got bluetooth daemon in my DAEMONS array in /etc/rc.conf
BUT it still doesn't work:
[n0ne@darkstar ~]$ sudo -s
[root@darkstar ~]# hcitool inq
Inquiring ...
Inquiry failed.: No such device
Any ideas, please?
Last edited by alcazoid (2008-03-29 22:48:00)some stuff ive noticed with laptops and bluetooth...
- bluetooth/wireless works in a lenovo i recently installed ubuntu in only after I suspend to ram. This is due to some weird Radio kill switch bug
- sometimes leaving bluetooth and wireless turned on on wiindows has its effects in linux, because windows drivers sometimes do not release control of the hardware. So try a cold boot, and if that doesn't work, a reboot from windows...'
- try variants of leaving the bluetooth switch on/off during the boot process
none of these actually seem like logical solutions, but thats how bluetooth/wireless and linux sometimes is..good luck! -
[SOLVED] openbox menu command doesn't work with &&
I'm now using openbox-session only.
I'd like to run a program after something was done correctly:
zenity --question && killall openbox
I used "obmenu" and it seems that it fixes & to & correctly in the menu.xml.
However, the previous command "zenity" is run only.
In terminal, there's no problem, but it doesn't work with "command" in openbox menu.
<item label="Exit">
<action name="Execute">
<execute>
zenity --question --title="Exit" --text="Are you sure to go back to console?" && killall openbox
</execute>
</action>
</item>
Please, give me any idea. Thank you.
Last edited by mairoo (2009-09-09 10:06:17)hbekel wrote:
You'll need to use a shell explicitly:
<execute>
sh -c 'command1 && command2'
</execute>
I flagged "solved" thanks to your help. It works good. Thank you. -
(SOLVED) Lock screen suddenly doesn't work as expected
It doesn't matter which lock screen (PIN, swipe, etc.) I choose, after the first unlock (after a reboot or change of lock screen), the phone no longer locks. Using the power button to lock doesn't work and I have the phone set to lock right away on sleep. It was working fine a few hours ago and there wasn't anything new I did to the phone.
Any ideas?
Solved!
Go to Solution.Hello, I feel pretty dumb. I must've hit the "Disable lock screen" option in the BatteryBot Pro app by accident...I forgot it even had that option.
If anyone's curious how I solved this, I inspected system messages using OS Monitor while reproducing the problem (ie, flipping through lock screen options and turning off/on the screen) and kept seeing the app's name coming up as well as a few others. I'm not sure why it started disabling the lock screen today though; I'm pretty sure I didn't touch the app in the last couple days.
Anyway, sorry for any inconvenience.
Maybe you are looking for
-
MainMenu:correct date on calendar icon, but temp is wrong on weather icon
Is there a way i can make this right?
-
Select statment in transaction
Hi, Is it possible to put a Select statement in the transaction?? So that the record which is selected from a particular table is write protected. Thanks Ashwin
-
How can I make it so I'm not required to activate addons for each website?
With the new firefox patch last week, every time I go to a website with a pdf I have to click to allow adobe acrobat unless I want to use firefox's crappy pdf reader. Same for other addons like silverlight, java, etc. Is there any way to avoid clicki
-
Where does a movie go after I choose download later while redeeming a code?
Hello All, I was redeeming a code for "The Cabin in the Woods" blu-ray and it was successful. However, I chose to save the download for later because I had a couple of other movies downloading and now I can't find it to download it. I can see the fil
-
Can't set default java for Mozilla in java control panel
OK. It was fine before installation of SE 6u5. Now Sun java works ok in IE7 but not in Firefox 2.0.0.8. THe problem is obviously in the java control panel that sun java is set as default java for MS IE, but not Mozilla. Here is my question: I used to